Document Center List of Standards on Dental Instruments
ICS Code 11.060.25
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-2965 - Specification for dental chisels, excavators, probes and scalers
- BS-4178-1 - Specification for dental rotary instruments
- BS-4178-2 - Specification for dental rotary instruments
- BS-4222 - Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces
- BS-6828-1 - Dental rotary instruments
- BS-6828-2 - Dental rotary instruments
- BS-6828-5-5.2 - Dental rotary instruments. Number coding system
- BS-6828-8.1 - Dental rotary instruments. Cutters
- BS-7077-2.2 - Dental handpieces and accessories. Accessories
- BS-EN-1639 - Dentistry. Medical devices for dentistry. Instruments
- BS-EN-23630-2 - Dental root canal instruments
- BS-EN-26360-2 - Dentistry. Dental rotary instruments. Number coding system
- BS-EN-27785-1 - Specification for dental handpieces. Dental handpieces and accessories. Handpieces. Specification for high-speed air-turbine handpieces
- BS-EN-27787-3 - Specification for dental rotary instruments. Cutters. Carbide laboratory cutters for milling machines
- BS-EN-ISO-11498 - Dental handpieces. Dental low-voltage electric motors
- BS-EN-ISO-13294 - Dental handpieces. Dental air-motors
- BS-EN-ISO-13402 - Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure
- BS-EN-ISO-13504 - Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment
- BS-EN-ISO-14457 - Dentistry. Handpieces and motors
- BS-EN-ISO-15087-1 - Dental elevators
- BS-EN-ISO-15087-2 - Dental elevators
- BS-EN-ISO-15087-3 - Dental elevators
- BS-EN-ISO-15087-4 - Dental elevators
- BS-EN-ISO-15087-5 - Dental elevators
- BS-EN-ISO-15087-6 - Dental elevators
- BS-EN-ISO-15098 - Dentistry. Dental tweezers
- BS-EN-ISO-15098-1 - Dental tweezers
- BS-EN-ISO-15098-2 - Dental tweezers
- BS-EN-ISO-15098-3 - Dental tweezers
- BS-EN-ISO-15098-TC - Tracked Changes. Dentistry. Dental tweezers
- BS-EN-ISO-15606 - Dental handpieces. Air-powered scalers and scaler tips
- BS-EN-ISO-1797 - Dentistry. Shanks for rotary and oscillating instruments
- BS-EN-ISO-1797-2 - Dental rotary instruments. Shanks
- BS-EN-ISO-18397 - Dentistry. Powered scaler
- BS-EN-ISO-19490 - Dentistry. Sinus membrane elevator
- BS-EN-ISO-21672-1 - Dentistry. Periodontal probes
- BS-EN-ISO-21672-2 - Dentistry. Periodontal probes
- BS-EN-ISO-22374 - Dentistry. Dental handpieces. Electrical-powered scalers and scaler tips
- BS-EN-ISO-22569 - Dentistry. Multifunction handpieces
- BS-EN-ISO-23940-TC - Tracked Changes. Dentistry. Excavators
- BS-EN-ISO-3630-1 - Dentistry. Endodontic instruments
- BS-EN-ISO-3630-3 - Dentistry. Endodontic instruments
- BS-EN-ISO-3630-3-TC - Tracked Changes. Dentistry. Endodontic instruments
- BS-EN-ISO-3630-4 - Dentistry. Endodontic instruments
- BS-EN-ISO-3630-5 - Dentistry. Endodontic instruments
- BS-EN-ISO-3823-2 - Dentistry. Rotary bur instruments
- BS-EN-ISO-3964 - Dentistry. Coupling dimensions for handpiece connectors
- BS-EN-ISO-6360-1 - Dentistry. Number coding system for rotary instruments
- BS-EN-ISO-6360-2 - Dentistry. Number coding system for rotary instruments
- BS-EN-ISO-6360-3 - Dentistry. Number coding system for rotary instruments
- BS-EN-ISO-6360-5 - Dentistry. Number coding system for rotary instruments
- BS-EN-ISO-6360-6 - Dentistry. Number coding system for rotary instruments
- BS-EN-ISO-6360-7 - Dentistry. Number coding system for rotary instruments
- BS-EN-ISO-7711-1 - Dentistry. Diamond rotary instruments
- BS-EN-ISO-7711-1-TC - Tracked Changes. Dentistry. Diamond rotary instruments
- BS-EN-ISO-7711-2 - Dentistry. Rotary diamond instruments
- BS-EN-ISO-7785-1 - Dental handpieces
- BS-EN-ISO-7785-2 - Dental handpieces
- BS-EN-ISO-7786 - Dental rotary instruments. Laboratory abrasive instruments
- BS-EN-ISO-7787-1 - Dentistry. Laboratory cutters
- BS-EN-ISO-7787-4 - Dental rotary instruments. Cutters
- BS-EN-ISO-8325-TC - Tracked Changes. Dentistry. Test methods for rotary instruments
- BS-EN-ISO-9873 - Dentistry. Intra-oral mirrors
ISO:
- ISO-13504 - Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment
- ISO-14457 - Dentistry - Handpieces and motors
- ISO-18397 - Dentistry - Powered scaler
- ISO-19490 - Dentistry - Sinus membrane elevator
- ISO-21672-1 - Dentistry - Periodontal probes - Part 1: General requirements
- ISO-21672-2 - Dentistry - Periodontal probes - Part 2: Designation
- ISO-22374 - Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips
- ISO-22569 - Dentistry - Multifunction handpieces
- ISO-23445 - Dentistry - Tissue punches
- ISO-23940 - Dentistry - Excavators
- ISO-6360-1 - Dentistry - Number coding system for rotary instruments - Part 1: General characteristics
- ISO-6360-2 - Dentistry - Number coding system for rotary instruments - Part 2: Shapes
- ISO-6360-2-1 - Dental rotary instruments - Number coding system - Part 2: Shape and specific characteristics - Amendment 1
- ISO-6360-3 - Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters
- ISO-6360-4 - Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments
- ISO-6360-5 - Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments
- ISO-6360-6 - Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments
- ISO-6360-7 - Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments
Other SDOs:
- DIN-EN-1639 - Dentistry - Medical devices for dentistry - Instruments; German version EN 1639:2009
- DIN-EN-ISO-13397-2 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type - Colour coding (ISO 13397-2:2005 + Amd 1:2012)
- DIN-EN-ISO-21671 - Dentistry - Rotary polishers
- DIN-EN-ISO-22374 - Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips
- DIN-EN-ISO-6360-1 - Part 1: General Characteristics, Dentistry - Number Coding System for Rotary Instrumen
- DIN-EN-ISO-6360-2 - Dentistry - Number coding system for rotary instruments - Part 2: Shapes
- DIN-EN-ISO-6360-3 - Part 3: Specific Characteristics of Burs & Cutters, Dentistry - Number Coding System
- DIN-EN-ISO-6360-4 - Part 4: Specific Characteristics of Diamond Instruments, Dentistry - Number Coding Sys
- DIN-EN-ISO-6360-6 - Part 6: Specific Characteristics of Abrasive Instruments, Dentistry - Number Coding Sy
- DIN-EN-ISO-6360-7 - Part 7: Specific Characteristics of Mandrels & Special Instruments, Dentistry - Number
- DIN-EN-ISO-7494-1 - Dentistry - Dental units - Part 1: General requirements and test methods
- DIN-EN-ISO-7494-2 - Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems
- DIN-EN-ISO-7711-3 - Part 3: Grit Sizes, Designation & Colour Code, Dentistry, Diamond Rotary Instruments
- DIN-EN-ISO-8325 - Dentistry - Test Methods for Rotary Instruments
- DIN-EN-ISO-9173-1 - Dentistry - Extraction forceps - Part 1: General requirements
- EN-1639 - Dentistry - Medical Devices for Dentistry - Instruments
- EN-ISO-11498 - Dental Handpieces, Dental Low-Voltage Electric Motors
- EN-ISO-13294 - Dental Handpieces, Dental Air-Motors
- EN-ISO-13504 - Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012)
- EN-ISO-14457 - Dentistry - Handpieces and motors (ISO 14457:2012)
- EN-ISO-15098-3 - Part 3: College Types, Dental Tweezers
- EN-ISO-18397 - Dentistry - Powered scaler
- EN-ISO-19490 - Dentistry - Sinus membrane elevator
- EN-ISO-21672-1 - Dentistry - Periodontal probes - Part 1: General requirements
- EN-ISO-21672-2 - Dentistry - Periodontal probes - Part 2: Designation (ISO 21672-2:2012)
- EN-ISO-22374 - Dentistry, Dental Handpieces, Electrical-Powered Scalers & Scaler Tips
- EN-ISO-3630-1 - Dentistry, Root-Canal Instruments, General Requirements & Test Methods
- EN-ISO-3630-4 - Part 4: Auxiliary Instruments, Dentistry - Root Canal Instruments
- EN-ISO-3964 - Dentistry - Coupling dimensions for handpiece connectors
- EN-ISO-6360-1 - Dentistry - Number coding system for rotary instruments - Part 1: General characteristics
- EN-ISO-6360-2 - Dentistry - Number coding system for rotary instruments - Part 2: Shapes
- EN-ISO-6360-3 - Part 3: Specific Characteristics of Burs & Cutters, Dentistry - Number Coding System F
- EN-ISO-6360-4 - Part 4: Specific Characteristics of Diamond Instruments, Dentistry - Number Coding Sys
- EN-ISO-6360-5 - Dentistry, Number Coding System for Rotary Instruments, Specific Characteristics of Ro
- EN-ISO-6360-6 - Part 6: Specific Characteristics of Abrasive Instruments, Dentistry - Number Coding Sy
- EN-ISO-6360-7 - Part 7: Specific Characteristics of Mandrels & Special Instruments, Dentistry - Number
- EN-ISO-7711-1 - Part 1: Dimensions, Requirements, Marking & Packaging, Dental Rotary Instruments - Dia
- SS-EN-1639 - Dentistry - Medical devices for dentistry - Instruments
- SS-EN-ISO-13366-2 - Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006)
- SS-EN-ISO-13504 - Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012)
- SS-EN-ISO-14457 - Dentistry - Handpieces and motors (ISO 14457:2017)
- SS-EN-ISO-18397 - Dentistry - Powered scaler (ISO 18397:2016)
- SS-EN-ISO-19490 - Dentistry - Sinus membrane elevator (ISO 19490:2017)
- SS-EN-ISO-21672-1 - Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012)
- SS-EN-ISO-21672-2 - Dentistry - Periodontal probes - Part 2: Designation (ISO 21672-2:2012)
- SS-EN-ISO-22374 - Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips (ISO 22374:2005)
- SS-EN-ISO-22569 - Dentistry - Multifunction handpieces (ISO 22569:2020)
- SS-EN-ISO-23445 - Dentistry - Tissue punches (ISO 23445:2021)
- SS-EN-ISO-23940 - Dentistry - Excavators (ISO 23940:2021)
- SS-EN-ISO-3964 - Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016)
- SS-EN-ISO-3964-AM1 - Dentistry - Coupling dimensions for handpiece connectors - Amendment 1: Interface dimensions (ISO 3964:2016/Amd 1:2018)
- SS-EN-ISO-6360-1 - Dentistry - Number coding system for rotary instruments - Part 1: General characteristics (ISO 6360-1:2004)
- SS-EN-ISO-6360-2 - Dentistry - Number coding system for rotary instruments - Part 2: Shapes (ISO 6360-2:2004)
- SS-EN-ISO-6360-2-AM1 - Dentistry - Number coding system for rotary instruments - Part 2: Shapes - Amendment 1 (ISO 6360-2:2004/Amd 1:2011)
- SS-EN-ISO-6360-3 - Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters (ISO 6360-3:2005)
- SS-EN-ISO-6360-4 - Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004)
- SS-EN-ISO-6360-5 - Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007)
- SS-EN-ISO-6360-6 - Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments (ISO 6360-6:2004)
- SS-EN-ISO-6360-7 - Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006)