Document Center List of Standards on Welding, Brazing And Soldering In General Including Welders' Qualifications
ICS Code 25.160.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A488 - Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
- ASTM-B1001 - Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans
- ASTM-E2261 - Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
- ASTM-E749 - Standard Practice for Acoustic Emission Monitoring During Continuous Welding
BSI:
- BS-2653 - Specification for protective clothing for welders
- BS-4515-2 - Specification for welding of steel pipelines on land and offshore
- BS-4870-3 - Specification for approval testing of welding procedures. Arc welding of tube to tube-plate joints in metallic materials
- BS-4870-4 - Specification for approval testing of welding procedures. Specification for automatic fusion welding of metallic materials, including welding operator approval
- BS-4871-3 - Specification for approval testing of welders working to approved welding procedures
- BS-4872-1 - Specification for approval testing of welders when welding procedure approval is not required
- BS-4872-2 - Specification for approval testing of welders when welding procedure approval is not required
- BS-499-1 - Welding terms and symbols
- BS-499-2C - Welding terms and symbols. European arc welding symbols in chart form
- BS-EN-14717 - Welding and allied processes. Environmental check list
- BS-EN-14717-TC - Tracked Changes. Welding and allied processes. Environmental check list
- BS-EN-1792 - Welding. Multilingual list of terms for welding and related processes
- BS-EN-287-1 - Qualification test of welders. Fusion welding
- BS-EN-287-6 - Qualification test of welders. Fusion welding
- BS-EN-287-6-TC - Tracked Changes. Qualification test of welders. Fusion welding
- BS-EN-288-8 - Specification and approval of welding procedures for metallic materials
- BS-EN-4877-001-TC - Tracked Changes. Aerospace series. Filler metals for welding
- BS-EN-60974-1 - Arc welding equipment
- BS-EN-60974-5 - Arc welding equipment
- BS-EN-62822-2 - Electric welding equipment. Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz)
- BS-EN-IEC-60974-5 - Arc welding equipment
- BS-EN-ISO-10882-1 - Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-10882-1-TC - Tracked Changes. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-10882-2-TC - Tracked Changes. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-11611 - Protective clothing for use in welding and allied processes
- BS-EN-ISO-13585 - Brazing. Qualification testing of brazers and brazing operators
- BS-EN-ISO-13585-TC - Tracked Changes. Brazing. Qualification testing of brazers and brazing operators
- BS-EN-ISO-14554-1 - Quality requirements for welding. Resistance welding of metallic materials
- BS-EN-ISO-14554-2 - Quality requirements for welding. Resistance welding of metallic materials
- BS-EN-ISO-14731 - Welding coordination. Tasks and responsibilities
- BS-EN-ISO-14732 - Welding personnel. Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
- BS-EN-ISO-15611-TC - Tracked Changes. Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience
- BS-EN-ISO-17279-1 - Welding. Micro joining of 2nd generation high temperature superconductors
- BS-EN-ISO-17279-2 - Welding. Micro joining of 2nd generation high temperature superconductors
- BS-EN-ISO-17279-3 - Welding. Micro joining of second generation high temperature superconductors
- BS-EN-ISO-17663 - Welding. Quality requirements for heat treatment in connection with welding and allied processes
- BS-EN-ISO-17663-TC - Tracked Changes. Welding. Quality requirements for heat treatment in connection with welding and allied processes
- BS-EN-ISO-18278-1 - Resistance welding. Weldability
- BS-EN-ISO-18278-1-TC - Tracked Changes. Resistance welding. Weldability
- BS-EN-ISO-18785-3 - Friction stir spot welding. Aluminium
- BS-EN-ISO-21904-1 - Health and safety in welding and allied processes. Equipment for capture and separation of welding fume
- BS-EN-ISO-21904-3 - Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration
- BS-EN-ISO-25239-3 - Friction stir welding. Aluminium
- BS-EN-ISO-3834-1 - Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-1-TC - Tracked Changes. Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-2 - Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-3 - Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-4 - Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-4-TC - Tracked Changes. Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-5 - Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-6 - Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-3834-6-TC - Tracked Changes. Quality requirements for fusion welding of metallic materials
- BS-EN-ISO-4063 - Welding, brazing, soldering and cutting. Nomenclature of processes and reference numbers
- BS-ISO-11745 - Brazing for aerospace applications. Qualification test for brazers and brazing operators. Brazing of metallic components
- BS-ISO-11745-TC - Tracked Changes. Brazing for aerospace applications. Qualification test for brazers and brazing operators. Brazing of metallic components
- BS-ISO-16338 - Welding for aerospace applications. Resistance spot and seam welding
- BS-ISO-16338-TC - Tracked Changes. Welding for aerospace applications. Resistance spot and seam welding
- BS-ISO-17533 - Welding for aerospace applications. Welding information in design documents
- BS-ISO-17607-5 - Steel structures. Execution of structural steelwork
- BS-ISO-17927-1 - Welding for aerospace applications. Fusion welding of metallic components
- BS-ISO-17927-2 - Welding for aerospace applications. Fusion welding of metallic components
- BS-ISO-18785-3 - Friction stir spot welding. Aluminium
- BS-ISO-19828 - Welding for aerospace applications. Visual inspection of welds
- BS-ISO-22688 - Brazing. Quality requirements for brazing of metallic materials
- BS-ISO-23493 - Welding and allied processes. Process specification for laser-arc hybrid welding for metallic materials
- BS-ISO-24394 - Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
- BS-ISO-24394-TC - Tracked Changes. Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
- PD-CEN-ISO-14745 - Welding. Post-weld heat treatment parameters for steels
- PD-CEN-ISO-15608 - Welding. Guidelines for a metallic materials grouping system
- PD-CEN-ISO-3834-6 - Quality requirements for fusion welding of metallic materials
- PD-CR-14599 - Terms and definitions for welding purposes in relation with EN 1792
- PD-CR-ISO-17663 - Welding. Guidelines for quality requirements for heat treatment in connection with welding and allied processes
- PD-ISO-13392 - Health and safety in welding and allied processes. Arc welding fume components
- PD-ISO-18166 - Numerical welding simulation. Execution and documentation
- PD-ISO-18491 - Welding and allied processes. Guidelines for measurement of welding energies
- PD-ISO-18786 - Health and safety in welding. Guidelines for risk assessment of welding fabrication activities
- PD-ISO-24471 - Brazing. Grouping systems for materials. American materials
ISO:
- ISO-10882-1 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles
- ISO-10882-2 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 2: Sampling of gases
- ISO-11611 - Protective clothing for use in welding and allied processes
- ISO-11745 - Brazing for aerospace applications - Qualification test for brazers and brazing operators - Brazing of metallic components
- ISO-11745-AM1 - - Amendment 1
- ISO-13392 - Health and safety in welding and allied processes - Arc welding fume components
- ISO-13585 - Brazing - Qualification testing of brazers and brazing operators
- ISO-14554-1 - Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
- ISO-14554-2 - Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
- ISO-14731 - Welding coordination - Tasks and responsibilities
- ISO-14732 - Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
- ISO-14745 - Welding - Post-weld heat treatment parameters for steels
- ISO-15608 - Welding - Guidelines for a metallic materials grouping system
- ISO-15611 - Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
- ISO-15618-1 - Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding
- ISO-15618-2 - Qualification testing of welders for underwater welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding
- ISO-16338 - Welding for aerospace applications - Resistance spot and seam welding
- ISO-17279-1 - Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure
- ISO-17279-2 - Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel
- ISO-17279-3 - Welding - Micro joining of second generation high temperature superconductors - Part 3: Test methods for joints
- ISO-17533 - Welding for aerospace applications - Welding information in design documents
- ISO-17607-5 - Steel structures - Execution of structural steelwork - Part 5: Welding
- ISO-17663 - Welding - Quality requirements for heat treatment in connection with welding and allied processes
- ISO-17779 - Brazing - Specification and qualification of brazing procedures for metallic materials
- ISO-17846 - Welding and allied processes - Health and safety - Wordless precautionary labels for equipment and consumables used in arc welding and cutting
- ISO-17927-1 - Welding for aerospace applications - Fusion welding of metallic components - Part 1: Process specification
- ISO-17927-2 - Welding for aerospace applications - Fusion welding of metallic components - Part 2: Acceptance criteria
- ISO-18166 - Numerical welding simulation - Execution and documentation
- ISO-18278-1 - Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
- ISO-18491 - Welding and allied processes - Guidelines for measurement of welding energies
- ISO-18785-3 - Friction stir spot welding - Aluminium - Part 3: Qualification of welding personnel
- ISO-18786 - Health and safety in welding - Guidelines for risk assessment of welding fabrication activities
- ISO-19828 - Welding for aerospace applications - Visual inspection of welds
- ISO-21904-1 - Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements
- ISO-21904-2 - Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency
- ISO-21904-3 - Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices
- ISO-22688 - Brazing - Quality requirements for brazing of metallic materials
- ISO-23493 - Welding and allied processes - Process specification for laser-arc hybrid welding for metallic materials
- ISO-24394 - Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components
- ISO-24394-AM1 - - Amendment 1
- ISO-24471 - Brazing - Grouping systems for materials - American materials
- ISO-25239-3 - Friction stir welding - Aluminium - Part 3: Qualification of welding operators
- ISO-3834-1 - Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements
- ISO-3834-2 - Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
- ISO-3834-3 - Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
- ISO-3834-4 - Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
- ISO-3834-5 - Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
- ISO-3834-6 - Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing the ISO 3834 series
- ISO-4063 - Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers
- ISO-581 - Weldability - Metallic materials - General principles
- ISO-9606-1 - Qualification testing of welders - Fusion welding - Part 1: Steels
- ISO-9606-1-1 - Amendment 1 to ISO 9606-1:1994
- ISO-9606-2 - Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
- ISO-9606-3 - Approval testing of welders -- Fusion welding -- Part 3: Copper and copper alloys
- ISO-9606-4 - Approval testing of welders -- Fusion welding -- Part 4: Nickel and nickel alloys
- ISO-9606-5 - Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
Other SDOs:
- BS-EN-18007-3 - Electromagnetic pulse welding
- DIN-EN-14717 - Welding & Allied Processes - Environmental Check List
- DIN-EN-14730-2 - Part 2: Qualification of Aluminothermic Welders, Approval of Contractors & Acceptance
- DIN-EN-ISO-14731 - Welding Coordination - Tasks & Responsibilities
- DIN-EN-ISO-15011-4 - Part 4: Fume Data Sheets, Health & Safety in Welding & Allied Processes - Laboratory M
- DS-EN-287-1 - Qualification Test of Welders - Fusion Welding - Part 1: Steels
- EN-14717 - Welding & Allied Processes - Environmental Check List
- EN-287-1 - Qualification test of welders - Fusion welding - Part 1: Steels
- EN-287-6 - Part 6: Cast Iron, Qualification Test of Welders - Fusion Welding
- EN-ISO-10882-1 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
- EN-ISO-11611 - Protective clothing for use in welding and allied processes
- EN-ISO-13585 - Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)
- EN-ISO-14554-1 - Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013)
- EN-ISO-14554-2 - Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013)
- EN-ISO-14731 - Welding Coordination - Tasks & Responsibilities
- EN-ISO-14732 - Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
- EN-ISO-15608 - Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2005)
- EN-ISO-17279-1 - Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure (ISO 17279-1:2018)
- EN-ISO-17279-2 - Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel (ISO 17279-2:2018)
- EN-ISO-17663 - Welding - Quality Requirements for Heat Treatment in Connection With Welding & Allied
- EN-ISO-21904-3 - Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices
- EN-ISO-25239-3 - Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2011)
- EN-ISO-3834-1 - Part 1: Criteria for the Selection of the Appropriate Level of Quality Requirements,
- EN-ISO-3834-2 - Part 2: Comprehensive Quality Requirements, Quality Requirements for Fusion Welding Of
- EN-ISO-3834-3 - Part 3: Standard Quality Requirements, Quality Requirements for Fusion Welding of Met
- EN-ISO-3834-4 - Part 4: Elementary Quality Requirements, Quality Requirements for Fusion Welding of Me
- EN-ISO-3834-5 - Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
- EN-ISO-4063 - Welding & Allied Processes - Nomenclature of Processes & Reference Numbers
- EN-ISO-9606-1 - Qualification testing of welders - Fusion welding - Part 1: Steels
- JIS-G-3128 - High yield strength steel plates for welded structure
- JIS-Z-3021 - Welding and allied processes - Symbolic representation
- JIS-Z-3609-2 - Friction stir welding -- Aluminium -- Part 2: Quality requirements, welding procedures and welding personnel
- JIS-Z-3881 - Standard qualification procedure for gas pressure welding technique of steel bars for concrete reinforcement
- SIS-CEN-ISO/TR-15608 - Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
- SIS-CEN-ISO/TR-3834-6 - Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007)
- SIS-CEN-ISO/TS-18166 - Numerical welding simulation - Execution and documentation (ISO/TS 18166:2016)
- SIS-CEN/TR-15481 - Welding of reinforcing steel - Tack weldability - Test methods and performance requirements
- SIS-CR-ISO/TR-17663 - Welding - Guidelines for quality requirements for heat treatment in connection with welding and allied processes (ISO/TR 17663:2001)
- SIS-EN-60974-1 - Arc welding equipment - Part 1: Welding power sources
- SIS-ISO/TR-14345 - Fatigue Fatigue testing of welded components Guidance (ISO/TR 14345:2012, IDT)
- SIS-ISO/TR-18491 - Guidelines for measurement of welding energies
- SS-EN-14717 - Welding and allied processes - Environmental check list
- SS-EN-14730-2 - Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
- SS-EN-15085-2 - Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
- SS-EN-287-1 - Qualification test of welders - Fusion welding - Part 1: Steels
- SS-EN-287-6 - Qualification test of welders - Fusion welding - Part 6: Cast irons
- SS-EN-ISO-10882-1 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
- SS-EN-ISO-11611 - Protective clothing for use in welding and allied processes (ISO 11611:2015)
- SS-EN-ISO-13585 - Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)
- SS-EN-ISO-13920 - Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:2023)
- SS-EN-ISO-14554-1 - Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013)
- SS-EN-ISO-14554-2 - Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013)
- SS-EN-ISO-14731 - Welding coordination - Tasks and responsibilities (ISO 14731:2019)
- SS-EN-ISO-14732 - Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
- SS-EN-ISO-15011-1 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
- SS-EN-ISO-15011-2 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
- SS-EN-ISO-15011-3 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)
- SS-EN-ISO-15618-1 - Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016)
- SS-EN-ISO-17279-1 - Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure (ISO 17279-1:2018)
- SS-EN-ISO-17279-2 - Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel (ISO 17279-2:2018)
- SS-EN-ISO-17279-3 - Welding - Micro joining of second generation high temperature superconductors - Part 3: Test methods for joints (ISO 17279-3:2021)
- SS-EN-ISO-17663 - Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009)
- SS-EN-ISO-18278-1 - Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)
- SS-EN-ISO-18785-3 - Friction stir spot welding - Aluminium - Part 3: Qualification of welding personnel (ISO 18785-3:2018)
- SS-EN-ISO-21420 - Protective gloves - General requirements and test methods (ISO 21420:2020)
- SS-EN-ISO-21853 - Kite boarding - Release system - Safety requirements and test methods (ISO 21853:2020)
- SS-EN-ISO-21904-1 - Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020)
- SS-EN-ISO-21904-2 - Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020)
- SS-EN-ISO-21904-3 - Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018)
- SS-EN-ISO-25239-3 - Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020)
- SS-EN-ISO-3834-1 - Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
- SS-EN-ISO-3834-2 - Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
- SS-EN-ISO-3834-3 - Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
- SS-EN-ISO-3834-4 - Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
- SS-EN-ISO-3834-5 - Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
- SS-EN-ISO-4063 - Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers (ISO 4063:2023)
- SS-EN-ISO-9606-1 - Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
- SS-ISO-16338 - Welding for aerospace applications - Resistance spot and seam welding (ISO 16338:2013, IDT)
- SS-ISO-18785-3 - Friction stir spot welding - Aluminium - Part 3: Qualification of welding personnel (ISO 18785-3:2018, IDT)
- SS-ISO-22688 - Brazing - Quality requirements for brazing of metallic materials (ISO 22688:2020, IDT)
- SS-ISO-24394 - Welding for aerospace applications Qualification test for welders and welding operators Fusion welding of metallic components (ISO 24394:2023, IDT)
- SS-ISO-24394-AM1 - Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components - Amendment 1 (ISO 24394:2008/Amd 1:2012, IDT)
- UNE-EN-ISO-15618-1 - Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding
- UNE-EN-ISO-3834-5 - Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4