Document Center List of Standards on Insulators Including Fittings And Other Components For Insulators
ICS Code 29.080.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-3288-1 - Insulator and conductor fittings for overhead power lines
- BS-3288-3 - Insulator and conductor fittings for overhead power lines
- BS-3288-4 - Insulator & Conductor Fittings for Overhead Power Lines, Locking Devices for Ball & So
- BS-3297-2 - Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
- BS-3297-3 - Post Insulators of Ceramic Material or Glass for Nominal Voltages Greater Than 1000 V Part 3: Guide to Insulator Practice
- BS-4215-1 - Resistance spot welding electrodes, electrode holders and ancillary equipment
- BS-456 - Specification for dimensions of track circuit insulation
- BS-4963 - Specification for tests on hollow insulators for use in high voltage electrical equipment
- BS-7744 - Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems
- BS-7803 - Guide to insulators of ceramic material or glass for overhead-lines with a nominal voltage greater then 1000 V, puncture testing
- BS-EN-27931 - Specification for insulation caps and bushes for resistance welding equipment
- BS-EN-50151 - Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators
- BS-EN-60168 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V
- BS-EN-60507 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
- BS-EN-60660 - Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
- BS-EN-61109 - Insulators for overhead lines. Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
- BS-EN-61211 - Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V. Impulse puncture testing in air
- BS-EN-61264 - Ceramic Pressurized Hollow Insulators for High-Voltage Switchgear & Controlgear
- BS-EN-61462 - Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations
- BS-EN-61466-1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V
- BS-EN-61466-1-TC - Tracked Changes. Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V
- BS-EN-61466-2 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V
- BS-EN-61467 - Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1000 V. AC power arc tests
- BS-EN-61952 - Insulators for overhead lines. Composite line post insulators for A.C. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
- BS-EN-62155 - Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
- BS-EN-62217 - Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
- BS-EN-62223 - Insulators. Glossary of terms and definitions
- BS-EN-62231 - Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV. Definitions, test methods and acceptance criteria
- BS-EN-62231-1 - Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV
- BS-EN-62621 - Railway applications. Fixed installations. Electric traction. Specific requirements for composite insulators used for overhead contact line systems
- BS-EN-62772 - Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria
- BS-EN-IEC-60120 - Ball and socket couplings of string insulator units. Dimensions
- BS-EN-IEC-60305 - Insulators for overhead lines with a nominal voltage above 1 000 V. Ceramic or glass insulator units for AC systems. Characteristics of insulator units of the cap and pin type
- BS-EN-IEC-60372 - Locking devices for ball and socket couplings of string insulator unit. Dimensions and tests
- BS-EN-IEC-60383-1 - Insulators for overhead lines with a nominal voltage above 1000 V
- BS-EN-IEC-60383-1-TC - Tracked Changes. Insulators for overhead lines with a nominal voltage above 1000 V
- BS-EN-IEC-60433 - Insulators for overhead lines with a nominal voltage above 1 000 V. Ceramic insulators for AC systems. Characteristics of insulator units of the long rod type
- BS-EN-IEC-60437 - Radio interference test on high-voltage insulators
- BS-EN-IEC-60437-TC - Tracked Changes. Radio interference test on high-voltage insulators
- BS-EN-IEC-60471 - Clevis and tongue couplings of string insulator units. Dimensions
- BS-EN-IEC-61462 - Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V. Definitions, test methods, acceptance criteria and design recommendations
- BS-EN-IEC-61952-1 - Insulators for overhead lines. Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V
- BS-EN-IEC-62772 - Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria
- BS-IEC-62896-TC - Tracked Changes. Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC. Definitions, test methods and acceptance criteria
- DD-IEC-60815-1 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
- DD-IEC-60815-2 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
- DD-IEC-60815-3 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
- DD-IEC-62371 - Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
- PD-CLC-62662 - Measurement procedures for materials used in photovoltaic modules
- PD-IEC-61245 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
- PD-IEC-62039 - Selection guidelines for polymeric materials for outdoor use under HV stress
- PD-IEC-62073 - Guidance on the measurement of hydrophobicity of insulator surfaces
- PD-IEC-62730 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000 h test
- PD-IEC-62896 - Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria
IEC:
- IEC-120 - Dimensions of ball and socket couplings of string insulator units
- IEC-1245 - Artificial pollution tests on high-voltage insulators to be used on d.c. systems
- IEC-1325 - Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
- IEC-273 - Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
- IEC-305 - Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
- IEC-372 - Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
- IEC-372-1 - Amendment No. 1
- IEC-383-1 - Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
- IEC-383-2 - Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
- IEC-471 - Clevis and tongue couplings of string insulator units - Dimensions
- IEC-471-1 - Amendment No. 1
- IEC-575 - Thermal-mechanical performance test and mechanical performance test on string insulator units
- IEC-60120 - Ball and socket couplings of string insulator units - Dimensions
- IEC-60168 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
- IEC-60168-1 - Amendment No. 1
- IEC-60168-2 - Amendment 2
- IEC-60305 - Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type
- IEC-60305-RL - Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type
- IEC-60372 - Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
- IEC-60372-2 - Amendment 2
- IEC-60383-1 - Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
- IEC-60433 - Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type
- IEC-60433-RL - Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type
- IEC-60437 - Radio interference test on high-voltage insulators
- IEC-60437-CMV - Radio interference test on high-voltage insulators
- IEC-60471 - Clevis and tongue couplings of string insulator units - Dimensions
- IEC-60507 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
- IEC-60660 - Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
- IEC-60815-1 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
- IEC-60815-2 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems
- IEC-60815-3 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
- IEC-60815-4 - Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems
- IEC-61109 - Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
- IEC-61211 - Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air
- IEC-61245 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
- IEC-61462 - Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recommendations
- IEC-61466-1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength and end fittings
- IEC-61466-2 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
- IEC-61466-2-1 - Amendment 1
- IEC-61466-2-AM2 - Amendment 2 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
- IEC-61467 - Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
- IEC-61952 - Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
- IEC-61952-1 - Insulators for overhead lines - Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V - Part 1: definitions, end fittings and designations
- IEC-62039 - Selection guidelines for polymeric materials for outdoor use under HV stress
- IEC-62073 - Guidance on the measurement of hydrophobicity of insulator surfaces
- IEC-62155 - Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
- IEC-62217 - Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
- IEC-62223 - Insulators - Glossary of terms and definitions
- IEC-62231 - Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
- IEC-62231-1 - Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics
- IEC-62371 - Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
- IEC-62662 - Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
- IEC-62730 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
- IEC-62730-AM1 - Amendment 1 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
- IEC-62772 - Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
- IEC-62772-RL - Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
- IEC-62896 - Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria
- IEC-720 - Characteristics of line post insulators
- IEC-797 - Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric
Other SDOs:
- EN-27931 - Specification for Insulation Caps & Bushes for Resistance Welding Equipment
- EN-50151 - Railway Applications - Fixed Installations - Electric Traction - Special Requirements
- EN-60507 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
- EN-61109 - Insulators for Overhead Lines, Composit Suspension & Tension Insulators for a.C. Syste
- EN-61462 - Composite Hollow Insulators, Pressurized & Unpressurized Insulators for Use in Electri
- EN-61466-1 - Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings
- EN-61466-2 - Composite String Insulator Units for Overhead Lines With a Nominal Voltage Greater THA
- EN-61467 - Insulators for Overhead Lines, Insulator Strings & Sets for Lines With a Nominal Volt
- EN-61952 - Insulators for Overhead Lines, Composite Line Post Insulators for a.C. Systems With A
- EN-62217 - Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
- EN-62223 - Insulators - Insulators Glossary of Terms & Definitions
- EN-62231 - Composite Station Post Insulators for Substations With a.C. Voltages Greater Than 1 0
- EN-62231-1 - Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics
- EN-62772 - Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500V- Definitions, test methods and acceptance criteria
- EN-IEC-61952-1 - Insulators for overhead lines - Composite line post insulators for AC systems with a nominal voltage greater than 1000 V - Part 1: definitions, end fittings and designations (IEC 61952-1:2019)
- SS-EN-50151 - Railway applications - Fixed installations - Electric traction - Special requirements for composite insulators
- SS-EN-61952 - Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria
- SS-ISO-7931 - Insulation caps and bushes for resistance weldingequipment
- UNE-CLC-62662 - Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
- UNE-EN-62231-1 - Composite station post insulators for substations with ac voltages greater than 1 000 V UP TO 245 kV - Part 1: Dimensional, mechanical and electrical characteristics