Document Center List of Standards on Hand And Arm Protection Including Protective Gloves, Sleeves And Mits Medical Gloves, See 11.140
ICS Code 13.340.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D7329 - Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
- ASTM-D7866 - Standard Specification for Radiation Attenuating Protective Gloves
- ASTM-E3108 - Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
- ASTM-E3109 - Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
- ASTM-F2961 - Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
BSI:
- BS-2606 - Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
- BS-6526 - Domestic oven gloves. Requirements and test methods
- BS-697 - Specification for Rubber Gloves for Electrical Purposes
- BS-8613 - Finger protection devices for pedestrian doors. Specification
- BS-EN-1082-2 - Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives
- BS-EN-1082-3 - Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives
- BS-EN-12477 - Protective gloves for welders
- BS-EN-13277-7 - Protective equipment for martial arts
- BS-EN-13594 - Protective gloves for motorcycle riders. Requirements and test methods
- BS-EN-13594-TC - Tracked Changes. Protective gloves for motorcycle riders. Requirements and test methods
- BS-EN-14328 - Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods
- BS-EN-15613 - Knee and elbow protectors for indoor sports. Safety requirements and test methods
- BS-EN-16027 - Protective clothing. Gloves with protective effect for association football goal keepers
- BS-EN-16350 - Protective gloves. Electrostatic properties
- BS-EN-16523-2 - Determination of material resistance to permeation by chemicals
- BS-EN-16778 - Protective gloves. The determination of Dimethylformamide in gloves
- BS-EN-374-1 - Protective gloves against chemicals and micro-organisms. Terminology and performance requirements
- BS-EN-374-2 - Protective gloves against dangerous chemicals and microorganisms
- BS-EN-374-3 - Protective gloves against chemicals and micro-organisms. Determination of resistance to permeation by chemicals
- BS-EN-374-4 - Protective gloves against chemicals and micro-organisms
- BS-EN-381-4 - Protective clothing for users of hand-held chain saws
- BS-EN-381-7 - Protective clothing for users of hand-held chain saws
- BS-EN-388 - Protective gloves against mechanical risks
- BS-EN-407 - Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
- BS-EN-407-TC - Tracked Changes. Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
- BS-EN-420 - Protective gloves. General requirements and test methods
- BS-EN-421 - Protective gloves against ionizing radiation and radioactive contamination
- BS-EN-511 - Protective gloves against cold
- BS-EN-60903 - Live working. Gloves of insulating material
- BS-EN-659 - Protective gloves for firefighters
- BS-EN-ISO-10819 - Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
- BS-EN-ISO-10819-TC - Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
- BS-EN-ISO-11393-4 - Protective clothing for users of hand-held chainsaws
- BS-EN-ISO-20320 - Protective clothing for use in Snowboarding. Wrist Protectors. Requirements and test methods
- BS-EN-ISO-21420 - Protective gloves. General requirements and test methods
- BS-EN-ISO-374-1 - Protective gloves against dangerous chemicals and micro-organisms
- BS-EN-ISO-374-2 - Protective gloves against dangerous chemicals and micro-organisms
- BS-EN-ISO-374-4 - Protective gloves against dangerous chemicals and micro-organisms
- BS-EN-ISO-374-5 - Protective gloves against dangerous chemicals and micro-organisms
- BS-IEC-61942 - Live working. Gloves and mitts with mechanical protection
- BS-ISO-11999-4-TC - Tracked Changes. PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-18639-4 - PPE ensembles for firefighters undertaking specific rescue activities
- BS-ISO-23388 - Protective gloves against mechanical risks
- BS-ISO-23407 - Protective gloves against thermal risks (heat and/or fire)
- BS-ISO-25518 - Single-use rubber gloves for general applications. Specification
- BS-ISO-25518-TC - Tracked Changes. Single-use rubber gloves for general applications. Specification
ISO:
- ISO-10819 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
- ISO-10819-AM1 - - Amendment 1
- ISO-10819-AM2 - - Amendment 2
- ISO-11393-4 - Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements and test methods for protective gloves
- ISO-11933-2 - Components for containment enclosures - Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators
- ISO-11999-4 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 4: Gloves
- ISO-13999-1 - Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 1: Chain-mail gloves and arm guards
- ISO-13999-2 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail
- ISO-13999-3 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials
- ISO-15383 - Protective gloves for firefighters - Laboratory test methods and performance requirements
- ISO-18639-4 - PPE ensembles for firefighters undertaking specific rescue activities - Part 4: Gloves
- ISO-18639-4-AM1 - - Amendment 1: PPE ensembles for firefighters undertaking specific rescue activities - Part 4: Gloves - Amendment 1
- ISO-18889 - Protective gloves for pesticide operators and re-entry workers - Performance requirements
- ISO-20320 - Protective clothing for use in snowboarding - Wrist protectors - Requirements and test methods
- ISO-21420 - Protective gloves - General requirements and test methods
- ISO-21420-AM1 - - Amendment 1: Protective gloves - General requirements and test methods - Amendment 1
- ISO-21924-2 - Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
- ISO-21924-7 - Protective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors
- ISO-23388 - Protective gloves against mechanical risks
- ISO-23407 - Protective gloves against thermal risks (heat and/or fire)
- ISO-374-1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks
- ISO-374-1-AM1 - - Amendment 1
- ISO-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
- ISO-374-4 - Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals
- ISO-374-5 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks
- ISO-8546 - Hand protection - Guidance for selection and use
Other SDOs:
- DIN-EN-12477 - Protective Gloves for Welders
- DIN-EN-13546 - Protective Clothing - Hand, Arm, Chest, Abdomen, Leg, Foot & Genital Protectors for Fi
- DIN-EN-13567 - Protective Clothing - Hand, Arm, Chest, Abdomen, Leg, Genital & Face Protectors for Fe
- DIN-EN-13594 - Protective gloves for motorcycle riders - Requirements and test methods; German version EN 13594:2015
- DIN-EN-14328 - Protective Clothing, Gloves & Armguards Protecting Against Cuts by Powered Knives - Re
- DIN-EN-374-1 - Part 1: Terminology and Performance Requirements, Protective Gloves Against Chemicals &
- DIN-EN-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration; German version EN 374-2:2014
- DIN-EN-374-3 - Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals; German version EN 374-3:2003, Corrigendum to DIN EN 374-3:2003-12; German version EN 374-3:2003/AC:2006
- DIN-EN-388 - Protective gloves against mechanical risks; German version EN 388:2016
- DIN-EN-407 - Protective Gloves Against Thermal Risks (Heat &/or Fire)
- DIN-EN-420 - Protective Gloves - General Requirements & Test Methods
- DIN-EN-511 - Protective Gloves Against Cold
- DIN-EN-659 - Protective Gloves for Firefighters
- EN-12477 - Protective Gloves for Welders
- EN-13277-7 - Part 7: Additional Requirements & Test Methods for Hand & Foot Protectors, Protective
- EN-13594 - Protective gloves for motorcycle riders - Requirements and test methods
- EN-14328 - Protective Clothing, Gloves & Armguards Protecting Against Cuts by Powered Knives - Re
- EN-15613 - Knee & Elbow Protectors for Indoor Sports, Safety Requirements & Test Methods
- EN-16027 - Protective clothing - Gloves with protective effect for association football goal keepers
- EN-16350 - Protective gloves - Electrostatic properties
- EN-16778 - Protective gloves - The determination of Dimethylformamide in gloves
- EN-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
- EN-374-3 - Part 3: Determination of Resistance To Permeation by Chemicals, Protective Gloves Agai
- EN-374-4 - Protective gloves against chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals
- EN-388 - Protective gloves against mechanical risks
- EN-407 - Protective Gloves Against Thermal Risks (Heat & /or Fire)
- EN-420 - Protective Gloves - General Requirements & Test Methods
- EN-421 - Protective Gloves Against Ionizing Radiation & Radioactive Contamination
- EN-511 - Protective Gloves Against Cold
- EN-60903 - Specification for Gloves & Mitts of Insulating Material Forlive Working
- EN-659 - Protective Gloves for Firefighters
- EN-ISO-10819 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
- EN-ISO-374-1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks
- EN-ISO-374-5 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks
- SIS-CEN-ISO/TR-8546 - Hand protection - Guidance for selection and use (ISO/TR 8546:2022)
- SS-EN-1082-2 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail
- SS-EN-1082-3 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials
- SS-EN-12477 - Protective gloves for welders
- SS-EN-12477-AM1 - Protective gloves for welders
- SS-EN-13277-7 - Protective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors
- SS-EN-13594 - Protective gloves for motorcycle riders - Requirements and test methods
- SS-EN-14120 - Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods
- SS-EN-14139 - Ophthalmic optics - Specifications for ready-to-wear spectacles
- SS-EN-14328 - Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods
- SS-EN-15613 - Knee and elbow protectors for indoor sports - Safety requirements and test methods
- SS-EN-16027 - Protective clothing - Gloves with protective effect for association football goal keepers
- SS-EN-16350 - Protective gloves - Electrostatic properties
- SS-EN-16523-1 - Determination of material resistance to permeation by chemicals - Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact
- SS-EN-16778 - Protective gloves - The determination of Dimethylformamide in gloves
- SS-EN-2960 - Aerospace series - Heat resisting nickel base alloy (NI-P101HT) - Cold worked and solution treated - Bars for machining for fasteners - 3 mm = D = 50 mm
- SS-EN-374-1 - Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
- SS-EN-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
- SS-EN-374-3 - Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
- SS-EN-374-4 - Protective gloves against chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals
- SS-EN-388 - Protective gloves against mechanical risks
- SS-EN-407 - Protective gloves against thermal risks (heat and/or fire)
- SS-EN-420 - Protective gloves - General requirements and test methods
- SS-EN-421 - Protective gloves against ionizing radiation and radioactive contamination
- SS-EN-455-1 - Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
- SS-EN-455-2 - Medical gloves for single use - Part 2: Requirements and testing for physical properties
- SS-EN-455-3 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
- SS-EN-511 - Protective gloves against cold
- SS-EN-659 - Protective gloves for firefighters
- SS-EN-ISO-10819 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
- SS-EN-ISO-10819-AM1 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)
- SS-EN-ISO-10819-AM2 - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
- SS-EN-ISO-11393-4 - Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
- SS-EN-ISO-21043-2 - Forensic sciences - Part 2: Recognition, recording, collecting, transport and storage of items (ISO 21043-2:2018)
- SS-EN-ISO-21420 - Protective gloves - General requirements and test methods (ISO 21420:2020)
- SS-EN-ISO-374-1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
- SS-EN-ISO-374-1-AM1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)
- SS-EN-ISO-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration (ISO 374-2:2019)
- SS-EN-ISO-374-4 - Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals (ISO 374-4:2019)
- SS-EN-ISO-374-5 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
- SS-EN-ISO-81060-3 - Non-invasive sphygmomanometers - Part 3: Clinical investigation of continuous automated measurement type (ISO 81060-3:2022)
- UNE-EN-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration