15.06: Adhesives
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C557 - Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
- ASTM-D1002 - Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM-D1062 - Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM-D1084 - Standard Test Methods for Viscosity of Adhesives
- ASTM-D1101 - Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
- ASTM-D1144 - Standard Practice for Determining Strength Development of Adhesive Bonds
- ASTM-D1146 - Standard Test Method for Blocking Point of Potentially Adhesive Layers
- ASTM-D1151 - Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
- ASTM-D1174 - Method of Test for Effect of Bacterial Contamination on Permanence of Adhesive Preparations and Adhesives Bonds (Withdrawn 1982)
- ASTM-D1183 - Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM-D1184 - Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM-D1286 - Method of Test for Effect of Mold Contamination on Permanence of Adhesives Preparations and Adhesives Bonds (Withdrawn 1982)
- ASTM-D1304 - Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
- ASTM-D1337 - Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
- ASTM-D1338 - Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
- ASTM-D1344 - Methods of Testing Cross-Lap Specimens for Tensile Properties of Adhesives
- ASTM-D1382 - Method of Test for Susceptibility of Dry Adhesive Films to Attack by Roaches (Withdrawn 1991)
- ASTM-D1383 - Method of Test for Susceptibility of Dry Adhesive Films to Attack by Laboratory Rats (Withdrawn 1991)
- ASTM-D1488 - Standard Test Method for Amylaceous Matter in Adhesives
- ASTM-D1489 - Standard Test Method for Nonvolatile Content of Aqueous Adhesives
- ASTM-D1490 - Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
- ASTM-D1579 - Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
- ASTM-D1580 - Specification for Liquid Adhesives for Automatic Machine Labeling of Glass Bottles
- ASTM-D1581 - Method of Test for Bonding Permanency of Water-or Solvent-Soluble Adhesives for Labeling Glass Bottles (Withdrawn 1991)
- ASTM-D1582 - Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
- ASTM-D1583 - Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
- ASTM-D1584 - Method of Test for Water Absorptiveness of Paper Labels (Withdrawn 1990)
- ASTM-D1713 - Test Method for Bonding Permanency of Water-or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing Top Flaps of Fiberboard Specimens (Withdrawn 1990)
- ASTM-D1714 - Test Method for Water Absorptiveness of Fiberboard Specimens for Adhesives (Withdrawn 1990)
- ASTM-D1779 - Standard Specification for Adhesive for Acoustical Materials
- ASTM-D1780 - Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM-D1781 - Standard Test Method for Climbing Drum Peel for Adhesives
- ASTM-D1828 - Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
- ASTM-D1874 - Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases (Withdrawn 2021)
- ASTM-D1875 - Standard Test Method for Density of Adhesives in Fluid Form
- ASTM-D1876 - Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
- ASTM-D1877 - Method of Test for Permanence of Adhesive-Bonded Joints in Plywood Under Mold Conditions (Withdrawn 1984)
- ASTM-D1879 - Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
- ASTM-D1916 - Standard Test Method for Penetration of Adhesives (Withdrawn 2005)
- ASTM-D1994 - Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021)
- ASTM-D1995 - Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
- ASTM-D2093 - Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM-D2094 - Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
- ASTM-D2095 - Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM-D2293 - Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
- ASTM-D2294 - Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
- ASTM-D2295 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM-D2339 - Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
- ASTM-D2556 - Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
- ASTM-D2557 - Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
- ASTM-D2559 - Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
- ASTM-D2651 - Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
- ASTM-D2674 - Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
- ASTM-D2739 - Standard Test Method for Volume Resistivity of Conductive Adhesives
- ASTM-D2851 - Standard Specification for Liquid Optical Adhesive
- ASTM-D2918 - Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
- ASTM-D2919 - Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM-D2979 - Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine (Withdrawn 2019)
- ASTM-D3110 - Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996)
- ASTM-D3111 - Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
- ASTM-D3121 - Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
- ASTM-D3163 - Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM-D3164 - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
- ASTM-D3164M - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012)
- ASTM-D3165 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
- ASTM-D3166 - Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM-D3167 - Standard Test Method for Floating Roller Peel Resistance of Adhesives
- ASTM-D3310 - Standard Test Method for Determining Corrosivity of Adhesive Materials
- ASTM-D3433 - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
- ASTM-D3434 - Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
- ASTM-D3482 - Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
- ASTM-D3498 - Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing
- ASTM-D3528 - Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM-D3535 - Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
- ASTM-D3632 - Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
- ASTM-D3658 - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM-D3762 - Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019)
- ASTM-D3807 - Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
- ASTM-D3808 - Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
- ASTM-D3929 - Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
- ASTM-D3930 - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
- ASTM-D3931 - Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM-D3932 - Practice for Control of the Application of Structural Fasteners When Attached by Hot Melt Adhesive (Withdrawn 1991)
- ASTM-D3933 - Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
- ASTM-D3983 - Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
- ASTM-D4027 - Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
- ASTM-D4299 - Test Method for Effect of Bacterial Contamination on Performance of Adhesive Preparations and Adhesives Films (Withdrawn 1990)
- ASTM-D4300 - Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
- ASTM-D4317 - Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
- ASTM-D4338 - Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
- ASTM-D4339 - Standard Test Method for Determination of the Odor of Adhesives
- ASTM-D4426 - Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
- ASTM-D4497 - Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) (Withdrawn 2021)
- ASTM-D4498 - Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021)
- ASTM-D4499 - Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021)
- ASTM-D4500 - Standard Test Method for Determining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives (Withdrawn 2001)
- ASTM-D4501 - Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
- ASTM-D4502 - Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
- ASTM-D4562 - Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
- ASTM-D4680 - Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM-D4688 - Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
- ASTM-D4689 - Standard Specification for Adhesive, Casein-Type
- ASTM-D4690 - Standard Specification for Urea-Formaldehyde Resin Adhesives
- ASTM-D4783 - Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
- ASTM-D4800 - Standard Guide for Classifying and Specifying Adhesives
- ASTM-D4896 - Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
- ASTM-D5040 - Standard Test Methods for Ash Content of Adhesives
- ASTM-D5041 - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
- ASTM-D5113 - Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
- ASTM-D5215 - Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
- ASTM-D5266 - Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
- ASTM-D5267 - Standard Test Method for Determination of Extrudability of Cartridge Adhesives
- ASTM-D5363 - Standard Specification for Anaerobic Single-Component Adhesives (AN)
- ASTM-D5572 - Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
- ASTM-D5573 - Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
- ASTM-D5574 - Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
- ASTM-D5647 - Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
- ASTM-D5648 - Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
- ASTM-D5649 - Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
- ASTM-D5656 - Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM-D5657 - Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
- ASTM-D5751 - Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
- ASTM-D5824 - Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
- ASTM-D5868 - Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
- ASTM-D5999 - Standard Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003)
- ASTM-D6004 - Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
- ASTM-D6005 - Standard Test Method for Determining Slump Resistance of Carpet Adhesives (Withdrawn 2017)
- ASTM-D6105 - Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM-D6195 - Standard Test Methods for Loop Tack
- ASTM-D6325 - Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
- ASTM-D6396 - Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
- ASTM-D6411 - Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
- ASTM-D6412 - Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
- ASTM-D6463 - Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
- ASTM-D6464 - Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
- ASTM-D6465 - Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
- ASTM-D6862 - Standard Test Method for 90 Degree Peel Resistance of Adhesives
- ASTM-D7149 - Standard Practice for Determining the Freeze Thaw Stability of Adhesives
- ASTM-D7247 - Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM-D7446 - Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
- ASTM-D7447 - Standard Practice for Symbolizing Adhesive Applications
- ASTM-D7532 - Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
- ASTM-D7799 - Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
- ASTM-D7888 - Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
- ASTM-D7966 - Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM-D7998 - Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
- ASTM-D8089 - Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
- ASTM-D8397 - Standard Specification for Acrylic and Reactive Adhesives for Installation of Vinyl and Rubber Floor Coverings
- ASTM-D896 - Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
- ASTM-D897 - Standard Test Method for Tensile Properties of Adhesive Bonds
- ASTM-D898 - Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2006)
- ASTM-D899 - Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
- ASTM-D903 - Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
- ASTM-D904 - Standard Practice for Exposure of Adhesive Specimens to Artificial Light
- ASTM-D905 - Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM-D906 - Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM-D907 - Standard Terminology of Adhesives
- ASTM-D950 - Standard Test Method for Impact Strength of Adhesive Bonds
- ASTM-E229 - Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)