Document Center List of Standards on Machine Tools In General
ICS Code 25.080.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-3641-1 - Symbols for machine tools
- BS-3641-3 - Specification for symbols for machine tools.
- BS-3800-3 - General tests for machine tools
- BS-4656-16 - Accuracy of machine tools and methods of test
- BS-4656-38 - Accuracy of machine tools and methods of test
- BS-EN-14070 - Safety of machine tools. Transfer and special-purpose machines
- BS-EN-50370-1 - Electromagnetic compatibility (EMC). Product family standard for machine tools
- BS-EN-50370-2 - Electromagnetic compatibility (EMC). Product family standard for machine tools
- BS-EN-ISO-16089 - Machine tools. Safety. Stationary grinding machines
- BS-EN-ISO-16090-1 - Machine tools safety. Machining centres, Milling machines, Transfer machines
- BS-EN-ISO-16090-1-TC - Tracked Changes. Machine tools safety. Machining centres, milling machines, transfer machines
- BS-EN-ISO-16092-1 - Machine tools safety. Presses
- BS-EN-ISO-16092-2 - Machine tools safety. Presses
- BS-EN-ISO-16092-3 - Machine tools safety. Presses
- BS-EN-ISO-16092-4 - Machine tools safety. Presses
- BS-EN-ISO-16093 - Machine tools. Safety. Sawing machines for cold metal
- BS-EN-ISO-23125 - Machine tools. Safety. Turning machines
- BS-EN-ISO-28881 - Machine tools. Safety. Electrical discharge machines
- BS-EN-ISO-28881-TC - Tracked Changes. Machine tools. Safety. Electrical discharge machines
- BS-ISO-14955-1 - Machine tools. Environmental evaluation of machine tools
- BS-ISO-14955-1-TC - Tracked Changes. Machine tools. Environmental evaluation of machine tools
- BS-ISO-14955-2 - Machine tools. Environmental evaluation of machine tools
- BS-ISO-14955-3 - Machine tools. Environmental evaluation of machine tools
- BS-ISO-14955-4 - Machine tools. Environmental evaluation of machine tools
- BS-ISO-14955-5 - Machine tools. Environmental evaluation of machine tools
- BS-ISO-230-1 - Test code for machine tools
- BS-ISO-230-10 - Test code for machine tools
- BS-ISO-230-10-TC - Tracked Changes. Test code for machine tools
- BS-ISO-230-12 - Test code for machine tools
- BS-ISO-230-2 - Test code for machine tools
- BS-ISO-230-3 - Test code for machine tools
- BS-ISO-230-5 - Test code for machine tools
- BS-ISO-230-6 - Test code for machine tools
- BS-ISO-230-7 - Test code for machine tools
- BS-ISO-26303 - Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools
- BS-ISO-28881 - Machine tools. Safety. Electro-discharge machines
- BS-ISO-8525 - Airborne noise emitted by machine tools. Operating conditions for metal-cutting machines
- PD-6490 - Guide to application of additional symbols (and index) for machine tools
- PD-ISO-16907 - Machine tools. Numerical compensation of geometric errors
- PD-ISO-17243-1 - Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing
- PD-ISO-17243-2 - Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts
- PD-ISO-17529 - Machine tools. Practical guidance and example of risk assessment on electro-discharge machines
- PD-ISO-230-11 - Test code for machine tools
- PD-ISO-230-8 - Test code for machine tools
- PD-ISO-230-9 - Test code for machine tools
ISO:
- ISO-14955-1 - Machine tools - Environmental evaluation of machine tools - Part 1: Design methodology for energy-efficient machine tools
- ISO-14955-2 - Machine tools - Environmental evaluation of machine tools - Part 2: Methods for measuring energy supplied to machine tools and machine tool components
- ISO-14955-3 - Machine tools - Environmental evaluation of machine tools - Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency
- ISO-14955-4 - Machine tools - Environmental evaluation of machine tools - Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency
- ISO-14955-5 - Machine tools - Environmental evaluation of machine tools - Part 5: Principles for testing woodworking machine tools with respect to energy supplied
- ISO-16089 - Machine tools - Safety - Stationary grinding machines
- ISO-16090-1 - Machine tools safety - Machining centres, milling machines, transfer machines - Part 1: Safety requirements
- ISO-16092-1 - Machine tools safety - Presses - Part 1: General safety requirements
- ISO-16092-2 - Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses
- ISO-16092-3 - Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses
- ISO-16092-4 - Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses
- ISO-16093 - Machine tools - Safety - Sawing machines for cold metal
- ISO-16156 - Machine-tools safety - Safety requirements for the design and construction of work holding chucks
- ISO-16907 - Machine tools - Numerical compensation of geometric errors
- ISO-17243-1 - Machine tool spindles - Evaluation of machine tool spindle vibrations by measurements on spindle housing - Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
- ISO-17243-2 - Machine tool spindles - Evaluation of spindle vibrations by measurements on non-rotating parts - Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
- ISO-17243-3 - Machine tool spindles - Evaluation of machine tool spindle vibrations by measurements on spindle housing - Part 3: Gear-driven spindles with rolling bearings operating at speeds between 600 r/min and 12 000 r/min
- ISO-17529 - Machine tools - Practical guidance and example of risk assessment on electro-discharge machines
- ISO-229 - Machine tools - Speeds and feeds
- ISO-230-1 - Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- ISO-230-10 - Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
- ISO-230-10-AM1 - - Amendment 1: Measuring performance with scanning probes
- ISO-230-11 - Test code for machine tools - Part 11: Measuring instruments suitable for machine tool geometry tests
- ISO-230-12 - Test code for machine tools - Part 12: Accuracy of finished test pieces
- ISO-230-2 - Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- ISO-230-2-AM1 - - Amendment 1
- ISO-230-3 - Test code for machine tools - Part 3: Determination of thermal effects
- ISO-230-5 - Test code for machine tools -- Part 5: Determination of the noise emission
- ISO-230-6 - Test code for machine tools - Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
- ISO-230-7 - Test code for machine tools - Part 7: Geometric accuracy of axes of rotation
- ISO-230-8 - Test code for machine tools - Part 8: Vibrations
- ISO-230-9 - Test code for machine tools - Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
- ISO-23125 - Machine tools - Safety - Turning machines
- ISO-23125-AM1 - Machine tools - Safety - Turning machines - Amendment 1
- ISO-26303 - Machine tools - Short-term capability evaluation of machining processes on metal-cutting machine tools
- ISO-28881 - Machine tools - Safety - Electrical discharge machines
- ISO-369 - Machine tools - Symbols for indications appearing on machine tools
- ISO-447 - Machine tools - Direction of operation of controls
- ISO-8525 - Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines
Other SDOs:
- DIN-EN-14070 - Safety of Machine Tools - Transfer & Special-Purpose Machines
- DIN-ISO-230-5 - Part 5: Determination of the Noise Emission, Test Code for Machine Tools
- EN-14070 - Safety of Machine Tools - Transfer & Special-Purpose Machines
- EN-ISO-16089 - Machine tools - Safety - Stationary grinding machines
- EN-ISO-16090-1 - Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
- EN-ISO-16092-1 - Machine tools safety - Presses - Part 1: General safety requirements
- EN-ISO-16093 - Machine tools - Safety - Sawing machines for cold metal
- EN-ISO-23125 - Machine tools - Safety - Turning machines
- EN-ISO-28881 - Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)
- JIS-B-6011 - Machine tools -- Direction of operation of controls
- SIS-ISO/TR-230-11 - Test code for machine tools - Part 11: Measuring instruments suitable for machine tool geometry tests
- SIS-ISO/TR-230-9 - Test code for machine tools - Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
- SIS-ISO/TS-13399-204 - Cutting tool data representation and exchange - Part 204: Creation and exchange of 3D models Inserts for reaming (ISO/TS 13399-204:2016, IDT)
- SIS-ISO/TS-13399-307 - Cutting tool data representation and exchange - Part 307: Creation and exchange of 3D models End mills for indexable inserts (ISO/TS13399-307:2016, IDT)
- SIS-ISO/TS-13399-308 - Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts (ISO/TS13399-308:2016, IDT)
- SIS-ISO/TS-13399-312 - Cutting tool data representation and exchange - Part 312: Creation and exchange of 3D models - Reamers for indexable inserts (ISO/TS 13399-312:2016, IDT)
- SS-EN-13481-4 - Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers in ballast
- SS-EN-14070 - Safety of machine tools - Transfer and special-purpose machines
- SS-EN-1601 - Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
- SS-EN-ISO-16089 - Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
- SS-EN-ISO-16090-1 - Machine tools safety - Machining centres, milling machines, transfer machines - Part 1: Safety requirements (ISO 16090-1:2022)
- SS-EN-ISO-16092-1 - Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
- SS-EN-ISO-16092-2 - Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)
- SS-EN-ISO-16092-4 - Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)
- SS-EN-ISO-16093 - Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
- SS-EN-ISO-23125 - Machine tools - Safety - Turning machines (ISO 23125:2015)
- SS-EN-ISO-23125-AM1 - Machine tools - Safety - Turning machines - Amendment 1 (ISO 23125:2010/Amd 1:2012)
- SS-EN-ISO-28881 - Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)
- SS-ISO-10649-2 - Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface (ISO 10649-2:2013, IDT)
- SS-ISO-10649-3 - Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer (ISO 10649-3:2013, IDT)
- SS-ISO-10649-4 - Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer (ISO 10649-4:2013, IDT)
- SS-ISO-13041-1 - Test conditions for numerically controlled turning machines and turning centres - Part 1: Geometric tests for machines with horizontal workholding spindle(s) (ISO 13041-1:2020, IDT)
- SS-ISO-14955-1 - Machine tools - Environmental evaluation of machine tools - Part 1: Design methodology for energy-efficient machine tools (ISO 14955-1, IDT)
- SS-ISO-14955-2 - Machine tools - Environmental evaluation of machine tools - Part 2: Methods for measuring energy supplied to machine tools and machine tool components (ISO 14955-2, IDT)
- SS-ISO-14955-3 - Machine tools - Environmental evaluation of machine tools - Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency (ISO 14955-3:2020, IDT)
- SS-ISO-14955-4 - Machine tools - Environmental evaluation of machine tools - Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency (ISO 14955-4:2019, IDT)
- SS-ISO-14955-5 - Machine tools - Environmental evaluation of machine tools - Part 5: Principles for testing woodworking machine tools with respect to energy supplied (ISO 14955-5:2020, IDT)
- SS-ISO-16084 - Balancing of rotating tools and tool systems (ISO 16084:2017, IDT)
- SS-ISO-16156 - Machine-tools safety - Safety requirements for the design and construction of work holding chucks (ISO 16156:2004, IDT)
- SS-ISO-230-1 - Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions (ISO 230-1:2012, IDT)
- SS-ISO-230-2 - Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes (ISO 230-2:2014, IDT)
- SS-ISO-230-2-AM1 - Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes - Amendment 1 (ISO 230-2:2014/Amd 1:2016, IDT)
- SS-ISO-230-3 - Test code for machine tools Part 3: Determination of thermal effects (ISO 230-3:2020, IDT)
- SS-ISO-230-5 - Test code for machine tools - Part 5: Determination of the noise emission
- SS-ISO-230-6 - Test code for machine tools - Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
- SS-ISO-230-7 - Test code for machine tools - Part 7: Geometric accuracy of axes of rotation (ISO 230-7:2006,IDT)
- SS-ISO-3365 - Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole - Dimensions (ISO 3365:2016, IDT)
- SS-ISO-369 - Machine tools - Symbols for indications appearing on machine tools (ISO 369:2009, IDT)
- SS-ISO-447 - Machine tool - Direction of operation of control
- SS-ISO-8525 - Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines (ISO 8525:2008, IDT)