Document Center List of Standards on Water Quality In General
ICS Code 13.060.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D3371 - Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography (Withdrawn 2002)
- ASTM-D4375 - Standard Practice for Basic Statistics in Committee D-19 on Water (Withdrawn 2018)
- ASTM-D4478 - Test Method for Oxygen Update (Withdrawn 1994)
- ASTM-D6908 - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
- ASTM-F1279 - Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
- ASTM-F2534 - Standard Guide for Visually Estimating Oil Spill Thickness on Water
BSI:
- BS-1427 - Guide to on-site test methods for the analysis of waters
- BS-2486 - Recommendations for treatment of water for steam boilers and water heaters
- BS-6068-1-1.2 - Water quality. Glossary. Additional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of water
- BS-6068-1.2 - Water quality. Glossary. Additional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of water
- BS-6068-2.22 - Water quality. Physical, chemical and biochemical methods. Examination and determination of colour
- BS-7593-TC - Tracked Changes. Code of practice for the preparation, commissioning and maintenance of domestic central heating and cooling water systems
- BS-8552 - Sampling and monitoring of water from building services closed systems. Code of practice
- BS-EN-15282 - Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- BS-EN-ISO-15061 - Water quality. Determination of dissolved bromate. Method by liquid chromatography of ions
- BS-EN-ISO-15839 - Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
- BS-EN-ISO-28765 - Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- BS EN ISO 28765-TC - Tracked Changes. Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- BS-ISO-13205 - Marine technology. Seawater desalination. Vocabulary
- BS-ISO-14017 - Environmental management. Requirements with guidance for verification and validation of water statements
- BS-ISO-16075-1 - Guidelines for treated wastewater use for irrigation projects
- BS-ISO-16075-2 - Guidelines for treated wastewater use for irrigation projects
- BS-ISO-16075-3 - Guidelines for treated wastewater use for irrigation projects
- BS-ISO-16075-4 - Guidelines for treated wastewater use for irrigation projects
- BS-ISO-16075-6 - Guidelines for treated wastewater use for irrigation projects
- BS-ISO-17273 - Waste management and reduction from aquaculture facilities in natural water bodies. Principles and guidelines
- BS-ISO-20426 - Guidelines for health risk assessment and management for non-potable water reuse
- BS-ISO-20468-2 - Guidelines for performance evaluation of treatment technologies for water reuse systems
- BS-ISO-20468-3 - Guidelines for performance evaluation of treatment technologies for water reuse systems
- BS-ISO-20468-8 - Guidelines for performance evaluation of treatment technologies for water reuse systems
- BS-ISO-20670 - Water reuse. Vocabulary
- BS-ISO-20760-1 - Water reuse in urban areas. Guidelines for centralized water reuse system
- BS-ISO-20760-2 - Water reuse in urban areas. Guidelines for centralized water reuse system
- BS-ISO-20761 - Water reuse in urban areas. Guidelines for water reuse safety evaluation. Assessment parameters and methods
- BS-ISO-21939-1 - A method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse
- BS-ISO-21939-2 - Method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse
- BS-ISO-22519 - Membrane-based generation of water for injection (WFI)
- BS-ISO-22519-TC - Tracked Changes. Membrane-based generation of water for injection (WFI)
- BS-ISO-23056 - Water reuse in urban areas. Guidelines for decentralized/onsite water reuse system. Design principles of a decentralized/onsite system
- BS-ISO-23070 - Water Reuse in Urban Areas. Guidelines for reclaimed water treatment: Design principles of a RO treatment system of municipal wastewater
- BS-ISO-23446 - Marine technology. Product water quality of seawater reverse osmosis (RO) desalination. Guidelines for municipal water supply
- BS-ISO-24297 - Guidelines for treatment and reuse of leachate from municipal solid waste (MSW) incineration plants
- BS-ISO-24416 - Water reuse in urban areas. Guidelines for water reuse safety evaluation. Stability evaluation of reclaimed water
- BS-ISO-24516-1 - Guidelines for the management of assets of water supply and wastewater systems
- BS-ISO-24516-2 - Guidelines for the management of assets of water supply and wastewater systems
- BS-ISO-24516-3 - Guidelines for the management of assets of water supply and wastewater systems
- BS-ISO-24516-4 - Guidelines for the management of assets of water supply and wastewater systems
- BS-ISO-24518 - Activities relating to drinking water and wastewater services. Crisis management of water utilities
- BS-ISO-24536 - Service activities relating to drinking water supply, wastewater and stormwater systems. Stormwater management. Guidelines for stormwater management in urban areas
- BS-ISO-24566-1 - Drinking water, wastewater and storm water systems and services. Adaptation of water services to climate change impacts
- BS-ISO-24566-2 - Drinking water, wastewater and stormwater systems and services. Adaptation of water services to climate change impacts.Stormwater services.
- BS-ISO-24575 - General principles and guidelines for cost analysis in planning of decentralized wastewater treatment and/or reuse
- BS-ISO-24591-1 - Smart water management
- BS-ISO-24591-2 - Smart water management
- BS-ISO-24595 - Drinking water, wastewater and stormwater systems and services. Guidelines for the provision of alternative water service for essential facilities during a crisis
- BS-ISO-46001 - Water efficiency management systems. Requirements with guidance for use
- BS-ISO-6107 - Water quality. Vocabulary
- BS-ISO-6107-2 - Water quality. Vocabulary
- BS-ISO-6107-3 - Water quality. Vocabulary
- BS-ISO-6107-7 - Water quality. Vocabulary
- BS-ISO-6107-8 - Water quality. Vocabulary
- BS-ISO-8466-1 - Water quality. Calibration and evaluation of analytical methods
- BS-ISO-9111 - Water reuse in urban areas. Guidelines for benefit evaluation of reclaimed water use.
- DD-ENV-ISO-13530 - Water quality. Guide to analytical quality control for water analysis
- ISO-16075-5 - Guidelines for treated wastewater use for irrigation projects - Part 5: Treated wastewater disinfection and equivalent treatments
- PD-CEN-ISO-8546 - Hand protection. Guidance for selection and use
- PD-ISO-24519 - Service activities relating to drinking water supply, wastewater and stormwater systems. Water and wastewater services for temporary settlements for displaced persons
- PD-ISO-24539 - Service activities relating to drinking water supply, wastewater and stormwater systems. Examples of good practices for stormwater management
- PD-ISO-24541 - Service activities relating to drinking water supply, wastewater and stormwater systems. Guidelines for the implementation of continuous monitoring systems for drinking water quality and operational parameters in drinking water distribution networks
ISO:
- ISO-13205 - Marine technology - Seawater desalination - Vocabulary
- ISO-14002-2 - Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water
- ISO-14017 - Environmental management - Requirements with guidance for verification and validation of water statements
- ISO-15839 - Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests
- ISO-16075-1 - Guidelines for treated wastewater use for irrigation projects - Part 1: The basis of a reuse project for irrigation
- ISO-16075-2 - Guidelines for treated wastewater use for irrigation projects - Part 2: Development of the project
- ISO-16075-3 - Guidelines for treated wastewater use for irrigation projects - Part 3: Components of a reuse project for irrigation
- ISO-16075-4 - Guidelines for treated wastewater use for irrigation projects - Part 4: Monitoring
- ISO-16075-6 - Guidelines for treated wastewater use for irrigation projects - Part 6: Fertilization
- ISO-17273 - Waste management and reduction from aquaculture facilities in natural water bodies - Principles and guidelines
- ISO-20426 - Guidelines for health risk assessment and management for non-potable water reuse
- ISO-20468-1 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 1: General
- ISO-20468-2 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 2: Methodology to evaluate performance of treatment systems on the basis of greenhouse gas emissions
- ISO-20468-3 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 3: Ozone treatment technology
- ISO-20468-4 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 4: UV Disinfection
- ISO-20468-5 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 5: Membrane filtration
- ISO-20468-6 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 6: Ion exchange and electrodialysis
- ISO-20468-7 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 7: Advanced oxidation processes technology
- ISO-20468-8 - Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 8: Evaluation of treatment systems based on life cycle cost
- ISO-20469 - Guidelines for water quality grade classification for water reuse
- ISO-20670 - Water reuse - Vocabulary
- ISO-20760-1 - Water reuse in urban areas - Guidelines for centralized water reuse system - Part 1: Design principle of a centralized water reuse system
- ISO-20760-2 - Water reuse in urban areas - Guidelines for centralized water reuse system - Part 2: Management of a centralized water reuse system
- ISO-20761 - Water reuse in urban areas - Guidelines for water reuse safety evaluation - Assessment parameters and methods
- ISO-21939-1 - A method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse - Part 1: Biological processes
- ISO-21939-2 - Method to calculate and express energy consumption of industrial wastewater treatment for the purpose of water reuse - Part 2: Accounting for energy recovery
- ISO-22519 - Membrane-based generation of water for injection (WFI)
- ISO-23056 - Water reuse in urban areas - Guidelines for decentralized/onsite water reuse system - Design principles of a decentralized/onsite system
- ISO-23070 - Water Reuse in Urban Areas - Guidelines for reclaimed water treatment: Design principles of a RO treatment system of municipal wastewater
- ISO-23446 - Marine technology - Product water quality of seawater reverse osmosis (RO) desalination - Guidelines for municipal water supply
- ISO-24297 - Guidelines for treatment and reuse of leachate from municipal solid waste (MSW) incineration plants
- ISO-24416 - Water reuse in urban areas - Guidelines for water reuse safety evaluation - Stability evaluation of reclaimed water
- ISO-24516-1 - Guidelines for the management of assets of water supply and wastewater systems - Part 1: Drinking water distribution networks
- ISO-24516-2 - Guidelines for the management of assets of water supply and wastewater systems - Part 2: Waterworks
- ISO-24516-3 - Guidelines for the management of assets of water supply and wastewater systems - Part 3: Wastewater collection networks
- ISO-24516-4 - Guidelines for the management of assets of water supply and wastewater systems - Part 4: Wastewater treatment plants, sludge treatment facilities, pumping stations, retention and detention facilities
- ISO-24518 - Activities relating to drinking water and wastewater services - Crisis management of water utilities
- ISO-24519 - Service activities relating to drinking water supply, wastewater and stormwater systems - Water and wastewater services for temporary settlements for displaced persons
- ISO-24528 - Service activities relating to drinking water supply, wastewater and stormwater systems - Guideline for a water loss investigation of drinking water distribution networks
- ISO-24536 - Service activities relating to drinking water supply, wastewater and stormwater systems - Stormwater management - Guidelines for stormwater management in urban areas
- ISO-24539 - Service activities relating to drinking water supply, wastewater and stormwater systems - Examples of good practices for stormwater management
- ISO-24541 - Service activities relating to drinking water supply, wastewater and stormwater systems - Guidelines for the implementation of continuous monitoring systems for drinking water quality and operational parameters in drinking water distribution networks
- ISO-24566-1 - Drinking water, wastewater and storm water systems and services - Adaptation of water services to climate change impacts - Part 1: Assessment principles
- ISO-24566-2 - Drinking water, wastewater and stormwater systems and services - Adaptation of water services to climate change impacts - Part 2: Stormwater services
- ISO-24575 - General principles and guidelines for cost analysis in planning of decentralized wastewater treatment and/or reuse
- ISO-24591-1 - Smart water management - Part 1: General guidelines and governance
- ISO-24595 - Drinking water, wastewater and stormwater systems and services - Guidelines for the provision of alternative water service for essential facilities during a crisis
- ISO-46001 - Water efficiency management systems - Requirements with guidance for use
- ISO-46001-AM1 - - Amendment 1: Water efficiency management systems - Requirements with guidance for use - Amendment 1: Climate action changes
- ISO-6107 - Water quality - Vocabulary
- ISO-6107-1 - Water quality - Vocabulary
- ISO-6107-2 - Water quality - Vocabulary
- ISO-6107-2-AM1 - Water quality - Vocabulary - Amendment 1
- ISO-6107-3 - Water quality - Vocabulary - Part 3
- ISO-6107-3-1 - Water quality - Vocabulary - Amendment 1
- ISO-6107-4 - Water quality - Vocabulary - Part 4
- ISO-6107-5 - Water quality - Vocabulary
- ISO-6107-6 - Water quality - Vocabulary
- ISO-6107-7 - Water quality - Vocabulary
- ISO-6107-8 - Water quality - Vocabulary - Part 8
- ISO-6107-8-1 - Water quality - Vocabulary - Amendment 1
- ISO-6107-9 - Water quality - Vocabulary - Part 9: Alphabetical list and subject index
- ISO-8466-1 - Water quality - Calibration and evaluation of analytical methods - Part 1: Linear calibration function
- ISO-8466-2 - Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions
- ISO-9111 - Water reuse in urban areas - Guidelines for benefit evaluation of reclaimed water use
Other SDOs:
- DIN-EN-15282 - Vitreous & Porcelain Enamels - Design of Bolted Steel Tanks for the Storage or Treatm
- EN-15282 - Vitreous & Porcelain Enamels - Design of Bolted Steel Tanks for the Storage or Treatm
- EN-ISO-15839 - Water Quality - On-Line Sensors/Analysing Equipment for Water - Specifications & Perfo
- ISO-24591-2 - Smart water management - Part 2: Data management guidelines
- IWA-6 - Guidelines for the management of drinking water utilities under crisis conditions
- JIS-K-0807 - Ultraviolet photometer for monitoring of water pollution
- SS-EN-12338 - Water quality - Determination of mercury - Enrichment methods by amalgamation
- SS-EN-12673 - Water quality - Gas chromatographic determination of some selected chlorophenols in water
- SS-EN-12918 - Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
- SS-EN-1444 - Fibre-cement pipelines - Guide for laying and on-site work practices
- SS-EN-15282 - Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- SS-EN-1899-1 - Water quality - Determination of biochemical oxygen demand after n days (BOD") - Part 1: Dilution and seeding method with allythiourea addition (ISO 5815:1989, modified)
- SS-EN-1899-2 - Water quality - Determination of biochemical oxygen demand after n days (BOD") - Part 2: Method for undiluted samples (ISO 5815:1989, modified)
- SS-EN-29439 - Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of released carbon dioxide
- SS-EN-29888 - Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Static method (Zahn-Wellens metod)
- SS-EN-805 - Water supply - Requirements for systems and components outside buildings
- SS-EN-903 - Water quality - Determination of anionic surfactants by measurement of the metylene blue index MBAS(ISO 7875-1:1984 modified)
- SS-EN-ISO-10301 - Water quality - Determination of highly volatile halogeneated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997)
- SS-EN-ISO-10304-1 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
- SS-EN-ISO-10304-3 - Water quality - Determination of dissolved anionsby liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997)
- SS-EN-ISO-10304-4 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
- SS-EN-ISO-10634 - Water quality - Preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634: 2018)
- SS-EN-ISO-10695 - Water quality - Determination of selected organic nitrogen and phosphorus compounds - Gas chromatographic methods (ISO 10695:2000)
- SS-EN-ISO-10707 - Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of biochemical oxygen demand (closed bottle test) (ISO 10707:1994)
- SS-EN-ISO-10712 - Water quality quality - Pseudomonas putida growthinhibition test (Pseudomonas cell multiplication inhibition test) (ISO 10 712:1995)
- SS-EN-ISO-11369 - Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
- SS-EN-ISO-11733 - Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004)
- SS-EN-ISO-11734 - Water quality - Evaluation of the "ultimate" anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995)
- SS-EN-ISO-11885 - Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
- SS-EN-ISO-11905-1 - Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997)
- SS-EN-ISO-11969 - Water quality - Determination of arsenic - Atomicabsorption spectrometric method (hydride technique) (ISO 11969:1996)
- SS-EN-ISO-12020 - Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997)
- SS-EN-ISO-12846 - Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)
- SS-EN-ISO-13395 - Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996)
- SS-EN-ISO-14002-2 - Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
- SS-EN-ISO-14402 - Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999)
- SS-EN-ISO-14911 - Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998)
- SS-EN-ISO-15839 - Water quality - On-line sensors/analysing equipment for water Specifications and performance tests (ISO 15839:2003)
- SS-EN-ISO-5667-13 - Water quality - Sampling - Part 13: Guidance on sampling of sludges (ISO 5667-13:2011)
- SS-EN-ISO-5667-19 - Water quality - Sampling - Part 19: Guidance on sampling of marine sediments (ISO 5667-19:2004)
- SS-EN-ISO-5667-3 - Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018)
- SS-EN-ISO-5961 - Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994)
- SS-EN-ISO-7346-1 - Water quality - Determination of the acute lethaltoxicity of substances to a freshwater fish (Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)) - Part 1: Static method (ISO 7346-1:1996)
- SS-EN-ISO-7346-2 - Water quality - Determination of the acute lethaltoxicity of substances to a freshwater fish (Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)) - Part 2: Semi-static method (ISO 7346-2:1996)
- SS-EN-ISO-7346-3 - Water quality - Determination of the acute lethaltoxicity of substances to a freshwater fish (Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)) - Part 3: Flow-through method (ISO 7346-3:1996)
- SS-EN-ISO-7393-1 - Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamÃne (ISO 7393-1:1985)
- SS-EN-ISO-7393-2 - Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)
- SS-EN-ISO-7393-3 - Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990)
- SS-EN-ISO-7827 - Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010)
- SS-EN-ISO-7887 - Water quality - Examination and determination of colour (ISO 7887:2011)
- SS-EN-ISO-7980 - Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986)
- SS-EN-ISO-8192 - Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation (ISO 8192:2007)
- SS-EN-ISO-8467 - Water quality - Determination of permanganate index (ISO 8467:1993)
- SS-EN-ISO-9408 - Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999)
- SS-EN-ISO-9439 - Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999)
- SS-EN-ISO-9887 - Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continous activated sludge method (SCAS) (ISO 9887:1992)
- SS-EN-ISO-9888 - Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method) (ISO 9888:1999)
- SS-EN-ISO-9963-1 - Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity (ISO 9963-1:1994)
- SS-EN-ISO-9963-2 - Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994)
- SS-ISO-10634 - Water quality - Guidance for the preparation and treatment of poorly water soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueus medium
- SS-ISO-22519 - Membrane-based generation of water for injection (WFI) (ISO 22519:2023, IDT)
- SS-ISO-24516-1 - Guidelines for the management of assets of water supply and wastewater systems — Part 1: Drinking water distribution networks (ISO 24516-1:2016, IDT)
- SS-ISO-24516-2 - Guidelines for the management of assets of water supply and wastewater systems - Part 2: Waterworks (ISO 24516-2:2019, IDT)
- SS-ISO-24516-3 - Guidelines for the management of assets of water supply and wastewater systems - Part 3: Wastewater collection networks (ISO 24516-3:2017, IDT)
- SS-ISO-24516-4 - Guidelines for the management of assets of water supply and wastewater systems - Part 4: Wastewater treatment plants, sludge treatment facilities, pumping stations, retention and detention facilities (ISO 24516-4:2019, IDT)