Document Center List of Standards on Fluid Power Systems In General
ICS Code 23.100.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-2917 - Specification for graphical symbols used on diagrams for fluid power systems and components
- BS-2917-1 - Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols
- BS-7268 - Method of test for determination of fatigue pressure rating of metal pressure containing envelopes in hydraulic fluid power systems
- BS-7294 - Methods for determination of flow-rate characteristics of pneumatic fluid power components
- BS-7388 - Guide for prevention of leaks from hydraulic fluid power systems
- BS-EN-982 - Safety of Machinery. Safety Requirements for Fluid Power Systems and Their Components.
- BS-EN-ISO-4413 - Hydraulic fluid power. General rules and safety requirements for systems and their components
- BS-EN-ISO-4414 - Pneumatic fluid power. General rules and safety requirements for systems and their components
- BS-ISO-10771-1 - Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes
- BS-ISO-11943 - Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
- BS-ISO-1219-1 - Fluid power systems and components. Graphical symbols and circuit diagrams
- BS-ISO-1219-2 - Fluid power systems and components. Graphical symbols and circuit diagrams
- BS-ISO-1219-3 - Fluid power systems and components. Graphical symbols and circuit diagrams
- BS-ISO-15086-1 - Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems
- BS-ISO-15086-2 - Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems
- BS-ISO-15086-3 - Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems
- BS-ISO-18582-1 - Fluid power. Specification of reference dictionary
- BS-ISO-18582-2 - Fluid power. Specification of reference dictionary
- BS-ISO-18869 - Hydraulic fluid power. Test methods for couplings actuated with or without tools
- BS-ISO-18869-TC - Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools
- BS-ISO-19973-1 - Pneumatic fluid power. Assessment of component reliability by testing
- BS-ISO-19973-2 - Pneumatic fluid power. Assessment of component reliability by testing
- BS-ISO-19973-2-TC - Pneumatic fluid power. Assessment of component reliability by testing
- BS-ISO-19973-3 - Pneumatic fluid power. Assessment of component reliability by testing
- BS-ISO-19973-4 - Pneumatic fluid power. Assessment of component reliability by testing
- BS-ISO-19973-5 - Pneumatic fluid power. Assessment of component reliability by testing
- BS-ISO-2944 - Fluid power systems and components. Nominal pressures
- BS-ISO-5598 - Fluid power systems and components. Vocabulary
- BS-ISO-6072 - Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
- BS-ISO-6358-1 - Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids
- BS-ISO-6358-2 - Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids
- BS-ISO-6358-3 - Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids
- BS-ISO-9110-1 - Hydraulic fluid power. Measurement techniques
- BS-ISO-9110-2 - Hydraulic fluid power. Measurement techniques
- PD-ISO-10686 - Hydraulic fluid power. Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
- PD-ISO-16194 - Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures
- PD-ISO-19972-1 - Hydraulic fluid power. Methods to assess the reliability of hydraulic components
- PD-ISO-22165 - Pneumatic fluid power. Application notes for the improvement of the energy efficiency of pneumatic systems
ISO:
- ISO-10686 - Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
- ISO-1219-1 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications
- ISO-1219-1-AM1 - - Amendment 1
- ISO-1219-2 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams
- ISO-1219-3 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams
- ISO-14617-10 - Graphical symbols for diagrams - Part 10: Fluid power converters
- ISO-15086-1 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1: Introduction
- ISO-15086-2 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2: Measurement of the speed of sound in a fluid in a pipe
- ISO-15086-3 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 3: Measurement of hydraulic impedance
- ISO-16194 - Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures
- ISO-18582-1 - Fluid power - Specification of reference dictionary - Part 1: General overview on organization and structure
- ISO-18582-2 - Fluid power - Specification of reference dictionary - Part 2: Definitions of classes and properties of pneumatics
- ISO-18869 - Hydraulic fluid power - Test methods for couplings actuated with or without tools
- ISO-19972-1 - Hydraulic fluid power - Methods to assess the reliability of hydraulic components - Part 1: General procedures and calculation method
- ISO-19973-1 - Pneumatic fluid power - Assessment of component reliability by testing - Part 1: General procedures
- ISO-19973-2 - Pneumatic fluid power - Assessment of component reliability by testing - Part 2: Directional control valves
- ISO-19973-2-AM1 - - Amendment 1
- ISO-19973-3 - Pneumatic fluid power - Assessment of component reliability by testing - Part 3: Cylinders with piston rod
- ISO-19973-4 - Pneumatic fluid power - Assessment of component reliability by testing - Part 4: Pressure regulators
- ISO-19973-5 - Pneumatic fluid power - Assessment of component reliability by testing - Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
- ISO-22164 - Hydraulic fluid power - Application notes for the optimization of the energy efficiency of hydraulic systems
- ISO-22165 - Pneumatic fluid power - Application notes for the improvement of the energy efficiency of pneumatic systems
- ISO-2944 - Fluid power systems and components - Nominal pressures
- ISO-4413 - Hydraulic fluid power - General rules and safety requirements for systems and their components
- ISO-4414 - Pneumatic fluid power - General rules and safety requirements for systems and their components
- ISO-5352-1 - Hydraulic fluid power - Determination of discharge flow rate and thermal losses of gas loaded accumulators - Part 1: Test method
- ISO-5598 - Fluid power systems and components - Vocabulary
- ISO-5784-1 - Fluid power systems and components -- Fluid logic circuits -- Part 1 : Symbols for binary logic and related functions
- ISO-5784-2 - Fluid power systems and components -- Fluid logic circuits -- Part 2: Symbols for supply and exhausts as related to logic symbols
- ISO-5784-3 - Fluid power systems and components -- Fluid logic circuits -- Part 3: Symbols for logic sequencers and related functions
- ISO-6072 - Rubber - Compatibility between hydraulic fluids and standard elastomeric materials
- ISO-6358 - Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
- ISO-6358-1 - Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1: General rules and test methods for steady-state flow
- ISO-6358-1-AM1 - - Amendment 1: Effective conductance
- ISO-6358-2 - Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2: Alternative test methods
- ISO-6358-3 - Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 3: Method for calculating steady-state flow-rate characteristics of systems
- ISO-8778 - Pneumatic fluid power - Standard reference atmosphere
- ISO-9110-1 - Hydraulic fluid power - Measurement techniques - Part 1: General measurement principles
- ISO-9110-2 - Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit
- ISO/DIS-6358-2 - Part 2: General Rules, Pneumatic Fluid Power - Determination of Flow-Rate Characterist
- ISO/DIS-6358-3 - Part 3: Discharge Test as Alternate Test Method, Pneumatic Fluid Power - Determination
- ISO/DIS-6358-4 - Part 4: Charge Test as an Test Method, Pneumatic Fluid Power - Determination of Flow-R
Other SDOs:
- EN-ISO-4413 - Hydraulic fluid power - General rules and safety requirements for systems and their components
- JIS-B-0125-1 - Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 1: Graphic symbols for conventional use and data processing applications
- JIS-B-0125-2 - Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 2: Circuit diagrams
- SIS-ISO/TR-10686 - Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system (ISO/TR 10686:2013, IDT)
- SIS-ISO/TR-19972-1 - Hydraulic fluid power - Methods to assess the reliability of hydraulic components - Part 1: General procedures and calculation method (ISO/TR 19972-1:2009, IDT)
- SS-EN-982 - Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
- SS-EN-983 - Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
- SS-EN-ISO-4413 - Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
- SS-EN-ISO-4414 - Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
- SS-ISO-11926-1 - Connections for general use and fluid power - Ports and stud ends with ISO 263 UN and UNF threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 11926-1:1995, IDT)
- SS-ISO-11926-2 - Connections for general use and fluid power - Ports and stud ends with ISO 263 threads and O-ring sealing - Part 2 : Heavy-duty (S series) stud ends (ISO 11926-2:1995, IDT)
- SS-ISO-11926-3 - Connections for general use and fluid power - Ports and stud ends with ISO 263 inch threads and O-ring sealing - Part 3: Light-duty (L series) stud end (ISO 11926-3:1995, IDT)
- SS-ISO-1219-1 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications (ISO 1219-1:2012, IDT)
- SS-ISO-1219-1-AM1 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications - Amendment 1 (ISO 1219-1:2012/Amd 1:2016, IDT)
- SS-ISO-1219-2 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:2012, IDT)
- SS-ISO-1219-3 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams (ISO 1219-3:2016, IDT)
- SS-ISO-15086-1 - Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction
- SS-ISO-15086-2 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2: Measurement of the speed of sound in a fluid in a pipe
- SS-ISO-15086-3 - Hydraulic fluid power Determination of the fluid-borne noise characteristics of components and systems Part 3: Measurement of hydraulic impedance (15086-3:2022, IDT)
- SS-ISO-18869 - Hydraulic fluid power - Test methods for couplings actuated with or without tools (ISO 18869:2017, IDT)
- SS-ISO-19973-1 - Pneumatic fluid power - Assessment of component reliability by testing - Part 1: General procedures (ISO 19973-1:2015, IDT)
- SS-ISO-19973-2 - Pneumatic fluid power - Assessment of component reliability by testing - Part 2: Directional control valves (ISO 19973-2:2015, IDT)
- SS-ISO-19973-2-AM1 - Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves AMENDMENT 1 (ISO 19973-2:2015/Amd 1:2019, IDT)
- SS-ISO-19973-3 - Pneumatic fluid power - Assessment of component reliability by testing - Part 3: Cylinders with piston rod (ISO 19973-3:2015, IDT)
- SS-ISO-19973-4 - Pneumatic fluid power - Assessment of component reliability by testing - Part 4: Pressure regulators (revision of ISO 19973-4:2007) (ISO 19973-4:2014, IDT)
- SS-ISO-19973-5 - Pneumatic fluid power - Assessment of component reliability by testing - Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves (ISO 19973-5:2015, IDT)
- SS-ISO-2944 - Fluid power systems and components - Nominal pressures
- SS-ISO-4413 - Hydraulic fluid power - General rules relating to systems
- SS-ISO-4414 - Pneumatic fluid power - General rules relating to systems
- SS-ISO-5598 - Fluid power systems and components - Vocabulary (ISO 5598:2008, IDT)
- SS-ISO-6072 - Rubber - Compatibility between hydraulic fluids and standard elastomeric materials (ISO 6072:2011, IDT)
- SS-ISO-6358 - Pneumatic fluid power - Components using compressible fluids - Determination of flow-rate characteristics
- SS-ISO-8139 - Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes (ISO 8139:2018, IDT)
- SS-ISO-8140 - Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevises (ISO 8140:2018, IDT)
- SS-ISO-8778 - Pneumatic fluid power - Standard reference atmosphere
- SS-ISO-9110-1 - Hydraulic fluid power - Measurement techniques - Part 1: General measurement principles (ISO 9110-1:2020, IDT)
- SS-ISO-9110-2 - Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit (ISO 9110-2:2020, IDT)