Document Center List of Standards on Workplace Atmospheres Air Quality Of Surgery Rooms, See 11.080.01
ICS Code 13.040.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D3586 - Test Method for Chromium in Workplace Atmospheres (Colorimetric Method) (Withdrawn 1990)
- ASTM-D3824 - Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by Chemiluminescence
- ASTM-D4185 - Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
- ASTM-D4413 - Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) (Withdrawn 2014)
- ASTM-D4597 - Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM-D4600 - Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM-D4765 - Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
- ASTM-D4766 - Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
- ASTM-D4856 - Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
- ASTM-D4861 - Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
- ASTM-D5156 - Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM-D5281 - Standard Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres (Withdrawn 2014)
- ASTM-D5578 - Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024)
- ASTM-D5836 - Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
- ASTM-D5932 - Standard Test Method for Determination of 2,4-Toluene Di
iso cyanate (2,4-TDI) and 2,6-Toluene Diiso cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace - ASTM-D6056 - Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020)
- ASTM-D6057 - Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020)
- ASTM-D6058 - Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
- ASTM-D6059 - Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020)
- ASTM-D6246 - Standard Practice for Evaluating the Performance of Diffusive Samplers
- ASTM-D6494 - Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM-D6561 - Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
- ASTM-D6562 - Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
- ASTM-D6785 - Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6832 - Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
- ASTM-D6966 - Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
- ASTM-D7200 - Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy (Withdrawn 2021)
- ASTM-D7201 - Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
- ASTM-D7202 - Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
- ASTM-D7393 - Standard Practice for Indicating Oil in Abrasives
- ASTM-D7439 - Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
- ASTM-D7659 - Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
- ASTM-D7770 - Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
- ASTM-D7773 - Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO
3 ) Using Filter Sampling and Suppressed Ion Chromatography - ASTM-D7822 - Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
- ASTM-D7948 - Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
- ASTM-E1058 - Standard Test Methods for the Toxic Contamination of the Environment in the Operator Enclosure of Self-Propelled Agriculture Vehicles (Withdrawn 2010)
- ASTM-E1132 - Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
- ASTM-E1370 - Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
- ASTM-E1553 - Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)
- ASTM-E1576 - Standard Guide for Medical Surveillance Program for Workers with Occupational Exposure to Respirable Silicon Carbide Whiskers (Withdrawn 2008)
- ASTM-E2144 - Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
- ASTM-E2625 - Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
- ASTM-E2889 - Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
- ASTM-E884 - Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities (Withdrawn 2021)
- ASTM-F25 - Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
- ASTM-F318 - Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
- ASTM-F50 - Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM-F91 - Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
- ASTM-PS42 - Withdrawn 1998
- ASTM-PS94 - Provisional Practice for Personal Sampling and Analysis of Endotoxin in Metal Removal Fluid Aerosols in Workplace Atmospheres (Withdrawn 2001)
BSI:
- BS-5295-0 - Environmental cleanliness in enclosed spaces
- BS-5295-1 - Environmental cleanliness in enclosed spaces. Specification for controlled environment clean rooms, work stations and clean air devices
- BS-5295-2 - Environmental cleanliness in enclosed spaces. Method for specifying the design, construction and commissioning of clean rooms and clean air devices
- BS-5295-3 - Environmental cleanliness in enclosed spaces. Guide to operational procedures and disciplines applicable to clean rooms and clean air devices
- BS-5295-4 - Environmental cleanliness in enclosed spaces. Specification for monitoring clean rooms and clean air devices to prove continued compliance with BS 5295:Part 1
- BS-5343 - Specification. Gas detector tubes
- BS-5343-1 - Gas detector tubes. Specification for short term gas detector tubes
- BS-5343-2 - Gas detector tubes. Specification for long term gas detector tubes
- BS-6069-3.2 - Characterization of Air Quality, Workplace Atmospheres, Method for the Determination O
- BS-6069-3.3 - Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous chlorinated hydrocarbons by charcoal tube/solvent desorption/gas chromatography
- BS-6069-3.4 - Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous aromatic hydrocarbons by charcoal tube/solvent desorption/gas chromatography
- BS-7989 - Specification for recirculatory filtration fume cupboards
- BS-EN-1076 - Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods
- BS-EN-1231 - Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods
- BS-EN-1232 - Workplace atmospheres. Pumps for personal sampling of chemical agents. Requirements and test methods
- BS-EN-12919 - Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods
- BS-EN-13098 - Workplace exposure. Measurement of airborne microorganisms and microbial compounds. General requirements
- BS-EN-13205 - Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations
- BS-EN-13205-1 - Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
- BS-EN-13205-2 - Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
- BS-EN-13205-4 - Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
- BS-EN-13205-5 - Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
- BS-EN-13205-6 - Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
- BS-EN-13890 - Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods
- BS-EN-13936 - Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods
- BS-EN-14031 - Workplace exposure. Quantitative measurement of airborne endotoxins
- BS-EN-14042 - Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents
- BS-EN-14530 - Workplace atmospheres. Determination of diesel particulate matter. General requirements
- BS-EN-14583-TC - Tracked Changes. Workplace exposure. Volumetric bioaerosol samplers. General requirements and evaluation of performance
- BS-EN-15051 - Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods
- BS-EN-15051-2 - Workplace exposure. Measurement of the dustiness of bulk materials
- BS-EN-1540 - Workplace exposure. Terminology
- BS-EN-1540-TC - Tracked Changes. Workplace exposure. Terminology
- BS-EN-16897 - Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters
- BS-EN-16966 - Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
- BS-EN-17058 - Workplace exposure. Assessment of exposure by inhalation of nano-objects and their aggregates and agglomerates
- BS-EN-17199-1 - Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles
- BS-EN-17199-2 - Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles
- BS-EN-17199-3 - Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles
- BS-EN-17199-4 - Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles
- BS-EN-17199-5 - Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles
- BS-EN-17289-1 - Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content
- BS-EN-17289-2 - Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content
- BS-EN-17289-3 - Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content
- BS-EN-45544-1 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-1-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-2 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-2-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-3 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-3-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-4 - Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-45544-4-TC - Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours
- BS-EN-482 - Workplace exposure. Procedures for the determination of the concentration of chemical agents. Basic performance requirements
- BS-EN-689 - Workplace exposure. Measurement of exposure by inhalation to chemical agents. Strategy for testing compliance with occupational exposure limit values
- BS-EN-838 - Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods
- BS-EN-IEC-62990-2 - Workplace atmospheres
- BS-EN-ISO-10882-1 - Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-10882-1-TC - Tracked Changes. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-10882-2 - Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-10882-2-TC - Tracked Changes. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone
- BS-EN-ISO-13137 - Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods
- BS-EN-ISO-13137-TC - Tracked Changes. Workplace atmospheres. Pumps for personal sampling of chemical and biological agents. Requirements and test methods
- BS-EN-ISO-14644-4 - Cleanrooms and associated controlled environments
- BS-EN-ISO-14644-4-TC - Tracked Changes. Cleanrooms and associated controlled environments
- BS-EN-ISO-15011-1 - Health and safety in welding and allied processes. Laboratory method for sampling fume and gases
- BS-EN-ISO-15011-2 - Health and safety in welding and allied processes. Laboratory method for sampling fume and gases
- BS-EN-ISO-15011-3 - Health and safety in welding and allied processes. Laboratory method for sampling fume and gases
- BS-EN-ISO-15011-5 - Health and safety in welding and allied processes. Laboratory method for sampling fume and gases
- BS-EN-ISO-16017-1 - Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography
- BS-EN-ISO-17621 - Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods
- BS-EN-ISO-22065 - Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using pumped samplers
- BS-EN-ISO-23320 - Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
- BS-EN-ISO-23320-TC - Tracked Changes. Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
- BS-EN-ISO-23861 - Workplace air. Chemical agent present as a mixture of airborne particles and vapour. Requirements for evaluation of measuring procedures using samplers
- BS-EN-ISO-23875 - Mining. Air quality control systems for operator enclosures. Performance requirements and test methods
- BS-EN-ISO-27548 - Additive manufacturing of plastics. Environment, health, and safety. Test method for determination of particle and chemical emission rates from desktop material extrusion 3D printer
- BS-EN-ISO/ASTM-52933 - Additive manufacturing. Environment, health and safety. Test method for the hazardous substances emitted from material extrusion type 3D printers in the non-industrial places
- BS-ISO-11174 - Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
- BS-ISO-11174-TC - Tracked Changes. Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
- BS-ISO-14382 - Workplace atmospheres. Determination of toluene diisocyanate vapours using 1-(2-pyridyl) piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
- BS-ISO-15202-1 - Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry
- BS-ISO-15202-2 - Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry
- BS-ISO-15202-3 - Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry
- BS-ISO-15767 - Workplace atmospheres. Controlling and characterizing uncertainty in weighing collected aerosols
- BS-ISO-16107 - Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
- BS-ISO-16200-1 - Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography
- BS-ISO-16200-2 - Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography
- BS-ISO-16258-1 - Workplace air. Analysis of respirable crystalline silica by X-ray diffraction
- BS-ISO-16258-2 - Workplace air. Analysis of respirable crystalline silica by X-ray diffraction
- BS-ISO-16702 - Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography
- BS-ISO-17091 - Workplace air. Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide. Method by measurement of corresponding cations by suppressed ion chromatography
- BS-ISO-17733 - Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- BS-ISO-17733-TC - Tracked Changes. Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- BS-ISO-17734-1 - Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry
- BS-ISO-17734-2 - Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry
- BS-ISO-17735 - Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography
- BS-ISO-18158 - Workplace air. Terminology
- BS-ISO-19087 - Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- BS-ISO-20552 - Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- BS-ISO-20581 - Workplace air. General requirements for the performance of procedures for the measurement of chemical agents
- BS-ISO-21438-1 - Workplace atmospheres. Determination of inorganic acids by ion chromatography
- BS-ISO-21438-1-TC - Tracked Changes. Workplace atmospheres. Determination of inorganic acids by ion chromatography
- BS-ISO-21438-2 - Workplace atmospheres. Determination of inorganic acids by ion chromatography
- BS-ISO-21832 - Workplace air. Metals and metalloids in airborne particles. Requirements for evaluation of measuring procedures
- BS-ISO-23875 - Mining. Air quality control systems for operator enclosures. Performance requirements and test methods
- BS-ISO-24095 - Workplace air. Guidance for the measurement of respirable crystalline silica
- BS-ISO-24095-TC - Tracked Changes. Workplace air. Guidance for the measurement of respirable crystalline silica
- BS-ISO-6323-1 - Workplace air. Determination of arsenic and arsenic compounds by electrothermal atomic absorption spectrometry.Arsenic and arsenic compounds, except arsine by ET-AAS.
- BS-ISO-8672 - Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
- DD-ENV-13936 - Workplace Atmospheres - Measurement of Chemical Agents Present as Mixtures of Airborne Par
- PD-6609 - Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing
- PD-CEN-13205-3 - Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
- PD-CEN-15230 - Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions
- PD-CEN-16013-1 - Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring
- PD-CEN-16013-2 - Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring
- PD-CEN-16013-3 - Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring
- PD-CEN-17055 - Workplace exposure. Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936. Choice of procedures
- PD-CEN-ISO-21623 - Workplace exposure. Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA) (ISO/TS 21623:2017)
- PD-ISO-14294 - Workplace atmospheres. Measurement of dermal Exposure. Principles and methods
- PD-ISO-17737 - Workplace atmospheres. Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
- PD-ISO-27628 - Workplace atmospheres. Ultrafine, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
ISO:
- ISO-11041 - Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry
- ISO-11174 - Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method
- ISO-13137 - Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods
- ISO-14294 - Workplace atmospheres - Measurement of dermal exposure - Principles and methods
- ISO-14382 - Workplace atmospheres - Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
- ISO-15202-1 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
- ISO-15202-2 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
- ISO-15202-3 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
- ISO-15767 - Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols
- ISO-16107 - Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers
- ISO-16200-1 - Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method
- ISO-16200-2 - Workplace air quality -- Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography -- Part 2: Diffusive sampling method
- ISO-16258-1 - Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 1: Direct-on-filter method
- ISO-16258-2 - Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 2: Method by indirect analysis
- ISO-16702 - Workplace air quality - Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography
- ISO-16740 - Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
- ISO-17091 - Workplace air - Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide - Method by measurement of corresponding cations by suppressed ion chromatography
- ISO-17621 - Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods
- ISO-17733 - Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO-17734-1 - Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry - Part 1: Isocyanates using dibutylamine derivatives
- ISO-17734-2 - Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry - Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives
- ISO-17735 - Workplace atmospheres - Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography
- ISO-17736 - Workplace air quality - Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
- ISO-17737 - Workplace atmospheres - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
- ISO-18158 - Workplace air - Terminology
- ISO-19087 - Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- ISO-20552 - Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
- ISO-20581 - Workplace air - General requirements for the performance of procedures for the measurement of chemical agents
- ISO-21438-1 - Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 1: Non-volatile acids (sulfuric acid and phosphoric acid)
- ISO-21438-2 - Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)
- ISO-21438-3 - Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 3: Hydrofluoric acid and particulate fluorides
- ISO-21623 - Workplace exposure - Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA)
- ISO-21832 - Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures
- ISO-22065 - Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
- ISO-23320 - Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers
- ISO-23506 - Workplace air - Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier - Transform infrared spectroscopy
- ISO-23861 - Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers
- ISO-23875 - Mining - Air quality control systems for operator enclosures - Performance requirements and test methods
- ISO-23875-AM1 - - Amendment 1: Mining - Air quality control systems for operator enclosures - Performance requirements and test methods - Amendment 1
- ISO-24095 - Workplace air - Guidance for the measurement of respirable crystalline silica
- ISO-27548 - Additive manufacturing of plastics - Environment, health, and safety - Test method for determination of particle and chemical emission rates from desktop material extrusion 3D printer
- ISO-27628 - Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment
- ISO-28439 - Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems
- ISO-30011 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
- ISO-6323-1 - Workplace air - Determination of arsenic and arsenic compounds by electrothermal atomic absorption spectrometry - Part 1: Arsenic and arsenic compounds, except arsine by ET-AAS
- ISO-8518 - Workplace air - Determination of particulate lead and lead compounds - Flame and electrothermal atomic absorption spectrometric methods
- ISO-8672 - Air quality - Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy - Membrane filter method
- ISO-8760 - Work-place air - Determination of mass concentration of carbon monoxide - Method using detector tubes for short-term sampling with direct indication
- ISO-8761 - Work-place air - Determination of mass concentration of nitrogen dioxide - Method using detector tubes for short-term sampling with direct indication
- ISO-8762 - Workplace air - Determination of vinyl chloride - Charcoal tube/gas chromatographic method
- ISO-9486 - Workplace air - Determination of vaporous chlorinated hydrocarbons - Charcoal tube/solvent desorption/gas chromatographic method
- ISO-9487 - Workplace air - Determination of vaporous aromatic hydrocarbons - Charcoal tube/solvent desorption/gas chromatographic method
- ISO/ASTM-52933 - Additive manufacturing - Environment, health and safety - Test method for the hazardous substances emitted from material extrusion type 3D printers in the non-industrial places
- ISO/DIS-15767 - Workplace Atmospheres - Controlling & Characterizing Errors in Weighing Collected Aer
Other SDOs:
- DIN-EN-13205 - Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
- DIN-EN-13890 - Workplace Exposure - Procedures for Measuring Metals and Metalloids in Airborne Particul
- DIN-EN-14530 - Workplace Atmospheres, Determination of Diesel Particulate Matter, General Requirement
- DIN-EN-14583 - Workplace Atmospheres, Volumetric Bioaerosol Sampling Devices, Requirements & Test Met
- DIN-EN-15051 - Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods; German version EN 15051:2006
- DIN-EN-482 - Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements; German version EN 482:2021
- DIN-ISO-15767 - Workplace Atmospheres - Controlling & Characterizing Uncertainty in Weighing Collected
- EN-1076 - Workplace Exposure - Procedures for Measuring Gases & Vapours Using Pumped Samplers -
- EN-1231 - Workplace Atmospheres, Short Term Detector Tube Measurement Systems, Requirements & T
- EN-1232 - Workplace Atmospheres, Pumps for Personal Sampling of Chemical Agents, Requirements &
- EN-13205-1 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
- EN-13205-2 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
- EN-13205-4 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
- EN-13205-5 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
- EN-13205-6 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
- EN-13890 - Workplace Exposure - Procedures for Measuring Metals & Metalloids in Airborne Particul
- EN-13936 - Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods
- EN-14042 - Workplace Atmospheres, Guide for the Application & Use of Procedures for the Assessmen
- EN-14583 - Workplace Atmospheres, Volumetric Bioaerosol Sampling Devices, Requirements & Test Met
- EN-15051 - Workplace Atmospheres - Measurement of the Dustiness of Bulk Materials - Requirements
- EN-15051-1 - Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods
- EN-15051-2 - Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method
- EN-15051-3 - Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method
- EN-1540 - Workplace exposure - Terminology
- EN-16897 - Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
- EN-16966 - Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
- EN-17058 - Workplace exposure - Assessment of exposure by inhalation of nano-objects and their aggregates and agglomerates
- EN-17199-1 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles - Part 1: Requirements and choice of test methods
- EN-17199-2 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 2: Rotating drum method
- EN-17199-3 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 3: Continuous drop method
- EN-17199-4 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 4: Small rotating drum method
- EN-17199-5 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5: Vortex shaker method
- EN-45544-1 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
- EN-45544-2 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement
- EN-45544-3 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection
- EN-45544-4 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
- EN-482 - Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
- EN-838 - Workplace Exposure - Procedures for Measuring Gases & Vapours Using Diffusive Samplers
- EN-ISO-13137 - Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
- EN-ISO-15011-1 - Part 1: Determination of Fume Emission Rate During Arc Welding & Collection of Fume Fo
- EN-ISO-15011-2 - Part 2: Determination of the Emission Rates of Carbon Monoxide (Co), Carbon Dioxide (C
- EN-ISO-15011-3 - Part 3: Determination of Ozone Emission Rate During Arc Welding, Health & Safety in We
- EN-ISO-17621 - Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods
- EN-ISO-22065 - Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2019)
- EN-ISO-28439 - Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems
- JIS-A-8330-2 - Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter test
- SIS-CEN/TR-13205-3 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
- SIS-CEN/TR-15230 - Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions
- SIS-CEN/TR-15547 - Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
- SIS-CEN/TR-16013-1 - Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications
- SIS-CEN/TR-16013-2 - Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- SIS-CEN/TR-16013-3 - Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- SIS-CEN/TR-17055 - Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936 - Choice of procedures
- SIS-ISO/TR-14294 - Workplace atmospheres - Measurement of dermal exposure - Principles and methods (ISO/TR 14294:2011, IDT)
- SIS-ISO/TR-17737 - Workplace air - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air (ISO/TR 17737:2007, IDT)
- SIS-ISO/TR-27628 - Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment (ISO/TR 27628:2007, IDT)
- SS-EN-1076 - Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
- SS-EN-1231 - Work place atmospheres - Short term detector tubemeasurement systems - Requirements and test methods
- SS-EN-1232 - Work place atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods
- SS-EN-12919 - Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods
- SS-EN-13098 - Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements
- SS-EN-13205 - Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
- SS-EN-13205-1 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
- SS-EN-13205-2 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
- SS-EN-13205-4 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
- SS-EN-13205-5 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
- SS-EN-13205-6 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
- SS-EN-13890 - Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
- SS-EN-13936 - Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods
- SS-EN-14031 - Workplace exposure - Quantitative measurement of airborne endotoxins
- SS-EN-14042 - Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents
- SS-EN-14530 - Workplace atmospheres - Determination of diesel particulate matter - General requirements
- SS-EN-14583 - Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
- SS-EN-15051 - Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
- SS-EN-15051-1 - Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods
- SS-EN-15051-2 - Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method
- SS-EN-15051-3 - Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method
- SS-EN-1540 - Workplace exposure - Terminology
- SS-EN-16897 - Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
- SS-EN-16966 - Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
- SS-EN-17058 - Workplace exposure - Assessment of exposure by inhalation of nano-objects and their aggregates and agglomerates
- SS-EN-17199-1 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles - Part 1: Requirements and choice of test methods
- SS-EN-17199-2 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 2: Rotating drum method
- SS-EN-17199-3 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 3: Continuous drop method
- SS-EN-17199-4 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 4: Small rotating drum method
- SS-EN-17199-5 - Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5: Vortex shaker method
- SS-EN-17289-1 - Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods
- SS-EN-17289-2 - Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
- SS-EN-17289-3 - Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
- SS-EN-27243 - Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (ISO 7243:1989)
- SS-EN-27726 - Thermal environments - Instruments and methods for measuring physical quantities (ISO 7726:1985)
- SS-EN-45544-1 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
- SS-EN-45544-2 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement
- SS-EN-45544-3 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection
- SS-EN-45544-4 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
- SS-EN-481 - Workplace atmospheres - Size fraction definitionsfor measurement of airborne particles
- SS-EN-482 - Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
- SS-EN-689 - Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values
- SS-EN-838 - Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
- SS-EN-ISO-10882-2 - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
- SS-EN-ISO-13137 - Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2022)
- SS-EN-ISO-14644-1 - Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
- SS-EN-ISO-14644-17 - Cleanrooms and associated controlled environments - Part 17: Particle deposition rate applications (ISO 14644-17:2021)
- SS-EN-ISO-14644-2 - Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015)
- SS-EN-ISO-14644-4 - Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2022)
- SS-EN-ISO-16000-19 - Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012)
- SS-EN-ISO-16000-32 - Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants (ISO 16000-32:2014)
- SS-EN-ISO-17621 - Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015)
- SS-EN-ISO-22065 - Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
- SS-EN-ISO-23320 - Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
- SS-EN-ISO-23861 - Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
- SS-EN-ISO-23875 - Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021)
- SS-EN-ISO-23875-AM1 - Mining — Air quality control systems for operator enclosures — Performance requirements and test methods — Amendment 1
- SS-EN-ISO-28439 - Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determining of the size distribution and number concentration using differential electrical mobility analysing systems (ISO 28439:2011)
- SS-EN-ISO-3104 - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
- SS-EN-ISO-7243 - Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017)
- SS-ISO-11174 - Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method (ISO 11174:1996, IDT)
- SS-ISO-14164 - Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated metho
- SS-ISO-14382 - Workplace atmospheres - Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors (ISO 14382:2012, IDT)
- SS-ISO-15202-1 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling (ISO 15202-1:2020, IDT)
- SS-ISO-15202-2 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation (ISO 15202-2:2020, IDT)
- SS-ISO-15202-3 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis (ISO 15202-3:2004, IDT)
- SS-ISO-15767 - Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols (ISO 15767:2009, IDT)
- SS-ISO-16000-27 - Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014, IDT)
- SS-ISO-16000-29 - Indoor air - Part 29: Test methods for VOC detectors (ISO 16000-29:2014, IDT)
- SS-ISO-16000-30 - Indoor air - Part 30: Sensory testing of indoor air (ISO 16000-30:2014, IDT)
- SS-ISO-16000-31 - Indoor air - Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds - Phosphoric acid ester (ISO 16000-31:2014, IDT)
- SS-ISO-16107 - Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers (ISO 16107:2007, IDT)
- SS-ISO-16200-1 - Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method
- SS-ISO-16200-2 - Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method
- SS-ISO-16258-1 - Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 1: Direct-on-filter method (ISO 16258-1:2015, IDT)
- SS-ISO-16258-2 - Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 2: Method by indirect analysis (ISO 16258-2:2015, IDT)
- SS-ISO-16702 - Workplace air quality - Determination of total organic isocyanate groups in air using the 1-(2-methoxyphenyl)piperazine and liquid chromatography (ISO 16702:2007, IDT)
- SS-ISO-16740 - Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide (ISO 16740:2005, IDT)
- SS-ISO-17733 - Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry (ISO 17733:2015, IDT)
- SS-ISO-17735 - Workplace atmospheres - Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography (ISO 17735:2019, IDT)
- SS-ISO-17736 - Workplace air quality - Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography (ISO 17736:2010, IDT)
- SS-ISO-19087 - Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy (ISO 19087:2018, IDT)
- SS-ISO-20552 - Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry (ISO 20552:2007, IDT)
- SS-ISO-21438-1 - Workplace atmospheres Determination of inorganic acids by ion chromatography Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) (ISO 21438-1:2022, IDT)
- SS-ISO-21438-2 - Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) (ISO 21438-2:2009, IDT)
- SS-ISO-21438-3 - Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 3: Hydrofluoric acid and particulate fluorides (ISO 21438-3:2010, IDT)
- SS-ISO-23506 - Workplace air Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier Transform infrared spectroscopy (ISO 23506:2021, IDT)
- SS-ISO-24095 - Workplace air Guidance for the measurement of respirable crystalline silica (ISO 24095:2021, IDT)
- SS-ISO-30011 - Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry (ISO 30011:2010, IDT)
- SS-ISO-8518 - Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method (ISO 8518:2022, IDT)
- SS-ISO-8760 - Work-place air - Determination of mass concentration of carbon monoxide - Method using detector tubes for short-term sampling with direct indication
- SS-ISO-8761 - Work-place air - Determination of mass concentration of nitrogen dioxide - Method using detector tubes for short-term sampling with direct indication
- SS-ISO-8762 - Work-place air - Determination of vinyl chloride - Charcoal tube/gaschromatographic method
- STG-TR-107 - Workplace atmospheres - Scientific basis to describe the influence of the reference period on the presentation of exposure data
- UNE-EN-482 - Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents
- UNE-EN-ISO-17621 - Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods