Document Center List of Standards on Fire-Resistance Of Building Materials And Elements
ICS Code 13.220.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1795 - Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
- ASTM-D3143 - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
- ASTM-D5664 - Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM-D6513 - Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
- ASTM-D6668 - Standard Test Method for Discrimination Between Flammability Ratings of F = 0
and F = 1 - ASTM-D6841 - Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
- ASTM-D7309 - Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM-D7746 - Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
- ASTM-E108 - Standard Test Methods for Fire Tests of Roof Coverings
- ASTM-E119 - Standard Test Methods for Fire Tests of Building Construction and Materials
- ASTM-E1321 - Standard Test Method for Determining Material Ignition and Flame Spread Properties
- ASTM-E136 - Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C
- ASTM-E162 - Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM-E1623 - Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
- ASTM-E1678 - Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
- ASTM-E1740 - Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
- ASTM-E2231 - Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
- ASTM-E2257 - Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
- ASTM-E2297 - Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
- ASTM-E2393 - Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
- ASTM-E2599 - Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
- ASTM-E2652 - Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750 °C
- ASTM-E2690 - Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
- ASTM-E2707 - Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
- ASTM-E2726 - Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
- ASTM-E2749 - Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM-E2750 - Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814
- ASTM-E2768 - Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
- ASTM-E2816 - Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
- ASTM-E2837 - Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
- ASTM-E286 - Method of Test for Surface Flammability of Building Materials Using an 8-Ft. (2.44-M) Tunnel Furnace (Withdrawn 1991)
- ASTM-E2874 - Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire
- ASTM-E2957 - Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
- ASTM-E3021 - Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates
- ASTM-E3037 - Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
- ASTM-E3134 - Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems
- ASTM-E603 - Standard Guide for Room Fire Experiments
- ASTM-E605 - Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- ASTM-E736 - Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
- ASTM-E759 - Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM-E760 - Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM-E761 - Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM-E814 - Standard Test Method for Fire Tests of Penetration Firestop Systems
- ASTM-E84 - Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM-E859 - Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
- ASTM-E906 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
- ASTM-E931 - Practice for Classification of Occupancies for Their Relative Fire Hazard (Withdrawn 1996)
- ASTM-E937 - Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- ASTM-F1534 - Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
- ASTM-F2133 - Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel (Withdrawn 2013)
- ASTM-F2152 - Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
- ASTM-F3214 - Standard Practice for Characterization of Fire Properties of Seating, Upholstery, and Padding Materials for Vehicles Associated with Amusement Rides and Devices
BSI:
- BS-476-10 - Fire tests on building materials and structures
- BS-476-11 - Fire tests on building materials and structures
- BS-476-12 - Fire tests on building materials and structures
- BS-476-13 - Fire tests on building materials and structures
- BS-476-15 - Fire tests on building materials and structures
- BS-476-20 - Fire tests on building materials and structures
- BS-476-21 - Fire tests on building materials and structures
- BS-476-22 - Fire tests on building materials and structures
- BS-476-23 - Fire tests on building materials and structures
- BS-476-24 - Fire tests on building materials and structures
- BS-476-3 - Fire tests on building materials and structures
- BS-476-31.1 - Fire tests on building materials and structures
- BS-476-32 - Fire tests on building materials and structures
- BS-476-33 - Fire tests on building materials and structures
- BS-476-4 - Fire tests on building materials and structures
- BS-476-6 - Fire tests on building materials and structures
- BS-476-7 - Fire tests on building materials and structures
- BS-476-8 - Fire tests on building materials and structures
- BS-5268-4.2 - Structural Use of Timber, Fire Resistance of Timber Structures, Recommended for Calcul
- BS-5950-8 - Structural Use of Steelwork in Building, Code of Practice for Fire Resistant Design
- BS-6203 - Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
- BS-6336 - Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment
- BS-8202-1 - Coatings for fire protection of building elements
- BS-8202-2 - Coatings for fire protection of building elements. Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
- BS-8414-1 - Fire performance of external cladding systems
- BS-8414-1-TC - Tracked Changes. Fire performance of external cladding systems
- BS-8414-2 - Fire performance of external cladding systems
- BS-8619 - Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels. Test method
- BS-9414 - Fire performance of external cladding systems. The application of results from BS 8414-1 and BS 8414-2 tests
- BS-EN-13238 - Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
- BS-EN-13381-1 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-10 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-2 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-3 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-4 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-5 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-6 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-7 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-8 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-13501-1 - Fire classification of construction products and building elements
- BS-EN-13501-1-TC - Tracked Changes. Fire classification of construction products and building elements
- BS-EN-13501-2 - Fire classification of construction products and building elements
- BS-EN-13501-2-TC - Tracked Changes. Fire classification of construction products and building elements
- BS-EN-13501-3 - Fire classification of construction products and building elements
- BS-EN-13501-4 - Fire classification of construction products and building elements
- BS-EN-13501-4-TC - Tracked Changes. Fire classification of construction products and building elements
- BS-EN-13501-5 - Fire classification of construction products and building elements
- BS-EN-13501-5-TC - Tracked Changes. Fire classification of construction products and building elements
- BS-EN-13501-6 - Fire classification of construction products and building elements
- BS-EN-1363-1 - Fire resistance tests
- BS-EN-1363-2 - Fire resistance tests
- BS-EN-1364-1 - Fire resistance tests for non-loadbearing elements
- BS-EN-1364-2 - Fire resistance tests for non-loadbearing elements
- BS-EN-1364-3 - Fire resistance tests for non-loadbearing elements
- BS-EN-1364-4 - Fire resistance tests for non-loadbearing elements
- BS-EN-1364-5 - Fire resistance tests for non-loadbearing elements
- BS-EN-1365-1 - Fire resistance tests for loadbearing elements
- BS-EN-1365-2 - Fire resistance tests for loadbearing elements
- BS-EN-1365-3 - Fire resistance tests for loadbearing elements
- BS-EN-1365-4 - Fire resistance tests for loadbearing elements
- BS-EN-1365-6 - Fire resistance tests for loadbearing elements
- BS-EN-1366-1 - Fire resistance tests for service installations
- BS-EN-1366-10-TC - Tracked Changes. Fire resistance tests for service installations.
- BS-EN-1366-11 - Fire resistance tests for service installations
- BS-EN-1366-12 - Fire resistance tests for service installations
- BS-EN-1366-13 - Fire resistance tests for service installations
- BS-EN-1366-2 - Fire resistance tests for service installations
- BS-EN-1366-3 - Fire resistance tests for service installations
- BS-EN-1366-3-TC - Tracked Changes. Fire resistance tests for service installations
- BS-EN-1366-4 - Fire resistance tests for service installations
- BS-EN-1366-5 - Fire resistance tests for service installations
- BS-EN-1366-6 - Fire resistance tests for service installations
- BS-EN-1366-9 - Fire resistance tests for service installations
- BS-EN-13823 - Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
- BS-EN-14135 - Coverings. Determination of fire protection ability
- BS-EN-14390 - Fire test. Large-scale room reference test for surface products
- BS-EN-15080-8 - Extended application of results from fire resistance tests
- BS-EN-15254-2 - Extended application of results from fire resistance tests. Nonloadbearing walls
- BS-EN-15254-4 - Extended application of results from fire resistance tests. Non-loadbearing walls
- BS-EN-15254-5 - Extended application of results from fire resistance tests. Non-loadbearing walls
- BS-EN-15254-6 - Extended application of results from fire resistance tests. Non-loadbearing walls
- BS-EN-15254-7 - Extended application of results from fire resistance tests. Non-loadbearing ceilings
- BS-EN-15269-1 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-11 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-2 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-20 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-3 - Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-3-TC - Tracked Changes. Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-5 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15269-7 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware
- BS-EN-15423 - Ventilation for buildings. Fire precaution for air distribution systems in buildings
- BS-EN-15715 - Thermal insulation products. Instructions for mounting and fixing for reaction to fire testing. Factory made products
- BS-EN-15725 - Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports
- BS-EN-15725-TC - Tracked Changes. Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports
- BS-EN-15882-1 - Extended application of results from fire resistance tests for service installations
- BS-EN-15882-3 - Extended applications of results from fire resistance tests for service installations
- BS-EN-15882-4 - Extended application of results from fire resistance tests for service installations
- BS-EN-16000 - Plastics piping systems. Systems within the building structure. Mounting and fixing of components in the test apparatus to thermal attack by a single burning item
- BS-EN-16034 - Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
- BS-EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware
- BS-EN-1634-2 - Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware
- BS-EN-1634-3 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware
- BS-EN-16623 - Paints and varnishes. Reactive coatings for fire protection of metallic substrates. Definitions, requirements, characteristics and marking
- BS-EN-16733 - Reaction to fire tests for building products. Determination of a building product's propensity to undergo continuous smouldering
- BS-EN-16755 - Durability of reaction to fire performance. Classes of fire-retardant treated wood products in interior and exterior end use applications
- BS-EN-17020-1 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17020-2 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17020-3 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17020-5 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows
- BS-EN-17873 - Flexible sheets for waterproofing. Underlays for discontinuous roof coverings and walls. Instructions for mounting and fixing for reaction to fire testing
- BS-EN-1991-1-2 - Eurocode 1. Actions on structures
- BS-EN-1991-1-2(NA) - UK National Annex to Eurocode 1. Actions on structures
- BS-EN-1992-1-2 - Eurocode 2. Design of concrete structures
- BS-EN-1992-1-2(NA) - UK National Annex to Eurocode 2. Design of concrete structures
- BS-EN-1993-1-2 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-2(NA) - UK National Annex to Eurocode 3. Design of steel structures
- BS-EN-1993-1-3 - Eurocode 3. Design of steel structures
- BS-EN-1994-1-2 - Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1994-1-2(NA) - UK National Annex to Eurocode 4. Design of composite steel and concrete structures
- BS-EN-1995-1-2 - Eurocode 5. Design of timber structures
- BS-EN-1995-1-2(NA) - UK National Annex to Eurocode 5. Design of timber structures
- BS-EN-1996-1-2 - Eurocode 6. Design of masonry structures
- BS-EN-1996-1-2(NA) - UK National Annex to Eurocode 6. Design of masonry structures
- BS-EN-1999-1-2 - Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-2(NA) - UK National Annex to Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-5 - Eurocode 9. Design of aluminium structures
- BS-EN-1999-1-5-TC - Tracked Changes. Eurocode 9. Design of aluminium structures
- BS-EN-50553 - Railway applications. Requirements for running capability in case of fire on board of rolling stock
- BS-EN-50575 - Power, control and communication cables. Cables for general applications in construction works subject to reaction to fire requirements
- BS-EN-50577 - Electric cables. Fire resistance test for unprotected electric cables (P classification)
- BS-EN-81-58 - Tracked Changes. Safety rules for the construction and installation of lifts. Examination and tests
- BS-EN-81-73 - Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts
- BS-EN-ISO-1182 - Reaction to fire tests for products. Non-combustibility test
- BS-EN-ISO-11925-2 - Reaction to fire tests. Ignitability of products subjected to direct impingement of flame
- BS-EN-ISO-11925-2-TC - Tracked Changes. Reaction to fire tests. Ignitability of products subjected to direct impingement of flame
- BS-EN-ISO-1716 - Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
- BS-EN-ISO-1716-TC - Tracked Changes. Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
- BS-ISO-10294-2 - Fire-resistance tests. Fire dampers for air distribution systems
- BS-ISO-10294-3 - Fire-resistance tests. Fire dampers for air distribution systems
- BS-ISO-10294-4 - Fire resistance tests. Fire dampers for air distribution systems
- BS-ISO-10294-5 - Fire-resistance tests. Fire dampers for air distribution systems
- BS-ISO-10295-1 - Fire tests for building elements and components. Fire testing of service installations
- BS-ISO-12136 - Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
- BS-ISO-13344 - Estimation of the lethal toxic potency of fire effluents
- BS-ISO-13784-2 - Reaction-to-fire tests for sandwich panel building systems
- BS-ISO-14697 - Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
- BS-ISO-14934-2 - Fire tests. Calibration and use of heat flux meters
- BS-ISO-14934-4 - Fire tests. Calibration and use of heat flux meters
- BS-ISO-17554 - Reaction to fire tests. Mass loss measurement
- BS-ISO-17554-TC - Tracked Changes. Reaction to fire tests. Mass loss measurement
- BS-ISO-20902-1 - Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries
- BS-ISO-20902-2 - Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries
- BS-ISO-21843 - Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
- BS-ISO-21925-1 - Fire resistance tests. Fire dampers for air distribution systems
- BS-ISO-22899-1 - Determination of the resistance to jet fires of passive fire protection materials
- BS-ISO-22899-1-TC - Tracked Changes. Determination of the resistance to jet fires of passive fire protection materials
- BS-ISO-23693-1 - Determination of the resistance to gas explosions of passive fire protection materials
- BS-ISO-5658-1 - Part 1: Guidance on Flame Spread
- BS-ISO-5658-2 - Reaction to fire tests. Spread of flame
- BS-ISO-5660-1 - Reaction-to-fire tests. Heat release, smoke production and mass loss rate
- BS-ISO-5660-1-TC - Reaction-to-fire tests. Heat release, smoke production and mass loss rate
- BS-ISO-6944-1 - Fire containment. Elements of building construction
- BS-ISO-834-10 - Fire resistance tests. Elements of building construction
- BS-ISO-834-11 - Fire resistance tests. Elements of building construction
- BS-ISO-834-2 - Fire-resistance tests. Elements of building construction
- BS-ISO-TR-11925-1 - Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Guidance on ignitability
- BS-ISO/TR-14697 - Fire Tests, Guidance on the Choice of Substrates for Building Products
- BS-ISO-TR-9705-2 - Reaction to fire tests. Full scale room tests for surface products
- DD-246 - Recommendations for the use of the cone calorimeter
- DD-CEN-1187 - Test methods for external fire exposure to roofs
- DD-CEN-13381-1 - Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
- DD-CEN-15117 - Guidance on direct and extended application
- DD-CEN-15447 - Mounting and fixing in reaction to fire tests under the Construction Products Directive
- DD-ENV-1187 - Test Methods for External Fire Exposure To Roofs
- DD-ENV-13381-2 - Test methods for determining the contribution to the fire resistance of structural members
- DD-ENV-13381-3 - Test methods for determining the contribution to the fire resistance of structural members
- DD-ENV-13381-4 - Test methods for determining the contribution to the fire resistance of structural members
- DD-ENV-13381-5 - Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete/profiled sheet composite members
- DD-ENV-13381-6 - Test methods for determining the contribution to the fire resistance of structural members
- DD-ENV-13381-7 - Test methods for determining the contribution to the fire resistance of structural members
- DD-ENV-1363-3 - Fire resistance tests
- DD-ENV-1995-1-2 - Eurocode 5. Design of timber structures
- DD-ENV-1996-1-2 - Eurocode 6. Design of masonry structures. General rules for buildings. Structural fire design (together with United Kingdom National Application Document)
- DD-ENV-1999-1-2 - Eurocode 9. Design of aluminium structures. General rules
- DD-ISO-14934-4 - Fire tests. Calibration of heat flux meters
- DD-ISO-22269 - Reaction to fire tests. Fire growth. Full-scale test for stairs and stair coverings
- DD-ISO-5658-1 - Reaction to fire tests. Spread of flame
- KIT-182 - Be-En-1992-1-2 & Uk National Annex Kit, Eurocode 2, Design of Concrete Structures, Gen
- PD-476-3 - Classification rules for the end-use application of test results arising from BS 476-3, 'Classification and method of test for external fire exposure of roofs'
- PD-6508 - Detail drawings for the apparatus specified in BS 476:Part 11:1982
- PD-6520 - Guide to fire test methods for building materials and elements of construction
- PD-6688-1-2 - Background paper to the UK National Annex to BS EN 1991-1-2
- PD-CEN-15985 - Thermal insulating products. Factory made products of expanded polystyrene (EPS). Voluntary certification of the raw material
- PD-CEN-16459 - External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187
- PD-CLC-50658 - Cable management systems (CMS) providing support for cables with intrinsic fire resistance
- PD-CLC-50670 - External fire exposure to roofs in combination with photovoltaic (PV) arrays. Test method(s)
- PD-ISO-10295-3 - Fire tests for building elements and components. Fire testing of service installations
- PD-ISO-12470-2 - Fire-resistance tests. Guidance on the application and extension of results from tests conducted on fire containment assemblies and products
- PD-ISO-12471 - Computational structural fire design. Review of calculation models, fire tests for determining input material data and needs for further development
- PD-ISO-20118 - Plastics. Guidance on fire characteristics and fire performance of PVC materials used in building applications
- PD-ISO-22899-2 - Determination of the resistance to jet fires of passive fire protection
- PD-ISO-3814 - Standard tests for measuring reaction-to-fire of products and materials. Their development and application
- PD-ISO-5660-3 - Reaction-to-fire tests. Heat release, smoke production and mass loss rate
- PD-ISO-5660-4 - Reaction-to-fire tests. Heat release, smoke production and mass loss rate
- PD-ISO-5660-5 - Reaction-to-fire tests. Heat release, smoke production and mass loss rate
ISO:
- ISO-10158 - Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
- ISO-10294-1 - Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
- ISO-10294-1-AM1 - - Amendment 1
- ISO-10294-2 - Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results
- ISO-10294-3 - Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method
- ISO-10294-4 - Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism
- ISO-10294-4-AM1 - - Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
- ISO-10294-5 - Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
- ISO-10295-1 - Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals
- ISO-10295-2 - Fire tests for building elements and components - Fire testing of service installations - Part 2: Linear joint (gap) seals
- ISO-10295-3 - Fire tests for building elements and components - Fire testing of service installations - Part 3: Single component penetration seals - Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
- ISO-11696-1 - Uses of reaction to fire test results -- Part 1: Application of test results to predict fire performance of internal linings and other building products
- ISO-11696-2 - Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products
- ISO-1182 - Reaction to fire tests for products - Non-combustibility test
- ISO-11925-1 - Reaction to fire tests -- Ignitability of building products subjected to direct impringement of flame -- Part 1: Guidance on ignitability
- ISO-11925-2 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
- ISO-11925-3 - Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test
- ISO-12136 - Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
- ISO-12468-1 - External exposure of roofs to fire - Part 1: Test method
- ISO-12468-2 - External exposure of roofs to fire - Part 2: Classification of roofs
- ISO-12468-3 - External exposure of roofs to fire - Part 3: Commentary
- ISO-12470-2 - Fire-resistance tests - Guidance on the application and extension of results from tests conducted on fire containment assemblies and products - Part 2: Non-loadbearing elements
- ISO-12471 - Computational structural fire design - Review of calculation models, fire tests for determining input material data and needs for further development
- ISO-12472 - Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
- ISO-12949 - Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
- ISO-13784-1 - Reaction to fire test for sandwich panel building systems - Part 1: Small room test
- ISO-13784-2 - Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms
- ISO-13785-1 - Reaction-to-fire tests for facades - Part 1: Intermediate-scale test
- ISO-13785-2 - Reaction-to-fire tests for facades - Part 2: Large-scale test
- ISO-14696 - Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
- ISO-14697 - Reaction-to-fire tests - Guidance on the choice of substrates for building and transport products
- ISO-14934-1 - Fire tests - Calibration and use of heat flux meters - Part 1: General principles
- ISO-14934-2 - Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
- ISO-14934-3 - Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method
- ISO-14934-4 - Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
- ISO-1716 - Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
- ISO-17252 - Fire tests - Applicability of reaction to fire tests to fire modelling and fire safety engineering
- ISO-17431 - Fire tests- Reduced-scale model box test
- ISO-17554 - Reaction to fire tests - Mass loss measurement
- ISO-20118 - Plastics - Guidance on fire characteristics and fire performance of PVC materials used in building applications
- ISO-20632 - Reaction-to-fire tests - Small room test for pipe insulation products or systems
- ISO-20902-1 - Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries - Part 1: General requirements
- ISO-20902-2 - Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries - Part 2: Additional procedures for pipe penetration and cable transit sealing systems
- ISO-21524 - Fire resistance tests - Elements of building construction - Requirements for active fire curtains
- ISO-21843 - Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
- ISO-21925-1 - Fire resistance tests - Fire dampers for air distribution systems - Part 1: Mechanical dampers
- ISO-21925-2 - Fire resistance tests - Fire dampers for air distribution systems - Part 2: Intumescent dampers
- ISO-22269 - Reaction to fire tests - Fire growth - Full-scale test for stairs and stair coverings
- ISO-22898 - Review of outputs for fire containment tests for buildings in the context of fire safety engineering
- ISO-22899-1 - Determination of the resistance to jet fires of passive fire protection materials - Part 1: General requirements
- ISO-22899-2 - Determination of the resistance to jet fires of passive fire protection - Part 2: Guidance on classification and implementation methods
- ISO-23657 - Reaction to fire test for sandwich panel building systems - Intermediate-scale box test
- ISO-23693-1 - Determination of the resistance to gas explosions of passive fire protection materials - Part 1: General requirements
- ISO-24473 - Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
- ISO-3008 - Fire-resistance tests - Door and shutter assemblies
- ISO-3008-1 - Fire resistance tests - Door and shutter assemblies - Part 1: General requirements
- ISO-3008-2 - Fire-resistance tests - Part 2: Lift landing door assemblies
- ISO-3008-3 - Fire resistance tests - Part 3: Door and shutter assemblies horizontally oriented
- ISO-3008-4 - Fire resistance tests - Door and shutter assemblies - Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction
- ISO-3009 - Fire-resistance tests - Elements of building construction - Glazed elements
- ISO-3009-1 - Amendment 1 to ISO 3009:1976
- ISO-3814 - Standard tests for measuring reaction-to-fire of products and materials - Their development and application
- ISO-4736 - Fire tests - Small chimneys - Testing at elevated temperatures
- ISO-5657 - Reaction to fire tests - Ignitability of building products using a radiant heat source
- ISO-5658-1 - Reaction to fire tests - Spread of flame - Part 1: Guidance on flame spread
- ISO-5658-2 - Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
- ISO-5658-2-AM1 - Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration - Amendment 1
- ISO-5658-4 - Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
- ISO-5660-1 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
- ISO-5660-2 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 2: Smoke production rate (dynamic measurement)
- ISO-5660-3 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 3: Guidance on measurement
- ISO-5660-4 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of low levels of heat release
- ISO-5660-5 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
- ISO-5925-1 - Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient- and medium-temperature leakage tests
- ISO-5925-1-AM1 - - Amendment 1
- ISO-5925-2 - Fire tests - Smoke-control door and shutter assemblies - Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
- ISO-6944 - Fire resistance tests - Ventilation ducts
- ISO-6944-1 - Fire containment - Elements of building construction - Part 1: Ventilation ducts
- ISO-6944-1-AM1 - - Amendment 1
- ISO-6944-2 - Fire containment - Elements of building construction - Part 2: Kitchen extract ducts
- ISO-834-1 - Fire-resistance tests -- Elements of building construction -- Part 1: General requirements
- ISO-834-10 - Fire resistance tests - Elements of building construction - Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
- ISO-834-11 - Fire resistance tests - Elements of building construction - Part 11: Specific requirements for the assessment of fire protection to structural steel elements
- ISO-834-12 - Fire resistance tests - Elements of building construction - Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
- ISO-834-13 - Fire-resistance tests - Elements of building construction - Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
- ISO-834-14 - Fire-resistance tests - Elements of building construction - Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
- ISO-834-1-AM1 - Fire-resistance tests - Elements of building construction - Part 1: General requirements - Amendment 1
- ISO-834-1-AM2 - - Amendment 2: Fire-resistance tests - Elements of building construction - Part 1: General requirements - Amendment 2
- ISO-834-2 - Fire-resistance tests - Elements of building construction - Part 2: Requirements and recommendations for measuring furnace exposure on test samples
- ISO-834-3 - Fire-resistance tests - Elements of building construction - Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
- ISO-834-4 - Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements
- ISO-834-5 - Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements
- ISO-834-6 - Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams
- ISO-834-7 - Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns
- ISO-834-8 - Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements
- ISO-834-9 - Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements
- ISO-9705 - Fire tests - Full-scale room test for surface products
- ISO-9705-1 - Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
- ISO-9705-2 - Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance
Other SDOs:
- BS-EN-1993-1-2-TC - Tracked Changes. Eurocode 3. Design of steel structures
- DIN-4102-8 - Part 8: Small-Scale Test Furnace, Fire Behaviour of Buildingmaterials & Elements
- DIN-EN-13238 - Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates; German version EN 13238:2010
- DIN-EN-13501-1 - Part 1: Classification Using Data From Reaction To Fire Tests, Fire Classification Of
- DIN-EN-13501-2 - Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services; German version EN 13501-2:2016
- DIN-EN-13501-3 - Part 3: Classification Using Data From Fire Resistance Tests on Products and Elements Us
- DIN-EN-13501-4 - Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems; German version EN 13501-4:2016
- DIN-EN-13501-5 - Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests; German version EN 13501-5:2016
- DIN-EN-1364-3 - Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly); German version EN 1364-3:2014
- DIN-EN-1364-4 - Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration; German version EN 1364-4:2014
- DIN-EN-1365-5 - Part 5: Balconies & Walkways, Fire Resistance Tests for Loadbearing Elements
- DIN-EN-1365-6 - Part 6: Stairs, Fire Resistance Tests for Loadbearing Elements
- DIN-EN-1366-3 - Part 3: Penetration Seals, Fire Resistance Tests for Service Installations
- DIN-EN-1366-4 - Part 4: Linear Joint Seals, Fire Resistance Tests for Service Installations
- DIN-EN-1366-5 - Part 5: Service Ducts & Shafts, Fire Resistance Tests for Service Installations
- DIN-EN-1366-6 - Part 6: Raised Access & Hollow Core Floors, Fire Resistance Tests for Service Install
- DIN-EN-1366-7 - Part 7: Conveyor Systems & Their Closures, Fire Resistance Tests for Service Installat
- DIN-EN-1366-8 - Part 8: Smoke Extraction Ducts, Fire Resistance Tests for Service Installations
- DIN-EN-13823 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item; German version EN 13823:2010+A1:2014
- DIN-EN-14135 - Coverings, Determination of Fire Protection Ability
- DIN-EN-14246 - Gypsum Elements for Suspended Ceilings - Definitions, Requirements & Test Methods
- DIN-EN-14390 - Fire Test - Large-Scale Room Reference Test for Surface Prodducts
- DIN-EN-1634-3 - Part 3: Smoke Control Test for Door & Shutter Assemblies, Fire Resistance & Smoke Cont
- DIN-EN-1991-1-2 - Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire; German version EN 1991-1-2:2002 + AC:2009
- DIN-EN-1992-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 2: Design of Concrete Struc
- DIN-EN-1993-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 3: Design of Steel Structur
- DIN-EN-1994-1-2 - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1994-1-2:2005 + AC:2008
- DIN-EN-1995-1-2 - Part 1-2: General - Structural Fire Design, Eurocode 5: Design of Timber Structures
- DIN-EN-1996-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 6: Design of Masonry Struct
- DIN-EN-1999-1-2 - Part 1-2: Structural Fire Design, Eurocode 9: Design of Aluminium Structures
- DIN-EN-357 - Glass in Building, Fire-Resistant Glazed Elements With Transparent or Translucent Glas
- DIN-EN-81-73 - Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire
- DIN-EN-ISO-1182 - Reaction To Fire Tests for Products - Non-Combustibility Test
- DIN-EN-ISO-11925-2 - Part 2: Single-Flame Source Test, Reaction To Fire Tests - Ignitability of Products Su
- DIN-EN-ISO-1716 - Reaction To Fire Tests for Products - Determination of the Gross Heat of Combustion (C
- DIN-EN-ISO-5659-2 - Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2006)
- EN-13238 - Reaction To Fire Tests for Building Products - Conditioning Procedures & General Rule
- EN-13381-1 - Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
- EN-13381-2 - Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
- EN-13381-3 - Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
- EN-13381-4 - Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
- EN-13381-5 - Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
- EN-13381-6 - Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
- EN-13381-7 - Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
- EN-13381-8 - Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
- EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
- EN-13501-1 - Part 1: Classification Using Data From Reaction To Fire Tests, Fire Classification Of
- EN-13501-2 - Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
- EN-13501-3 - Part 3: Classification Using Data From Fire Resistance Tests on Products & Elements Us
- EN-13501-4 - Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems
- EN-13501-5 - Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
- EN-13501-6 - Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables
- EN-1364-1 - Fire resistance tests for non-loadbearing elements - Part 1: Walls
- EN-1364-3 - Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
- EN-1364-4 - Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
- EN-1364-5 - Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
- EN-1365-1 - Fire resistance tests for loadbearing elements - Part 1: Walls
- EN-1365-2 - Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
- EN-1365-5 - Part 5: Balconies & Walkways, Fire Resistance Tests for Loadbearing Elements
- EN-1365-6 - Part 6: Stairs, Fire Resistance Tests for Loadbearing Elements
- EN-1366-1 - Fire resistance tests for service installations - Part 1: Ventilation ducts
- EN-1366-10 - Fire resistance tests for service installations - Part 10: Smoke control dampers
- EN-1366-11 - Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
- EN-1366-12 - Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
- EN-1366-13 - Fire resistance tests for service installations - Part 13: Chimneys
- EN-1366-2 - Fire resistance tests for service installations - Part 2: Fire dampers
- EN-1366-3 - Part 3: Penetration Seals, Fire Resistance Tests for Service Installations
- EN-1366-4 - Part 4: Linear Joint Seals, Fire Resistance Tests for Service Installations
- EN-1366-5 - Part 5: Service Ducts & Shafts, Fire Resistance Tests for Service Installations
- EN-1366-6 - Part 6: Raised Access & Hollow Core Floors, Fire Resistance Tests for Service Install
- EN-1366-7 - Part 7: Conveyor Systems & Their Closures, Fire Resistance Tests for Service Installat
- EN-1366-8 - Part 8: Smoke Extraction Ducts, Fire Resistance Tests for Service Installations
- EN-1366-9 - Fire Resistance Tests for Service Installations, Single Compartment Smoke Extraction D
- EN-14135 - Coverings, Determination of Fire Protection Ability
- EN-14390 - Fire Test - Large-Scale Room Reference Test for Surface Products
- EN-15080-12 - Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
- EN-15254-2 - Part 2: Masonry & Gypsum Blocks, Extended Application of Results From Fire Resistance
- EN-15254-4 - Extended Application of Results From Fire Resistance Tests, Non-Loadbearing Walls, Gl
- EN-15254-6 - Extended application of results from fire resistance tests - Non-load bearing walls - Part 6: Curtain walling
- EN-15254-7 - Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
- EN-15269-1 - Part 1: General Requirements, Extended Application of Test Results for Fire Resistance
- EN-15269-10 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
- EN-15269-11 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
- EN-15269-2 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
- EN-15269-3 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
- EN-15269-5 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
- EN-15269-7 - Part 7: Fire Resistance for Steel Sliding Doorsets, Extended Application of Test Resul
- EN-15423 - Ventilation for Buildings, Fire Precaution for Air Distribution Systems in Buildings
- EN-15715 - Thermal Insulation Products - Instructions for Mounting & Fixing for Reaction To Fire
- EN-15725 - Extended application reports on the fire performance of construction products and building elements
- EN-15882-1 - Extended application of results from fire resistance tests for service installations - Part 1: Ducts
- EN-15882-3 - Extended Applications of Results From Fire Resistance Tests for Service Installations
- EN-16000 - Plastics Piping Systems - Systems Within the Building Structure - Mounting & Fixing Of
- EN-16034 - Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
- EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
- EN-1634-2 - Fire Resistance & Smoke Control Tests for Door, Shutter & Openable Window Assemblies &
- EN-1634-3 - Part 3: Smoke Control Test for Door & Shutter Assemblies, Fire Resistance & Smoke Cont
- EN-16623 - Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
- EN-16733 - Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering
- EN-16755 - Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
- EN-1991-1-2 - Part 1-2: General Actions - Actions on Structures Exposed To Fire, Eurocode 1: Action
- EN-1991-1-2(NA) - Uk National Annex To Eurocode 1, Actions on Structures, General Actions, Actions on St
- EN-1992-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 2: Design of Concrete Struc
- EN-1992-1-2(NA) - Uk National Annex To Eurocode 2, Design of Concrete Structures, General Rules, Structu
- EN-1993-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 3: Design of Steel Structur
- EN-1993-1-2(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, General Rules, Structural
- EN-1994-1-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- EN-1994-1-2(NA) - Uk National Annex To Eurocode 4, Design of Composite Steel & Concrete Structures, Gene
- EN-1995-1-2 - Part 1-2: General - Structural Fire Design, Eurocode 5: Design of Timber Structures
- EN-1995-1-2(NA) - Uk National Annex To Eurocode 5, Design of Timber Structures, General, Structural Fire
- EN-1996-1-2 - Part 1-2: General Rules - Structural Fire Design, Eurocode 6: Design of Masonry Struct
- EN-1996-1-2(NA) - Uk National Annex To Eurocode 6, Design of Masonry Structures, General Rules, Structur
- EN-1999-1-2(NA) - Uk National Annex To Eurocode 9, Design of Aluminium Structures, Structural Fire Desig
- EN-1999-1-5 - Part 1-5: Shell Structures, Eurocode 9 - Design of Aluminium Structures
- EN-50553 - Railway applications - Requirements for running capability in case of fire on board of rolling stock
- EN-50575 - Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
- EN-50577 - Electric cables - Fire resistance test for unprotected electric cables (P classification)
- EN-81-73 - Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire
- EN-ISO-1182 - Reaction To Fire Tests for Products - Non-Combustibility Test
- EN-ISO-11925-2 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
- EN-ISO-1716 - Reaction To Fire Tests for Products - Determination of the Gross Heat of Combustion (C
- ISO-5660-1-AM1 - - Amendment 1
- SIS-24820 - Fire test. Fire resistance tests - Elements of building construction
- SIS-CEN-16459 - External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187,External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187
- SIS-CEN/TS-1187 - Test methods for external fire exposure to roofs
- SIS-CEN/TS-15117 - Guidance on direct and extended application
- SIS-CEN/TS-15447 - Mounting and fixing in reaction to fire tests under the Construction Products Directive
- SIS-CEN/TS-16459 - External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187,External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187
- SIS-ISO/TR-24679-8 - Fire safety engineering Performance of structures in fire Part 8: Example of a probabilistic fire design of structures (ISO/TR 24679-8:2022, IDT)
- SIS-ISO/TS-13399-50 - Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts (ISO/TS 13399-50:2013, IDT)
- SIS-ISO/TS-16733-2 - Fire safety engineering - Selection of design fire scenarios and design fires - Part 2: Design fires (ISO/TS 16733-2:2021)
- SIS-ISO/TS-19850 - Fire tests - method for evaluating the potential use of LED (light emitting diode) as alternative to white light for measuring the smoke density and smoke production rate in fire test
- SIS-ISO/TS-5660-4 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of low levels of heat release (ISO/TS 5660-4:2016, IDT)
- SIS-PAS-NA,-EN-1991-1-2 - Swedish National Annex NA to Eurocode EN 1991-1-2:2002, actions on structures exposed to fire
- SS-24827 - Fire tests - Building products - Door and shutterassemblies
- SS-24828 - Fire tests - Building construction - Glazed elements
- SS-24830 - Fire tests - Building products - Ignitability
- SS-EN-12003 - Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
- SS-EN-13238 - Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
- SS-EN-13381-1 - Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
- SS-EN-13381-10 - Test methods for determining the contribution to the fire resistance of structural members - Part 10: Applied protection to solid steel bars in tension
- SS-EN-13381-2 - Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
- SS-EN-13381-3 - Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
- SS-EN-13381-4 - Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
- SS-EN-13381-5 - Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
- SS-EN-13381-6 - Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
- SS-EN-13381-7 - Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
- SS-EN-13381-8 - Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
- SS-EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13480 - Metallic industrial piping
- SS-EN-13501-1 - Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
- SS-EN-13501-2 - Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
- SS-EN-13501-3 - Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
- SS-EN-13501-4 - Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems
- SS-EN-13501-5 - Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
- SS-EN-13501-6 - Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables
- SS-EN-1363-1 - Fire resistance tests - Part 1: General requirements
- SS-EN-1363-2 - Fire resistance tests - Part 2: Alternative and additional procedures
- SS-EN-1363-3 - Fire resistance tests - Part 3: Verification of furnace performance
- SS-EN-1364-1 - Fire resistance tests for non-loadbearing elements - Part 1: Walls
- SS-EN-1364-2 - Fire resistance for tests for non-loadbearing elements - Part 2: Ceilings
- SS-EN-1364-3 - Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
- SS-EN-1364-4 - Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
- SS-EN-1364-5 - Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
- SS-EN-1365-1 - Fire resistance tests for loadbearing elements - Part 1: Walls
- SS-EN-1365-2 - Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
- SS-EN-1365-3 - Fire resistance tests for loadbearing elements - Part 3: Beams
- SS-EN-1365-4 - Fire resistance tests for loadbearing elements - Part 4: Columns
- SS-EN-1365-5 - Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
- SS-EN-1365-6 - Fire resistance tests for loadbearing elements - Part 6: Stairs
- SS-EN-1366-1 - Fire resistance tests for service installations - Part 1: Ventilation ducts
- SS-EN-1366-10 - Fire resistance tests for service installations - Part 10: Smoke control dampers
- SS-EN-1366-11 - Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
- SS-EN-1366-12 - Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
- SS-EN-1366-13 - Fire resistance tests for service installations - Part 13: Chimneys
- SS-EN-1366-1-AM1 - Fire resistance tests for service installations - Part 1: Ventilation ducts
- SS-EN-1366-2 - Fire resistance tests for service installations - Part 2: Fire dampers
- SS-EN-1366-3 - Fire resistance tests for service installations - Part 3: Penetration seals
- SS-EN-1366-4 - Fire resistance tests for service installations - Part 4: Linear joint seals
- SS-EN-1366-5 - Fire resistance tests for service installations - Part 5: Service ducts and shafts
- SS-EN-1366-6 - Fire resistance tests for service installations - Part 6: Raised access and hollow core floors
- SS-EN-1366-7 - Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
- SS-EN-1366-8 - Fire resistance tests for service installations - Part 8: Smoke extraction ducts
- SS-EN-1366-9 - Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
- SS-EN-13823 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
- SS-EN-14135 - Coverings - Determination of fire protection ability
- SS-EN-14187-7 - Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame
- SS-EN-14274 - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
- SS-EN-14390 - Fire test - Large-scale room reference test for surface products
- SS-EN-14496 - Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
- SS-EN-14878 - Textiles - Burning behaviour of children's nightwear - Specification
- SS-EN-149 - Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
- SS-EN-15080-12 - Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
- SS-EN-15080-8 - Extended application of results from fire resistance tests - Part 8: Beams
- SS-EN-15254-2 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
- SS-EN-15254-3 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 3: Lightweight partitions
- SS-EN-15254-4 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
- SS-EN-15254-5 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction
- SS-EN-15254-6 - Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling
- SS-EN-15254-7 - Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
- SS-EN-15269-1 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
- SS-EN-15269-10 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
- SS-EN-15269-11 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
- SS-EN-15269-2 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
- SS-EN-15269-20 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for doors, shutters, operable fabric curtains and openable windows
- SS-EN-15269-3 - Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
- SS-EN-15269-5 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
- SS-EN-15269-7 - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
- SS-EN-15423 - Ventilation for buildings - Fire precautions for air distribution systems in buildings
- SS-EN-15725 - Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports
- SS-EN-15882-1 - Extended application of results from fire resistance tests for service installations - Part 1: Ducts
- SS-EN-15882-3 - Extended application of results from fire resistance tests for service installations - Part 3: Penetration seals
- SS-EN-15981 - European Learner Mobility - Achievement information (EuroLMAI)
- SS-EN-15998 - Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification
- SS-EN-16000 - Plastics piping systems - Systems within the building structure - Mounting and fixing of components in the test apparatus to thermal attack by a single burning item
- SS-EN-16034 - Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
- SS-EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
- SS-EN-1634-2 - Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware
- SS-EN-1634-3 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
- SS-EN-16623 - Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
- SS-EN-16733 - Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering
- SS-EN-16755 - Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
- SS-EN-17020-1 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel doorsets
- SS-EN-17020-2 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 2: Durability of self-closing of steel rolling shutters
- SS-EN-17020-3 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 3: Durability of self-closing of steel sliding doorsets
- SS-EN-17020-4 - Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows
- SS-EN-17020-5 - Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 5: Durability of self-closing of hinged and pivoted timber doorsets
- SS-EN-1991-1-2 - Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
- SS-EN-1992-1-2 - Eurocode 2 - Design of concrete structures Part 1-2: Structural fire design
- SS-EN-1992-1-2-AM1 - Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1993-1-2 - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
- SS-EN-1993-1-3 - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
- SS-EN-1993-1-5 - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
- SS-EN-1993-5 - Eurocode 3: Design of steel structures - Part 5: Piling
- SS-EN-1994-1-2 - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1994-1-2-AM1 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1995-1-2 - Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
- SS-EN-1996-1-2 - Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
- SS-EN-1999-1-2 - Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
- SS-EN-1999-1-5 - Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
- SS-EN-81-73 - Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire
- SS-EN-ISO-11074-AM1 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO/FDIS 11925-2:2019)
- SS-EN-ISO-1182 - Reaction to fire tests for products - Non-combustibility test (ISO/DIS 1182:2019)
- SS-EN-ISO-11925-2 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO/FDIS 11925-2:2019)
- SS-EN-ISO-11961 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
- SS-EN-ISO-15502 - Household refrigerating appliances - Characteristics and test methods (ISO 15502:2005/Cor 1:2007)
- SS-EN-ISO-1716 - Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
- SS-ENV-1187 - Test methods for external fire exposure to roofs
- SS-ENV-1187-AM1 - Test methods for external fire exposure to roofs
- SS-ENV-13381-2 - Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
- SS-ENV-13381-3 - Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
- SS-ENV-13381-4 - Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members
- SS-ENV-13381-5 - Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members
- SS-ENV-13381-6 - Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
- SS-ENV-13381-7 - Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
- SS-ISO-10295-1 - Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals (ISO 10295-1:2007, IDT)
- SS-ISO-10295-2 - Fire tests for building elements and components - Fire testing of service installations - Part 2: Linear joint (gap) seals (ISO 10295-2:2009, IDT)
- SS-ISO-13584-42 - Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring part families
- SS-ISO-13784-1 - Reaction to fire test for sandwich panel building systems - Part 1: Small room test (ISO 13784-1:2014, IDT)
- SS-ISO-13784-2 - Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms (ISO 13784-2:2020, IDT)
- SS-ISO-14697 - Reaction to fire tests - Guidance on the choice of substrates for building and transport products (ISO 14697:2007, IDT)
- SS-ISO-14934-2 - Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods (ISO 14934-2:2013, IDT)
- SS-ISO-14934-3 - Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method (ISO 14934-3:2012, IDT)
- SS-ISO-14934-4 - Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests (ISO 14934-4:2014, IDT)
- SS-ISO-20632 - Reaction to fire tests - Small room test for pipe insulation products or systems (ISO 20632, IDT)
- SS-ISO-21524 - Fire resistance tests - Elements of building construction - Requirements for active fire curtains (ISO 21524:2021, IDT)
- SS-ISO-22899-1 - Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements (ISO 22899-1:2021, IDT)
- SS-ISO-23693-1 - Determination of the resistance to gas explosions of passive fire protection materials Part 1: General requirements (ISO 23693-1:2021, IDT)
- SS-ISO-24473 - Fire tests - Open calorimetry - Measurement of the rate of production of heat and combustion products for fires of up to 40 MW (ISO 24473:2008, IDT)
- SS-ISO-3008 - Fire-resistance tests - Door and shutter assemblies (ISO 3008:2007, IDT)
- SS-ISO-4427-1 - Plastics piping systems for water supply and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General (ISO 4427-1:2019, IDT)
- SS-ISO-5006 - Earth-moving machinery - Operator's field of view - Test method and performance criteria (ISO 5006:2017, IDT)
- SS-ISO-5657 - Reaction to fire tests - Ignitability of buildingproducts using a radiant heat source
- SS-ISO-5658-2 - Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration (ISO 5658-2:2006, IDT)
- SS-ISO-5658-2-AM1 - Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration - Amendment 1 (ISO 5658-2:2006/Amd 1:2011, IDT)
- SS-ISO-5660-1 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) (ISO 5660-1:2015, IDT)
- SS-ISO-5660-1-AM1 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) - Amendment 1 (ISO 5660-1:2015/Amd 1:2019, IDT)
- SS-ISO-5660-4 - Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of heat release for determination of low levels of combustibility (ISO 5660-4:2008, IDT)
- SS-ISO-5925-1 - Fire tests - Smoke control door and shutter assemblies - Part 1: Ambient and medium temperature leakage test procedure (ISO 5925-1:2006, IDT)
- SS-ISO-6722-1 - Road vehicles - 60 V and 600 V single-core cables - Part 1: Dimensions, test methods and requirements for copper conductor cables (ISO 6722-1:2011, IDT)
- SS-ISO-6944-1 - Fire containment - Elements of building construction - Part 1: Ventilation ducts (ISO 6944-1:2008, IDT)
- SS-ISO-6944-2 - Fire containment - Elements of building construction - Part 2: Kitchen extract ducts (ISO 6944-2:2009, IDT)
- SS-ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995/Cor 2:1997, IDT)
- SS-ISO-834-12 - Fire resistance tests - Elements of building construction - Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces (ISO 834-12:2012, IDT)
- SS-ISO-9705-1 - Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration (ISO 9705-1:2016, IDT)
- UNE-EN-1363-1 - Fire resistance tests - Part 1: General Requirements
- UNE-EN-1365-1 - Fire resistance tests for loadbearing elements - Part 1: Walls
- UNE-EN-16623 - Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
- UNE-EN-1993-1-2 - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
- UNE-EN-1994-1-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.