Document Center List of Standards on Balancing And Balancing Machines
ICS Code 21.120.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-3852-1 - Balancing machines. Method of description and evaluation
- BS-6861-1 - Part 1: Method for Determination of Permissible Residual Unbalance - Balance Quality R
- BS-6861-2 - Mechanical vibration. Balance quality requirements of rigid rotors
- BS-7130 - Specification for mechanical balancing of rotating machinery: shaft and fitment key convention
- BS-7508 - Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
- BS-ISO-11342 - Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
- BS-ISO-16084 - Balancing of rotating tools and tool systems
- BS-ISO-1925 - Mechanical vibration. Balancing. Vocabulary
- BS-ISO-1940-1 - Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state
- BS-ISO-19499 - Mechanical vibration. Balancing. Guidance on the use and application of balancing standards
- BS-ISO-20806 - Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
- BS-ISO-21940-1 - Mechanical vibration — Rotor balancing Part 1: Introduction
- BS-ISO-21940-11 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-11-TC - Tracked Changes. Mechanical vibration. Rotor balancing
- BS-ISO-21940-12 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-12-TC - Tracked Changes. Mechanical vibration. Rotor balancing
- BS-ISO-21940-13 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-14 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-2 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-21 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-21-TC - Tracked Changes. Mechanical vibration. Rotor balancing
- BS-ISO-21940-23 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-2-TC - Tracked Changes. Mechanical vibration. Rotor balancing
- BS-ISO-21940-31 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-32 - Mechanical vibration. Rotor balancing
- BS-ISO-2953 - Mechanical vibration. Balancing machines. Description and evaluation
- BS-ISO-7475 - Mechanical vibration. Balancing machines. Enclosures and other protective measures for the measuring station
ISO:
- ISO-10814 - Mechanical vibration - Susceptibility and sensitivity of machines to unbalance
- ISO-11342 - Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors TECHNICAL CORRIGENDUM 1
- ISO-14694 - Industrial fans - Specifications for balance quality and vibration levels
- ISO-14694-AM1 - Industrial fans - Specifications for balance quality and vibration levels - Amendment 1
- ISO-16084 - Balancing of rotating tools and tool systems
- ISO-1925 - Mechanical vibration -- Balancing -- Vocabulary
- ISO-1940-1 - Mechanical vibration - Balance quality requirements of rigid rotors - Part 1: Determination of permissible residual unbalance - Corrigendum
- ISO-1940-2 - Mechanical vibration - Balance quality requirements of rigid rotors - Part 2: Balance errors
- ISO-19499 - Mechanical vibration - Balancing - Guidance on the use and application of balancing standards
- ISO-20806 - Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors
- ISO-21940-1 - Mechanical vibration - Rotor balancing - Part 1: Introduction
- ISO-21940-11 - Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour
- ISO-21940-11-AM1 - - Amendment 1: Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour - Amendment 1
- ISO-21940-12 - Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour
- ISO-21940-13 - Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
- ISO-21940-14 - Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors
- ISO-21940-14-AM1 - - Amendment 1: Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors - Amendment 1
- ISO-21940-2 - Mechanical vibration - Rotor balancing - Part 2: Vocabulary
- ISO-21940-21 - Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines
- ISO-21940-23 - Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines
- ISO-21940-31 - Mechanical vibration - Rotor balancing - Part 31: Susceptibility and sensitivity of machines to unbalance
- ISO-21940-32 - Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention
- ISO-2953 - Mechanical vibration -- Balancing machines -- Description and evaluation
- ISO-3719 - Mechanical vibration - Symbols for balancing machines and associated instrumentation
- ISO-7475 - Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station
- ISO-8821 - Mechanical vibration - Balancing - Shaft and fitment key convention
Other SDOs:
- DIN-ISO-1940-1 - Part 1: Specification and Verification of Balance Tolerances, Mechanical Vibration, Bal
- DIN-ISO-20806 - Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 20806:2009)
- DIN-ISO-7475 - Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station (ISO 7475:2002)
- JIS-B-0911 - Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance
- SS-EN-13560 - Surface active agents - Determination of amide nitrogen content - Potentiometric titration
- SS-EN-14598-2 - Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
- SS-EN-ISO-22867 - Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)
- SS-ISO-11342 - Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors
- SS-ISO-16084 - Balancing of rotating tools and tool systems (ISO 16084:2017, IDT)
- SS-ISO-1925 - Mechanical vibration - Balancing - Vocabulary
- SS-ISO-1925-AM1 - Mechanical vibration - Balancing - Vocabulary - Amendment 1
- SS-ISO-1940-1 - Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (ISO 1940-1:2003/Cor 1:2005, IDT)
- SS-ISO-1940-2 - Mechanical vibration - Balance quality requirements of rigid rotors - Part 2: Balance errors
- SS-ISO-19499 - Mechanical vibration - Balancing - Guidance on the use and application of balancing standards (ISO 19499:2007, IDT)
- SS-ISO-20806 - Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 20806:2009, IDT)
- SS-ISO-20816-1 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (ISO 20816-1:2016, IDT)
- SS-ISO-21940-1 - Mechanical vibration - Rotor balancing - Part 1: Introduction (ISO 21940-1:2019, IDT)
- SS-ISO-21940-11 - Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016, IDT)
- SS-ISO-21940-11-AM1 - Mechanical vibration Rotor balancing Part 11: Procedures and tolerances for rotors with rigid behaviour Amendment 1 (ISO 21940-11:2016/Amd 1:2022, IDT)
- SS-ISO-21940-12 - Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016, IDT)
- SS-ISO-21940-14 - Mechanical vibration - Rotor balancing - Part 14: Balance quality requirements of rigid rand flexible rotors - Balance errors (ISO 21940-14:2012, IDT)
- SS-ISO-21940-14-AM1 - Mechanical vibration Rotor balancing Part 14: Procedures for assessing balance errors Amendment 1 (ISO 21940-14:2012/Amd 1:2022, IDT)
- SS-ISO-21940-2 - Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017, IDT)
- SS-ISO-21940-21 - Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2022, IDT)
- SS-ISO-21940-32 - Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012, IDT)
- SS-ISO-2953 - Mechanical vibration - Balancing machines - Description and evaluation
- SS-ISO-7475 - Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station