Document Center is acquired by Nimonik

Document Center List of Standards on Cables

ICS Code 29.060.20

Return to ICS Index.

Up to Level 2:

• 29.060 (Electrical wires and cables)

The following documents are a part of this series:

ASTM:

• ASTM-B172 - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
• ASTM-B174 - Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
• ASTM-B226 - Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
• ASTM-B228 - Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
• ASTM-B229 - Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
• ASTM-B232 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
• ASTM-B401 - Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
• ASTM-B784 - Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
• ASTM-B785 - Standard Specification for Compact Round Modified Concentric-Lay-Stranded Copper Conductors For Use in Insulated Electrical Cables (Withdrawn 1998)
• ASTM-B786 - Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
• ASTM-B787 - Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
• ASTM-B8 - Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
• ASTM-B801 - Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
• ASTM-B802 - Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
• ASTM-B803 - Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
• ASTM-B961 - Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
• ASTM-B971 - Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
• ASTM-B972 - Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
• ASTM-B973 - Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
• ASTM-D232 - Method of Test for Estimating Hard Scoured Wool in Wool in the Grease (Mill Scale Operations) (Withdrawn 1942) No Replacement
• ASTM-D574 - Specification for Ozone-Resisting Insulation for Wire and Cable (Withdrawn 1983)
• ASTM-E2181 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable

BSI:

• BS-2562-1 - Cable sealing boxes for oil immersed transformers. Boxes for voltages up to and including 11 kV
• BS-2G-233 - Specification for electric cables for general airframe or equipment interconnect use (135C), extruded insulation
• BS-4553 - Specification for 600/1000 V PVC-insulated single-phase split concentric cables with copper conductors for electricity supply
• BS-4553-1 - Specification for 600/1000 V single-phase split concentric electric cables
• BS-4553-2 - Specification for 600/1000 V single-phase split concentric electric cables
• BS-4553-3 - Specification for 600/1000 V single-phase split concentric electric cables
• BS-4727-2-GROUP-08 - Electric Cables, Glossary of Electrotechnical, Power, Telecommunication, Electronics,
• BS-5099 - Electric cables. Voltage levels for spark testing
• BS-5308-1 - Instrumentation Cables, Specification for Polyethylene Insulated Cables
• BS-5308-2 - Part 2: Specification for Pvc Insulated Cables, Instrumentation Cables
• BS-5372 - Specification for Dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors
• BS-5467 - Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification
• BS-6004 - Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting
• BS-6007 - Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
• BS-6081 - Specification for terminations for mineral-insulated cables
• BS-6141 - Specification for insulated cables and flexible cords for use in high temperature zones
• BS-6195 - Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
• BS-6207-2 - Mineral insulated cables with a rated voltage not exceeding 750 V. Terminations
• BS-6207-3 - Mineral insulated cables with a rated voltage not exceeding 750 V
• BS-6231 - Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
• BS-6346 - Electric Cables, Pvc Insulated, Armoured Cables for Voltagesof 600/1000 V & 1900/3300
• BS-6351-1 - Part 1: Specification for Electric Surface Heating Devices,Electric Surface Heating
• BS-6360 - Specification for Conductors in Insulated Cables & Cords
• BS-6387 - Test method for resistance to fire of cables required to maintain circuit integrity under fire conditions
• BS-6425-1 - Test on gases evolved during the combustion of materials from cables. Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
• BS-6435 - Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors
• BS-6480 - Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
• BS-6480-1 - Specification for impregnated paper-insulated cables for electricity supply.
• BS-6485 - PVC-covered conductors for overhead power lines
• BS-6500 - Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
• BS-6513-6 - Wideband Cabled Distribution Systems, Specification for Safety Requirements
• BS-6622 - Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
• BS-6708 - Flexible cables for use at mines and quarries
• BS-6724 - Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
• BS-6883 - Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
• BS-7211 - Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire
• BS-7540 - CENELEC Hd 516 S1Guide To Use of Cables With a Rated Voltagenot Exceeding 450/750 Vgiv
• BS-7540-1 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. General guidance
• BS-7540-2 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22
• BS-7540-3 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22
• BS-7622-2 - Test Procedure and Requirements
• BS-7629 - Specification for thermosetting insulated cables with limited circuit integrity when affected by fire
• BS-7629-1 - Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire
• BS-7629-1-TC - Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire
• BS-7629-2 - Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables
• BS-7769-1.1 - Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General
• BS-7769-2-2.1 - Thermal Resistance - Calculation of Thermal Resistance
• BS-7769-3.1 - Electric cables. Calculation of the current rating. Sections on operating conditions. Reference operating conditions and selection of cable type
• BS-7835 - Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods
• BS-7846 - Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
• BS-7870-1 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-2 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC and XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
• BS-7870-3.10 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV
• BS-7870-3.11 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.12 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.2 - Lv & Mv Polymeric Insulated Cables for Use by Distribution &Generation Utilities, Spec
• BS-7870-3.20 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV
• BS-7870-3.21 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.22 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.4 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE and HEPR insulated combined neutral and earth aluminium or copper wire concentric cables with solid aluminium conductors
• BS-7870-3.40 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.40-TC - Tracked Changes. LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.50 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-3.50-TC - Tracked Changes. LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-4.10 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-4.11 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-4.12 - Single Cor 11 Kv Copper Foil Sheath Cables
• BS-7870-4.13 - Single Core 33 Kv Copper Wire/Foil Sheath Cables
• BS-7870-4.20 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-5 - LV and MV polymeric insulated cables for use by distribution and generation utilities
• BS-7870-6.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. PVC insulated and PVC sheathed cables
• BS-7870-6.2 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
• BS-7870-6.3 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
• BS-7870-7.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring
• BS-7870-7.2 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring
• BS-7870-8.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
• BS-7870-8.2 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
• BS-7870-8.3 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
• BS-7870-8.4 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
• BS-7870-8.5 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
• BS-7870-8.6 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
• BS-7888-1 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). General
• BS-7888-2 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Methods of test
• BS-7888-4.1 - Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
• BS-7888-4.2 - Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
• BS-7889 - Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations
• BS-7894 - MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV
• BS-7912 - Power cables with XLPE insulation and metal sheath, and their accessories, for rated voltages from 66 kV (U_m = 72.5 kV) to 132 kV (U_m = 145 kV)
• BS-7917 - Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
• BS-7919 - Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
• BS-7933-1 - Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for resinous compounds
• BS-7933-2 - Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for heat shrinkable components for low voltage applications
• BS-7933-3 - Electric cables. Accessories. Material characterisation. Fingerprinting for heat shrinkable components for medium voltage applications from 3,6/6 (7,2) kV up to 20,8/36 (42) kV
• BS-7933-4 - Electric cables. Accessories. Material characterisation. Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
• BS-7970 - Electric cables. Metal foil and longitudinally welded aluminium sheath constructions of power cables having XLPE insulation for rated voltages from 66 kV (U_m = 72.5 kV) to 132 kV (U_m = 145 kV)
• BS-801 - Specification for composition of lead and lead alloy sheaths of electric cables
• BS-8434-1 - Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray
• BS-8434-2 - Methods of test for assessment of the fire integrity of electric cables
• BS-8436 - Electric cables. Specification for 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
• BS-8491 - Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
• BS-8512 - Electric cables. Code of practice for the storage, handling, installation and disposal of cables on wooden drums
• BS-8573 - Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire
• BS-8592 - Electric cables. Thermosetting insulated, non-armoured, fire-resistant, single core non-sheathed cables of rated voltage 450/750 V, having low emission of smoke and corrosive gases when affected by fire. Specification
• BS-8602 - Method for assessment of fire integrity of cast resin busbar trunking systems for the safety critical power distribution to life safety and fire fighting systems
• BS-EN-10257-1 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables
• BS-EN-10257-2 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables
• BS-EN-13501-6 - Fire classification of construction products and building elements
• BS-EN-1366-11 - Fire resistance tests for service installations
• BS-EN-50143 - Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10000 V
• BS-EN-50167 - Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication
• BS-EN-50168 - Sectional Specification for Work Area Wiring Cables With a Common Overall Screen for U
• BS-EN-50200 - Method of test for resistance to fire of unprotected small cables for use in emergency circuits
• BS-EN-50214 - Flat flexible cables
• BS-EN-50214-TC - Tracked Changes. Flat flexible cables
• BS-EN-50264-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
• BS-EN-50264-2 - Railway Applications, Railway Rolling Stock Cables Having Special Fire Performance, St
• BS-EN-50264-2-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
• BS-EN-50264-2-2 - Railway applications. Railway rolling stock power and control cables having special fire performance
• BS-EN-50264-3 - Railway Applications, Railway Rolling Stock Cables Having Special Fire Performance, St
• BS-EN-50264-3-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
• BS-EN-50264-3-2 - Railway applications. Railway rolling stock power and control cables having special fire performance
• BS-EN-50265-1 - Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable
• BS-EN-50265-2-1 - Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures
• BS-EN-50265-2-2 - Part 2: Procedures, Section 2: Diffusion Flame
• BS-EN-50266-1 - Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables
• BS-EN-50266-2-1 - Procedures - Category a F/R
• BS-EN-50266-2-2 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
• BS-EN-50266-2-3 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
• BS-EN-50266-2-4 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
• BS-EN-50266-2-5 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
• BS-EN-50267-1 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables
• BS-EN-50267-2-1 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures
• BS-EN-50267-2-2 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures
• BS-EN-50267-2-3 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures
• BS-EN-50268-1 - Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions
• BS-EN-50268-2 - Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions
• BS-EN-50289-3-1 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-11 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-12 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-16 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-4 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-5 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-6 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-7 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-3-8 - Communication cables. Specifications for test methods
• BS-EN-50289-3-9 - Communication cables. Specifications for test methods. Mechanical test methods
• BS-EN-50289-4-1 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50289-4-2 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50289-4-9 - Communication cables. Specifications for test methods. Environmental test methods
• BS-EN-50290-1-1 - Communication cables.
• BS-EN-50290-2-20-TC - Tracked Changes. Communication cables
• BS-EN-50290-2-21 - Communication cables
• BS-EN-50290-4-1 - Communication cables
• BS-EN-50290-4-1-TC - Tracked Changes. Communication cables
• BS-EN-50290-4-2 - Communication cables
• BS-EN-50305 - Railway applications. Railway rolling stock cables having special fire performance. Test methods
• BS-EN-50306-1 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
• BS-EN-50306-2 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
• BS-EN-50306-3 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
• BS-EN-50306-4 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
• BS-EN-50334 - Marking by inscription for the identification of cores of electric cables
• BS-EN-50341-2-7-TC - Tracked Changes. Overhead electrical lines exceeding AC 1 kV
• BS-EN-50355 - Railway applications. Railway rolling stock cables having special fire performance. Guide to use
• BS-EN-50356 - Method for spark testing of cables
• BS-EN-50382-1 - Railway applications. Railway rolling stock high temperature power cables having special fire performance
• BS-EN-50382-2 - Railway applications. Railway rolling stock high temperature power cables having special fire performance
• BS-EN-50395 - Electrical test methods for low voltage energy cables
• BS-EN-50396 - Non electrical test methods for low voltage energy cables
• BS-EN-50399 - Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
• BS-EN-50525-1 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-11 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U)
• BS-EN-50525-2-12 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-21 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-22 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-31 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-41 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-42 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-51 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-71 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-72 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-81 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-82 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-2-83 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-3-11 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-3-21 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-3-31 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50525-3-41 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• BS-EN-50565-1 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U₀/U)
• BS-EN-50565-2 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U₀/U)
• BS-EN-50575 - Power, control and communication cables. Cables for general applications in construction works subject to reaction to fire requirements
• BS-EN-50576 - Electric cables. Extended application of test results for reaction to fire
• BS-EN-50576-TC - Tracked Changes. Electric cables. Extended application of test results for reaction to fire
• BS-EN-50577 - Electric cables. Fire resistance test for unprotected electric cables (P classification)
• BS-EN-50618 - Electric cables for photovoltaic systems (BT(DE/NOT)258)
• BS-EN-50620 - Electric cables. Charging cables for electric vehicles
• BS-EN-50620-TC - Electric cables. Charging cables for electric vehicles
• BS-EN-50642 - Cable management systems. Test method for content of halogens
• BS-EN-50655-1 - Electric cables. Accessories. Material characterization
• BS-EN-50655-1-TC - Tracked Changes. Electric cables. Accessories. Material characterization.Fingerprinting for resinous compounds.
• BS-EN-50655-2 - Electric cables. Accessories. Material characterization
• BS-EN-50655-3 - Electric cables. Accessories. Material characterization
• BS-EN-60228 - Conductors of insulated cables
• BS-EN-60229 - Electric cables. Tests on extruded oversheaths with a special protective function
• BS-EN-60230 - Impulse tests on cables and their accessories
• BS-EN-60332-1-1 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-1-2 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-1-3 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-2-1 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-2-2 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-3-10 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-3-21 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-3-22 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-3-23 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-3-24 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60332-3-25 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-60702-1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
• BS-EN-60702-2 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
• BS-EN-60702-3 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
• BS-EN-60708 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
• BS-EN-60719 - Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
• BS-EN-60754-1 - Test on gases evolved during combustion of materials from cables
• BS-EN-60754-2 - Test on gases evolved during combustion of materials from cables
• BS-EN-60811-100 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-201 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-202 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-203 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-301 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-302 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-401 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-402 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-403 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-404 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-405 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-406 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-407 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-408 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-409 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-4-1 - Insulating and sheathing materials of electric and optical cables. Common test methods
• BS-EN-60811-410 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-411 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-412 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-4-2 - Insulating and sheathing materials of electric and optical cables. Common test methods
• BS-EN-60811-501 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-502 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-503 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-504 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-505 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-506 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-507 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-508 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-509 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-510 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-511 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-512 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-513 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-601 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-602 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-603 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-604 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-605 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-606 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60811-607 - Electric and optical fibre cables. Test methods for non-metallic materials
• BS-EN-60885-3 - Electrical test methods for electric cables
• BS-EN-60885-3-TC - Tracked Changes. Electrical test methods for electric cables
• BS-EN-61034-1 - Measurement of smoke density of cables burning under defined conditions
• BS-EN-61034-2 - Measurement of smoke density of cables burning under defined conditions
• BS-EN-61138 - Cables for portable earthing and short-circuiting equipment
• BS-EN-61394 - Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
• BS-EN-61442 - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
• BS-EN-62230 - Electric cables. Spark-test method
• BS-EN-62491 - Industrial systems, installations and equipment and industrial products. Labelling of cables and cores
• BS-EN-63075 - Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV. Test methods and requirements
• BS-EN-IEC-60230 - Impulse tests on cables and their accessories
• BS-EN-IEC-60230-TC - Tracked Changes. Impulse tests on cables and their accessories
• BS-EN-IEC-60331-1 - Tests for electric cables under fire conditions. Circuit integrity
• BS-EN-IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-10-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-21 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-21-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-22 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-22-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-23-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60332-3-24-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
• BS-EN-IEC-60754-3 - Test on gases evolved during combustion of materials from cables
• BS-EN-IEC-60794-1-310 - Optical fibre cables
• BS-EN-IEC-60799 - Electrical accessories. Cord sets and interconnection cord sets
• BS-EN-IEC-60799-TC - Tracked Changes. Electrical accessories. Cord sets and interconnection cord sets
• BS-EN-IEC-61238-1-1 - Compression and mechanical connectors for power cables
• BS-EN-IEC-61238-1-2 - Compression and mechanical connectors for power cables
• BS-EN-IEC-61238-1-3 - Compression and mechanical connectors for power cables
• BS-EN-IEC-61340-4-3-TC - Tracked Changes. Electrostatics
• BS-EN-IEC-63355 - Cable management systems. Test method for content of halogens
• BS-EN-IEC-63355-TC - Tracked Changes. Cable management systems. Test method for content of halogens
• BS-HD-629.1-S3 - Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
• BS-HD-629.2-S3 - Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
• BS-IEC-60183 - Guidance for the selection of high-voltage A.C. cable systems
• BS-IEC-60230 - Impulse tests on cables and their accessories
• BS-IEC-60287-1-1 - Electric cables. Calculation of the current rating
• BS-IEC-60287-1-1-TC - Tracked Changes. Electric cables. Calculation of the current rating
• BS-IEC-60287-1-3-TC - Tracked Changes. Electric cables. Calculation of the current rating
• BS-IEC-60287-2-1 - Electric cables. Calculation of the current rating
• BS-IEC-60287-2-1-TC - Tracked Changes. Electric cables. Calculation of the current rating
• BS-IEC-60287-2-3 - Electric cables. Calculation of the current rating
• BS-IEC-60287-3-1 - Electric cables. Calculation of the current rating
• BS-IEC-60287-3-2 - Electric cables. Calculation of the current rating
• BS-IEC-60287-3-3 - Electric cables. Calculation of the current rating
• BS-IEC-60853-3 - Calculation of the cyclic and emergency current rating of cables
• BS-IEC-62125 - Environmental considerations specific to insulated electrical power and control cables
• BS-IEC-62895 - High voltage direct current (HVDC) power transmission. Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications. Test methods and requirements
• BS-IEC-63026 - Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (U_m = 7,2 kV) up to 60 kV (U_m = 72,5 kV). Test methods and requirements
• DD-CLC-61482-1 - Live Working, Flame-Resistant Materials for Clothing for Thermal Protection of Workers
• DD-IEC/PAS-62338 - Screened balanced cables. Coupling attenuation measurement, triaxial method
• PAS-256 - Buried assets. Capturing, recording, maintaining and sharing of location information and data. Code of practice
• PAS-5308-1 - Control and instrumentation cables
• PAS-5308-2 - Control and instrumentation cables
• PD-2379 - Register of colours of manufacturers' identification threads for electric cables and cords. Tenth Edition
• PD-CLC-50424 - Electric Cables, List of Residual Recognized National Types
• PD-CLC-50576 - Electric cables - Extended application of test results for reaction to fire
• PD-CLC-50658 - Cable management systems (CMS) providing support for cables with intrinsic fire resistance
• PD-CLC-62125 - Environmental statement specific to TC 20. Electric cables

IEC:

• IEC-141-1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV
• IEC-141-1-1 - Amendment No. 1
• IEC-141-2 - Tests on oil-filled and gas-pressure cables and their accessories. Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
• IEC-141-2-1 - Amendment No. 1
• IEC-141-3 - Tests on oil-filled and gas-pressure cables and their accessories. Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV
• IEC-141-3-1 - Amendment No. 1
• IEC-141-4 - Tests on oil-filled and gas-pressure cables and their accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV
• IEC-141-4-1 - Amendment No. 1
• IEC-183 - Guide to the selection of high-voltage cables
• IEC-183-1 - Amendment No. 1
• IEC-227-4 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
• IEC-230 - Impulse tests on cables and their accessories
• IEC-245-3 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
• IEC-245-5 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
• IEC-245-6 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
• IEC-245-7 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
• IEC-287-1-2 - Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation
• IEC-287-2-2 - Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
• IEC-304 - Standard colours for insulation for low-frequency cables and wires
• IEC-55-2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements
• IEC-55-2-1 - Amendment No. 1
• IEC-60050-461 - International Electrotechnical Vocabulary - Part 461: Electric cables
• IEC-60055-1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
• IEC-60055-1-1 - Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
• IEC-60055-2-2 - Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
• IEC-60092-350 - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
• IEC-60092-350-RL - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
• IEC-60092-351 - Part 351: Insulating Materials for Shipboard & Offshore Units, Power, Control, Instrumenta
• IEC-60092-352 - Electrical installations in ships - Part 352: Choice and installation of electrical cables
• IEC-60092-353 - Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
• IEC-60092-353-RL - Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
• IEC-60092-354 - Electrical installations in ships . Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
• IEC-60092-354-RL - Electrical installations in ships – Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
• IEC-60092-370 - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
• IEC-60092-370-RL - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
• IEC-60092-376 - Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
• IEC-60092-379 - Electrical installations in ships - Part 379: Symmetrical category cables with transmission characteristics up to 1 000 MHz
• IEC-60141-1-2 - Amendment 2
• IEC-60183 - Guidance for the selection of high-voltage A.C. cable systems
• IEC-60189-1 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
• IEC-60189-2 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations
• IEC-60189-3 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
• IEC-60227-1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
• IEC-60227-2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC-60227-2-1 - Amendment 1
• IEC-60227-3 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
• IEC-60227-3-1 - Amendment No. 1
• IEC-60227-3-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
• IEC-60227-4 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
• IEC-60227-4-1 - Amendment No. 1
• IEC-60227-5 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
• IEC-60227-5-2 - Amendment 2: Polyvinyl Chloride Insulated Cables of Rated Voltages Up To & Including 450/7
• IEC-60227-5-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
• IEC-60227-6 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
• IEC-60227-7 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V
• IEC-60227-7-1 - Amendment 1
• IEC-60227-7-AM2 - Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
• IEC-60227-7-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V
• IEC-60228 - Conductors of insulated cables
• IEC-60228 CMV - Conductors of insulated cables
• IEC-60229 - Electric cables - Tests on extruded oversheaths with a special protective function
• IEC-60230 - Impulse tests on cables and their accessories
• IEC-60230-AM1 - Amendment 1 - Impulse tests on cables and their accessories
• IEC-60245-1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
• IEC-60245-1-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
• IEC-60245-2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC-60245-2-1 - Amendment No. 1
• IEC-60245-2-2 - Amendment No. 2
• IEC-60245-3-1 - Amendment No. 1
• IEC-60245-3-AM2 - Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
• IEC-60245-4 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
• IEC-60245-4-2 - Amendment 2: Rubber Insulated Cables - Rated Voltages Up To& Including 450/750 V - Part
• IEC-60245-5-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
• IEC-60245-6-1 - Amendment No. 1
• IEC-60245-6-2 - Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
• IEC-60245-7-1 - Amendment No. 1
• IEC-60245-8 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
• IEC-60245-8-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
• IEC-60245-8-AM2 - Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
• IEC-60287-1-1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
• IEC-60287-1-1-AM1 - Amendment 1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
• IEC-60287-1-1 CMV - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
• IEC-60287-1-2 - Electric cables - Calculation of the current rating - Part 1-2: Current rating equations (100 % load factor) and calculations of losses - Sheath eddy current loss factors for two circuits in flat formation
• IEC-60287-1-3 - Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
• IEC-60287-1-3 CMV - Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
• IEC-60287-2-1 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
• IEC-60287-2-1-1 - Amendment 1
• IEC-60287-2-1-2 - Amendment 2 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
• IEC-60287-2-1 CMV - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
• IEC-60287-2-1-RL - Assessment of power quality - Characteristics of electricity supplied by public networks
• IEC-60287-2-3 - Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels
• IEC-60287-2-3-RL - Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels
• IEC-60287-3-1 - Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions
• IEC-60287-3-1-1 - Amendment 1
• IEC-60287-3-1-RL - Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions
• IEC-60287-3-2 - Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size
• IEC-60287-3-3 - Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources
• IEC-60287 SERIES - Electric cables - ALL PARTS
• IEC-60331-1 - Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
• IEC-60331-11 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
• IEC-60331-11/A1 - Amendment 1 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
• IEC-60331-1-RL - Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830¦C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
• IEC-60331-2 - Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
• IEC-60331-21 - Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
• IEC-60331-23 - Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
• IEC-60331-2-RL - Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830¦C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
• IEC-60331-3 - Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
• IEC-60331-3-RL - Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830¦C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
• IEC-60332-1-1-AM1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• IEC-60332-1-2 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
• IEC-60332-1-2-AM1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
• IEC-60332-1-3-AM1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
• IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
• IEC-60332-3-10-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
• IEC-60332-3-10-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
• IEC-60332-3-21 - Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
• IEC-60332-3-21-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
• IEC-60332-3-22 - Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
• IEC-60332-3-22-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
• IEC-60332-3-22-RL - Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
• IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
• IEC-60332-3-23-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
• IEC-60332-3-23-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
• IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
• IEC-60332-3-24-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
• IEC-60332-3-24-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
• IEC-60332-3-25 - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
• IEC-60332-3-25-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
• IEC-60332-3-25-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
• IEC-60502-1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
• IEC-60502-1-1 - Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
• IEC-60502-1-RL - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
• IEC-60502-2 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
• IEC-60502-2-AM1 - Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
• IEC-60502-2-RL - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
• IEC-60502-4 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
• IEC-60502 SERIES - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) - ALL PARTS
• IEC-60502-SERIES - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) - ALL PARTS
• IEC-60649 - Calculation of maximum external diameter of cables for indoor installations
• IEC-60702-1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
• IEC-60702-1-AM1 - Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
• IEC-60702-2 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
• IEC-60702-2-AM1 - Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
• IEC-60702-3 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guide for use
• IEC-60708 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
• IEC-60724 - Short-circuit temperature limits of electric cables with rated voltages of 1 kV (U_m = 1,2 kV) and 3 kV (U_m = 3,6 kV)
• IEC-60724-1 - Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
• IEC-60754-1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
• IEC-60754-2 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
• IEC-60754-3 - Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography
• IEC-60799 - Electrical accessories - Cord sets and interconnection cord sets
• IEC-60799-RL - Electrical accessories - Cord sets and interconnection cord sets
• IEC-60800 - Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation
• IEC-60800-RL - Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation
• IEC-60811-100 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
• IEC-60811-1-3 - Part 1-3: General Application - Methods for Determining Thedensity - Water Absorption Te
• IEC-60811-201 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• IEC-60811-201-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• IEC-60811-201-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• IEC-60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
• IEC-60811-202-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
• IEC-60811-202-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
• IEC-60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
• IEC-60811-2-1 - Part 2-1: Methods Specific To Elastomeric Compounds - Ozoneresistance, Hot Set & Mineral
• IEC-60811-301 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds
• IEC-60811-302 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
• IEC-60811-401 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
• IEC-60811-401-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
• IEC-60811-402 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
• IEC-60811-403 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
• IEC-60811-404 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
• IEC-60811-405 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
• IEC-60811-406 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds
• IEC-60811-407 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
• IEC-60811-408 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
• IEC-60811-409 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
• IEC-60811-410 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
• IEC-60811-411 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
• IEC-60811-412 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
• IEC-60811-501 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• IEC-60811-501-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• IEC-60811-501-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• IEC-60811-502 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
• IEC-60811-503 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
• IEC-60811-503-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
• IEC-60811-504 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
• IEC-60811-505 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
• IEC-60811-506 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
• IEC-60811-507 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
• IEC-60811-508 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• IEC-60811-508-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• IEC-60811-508-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• IEC-60811-509 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• IEC-60811-509-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• IEC-60811-510 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
• IEC-60811-511 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
• IEC-60811-511-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
• IEC-60811-512 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
• IEC-60811-513 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
• IEC-60811-601 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
• IEC-60811-602 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
• IEC-60811-603 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
• IEC-60811-604 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
• IEC-60811-605 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
• IEC-60811-606 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
• IEC-60811-607 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
• IEC-60840 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
• IEC-60840-AM1 - Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
• IEC-60840-RL - Power Cables With Extruded Insulation & Their Accessories for Rated Voltages Above 30
• IEC-60853-1-2 - Amendment 2 - Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30 (36) kV
• IEC-60853-2-1 - Amendment 1 - Calculation of the cyclic and emergency current rating of cables - Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
• IEC-60853-3 - Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil
• IEC-60885-3 - Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
• IEC-60885-3-RL - Assessment of power quality - Characteristics of electricity supplied by public networks
• IEC-60949-1 - Amendment 1 - Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
• IEC-60986 - Short-circuit temperature limits of electric cables with rated voltages from 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)
• IEC-60986-1 - Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
• IEC-61034-1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
• IEC-61034-1-AM1 - Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
• IEC-61034-2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
• IEC-61034-2-AM1 - Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
• IEC-61138 - Cables for portable earthing and short-circuiting equipment
• IEC-61238-1 - Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
• IEC-61238-1-1 - Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
• IEC-61238-1-2 - Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
• IEC-61238-1-3 - Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) tested on non-insulated conductors
• IEC-61394 - Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
• IEC-61442 - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
• IEC-61442-RL - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
• IEC-61443 - Short-circuit temperature limits of electric cables with rated voltages above 30 kV (U_m = 36 kV)
• IEC-61443-1 - Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
• IEC-61901 - Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (U_m = 36 kV) up to and including 500 kV (U_m = 550 kV)
• IEC-62067 - Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
• IEC-62067-1 - Amendment 1: Power Cables With Extruded Insulation & Their Accessories for Rated Volta
• IEC-62067-RL - Power Cables With Extruded Insulation & Their Accessories for Rated Voltages Above 150
• IEC-62095 - Electric cables - Calculations for current ratings - Finite element method
• IEC-62100 - Cables for aeronautical ground lighting primary circuits
• IEC-62125 - Environmental considerations specific to insulated electrical power and control cables
• IEC-62230 - Electric cables - Spark-test method
• IEC-62230-AM1 - Amendment 1 - Electric cables - Spark-test method
• IEC-62440 - Electric cables with a rated voltage not exceeding 450/750 V - Guide to use
• IEC-62602 - Conductors of insulated cables - Data for AWG and KCMIL sizes
• IEC-62821-1 - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: General requirements
• IEC-62821-2 - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC-62821-3 - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords)
• IEC-62893-1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
• IEC-62893-1-AM1 - Amendment 1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
• IEC-62893-2 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods
• IEC-62893-3 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V
• IEC-62893-4-1 - Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system
• IEC-62895 - High voltage direct current (HVDC) power transmission - Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications - Test methods and requirements
• IEC-62930 - Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC
• IEC-63010-1 - Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 1: General requirements and cables
• IEC-63010-2 - Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 2: Test methods
• IEC-63026 - Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (U_m = 7,2 kV) up to 60 kV (U_m = 72,5 kV) - Test methods and requirements
• IEC-63075 - Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV - Test methods and requirements
• IEC-63294 - Test methods for electric cables with rated voltages up to and including 450/750 V
• IEC-719 - Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
• IEC-853-1 - Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV
• IEC-853-1-1 - Amendment No. 1
• IEC-853-2 - Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
• IEC-885-2 - Electrical test methods for electric cables. Part 2: Partial discharge tests
• IEC-885-3 - Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
• IEC-918 - PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination
• IEC-918-1 - Amendment No. 1

ISO:

• IEC-60227-1-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

Other SDOs:

• BS-EN-IEC-61340-4-3 - Electrostatics
• BS-IEC-60287-2-3-TC - Tracked Changes. Electric cables. Calculation of the current rating
• EN-13501-6 - Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables
• EN-1366-11 - Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
• EN-50143 - Cables for Signs & Luminous-Discharge-Tube Installations Operating From a No-Load Rate
• EN-50214 - Flat Polyvinyl Chloride Sheathed Flexible Cables
• EN-50264-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
• EN-50264-2-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
• EN-50264-2-2 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
• EN-50264-3-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
• EN-50264-3-2 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
• EN-50289-3-1 - Communication Cables, Specifications for Test Methods, Mechanical Test Methods, Genera
• EN-50355 - Railway applications - Railway rolling stock cables having special fire performance - Guide to use
• EN-50382-1 - Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1: General requirements
• EN-50382-2 - Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Single core silicone rubber insulated cables for 120 Degrees C or 150 Degrees C
• EN-50396 - Non electrical test methods for low voltage energy cables
• EN-50399 - Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
• EN-50525-1 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
• EN-50525-2-11 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
• EN-50525-2-12 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads
• EN-50525-2-21 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation
• EN-50525-2-22 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation
• EN-50525-2-31 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation
• EN-50525-2-41 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation
• EN-50525-2-42 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation
• EN-50525-2-51 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
• EN-50525-2-71 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation
• EN-50525-2-72 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation
• EN-50525-2-81 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding
• EN-50525-2-82 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains
• EN-50525-2-83 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation
• EN-50525-3-11 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
• EN-50525-3-21 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
• EN-50525-3-31 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
• EN-50525-3-41 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
• EN-50565-1 - Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 1: General guidance
• EN-50565-2 - Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types
• EN-50575 - Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
• EN-50577 - Electric cables - Fire resistance test for unprotected electric cables (P classification)
• EN-50620 - Electric cables - Charging cables for electric vehicles
• EN-60228 - Conductors of Insulated Cables
• EN-60229 - Electric Cables, Tests on Extruded Oversheaths With a Special Protective Function
• EN-60332-1-1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• EN-60332-1-2 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
• EN-60332-1-3 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
• EN-60332-2-1 - Tests on Electric & Optical Fibre Cables Under Fire Conditions, Test for Vertical Flam
• EN-60332-3-10 - Part 3-10: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
• EN-60332-3-21 - Part 3-21: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
• EN-60332-3-22 - Part 3-22: Test for Vertical Flame Spread of Vertically-Mounns, Test for Vertical Flam
• EN-60332-3-23 - Part 3-23: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
• EN-60332-3-24 - Part 3-24: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
• EN-60332-3-25 - Part 3-25: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
• EN-60702-1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
• EN-60702-2 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
• EN-60702-3 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use
• EN-60754-1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
• EN-60754-2 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
• EN-60811-100 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
• EN-60811-201 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• EN-60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
• EN-60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
• EN-60811-301 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 Degrees C of filling compounds
• EN-60811-302 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 Degrees C and 100 Degrees C of filling compounds
• EN-60811-401 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
• EN-60811-402 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
• EN-60811-403 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
• EN-60811-404 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
• EN-60811-405 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
• EN-60811-406 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
• EN-60811-407 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
• EN-60811-408 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
• EN-60811-409 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
• EN-60811-410 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
• EN-60811-411 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
• EN-60811-412 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
• EN-60811-501 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• EN-60811-502 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
• EN-60811-503 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
• EN-60811-504 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
• EN-60811-505 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
• EN-60811-506 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
• EN-60811-507 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
• EN-60811-508 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• EN-60811-509 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• EN-60811-510 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
• EN-60811-511 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds
• EN-60811-512 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
• EN-60811-513 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
• EN-60811-601 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
• EN-60811-602 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
• EN-60811-603 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
• EN-60811-604 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
• EN-60811-605 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
• EN-60811-606 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
• EN-60811-607 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
• EN-60885-3 - Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
• EN-61034-1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
• EN-61034-2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
• EN-61138 - Cables for Portable Earthing & Short-Circuiting Equipment
• EN-61394 - Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
• EN-62230 - Electric cables - Spark-test method
• EN-62491 - Industrial Systems, Installations & Equipment & Industrial Products, Labelling of Cabl
• EN-IEC-60230 - Impulse tests on cables and their accessories
• EN-IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
• EN-IEC-60332-3-21 - Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables °Ctegory A F/R
• EN-IEC-60332-3-22 - Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
• EN-IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
• EN-IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
• EN-IEC-60332-3-25 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
• JIS-C-3005 - Test methods for rubber or plastic insulated wires and cables
• JIS-C-3316 - Polyvinyl chloride insulated wires for electrical apparatus
• JIS-C-3342 - 600 V Polyvinyl chloride insulated and sheathed cables
• JIS-C-3401 - Control cables
• JIS-C-3407 - High voltage cables for X-ray apparatus
• JIS-C-3408 - Travelling cables for elevators
• JIS-C-3410 - Cables and flexible cords for electrical equipment of ships
• JIS-C-3612 - 600V Flame retardant polyethylene insulated wires
• JIS-C-3612-AM1 - 600 V Flame retardant polyethylene insulated wires (Amendment 1)
• JIS-C-3662-7-AM1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 7: Flexible cables screened and unscreened with two or more conductors (Amendment 1)
• JIS-C-3663-8-AM1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility (Amendment 1)
• SS-EN-13160-3 - Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
• SS-EN-13501-6 - Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables
• SS-EN-1366-11 - Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
• SS-EN-60228 - Conductors of insulated cables
• UNE-EN-50200 - Method of test for resistance to fire of unprotected small cables for use in emergency circuits