Document Center List of Standards on Organic Coatings
ICS Code 25.220.60
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1055 - Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- ASTM-A975 - Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
- ASTM-D1005 - Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
- ASTM-D1212 - Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
- ASTM-D1474 - Standard Test Methods for Indentation Hardness of Organic Coatings
- ASTM-D1639 - Standard Test Method for Acid Value of Organic Coating Materials (Withdrawn 2005)
- ASTM-D1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
- ASTM-D1653 - Standard Test Methods for Water Vapor Transmission of Organic Coating Films
- ASTM-D2134 - Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
- ASTM-D2197 - Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
- ASTM-D2370 - Standard Test Method for Tensile Properties of Organic Coatings
- ASTM-D2534 - Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
- ASTM-D2793 - Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
- ASTM-D2794 - Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
- ASTM-D2803 - Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
- ASTM-D3003 - Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
- ASTM-D3236 - Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
- ASTM-D4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
- ASTM-D4708 - Standard Practice for Preparation of Uniform Free Films of Organic Coatings
- ASTM-D4828 - Standard Test Methods for Practical Washability of Organic Coatings
- ASTM-D5178 - Standard Test Method for Mar Resistance of Organic Coatings
- ASTM-D5179 - Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
- ASTM-D522 - Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- ASTM-D5402 - Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
- ASTM-D5895 - Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
- ASTM-D6083 - Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
- ASTM-D6132 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
- ASTM-D658 - Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
- ASTM-D6903 - Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
- ASTM-D6905 - Standard Practice for Impact Flexibility of Organic Coatings
- ASTM-D6991 - Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
- ASTM-D7027 - Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
- ASTM-D7093 - Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
- ASTM-D7835 - Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine
- ASTM-D7893 - Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
- ASTM-D968 - Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
- ASTM-F1135 - Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners (Withdrawn 2009)
- ASTM-F1137 - Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
- ASTM-F1664 - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
- ASTM-F1665 - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
- ASTM-F735 - Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
BSI:
- BS-3416 - Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water
- BS-4147 - Specification for Bitumen-Based Hot-Applied Coating Materials for Protecting Iron And
- BS-4164 - Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
- BS-4842 - Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings
- BS-6374-1 - Lining of equipment with polymeric materials for the process idustries.
- BS-6374-2 - Lining of equipment with polymeric materials for the process industries
- BS-6374-3 - Lining of equipment with polymeric materials for the process industries
- BS-6374-4 - Lining of equipment with polymeric materials for the process industries
- BS-6374-5 - Lining of equipment with polymeric materials for the process industries
- BS-6496 - Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
- BS-6497 - Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and preformed sheet coated with powder organic coatings
- BS-6949 - Specification for bitumen-based coatings for cold application excluding use in contact with potable water
- BS-7892 - Specification for seal coats on cement mortar lined ductile iron pipes and fittings
- BS-EN-10169 - Continuously organic coated (coil coated) steel flat products. Technical delivery conditions
- BS-EN-10169-1 - Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
- BS-EN-10169-2 - Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
- BS-EN-10169-3 - Continuously organic coated (coil coated) steel flat products. Products for building interior applications
- BS-EN-10169-TC - Tracked Changes. Continuously organic coated (coil coated) steel flat products. Technical delivery conditions
- BS-EN-10245-1 - Steel wire and wire products. Organic coatings on steel wire
- BS-EN-10245-2 - Steel wire and wire products. Organic coatings on steel wire
- BS-EN-10245-3 - Steel wire and wire products. Organic coatings on steel wire
- BS-EN-10245-4 - Steel wire and wire products. Organic coatings on steel wire
- BS-EN-10245-5 - Steel wire and wire products. Organic coatings on steel wire
- BS-EN-10288 - Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
- BS-EN-10289 - Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
- BS-EN-10290 - Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
- BS-EN-10300 - Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating
- BS-EN-10301 - Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
- BS-EN-10339 - Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection
- BS-EN-13438 - Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
- BS-EN-13523-0 - Coil coated metals. Test methods
- BS-EN-13523-0-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-1 - Coil coated metals. Test methods
- BS-EN-13523-10 - Coil coated metals. Test methods
- BS-EN-13523-10-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-11 - Coil coated metals. Test methods
- BS-EN-13523-12 - Coil coated metals. Test methods
- BS-EN-13523-12-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-13 - Coil coated metals. Test methods
- BS-EN-13523-14 - Coil coated metals. Test methods
- BS-EN-13523-15 - Coil coated metals. Test methods
- BS-EN-13523-16 - Coil coated metals. Test methods
- BS-EN-13523-17 - Coil coated metals. Test methods
- BS-EN-13523-18 - Coil coated metals. Test methods
- BS-EN-13523-19 - Coil coated metals. Test methods
- BS-EN-13523-1-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-2 - Coil coated metals. Test methods
- BS-EN-13523-20 - Coil coated metals. Test methods
- BS-EN-13523-21 - Coil coated metals. Test methods
- BS-EN-13523-21-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-22 - Coil coated metals. Test methods
- BS-EN-13523-22-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-23 - Coil coated metals. Test methods
- BS-EN-13523-23-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-24 - Coil coated metals. Test methods
- BS-EN-13523-24-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-25 - Coil coated metals. Test methods
- BS-EN-13523-25-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-26 - Coil coated metals. Test methods
- BS-EN-13523-26-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-27 - Coil coated metals. Test methods
- BS-EN-13523-27-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-29 - Coil coated metals. Test methods
- BS-EN-13523-29-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-3 - Coil coated metals. Test methods
- BS-EN-13523-3-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-4 - Coil coated metals. Test methods
- BS-EN-13523-5 - Coil coated metals. Test methods
- BS-EN-13523-6 - Coil coated metals. Test methods
- BS-EN-13523-7 - Coil coated metals. Test methods
- BS-EN-13523-7-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-8 - Coil coated metals. Test methods
- BS-EN-13523-8-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-13523-9 - Coil coated metals. Test methods
- BS-EN-13523-9-TC - Tracked Changes. Coil coated metals. Test methods
- BS-EN-14879-1 - 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Terminology, design and preparation of substrate
- BS-EN-14879-2 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on metallic components
- BS-EN-14879-3 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media
- BS-EN-14879-4 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media
- BS-EN-14879-5 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media
- BS-EN-14879-6 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media
- BS-EN-14901 - Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods
- BS-EN-14901-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic coatings of ductile iron fittings and accessories
- BS-EN-14901-2 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic coatings of ductile iron fittings and accessories
- BS-EN-15189 - Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods
- BS-EN-15773 - Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems]. Specifications, recommendations and guidelines
- BS-EN-15773-TC - Tracked Changes. Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems]. Specifications, recommendations and guidelines
- BS-EN-ISO-21809-2 - Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems
- BS-ISO-14656 - Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
- BS-ISO-18768-1 - Organic coatings on aluminium and its alloys. Methods for specifying decorative and protective organic coatings on aluminium
- BS-ISO-18768-2 - Organic coatings on aluminium and its alloys. Methods for specifying decorative and protective organic coatings on aluminium
- BS-ISO-21809-4 - Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems
- DD-ENV-10169-2 - Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
ISO:
- ISO-18768-1 - Organic coatings on aluminium and its alloys - Methods for specifying decorative and protective organic coatings on aluminium - Part 1: Powder coatings
- ISO-18768-2 - Organic coatings on aluminium and its alloys - Methods for specifying decorative and protective organic coatings on aluminium - Part 2: Liquid coatings
Other SDOs:
- DIN-EN-10169-1 - Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods); German version EN 10169-1:2003
- DIN-EN-10169-2 - Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications; German version EN 10169-2:2006
- DIN-EN-10245-4 - Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
- DIN-EN-10300 - Steel Tubes & Fittings for Onshore & Offshore Pipelines - Bituminous Hot Applied Mater
- DIN-EN-10310 - Steel Tubes & Fittings for Onshore & Offshore Pipelines, Internal & External Polyamide
- DIN-EN-10339 - Steel Tubes for Onshore & Offshore Water Pipelines - Internal Liquid Applied Epoxy Lin
- DIN-EN-13438 - Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes; German version EN 13438:2013
- DIN-EN-13523-11 - Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
- DIN-EN-13523-12 - Coil coated metals - Test methods - Part 12: Resistance to scratching; German version EN 13523-12:2017
- DIN-EN-13523-15 - Coil coated metals - Test methods - Part 15: Metamerism; German version EN 13523-15:2015
- DIN-EN-13523-16 - Part 16: Resistance To Abrasion, Coil Coated Metals - Test Methods
- DIN-EN-13523-17 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- DIN-EN-13523-19 - Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
- DIN-EN-13523-20 - Coil coated metals - Test methods - Part 20: Foam adhesion
- DIN-EN-13523-21 - Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels; German version EN 13523-21:2017
- DIN-EN-13523-22 - Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison; German version EN 13523-22:2017
- DIN-EN-13523-23 - Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide; German version EN 13523-23:2015
- DIN-EN-13523-24 - Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking; German version EN 13523-24:2017
- DIN-EN-13523-25 - Coil coated metals - Test methods - Part 25: Resistance to humidity; German version EN 13523-25:2014
- DIN-EN-13523-26 - Coil coated metals - Test methods - Part 26: Resistance to condensation of water; German version EN 13523-26:2014
- DIN-EN-13523-8 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog); German version EN 13523-8:2017
- DIN-EN-14879-1 - Part 1: Terminology, Design & Preparation of Substrate, Organic Coating Systems & Lini
- DIN-EN-14879-2 - Part 2: Coatings on Metallic Components, Organic Coating Systems & Linings for Protect
- DIN-EN-14879-3 - Part 3: Coatings on Concrete Components, Organic Coating Systems & Linings for Protect
- DIN-EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods; German version EN 14901:2014
- DIN-EN-15189 - Ductile Iron Pipes, Fittings & Accessories - External Polyurethane Coating for Pipes -
- EN-10169-1 - Part 1: General Information (Definitions, Materials, Tolerances, Test Methods), Contin
- EN-10169-2 - Part 2: Products for Buildings Exterior Applications, Continuously Organic Coated (Coi
- EN-10245-1 - Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
- EN-10245-2 - Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
- EN-10245-3 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
- EN-10245-4 - Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
- EN-10245-5 - Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
- EN-10288 - Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
- EN-10289 - Steel Tubes & Fittings for Onshore & Offshore Pipelines, External Liquid Applied Epoxy
- EN-10290 - Steel Tubes & Fittings for Onshore & Offshore Pipelines, External Liquid Applied Polyu
- EN-10300 - Steel Tubes & Fittings for Onshore & Offshore Pipelines - Bituminous Hot Applied Mater
- EN-10301 - Steel Tubes & Fittings for on & Offshore Pipelines, Internal Coating for the Reduction
- EN-10339 - Steel Tubes for Onshore & Offshore Water Pipelines - Internal Liquid Applied Epoxy Lin
- EN-13438 - Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
- EN-13523-0 - Coil coated metals - Test methods - Part 0: General introduction
- EN-13523-1 - Coil coated metals - Test methods - Part 1: Film thickness
- EN-13523-10 - Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
- EN-13523-11 - Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
- EN-13523-12 - Coil coated metals - Test methods - Part 12: Resistance to scratching
- EN-13523-13 - Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
- EN-13523-14 - Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
- EN-13523-15 - Coil coated metals - Test methods - Part 15: Metamerism
- EN-13523-16 - Part 16: Resistance To Abrasion, Coil Coated Metals - Test Methods
- EN-13523-17 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- EN-13523-19 - Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
- EN-13523-2 - Coil coated metals - Test methods - Part 2: Gloss
- EN-13523-20 - Coil coated metals - Test methods - Part 20: Foam adhesion
- EN-13523-21 - Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
- EN-13523-22 - Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
- EN-13523-23 - Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
- EN-13523-24 - Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
- EN-13523-25 - Coil coated metals - Test methods - Part 25: Resistance to humidity
- EN-13523-26 - Coil coated metals - Test methods - Part 26: Resistance to condensation of water
- EN-13523-27 - Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
- EN-13523-29 - Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
- EN-13523-3 - Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- EN-13523-4 - Coil coated metals - Test methods - Part 4: Pencil hardness
- EN-13523-5 - Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
- EN-13523-7 - Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
- EN-13523-8 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
- EN-13523-9 - Coil coated metals - Test methods - Part 9: Resistance to water immersion
- EN-14879-1 - Part 1: Terminology, Design & Preparation of Substrate, Organic Coating Systems & Lini
- EN-14879-2 - Part 2: Coatings on Metallic Components, Organic Coating Systems & Linings for Protect
- EN-14879-3 - Part 3: Coatings on Concrete Components, Organic Coating Systems & Linings for Protect
- EN-14879-4 - Organic Coating Systems & Linings for Protection of Industrial Apparatus & Plants Agai
- EN-14879-5 - Organic Coating Systems & Linings for Protection of Industrial Apparatus & Plants Agai
- EN-14879-6 - Part 6: Combined Linings With Tile & Brick Layers, Organic Coating Systems & Linings F
- EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
- EN-15189 - Ductile Iron Pipes, Fittings & Accessories - External Polyurethane Coating for Pipes -
- EN-15773 - Industrial Application of Powder Organic Coatings To Hot Dip Galvanized or Sherardized
- EN-ISO-21809-2 - Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings
- SS-EN-10169 - Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
- SS-EN-10169-1 - Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
- SS-EN-10169-2 - Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
- SS-EN-10169-3 - Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
- SS-EN-10245-1 - Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
- SS-EN-10245-2 - Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
- SS-EN-10245-3 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
- SS-EN-10245-4 - Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
- SS-EN-10245-5 - Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
- SS-EN-10288 - Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
- SS-EN-10289 - Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
- SS-EN-10290 - Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
- SS-EN-10300 - Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
- SS-EN-10301 - Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
- SS-EN-10310 - Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
- SS-EN-10339 - Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
- SS-EN-12068 - Cathodic protection - External organic coatings for the corrosion protection of buired or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
- SS-EN-13438 - Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
- SS-EN-13523-0 - Coil coated metals - Test methods - Part 0: General introduction
- SS-EN-13523-1 - Coil coated metals - Test methods - Part 1: Film thickness
- SS-EN-13523-10 - Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
- SS-EN-13523-11 - Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
- SS-EN-13523-12 - Coil coated metals - Test methods - Part 12: Resistance to scratching
- SS-EN-13523-13 - Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
- SS-EN-13523-14 - Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
- SS-EN-13523-15 - Coil coated metals - Test methods - Part 15: Metamerism
- SS-EN-13523-16 - Coil coated metals - Test methods - Part 16: Resistance to abrasion
- SS-EN-13523-17 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- SS-EN-13523-18 - Coil coated metals - Test methods - Part 18: Resistance to staining
- SS-EN-13523-19 - Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
- SS-EN-13523-2 - Coil coated metals - Test methods - Part 2: Gloss
- SS-EN-13523-20 - Coil coated metals - Test methods - Part 20: Foam adhesion
- SS-EN-13523-21 - Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
- SS-EN-13523-22 - Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
- SS-EN-13523-23 - Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
- SS-EN-13523-24 - Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
- SS-EN-13523-25 - Coil coated metals - Test methods - Part 25: Resistance to humidity
- SS-EN-13523-26 - Coil coated metals - Test methods - Part 26: Resistance to condensation of water
- SS-EN-13523-27 - Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
- SS-EN-13523-29 - Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
- SS-EN-13523-3 - Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
- SS-EN-13523-4 - Coil coated metals - Test methods - Part 4: Pencil hardness
- SS-EN-13523-5 - Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
- SS-EN-13523-6 - Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
- SS-EN-13523-7 - Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
- SS-EN-13523-8 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
- SS-EN-13523-9 - Coil coated metals - Test methods - Part 9: Resistance to water immersion
- SS-EN-14879-1 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
- SS-EN-14879-2 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
- SS-EN-14879-3 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
- SS-EN-14879-4 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
- SS-EN-14879-5 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
- SS-EN-14879-6 - Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
- SS-EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
- SS-EN-14901-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
- SS-EN-14901-2 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
- SS-EN-15189 - Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
- SS-EN-16074 - Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
- SS-EN-ISO-24026-1 - Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)
- SS-EN-ISO-24026-2 - Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)
- SS-ISO-8820-11 - Road vehicles - Fuse-links - Part 11: Fuse-links with tabs (blade type) Type M (medium-high current) (ISO 8820-11:2020, IDT)