Document Center List of Standards on Measurement Of Volume, Mass, Density, Viscosity Including Measuring Instruments Volumetric Measurements Of Petroleum Products And Natural Gas, See 75.180.30
ICS Code 17.060
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-B873 - Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
- ASTM-C1005 - Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
- ASTM-C1276 - Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer (Withdrawn 2009)
- ASTM-C693 - Standard Test Method for Density of Glass by Buoyancy
- ASTM-D1124 - Specification for Hydrometer-Thermometer Field Tester for Engine Coolants (Withdrawn 1993)
- ASTM-D1217 - Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- ASTM-D1480 - Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM-D1481 - Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (Withdrawn 2023)
- ASTM-D1545 - Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
- ASTM-D2161 - Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
- ASTM-D2162 - Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
- ASTM-D2196 - Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
- ASTM-D2270 - Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
- ASTM-D4052 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM-D4212 - Standard Test Method for Viscosity by Dip-Type Viscosity Cups
- ASTM-D4222 - Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
- ASTM-D445 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- ASTM-D446 - Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
- ASTM-D4486 - Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
- ASTM-D4753 - Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
- ASTM-D5478 - Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
- ASTM-D5595 - Standard Practice for Determining Buoyancy Corrections During Precision Weighing of Low-Density Samples (Withdrawn 1997)
- ASTM-D5931 - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
- ASTM-D6022 - Standard Practice for Calculation of Permanent Shear Stability Index
- ASTM-D6161 - Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
- ASTM-D6172 - Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
- ASTM-D6347 - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
- ASTM-D6606 - Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer (Withdrawn 2022)
- ASTM-D6616 - Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM-D6703 - Standard Test Method for Automated Heithaus Titrimetry
- ASTM-D6716 - Standard Test Method for Total Ash in Wet Blue or Wet White
- ASTM-D6896 - Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
- ASTM-D6910 - Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries (Withdrawn 2018)
- ASTM-D7042 - Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM-D7109 - Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
- ASTM-D7271 - Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
- ASTM-D7279 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- ASTM-D7394 - Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
- ASTM-D7481 - Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
- ASTM-D7483 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM-D7496 - Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
- ASTM-D7961 - Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
- ASTM-D8092 - Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
- ASTM-D88 - Standard Test Method for Saybolt Viscosity
- ASTM-D941 - Test Method for Density and Relative Density (Specific Gravity) of Liquids by Lipkin Bicapillary Pycnometer (Withdrawn 1993)
- ASTM-E100 - Standard Specification for ASTM Hydrometers
- ASTM-E126 - Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM-E1865 - Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
- ASTM-E2408 - Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
- ASTM-E2509 - Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
- ASTM-E2510 - Standard Test Method for Torque Calibration or Conformance of Rheometers
- ASTM-E2975 - Standard Test Method for Calibration or Calibration Verification of Constant Speed Concentric Cylinder Rotational Viscometers
- ASTM-E2977 - Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
- ASTM-E2995 - Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM-E3070 - Standard Test Method for Shear Thinning Index of Non-Newtonian Liquids Using a Rotational Viscometer
- ASTM-E3116 - Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
- ASTM-E319 - Standard Practice for the Evaluation of Single-Pan Mechanical Balances (Withdrawn 2021)
- ASTM-E542 - Standard Practice for Calibration of Laboratory Volumetric Apparatus
- ASTM-E898 - Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
- ASTM-E908 - Standard Practice for Calibrating Gaseous Reference Leaks
- ASTM-F1080 - Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
BSI:
- BS-188 - Methods for determination of the viscosity of liquids
- BS-1887 - Specification for person weighing machines and height-measuring equipment for hospitals, welfare and health services
- BS-1922 - Specification for glass dispensing measures for pharmaceutical purposes
- BS-2000-71 - Methods of test for petroleum and its products. Kinematic viscosity of transparent and opaque liquids and calculation of dynamic viscosity
- BS-2701 - Specification for Rees-Hugill powder density flask
- BS-3221-1 - Medicine measures
- BS-3221-6 - Medicine measures
- BS-3405 - Method for measurement of particulate emission including grit and dust (simplified method)
- BS-5540-2 - Evaluating Particulate Contamination of Hydraulic Fluids, Method of Calibrating Liquid
- BS-6057-3-3.7 - Rubber latices. Methods of test. Determination of density of natural rubber latices
- BS-701 - Specification for brewers' mash flask
- BS-718 - Specification for density hydrometers
- BS-733-2 - Pyknometers
- BS-734-1 - Measurement of the density of milk using a hydrometer
- BS-894 - Specification for Ubbelohde apparatus for flow and drop points
- BS-EN-45501 - Metrological aspects of non-automatic weighing instruments
- BS-EN-45501-TC - Tracked Changes. Metrological aspects of non-automatic weighing instruments
- BS-EN-ISO-15212-2 - Oscillation-type density meters
- BS-EN-ISO-23783-2 - Automated liquid handling systems
- BS-EN-ISO-3819 - Laboratory glassware. Beakers
- BS-EN-ISO-385 - Laboratory glassware. Burettes
- BS-EN-ISO-4787 - Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use
- BS-EN-ISO-4787-TC - Tracked Changes. Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use
- BS-EN-ISO-4788 - Laboratory glassware. Graduated measuring cylinders
- BS-EN-ISO-648 - Laboratory glassware. Single-volume pipettes
- BS-EN-ISO-835 - Laboratory glassware. Graduated pipettes
- BS-EN-ISO-8655-2 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-2-TC - Tracked Changes. Piston-operated volumetric apparatus
- BS-EN-ISO-8655-3 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-4 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-5 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-5-TC - Tracked Changes. Piston-operated volumetric apparatus
- BS-EN-ISO-8655-6 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-6-TC - Tracked Changes. Piston-operated volumetric apparatus
- BS-EN-ISO-8655-7 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-7-TC - Tracked Changes. Piston-operated volumetric apparatus
- BS-EN-ISO-8655-8 - Piston-operated volumetric apparatus
- BS-EN-ISO-8655-9 - Piston-operated volumetric apparatus
- BSI CONVERSION SLIDE - Conversion factors for units
- BS-IEC-60692 - Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
- BS-ISO-13689 - Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. Microwave-type level gauge
- BS-ISO-21413 - Manual methods for the measurement of a groundwater level in a well
- BS-ISO-23783-2 - Automated liquid handling systems
- BS-ISO-23783-3 - Automated liquid handling systems
- BS-ISO-5215 - Laboratory plastic ware. Volumetric flasks
- PD-ISO-20461 - Determination of uncertainty for volume measurements made using the gravimetric method
- PD-ISO-6037 - Automated liquid handling systems. Uncertainty of the measurement procedures
IEC:
- IEC-61779-1 - Part 1: General Requirements & Test Methods, Electrical Apparatus for the Detection & Meas
- IEC-61779-2 - Part 2: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up To
- IEC-61779-3 - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up To
- IEC-61779-4 - Part 4: Performance Requirements for Group Ii Apparatus Indicating a Volume Fraction Up To
- IEC-61779-5 - Part 5: Performance Requirements for Group Ii Apparatus Indicating a Volume Fraction Up To
- IEC-61779-6 - Part 6: Guide for the Selection, Installation, Use & Maintenance of Apparatus for the Dete
ISO:
- ISO-1042 - Laboratory glassware - One-mark volumetric flasks
- ISO-15212-1 - Oscillation-type density meters - Part 1: Laboratory instruments
- ISO-15212-2 - Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids
- ISO-16153 - Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method
- ISO-1768 - Glass hydrometers - Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
- ISO-1769 - Laboratory glassware - Pipettes - Colour coding
- ISO-20461 - Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method
- ISO-21413 - Manual methods for the measurement of a groundwater level in a well
- ISO-23783-2 - Automated liquid handling systems - Part 2: Measurement procedures for the determination of volumetric performance
- ISO-23783-3 - Automated liquid handling systems - Part 3: Determination, specification and reporting of volumetric performance
- ISO-3105 - Glass capillary kinematic viscometers - Specifications and operating instructions
- ISO-3105 FRENCH - Glass capillary kinematic viscometers - Specifications and operating instructions [Standard in French]
- ISO-3507 - Laboratory glassware -- Pyknometers
- ISO-3666 - Viscosity of water
- ISO-3819 - Laboratory glassware - Beakers
- ISO-384 - Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- ISO-385 - Laboratory glassware - Burettes
- ISO-387 - Hydrometers - Principles of construction and adjustment
- ISO-4787 - Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
- ISO-4788 - Laboratory glassware - Graduated measuring cylinders
- ISO-4801 - Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
- ISO-4805 - Laboratory glassware - Thermo-alcoholometers and alcohol-thermohydrometers
- ISO-5215 - Laboratory plastic ware - Volumetric flasks
- ISO-648 - Laboratory glassware - Single-volume pipettes
- ISO-649-1 - Laboratory glassware - Density hydrometers for general purposes - Part 1 : Specification
- ISO-649-2 - Laboratory glassware - Density hydrometers for general purposes - Part 2 : Test methods and use
- ISO-650 - Relative density 60/60 degrees F hydrometers for general purposes
- ISO-6706 - Plastics laboratory ware - Graduated measuring cylinders
- ISO-7056 - Plastics laboratory ware - Beakers
- ISO-7550 - Laboratory glassware - Disposable micropipettes
- ISO-7712 - Laboratory glassware - Disposable Pasteur pipettes
- ISO-835 - Laboratory glassware - Graduated pipettes
- ISO-8655-1 - Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations
- ISO-8655-10 - Piston-operated volumetric apparatus - Part 10: User guidance, and requirements for competence, training, and POVA suitability
- ISO-8655-2 - Piston-operated volumetric apparatus - Part 2: Pipettes
- ISO-8655-3 - Piston-operated volumetric apparatus - Part 3: Burettes
- ISO-8655-4 - Piston-operated volumetric apparatus - Part 4: Dilutors
- ISO-8655-5 - Piston-operated volumetric apparatus - Part 5: Dispensers
- ISO-8655-6 - Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume
- ISO-8655-7 - Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume
- ISO-8655-8 - Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume
- ISO-8655-9 - Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes
Other SDOs:
- DIN-EN-ISO-15212-1 - Part 1: Laboratory Instruments, Oscillation-Type Density Meters
- DIN-EN-ISO-15212-2 - Part 2: Process Instruments for Homogeneous Liquids, Oscillation-Type Density Meters (
- DIN-EN-ISO-385 - Laboratory Glassware, Burettes
- DIN-EN-ISO-4788 - Laboratory Glassware, Graduated Measuring Cylinders
- DIN-EN-ISO-8655-1 - Part 1: Terminology, General Requirements & User Recommendations, Piston-Operated Volu
- DIN-EN-ISO-8655-2 - Part 2: Piston Pipettes, Piston-Operated Volumetric Apparatus
- DIN-EN-ISO-8655-3 - Part 3: Piston Burettes, Piston-Operated Volumetric Apparatus
- DIN-EN-ISO-8655-4 - Part 4: Dilutors, Piston-Operated Volumetric Apparatus
- DIN-EN-ISO-8655-5 - Part 5: Dispensers, Piston-Operated Volumetric Apparatus
- DIN-EN-ISO-8655-6 - Part 6: Gravimetric Methods for the Determination of Measurement Error, Piston-Operate
- DIN-EN-ISO-8655-7 - Part 7: Non-Gravimetric Methods for the Assessment of Equipment Performance, Piston-Op
- EN-ISO-15212-2 - Part 2: Process Instruments for Homogeneous Liquids, Oscillation-Type Density Meters
- EN-ISO-3819 - Laboratory glassware - Beakers
- EN-ISO-384 - Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- EN-ISO-385 - Laboratory Glassware, Burettes
- EN-ISO-4787 - Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
- EN-ISO-4788 - Laboratory Glassware, Graduated Measuring Cylinders
- EN-ISO-648 - Laboratory Glassware - Single-Volume Pipettes
- EN-ISO-835 - Laboratory Glassware - Graduated Pipettes
- EN-ISO-8655-7 - Part 7: Non-Gravimetric Methods for the Assessment of Equipment Performance, Piston-Op
- JIS-B-7603 - Hopper scales
- SS-EN-ISO-1042 - Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998)
- SS-EN-ISO-15212-1 - Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998)
- SS-EN-ISO-15212-2 - Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002)
- SS-EN-ISO-23783-2 - Automated liquid handling systems - Part 2: Measurement procedures for the determination of volumetric performance (ISO 23783-2:2022)
- SS-EN-ISO-23783-3 - Automated liquid handling systems - Part 3: Determination, specification and reporting of volumetric performance (ISO 23783-3:2022)
- SS-EN-ISO-3819 - Laboratory glassware - Beakers (ISO 3819:2015)
- SS-EN-ISO-384 - Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
- SS-EN-ISO-385 - Laboratory glassware - Burettes (ISO 385:2005)
- SS-EN-ISO-4787 - Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
- SS-EN-ISO-4788 - Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005)
- SS-EN-ISO-648 - Laboratory glassware - Single-volume pipettes (ISO 648 .2008)
- SS-EN-ISO-835 - Laboratory glassware - Graduated pipettes (ISO 835:2007)
- SS-EN-ISO-8655-1 - Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2022)
- SS-EN-ISO-8655-2 - Piston-operated volumetric apparatus - Part 2: Pipettes (ISO 8655-2:2022)
- SS-EN-ISO-8655-3 - Piston-operated volumetric apparatus - Part 3: Burettes (ISO 8655-3:2022)
- SS-EN-ISO-8655-4 - Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2022)
- SS-EN-ISO-8655-5 - Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2022)
- SS-EN-ISO-8655-6 - Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO 8655-6:2022)
- SS-EN-ISO-8655-7 - Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022)
- SS-EN-ISO-8655-8 - Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO 8655-8:2022)
- SS-EN-ISO-8655-9 - Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes (ISO 8655-9:2022)
- SS-ISO-3105 - Glas capillary kinematic viscometers - Specifications and operating instructions
- SS-ISO/TR-3666 - Viscosity of water
- UNE-EN-45501 - Metrological aspects of non-automatic weighing instruments