Document Center List of Standards on Noise Emitted By Machines And Equipment Standards Included In This Group Shall Also Be Included In Other Groups And/Or Sub-Groups According To Their Subject
ICS Code 17.140.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E1067 - Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
- ASTM-E1222 - Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
- ASTM-E1888 - Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
- ASTM-E2459 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
- ASTM-E2598 - Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
- ASTM-E2863 - Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
- ASTM-E2907 - Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
- ASTM-E2963 - Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments
- ASTM-E596 - Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM-E749 - Standard Practice for Acoustic Emission Monitoring During Continuous Welding
- ASTM-E750 - Standard Practice for Characterizing Acoustic Emission Instrumentation
- ASTM-E751 - Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
- ASTM-F1334 - Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
- ASTM-F1797 - Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks
- ASTM-F2544 - Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
- ASTM-F914 - Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
BSI:
- BS-4142 - Methods for rating and assessing industrial and commercial sound
- BS-4856-4 - Methods for testing and rating fan coil units, unit heaters and unit coolers
- BS-4857-2 - Methods for testing and rating terminal reheat units for air distribution systems
- BS-5228-1 - Code of practice for noise and vibration control on construction and open sites
- BS-5228-3 - Code of Practice Applicable To Surface Coal Extraction by Opencast Methods
- BS-5228-4 - Code of Practice for Noise & Vibration Control Applicable To Piling Operations
- BS-5228-5 - Noise & Vibration Control on Construction & Open Sites, Code of Practice Applicable To
- BS-5944-1 - Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for pumps
- BS-5944-2 - Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for motors
- BS-5944-4 - Measurement of airborne noise from hydraulic fluid power systems and components
- BS-5944-5 - Measurement of airborne noise from hydraulic fluid power systems and components
- BS-6686-2-2.1 - Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Vacuum cleaners
- BS-6686-2-2.3 - Methods for Determination of Airborne Acoustical Noise Emitted by Household & Similar
- BS-6812-3 - Method of Measurement of Exterior Noise in Dynamic Test Conditions
- BS-6916-6 - Chain Saws, Method of Measurement of Airborne Noise at the Operator's Position
- BS-7135-2 - Noise emitted by computer and business equipment. Method of measurement of high-frequency noise
- BS-7135-3 - Noise emitted by computer and business equipment. Method for determining and verifying declared noise emission values
- BS-7136-1 - Brush Saws, Method of Measurement at the Operator's Position of Emitted Airborne Noise
- BS-848-2 - Fans for General Purposes, Methods of Noise Testing
- BS-848-2.6 - Fans for General Purposes, Methods of Noise Testing, Airborne Noise Emitted by Small A
- BS-EN-12102 - Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level
- BS-EN-12102-1 - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors. Determination of the sound power level
- BS-EN-12102-1-TC - Tracked Changes. Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors. Determination of the sound power level
- BS-EN-12102-2 - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors. Determination of the sound power level
- BS-EN-12545 - Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements
- BS-EN-12549 - Acoustics. Noise test code for fastener driving tools. Engineering method
- BS-EN-12639 - Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
- BS-EN-1265 - Safety of machinery. Noise test code for foundry machines and equipment
- BS-EN-13023 - Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
- BS-EN-14366 - Laboratory measurement of noise from waste water installations
- BS-EN-14366-1 - Laboratory measurement of airborne and structure-borne sound from service equipment
- BS-EN-14366-1-TC - Tracked Changes. Laboratory measurement of airborne and structure-borne sound from service equipment
- BS-EN-14462 - Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
- BS-EN-14462-TC - Tracked Changes. Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
- BS-EN-14584 - Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources
- BS-EN-15036-1 - Heating boilers. Test regulations for airborne noise emissions from heat generators
- BS-EN-15036-2 - Heating boilers. Test regulations for airborne noise emissions from heat generators
- BS-EN-1547 - Industrial thermoprocessing equipment. Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
- BS-EN-28960 - Refrigerators, frozen food storage cabinets and food freezers for household and similar use. Measurement of emission of airborne acoustical noise
- BS-EN-415-9 - Safety of packaging machines
- BS-EN-60034-9 - Rotating electrical machines
- BS-EN-60534-8-1 - Industrial-process control valves
- BS-EN-60534-8-2 - Industrial-process control valves
- BS-EN-60534-8-3 - Industrial-process control valves
- BS-EN-60534-8-4 - Industrial-process control valves
- BS-EN-60534-8-4-TC - Tracked Changes. Industrial-process control valves
- BS-EN-60704-1 - Fibre optic sensors
- BS-EN-60704-2-1 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-10 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-13 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-14 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-14-TC - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-2 - Household and similar appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-3 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-5 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-6 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-8 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-2-9 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-60704-3 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-1 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-1 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-13 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-13-TC - Tracked Changes. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-16 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-17 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-18 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-2 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-2-TC - Tracked Changes. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-7 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-IEC-60704-2-8 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- BS-EN-ISO-10052 - Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method
- BS-EN-ISO-10052-TC - Tracked Changes. Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method
- BS-EN-ISO-11200 - Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
- BS-EN-ISO-11201 - Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
- BS-EN-ISO-11202 - Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
- BS-EN-ISO-11203 - Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
- BS-EN-ISO-11204 - Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
- BS-EN-ISO-11205 - Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
- BS-EN-ISO-11688-1 - Acoustics. Recommended practice for the design of low-noise machinery and equipment
- BS-EN-ISO-11688-2 - Acoustics. Recommended practice for the design of low-noise machinery and equipment
- BS-EN-ISO-11689 - Acoustics. Procedure for the comparison of noise-emission data for machinery and equipment
- BS-EN-ISO-11691 - Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
- BS-EN-ISO-12001 - Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
- BS-EN-ISO-14257 - Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
- BS-EN-ISO-15744 - Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
- BS-EN-ISO-16032-TC - Tracked Changes. Acoustics. Measurement of sound pressure level from service equipment or activities in buildings. Engineering method
- BS-EN-ISO-1680 - Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines
- BS-EN-ISO-17201-1 - Acoustics. Noise from shooting ranges
- BS-EN-ISO-17201-2 - Acoustics. Noise from shooting ranges
- BS-EN-ISO-17201-3 - Acoustics. Noise from shooting ranges
- BS-EN-ISO-17201-4 - Acoustics. Noise from shooting ranges
- BS-EN-ISO-17201-5 - Acoustics. Noise from shooting ranges
- BS-EN-ISO-17201-6 - Acoustics. Noise from shooting ranges
- BS-EN-ISO-20361 - Liquid pumps and pumps units. Noise test code. Grades 2 and 3 of accuracy
- BS-EN-ISO-2151 - Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2)
- BS-EN-ISO-22868 - Forestry and gardening machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
- BS-EN-ISO-22868-TC - Tracked Changes. Forestry and gardening machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
- BS-EN-ISO-23771 - Textile machinery. Guide to the design of textile machinery for reduction of the noise emissions
- BS-EN-ISO-3740 - Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards
- BS-EN-ISO-3822-1 - Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations
- BS-EN-ISO-3822-3 - Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations
- BS-EN-ISO-3822-4 - Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations
- BS-EN-ISO-4871 - Acoustics. Declaration and verification of noise emission values of machinery and equipment
- BS-EN-ISO-5136 - Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
- BS-EN-ISO-7779 - Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment
- BS-EN-ISO-7779-TC - Tracked Changes. Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment
- BS-EN-ISO-8528-10 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-EN-ISO-8528-10-TC - Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets
- BS-EN-ISO-9295 - Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment
- BS-EN-ISO-9612 - Acoustics. Determination of occupational noise exposure. Engineering method
- BS-EN-ISO-9902-1 - Textile machinery. Noise test code
- BS-EN-ISO-9902-2 - Textile machinery. Noise test code
- BS-EN-ISO-9902-3 - Textile machinery. Noise test code
- BS-EN-ISO-9902-4 - Textile machinery. Noise test code
- BS-EN-ISO-9902-5 - Textile machinery. Noise test code
- BS-EN-ISO-9902-6 - Textile machinery. Noise test code
- BS-EN-ISO-9902-7 - Textile machinery. Noise test code
- BS-IEC-60704-2-13 - BS EN 60704-2-13 Ed 3.0 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise. Part 2-13: Particular requirements for range hoods and other fume extractors
- BS-ISO-10302-1-TC - Tracked Changes. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
- BS-ISO-10302-2 - Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
- BS-ISO-10884 - Manually portable brush-cutters and grass trimmers with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
- BS-ISO-13332 - Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
- BS-ISO-13347-1 - Industrial fans. Determination of fan sound power levels under standardized laboratory conditions.
- BS-ISO-13347-3 - Industrial fans. Determination of fan sound power levels under standardized laboratory conditions
- BS-ISO-13347-4 - Industrial fans. Determination of fan sound power levels under standardized laboratory conditions
- BS-ISO-13475-1 - Acoustics. Stationary audible warning devices used outdoors
- BS-ISO-15086-1 - Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems
- BS-ISO-15086-2 - Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems
- BS-ISO-15664 - Acoustics. Noise control design procedures for open plant
- BS-ISO-15665-TC - Tracked Changes. Acoustics. Acoustic insulation for pipes, valves and flanges
- BS-ISO-18564 - Machinery for forestry. Noise test code
- BS-ISO-20270 - Acoustics. Characterization of sources of structure-borne sound and vibration. Indirect measurement of blocked forces
- BS-ISO-21131 - Ships and marine technology. Marine cranes. Noise limits and measuring method
- BS-ISO-21955 - Acoustics. Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure
- BS-ISO-22096 - Condition monitoring and diagnostics of machines. Acoustic emission
- BS-ISO-230-5 - Test code for machine tools
- BS-ISO-27327-2 - Fans. Air curtain units
- BS-ISO-5131 - Tractors for agriculture and forestry. Measurement of noise at the operators position. Survey method
- BS-ISO-6393 - Earth-moving machinery. Determination of sound power level noise emissions. Stationary test conditions
- BS-ISO-6394 - Earth-moving machinery. Determination of emission sound pressure level at operator's position. Stationary test conditions
- BS-ISO-6395 - Earth-moving machinery. Determination of sound power level. Dynamic test conditions
- BS-ISO-6396 - Earth-moving machinery. Determination of emission sound pressure level at operator's position. Dynamic test conditions
- BS-ISO-6798-1 - Reciprocating internal combustion engines. Measurement of sound power level using sound pressure
- BS-ISO-6798-2 - Reciprocating internal combustion engines. Measurement of sound power level using sound pressure
- BS-ISO-6798-3 - Reciprocating internal combustion engines. Measurement of sound power level using sound pressure
- BS-ISO-7216 - Agricultural and forestry tractors. Measurement of noise emitted when in motion
- BS-ISO-8525 - Airborne noise emitted by machine tools. Operating conditions for metal-cutting machines
- BS-ISO-8579-1 - Acceptance code for gear units
- BS-ISO-9207 - Manually portable chain-saws with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
- BS-ISO-9296 - Acoustics. Declared noise emission values of information technology and telecommunications equipment
- BS-ISO-9902 - Textile machinery acoustics. Determination of sound pressure levels and sound power levels emitted by textile machines. Engineering and survey methods
- BS-ISO-9920 - Ergonomics of the Thermal Environment. Estimation of the Thermal Insulation and Evapor
- DD-ENV-12102 - Air conditioners, heat pumps and dehumidifiers with electrically driven compressors. Measurement of airborne noise. Determination of the sound power level
- DD-IEC/PAS-60704-2-15 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- DD-IEC/PAS60704-2-15 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- DD-ISO-7849-1 - Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement
- DD-ISO-7849-2 - Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement
- ISO-6798-1 FRENCH - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 1: Engineering method [Standard in French]
- PD-CEN-15068 - Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method
- PD-CEN-ISO-7849-1 - Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement
- PD-CEN-ISO-7849-2 - Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement
IEC:
- IEC-1063 - Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery
- IEC-60534-8-1 - Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
- IEC-60534-8-2 - Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
- IEC-60534-8-3 - Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
- IEC-60534-8-4 - Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
- IEC-60704-2-1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
- IEC-60704-2-10 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens
- IEC-60704-2-10-EXV - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens
- IEC-60704-2-11 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically-operated food preparation
- IEC-60704-2-13 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for cooking fume extractors
- IEC-60704-2-13-1 - Amendment 1: Household & Similar Electrical Appliances - Test Code for the Determinati
- IEC-60704-2-13-2 - Amendment 2: Household & Similar Electrical Appliances - Test Code for the Determinati
- IEC-60704-2-14 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
- IEC-60704-2-14-AM1 - Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
- IEC-60704-2-14-AM2 - Amendment 2 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
- IEC-60704-2-15 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-15: Particular requirements for household food waste disposers
- IEC-60704-2-15-EXV - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-15: Particular requirements for household food waste disposers
- IEC-60704-2-16 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-16: Particular requirements for washer-dryers
- IEC-60704-2-17 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for dry-cleaning robots
- IEC-60704-2-18 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-18: Particular requirements for electric water heaters
- IEC-60704-2-1-RL - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
- IEC-60704-2-2 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters
- IEC-60704-2-2-EXV - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters
- IEC-60704-2-3 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
- IEC-60704-2-3-1 - Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
- IEC-60704-2-4 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors
- IEC-60704-2-5 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters
- IEC-60704-2-5-AM1 - Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters
- IEC-60704-2-6 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers
- IEC-60704-2-7 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans
- IEC-60704-2-7-RL - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans
- IEC-60704-2-8 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for electric shavers
- IEC-60704-2-8-RL - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers
- IEC-60704-2-9 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances
- IEC-60704-3 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
- IEC-60704-3-RL - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
ISO:
- ISO-10052 - Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method
- ISO-10052-A1 - Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1
- ISO-10302 - Acoustics - Method for the measurement of airborne noise emitted by small air-moving devices
- ISO-10302-1 - Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 1: Airborne noise measurement
- ISO-10302-2 - Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 2: Structure-borne vibration measurements
- ISO-10494 - Turbines and turbine sets - Measurement of emitted airborne noise - Engineering/survey method
- ISO-10843 - Acoustics - Methods for the description and physical measurement of single impulses or series of impulses
- ISO-11094 - Acoustics - Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments
- ISO-11200 - Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
- ISO-11200-AM1 - - Amendment 1
- ISO-11201 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
- ISO-11202 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
- ISO-11202-AM1 - - Amendment 1
- ISO-11203 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
- ISO-11203-AM1 - - Amendment 1
- ISO-11204 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
- ISO-11688-1 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning
- ISO-11688-2 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design
- ISO-11689 - Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment
- ISO-12001 - Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code
- ISO-13261-1 - Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment
- ISO-13261-2 - Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment
- ISO-13332 - Reciprocating internal combustion engines -- Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
- ISO-13347-1 - Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview
- ISO-13347-1-AM1 - Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview - Amendment 1
- ISO-13347-2 - Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: Reverberant room method
- ISO-13347-3 - Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods
- ISO-13347-3-AM1 - Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods
- ISO-13347-4 - Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 4: Sound intensity method
- ISO-13475-1 - Acoustics -- Stationary audible warning devices used outdoors -- Part 1: Field measurements for determination of sound emission quantities
- ISO-13475-2 - Acoustics -- Stationary audible warning devices used outdoors -- Part 2: Precision methods for determination of sound emission quantities
- ISO-15086-1 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1: Introduction
- ISO-15086-2 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2: Measurement of the speed of sound in a fluid in a pipe
- ISO-15086-3 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 3: Measurement of hydraulic impedance
- ISO-15664 - Acoustics -- Noise control design procedures for open plant
- ISO-15665 - Acoustics - Acoustic insulation for pipes, valves and flanges
- ISO-15744 - Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)
- ISO-16032 - Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method
- ISO-1680 - Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines
- ISO-16902-1 - Hydraulic fluid power - Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method - Part 1: Pumps
- ISO-17201-1 - Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement
- ISO-17201-2 - Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation
- ISO-17201-3 - Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations
- ISO-17201-4 - Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound
- ISO-17201-5 - Acoustics - Noise from shooting ranges - Part 5: Noise management
- ISO-17201-6 - Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound
- ISO-18564 - Machinery for forestry - Noise test code
- ISO-20270 - Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces
- ISO-20361 - Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy
- ISO-20361-RL - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (includes Redline Version)
- ISO-21131 - Ships and marine technology - Marine cranes - Noise limits and measuring method
- ISO-2151 - Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)
- ISO-21955 - Acoustics - Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure
- ISO-22096 - Condition monitoring and diagnostics of machines - Acoustic emission
- ISO-22520 - Portable hand-held forestry machines - A-weighted emission sound pressure levels at the operators station - Comparative data in 2002
- ISO-22868 - Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
- ISO-230-5 - Test code for machine tools -- Part 5: Determination of the noise emission
- ISO-23771 - Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions
- ISO-27327-2 - Fans - Air curtain units - Part 2: Laboratory methods of testing for sound power
- ISO-3822-1 - Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement
- ISO-3822-1-1 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty
- ISO-3822-2 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves
- ISO-3822-3 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
- ISO-3822-3/A1 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1
- ISO-3822-4 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
- ISO-4412-1 - Hydraulic fluid power - Test code for determination of airborne noise levels - Part 1: Pumps
- ISO-4412-2 - Hydraulic fluid power - Test code for determination of airborne noise levels - Part 2: Motors
- ISO-4412-3 - Hydraulic fluid power - Test code for determination of airborne noise levels - Part 3: Pumps - Method using a parallelepiped microphone array
- ISO-4871 - Acoustics -- Declaration and verification of noise emission values of machinery and equipment
- ISO-4872 - Acoustics - Measurement of Airborne Noise Emitted by Construction Equipment Intended for O
- ISO-5131 - Tractors for agriculture and forestry - Measurement of noise at the operators position - Survey method
- ISO-5135 - Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room
- ISO-5136 - Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method
- ISO-6393 - Earth-moving machinery - Determination of sound power level - Stationary test conditions
- ISO-6394 - Earth-moving machinery - Determination of emission sound pressure level at operators position - Stationary test conditions
- ISO-6395 - Earth-moving machinery - Determination of sound power level - Dynamic test conditions
- ISO-6395-1 - Amendment 1 to ISO 6395:1988
- ISO-6395 FRENCH - Earth-moving machinery - Determination of sound power level - Dynamic test conditions [Standard in French]
- ISO-6396 - Earth-moving machinery - Determination of emission sound pressure level at operators position - Dynamic test conditions
- ISO-6798 - Reciprocating internal combustion engines -- Measurement of emitted airborne noise -- Engineering method and survey method
- ISO-6798-1 - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 1: Engineering method
- ISO-6798-2 - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 2: Survey method
- ISO-6798-3 - Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 3: Survey method for use in situ
- ISO-7216 - Agricultural and forestry tractors - Measurement of noise emitted when in motion
- ISO-7447 - Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving - In situ determination of the insertion loss of barrier control measures underwater
- ISO-7574-1 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1 : General considerations and definitions
- ISO-7574-2 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2 : Methods for stated values for individual machines
- ISO-7574-3 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3 : Simple (transition) method for stated values for batches of machines
- ISO-7574-4 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4 : Methods for stated values for batches of machines
- ISO-7779 - Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
- ISO-7849-1 - Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor
- ISO-7849-2 - Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor
- ISO-7960 - Airborne noise emitted by machine tools - Operating conditions for woodworking machines
- ISO-8297 - Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method
- ISO-8297-AM1 - - Amendment 1
- ISO-8525 - Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines
- ISO-8528-10 - Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise
- ISO-8579-1 - Acceptance code for gear units - Part 1: Test code for airborne sound
- ISO-9295 - Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
- ISO-9296 - Acoustics - Declared noise emission values of information technology and telecommunications equipment
- ISO-9568 - Cinematography - Background acoustic noise levels in theatres, review rooms and dubbing rooms
- ISO-9611 - Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted
- ISO-9902-1 - Textile machinery -- Noise test code -- Part 1: Common requirements
- ISO-9902-1-1 - Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1
- ISO-9902-1-2 - - Amendment 2
- ISO-9902-2 - Textile machinery -- Noise test code -- Part 2: Spinning preparatory and spinning machinery
- ISO-9902-2-1 - Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 1
- ISO-9902-2-2 - - Amendment 2
- ISO-9902-3 - Textile machinery -- Noise test code -- Part 3: Nonwoven machinery
- ISO-9902-3-1 - Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 1
- ISO-9902-3-2 - - Amendment 2
- ISO-9902-4 - Textile machinery -- Noise test code -- Part 4: Yarn processing, cordage and rope manufacturing machinery
- ISO-9902-4-1 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1
- ISO-9902-4-2 - - Amendment 2
- ISO-9902-5 - Textile machinery -- Noise test code -- Part 5: Weaving and knitting preparatory machinery
- ISO-9902-5-1 - Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery - Amendment 1
- ISO-9902-5-2 - - Amendment 2
- ISO-9902-6 - Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery
- ISO-9902-6-1 - Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery - Amendment 1
- ISO-9902-6-2 - - Amendment 2
- ISO-9902-7 - Textile machinery -- Noise test code -- Part 7: Dyeing and finishing machinery
- ISO-9902-7-1 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery - Amendment 1
- ISO-9902-7-2 - - Amendment 2
Other SDOs:
- BS-IEC-60704-2-15 - Household and similar electrical appliances. Test code for the determination of airborne acoustical noise
- DIN-EN-13023 - Noise Measurement Methods for Printing, Paper Converting, Paper Making Machines and Auxi
- DIN-EN-14366 - Laboratory Measurement of Noise From Waste Water Installations
- DIN-EN-14462 - Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; German version EN 14462:2015
- DIN-EN-14584 - Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2013
- DIN-EN-15036-1 - Part 1: Airborne Noise Emissions From Heat Generators, Heating Boilers - Test Regulati
- DIN-EN-15036-2 - Part 2: Flue Gas Noise Emissions at the Outlet of the Heat Generator, Heating Boilers
- DIN-EN-1915-4 - Part 4: Noise Measurement Methods & Reduction, Aircraft Ground Support Equipment - Gen
- DIN-EN-ISO-10052 - Acoustics - Field Measurements of Airborne & Impact Sound Insulation & of Service Equi
- DIN-EN-ISO-11205 - Acoustics - Noise Emitted by Machinery & Equipment, Engineering Method for the Determi
- DIN-EN-ISO-11904-2 - Part 2: Technique Using a Manikin, Acoustics, Determination of Sound Immission From S
- DIN-EN-ISO-15744 - Hand-Held Non-Electric Power Tools, Noise Measurement Code - Engineering Method (Grade
- DIN-EN-ISO-16032 - Acoustics, Measurement of Sound Pressure Level From Service Equipment in Buildings, E
- DIN-EN-ISO-17201-1 - Part 1: Determination of Muzzle Blast by Measurement, Acoustics - Noise From Shooting
- DIN-EN-ISO-17201-2 - Part 2: Estimation of Muzzle Blast & Projectile Sound by Calculation, Acoustics - Nois
- DIN-EN-ISO-17201-4 - Part 4: Prediction of Projectile Sound, Acoustics - Noise From Shooting Ranges
- DIN-EN-ISO-2151 - Acoustics - Noise Test Code for Compressors & Vacuum Pumps - Engineering Method (Grade
- DIN-EN-ISO-22868 - Forestry & Garden Machinery - Noise Test Code for Portable Hand-Held Machines With Int
- DIN-EN-ISO-5136 - Acoustics - Determination of Sound Power Radiated Into a Duct by Fans & Other Air-Movi
- DIN-EN-ISO-7779 - Acoustics - Measurement of Airborne Noise Emitted by Information Technology & Telecomm
- DIN-ISO-230-5 - Part 5: Determination of the Noise Emission, Test Code for Machine Tools
- EN-12102-2 - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters
- EN-12545 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines - Noise Test Code -
- EN-12549 - Acoustics - Noise Test Code for Fastener Driving Tools - Engineering Method
- EN-13023 - Noise Measurement Methods for Printing, Paper Converting, Paper Making Machines & Auxi
- EN-14366 - Laboratory Measurement of Noise From Waste Water Installations
- EN-14462 - Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
- EN-14584 - Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
- EN-15036-1 - Part 1: Airborne Noise Emissions From Heat Generators, Heating Boilers - Test Regulati
- EN-15036-2 - Part 2: Flue Gas Noise Emissions at the Outlet of the Heat Generator, Heating Boilers
- EN-1547 - Industrial Thermoprocessing Equipment - Noise Test Code for Industrial Thermoprocessi
- EN-1915-4 - Part 4: Noise Measurement Methods & Reduction, Aircraft Ground Support Equipment, Gene
- EN-415-9 - Part 9: Noise Measurement Methods for Packaging Machines, Packaging Lines & Associated
- EN-60534-8-1 - Industrial-Process Control Valves, Noise Considerations, Laboratory Measurement of Noi
- EN-60534-8-2 - Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
- EN-60534-8-3 - Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
- EN-60534-8-4 - Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
- EN-60704-2-1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners
- EN-60704-2-10 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
- EN-60704-2-13 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other cooking fume extractors
- EN-60704-2-14 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
- EN-60704-2-2 - Part 2-2: Particular Requirements for Fan Heaters, Household & Similar Appliances - Te
- EN-60704-2-4 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors
- EN-60704-2-5 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters
- EN-60704-2-6 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers
- EN-60704-2-9 - Household & Similar Electrical Appliances, Test Code for the Determination of Airborne
- EN-IEC-60704-2-16 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-16: Particular requirements for washer-dryers (IEC 60704-2-16:2019)
- EN-ISO-10052 - Acoustics - Field Measurements of Airborne & Impact Sound Insulation & of Service Equi
- EN-ISO-11200 - Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
- EN-ISO-11201 - Acoustics - Noise Emitted by Machinery & Equipment - Determination of Emission Sound P
- EN-ISO-11202 - Acoustics - Noise Emitted by Machinery & Equipment - Determination of Emission Sound P
- EN-ISO-11203 - Acoustics, Noise Emitted by Machinery & Equipment, Determination of Emission Sound Pre
- EN-ISO-11204 - Acoustics - Noise Emitted by Machinery & Equipment - Determination of Emission Sound P
- EN-ISO-11205 - Acoustics, Noise Emitted by Machinery & Equipment, Engineering Method for the Determin
- EN-ISO-11688-1 - Acoustics, Recommended Practice for the Design of Low-Noise Machinery & Equipment, Pl
- EN-ISO-11688-2 - Part 2: Introduction To the Physics of Low-Noise Design, Recommended Practice for The
- EN-ISO-11689 - Acoustics - Procedure for the Comparison of Noise Emission-Data for Machinery & Equipm
- EN-ISO-11691 - Acoustics, Measurement of Insertion Loss of Ducted Silencers Without Flow, Laboratory
- EN-ISO-12001 - Acoustics, Noise Emitted by Machinery & Equipment, Rules for the Drafting & Presentati
- EN-ISO-15744 - Hand-Held Non-Electric Power Tools, Noise Measurement Code, Engineering Method (Grade
- EN-ISO-16032 - Acoustics, Measurement of Sound Pressure Level From Service Equipment in Buildings, E
- EN-ISO-1680 - Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
- EN-ISO-17201-1 - Part 1: Determination of Muzzle Blast by Measurement, Acoustics - Noise From Shooting
- EN-ISO-17201-2 - Part 2: Estimation of Muzzle Blast & Projectile Sound by Calculation, Acoustics - Nois
- EN-ISO-17201-3 - Part 3: Guidelines for Sound Propagation Calculations, Acoustics - Noise From Shooting
- EN-ISO-17201-4 - Part 4: Prediction of Projectile Sound, Acoustics - Noise From Shooting Ranges
- EN-ISO-17201-5 - Part 5: Noise Management, Acoustics - Noise From Shooting Ranges
- EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy
- EN-ISO-2151 - Acoustics - Noise Test Code for Compressors & Vacuum Pumps - Engineering Method (Grade
- EN-ISO-22868 - Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
- EN-ISO-23771 - Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions
- EN-ISO-3822-3 - Part 3: Mounting & Operating Conditions for In-Line Valves & Appliances, Acoustics - L
- EN-ISO-3822-4 - Acoustics, Laboratory Tests on Noise Emission From Appliances & Equipment Used in Wate
- EN-ISO-4871 - Acoustics, Declaration & Verification of Noise Emission Values of Machinery & Equipmen
- EN-ISO-5136 - Acoustics, Determination of Sound Power Radiated Into a Duct by Fans & Other Air-Movin
- EN-ISO-7779 - Acoustics - Measurement of Airborne Noise Emitted by Information Technology & Telecomm
- EN-ISO-9295 - Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
- EN-ISO-9612 - Acoustics - Determination of Occupational Noise Exposure - Engineering Method
- EN-ISO-9902-1 - Textile machinery - Noise test code - Part 1: Common requirements - Amendment 2
- EN-ISO-9902-2 - Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 2 (ISO 9902-2:2001/Amd 2:2014)
- EN-ISO-9902-3 - Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2
- EN-ISO-9902-4 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2
- EN-ISO-9902-5 - Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery
- EN-ISO-9902-6 - Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery
- EN-ISO-9902-7 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery
- JIS-B-1753 - Acceptance code for gear units -- Test code for airborne sound
- SIS-141365 - Steel for tensional strapping
- SIS-CEN-ISO/TS-7849-1 - Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009)
- SIS-CEN-ISO/TS-7849-2 - Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009)
- SIS-ISO/TS-13475-2 - Acoustics - Stationary audible warning devices used outdoors - Part 2: Precision methods for determination of sound emission quantities (ISO/TS 13475-2:2000, IDT)
- SIS-ISO/TS-7849-1 - Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009, IDT)
- SIS-ISO/TS-7849-2 - Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009, IDT)
- SS-EN-12102 - Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
- SS-EN-12102-1 - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers
- SS-EN-12102-2 - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters
- SS-EN-12545 - Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
- SS-EN-12549 - Acoustics - Noise test code for fastener driving tools - Engineering method
- SS-EN-12639 - Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
- SS-EN-1265 - Safety of machinery - Noise test code for foundry machines and equipment
- SS-EN-1271 - Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods
- SS-EN-13023 - Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
- SS-EN-13487 - Heat exchanger - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement
- SS-EN-13565-2 - Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance
- SS-EN-14195 - Metal framing components for gypsum board systems - Definitions, requirements and test methods
- SS-EN-14214 - Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
- SS-EN-14366 - Laboratory measurement of noise from waste water installations
- SS-EN-14366-1 - Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations
- SS-EN-14462 - Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
- SS-EN-14584 - Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
- SS-EN-15036-1 - Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
- SS-EN-15036-2 - Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator
- SS-EN-15200 - Sanitary appliances - Multifunction shower cabinets
- SS-EN-1547 - Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment.
- SS-EN-1915-4 - Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction
- SS-EN-25136 - Acoustics - Determination of sound power radiatedinto a duct by fans - In-duct method
- SS-EN-27182 - Acoustics - Measurement at the operators positionof airborne noice emitted by chain saws
- SS-EN-415-10 - Safety of packaging machines - Part 10: General Requirements
- SS-EN-415-9 - Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
- SS-EN-ISO-10052 - Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)
- SS-EN-ISO-10052-AM1 - Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1 (ISO 10052:2004/Amd 1:2010)
- SS-EN-ISO-11200 - Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
- SS-EN-ISO-11200-AM1 - Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
- SS-EN-ISO-11201 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
- SS-EN-ISO-11202 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
- SS-EN-ISO-11202-AM1 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)
- SS-EN-ISO-11203 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
- SS-EN-ISO-11203-AM1 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)
- SS-EN-ISO-11204 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
- SS-EN-ISO-11205 - Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
- SS-EN-ISO-11546-1 - Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
- SS-EN-ISO-11546-2 - Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
- SS-EN-ISO-11688-1 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
- SS-EN-ISO-11688-2 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
- SS-EN-ISO-11689 - Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
- SS-EN-ISO-12001 - Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
- SS-EN-ISO-15744 - Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)
- SS-EN-ISO-16032 - Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
- SS-EN-ISO-1680 - Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
- SS-EN-ISO-17201-1 - Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018)
- SS-EN-ISO-17201-2 - Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO/FDIS 17201-2:2006) (ISO 17201-2:2006)
- SS-EN-ISO-17201-3 - Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)
- SS-EN-ISO-17201-4 - Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006)
- SS-EN-ISO-17201-5 - Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010)
- SS-EN-ISO-17201-6 - Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021)
- SS-EN-ISO-20270 - Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019)
- SS-EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
- SS-EN-ISO-2151 - Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)
- SS-EN-ISO-22868 - Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)
- SS-EN-ISO-23771 - Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015)
- SS-EN-ISO-3822-1 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
- SS-EN-ISO-3822-1-AM1 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)
- SS-EN-ISO-3822-2 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
- SS-EN-ISO-3822-3 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)
- SS-EN-ISO-3822-3-AM1 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1 (ISO 3822-3:1997/Amd 1:2009)
- SS-EN-ISO-3822-4 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
- SS-EN-ISO-4871 - Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
- SS-EN-ISO-5135 - Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)
- SS-EN-ISO-5136 - Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
- SS-EN-ISO-7779 - Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2018)
- SS-EN-ISO-7779-AM1 - Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment - Amendment 1: Noise measurement specification for CD/DVD-ROM drives (ISO 7779:2001/Amd 1:2003)
- SS-EN-ISO-8528-10 - Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022)
- SS-EN-ISO-9295 - Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)
- SS-EN-ISO-9902-1 - Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)
- SS-EN-ISO-9902-1-AM1 - Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO 9902-1:2001/Amd 1:2009)
- SS-EN-ISO-9902-1-AM2 - Textile machinery - Noise test code - Part 1: Common requirements - Amendment 2 (ISO 9902-1:2001/Amd 2:2014)
- SS-EN-ISO-9902-2 - Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)
- SS-EN-ISO-9902-2-AM1 - Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 1 (ISO 9902- 2:2001/Amd 1:2009)
- SS-EN-ISO-9902-2-AM2 - Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 2 (ISO 9902-2:2001/Amd 2:2014)
- SS-EN-ISO-9902-3 - Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)
- SS-EN-ISO-9902-3-AM1 - Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 1 (ISO 9902-3:2001/Amd 1:2009)
- SS-EN-ISO-9902-3-AM2 - Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2 (ISO 9902-3:2001/Amd 2:2014)
- SS-EN-ISO-9902-4 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
- SS-EN-ISO-9902-4-AM2 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)
- SS-EN-ISO-9902-5 - Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)
- SS-EN-ISO-9902-5-AM2 - Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001/Amd 2:2014)
- SS-EN-ISO-9902-6 - Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2018)
- SS-EN-ISO-9902-6-AM1 - Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery - Amendment 1 (ISO 9902-6: 2001/Amd 1:2009)
- SS-EN-ISO-9902-6-AM2 - Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001/Amd 2:2014)
- SS-EN-ISO-9902-7 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)
- SS-EN-ISO-9902-7-AM1 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery - Amendment 1 (ISO 9902-7:2001/Amd 1:2009)
- SS-EN-ISO-9902-7-AM2 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001/Amd 2:2014)
- SS-ENV-12102 - Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level
- SS-ISO-10302 - Acoustics - Method for the measurement of airborne noise emitted by small air-moving devices
- SS-ISO-10302-1 - Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 1: Airborne noise measurement (ISO 10302-1:2011, IDT)
- SS-ISO-10302-2 - Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 2: Structure-borne vibration measurements (ISO 10302-2:2011, IDT)
- SS-ISO-10791-6 - Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations (ISO 10791-6:2014, IDT)
- SS-ISO-10843 - Acoustics - Methods for the description and physical measurement of single impulses or series of impulses
- SS-ISO-10884 - Manually portable brush-cutters and grass-trimmers with internal combustion engine - Determination of sound power levels - Engineering method (Grade 2)
- SS-ISO-13475-1 - Acoustics - Stationary audible warning devices used outdoors - Part 1: Field Measurements for determination of sound emission quantities
- SS-ISO-15086-1 - Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction
- SS-ISO-15086-2 - Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2: Measurement of the speed of sound in a fluid in a pipe
- SS-ISO-15086-3 - Hydraulic fluid power Determination of the fluid-borne noise characteristics of components and systems Part 3: Measurement of hydraulic impedance (15086-3:2022, IDT)
- SS-ISO-15664 - Acoustics - Noise control design procedures for open plant
- SS-ISO-15665 - Acoustics - Acoustic insulation for pipes, valves and flanges (ISO 15665:2003 + Cor 1:2004, IDT)
- SS-ISO-1680-1 - Acoustics - Measurement of airborne noise emittedby rotating electrical machinery - Engineering method for free-field conditions over a reflecting plane
- SS-ISO-1680-2 - Acoustics - Measurement of airborne noise emittedby rotating electrical machinery - Survey method
- SS-ISO-16902-1 - Hydraulic fluid power - Test code for the determination of sound power levels of pumps using sound intensity techniques - Engineering method - Part 1: Pumps
- SS-ISO-1746 - Rubber or plastics hoses and tubing - Bending tests - Technical Corrigendum 1
- SS-ISO-18564 - Machinery for forestry - Noise test code (ISO 18564:2016, IDT)
- SS-ISO-1999 - Acoustics - Estimation of noise-induced hearing loss (ISO 1999:2013, IDT)
- SS-ISO-20270 - Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019, IDT)
- SS-ISO-20361 - Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007, IDT)
- SS-ISO-20816-4 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbine sets in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018, IDT)
- SS-ISO-22096 - Condition monitoring and diagnostics of machines - Acoustic emission (ISO 22096:2007, IDT)
- SS-ISO-230-5 - Test code for machine tools - Part 5: Determination of the noise emission
- SS-ISO-27327-2 - Fans - Air curtain units - Part 2: Laboratory methods of testing for sound power (ISO 27327-2:2014, Corrected version 2014-03-01, IDT)
- SS-ISO-3095 - Acoustics - Measurement of noise emitted by railbound vehicles
- SS-ISO-3744 - Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineeringmethod in an essentially free field over a reflecting plane
- SS-ISO-4872 - Acoustics - Measurement of airborne noise emittedby construction equipment intended for outdoor use - Method for determining compliance with noise limits
- SS-ISO-5131 - Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator's position - Survey method
- SS-ISO-5136 - Acoustics - Determination of sound power radiatedinto a duct by fans - In-duct method
- SS-ISO-6393 - Earth-moving machinery - Determination of sound power level - Stationary test conditions (ISO 6393:2008, IDT)
- SS-ISO-6394 - Earth-moving machinery - Determination of emission sound pressure level at operator's position - Stationary test conditions (ISO 6394:2008, IDT)
- SS-ISO-6395 - Earth-moving machinery - Determination of sound power level - Dynamic test conditions (ISO 6395:2008, IDT)
- SS-ISO-6396 - Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions (ISO 6396:2008, IDT)
- SS-ISO-7182 - Acoustics - Measurement at the operator?s position of airborne noise emitted by chain saws
- SS-ISO-7574-1 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions
- SS-ISO-7574-2 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines
- SS-ISO-7574-3 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) methods for stated values for batches of machines
- SS-ISO-7574-4 - Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines
- SS-ISO-7779 - Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
- SS-ISO-7917 - Acoustics - Measurements at the operator's position of airborne noise emitted by brush saws
- SS-ISO-7919-2 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 7919-2:2009, IDT)
- SS-ISO-7919-3 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines (ISO 7919-3:2009, IDT)
- SS-ISO-7919-3-AM1 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines (ISO 7919-3:2009/Amd 1:2017, IDT)
- SS-ISO-7919-4 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings (ISO 7919-4:2009, IDT)
- SS-ISO-7960 - Airborne noise emitted by machine tools - Operating conditions for woodworking machines
- SS-ISO-8297 - Acoustics - Determination of sound power levels of multisource industrial plants f"r evaluation of sound pressure leveles in the invironmental - Engineering method
- SS-ISO-8297-AM1 - Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method - Amendment 1 (ISO 8297:1994/Amd 1:2021, IDT)
- SS-ISO-8525 - Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines (ISO 8525:2008, IDT)
- SS-ISO-8630-3 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side - Part 3: Track format B for 80 tracks - Teechnical corrigendum 1
- SS-ISO-9207 - Forestry machinery - Manually portable chain-sawswith internal combustion engine - Determination of sound power levels - Engineering method (Grade 2)
- SS-ISO-9295 - Acoustics -- Determination of high-frequency sound power levels emitted by machinery and equipment
- SS-ISO-9296 - Acoustics - Declared noise emmission values of computer and business equipment
- SS-ISO-9611 - Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted (ISO 9611:1996, IDT)
- SS-ISO-TR-11688-1 - Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning
- SS-ISO/TR-11690-3 - Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part3: Sound propagation and noise prediction in workrooms
- UNE-EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy