Document Center List of Standards on Transport Exhaust Emissions
ICS Code 13.040.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6522 - Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
- ASTM-D6877 - Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
BSI:
- BS-EN-50545-1 - Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels
- BS-EN-ISO-18854 - Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
- BS-EN-ISO-8178-6 - Part 6: Report of Measuring Results and Tests
- BS-ISO-15031-3 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-3-TC - Tracked Changes. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-4 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-5 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-5-TC - Tracked Changes. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-6 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-6-TC - Tracked Changes. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-7 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-16232 - Road vehicles. Cleanliness of components and systems
- BS-ISO-16232-1 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-10 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-2 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-3 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-4 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-5 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-6 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-7 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-8 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-9 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-17479 - Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS-ISO-19449 - Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS-ISO-21755-1 - Motorcycles. Measurement method for evaporative emissions
- BS-ISO-21755-2 - Motorcycles. Measurement method for evaporative emissions
- BS-ISO-23795-1 - Intelligent transport systems. Extracting trip data via nomadic device for estimating CO2 emissions
- BS-ISO-23795-2 - Intelligent transport systems. Extracting trip data using nomadic and mobile devices for estimating CO2 emissions
- BS-ISO-6460-1 - Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption
- BS-ISO-6460-2 - Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption
- BS-ISO-6460-3 - Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption
- BS-ISO-6855-1 - Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption
- BS-ISO-6855-2 - Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption
- BS-ISO-6855-3 - Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption
- BS-ISO-8178-1 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-10 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-11 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-1-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-2 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-2-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-4 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-5 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-5-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-6 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-7 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-7-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-8 - Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-8-TC - Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement
- BS-ISO-8178-9 - Reciprocating internal combustion engines. Exhaust emission measurement
- DD-ISO/PAS-22241-1 - Diesel engines. NOx reduction agent AUS 32
- PD-CEN-17378 - Intelligent transport systems. Urban ITS. Air quality management in urban areas
ISO:
- ISO-10054 - Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
- ISO-11614 - Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- ISO-15031-1 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition
- ISO-15031-2 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms
- ISO-15031-3 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
- ISO-15031-4 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment
- ISO-15031-5 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
- ISO-15031-6 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
- ISO-15031-7 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security
- ISO-16183 - Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- ISO-16232 - Road vehicles - Cleanliness of components and systems
- ISO-16232-1 - Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary
- ISO-16232-10 - Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results
- ISO-16232-2 - Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation
- ISO-16232-3 - Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing
- ISO-16232-4 - Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques
- ISO-16232-5 - Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench
- ISO-16232-6 - Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
- ISO-16232-7 - Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
- ISO-16232-8 - Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
- ISO-16232-9 - Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
- ISO-17479 - Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
- ISO-18854 - Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
- ISO-19449 - Mopeds - Measurement methods for gaseous exhaust emissions during inspection or maintenance
- ISO-21755-1 - Motorcycles - Measurement method for evaporative emissions - Part 1: SHED test procedure
- ISO-21755-2 - Motorcycles - Measurement method for evaporative emissions - Part 2: Permeation test procedure
- ISO-23795-1 - Intelligent transport systems - Extracting trip data using nomadic and mobile devices for estimating C02 emissions - Part 1: Fuel consumption determination for fleet management
- ISO-3929 - Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance
- ISO-3930 - Instruments for measuring vehicle exhaust emissions
- ISO-3930-1 - Amendment 1: Instruments for Measuring Vehicle Exhaust Emissions
- ISO-6460 - Road vehicles - Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine
- ISO-6460-1 - Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
- ISO-6460-1-AM1 - - Amendment 1
- ISO-6460-2 - Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
- ISO-6460-3 - Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
- ISO-6460-3-AM1 - - Amendment 1
- ISO-6460-3-AM2 - - Amendment 2: Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed - Amendment 2
- ISO-6855 - Road vehicles - Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine
- ISO-6855-1 - Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
- ISO-6855-2 - Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
- ISO-6855-3 - Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
- ISO-6970 - Motorcycles and mopeds - Pollution tests - Chassis dynamometer bench
- ISO-789-4 - Agricultural tractors -- Test procedures -- Part 4: Measurement of exhaust smoke
- ISO-8178-1 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
- ISO-8178-10 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
- ISO-8178-11 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
- ISO-8178-2 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
- ISO-8178-3 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
- ISO-8178-4 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
- ISO-8178-5 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
- ISO-8178-6 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
- ISO-8178-7 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
- ISO-8178-8 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
- ISO-8178-9 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
- ISO-8178-9-1 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditionsAmendment 1
- ISO-9310 - Road vehicles - Smoke measurement of compression-ignition (diesel) engines - Survey of short in-service tests
- ISO/DIS-6460-1 - Part 1: General Test Requirements, Motorcycles - Measurement Method for Gaseous Exhaus
- ISO/DIS-6460-2 - Part 2: Test Cycles and Specific Test Conditions, Motorcycles - Measurement Method For
- ISO/DIS-6460-3 - Part 3: Fuel Consumption Measurement at a Constant Speed, Motorcycles - Measurement Me
- ISO/PAS-3930 - Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
Other SDOs:
- EN-50545-1 - Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
- ISO-17479-AM1 - - Amendment 1
- JIS-B-8008-9 - Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
- JIS-D-1044 - Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
- SIS-ISO/PAS-3930 - Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
- SIS-ISO/TR-15031-2 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Terms, definitions, abbreviations and acronyms
- SS-EN-13444-1 - Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermal electric hybrid vehicles
- SS-EN-1459-9 - Rough-terrain trucks - Safety requirements and verification - Part 9: Variable-reach trucks equipped with work platforms having a front guard that can be opened
- SS-EN-ISO-18854 - Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
- SS-EN-ISO-8178-5 - Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997)
- SS-ISO-10054 - Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
- SS-ISO-11614 - Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- SS-ISO-15031-1 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition (ISO 15031-1:2010, IDT)
- SS-ISO-15031-2 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Guidance on terms, definitions, abbreviations and acronyms (ISO 15031-2:2010, IDT)
- SS-ISO-15031-3 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use (ISO 15031-3:2016, IDT)
- SS-ISO-15031-4 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment (ISO 15031-4:2014, IDT)
- SS-ISO-15031-5 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services (ISO 15031-5:2015, IDT)
- SS-ISO-15031-6 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions (ISO 15031-6:2015, IDT)
- SS-ISO-15031-7 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security (ISO 15031-7:2013, IDT)
- SS-ISO-16183 - Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- SS-ISO-16232 - Road vehicles - Cleanliness of components and systems (ISO 16232:2018, IDT)
- SS-ISO-16232-1 - Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary (ISO 16232-1:2007, IDT)
- SS-ISO-16232-10 - Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results (ISO 16232-10:2007, IDT)
- SS-ISO-16232-2 - Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation (ISO 16232-2:2007, IDT)
- SS-ISO-16232-3 - Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing (ISO 16232-3:2007, IDT)
- SS-ISO-16232-4 - Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques (ISO 16232-4:2007, IDT)
- SS-ISO-16232-5 - Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench (ISO 16232-5:2007, IDT)
- SS-ISO-16232-6 - Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis (ISO 16232-6:2007, IDT)
- SS-ISO-16232-7 - Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis (ISO 16232-7:2007, IDT)
- SS-ISO-16232-8 - Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis (ISO 16232-8:2007, IDT)
- SS-ISO-16232-9 - Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter (ISO 16232-9:2007, IDT)
- SS-ISO-3929 - Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (ISO 3929:2003, IDT)
- SS-ISO-3930 - Instruments for measuring vehicle exhaust emissions (ISO 3930:2000, IDT)