Document Center List of Standards on Moulding Equipment
ICS Code 25.120.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-7564-2 - Tools for moulding
- BS-7564-3 - Tools for moulding
- BS-7564-9 - Tools for moulding
- BS-EN-1247 - Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
- BS-EN-1265 - Safety of machinery. Noise test code for foundry machines and equipment
- BS-EN-710 - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
- BS-EN-869 - Safety of machinery. Safety requirements for pressure metal diecasting units
- BS-EN-ISO-23062-TC - Tracked Changes. Foundry machinery. Safety requirements for molding and coremaking machinery and associated equipment
- BS-ISO-10072 - Tools for moulding. Sprue bushes. Dimensions
- BS-ISO-10907-1 - Tools for moulding. Locating rings
- BS-ISO-10907-2 - Tools for moulding. Locating rings
- BS-ISO-12165 - Tools for moulding. Components of compression and injection moulds and diecasting dies. List of equivalent terms and symbols
- BS-ISO-15600 - Tools for moulding. Thermal insulating sheets for injection moulds
- BS-ISO-16915 - Tools for moulding. Sprue pullers
- BS-ISO-16916 - Tools for moulding. Tool specification sheet for injection moulds
- BS-ISO-23472-1 - Foundry machinery. Vocabulary
- BS-ISO-23472-2 - Foundry machinery. Vocabulary
- BS-ISO-23472-3 - Foundry machinery. Vocabulary
- BS-ISO-24233 - Tools for moulding. Tool specification sheet for diecasting dies
- BS-ISO-6751 - Tools for moulding. Ejector pins with cylindrical head
- BS-ISO-6753-2 - Tools for pressing and moulding. Machined plates
- BS-ISO-8017 - Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered
- BS-ISO-8018 - Tools for moulding. Guide bushes, headed, and locating guide bushes, headed
- BS-ISO-8404 - Tools for moulding. Angle pins
- BS-ISO-8404-TC - Tracked Changes. Tools for moulding. Angle pins
- BS-ISO-8405 - Tools for moulding. Ejector sleeves with cylindrical head. Basic series for general purposes
- BS-ISO-8406 - Tools for moulding. Mould bases. Round locating elements and spacers
- BS-ISO-8693 - Tools for moulding. Flat ejector pins
- BS-ISO-8694 - Tools for moulding. Shouldered ejector pins
- BS-ISO-9449 - Tools for moulding. Centring sleeves
ISO:
- ISO-10072 - Tools for moulding - Sprue bushes - Dimensions
- ISO-10073 - Tools for moulding - Support pillars
- ISO-10907-1 - Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
- ISO-10907-2 - Tools for moulding - Locating rings - Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
- ISO-12165 - Tools for moulding - Components of compression and injection moulds and diecasting dies - List of equivalent terms and symbols
- ISO-15600 - Tools for moulding -- Thermal insulating sheets for injection moulds
- ISO-16915 - Tools for moulding - Sprue pullers
- ISO-16916 - Tools for moulding - Tool specification sheet for injection moulds
- ISO-23062 - Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment
- ISO-23472-1 - Foundry machinery - Vocabulary - Part 1: General
- ISO-23472-2 - Foundry machinery - Vocabulary - Part 2: Molding and coremaking machines and other equipment related to non-permanent mold casting process
- ISO-23472-3 - Foundry machinery - Vocabulary - Part 3: Die casting machines and other equipment related to permanent mold casting process
- ISO-24233 - Tools for moulding - Tool specification sheet for diecasting dies
- ISO-28238 - Compression and injection moulds - Components for gating systems
- ISO-6751 - Tools for moulding - Ejector pins with cylindrical head
- ISO-6753-2 - Tools for pressing and moulding - Machined plates - Part 2: Machined plates for moulds
- ISO-8017 - Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered
- ISO-8018 - Tools for moulding - Guide bushes, headed, and locating guide bushes, headed
- ISO-8404 - Tools for moulding - Angle pins
- ISO-8405 - Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes
- ISO-8406 - Tools for moulding - Mould bases - Round locating elements and spacers
- ISO-8693 - Tools for moulding - Flat ejector pins
- ISO-8694 - Tools for moulding - Shouldered ejector pins
- ISO-9449 - Tools for moulding - Centring sleeves
Other SDOs:
- DIN-EN-1247 - Foundry Machinery - Safety Requirements for Ladies, Pouring Equipment, Centrifugal Ca
- DIN-EN-869 - Safety of Machinery - Safety Requirements for Pressure Metal Diecasting Units
- DIN-ISO-10072 - Tools for Moulding, Sprue Bushes - Dimensions
- DIN-ISO-10907-1 - Part 1: Locating Rings for Mounting Without Thermal Insulating Sheets in Small or Medi
- DIN-ISO-16915 - Tools for Moulding, Sprue Pullers
- DIN-ISO-8404 - Tools for moulding - Angle pins
- EN-1247 - Foundry Machinery - Safety Requirements for Ladies, Pouring Equipment, Centrifugal Ca
- EN-1248 - Foundry Machinery - Safety Requirements for Abrasive Blasting Equipment
- EN-710 - Safety of machinery. Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
- EN-869 - Safety of machinery. Safety requirements for pressure metal diecasting units
- SS-EN-1247 - Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
- SS-EN-1248 - Foundry machinery - Safety requirements for abrasive blasting equipment
- SS-EN-1265 - Safety of machinery - Noise test code for foundry machines and equipment
- SS-EN-13108-2 - Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
- SS-EN-1369 - Founding - Magnetic particle testing
- SS-EN-1370 - Founding - Examination of surface condition
- SS-EN-710 - Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
- SS-EN-869 - Safety of machinery - Safety requirements for pressure metal diecasting units
- SS-EN-ISO-23062 - Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)
- SS-ISO-10072 - Tools for moulding - Sprue bushes - Dimensions (ISO 10072:2004, IDT)
- SS-ISO-10073 - Tools for moulding - Support pillars (ISO 10073:2008, IDT)
- SS-ISO-10907-1 - Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) (ISO 10907-1:2008, IDT)
- SS-ISO-10907-2 - Tools for moulding - Locating rings - Part 2: Locating ring for mounting with thermal insulating sheets in small or medium moulds (types C and D) (ISO 10907-2:2007, IDT)
- SS-ISO-12165 - Tools for moulding - Components of compression and injection moulds and diecasting dies - List of equivalent terms and symbols (ISO 12165:2019, IDT)
- SS-ISO-15600 - Tools for moulding - Thermal insulating sheets for injection moulds
- SS-ISO-16916 - Tools for moulding - Tool specification sheet for injection moulds (ISO 16916:2016, IDT)
- SS-ISO-24233 - Tools for moulding - Tool specification sheet for diecasting dies (ISO 24233:2008, IDT)
- SS-ISO-6751 - Tools for moulding - Ejector pins with cylindrical head (ISO 6751:2011, IDT)
- SS-ISO-6753-2 - Tools for pressing and moulding - Machined plates - Part 2: Machined plates for moulds
- SS-ISO-8017 - Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered (ISO 8017:2007, IDT)
- SS-ISO-8018 - Tools for moulding - Guide bushes, headed, and locating guide bushes, headed (ISO 8018:2007, IDT)
- SS-ISO-8404 - Tools for moulding - Angle pins (ISO 8404:2021, IDT)
- SS-ISO-8405 - Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes (ISO 8405:2023, IDT)
- SS-ISO-8406 - Tools for moulding - Mould bases - Round locating elements and spacers (ISO 8406:2008, IDT)
- SS-ISO-8693 - Tools for moulding - Flat ejector pins (ISO 8693:2011, IDT)
- SS-ISO-8694 - Tools for moulding - Shouldered ejector pins (ISO 8694:2011, IDT)
- SS-ISO-9449 - Tools for moulding - Centring sleeves (ISO 9449:2007, IDT)