Document Center List of Standards on Plugs, Socket-Outlets, Couplers
ICS Code 29.120.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B794 - Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- ASTM-E2181 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
BSI:
- BIP-2074 - Electrical plugs and wiring and world electricity supplies
- BS-1363 - Specification for 13 A fused plugs and switched and unswitched socket-outlets
- BS-1363-1-TC - Tracked Changes. 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-2 - 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-2-TC - Tracked Changes. 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-3 - 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-4 - 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-4-TC - Tracked Changes. 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-5 - 13 A plugs, socket-outlets, adaptors and connection units
- BS-1363-5-TC - Tracked Changes. 13 A plugs, socket-outlets, adaptors and connection units
- BS-196 - Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts
- BS-3170 - Specification for flexible couplings for power transmission
- BS-3454 - Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines
- BS-3905 - Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines.
- BS-4491-2.1 - Appliance couplers for household and similar general purposes. Specification of requirements for individual types of coupler. Sewing machine couplers
- BS-4573 - Specification for 2-pin reversible plugs and shaver socket-outlets
- BS-5057 - Specification for flat, quick-connect terminations
- BS-5125 - Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines
- BS-546 - Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors
- BS-546-S-1 - Specification for plugs made of resilient material
- BS-5550-7.5.4 - Cinematography. Production and presentation. Film and television location lighting
- BS-61535 - Installation Couplers Intended for Permanent Connection in Fixed Installations
- BS-6312 - Specification for plugs for use with British Telecommunications line jack units
- BS-6972 - Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
- BS-6991 - Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
- BS-7001 - Specification for interchangeability and safety of a standardized luminaire supporting coupler
- BS-7288 - Specification for residual current devices with or without overcurrent protection for socketoutlets for household and similar uses
- BS-7288-TC - Tracked Changes. Specification for residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- BS-8546 - Travel adaptors compatible with UK plug and socket system. Specification
- BS-9540 - Sectional specification for airframe-fit circular electrical connectors of assessed quality for low-frequency a.c. and d.c. applications (including engine connectors): requirements for design, performance and testing, and rules for the preparation of detail specifications
- BS-EN-16840 - Inland navigation vessels. Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
- BS-EN-50250 - Conversion adaptors for industrial use
- BS-EN-50521 - Connectors for photovoltaic systems. Safety requirements and tests
- BS-EN-50546 - Railway applications. Rolling Stock. Three-phase shore (external) supply system for rail vehicles and its connectors
- BS-EN-60309-1 - Plugs, socket-outlets and couplers for industrial purposes
- BS-EN-60309-2 - Plugs, socket-outlets and couplers for industrial purposes
- BS-EN-60309-4 - Plugs, socket-outlets and couplers for industrial purposes
- BS-EN-60320-1 - Appliance couplers for household and similar general purposes
- BS-EN-60320-2-1 - Appliance couplers for household and similar general purposes. Specification of requirements for individual types of coupler
- BS-EN-60320-2-3 - Appliance couplers for household and similar general purposes
- BS-EN-60320-3 - Appliance couplers for household and similar general purposes
- BS-EN-60526 - High-voltage cable plug and socket connections for medical X-ray equipment
- BS-EN-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-1-TC - Tracked Changes. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-2-TC - Tracked Changes. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-60309-1 - Plugs, socket-outlets and couplers for industrial purposes
- BS-EN-IEC-60309-2 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes
- BS-EN-IEC-60309-4-TC - Tracked Changes. Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes
- BS-EN-IEC-60309-5 - Plugs, socket-outlets and couplers for industrial purposes
- BS-EN-IEC-60320-1 - Appliance couplers for household and similar general purposes
- BS-EN-IEC-60320-2-1 - Appliance couplers for household and similar general purposes
- BS-EN-IEC-60320-2-1-TC - Tracked Changes. Appliance couplers for household and similar general purposes
- BS-EN-IEC-60320-2-3 - Appliance couplers for household and similar general purposes
- BS-EN-IEC-60799 - Electrical accessories. Cord sets and interconnection cord sets
- BS-EN-IEC-60799-TC - Tracked Changes. Electrical accessories. Cord sets and interconnection cord sets
- BS-EN-IEC-61300-3-45 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-IEC-61300-3-45-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-IEC-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-3-TC - Tracked Changes. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-6 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62613-1 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems)
- BS-EN-IEC-62613-2 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems)
- BS-IEC-61586 - Estimation of the reliability of electrical connectors
- BS-IEC-62613-1 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems). General requirements
- BS-IEC-62613-2 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems). Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
- BS-ISO-15217 - Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
- PAS-003 - Non-rewireable 13 A plugs with plastic socket shutter opening pins
- PD-CLC-ROBT-005 - Information concerning plugs for household appliances covered by CLC/TC 61 used in various CENELEC countries
- PD-IEC-61586 - Estimation of the reliability of electrical connectors
- PD-IEC-62196-3-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- PD-IEC-62225 - Guidance on terms for connectors and mechanical structures in electronic equipment
- PD-IEC-62735-1 - Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices
- PD-IEC-62735-2 - Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices
- PD-IEC-63066 - Low-voltage docking connectors for removable energy storage units
- PD-IEC-63236-1 - Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices
- PD-IEC-PAS-63454 - Conductive charging of electric vehicles. DC vehicle coupler configuration GG
IEC:
- IEC-60083 - Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
- IEC-60309-1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
- IEC-60309-1-1 - Corrigendum 1 - Amendment 1 - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
- IEC-60309-1-2 - Amendment 2 - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
- IEC-60309-2 - Plugs, fixed or portable socket-outlets and appliance inelts for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
- IEC-60309-2-1 - Amendment 1 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
- IEC-60309-2-AM2 - Amendment 2 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
- IEC-60309-4 - Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
- IEC-60309-4-AM1 - Amendment 1 - Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
- IEC-60309-5 - Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)
- IEC-60320-1 - Appliance couplers for household and similar general purposes - Part 1: General requirements
- IEC-60320-1-1 - Amendment 1 - Appliances couplers for household and similar general purposes - Part 1: General requirements
- IEC-60320-1-AM1 - Amendment 1 - Appliance couplers for household and similar general purposes - Part 1: General requirements
- IEC-60320-1 CMV - Appliance couplers for household and similar general purposes - Part 1: General requirements
- IEC-60320-1-CMV - Appliance couplers for household and similar general purposes - Part 1: General requirements
- IEC-60320-2-1 - Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
- IEC-60320-2-2 - Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
- IEC-60320-2-3 - Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
- IEC-60320-2-3-1 - Amendment 1 - Appliance coupler for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0
- IEC-60320-2-3-RL - Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
- IEC-60320-2-4 - Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement
- IEC-60320-2-4-RL - Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement
- IEC-60320-3 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
- IEC-60320-3-AM1 - Amendment 1 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
- IEC-60320-3-AM2 - Amendment 2 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
- IEC-60799 - Electrical accessories - Cord sets and interconnection cord sets
- IEC-60884-1 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
- IEC-60884-1-1 - Amendment 1 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
- IEC-60884-1-2 - Amendment 2 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
- IEC-60884-2-1 - Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs
- IEC-60884-2-2 - Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances
- IEC-60884-2-3 - Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
- IEC-60884-2-4 - Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
- IEC-60884-2-5 - Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors
- IEC-60884-2-6 - Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations
- IEC-60884-2-7 - Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
- IEC-60884-2-7-AM1 - Amendment 1 - Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
- IEC-60884-3-1 - Plugs and socket-outlets for household and similar purposes - Part 3-1: Particular requirements for socket-outlets incorporating USB power supply
- IEC-60906-1 - IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
- IEC-60906-2 - IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
- IEC-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- IEC-62196-1 CMV - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- IEC-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
- IEC-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
- IEC-62196-3-1 - Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
- IEC-62196-4 - Plugs, socket-outlets, vehicle connectors and vehicles inlet - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for class II or class III applications
- IEC-62196-6 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
- IEC-62613-1 - Plugs, socket-outlets and ship couplers for high-voltage shore connection (HVSC) systems - Part 1: General requirements
- IEC-62613-2 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
- IEC-62735-1 - Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 1: Plug and socket-outlet system for 2,6 kW
- IEC-62735-2 - Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 2: Plug and socket-outlet system for 5,2 kW
- IEC-63066 - Low-voltage docking connectors for removable energy storage units
- IEC-63236-1 - Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 1: 2,6 kW system
- IEC-63236-2 - Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 2: 5,2 kW system
- IEC-63236-3 - Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 3: AC/DC appliance inlet
- IEC-807-6 - Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types
- IEC-884-2-5 - Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors
- IEC-906-3 - IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.
- IEC/PAS-63454 - Conductive charging of electric vehicles - DC vehicle coupler configuration GG
- IEC/PAS-63472 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler
Other SDOs:
- EN-16840 - Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
- EN-50521 - Connectors for Photovoltaic Systems - Safety Requirements & Tests
- EN-60309-1 - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
- EN-60309-2 - Dimensional Interchangeability Requirements for Pin and Contact Tube Accessories of Ha
- EN-60309-4 - Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
- EN-60320-1 - Appliance couplers for household and similar general purposes - Part 1: General requirements
- EN-60320-2-3 - Appliance Coupler With a Degree of Protection Higher Than Ipxo
- EN-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- EN-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- EN-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
- EN-62271-102 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- EN-IEC-62613-1 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements
- EN-IEC-62613-2 - Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
- EN-ISO-17132 - Paints & Varnishes, T-Bend Test
- SS-EN-15869-2 - Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements
- SS-EN-16840 - Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
- SS-ETS-300113 - Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and havingan antenna connector