Document Center List of Standards on Energy And Heat Transfer Engineering In General
ICS Code 27.010
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-B70 - Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
- ASTM-C108 - Standard Symbols for Heat Transmission (Withdrawn 2023)
BSI:
- BIP-2221 - Implementing and Improving an Energy Management System: How to Meet the Requirements of ISO 50001
- BIP-2230 - Energy Audits. The key to delivering real energy reductions
- BIP-2232 - ISO 50001 A5 Laminated
- BS-7351 - Specification for metal-sheathed heating elements for industrial use
- BS-EN-16001 - Energy management systems. Requirements with guidance for use
- BS-EN-16212 - Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods
- BS-EN-16247-1 - Energy audits
- BS-EN-16247-2 - Energy audits
- BS-EN-16247-3 - Energy audits
- BS-EN-16247-4 - Energy audits
- BS-EN-16247-5 - Energy audits
- BS-EN-16325 - Guarantees of Origin related to energy. Guarantees of Origin for Electricity
- BS-EN-16754 - Artisan Gelato and ice cream machinery. Performance characteristics and energy consumption
- BS-EN-16825 - Refrigerated storage cabinets and counters for professional use. Classification, requirements and test conditions
- BS-EN-50597 - Energy consumption of vending machines
- BS-EN-IEC-62934 - Grid integration of renewable energy generation. Terms and definitions
- BS-EN-ISO-50001 - Energy management systems. Requirements with guidance for use
- BS-EN-ISO-50001 (A5 - Energy management systems. Requirements with guidance for use (A5 Laminated) - Please see BIP-2232
- BS-EN-ISO/IEC13273-1 - Energy efficiency and renewable energy sources. Common international terminology
- BS-EN-ISO/IEC13273-2 - Energy efficiency and renewable energy sources. Common international terminology
- BS-IEC-63277 - Binary power generation systems with capacity less than 100 kW. Performance test methods
- BS-ISO-17741 - General technical rules for measurement, calculation and verification of energy savings of projects
- BS-ISO-17743 - Energy savings. Definition of a methodological framework applicable to calculation and reporting on energy savings
- BS-ISO-50003 - Energy management systems. Requirements for bodies providing audit and certification of energy management systems
- BS-ISO-50004 - Energy management systems. Guidance for the implementation, maintenance and improvement of an ISO 50001 energy management system
- BS-ISO-50006 - Energy management systems. Evaluating energy performance using energy performance indicators and energy baselines
- BS-ISO-50015 - Energy management systems. Measurement and verification of energy performance of organizations. General principles and guidance
- BS-ISO-50047 - Energy savings. Determination of energy savings in organizations
- CWA-14642 - Electrical Interface for Domestic Cogeneration, Requirements for Distribution Network
- CWA-15693 - Saving Lifetimes of Energy Efficiency Improvement Measures in Bottom-Up Calculations
- PAS-51215 - Energy efficiency assessment. Competence of a lead energy assessor. Specification
- PD-6900 - Environmental impact assessment for offshore renewable energy projects. Guide
- PD-CEN-16103 - Energy management and energy efficiency. Glossary of terms
- PD-CEN-16567 - Energy Efficiency Obligation Schemes in Europe. Overview and analysis of main features and possibilities for harmonisation
- PD-CEN/CLC-16103 - Energy management and energy efficiency. Glossary of terms
- PD-CLC-50403 - Standardization and the liberalization of the energy market
- PD-CLC-50608 - Smart grid projects in Europe
- PD-IEC-62837 - Energy efficiency through automation systems
- PD-IEC-62933-4-1 - Electrical energy storage (EES) systems
- PD-IEC-63097 - Smart grid standardization roadmap
IEC:
ISO:
- ISO-13600 - Technical Corrigendum 1 to ISO 13600:1997
- ISO-13601 - Technical energy systems -- Structure for analysis -- Energyware supply and demand sectors
- ISO-13602-1 - Technical energy systems - Methods for analysis - Part 1: General
- ISO-13602-2 - Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares
- ISO-14617-11 - Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines
- ISO-17741 - General technical rules for measurement, calculation and verification of energy savings of projects
- ISO-17742 - Energy efficiency and savings calculation for countries, regions and cities
- ISO-17743 - Energy savings - Definition of a methodological framework applicable to calculation and reporting on energy savings
- ISO-50001 - Energy management systems - Requirements with guidance for use
- ISO-50001 GUIDE SMES - Energy Management Systems - A practical guide for SMEs
- ISO-50001 SPANISH - Sistemas de gestión de la energía - Requisitos con orientación para su uso
- ISO-50002 - Energy audits - Requirements with guidance for use
- ISO-50002 SPANISH - Energy audits - Requirements with guidance for use (Standard in Spanish)
- ISO-50003 - Energy management systems - Requirements for bodies providing audit and certification of energy management systems
- ISO-50003-SPANISH - Energy management systems - Requirements for bodies providing audit and certification of energy management systems [Standard in Spanish]
- ISO-50004 - Energy management systems - Guidance for the implementation, maintenance and improvement of an ISO 50001 energy management system
- ISO-50006 - Energy management systems - Evaluating energy performance using energy performance indicators and energy baselines
- ISO-50015 - Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance
- ISO-50047 - Energy savings - Determination of energy savings in organizations
- ISO-50049 - Calculation methods for energy efficiency and energy consumption variations at country, region and city levels
- ISO/IEC-13273-1 - Energy efficiency and renewable energy sources - Common international terminology - Part 1: Energy efficiency
- ISO/IEC-13273-1-FREN - Energy efficiency and renewable energy sources - Common international terminology - Part 1: Energy efficiency
- ISO/IEC-13273-2 - Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources
- ISO/IEC-13273-2-FREN - Energy efficiency and renewable energy sources - Common international terminology - Part 1: Energy efficiency
Other SDOs:
- EN-16001 - Energy Management Systems - Requirements With Guidance for Use
- EN-16212 - Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods
- EN-16247-1 - Energy audits - Part 1: General requirements
- EN-16247-2 - Energy audits - Part 2: Buildings
- EN-16247-3 - Energy audits - Part 3: Processes
- EN-16247-4 - Energy audits - Part 4: Transport
- EN-16247-5 - Energy audits - Part 5: Competence of energy auditors
- EN-16325 - Guarantees of Origin related to energy - Guarantees of Origin for Electricity
- EN-16754 - Artisan Gelato and ice cream machinery - Performance characteristics and energy consumption
- EN-16825 - Refrigerated storage cabinets and counters for professional use - Classification, requirements and test conditions
- EN-50597 - Energy Consumption of Vending Machines
- EN-ISO-50001 - Energy management systems - Requirements with guidance for use
- EN-ISO/IEC-13273-1 - Energy efficiency and renewable energy sources - Common international terminology - Part 1: Energy efficiency
- EN-ISO/IEC-13273-2 - Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources
- JIS-B-8123 - Technical declarations for the planning of a cogeneration system
- JIS-C-4441 - Electrical energy storage (EES) systems -- Safety requirements for grid-integrated EES systems -- Electrochemical-based systems
- SIS-CEN/TR-15760 - Heat meters - Checklist documenting the relationship between the Directive 2004/22/EC (MID) and EN 1434:2007
- SIS-CWA-16975 - Eco-efficient Substations for District Heating
- SS-13602-2 - Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares
- SS-EN-13941 - Design and installation of preinsulated bonded pipe systems for district heating
- SS-EN-13941-1 - District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
- SS-EN-13941-2 - District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation
- SS-EN-14122 - Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography
- SS-EN-1434-1 - Thermal energy meters - Part 1: General requirements
- SS-EN-1434-2 - Thermal energy meters - Part 2: Constructional requirements
- SS-EN-1434-4 - Thermal energy meters - Part 4: Pattern approval tests
- SS-EN-1434-5 - Thermal energy meters - Part 5: Initial verification tests
- SS-EN-1434-6 - Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance
- SS-EN-1440 - LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
- SS-EN-14419 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
- SS-EN-15632-1 - District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods
- SS-EN-15632-2 - District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes; requirements and test methods
- SS-EN-15632-3 - District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods
- SS-EN-15632-4 - District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
- SS-EN-15698-1 - District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
- SS-EN-15698-2 - District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
- SS-EN-16001 - Energy management systems - Requirements with guidance for use
- SS-EN-16247-1 - Energy audits - Part 1: General requirements
- SS-EN-16247-2 - Energy audits - Part 2: Buildings
- SS-EN-16247-3 - Energy audits - Part 3: Processes
- SS-EN-16247-4 - Energy audits - Part 4: Transport
- SS-EN-16247-5 - Energy audits - Part 5: Competence of energy auditors
- SS-EN-16325 - Guarantees of Origin related to energy - Guarantees of Origin for Electricity
- SS-EN-16754 - Artisan Gelato and ice cream machinery - Performance characteristics and energy consumption
- SS-EN-16825 - Refrigerated storage cabinets and counters for professional use - Classification, requirements and test conditions
- SS-EN-16825-AM1 - Refrigerated storage cabinets and counters for professional use - Classification, requirements and test conditions
- SS-EN-17267 - Energy measurement and monitoring plan - Design and implementation - Principles for energy data collection
- SS-EN-17463 - Valuation of Energy Related Investments (VALERI)
- SS-EN-253 - District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
- SS-EN-303-6 - Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation and energy performance of water heaters and combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
- SS-EN-448 - District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
- SS-EN-488 - District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
- SS-EN-489 - District heating pipes - Preinsulated bonded pipe systems for direcly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
- SS-EN-489-1 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1
- SS-EN-ISO-10548 - Carbon fibre - Determination of size content (ISO 10548:2002)
- SS-EN-ISO-20031 - Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020)
- SS-EN-ISO-20257-1 - Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 1: General requirements (ISO 20257-1:2020)
- SS-EN-ISO-22041 - Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019)
- SS-EN-ISO-22041-AM1 - Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019)
- SS-EN-ISO-50001 - Energy management systems - Requirements with guidance for use (ISO 50001:2018)
- SS-ISO-13600 - Technical energy systems - Basic concepts
- SS-ISO-13601 - Technical energy systems - Structure for analysis - Energyware supply and demand sectors
- SS-ISO-13602-1 - Technical energy systems - Methods for analysis - Part 1: General
- SS-ISO-13602-2 - Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares (ISO 13602-2:2006, IDT)
- SS-ISO-18195 - Method for the justification of fire partitioning in water cooled nuclear power plants (NPP) (ISO 18195:2019, IDT)
- SS-ISO-18229 - Essential technical requirements for mechanical components and metallic structures foreseen for Generation IV nuclear reactors (ISO 18229:2018, IDT)
- SS-ISO-19013-1 - Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels (ISO 19013-1:2019, IDT)
- SS-ISO-20031 - Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020, IDT)
- SS-ISO-20956 - Radiological protection - Low dose rate calibration of instruments for environmental and area monitoring (ISO 20956:2023, IDT)
- SS-ISO-4037-4 - Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields (ISO 4037-4:2019, IDT)
- SS-ISO-50002 - Energy audits - Requirements with guidance for use (ISO 50002:2014, IDT)
- SS-ISO-50003 - Energy management systems - Requirements for bodies providing audit and certification of energy management systems (ISO 50003:2021, IDT)
- SS-ISO-50006 - Energy management systems - Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) - General principles and guidance (ISO 50006:2014, IDT)
- SS-ISO-50015 - Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance (ISO 50015:2014, IDT)
- UNE-EN-16325 - Guarantees of Origin related to energy - Guarantees of Origin for Electricity