Document Center List of Standards on Surgical Instruments And Materials Including Surgical Dressings, Sutures, Etc.
ICS Code 11.040.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D3579 - Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
- ASTM-F1026 - Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
- ASTM-F1078 - Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
- ASTM-F1079 - Standard Specification for Inserted and Noninserted Surgical Scissors
- ASTM-F1089 - Standard Test Method for Corrosion of Surgical Instruments
- ASTM-F116 - Standard Specification for Medical Screwdriver Bits
- ASTM-F1266 - Standard Performance Specification for Cerebral Stereotactic Instruments (Withdrawn 2017)
- ASTM-F1325 - Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
- ASTM-F1611 - Standard Specification for Intramedullary Reamers
- ASTM-F1613 - Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
- ASTM-F1744 - Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
- ASTM-F1813 - Standard Specification for Wrought Titanium-12Molybdenum-6Zirconium-2Iron Alloy for Surgical Implant (UNS R58120)
- ASTM-F1840 - Standard Terminology for Surgical Suture Needles
- ASTM-F1855 - Standard Specification for Polyoxymethylene (Acetal) for Medical Applications
- ASTM-F1874 - Standard Test Method for Bend Testing of Needles Used in Surgical Sutures (Withdrawn 2020)
- ASTM-F1992 - Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes (Withdrawn 2016)
- ASTM-F2026 - Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
- ASTM-F2062 - Standard Specification for Square Drive Interconnections on Surgical Instruments
- ASTM-F2063 - Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
- ASTM-F2066 - Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
- ASTM-F2820 - Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
- ASTM-F2848 - Standard Specification for Medical-Grade Ultra-High-Molecular-Weight Polyethylene Yarns
- ASTM-F3014 - Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures (Withdrawn 2023)
- ASTM-F3046 - Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
- ASTM-F3212 - Standard Test Method for Coring Testing of Huber Needles
- ASTM-F3260 - Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
- ASTM-F469 - Practice for Assessment of Compatibility of Nonporous Polymeric Materials for Surgical Implants with Regard to Effect of Materials on Tissue (Withdrawn 1987)
- ASTM-F564 - Standard Specification and Test Methods for Metallic Bone Staples
- ASTM-F565 - Standard Practice for Care and Handling of Orthopedic Implants and Instruments
- ASTM-F700 - Standard Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
- ASTM-F701 - Standard Practice for Care and Handling of Neurosurgical Implants and Instruments (Withdrawn 2017)
- ASTM-F899 - Standard Specification for Wrought Stainless Steels for Surgical Instruments
- ASTM-F921 - Standard Terminology Relating to Hemostatic Forceps
- ASTM-F960 - Standard Specification for Medical and Surgical Suction and Drainage Systems (Withdrawn 2003)
BSI:
- BS-2930 - Specification for surgical spring trusses
- BS-3271 - Specification for surgical elastic band trusses
- BS-3348 - Specification for antral trocars and cannulae
- BS-3419 - Specification for Tilley's aural and nasal forceps
- BS-3531-5.7 - Implants for osteosynthesis. Bone screws and auxiliary equipment
- BS-4824 - Specification for fibrelight cables and fittings for surgical equipment
- BS-5194-1 - Surgical instruments
- BS-5194-4 - Surgical instruments
- BS-EN-12011 - Instrumentation to be used in association with non-active surgical implants. General requirements
- BS-EN-12218 - Rail systems for supporting medical equipment
- BS-EN-14079 - Non-active medical devices. Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
- BS-EN-27740 - Specification for dimensions of surgical scalpels with detatchable blades
- BS-EN-60601-2-2 - Medical electrical equipment. Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- BS-EN-60601-2-41 - Medical electrical equipment
- BS-EN-724 - Guidance on the Application of En-29001 & En-46001 & of En-29002 & En-46002 for Non-Active
- BS-EN-IEC-60601-2-2 - Medical electrical equipment
- BS-EN-IEC-60601-2-2-TC - Tracked Changes. Medical electrical equipment
- BS-EN-IEC-60601-2-41 - Medical electrical equipment
- BS-EN-IEC-60601-2-41-TC - Tracked Changes. Medical electrical equipment
- BS-EN-ISO-11810 - Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
- BS-EN-ISO-11810-1 - Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers
- BS-EN-ISO-11810-2 - Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers
- BS-EN-ISO-13402 - Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure
- BS-EN-ISO-7153-1 - Surgical instruments. Materials
- BS-EN-ISO-7153-1-TC - Tracked Changes. Surgical instruments. Materials
- BS-ISO-10936-1 - Optics and photonics. Operation microscopes
- BS-ISO-10936-1-TC - Tracked Changes. Optics and photonics. Operation microscopes
- BS-ISO-10936-2 - Optics and photonics. Operation microscopes
- BS-ISO-7151 - Surgical instruments. Non-cutting, articulated instruments. General requirements and test methods
- BS-ISO-9714-1 - Orthopaedic drilling instruments
IEC:
- IEC-60601-2-2 - Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- IEC-60601-2-2-RL - Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- IEC-80601-2-77 - Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
- IEC-80601-2-77-AM1 - Amendment 1 - Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
ISO:
- ISO-10936-1 - Optics and photonics - Operation microscopes - Part 1: Requirements and test methods
- ISO-10936-2 - Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
- ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
- ISO-11810-1 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
- ISO-11810-2 - Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition
- ISO-13402 - Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure
- ISO-7151 - Surgical instruments - Non-cutting, articulated instruments - General requirements and test methods
- ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals
- ISO-7153-1-1 - Amendment 1 to ISO 7153-1:1991
- ISO-7740 - Instruments for surgery -- Scalpels with detachable blades -- Fitting dimensions
- ISO-7741 - Instruments for surgery -- Scissors and shears -- General requirements and test methods
Other SDOs:
- DS-EN-60601-2-2 - Part 2-2: Particular Requirements for the Basic Safety & Essential Performance of High
- EN-12218 - Rail Systems for Supporting Medical Equipment
- EN-60601-2-2 - Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- EN-60601-2-41 - Medical electrical equipment - Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis
- EN-724 - Guidance on the Application of En 29001 & En 46001 & of En 29002 & En 46002 for Non-Ac
- EN-IEC-60601-2-2 - Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
- EN-ISO-11810-2 - Part 2: Secondary Ignition, Lasers & Laser-Related Equipment - Test Method & Classific
- EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals
- IEC-60601-2-2-AM1 - Amendment 1 - Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- JIS-T-3234 - Endoscopic balloon
- JIS-T-3237 - Sterile devices of endoscopic variceal ligation for single use
- JIS-T-3238 - Sterile devices of suction tip
- SS-EN-12011 - Instrumentation to be used in association with non-active surgical implants - General requirements
- SS-EN-27740 - Instruments for surgery - Scalpels with detachable blades - Fitting dimensions (ISO 7740:1985)
- SS-EN-27740-AM1 - Instruments for surgery, scalpels with detachableblades, fitting dimensions (ISO 7740:1985)
- SS-EN-46002 - Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002
- SS-EN-60601-2-2 - Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- SS-EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)
- SS-EN-ISO-11810-1 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient-protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005)
- SS-EN-ISO-11810-2 - Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007)
- SS-EN-ISO-13402 - Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995)
- SS-EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
- UNE-EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals