Document Center List of Standards on Liquid Wastes. Sludge Sewage Water Disposal And Treatment, See 13.060.30
ICS Code 13.030.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1589 - Methods of Test for Dissolved Oxygen in Waste Water (Withdrawn 1980)
- ASTM-D5209 - Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004)
- ASTM-D5210 - Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2016)
- ASTM-D5495 - Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)
- ASTM-D6699 - Standard Practice for Sampling Liquids Using Bailers
- ASTM-D6759 - Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
- ASTM-D7066 - Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
- ASTM-D7243 - Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
- ASTM-D8174 - Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
- ASTM-D8175 - Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
- ASTM-F2283 - Standard Specification for Shipboard Oil Pollution Abatement System
- ASTM-F2363 - Standard Specification for Sewage and Graywater Flow Through Treatment Systems
BSI:
- BS-EN-12457-1 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12457-2 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12457-3 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12457-4 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12832 - Characterisation of sludges. Utilisation and disposal of sludges. Vocabulary
- BS-EN-12879 - Characterization of sludges. Determination of the loss of ignition of dry mass
- BS-EN-12880 - Characterization of sludges. Determination of dry residue and water content
- BS-EN-13342 - Characterization of sludges. Determination of Kjeldahl nitrogen
- BS-EN-13346 - Characterization of sludges. Determination of trace elements and phosphorous. Aqua regia extraction methods
- BS-EN-14671 - Characterization of sludges. Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
- BS-EN-14672 - Characterization of sludges. Determination of total phosphorous
- BS-EN-14701-1 - Characterization of sludges. Filtration properties
- BS-EN-14701-2 - Characterisation of sludges. Filtration properties
- BS-EN-14701-3 - Characterization of sludges. Filtration properties
- BS-EN-14701-4 - Characterization of sludges. Filtration properties
- BS-EN-14702-1 - Characterization of sludges. Settling properties
- BS-EN-14702-2 - Characterisation of sludges. Settling properties
- BS-EN-14702-3 - Characterisation of sludges. Settling properties
- BS-EN-14742 - Characterization of sludges. Laboratory chemical conditioning procedure
- BS-EN-15170 - Characterization of sludges. Determination of calorific value
- BS-EN-15216 - Environmental solid matrices. Determination of total dissolved solids (TDS) in water and eluates
- BS-EN-15216-TC - Tracked Changes. Environmental solid matrices. Determination of total dissolved solids (TDS) in water and eluates
- BS-EN-15308 - Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- BS-EN-15308-TC - Tracked Changes. Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- BS-EN-16720-1 - Characterization of sludges. Physical consistency
- BS-EN-17183 - Characterization of sludge. Evaluation of sludge density
- BS-EN-17322 - Environmental Solid Matrices. Determination of polychlorinated biphenyls (PCB) by gas chromatography. mass selective detection (GC-MS) or electron-capture detection (GC-ECD)
- BS-EN-ISO-54321 - Soil, treated biowaste, sludge and waste. Digestion of aqua regia soluble fractions of elements
- BS-ISO-19388 - Sludge recovery, recycling, treatment and disposal. Requirements and recommendations for the operation of anaerobic digestion facilities
- BS-ISO-19698 - Sludge recovery, recycling, treatment and disposal. Beneficial use of biosolids. Land application
- BS-ISO-22447 - Industrial wastewater classification
- BS-ISO-23044 - Guidelines for softening and desalination of industrial wastewater for reuse
- BS-ISO-4789 - Guidelines for wastewater treatment and reuse in thermal power plants
- BS-ISO-6853 - Photography. Processing waste. Determination of ammoniacal nitrogen (microdiffusion method)
- PD-13846 - Recommendations to preserve and extend sludge utilization and disposal routes
- PD-CEN-13097 - Characterization of sludges. Good practice for sludge utilisation in agriculture
- PD-CEN-13767 - Characterisation of sludges. Good practice for sludges incineration with and without grease and screenings
- PD-CEN-13768 - Characterization of sludges. Good practice for combined incineration of sludges and household wastes
- PD-CEN-13983 - Characterization of sludges. Good practice for sludge utilisation in land reclamation
- PD-CEN-15126 - Characterization of sludges. Good practice for land filling of sludgesan d sludge treatment residues
- PD-CEN-15175 - Characterization of sludges. Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges
- PD-CEN-15310-1 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-2 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-4 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-5 - Characterization of waste. Sampling of waste materials
- PD-CEN-15463 - Characterization of sludges. Physical consistency. Thixotropic behaviour and piling behaviour
- PD-CEN-15473 - Characterization of sludges. Good practice for sludges drying
- PD-CEN-15809 - Characterization of sludges. Hygienic aspects. Treatments
- PD-CEN-16456 - Characterization of sludges. Good practice of sludge dewatering
- PD-CEN-16788 - Characterization of sludges. Guideline of good practice for thermal processes
- PD-CEN-ISO-20736 - Sludge recovery, recycling, treatment and disposal. Guidance on thermal treatment of sludge
- PD-CR-13097 - Characterisation of sludges. Good practice for utilisation in agriculture
- PD-CR-13714 - Characterization of sludges. Sludge management in relation to use or disposal
- PD-CR-13767 - Characterization of Sludges, Good Practice for Sludges Incineration With & Without Gre
- PD-CR-13768 - Characterization of Sludges, Good Practice for Combined Incineration of Sludges & Hous
- PD-ISO-20736 - Sludge recovery, recycling, treatment and disposal. Guidance on thermal treatment of sludge
- PD-ISO-22707 - Sludge recovery, recycling, treatment and disposal. Information on the processes and technologies for inorganic substance and nutrient recovery
ISO:
- ISO-19388 - Sludge recovery, recycling, treatment and disposal - Requirements and recommendations for the operation of anaerobic digestion facilities
- ISO-19698 - Sludge recovery, recycling, treatment and disposal - Beneficial use of biosolids - Land application
- ISO-20736 - Sludge recovery, recycling, treatment and disposal - Guidance on thermal treatment of sludge
- ISO-22447 - Industrial wastewater classification
- ISO-22707 - Sludge recovery, recycling, treatment and disposal - Information on the processes and technologies for inorganic substance and nutrient recovery
- ISO-23043 - Evaluation methods for industrial wastewater treatment reuse processes
- ISO-23044 - Guidelines for softening and desalination of industrial wastewater for reuse
- ISO-31800 FRENCH - Faecal sludge treatment units - Energy independent, prefabricated, community-scale, resource recovery units - Safety and performance requirements [Standard in French]
- ISO-4789 - Guidelines for wastewater treatment and reuse in thermal power plants
- ISO-54321 - Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements
Other SDOs:
- DIN-EN-14671 - Characterization of Sludges - Pre-Treatment for the Determination of Extractable Ammon
- DIN-EN-14672 - Characterization of Sludges, Determination of Total Phosphorus
- DIN-EN-14701-1 - Part 1: Capillary Suction Time (Cst), Characterization of Sludges - Filtration Propert
- DIN-EN-14701-2 - Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration; German version EN 14701-2:2013
- DIN-EN-14701-3 - Part 3: Determination of the Compressibility, Characterization of Sludges - Filtration
- DIN-EN-14702-1 - Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volu
- DIN-EN-14702-2 - Part 2: Determination of Thickenability, Characterization of Sludges - Settling Proper
- EN-14671 - Characterization of Sludges, Pre-Treatment for the Determination of Extractable Ammoni
- EN-14672 - Characterization of Sludges, Determination of Total Phosphorus
- EN-14701-1 - Part 1: Capillary Suction Time (Cst), Characterization of Sludges - Filtration Propert
- EN-14701-2 - Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration
- EN-14701-3 - Characterization of Sludges, Filtration Properties, Determination of the Compressibili
- EN-14701-4 - Characterization of Sludges, Filtration Properties, Determination of the Drainability
- EN-14702-1 - Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volu
- EN-14702-2 - Part 2: Determination of Thickenability, Characteristics of Sludges - Settling Proper
- EN-14702-3 - Characterisation of sludges - Settling properties - Part 3: Determination of zone settling velocity (ZSV)
- EN-14742 - Characterization of sludges - Laboratory chemical conditioning procedure
- EN-15170 - Characterization of Sludges - Determination of Calorific Value
- EN-15216 - Characterization of Waste, Determination of Total Dissolved Solids (Tds) in Water & E
- EN-15308 - Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- EN-16720-1 - Characterization of sludges - Physical consistency - Part 1: Determination of flowability - Method by extrusion tube apparatus
- EN-17183 - Characterization of sludge - Evaluation of sludge density
- IWA-28 - Faecal sludge treatment units - Energy independent, prefabricated, community-scale resource-recovery units - Safety and performance
- SIS-CEN/CR-13714 - Characterization of sludges - Sludge management in relation to use or disposal
- SIS-CEN/CR-13768 - Characterization of sludges - Good for combined incineration of sludges and household wastes
- SIS-CEN/TR-13097 - Characterization of sludges - Good practice for sludge utilisation in agriculture
- SIS-CEN/TR-13714 - Characterization of sludges - Sludge management in relation to use or disposal
- SIS-CEN/TR-13767 - Characterisation of sludges - Good practice for sludges incineration with and without grease and screenings
- SIS-CEN/TR-13768 - Characterisation of sludges - Good practice for combined incineration of sludges and household wastes
- SIS-CEN/TR-13983 - Characterization of sludges - Good practice for sludge utilisation in land reclamation
- SIS-CEN/TR-15126 - Characterization of sludges - Good practice for landfilling of sludges and sludge treatment residues
- SIS-CEN/TR-15175 - Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges
- SIS-CEN/TR-15214-1 - Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantification
- SIS-CEN/TR-15214-2 - Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 2: Miniaturised method (Most Probable Number) by inoculation in liquid medium
- SIS-CEN/TR-15214-3 - Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and bio-wastes - Part 3: Macromethod (Most Probable Number) in liquid medium
- SIS-CEN/TR-15215-1 - Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration method for quantitative resuscitation of sub-lethally stressed bacteria (to confirm efficacy of log drop treatment procedures)
- SIS-CEN/TR-15215-2 - Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 2: Liquid enrichment method in selenite-cystine medium followed by Rapport-Vassiliadis for semi-quantitative Most Probable Number (MPN) determination
- SIS-CEN/TR-15215-3 - Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 3: Presence/absence method by liquid enrichment in peptone-novobiocin medium followed by Rapport-Vassiliadis
- SIS-CEN/TR-15252 - Characterization of sludges - Protocol for validating methods for physical properties of sludges
- SIS-CEN/TR-15310-1 - Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions
- SIS-CEN/TR-15310-2 - Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques
- SIS-CEN/TR-15310-4 - Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery
- SIS-CEN/TR-15310-5 - Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan
- SIS-CEN/TR-15463 - Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour
- SIS-CEN/TR-15473 - Characterization of sludges - Good practice for sludges drying
- SIS-CEN/TR-15809 - Characterization of sludges - Hygienic aspects - Treatments
- SIS-CEN/TS-16170 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
- SIS-CEN/TS-16171 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
- SIS-CEN/TS-16181 - Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- SS-EN-12176 - Characterization of sludges - Determination of pH
- SS-EN-12457-1 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
- SS-EN-12457-2 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
- SS-EN-12457-3 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
- SS-EN-12457-4 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
- SS-EN-12832 - Characterization of sludges - Utilisation and disposal of sludges - Vocabulary
- SS-EN-12879 - Characterization of sludges - Determination of the loss on ignition of dry mass
- SS-EN-12880 - Characterization of sludges - Determination of dry residue and water content
- SS-EN-13137 - Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
- SS-EN-13342 - Characterization of sludges - Determination of Kjeldahl nitrogen
- SS-EN-13346 - Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods
- SS-EN-14671 - Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
- SS-EN-14672 - Characterization of sludges - Determination of total phosphorus
- SS-EN-14701-1 - Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST)
- SS-EN-14701-2 - Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration
- SS-EN-14701-3 - Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility
- SS-EN-14701-4 - Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge
- SS-EN-14702-1 - Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
- SS-EN-14702-2 - Characterisation of sludges - Settling properties - Part 2: Determination of thickenability
- SS-EN-14702-3 - Characterisation of sludges - Settling properties - Part 3: Determination of zone settling velocity (ZSV)
- SS-EN-14742 - Characterization of sludges - Laboratory chemical conditioning procedure
- SS-EN-15216 - Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates
- SS-EN-15308 - Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- SS-EN-16170 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
- SS-EN-16171 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
- SS-EN-16720-1 - Characterization of sludges - Physical consistency - Part 1: Determination of flowability - Method by extrusion tube apparatus
- SS-EN-17183 - Characterization of sludge - Evaluation of sludge density
- SS-EN-17322 - Environmental Solid Matrices - Determination of polychlorinated biphenyls (PCB) by gas chromatography - mass selective detection (GC-MS) or electron-capture detection (GC-ECD)
- STG-TR-113 - Rekommendationer kring användning och omhändertagande av slam med befintliga och framtida metoder (CR 13846:2000)