Document Center List of Standards on Abrasives
ICS Code 25.100.70
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1353 - Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
- ASTM-D2825 - Standard Terminology Relating to Polishes and Related Materials
- ASTM-D3836 - Standard Practice for Evaluation of Automotive Polish
- ASTM-E1257 - Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
- ASTM-F2358 - Standard Guide for Measuring Characteristics of Sapphire Substrates
- ASTM-G174 - Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
BSI:
- BS-4481-1 - Bonded abrasive products. Specification for general features of abrasive wheels, segments, bricks and sticks
- BS-4581-1 - Flanges for mounting grinding wheels on grinding machine tools. Specification for dimensions of flanges for grinding wheels of 76.2 mm bore and greater
- BS-4581-2 - Flanges for mounting grinding wheels on grinding machine tools.
- BS-5587 - Specification for coated abrasives. Flap wheels with incorporated flanges or separate flanges. Designation and dimensions
- BS-5851 - Specification for grain sizes of diamond or cubic boron nitride
- BS-7007-2 - Abrasive products. Specification for designation and dimensions of coated abrasive flap wheels with shafts
- BS-7079-F10 - Group F: Non-Metallic Blast-Cleaning Abrasives - Almandite Garnet
- BS-7425-3 - Abrasive grains. Method for sampling and splitting
- BS-7425-4 - Abrasive grains
- BS-EN-1083-1 - Power-driven brushes
- BS-EN-1083-2 - Power-driven brushes
- BS-EN-12413 - Safety requirements for bonded abrasive products
- BS-EN-13236 - Safety requirements for superabrasive products
- BS-EN-13743 - Safety requirements for coated abrasive products
- BS-EN-13743-TC - Tracked Changes. Safety requirements for coated abrasive products
- BS-EN-ISO-11126-10-TC - Tracked Changes. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives
- BS-EN-ISO-6103 - Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Static testing
- BS-ISO-13942 - Bonded abrasive products. Limit deviations and run-out tolerances
- BS-ISO-15635 - Coated abrasives. Flap discs
- BS-ISO-15636 - Back-up pads for vulcanized fibre discs
- BS-ISO-15637-1 - Holding fixtures of cylindrical abrasive sleeves
- BS-ISO-15637-2 - Holding fixtures of cylindrical abrasive sleeves
- BS-ISO-16057 - Coated abrasives. Vulcanized fibre discs
- BS-ISO-21537-1 - Clamping flanges for superabrasive cutting-off wheels. Natural stone
- BS-ISO-21537-2 - Clamping flanges for superabrasive cutting-off wheels
- BS-ISO-21538 - Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering
- BS-ISO-21538-TC - Tracked Changes. Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering
- BS-ISO-21948 - Coated abrasives. Plain sheets
- BS-ISO-21949 - Coated abrasives. Plain sheets with holes for dust extraction
- BS-ISO-21950 - Coated abrasives. Plain discs
- BS-ISO-21951 - Coated abrasives. Plain discs with holes for dust extraction
- BS-ISO-22917 - Precision superabrasives. Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
- BS-ISO-2421 - Coated abrasives. Cylindrical sleeves
- BS-ISO-2976 - Coated abrasives. Abrasive belts. Selection of width/length combinations
- BS-ISO-3366 - Coated abrasives. Abrasive rolls
- BS-ISO-3919 - Coated abrasives. Flap wheels with shaft
- BS-ISO-525 - Bonded abrasive products. Shape types, designation and marking
- BS-ISO-5429 - Coated abrasives. Flap wheels with incorporated flanges or separate flanges
- BS-ISO-603-1 - Bonded abrasive products. Dimensions
- BS-ISO-603-10 - Bonded abrasive products. Dimensions
- BS-ISO-603-11 - Bonded abrasive products. Dimensions
- BS-ISO-603-12 - Bonded abrasive products. Dimensions
- BS-ISO-603-13 - Bonded abrasive products. Dimensions
- BS-ISO-603-14 - Bonded abrasive products Dimensions
- BS-ISO-603-14-TC - Tracked Changes. Bonded abrasive products. Dimensions
- BS-ISO-603-15 - Bonded abrasive products. Dimensions
- BS-ISO-603-16 - Bonded abrasive products. Dimensions
- BS-ISO-603-16-TC - Tracked Changes. Bonded abrasive products. Dimensions
- BS-ISO-603-17 - Bonded abrasive products. Dimensions
- BS-ISO-603-18 - Bonded abrasive products. Dimensions
- BS-ISO-603-2 - Bonded abrasive products. Dimensions
- BS-ISO-603-3 - Bonded abrasive products. Dimensions
- BS-ISO-603-4 - Bonded abrasive products. Dimensions
- BS-ISO-603-5 - Bonded abrasive products. Dimensions
- BS-ISO-603-6 - Bonded abrasive products. Dimensions
- BS-ISO-603-7 - Bonded abrasive products. Dimensions
- BS-ISO-603-8 - Bonded abrasive products. Dimensions
- BS-ISO-603-8-TC - Tracked Changes. Bonded abrasive products. Dimensions
- BS-ISO-603-9 - Bonded abrasive products. Dimensions
- BS-ISO-603-9-TC - Tracked Changes. Bonded abrasive products. Dimensions
- BS-ISO-6104 - Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designation and multilingual nomenclature
- BS-ISO-6105-1 - Blanks for Superabrasive Cutting-Off Wheels, Manually Guided Cutting-Off in Building &
- BS-ISO-6105-2 - Blanks for Superabrasive Cutting-Off Wheels, Hand-Held Cutting-Off in Building & Civil
- BS-ISO-6106 - Abrasive products. Checking the grain size of superabrasives
- BS-ISO-6344-2 - Coated abrasives. Grain size analysis
- BS-ISO-6344-3 - Coated abrasives. Determination and designation of grain size distribution
- BS-ISO-666 - Machine tools. Mounting of grinding wheels by means of hub flanges
- BS-ISO-8486-2 - Bonded abrasives. Determination and designation of grain size distribution
- BS-ISO-9136-1 - Abrasive grains. Determination of bulk density
- BS-ISO-9136-2 - Abrasive grains. Determination of bulk density. Microgrits
- BS-ISO-9138 - Abrasive grains. Sampling and splitting
- BS-ISO-9284 - Abrasive grains. Test-sieving machines
- BS-ISO-9285 - Abrasive grains and crude. Chemical analysis of fused aluminium oxide
- BS-ISO-9286 - Abrasive grains and crude. Chemical analysis of silicon carbide
- BS-ISO-9286-TC - Tracked Changes. Abrasive grains and crude. Chemical analysis of silicon carbide
ISO:
- ISO-13942 - Bonded abrasive products - Limit deviations and run-out tolerances
- ISO-15635 - Coated abrasives -- Flap discs
- ISO-15636 - Back-up pads for vulcanized fibre discs
- ISO-15637-1 - Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand-held grinding machines
- ISO-15637-2 - Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines
- ISO-16057 - Coated abrasives - Vulcanized fibre discs
- ISO-1929 - Abrasive belts - Dimensions, tolerances and designation
- ISO-21537-1 - Clamping flanges for superabrasive cutting-off wheels - Part 1: Natural stone
- ISO-21537-2 - Clamping flanges for superabrasive cutting-off wheels - Part 2: Building and construction
- ISO-21538 - Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering
- ISO-21948 - Coated abrasives -- Plain sheets
- ISO-21949 - Coated abrasives -- Plain sheets with holes for dust extraction
- ISO-21950 - Coated abrasives -- Plain discs
- ISO-21951 - Coated abrasives -- Plain discs with holes for dust extraction
- ISO-2220 - Hand Finishing Sticks and Oil Stones - Dimensions
- ISO-2235 - Abrasive Sheets - Dimensions, Tolerances and Designation
- ISO-22917 - Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
- ISO-2421 - Coated abrasives - Cylindrical sleeves
- ISO-24857 - Synthetic industrial diamond grit products - Single-particle compressive failure strength - DiaTest-SI system
- ISO-2976 - Coated abrasives - Abrasive belts - Selection of width/length combinations
- ISO-3366 - Coated abrasives -- Abrasive rolls
- ISO-3919 - Coated abrasives - Flap wheels with shaft
- ISO-3919-AM1 - - Amendment 1
- ISO-525 - Bonded abrasive products - Shape types, designation and marking
- ISO-5429 - Coated abrasives - Flap wheels with incorporated flanges or separate flanges
- ISO-603-1 - Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres
- ISO-603-10 - Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings
- ISO-603-11 - Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
- ISO-603-12 - Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
- ISO-603-13 - Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder
- ISO-603-14 - Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
- ISO-603-15 - Bonded abrasive products - Dimensions - Part 15: Cutting-off wheels on stationary or mobile cutting-off machines
- ISO-603-16 - Bonded abrasive products - Dimensions - Part 16: Cutting-off wheels on hand held power tools
- ISO-603-17 - Bonded abrasive products - Dimensions - Part 17: Spindle mounted wheels (ISO type 52)
- ISO-603-18 - Bonded abrasive products - Dimensions - Part 18: Grinding wheels for flat glass edge grinding machines
- ISO-603-2 - Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external cylindrical grinding
- ISO-603-3 - Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding
- ISO-603-4 - Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding
- ISO-603-5 - Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face grinding
- ISO-603-6 - Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding
- ISO-603-7 - Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding
- ISO-603-8 - Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging
- ISO-603-9 - Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding
- ISO-6103 - Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing
- ISO-6104 - Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature
- ISO-6105-1 - Part 1: Manually Guided Cutting-Off in Building and Civil Engineering, Blanks for Superabras
- ISO-6105-2 - Part 2: Hand-Held Cutting-Off in Building and Civil Engineering, Blanks for Superabrasive Cu
- ISO-6106 - Abrasive products - Checking the grain size of superabrasives
- ISO-6344-1 - Coated abrasives - Grain size analysis - Part 1: Grain size distribution test
- ISO-6344-2 - Coated abrasives - Determination and designation of grain size distribution - Part 2: Macrogrit sizes P12 to P220
- ISO-6344-3 - Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000
- ISO-666 - Machine tools - Mounting of grinding wheels by means of hub flanges
- ISO-8486-1 - Bonded abrasives - Determination and designation of grain size distribution - Part l: Macrogrits F4 to F220
- ISO-8486-2 - Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F2000
- ISO-9136-1 - Abrasive grains - Determination of bulk density - Part 1: Macrogrits
- ISO-9136-2 - Abrasive grains -- Determination of bulk density -- Part 2: Microgrits
- ISO-9137 - Abrasive grains - Determination of capillarity
- ISO-9138 - Abrasive grains - Sampling and splitting
- ISO-9284 - Abrasive grains - Test-sieving machines
- ISO-9285 - Abrasive grains and crude - Chemical analysis of fused aluminium oxide
- ISO-9286 - Abrasive grains and crude - Chemical analysis of silicon carbide
Other SDOs:
- DIN-EN-13236/A1 - Amendment 1 for Din-En-13236, Safety Requirements for Superabrasives
- DIN-EN-13743 - Safety requirements for coated abrasive products; German version EN 13743:2017
- DIN-ISO-15636 - Back-Up Pads for Vulcanized Fibre Discs
- DIN-ISO-21537-1 - Part 1: Natural Stone, Clamping Flanges for Superabrasive Cutting-Off Wheels
- DIN-ISO-21537-2 - Part 2: Building & Construction, Clamping Flanges for Superabrasive Cutting-Off Wheels
- DIN-ISO-21538 - Blanks for Superabrasive Cutting-Off Wheels - Mounting & Fixing Bores, Building Constr
- DIN-ISO-22917 - Superabrasives, Limit Deviations & Run-Out Tolerances for Grinding Wheels With Diamond
- DIN-ISO-2976 - Coated Abrasives - Abrasive Belts, Selection of Width/Length Combinations
- DIN-ISO-3919 - Coated abrasives - Flap wheels with shaft
- DIN-ISO-5429 - Coated abrasives - Flap wheels with incorporated flanges or separate flanges (ISO 5429:2012)
- DIN-ISO-6104 - Superabrasive Products, Rotating Grinding Tools With Diamond or Cubic Boron Nitride, G
- DIN-ISO-6105-1 - Part 1: Manually Guided Cutting-Off in Building & Civil Engineering, Blanks for Supera
- DIN-ISO-6105-2 - Part 2: Hand-Held Cutting-Off in Building & Civil Engineering, Blanks for Superabrasiv
- DIN-ISO-6106 - Abrasive products - Checking the grain size of superabrasives
- DIN-ISO-666 - Machine tools - Mounting of grinding wheels by means of hub flanges (ISO 666:2012)
- DIN-ISO-9136-1 - Part 1: Macrogrits, Abrasive Grains - Determination of Bulk Density
- EN-1083-1 - Power-Driven Brushes, Definitions & Nomenclature
- EN-1083-2 - Power-Driven Brushes, Safety Requirements
- EN-12413 - Safety requirements for bonded abrasive products
- EN-13236 - Safety requirements for superabrasive products
- EN-13236/A1 - Safety Requirements for Superabrasives
- EN-13743 - Safety requirements for coated abrasive products
- EN-1442/A2 - Transportable Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (Lpg), Des
- EN-ISO-6103 - Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing
- JIS-R-6130 - Testing method for bulk density of artificial abrasives
- SS-EN-12413 - Safety requirements for bonded abrasive products
- SS-EN-13236 - Safety requirements for superabrasive products
- SS-EN-13236-AM1 - Safety requirements for superabrasives
- SS-EN-13743 - Safety requirements for coated abrasive products
- SS-EN-ISO-6103 - Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014)
- SS-ISO-15635 - Coated abrasives - Flap discs
- SS-ISO-21538 - Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering (ISO 21538:2016, IDT)
- SS-ISO-21948 - Coated abrasives - Plain sheets
- SS-ISO-21949 - Coated abrasives - Plain sheets with holes for dust extraction
- SS-ISO-21950 - Coated abrasives - Plain discs
- SS-ISO-21951 - Coated abrasives - Plain discs with holes for dust extraction
- SS-ISO-22917 - Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2016, IDT)
- SS-ISO-2421 - Coated abrasives - Cylindrical sleeves (ISO 2421:2003, IDT)
- SS-ISO-2976 - Coated abrasives - Abrasive belts - Selection of width/length combinations (ISO 2976:2005, IDT)
- SS-ISO-3366 - Coated abrasive products - Abrasive rolls
- SS-ISO-3919 - Coated abrasives - Flap wheels with shaft (ISO 3919:2005, IDT)
- SS-ISO-3919-AM1 - Coated abrasives - Flap wheels with shaft - Amendment 1 (ISO 3919:2005/Amd 1:2014, IDT)
- SS-ISO-525 - Bonded abrasive products - Shape types, designation and marking (ISO 525:2020, IDT)
- SS-ISO-5429 - Coated abrasives - Flap wheels with incorporated flanges or separate flanges (ISO 5429:2012, IDT)
- SS-ISO-603-1 - Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres
- SS-ISO-603-10 - Bonded abrasive products - Dimensions - Part 10: Stones for honing and superfinishings
- SS-ISO-603-11 - Bonded abrasive products - Dimensions - Part 11: Hand finishing sticks
- SS-ISO-603-12 - Bonded abrasive products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder
- SS-ISO-603-13 - Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder
- SS-ISO-603-14 - Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
- SS-ISO-603-15 - Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off machines on stationary or mobile cutting-off machines
- SS-ISO-603-16 - Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools
- SS-ISO-603-17 - Bonded abrasive products - Dimensions - Part 17: Spindle mounted wheels (ISO type 52) (ISO 603-17:2014, IDT)
- SS-ISO-603-18 - Bonded abrasive products - Dimensions - Part 18: Grinding wheels for flat glass edge grinding machines (ISO 603-18:2013, IDT)
- SS-ISO-603-2 - Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centerless external cylindrical grinding
- SS-ISO-603-3 - Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding
- SS-ISO-603-4 - Bonded abrasive products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding
- SS-ISO-603-5 - Bonded abrasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding
- SS-ISO-603-6 - Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding
- SS-ISO-603-7 - Bonded abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding
- SS-ISO-603-8 - Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging
- SS-ISO-603-9 - Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding
- SS-ISO-6103 - Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing (ISO 6103:1999)
- SS-ISO-6105-2 - Blanks for superabrasive cutting-off wheels - Part 2: Hand-held cutting-off in building and civil engineering (ISO 6105-2:2004, IDT)
- SS-ISO-6106 - Abrasive products - Checking the grain size of superabrasives (ISO 6106:2013, IDT)
- SS-ISO-666 - Machine tools - Mounting of grinding wheels by means of hub flanges (ISO 666:2012, IDT)
- SS-ISO-8486-2 - Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F 230 to F 2000 (ISO 8486-2:2007, IDT)
- SS-ISO-9136-1 - Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004, IDT)
- SS-ISO-9136-2 - Abrasive grains - Determination of bulk density - Part 2: Microgrits