Document Center List of Standards on Taps And Threading Dies
ICS Code 25.100.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-1127 - Specification for circular machine screwing dies, hand screwing dies and hexagon dienuts
- BS-1127-1 - Screwing dies and dienuts
- BS-1127-2 - Screwing dies and dienuts
- BS-1127-3 - Screwing dies and dienuts
- BS-1127-4 - Screwing dies and dienuts. Terminology for circular screwing dies
- BS-1127-5 - Screwing dies and dienuts. Specification for dimensions of hexagon dienuts
- BS-1813 - Specification for dimensions of conduit dies, diestocks and guides
- BS-3409-1 - Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)
- BS-3409-2 - Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads)
- BS-949-1 - Screwing taps. Specification of general dimensions
- BS-949-2 - Screwing taps
- BS-949-3 - Screwing taps. Specification for pipe thread taps
- BS-949-4 - Screwing taps
- BS-949-5 - Screwing taps
- BS-EN-61029-2-12 - Safety of transportable motor-operated electric tools
- BS-EN-ISO-4230 - Hand- and machine-operated circular screwing dies for taper pipe threads. R series
- BS-EN-ISO-4231 - Hand- and machine-operated circular screwing dies for parallel pipe threads. G series
- BS-ISO-2284 - Hand taps for parallel and taper pipe threads. General dimensions and marking
- BS-ISO-529 - Short machine taps and hand taps
- BS-ISO-8051 - Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
IEC:
ISO:
- ISO-2283 - Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps
- ISO-2283-1 - Amendment 1:1977 To ISO-2283:1972 Long Shank Machine Taps With Nominal Diameters From 3 To
- ISO-2284 - Hand taps for parallel and taper pipe threads - General dimensions and marking
- ISO-2568 - Hand- and machine-operated circular screwing dies and hand-operated die stocks
- ISO-2857 - Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion
- ISO-2857-1 - Amendment 1 to ISO 2857:1973
- ISO-2857-2 - Amendment 2 to ISO 2857:1973
- ISO-4230 - Hand- and machine-operated circular screwing dies for taper pipe threads - R series
- ISO-4231 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
- ISO-529 - Short machine taps and hand taps
- ISO-5396 - Hardmetal heading dies - Terminology
- ISO-5407 - As-sintered hardmetal pellets used in heading dies - Dimensions and tolerances
- ISO-5967 - Taps and thread cutting - Nomenclature of the main types and terminology
- ISO-5968 - Circular screwing dies - Terminology
- ISO-5969 - Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion
- ISO-7226 - Hexagonal dienuts
- ISO-8051 - Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess
- ISO-8830 - High-speed steel machine taps with ground threads - Technical specifications
Other SDOs:
- DIN-2181 - Sets of 2 taps for metric fine ISO-threads M1 X 0,2 to M52 X 4
- DIN-2184-1 - Taps and cold forming taps - Part 1: Long type; General plan of dimensions
- DIN-2184-2 - Part 2: Basic Dimensions of Short Shank Taps, Screwing Taps& Cold Forming Taps
- DIN-802-6 - Part 6: Ground Taps for Tapped Holes (Eg) for Wire Thread Inserts as in Din-8140 for I
- EN-61029-2-12 - Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines
- EN-ISO-4230 - Hand- and machine-operated circular screwing dies for taper pipe threads - R series
- EN-ISO-4231 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
- JIS-B-0176-1 - Threading tools -- Vocabulary Part 1: Taps
- JIS-B-0176-2 - Threading tools -- Vocabulary Part 2: Thread cutting dies
- JIS-B-0176-3 - Threading tools -- Vocabulary Part 3: Chaser
- JIS-B-0176-4 - Threading tools -- Vocabulary Part 4: Thread rolling dies
- JIS-B-4501 - Thread rolling cylindrical dies
- SMS-9012 - Screw cutting tools - List of Swedish standards
- SS-3588 - Hardmetal burrs - General specifications
- SS-3589 - Hardmetal burrs - Cylindrical burrs - Style A
- SS-3590 - Hardmetal burrs - Cylindrical round-(ball-)nose burrs - Style C
- SS-3591 - Hardmetal burrs - Spherical burrs - Style D
- SS-3592 - Hardmetal burrs - Oval burrs - Style E
- SS-3593 - Hardmetal burrs - Arch round-(ball-)nose burrs - Style F
- SS-3594 - Hardmetal burrs - Arch pointed-nose burrs - StyleG
- SS-3595 - Hardmetal burrs - Flame burrs - Style H
- SS-3596 - Hardmetal burrs - 60 degrees and 90 degrees cone burrs - Styles J and K
- SS-3597 - Hardmetal burrs - Conical round-(ball-)nose burrs- Style L
- SS-3598 - Hardmetal burrs - Conical pointed-nose burrs - Style M
- SS-3599 - Hardmetal burrs - Inverted cone burrs - Style N
- SS-EN-ISO-4230 - Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
- SS-EN-ISO-4231 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
- SS-ISO-2284 - Hand taps for parallel and taper pipe threads - General dimensions and marking (ISO 2284:2017, IDT)
- SS-ISO-2568 - Hand- and machine-operated circular screwing diesand hand-operated die stocks
- SS-ISO-2857 - Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion
- SS-ISO-4230 - Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016, IDT)
- SS-ISO-4231 - Hand- and machine-operated circular screwing diesfor parallel pipe threads - G series
- SS-ISO-529 - Short machine taps and hand taps (ISO 529:2017, IDT)
- SS-ISO-5967 - Taps for thread cutting - Nomenclature of the main types and terminology
- SS-ISO-5968 - Circular screwing dies - Terminology
- SS-ISO-5969 - Ground thread taps for pipe threads G and Rp - Tolerances on the threaded portion
- SS-ISO-8051 - Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess (ISO 8051:2016, IDT)