Document Center List of Standards on Connecting Devices
ICS Code 29.120.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B362 - Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM-B389 - Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM-B478 - Standard Test Method for Cross Curvature of Thermostat Metals
- ASTM-B539 - Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
- ASTM-B812 - Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
- ASTM-B845 - Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
- ASTM-B854 - Standard Guide for Measuring Electrical Contact Intermittences
- ASTM-B868 - Standard Practice for Contact Performance Classification of Electrical Connection Systems (Withdrawn 2017)
- ASTM-B913 - Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
- ASTM-B942 - Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
- ASTM-F1835 - Standard Guide for Cable Splicing Installations
- ASTM-F458 - Standard Practice for Nondestructive Pull Testing of Wire Bonds (Withdrawn 2023)
- ASTM-F459 - Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds (Withdrawn 2023)
BSI:
- BS-3214 - Specification for locking connectors for battery operated vehicles (320 ampere rating)
- BS-3283-1 - Specification for 13 a Connector and Appliance Inlet
- BS-3288-1 - Insulator and conductor fittings for overhead power lines
- BS-3288-2 - Insulator and conductor fittings for overhead power lines
- BS-442 - Specification for terminals for electrical apparatus for railway signalling purposes
- BS-4579-1 - Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in copper conductors
- BS-4579-2 - Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in nickel, iron and plated copper conductors
- BS-4579-3 - Specification for performance of mechanical and compression joints in electric cable and wire connectors. Mechanical and compression joints in aluminium conductors
- BS-6516-2 - Specification for Solderless Crimped Connections (Includingtest Methods and Practical
- BS-6910-1 - Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c.
- BS-7197 - Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
- BS-7609 - Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors
- BS-7727 - Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2
- BS-7888-1 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). General
- BS-7888-2 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Methods of test
- BS-7888-3 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Test requirements for LV accessories
- BS-7888-4.1 - Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
- BS-7888-4.2 - Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
- BS-91 - Electric cable soldering sockets. Specification
- BS-951 - Electrical earthing. Clamps for earthing and bonding. Specification
- BS-CECC-299001 - Technology approval schedule. Manufacture of electrical connectors
- BS-EN-3645-008 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous
- BS-EN-50146 - Cable ties for electrical installations
- BS-EN-50250 - Conversion adaptors for industrial use
- BS-EN-50393 - Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
- BS-EN-50393-TC - Tracked Changes. Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
- BS-EN-50467 - Railway applications. Rolling stock. Electrical connectors, requirements and test methods
- BS-EN-60320-2-4 - Appliance couplers for household and similar general purposes
- BS-EN-60352-1 - Solderless connections
- BS-EN-60352-7 - Solderless connections
- BS-EN-60998-1 - Connecting devices for low-voltage circuits for household and similar purposes
- BS-EN-60998-2-4 - Connecting devices for low voltage circuits for household and similar purposes
- BS-EN-60999-1 - Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units
- BS-EN-60999-2 - Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units
- BS-EN-61169-8 - Radio-frequency connectors
- BS-EN-61534-1 - Powertrack systems
- BS-EN-61534-21 - Powertrack systems
- BS-EN-61534-22 - Powertrack systems
- BS-EN-61666 - Industrial systems, installations and equipment and industrial products. Identification of terminals within a system
- BS-EN-61914-TC - Tracked Changes. Cable cleats for electrical installations
- BS-EN-61995-1 - Devices for the connection of luminaires for household and similar purposes
- BS-EN-61995-2 - Devices for the connection of luminaires for household and similar purposes
- BS-EN-IEC-60320-2-4 - Appliance couplers for household and similar general purposes
- BS-EN-IEC-60352-3 - Solderless connections
- BS-EN-IEC-60352-4 - Solderless connections
- BS-EN-IEC-60352-6-TC - Tracked Changes. Solderless connections
- BS-EN-IEC-60352-7 - Solderless connections
- BS-EN-IEC-60352-9 - Solderless connections
- BS-EN-IEC-61238-1-2 - Compression and mechanical connectors for power cables
- BS-EN-IEC-61914 - Cable cleats for electrical installations
- BS-HD-629.1-S3 - Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
- BS-IEC-60313 - Coaxial connectors used in nuclear laboratory instrumentation
- DD-CLC-50467 - Railway applications. Rolling stock. Electrical connectors, requirements and test methods
IEC:
- IEC-1545 - Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
- IEC-352-3 - Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
- IEC-352-4 - Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance
- IEC-60320-2-4 - Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement
- IEC-60320-2-4/A1 - Amendment 1 - Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement
- IEC-60352-1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
- IEC-60352-3 - Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
- IEC-60352-4 - Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
- IEC-60352-4-1 - Amendment 1
- IEC-60352-6 - Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
- IEC-60352-9 - Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance
- IEC-60570 - Electrical supply track systems for luminaires
- IEC-60570-1 - Amendment 1 - Electrical supply track systems for luminaires
- IEC-60998-1 - Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
- IEC-60998-2-1 - Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
- IEC-60998-2-2 - Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
- IEC-60998-2-3 - Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
- IEC-60998-2-4 - Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices
- IEC-60998-2-5 - Part 2-5: Particular Requirements for Connecting Boxes (Junction 7/or Tapping) for Termina
- IEC-60999-1 - Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
- IEC-60999-2 - Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
- IEC-61169-8 - Part 8: Sectional Specification - Rf Coaxial Connectors With Inner Diameter of Outer C
- IEC-61210 - Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
- IEC-61497 - Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation
- IEC-61534-21 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
- IEC-61534-21-AM1 - Amendment 1 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
- IEC-61534-22 - Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
- IEC-61534-22-AM1 - Amendment 1 - Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
- IEC-61914 - Cable cleats for electrical installations
- IEC-61914 CMV - Cable cleats for electrical installations
- IEC-61914-RL - Cable cleats for electrical installations
- IEC-61995-1 - Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements
- IEC-61995-1-AM1 - Amendment 1 - Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements
- IEC-61995-2 - Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL
- IEC-61995-2-AM1 - Amendment 1 - Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL
- IEC-62986 - Plugs, socket-outlets and couplers with arcuate contacts
Other SDOs:
- EN-3645-008 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 Degrees C or 200 Degrees C continuous - Part 008: Non release plug with grounding ring - Product standard
- EN-50250 - Conversion adaptors for industrial use
- EN-50393 - Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
- EN-60320-2-4 - Part 2-4: Appliance Couplers Dependent on Appliance Weight for Engagement, Appliance C
- EN-60998-2-4 - Connecting Devices for Low Voltage Circuits for Household & Similar Purposes, Particu
- EN-61169-8 - Radio-Frequency Connectors, Sectional Specification, Rf Coaxial Connectors With Inner
- EN-61210 - Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
- EN-61534-21 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
- EN-61534-22 - Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
- EN-61995-1 - Devices for the Connection of Luminaires for Household & Similar Purposes, General Req
- EN-61995-2 - Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL
- JIS-C-2805 - Crimp-type terminal lugs for copper conductors
- JIS-C-2806 - Non-insulated crimp-type sleeves for copper conductors
- JIS-C-2807 - Insulated closed-end connectors
- JIS-C-2814-2-1 - Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
- JIS-C-2814-2-2 - Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
- JIS-C-2814-2-3 - Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
- JIS-C-2814-2-4 - Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-4: Particular requirements for twist-on connecting devices
- JIS-C-8365 - Junction box for indoor wiring (for 600 V polyvinyl chloride insulated and sheathed cables:VVF)
- SS-ISO-8056-2 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 2: Terminations - General requirements and tests