Document Center List of Standards on Pneumatic Tools
ICS Code 25.140.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-4390 - Specification for portable pneumatic grinding machines
- BS-5344 - Methods for performance tests for rotary and percussive pneumatic tools
- BS-673 - Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings
- BS-EN-792-4 - Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools
- BS-EN-792-8 - Hand-Held Non-Electric Power Tools. Safety Requirements. Sanders and Polishers
- BS-EN-ISO-11148-10 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-11 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-12 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-13 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-2 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-3 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-4 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-5 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-6 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-7 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-8 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-11148-9 - Hand-held non-electric power tools. Safety requirements
- BS-EN-ISO-28927-1 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-12 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-13 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-2 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-3 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-5 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-6 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-7 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-8 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-9 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-ISO-5393 - Rotary tools for threaded fasteners. Performance test method
- DD-ISO-17104 - Rotary tool for threaded fasteners. Hydraulic impulse tools. Performance test method
- DD-ISO-21108 - Hand-held power tools. Impulse wrenches. Dimensions and tolerances of interface to power socket
IEC:
- IEC-60745-2-8 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
- IEC-60745-2-8-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
ISO:
- ISO-11123 - Pneumatic tools and machines -- Electronic interfaces
- ISO-11148-1 - Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
- ISO-11148-10 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
- ISO-11148-11 - Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
- ISO-11148-12 - Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws
- ISO-11148-13 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
- ISO-11148-2 - Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
- ISO-11148-3 - Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
- ISO-11148-4 - Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
- ISO-11148-5 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
- ISO-11148-6 - Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
- ISO-11148-7 - Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
- ISO-11148-8 - Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
- ISO-11148-9 - Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
- ISO-1180 - Shanks for pneumatic tools and fitting dimensions of chuck bushings
- ISO-1180/1 - Addendum 1 to ISO 1180:1983
- ISO-17104 - Rotary tool for threaded fasteners- Hydraulic impulse tools - Performance test method
- ISO-17609 - Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test
- ISO-21108 - Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket
- ISO-2787 - Rotary and percussive pneumatic tools - Performance tests
- ISO-28927-1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders
- ISO-28927-10 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
- ISO-28927-11 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers
- ISO-28927-12 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders
- ISO-28927-13 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools
- ISO-28927-1-AM1 - - Amendment 1: Cupped wire brushes
- ISO-28927-2 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers
- ISO-28927-2-AM1 - - Amendment 1: Changes in Annex C - Brake devices
- ISO-28927-3 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders
- ISO-28927-4 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders
- ISO-28927-4-AM1 - - Amendment 1: Cupped wire brushes
- ISO-28927-5 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills
- ISO-28927-5-AM1 - - Amendment 1: Feed force
- ISO-28927-6 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers
- ISO-28927-7 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears
- ISO-28927-8 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action
- ISO-28927-8-AM1 - - Amendment 1: Polishing machines, modified feed forces
- ISO-28927-8-AM2 - - Amendment 2: Oscillating knives (vibrating screen removal tools)
- ISO-28927-9 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers
- ISO-3857-1 - Compressors, pneumatic tools and machines - Vocabulary - Part 1: General
- ISO-3857-3 - Compressors, pneumatic tools and machines - Vocabulary - Part 3: Pneumatic tools and machines
- ISO-3857-4 - Compressors, pneumatic tools and machines - Vocabulary - Part 4: Air treatment
- ISO-5393 - Rotary tools for threaded fasteners - Performance test method
- ISO-5941 - Compressors, pneumatic tools and machines - Preferred pressures
- ISO-6544 - Hand-held pneumatic assembly tools for installing threaded fasteners - Reaction torque and torque impulse measurements
- ISO-8662-1 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 1 : General
- ISO-8662-10 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears
- ISO-8662-11 - Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 11: Fastener driving tools
- ISO-8662-11-1 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools - Amendment 1
- ISO-8662-12 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action
- ISO-8662-13 - Technical Corrigendum 1 to ISO 8662-13:1997
- ISO-8662-14 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers
- ISO-8662-2 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers
- ISO-8662-2-1 - Amendment 1 to ISO 8662-2:1992
- ISO-8662-3 - Part 3: Rock Drills & Rotary Hammers, Hand-Held Portable Power Tools - Measurement of Vibr
- ISO-8662-3-1 - Amendment 1 to ISO 8662-3:1992
- ISO-8662-4 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders
- ISO-8662-5 - Part 5: Pavement Breakers & Hammers for Construction Work, Hand-Held Portable Power Tools
- ISO-8662-5-1 - Amendment 1 to ISO 8662-5:1992
- ISO-8662-6 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills
- ISO-8662-7 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
- ISO-8662-8 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders
- ISO-8662-9 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers
Other SDOs:
- DIN-EN-792-7 - Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
- EN-792-7 - Part 7: Grinders, Hand-Held Non-Electric Power Tools - Safety Requirements
- EN-ISO-11148-1 - Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
- EN-ISO-11148-11 - Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
- EN-ISO-11148-12 - Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
- EN-ISO-11148-13 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
- EN-ISO-11148-2 - Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)
- EN-ISO-11148-3 - Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
- EN-ISO-11148-4 - Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
- EN-ISO-11148-5 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
- EN-ISO-11148-6 - Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
- EN-ISO-11148-7 - Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
- EN-ISO-11148-8 - Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
- EN-ISO-11148-9 - Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
- EN-ISO-28927-1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes
- EN-ISO-28927-10 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
- EN-ISO-28927-11 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers
- EN-ISO-28927-12 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)
- EN-ISO-28927-2 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)
- EN-ISO-28927-3 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)
- EN-ISO-28927-4 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
- EN-ISO-28927-5 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills
- EN-ISO-28927-6 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)
- EN-ISO-28927-7 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)
- EN-ISO-28927-8 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces
- EN-ISO-28927-8/A2 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO 28927-8:2009/Amd 2:2019)
- EN-ISO-28927-9 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
- SIS-ISO/TR-27609 - Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test (ISO/TR 27609:2007, IDT)
- SIS-ISO/TS-17104 - Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method
- SIS-ISO/TS-21108 - Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket
- SS-EN-28662-1 - Hand-held power tools - Measurement of vibration at the handle - Part 1: General (ISO 8662-1:1988)
- SS-EN-28662-2 - Hand-held portable power tools - Measurement of vibration at the handle - Part 2: Chipping hammers and riveting hammers
- SS-EN-28662-2-AM1 - Hand-held portable tools - Measurements of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)
- SS-EN-28662-3 - Hand-held portable power tools - Measurement of vibration at the handle - Part 3: Rock drills and rotary hammers
- SS-EN-28662-3-AM1 - Hand-held portable tools - Measurements of vibrations at the handle - Part 3: Roch drills and rotary hammers (ISO 8662-3:1992)
- SS-EN-28662-3-AM2 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers (ISO 8662-3:1992/Amd 1:1999)
- SS-EN-28662-5 - Hand-held portable power tools - Measurement of vibration at the handle - Part 5: Pavement breakersand hammers for construction work
- SS-EN-28662-5-AM1 - Hand-held portable tools - Measurements of vibrations at the handle - Part 5: Pavement breakers andhammers for construction work (ISO 8662-5:1992)
- SS-EN-792-1 - Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
- SS-EN-792-10 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
- SS-EN-792-11 - Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
- SS-EN-792-12 - Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
- SS-EN-792-13 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
- SS-EN-792-2 - Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
- SS-EN-792-3 - Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
- SS-EN-792-4 - Hand-held non-electric power tools - Safety requirements - Part 4: Non rotary percussive power tools
- SS-EN-792-5 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
- SS-EN-792-6 - Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
- SS-EN-792-7 - Hand-held non electric power tools - Safety requirements - Part 7: Grinders
- SS-EN-792-8 - Hand-held non electric power tools - Safety requirements - Part 8: Sanders and polishers
- SS-EN-792-9 - Hand-held non electric power tools - Safety requirements - Part 9: Die grinders
- SS-EN-ISO-11148-1 - Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
- SS-EN-ISO-11148-10 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
- SS-EN-ISO-11148-11 - Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
- SS-EN-ISO-11148-12 - Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
- SS-EN-ISO-11148-13 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
- SS-EN-ISO-11148-2 - Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
- SS-EN-ISO-11148-3 - Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
- SS-EN-ISO-11148-4 - Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
- SS-EN-ISO-11148-5 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
- SS-EN-ISO-11148-6 - Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
- SS-EN-ISO-11148-7 - Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
- SS-EN-ISO-11148-8 - Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
- SS-EN-ISO-11148-9 - Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
- SS-EN-ISO-28927-1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
- SS-EN-ISO-28927-10 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)
- SS-EN-ISO-28927-11 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011)
- SS-EN-ISO-28927-12 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)
- SS-EN-ISO-28927-13 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
- SS-EN-ISO-28927-1-AM1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)
- SS-EN-ISO-28927-2 - Hand-held portable power tools - Test method for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)
- SS-EN-ISO-28927-2-AM1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
- SS-EN-ISO-28927-3 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)
- SS-EN-ISO-28927-4 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
- SS-EN-ISO-28927-4-AM1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders - Amendment 1: Cupped wire brushes (ISO 28927-4:2010/Amd 1:2017)
- SS-EN-ISO-28927-5 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)
- SS-EN-ISO-28927-5-AM1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
- SS-EN-ISO-28927-6 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)
- SS-EN-ISO-28927-7 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)
- SS-EN-ISO-28927-8 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)
- SS-EN-ISO-28927-8-AM1 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
- SS-EN-ISO-28927-8-AM2 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2 (ISO 28927-8:2009/DAM 2:2018)
- SS-EN-ISO-28927-9 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)
- SS-EN-ISO-8662-10 - Hand-held portable power tools - Measurement of vibration at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998)
- SS-EN-ISO-8662-12 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997)
- SS-EN-ISO-8662-13 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders
- SS-EN-ISO-8662-14 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996)
- SS-EN-ISO-8662-4 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)
- SS-EN-ISO-8662-6 - Hand-held portable power tools - Measurement of vibrations at handle - Part 6: Impact drills (ISO 8662-6:1994)
- SS-EN-ISO-8662-7 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers, and nuts runners with impact, impuls or ratchet action (ISO 8662-7:1997)
- SS-EN-ISO-8662-8 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997)
- SS-EN-ISO-8662-9 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996)
- SS-ISO-2787 - Rotary and percussive pneumatic tools - Performance tests
- SS-ISO-3857-1 - Compressors, pneumatic tools and machines - Vocabulary - Part 1: General (ISO 3857-1:1977, IDT)
- SS-ISO-3857-3 - Compressors, pneumatic tools and machines - Vocabulary - Part 3: Pneumatic tools and machines (ISO 3857-3:1989, IDT)
- SS-ISO-3857-4 - Compressors, pneumatic tools and machines - Vocabulary - Part 4: Air treatment (ISO 3857-4:2012, IDT)
- SS-ISO-5391 - Pneumatic tools and machines - Vocabulary (ISO 5391:2003, IDT)
- SS-ISO-5393 - Rotary tools for threaded fasteners - Performance test method (ISO 5393:2017, IDT)
- SS-ISO-8662-1 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General
- SS-ISO-8662-2 - Hand-held portable power tools - Measurement of vibration at the handle - Part 2: Chipping hammers and riveting hammers
- SS-ISO-8662-3 - Hand-held portable power tools - Measurement of vibration at the handle - Part 3: Rock drills and rotary hammers
- SS-ISO-8662-4 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders
- SS-ISO-8662-5 - Hand-held portable power tools - Measurement of vibration at the handle - Part 5: Pavement breakersand hammers for construction work
- SS-ISO-8662-6 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills
- UNE-EN-ISO-28927-8 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action