Document Center List of Standards on Metrology And Measurement. Physical Phenomena (Vocabularies)
ICS Code 01.040.17
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6161 - Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
- ASTM-E1142 - Standard Terminology Relating to Thermophysical Properties
- ASTM-E1655 - Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM-E170 - Standard Terminology Relating to Radiation Measurements and Dosimetry
- ASTM-E2161 - Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
- ASTM-E3083 - Standard Terminology Relating to Radiation Processing: Dosimetry and Applications
- ASTM-E344 - Terminology Relating to Thermometry and Hydrometry
- ASTM-E473 - Standard Terminology Relating to Thermal Analysis and Rheology
- ASTM-E673 - Standard Terminology Relating to Surface Analysis (Withdrawn 2012)
BSI:
- BS-3015 - Glossary of terms relating to mechanical vibration and shock
- BS-3680-1 - Measurement of liquid flow in open channels. Glossary of terms
- BS-4727-1-GROUP-04 - Measurement Terminology
- BS-4727-2-GROUP-16 - Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering
- BS-5698-1 - Guide to pulse techniques and apparatus. Pulse terms and definitions
- BS-EN-14255-4 - Measurement and assessment of personal exposures to incoherent optical radiation
- BS-EN-60469 - Transitions, pulses and related waveforms. Terms, definitions and algorithms
- BS-EN-IEC-62933-1 - Electrical Energy Storage (EES) systems
- BS-EN-IEC-62933-1-TC - Tracked Changes. Electrical energy storage (EES) systems
- BS-EN-ISO-10360-1 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
- BS-EN-ISO-12181-1 - Geometrical product specifications (GPS). Roundness
- BS-EN-ISO-12780-1 - Geometrical product specifications (GPS). Straightness
- BS-EN-ISO-14660-1 - Geometrical product specifications (GPS). Geometrical features
- BS-EN-ISO-14660-2 - Geometrical product specifications (GPS). Geometrical features
- BS-EN-ISO-17450-3 - Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-3-TC - Tracked Changes. Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-4 - Geometrical product specifications (GPS). Basic concepts
- BS-EN-ISO-2064 - Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness
- BS-EN-ISO-21920-2 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-25178-73 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-4287 - Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
- BS-EN-ISO-772 - Hydrometry. Vocabulary and symbols
- BS-EN-ISO-772-TC - Tracked Changes. Hydrometry. Vocabulary and symbols
- BS-EN-ISO-8062-1 - Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts
- BS-EN-ISO-8062-3 - Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts
- BS-EN-ISO-8655-1 - Piston-operated volumetric apparatus
- BS-EN-ISO-8785 - Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
- BS-ISO-13372 - Condition monitoring and diagnostics of machines. Vocabulary
- BS-ISO-13473-2 - Characterization of pavement texture by use of surface profiles
- BS-ISO-14839-1 - Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14839-1-TC - Tracked Changes. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-15261 - Vibration and shock generating systems. Vocabulary
- BS-ISO-18405 - Underwater acoustics. Terminology
- BS-ISO-2041 - Mechanical vibration, shock and condition monitoring. Vocabulary
- BS-ISO-2041-TC - Tracked Changes. Mechanical vibration, shock and condition monitoring. Vocabulary
- BS-ISO-5725-1-TC - Tracked Changes. Accuracy (trueness and precision) of measurement methods and results
- BS-ISO-7626-1 - Mechanical vibration and shock. Experimental determination of mechanical mobility
- BS-ISO-9849 - Optics and optical instruments. Geodetic and surveying instruments. Vocabulary
- BS-ISO-9849-TC - Tracked Changes. Optics and optical instruments. Geodetic and surveying instruments. Vocabulary
- DD-CEN-ISO-12180-1 - Geometrical Product Specifications (Gps), Cylindricity, Vocabulary & Parameters of Cyl
- DD-CEN-ISO-12181-1 - Geometrical product specifications (GPS). Roundness
- DD-CEN-ISO-12780-1 - Geometrical product specifications (GPS). Straightness
- DD-CEN-ISO-12781-1 - Geometrical product specifications (GPS). Flatness
- DD-CEN-ISO-12781-2 - Geometrical Product Specifications (Gps), Flatness, Specification Operators
- PAS-133 - Terminology for common nanoscale measurement and instrumentation
- PD-6461-1 - General metrology
- PD-6461-2 - General metrology
- PD-6461-3 - General metrology
- PD-ISO-25417 - Acoustics. Definitions of basic quantities and terms
IEC:
- IEC-50(801) - International Electrotechnical Vocabulary - Chapter 801: Acoustics and electroacoustics
- IEC-50(881) - International Electrotechnical Vocabulary. Radiology and radiological physics
- IEC-60050-121 - International Electrotechnical Vocabulary - Part 121: Electromagnetism
- IEC-60050-121-1 - Amendment 1
- IEC-60050-121-2 - Amendment 2 - International Electrotechnical Vocabulary - Part 121: Electromagnetism
- IEC-60050-121-AM3 - Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism
- IEC-60050-121-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism
- IEC-60050-121-AM5 - Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism
- IEC-60050-131 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-131-1 - Amendment 1 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-131-2 - Amendment 2 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-131-AM3 - Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory
- IEC-60050-131-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory
- IEC-60050-131-AM5 - Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory
- IEC-60050-141 - International Electrotechnical Vocabulary - Part 141: Polyphase systems and circuits
- IEC-60050-161-AM4 - Amendment 4 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility
- IEC-60050-192 - International electrotechnical vocabulary - Part 192: Dependability
- IEC-60050-192-AM1 - Amendment 1 - International Electrotechnical Vocabulary - Part 192: Dependability
- IEC-60050-300 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
- IEC-60050-300-AM1 - Amendment 1 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 312: General terms relating to electrical measurements
- IEC-60050-300-AM2 - Amendment 1 - International electrotechnical vocabulary - Electrical and electronic measurements and measuring instruments - Part 314: Specific terms according to the type of instrument
- IEC-60050-300-AM3 - Amendment 3 - International electrotechnical vocabulary - Electrical and electronic measurements and measuring instruments - Part 314: Specific terms according to the type of instrument
- IEC-60050-300-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 313: Types of electrical measuring instruments
- IEC-60050-393 - Part 393: Nuclear Instrumentation - Physical Phenomena & Basic Concepts, International Ele
- IEC-60050-394 - Part 394: Nuclear Instrumentation - Instruments, Systems, Equipment & Detectors, Inter
- IEC-60050-801-AM1 - Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60050-801-AM2 - Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60050-801-AM3 - Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60050-801-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60050-881-AM1 - Amendment 1 - International Electrotechnical Vocabulary - Part 881: Radiology and radiological physics
- IEC-60050-881-AM2 - Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 881: Radiology and radiological physics
- IEC-60050-881-AM3 - Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 881: Radiology and radiological physics
- IEC-60469 - Transitions, pulses and related waveforms - Terms, definitions and algorithms
- IEC-62933-1 - Electrical energy storage (EES) systems - Part 1: Vocabulary
ISO:
- ISO-10360-1 - Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary
- ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness
- ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
- ISO-13372 - Condition monitoring and diagnostics of machines - Vocabulary
- ISO-14660-1 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
- ISO-14839-1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary
- ISO-14839-1-AM1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary - Amendment 1
- ISO-15261 - Vibration and shock generating systems - Vocabulary
- ISO-15261-AM1 - - Amendment 1
- ISO-18405 - Underwater acoustics - Terminology
- ISO-2041 - Mechanical vibration, shock and condition monitoring - Vocabulary
- ISO-21920-2 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters
- ISO-25178-73 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
- ISO-4006 - Measurement of fluid flow in closed conduits - Vocabulary and symbols
- ISO-4287 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
- ISO-4287/A1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number
- ISO-772 - Hydrometry - Vocabulary and symbols
- ISO-772-1 - Liquid flow measurement in open channels - Vocabulary and symbolsAmendment 1: Additional terms and definitions
- ISO-772-2 - Liquid flow measurement in open channels - Vocabulary and symbolsAmendment 2
- ISO-8062-1 - Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
- ISO-8655-1 - Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations
- ISO-8785 - Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
- ISO-9849 - Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
- ISO/IEC-GUIDE 99 - International vocabulary of metrology - Basic and general concepts and associated terms (VIM)
Other SDOs:
- DIN-EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
- DIN-EN-14255-4 - Part 4: Terminology & Quantities Used in UV-, Visible & IR-Exposure Measurements, Meas
- DIN-EN-ISO-14978 - Geometrical Product Specifications (Gps) - General Concepts & Requirements for Gps Me
- DIN-EN-ISO-772/A2 - Amendment 2 for Din-En-ISO-772, Hydrometric Determinations, Vocabulary & Symbols
- DIN-EN-ISO-8655-1 - Part 1: Terminology, General Requirements & User Recommendations, Piston-Operated Volu
- EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products
- EN-14255-4 - Part 4: Terminology & Quantities Used in UV-, Visible & IR-Exposure Measurements, Meas
- EN-60469 - Transitions, pulses and related waveforms - Terms, definitions and algorithms
- EN-IEC-62933-1 - Electrical Energy Storage (EES) systems - Part 1: Vocabulary
- EN-ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- EN-ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- EN-ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness
- EN-ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
- EN-ISO-25178-73 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
- EN-ISO-4287 - Geometrical Product Specifications (Gps) - Surface Texture: Profile Method - Terms, D
- EN-ISO-772 - Hydrometry - Vocabulary and symbols
- EN-ISO-8062-1 - Geometrical Product Specifications (Gps), Dimensional & Geometrical Tolerances for Mou
- EN-ISO-8062-3 - Geometrical Product Specifications (Gps), Dimensional & Geometrical Tolerances for Mou
- EN-ISO-8655-1 - Part 1: Terminology, General Requirements & User Recommendations, Piston-Operated Volu
- JIS-B-0601 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
- JIS-B-0610 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Definitions and designation of rolling circle waviness
- JIS-B-0672-1 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
- JIS-B-0672-2 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
- SIS-ISO/TS-12180-1 - Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- SIS-ISO/TS-12181-1 - Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- SIS-ISO/TS-12781-1 - Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
- SIS-ISO/TS-12781-2 - Geometrical Product Specifications (GPS) - Flatness - Part 2: Specification operators
- SS-20106 - Metrology - Vocabulary
- SS-EN-10049 - Measurement of roughness average Ra and peak count RPc on metallic flat products
- SS-EN-12830 - Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
- SS-EN-13190 - Dial thermometers
- SS-EN-14255-4 - Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements
- SS-EN-ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
- SS-EN-ISO-12180-2 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
- SS-EN-ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
- SS-EN-ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
- SS-EN-ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
- SS-EN-ISO-12781-2 - Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
- SS-EN-ISO-14660-1 - Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999)
- SS-EN-ISO-14660-2 - Geometrical Procduct Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feautre (ISO 14660-2:1999)
- SS-EN-ISO-21920-2 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021)
- SS-EN-ISO-25178-73 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
- SS-EN-ISO-4287 - Geometral Product Specifications (GSP) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997)
- SS-EN-ISO-772 - Hydrometry - Vocabulary and symbols (ISO 772:2022)
- SS-EN-ISO-772-AM1 - Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 1:2002)
- SS-EN-ISO-772-AM2 - Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 2:2004)
- SS-EN-ISO-8062-1 - Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
- SS-EN-ISO-8655-1 - Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2022)
- SS-EN-ISO-8785 - Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998)
- SS-ISO-1101 - Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- SS-ISO-13372 - Condition monitoring and diagnostics of machines - Vocabulary (ISO 13372:2012, IDT)
- SS-ISO-14839-1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary (ISO 14839-1:2002, IDT)
- SS-ISO-14839-1-AM1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary - Amendment 1 (ISO 14839-1:2002/Amd 1:2010, IDT)
- SS-ISO-15261 - Vibration and shock generating systems - Vocabulary (ISO 15261:2004, IDT)
- SS-ISO-2041 - Mechanical vibration, shock and condition monitoring - Vocabulary (ISO 2041:2018, IDT)
- SS-ISO-2064 - Metallic and other non-organic coatings - Definitions and conventions concerning the measurement ofthickness
- SS-ISO-4287-1 - Surface roughness - Terminology - Part 1: Surfaceand its parameters
- SS-ISO-4287-2 - Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
- SS-ISO-6318 - Measurements of roundness - Terms, definitions and parameters of roundness
- SS-ISO-8785 - Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
- UNI-EN-10049 - Measurement Of Roughness Average Ra And Peak Count Rpc On Metallic Flat Products