Document Center List of Standards on Hydraulic Energy Engineering Including Hydraulic Turbines
ICS Code 27.140
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
BSI:
- BS-EN-60193 - Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests
- BS-EN-60308 - Hydraulic turbines. Testing of control systems
- BS-EN-60609-1 - Hydraulic turbines, storage pumps and pump-turbines. Cavitation pitting evaluation
- BS-EN-60609-2 - Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines
- BS-EN-61362 - Guide to specification of hydraulic turbine governing systems
- BS-EN-62097 - Hydraulic machines, radial and axial. Performance conversion method from model to prototype
- BS-EN-62256 - Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement
- BS-EN-62256-TC - Tracked Changes. Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement
- BS-EN-62270 - Hydroelectric power plant automation. Guide for computer-based control
- BS-EN-62364 - Hydraulic machines. Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines
- BS-EN-IEC-60193 - Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests
- BS-EN-IEC-62097 - Hydraulic machines, radial and axial. Methodology for performance transposition from model to prototype
- BS-EN-IEC-63132-1 - Guidance for installation procedures and tolerances of hydroelectric machines
- BS-EN-IEC-63132-2 - Guidance for installation procedures and tolerances of hydroelectric machines
- BS-EN-IEC-63132-3 - Guidance for installation procedures and tolerances of hydroelectric machines
- BS-EN-IEC-63132-4 - Guidance for installation procedures and tolerances of hydroelectric machines
- BS-EN-IEC-63461 - Pelton hydraulic turbines. Model acceptance tests
- BS-IEC-60308 - Hydraulic turbines. Testing of control systems
- BS-IEC/IEEE-63198-2775 - Technical guidelines for smart hydroelectric power plant
- DD-IEC-62600-1 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-1 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-10 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-100 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-101 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-102 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-103 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-10-TC - Tracked Changes. Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-2 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-20 - Marine energy. Wave, tidal, and other water current converters
- PD-IEC-62600-200 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-201 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-202 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-3 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-30 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-300 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-301 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-4 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62600-40 - Marine energy. Wave, tidal and other water current converters
- PD-IEC-62882 - Hydraulic machines. Francis turbine pressure fluctuation transposition
IEC:
- IEC-41 - Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
- IEC-60050-417 - International Electrotechnical Vocabulary (IEV) - Part 417: Marine energy - Wave, tidal and other water current converters
- IEC-60193 - Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
- IEC-60308 - Hydraulic turbines - Testing of governing systems
- IEC-60609-2 - Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines
- IEC-61362 - Guide to specification of hydraulic turbine governing systems
- IEC-61366-1 - Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 1: General and annexes
- IEC-61366-2 - Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 2: Guidelines for technical specifications for Francis turbines
- IEC-61366-3 - Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines
- IEC-61366-4 - Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines
- IEC-61366-5 - Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 5: Guidelines for technical specifications for tubular turbines
- IEC-61366-6 - Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 6: Guidelines for technical specifications for pump-turbines
- IEC-61366-7 - Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 7: Guidelines for technical specifications for storage pumps
- IEC-62006 - Hydraulic machines - Acceptance tests of small hydroelectric installations
- IEC-62097 - Hydraulic machines, radial and axial . Methodology for performance transposition from model to prototype
- IEC-62256 - Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
- IEC-62256-RL - Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
- IEC-62270 - Guide for computer-based control for hydroelectric power plant automation
- IEC-62301 - Household electrical appliances - Measurement of standby power
- IEC-62364 - Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines
- IEC-62600-1 - Marine energy - Wave, tidal and other water current converters - Part 1: Vocabulary
- IEC-62600-10 - Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECs)
- IEC-62600-100 - Marine energy - Wave, tidal and other water current converters - Part 100: Electricity producing wave energy converters - Power performance assessment
- IEC-62600-101 - Marine energy - Wave, tidal and other water current converters - Part 101: Wave energy resource assessment and characterization
- IEC-62600-102 - Marine energy - Wave, tidal and other water current converters - Part 102: Wave energy converter power performance assessment at a second location using measured assessment data
- IEC-62600-103 - Marine energy - Wave, tidal and other water current converters - Part 103: Guidelines for the early stage development of wave energy converters - Best practices and recommended procedures for the testing of pre-prototype devices
- IEC-62600-103-RL - Marine energy - Wave, tidal and other water current converters - Part 103: Guidelines for the early stage development of wave energy converters - Best practices and recommended procedures for the testing of pre-prototype devices
- IEC-62600-1-AM1 - Amendment 1 - Marine energy - Wave, tidal and other water current converters - Part 1: Terminology
- IEC-62600-2 - Marine energy - Wave, tidal and other water current converters - Part 2: Marine energy systems - Design requirements
- IEC-62600-20 - Marine energy - Wave, tidal, and other water current converters - Part 20: Design and analysis of an Ocean Thermal Energy Conversion (OTEC) plant - General guidance
- IEC-62600-200 - Marine energy - Wave, tidal and other water current converters - Part 200: Electricity producing tidal energy converters - Power performance assessment
- IEC-62600-201 - Marine energy - Wave, tidal and other water current converters - Part 201: Tidal energy resource assessment and characterization
- IEC-62600-202 - Marine energy - Wave, tidal and other water current converters - Part 202: Early stage development of tidal energy converters - Best practices and recommended procedures for the testing of pre-prototype scale devices
- IEC-62600-30 - Marine energy - Wave, tidal and other water current converters - Part 30: Electrical power quality requirements
- IEC-62600-300 - Marine energy - Wave, tidal and other water current converters - Part 300: Electricity producing river energy converters - Power performance assessment
- IEC-62600-301 - Marine energy - Wave, tidal and other water current converters - Part 301: River energy resource assessment
- IEC-62600-4 - Marine energy - Wave, tidal and other water current converters - Part 4: Specification for establishing qualification of new technology
- IEC-62600-40 - Marine energy - Wave, tidal and other water current converters - Part 40: Acoustic characterization of marine energy converters
- IEC-62882 - Hydraulic machines - Francis turbine pressure fluctuation transposition
- IEC-63132-1 - Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects
- IEC-63132-2 - Guidance for installation procedures and tolerances of hydroelectric machines - Part 2: Vertical generators
- IEC-63132-4 - Guidance for installation procedures and tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propeller turbines
- IEC-63132-5 - Guidance for installation procedures and tolerances of hydroelectric machines - Part 5: Bulb turbines and generators
- IEC-63132-6 - Guidance for installation procedures and tolerances of hydroelectric machines - Part 6: Vertical Pelton turbines
- IEC-63461 - Pelton hydraulic turbines - Model acceptance tests
- IEC/IEEE-63198-2775 - Technical guidelines for smart hydroelectric power plant
ISO:
- ISO-10816-5 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants
- ISO-19283 - Condition monitoring and diagnostics of machines - Hydroelectric generating units
- IWA-33-1 - Technical guidelines for the development of small hydropower plants - Part 1: Vocabulary
- IWA-33-2 - Technical guidelines for the development of small hydropower plants - Part 2: Site selection planning
- IWA-33-3 - Technical guidelines for the development of small hydropower plants - Part 3: Design principles and requirements
Other SDOs:
- EN-50564 - Electrical and electronic household and office equipment - Measurement of low power consumption
- EN-60193 - Hydraulic Turbines, Storage Pumps & Pump-Turbines, Model Acceptance Tests
- EN-60609-2 - Cavitation Pitting Evaluation in Hydraulic Turbines, Storage Pumps & Pumps Turbines, E
- EN-61362 - Guide to specification of hydraulic turbine governing systems
- EN-62097 - Hydraulic Machines, Radial & Axial, Performance Conversion Method From Model To Protot
- EN-62256 - Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
- EN-62270 - Hydroelectric Power Plant Automation, Guide for Computer-Based Control
- EN-62364 - Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines
- EN-IEC-60193 - Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC 60193:2019)
- EN-IEC-62097 - Hydraulic machines, radial and axial - Methodology for performance transposition from model to prototype (IEC 62097:2019)
- EN-IEC-62364 - Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in kaplan, francis and pelton turbines (IEC 62364:2019)
- PD-IEC-62600-103-TC - Tracked Changes. Marine energy. Wave, tidal and other water current converters
- SS-ISO-10816-5 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants
- SS-ISO-20816-5 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants (ISO 20816-5:2018, IDT)