Document Center List of Standards on Metric Screw Threads
ICS Code 21.040.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-1936-2 - Undercuts and runouts for screw threads
- BS-21 - Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
- BS-3643-1 - ISO metric screw threads
- BS-3643-2 - ISO metric screw threads
- BS-4185-10 - Machine tool components
- BS-4377 - Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
- BS-5346 - Specification. ISO metric trapezoidal screw threads
- BS-7751-1 - Prevailing torque type wire thread inserts
- BS-7751-2 - Prevailing torque type wire thread inserts
- BS-7752-1 - Free running type wire thread inserts
- BS-919-3 - Screw gauge limits and tolerances
- BS-EN-ISO-4753 - Fasteners. Ends of parts with external ISO metric thread
- BS-ISO-2901 - ISO metric trapezoidal screw threads. Basic and design profiles
- BS-ISO-2902 - ISO metric trapezoidal screw threads. General plan
- BS-ISO-2903 - ISO metric trapezoidal screw threads. Tolerances
- BS-ISO-68-1-TC - Tracked Changes. ISO general purpose screw threads. Basic and design profiles
- BS-ISO-724 - ISO general purpose metric screw threads. Basic dimensions
- BS-ISO-965-1 - ISO general purpose metric screw threads. Tolerances
- BS-ISO-965-3 - ISO general purpose metric screw threads. Tolerances
- BS-ISO-965-3-TC - Tracked Changes. ISO general purpose metric screw threads. Tolerances
- BS-ISO-965-4-TC - Tracked Changes. ISO general purpose metric screw threads. Tolerances
- PD-6507 - Guidance on metric screw threads and fasteners for use by model engineers
ISO:
- ISO-1502 - ISO general-purpose metric screw threads - Gauges and gauging
- ISO-261 - ISO general-purpose metric screw threads - General plan
- ISO-262 - ISO general purpose metric screw threads - Selected sizes for bolts, screws, studs and nuts
- ISO-2901 - ISO metric trapezoidal screw threads - Basic and design profiles
- ISO-2902 - ISO metric trapezoidal screw threads - General plan
- ISO-2903 - ISO metric trapezoidal screw threads - Tolerances
- ISO-2904 - ISO metric trapezoidal screw threads - Basic dimensions
- ISO-68-1 - ISO general purpose screw threads - Basic and design profiles - Part 1: Metric screw threads
- ISO-68-1-AM1 - - Amendment 1
- ISO-724 - ISO general purpose metric screw threads - Basic dimensions
- ISO-965-1 - ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
- ISO-965-1-AM1 - - Amendment 1: ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data - Amendment 1
- ISO-965-2 - ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
- ISO-965-2-AM1 - - Amendment 1
- ISO-965-3 - ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads
- ISO-965-4 - ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- ISO-965-5 - ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for hot-dip galvanized internal screw threads to mate with external threads with maximum size of tolerance position h before galvanizing
- ISO-965-5-AM1 - - Amendment 1
Other SDOs:
- DIN-13-21 - ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
- DIN-13-22 - ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
- DIN-13-23 - ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm
- DIN-13-24 - ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm
- DIN-13-25 - ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm
- DIN-13-26 - ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
- DIN-13-51 - ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
- DIN-76-1 - Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
- DIN-976-1 - Fasteners - Stud bolts - Part 1: Metric thread
- EN-ISO-11381 - Ophthalmic optics - Spectacle frames - Screw threads
- JIS-B-0205-1 - ISO general purpose metric screw threads -- Part 1: Basic profile
- JIS-B-0205-2 - ISO general purpose metric screw threads -- Part 2: General plan
- JIS-B-0205-3 - ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts
- JIS-B-0205-4 - ISO general purpose metric screw threads -- Part 4: Basic dimensions
- JIS-B-0209-1 - ISO general purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data
- JIS-B-0209-2 - ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
- JIS-B-0209-3 - ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
- JIS-B-0209-4 - ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- JIS-B-0209-5 - ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- JIS-B-0251 - Limit gauges for metric screw threads
- SS-3193 - ISO general purpose metric screw threads - Hot dip galvanizing of external screw threads - Tolerances and limits of sizes
- SS-EN-14382 - Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
- SS-EN-1996-2 - Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
- SS-EN-3960 - Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste
- SS-EN-ISO-11381 - Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016)
- SS-EN-ISO-8673 - Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)
- SS-EN-ISO-8675 - Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)
- SS-ISO-1501 - ISO miniature screw threads (ISO 1501:2009, IDT)
- SS-ISO-261 - ISO general purpose metric screw threads - General plan
- SS-ISO-262 - ISO general purpose metric screw threads Selected sizes for bolts, screws, studs and nuts (ISO 262:2023, IDT)
- SS-ISO-2901 - ISO metric trapezoidal screw threads - Basic and design profiles (ISO 2901:2016, IDT)
- SS-ISO-2902 - ISO metric trapezoidal screw threads - General plan (ISO 2902:2016, IDT)
- SS-ISO-2903 - ISO metric trapezoidal screw threads - Tolerances (ISO 2903:2016, IDT)
- SS-ISO-2904 - ISO metric trapezoidal screw threads - Basic dimensions (ISO 2904:2020, IDT)
- SS-ISO-3508 - Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
- SS-ISO-4755 - Fasteners - Thread undercuts for external metric ISO threads
- SS-ISO-5855-1 - Aerospace - MJ threads - Part 1: General requirements
- SS-ISO-5855-2 - Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts
- SS-ISO-5855-3 - Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluids systems
- SS-ISO-6410-1 - Technical drawings - Screw threads and threaded parts - Part 1: General conventions
- SS-ISO-6410-3 - Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation
- SS-ISO-68-1 - ISO general purpose screw threads Basic and design profiles Part 1: Metric screw threads (ISO 68-1:2023, IDT)
- SS-ISO-68-1-AM1 - ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads- Amendment 1 (ISO 68-1:1998/Amd 1:2020, IDT)
- SS-ISO-724 - ISO general purpose metric screw threads Basic dimensions (ISO 724:2023; IDT)
- SS-ISO-965-1 - ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013, IDT)
- SS-ISO-965-1-AM1 - ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data Amendment 1 (ISO 965-1:2013/Amd 1:2021, IDT)
- SS-ISO-965-2 - ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
- SS-ISO-965-2-AM1 - ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium quality Amendment 1 (ISO 965-2:1998/Amd 1:2021, IDT)
- SS-ISO 965-3 - ISO general purpose metric screw threads Tolerances Part 3: Limit deviations for screw threads (ISO 965-3:2021, IDT)
- SS-ISO-965-3 - ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
- SS-ISO 965-4 - ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:2021, IDT)
- SS-ISO-965-4 - ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- SS-ISO-965-5 - ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- SS-ISO-965-5-AM1 - ISO general purpose metric screw threads Tolerances Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing Amendment 1 (ISO 965-5:1998/Amd 1:2021, IDT)
- UNE-EN-ISO-11381 - Ophthalmic optics - Spectacle frames - Screw threads