Document Center List of Standards on Technical Drawings In General
ICS Code 01.100.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BIP-2155 - The essential guide to technical product specification
- BIP-3016 - BS 8888:2004 Technical Product Specification CD-ROM
- BIP-3082 - Technical product documentation and specification
- BS-2856 - Precise conversion of inch and metric sizes on engineering drawings
- BS-5070-2 - Engineering diagram drawing practice
- BS-8887-1 - Design for manufacture, assembly, disassembly and end-of-life processing (MADE)
- BS-8887-2 - Design for manufacture, assembly, disassembly and end-of-life processing (MADE)
- BS-8887-220 - Design for manufacture, assembly, disassembly and end-of-life processing (MADE)
- BS-8887-3 - Design for manufacture, assembly, disassembly and end-of-life processing (MADE)
- BS-8888 - Technical product documentation and specification
- BS-8888-CD - Technical product documentation and specification
- BS-8888-TC - Tracked Changes. Technical product documentation and specification
- BS-EN-15016-1 - Railway applications. Technical documents
- BS-EN-15016-1-TC - Tracked Changes. Railway applications. Technical documents
- BS-EN-15016-2 - Railway applications. Technical documents
- BS-EN-15016-2-TC - Tracked Changes. Railway applications. Technical documents
- BS-EN-15016-3 - Railway applications. Technical documents
- BS-EN-15016-3-TC - Tracked Changes. Railway applications. Technical documents
- BS-EN-15016-4 - Railway applications. Technical documents
- BS-EN-15016-4-TC - Tracked Changes. Railway applications. Technical documents
- BS-EN-ISO-10209 - Technical product documentation. Vocabulary. Terms relating to technical drawings, product definition and related documentation
- BS-EN-ISO-10209-2 - Technical product documentation. Vocabulary
- BS-EN-ISO-10209-TC - Tracked Changes. Technical product documentation. Vocabulary. Terms relating to technical drawings, product definition and related documentation
- BS-EN-ISO-10628 - Flow diagrams for process plants. General rules
- BS-EN-ISO-128-1 - Technical product documentation (TPD). General principles of representation
- BS-EN-ISO-128-100 - Technical product documentation. General principles of representation
- BS-EN-ISO-128-2 - Technical product documentation. General principles of representation
- BS-EN-ISO-128-20 - Technical drawings. General principles of presentation
- BS-EN-ISO-128-21 - Technical drawings. General principles of presentation
- BS-EN-ISO-128-2-TC - Tracked Changes. Technical product documentation (TPD). General principles of representation
- BS-EN-ISO-128-3 - Technical product documentation (TPD). General principles of representation
- BS-EN-ISO-128 SERIES KIT - Technical product documentation (TPD). General principles of representation
- BS-EN-ISO-129-1 - Technical product documentation (TPD). Presentation of dimensions and tolerances
- BS-EN-ISO-14660-1 - Geometrical product specifications (GPS). Geometrical features
- BS-EN-ISO-14660-2 - Geometrical product specifications (GPS). Geometrical features
- BS-EN-ISO-1660 - Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
- BS-EN-ISO-17450-3 - Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-3-TC - Tracked Changes. Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-4 - Geometrical product specifications (GPS). Basic concepts
- BS-EN-ISO-21920-1 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-1-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-3098-0 - Technical product documentation. Lettering.
- BS-EN-ISO-3098-1 - Technical product documentation. Lettering
- BS-EN-ISO-3098-1-TC - Tracked Changes. Technical product documentation. Lettering
- BS-EN-ISO-3098-2 - Technical product documentation. Lettering.
- BS-EN-ISO-3098-3 - Technical product documentation. Lettering.
- BS-EN-ISO-3098-4 - Technical product documentation. Lettering.
- BS-EN-ISO-3098-5 - Technical product documentation. Lettering.
- BS-EN-ISO-3098-6 - Technical product documentation. Lettering.
- BS-EN-ISO-5455 - Technical drawings. Scales
- BS-EN-ISO-5456-1 - Technical drawings. Projection methods. Synopsis
- BS-EN-ISO-5456-2 - Technical drawings. Projection methods. Orthographic representations
- BS-EN-ISO-5456-3 - Technical drawings. Projection methods. Axonometric representations
- BS-EN-ISO-5457 - Technical product documentation. Sizes and layout of drawing sheets
- BS-EN-ISO-5458-TC - Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
- BS-EN-ISO-6428 - Technical drawings. Requirements for microcopying
- BS-ISO-10209-1 - Technical product documentation. Vocabulary
- BS-ISO-105778 - Technical drawings. Tolerancing of orientation and location. Projected tolerance zone
- BS-ISO-10578 - Technical drawings. Tolerancing of orientation and location. Projected tolerance zone
- BS-ISO-1101 - Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
- BS-ISO-128 - Technical drawings. General principles of presentation
- BS-ISO-128-22 - Technical drawings. General principles of presentation
- BS-ISO-128-25 - Technical drawings. General principles of presentation
- BS-ISO-128-30 - Technical drawings. General principles of presentation
- BS-ISO-128-34 - Technical drawings. General principles of presentation
- BS-ISO-128-40 - Technical drawings. General principles of presentation
- BS-ISO-128-50 - Technical drawings. General principles of presentation
- BS-ISO-129 - Technical drawings. Dimensioning. General principles, definitions, methods of execution and special indications
- BS-ISO-129-1 - Technical product documentation (TPD). Presentation of dimensions and tolerances
- BS-ISO-129-4 - Technical product documentation (TPD). Indication of dimensions and tolerances
- BS-ISO-129-5 - Technical product documentation. Indication of dimensions and tolerances
- BS-ISO-14985 - Hard-copy output of engineering drawings. Specification for the structure of control files
- BS-ISO-2692 - Technical Drawings - Geometrical Tolerancing Maximum Material Principle
- BS-ISO-3040 - Technical drawings. Dimensioning and tolerancing. Cones
- BS-ISO-3272-1 - Microfilming of technical drawings and other drawing office documents
- BS-ISO-406 - Technical Drawings - Tolerancing of Linear & Angular Dimensions
- BS-ISO-5456-4 - Technical drawings. Projection methods
- BS-ISO-5459 - Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances
- BS-ISO-7200 - Technical drawing. Title blocks
- BS-ISO-8015 - Technical drawings. Fundamental tolerancing principle
- BS-ISO-8887-1 - Technical product documentation. Design for manufacturing, assembling, disassembling and end-of-life processing
- PD-8888 - Technical product documentation (TPD). An interim report
- PD-ISO-23605 - Technical product specification (TPS). Application guidance. International model for national implementation
- PD-ISO-23605-TC - Tracked Changes. Technical product specification (TPS). Application guidance. International model for national implementation
- PP-8888-1 - A guide for schools and colleges to BS 8888:2006, Technical Product Specification
- PP-8888-1 (PACK OF 5 - A guide for schools and colleges to BS8888:2006, Technical Product Specification
- PP-8888-1 SINGLE PDF - A guide for schools and colleges to BS 8888:2006, Technical Product Specification
- PP-8888-2 - Engineering drawing practice: a guide for further and higher education to BS 8888:2006, Technical product specification (TPS)
- PP-8888-2 (PACK OF 5 - Engineering drawing practice. a guide for further and higher education to BS 8888:2006, Technical product specification (TPS)
ISO:
- ISO-10209-1 - Technical product documentation -- Vocabulary -- Part 1: Terms relating to technical drawings: general and types of drawings
- ISO-10209-2 - Technical product documentation -- Vocabulary -- Part 2: Terms relating to projection methods
- ISO-128 - Technical drawings -- General principles of presentation
- ISO-128-1 - Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements
- ISO-128-100 - Technical product documentation - General principles of representation - Part 100: Index
- ISO-128-2 - Technical product documentation (TPD) - General principles of representation - Part 2: Basic conventions for lines
- ISO-128-20 - Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines
- ISO-128-21 - Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems
- ISO-128-22 - Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines
- ISO-128-3 - Technical product documentation (TPD) - General principles of representation - Part 3: Views, sections and cuts
- ISO-128-30 - Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views
- ISO-128-40 - Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections
- ISO-128-50 - Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections
- ISO-129-1 - Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles
- ISO-129-1-AM1 - - Amendment 1
- ISO-129-4 - Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
- ISO-129-5 - Technical product documentation - Indication of dimensions and tolerances - Part 5: Dimensioning of structural metal work
- ISO-14985 - Hard-copy output of engineering drawings -- Specification for the structure of control files
- ISO-23605 - Technical product specification (TPS) - Application guidance - International model for national implementation
- ISO-24096-1 - Technical product documentation (TPD) - Classification of requirements - Part 1: Framework
- ISO-24096-2 - Technical product documentation (TPD) - Classification of requirements - Part 2: Classification based on severity and susceptibility
- ISO-3098-0 - Technical product documentation -- Lettering -- Part 0: General requirements
- ISO-3098-1 - Technical product documentation - Lettering - Part 1: General requirements
- ISO-3098-2 - Technical product documentation -- Lettering -- Part 2: Latin alphabet, numerals and marks
- ISO-3098-3 - Technical product documentation -- Lettering -- Part 3: Greek alphabet
- ISO-3098-4 - Technical product documentation -- Lettering -- Part 4: Diacritical and particular marks for the Latin alphabet
- ISO-3098-5 - Technical product documentation -- Lettering -- Part 5: CAD lettering of the Latin alphabet, numerals and marks
- ISO-3098-6 - Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet
- ISO-3272-1 - Microfilming of technical drawings and other drawing office documents - Part 1: Operating procedures
- ISO-3272-2 - Microfilming of technical drawings and other drawing office documents -- Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
- ISO-3272-3 - Microfilming of technical drawings and other drawing office documents - Part 3: Aperture card for 35 mm microfilm
- ISO-3272-4 - Microfilming of technical drawings and other drawing office documents -- Part 4: Microfilming of drawings of special and exceptional elongated sizes
- ISO-3272-5 - Microfilming of technical drawings and other drawing office documents -- Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards
- ISO-3272-6 - Microfilming of technical drawings and other drawing office documents - Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
- ISO-406 - Technical drawings -- Tolerancing of linear and angular dimensions
- ISO-5455 - Technical drawings -- Scales
- ISO-5456-1 - Technical drawings -- Projection methods -- Part 1: Synopsis
- ISO-5456-2 - Technical drawings -- Projection methods -- Part 2: Orthographic representations
- ISO-5456-3 - Technical drawings -- Projection methods -- Part 3: Axonometric representations
- ISO-5456-4 - Technical drawings -- Projection methods -- Part 4: Central projection
- ISO-5457 - Technical product documentation -- Sizes and layout of drawing sheets
- ISO-5457-AM1 - Technical drawings - Sizes and layout of drawing sheets - Amendment 1
- ISO-6428 - Technical drawings -- Requirements for microcopying
Other SDOs:
- DIN-EN-15016-1 - Part 1: General Principles, Technical Drawings, Railway Applications
- DIN-EN-15016-2 - Part 2: Parts Lists, Technical Drawings, Railway Applications
- DIN-EN-15016-3 - Part 3: Handling of Modifications of Technical Documents, Technical Drawings, Railway
- DIN-EN-15016-4 - Part 4: Data Exchange, Technical Drawings - Railway Applications
- DIN-EN-ISO-128-20 - Part 20: Basic Conventions for Lines, Technical Drawings - General Principles of Prese
- DIN-EN-ISO-1302 - Geometrical Product Specifications (Gps), Indication of Surface Texture in Technical P
- DIN-EN-ISO-5456-4 - Part 4: Central Projection, Technical Drawings - Projectionmethods
- EN-15016-1 - Part 1: General Principles, Technical Drawings, Railway Applications
- EN-15016-2 - Part 2: Parts Lists, Technical Drawings, Railway Applications
- EN-15016-3 - Part 3: Handling of Modifications of Technical Documents, Technical Drawings, Railway
- EN-15016-4 - Part 4: Data Exchange, Technical Drawings - Railway Applications
- EN-ISO-128-20 - Part 20: Basic Conventions for Lines, Technical Drawings - General Principles of Prese
- EN-ISO-128-21 - Part 21: Preparation of Lines by Cad Systems, Technical Drawings - General Principles
- EN-ISO-1660 - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
- EN-ISO-3098-0 - Technical Product Documentation, Lettering, General Requirements
- EN-ISO-3098-1 - Technical product documentation - Lettering - Part 1: General requirements
- EN-ISO-3098-5 - Technical Product Documentation - Lettering, Part 5: Cad Lettering of the Latin Alphab
- EN-ISO-5455 - Technical Drawings, Scales
- EN-ISO-5457 - Technical Product Documentation - Sizes & Layout of Drawing Sheets
- JIS-B-0011-1 - Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
- JIS-B-0011-2 - Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric representation
- JIS-B-0011-3 - Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
- JIS-Z-8310 - Technical drawings -- General code of drafting practices
- JIS-Z-8311 - Technical drawings -- Sizes and layout of drawing sheets
- JIS-Z-8313-0 - Technical drawings -- Lettering -- Part 0: General requirements
- JIS-Z-8313-2 - Technical drawings -- Lettering -- Part 2: Greek characters
- JIS-Z-8314 - Technical drawings -- Scales
- JIS-Z-8318 - Technical product documentation (TPD) -- Indication method of tolerances for linear and angular dimensions
- SIS-CEN/TR-17439 - Guidance on how to implement EN ISO 19650-1 and -2 in Europe
- SIS-ISO/TR-23605 - Technical product specification (TPS) - Application guidance - International model for national implementation
- SMS-Rapport-40 - Enhetliga CAD-filer
- SS-1902 - Technical drawings - General requirements for execution
- SS-2222 - Technical documentation - Classification of requirements on manufacturing documentation
- SS-3148 - Technical drawings - Symbols for direction and first clamping
- SS-3149 - Technical drawings - Layout of title blocks, itemlists, revision blocks and ownership clauses
- SS-3624 - Technical drawings - Chain thin double-dashed line - General applications
- SS-688 - Technical drawings - Folding of drawing prints toA4
- SS-EN-15016-1 - Railway applications - Technical documents - Part 1: General principles
- SS-EN-15016-2 - Railway applications - Technical documents - Part 2: Parts lists
- SS-EN-15016-3 - Railway applications - Technical documents - Part 3: Handling of modifications of technical documents
- SS-EN-15016-4 - Railway applications - Technical documents - Part 4: Data exchange
- SS-EN-2851 - Flyg- och rymdteknik - Märkning av komponenter andra än motorer - Angivning på ritningar
- SS-EN-ISO-10209 - Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2022)
- SS-EN-ISO-10209-2 - Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods (ISO 10209-2:1993)
- SS-EN-ISO-128-1 - Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements (ISO 128-1:2020)
- SS-EN-ISO-128-100 - Technical product documentation - General principles of representation - Part 100: Index (ISO 128-100:2020)
- SS-EN-ISO-128-2 - Technical product documentation (TPD) - General principles of representation - Part 2: Basic conventions for lines (ISO 128-2:2022)
- SS-EN-ISO-128-20 - Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996)
- SS-EN-ISO-128-21 - Technical drawings - General principles of presentation - Part 21: Lines - Preparation of lines by CAD-systems (ISO 128-21:1997)
- SS-EN-ISO-128-3 - Technical product documentation (TPD) - General principles of representation - Part 3: Views, sections and cuts (ISO 128-3:2022)
- SS-EN-ISO-129-1 - Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles (ISO 129-1:2018)
- SS-EN-ISO-129-1-AM1 - Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles - Amendment 1 (ISO 129-1:2018/Amd 1:2020)
- SS-EN-ISO-16526-2 - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
- SS-EN-ISO-1660 - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
- SS-EN-ISO-16739-1 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2018)
- SS-EN-ISO-3098-0 - Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997)
- SS-EN-ISO-3098-1 - Technical product documentation - Lettering - Part 1: General requirements (ISO 3098-1:2015)
- SS-EN-ISO-3098-2 - Technical product documentation - Lettering - Part 2: Latin alphabet, numeral and marks (ISO 3098-2:2000)
- SS-EN-ISO-3098-3 - Technical product dokumentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000)
- SS-EN-ISO-3098-4 - Technical product dokumentation . Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000)
- SS-EN-ISO-3098-5 - Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numeralsand marks (ISO 3098-5:1997)
- SS-EN-ISO-3098-6 - Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000)
- SS-EN-ISO-5455 - Technical drawings - Scales (ISO 5455:1979)
- SS-EN-ISO-5456-1 - Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996)
- SS-EN-ISO-5456-2 - Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996)
- SS-EN-ISO-5456-3 - Technical drawings - Projection methods - Part 3: Axonometric representations (ISO 5456-3:1996)
- SS-EN-ISO-5456-4 - Technical drawings - Projection methods - Part 4: Central projection (ISO 5456-4:1996)
- SS-EN-ISO-5457 - Technical product documentation - Sizes and layout of drawings sheets (ISO 5457:1999)
- SS-EN-ISO-5457-AM1 - Technical product documentation - Sizes and layout of drawing sheets - Amendment 1 (ISO 5457:1999/Amd 1:2010)
- SS-EN-ISO-6428 - Technical drawings - Requirements for microcopying (ISO 6428:1982)
- SS-EN-ISO-6433 - Technical product documentation - Part references (ISO 6433:2012)
- SS-EN-ISO-7200 - Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004)
- SS-EN-ISO-7518 - Technical drawings - Construction drawings - Simplified representation of demolition and rebuilding (ISO 7518:1983)
- SS-EN-ISO-9431 - Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets (ISO 9431:1990)
- SS-ISO-128 - Technical drawings - General principles of presentation
- SS-ISO-128-1 - Technical drawings - General principles of presentation - Part 1: Introduction and index (ISO 128-1:2003, IDT)
- SS-ISO-128-20 - Technical drawings - General principles of presentation - Part 20: Lines - Basic conventions
- SS-ISO-128-21 - Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems
- SS-ISO-128-22 - Technical drawings - General principles of presentation - Part 22: Leader lines
- SS-ISO-128-30 - Technical drawings - General principles of presentation - Part 30: Basic conventions for views
- SS-ISO-128-33 - Technical product documentation (TPD) - General principles of presentation - Part 33: Representation of views, sections and cuts in construction drawings (ISO 128-33, IDT)
- SS-ISO-128-40 - Technical drawings - General principles of presentation - Part 40: Basic conventions for cuts and sections
- SS-ISO-128-50 - Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections
- SS-ISO-129-1 - Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 1: General principles (ISO 129-1, IDT)
- SS-ISO-129-4 - Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings (ISO 129-4:2013, IDT)
- SS-ISO-129-5 - Technical product documentation - Indication of dimensions and tolerances - Part 5: Dimensioning of structural metal work (ISO 129-5:2018, IDT)
- SS-ISO-14985 - Hard copy output of engineering drawings - Specification for the structure of control files
- SS-ISO-1660 - Technical drawings - Dimensioning and tolerancingof profiles
- SS-ISO-2162-1 - Technical product documentation - Springs - Part 1: Simplified representation
- SS-ISO-2162-2 - Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs
- SS-ISO-3098-1 - Technical product documentation -- Lettering -- Part 1: General requirements
- SS-ISO-3098-2 - Technical drawings - Lettering - Greek characters
- SS-ISO-3098-4 - Technical drawings - Lettering - Cyrillic characters
- SS-ISO-3272-3 - Microfilming of technical drawings and other drawing office documents - Part 3: Aperture card for 35 mm microfilm
- SS-ISO-3272-5 - Microfilming of technical drawings and other drawing office documents - Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards
- SS-ISO-5455 - Technical drawings - Scales
- SS-ISO-5456-1 - Technical drawings - Projection methods - Part 1:Synopsis
- SS-ISO-5456-2 - Technical drawings - Projection methods - Part 2:Orthographic representations
- SS-ISO-5456-3 - Technical drawings - Projection methods - Part 3:Axonometric representations
- SS-ISO-5456-4 - Technical drawings - Projection methods - Part 4:Central projection
- SS-ISO-5457 - Technical drawings - Sizes and layout of drawing sheets
- SS-ISO-6433 - Technical drawings - Item references
- SS-ISO-7200 - Technical drawings - Title blocks
- SS-ISO-7573 - Technical product documentation - Parts lists (ISO 7573:2008, IDT)
- SS-ISO-9959-1 - Numerically controlled draughting machines - Drawing test for the evaluation of performance - Part 1: Vector plotters