FSC Standardization Area SESS: Systems Engineering Standards and Specifications
The following documents are a part of this series:
ISO:
US GOVERNMENT DOCUMENTS:
- AFGS-87249 - Mechanical Equipment and Subsystems, Requirements for the Integrity of
- AFGS-87256 - Integrated Diagnostics
- AS-6081 - Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition - Distributors Counterfeit Electronic Parts; Avoidance Protocol, Distributors
- AS-6171 - Test Methods Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts
- AS-6174 - Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming Materiel
- AS-6496 - Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition - Authorized/Franchised Distribution
- AS-6500 - Manufacturing Management Program
- DI-ALSS-81546 - Production Inspection Equipment Test Systems Engineering Design Data
- DI-ALSS-81610 - Scanning/Digitizing Data
- DI-CMAN-80225 - Ordnance Alteration (ORDALT) Instructions
- DI-CMAN-80463 - Engineering Release Record (ERR)
- DI-CMAN-80639 - Engineering Change Proposal (ECP)
- DI-CMAN-80642 - Notice of Revision (NOR)
- DI-CMAN-80788 - Quality Engineering Planning List
- DI-CMAN-80789 - Quality Assurance Provisions
- DI-CMAN-80792 - Validation Report
- DI-CMAN-80874 - Configuration Data Lists (CDLS)
- DI-CMAN-81018 - Tracking Report for Equipment Modification
- DI-CMAN-81213 - Request for Serial Number Assignment for Missile All-Up-Round (AUR) Mission Design Series (MDS) Designated Items
- DI-CMAN-81218 - Product Base Line Index (PBLI)
- DI-CMAN-81254 - Request for Nomenclature (DD Form 61)
- DI-CMAN-81516 - As Built Configuration List (ABCL)
- DI-CMAN-81588 - Configuration Management Data Interface Transactions Data Information Packets (DIPS)
- DI-GDRQ-80567 - Subsystem Design Analysis Report
- DI-GDRQ-81029 - Deck Strength Limitation Data Report
- DI-GDRQ-81112 - Detail or Intermediate Actual Weight and Balance Report - Mass Properties Data for Missiles
- DI-GDRQ-81222 - Requirements Allocation Sheets
- DI-GDRQ-81223 - Schematic Block Diagrams
- DI-GDRQ-81224 - Functional Flow Diagram
- DI-GDRQ-81233 - Weight and Balance Status Report - Mass Properties Data for Missiles
- DI-GDRQ-81234 - Estimated Weight and Balance Report - Mass Properties Data for Missiles
- DI-GDRQ-81235 - Calculated Weight and Balance Report - Mass Properties Data for Missiles
- DI-GDRQ-81236 - Preflight Weight Report - Mass Properties Data for Missiles
- DI-GDRQ-81257 - Mathematical Model Finite Element Analysis Report
- DI-GDRQ-81320 - Cooling Design Data
- DI-ILSS-80044 - Serial Number (SN) Control Card
- DI-ILSS-80223 - Airframe and Engine Tracked Components and Related Equipment Tracking Data
- DI-ILSS-80386 - Repairable Item Inspection Report
- DI-ILSS-80908 - Special Production Tooling List/Design Concept
- DI-MNTY-80173 - Production Test Plan
- DI-MNTY-81188 - Verification, Demonstration, and Evaluation Plan
- DI-MNTY-81600 - Maintainability Program Plan
- DI-MNTY-81601 - Maintainability Status Report
- DI-MNTY-81603 - Maintainability/Testability Demonstration Test Report
- DI-MNTY-81604 - Maintainability/Testability Demonstration Test Plan
- DI-RELI-80322 - Quality Conformance Inspection and Test Procedures
- DI-RELI-80685 - Critical Items List
- DI-RELI-80807 - Failure Data and Traceability Record
- DI-SESS-80198 - Internal Loads and Static Strength Analysis Report
- DI-SESS-80255 - Failure Summary and Analysis Report
- DI-SESS-80294 - Maintenance Test and Support Equipment List
- DI-SESS-80374 - Failure Analysis Summary List
- DI-SESS-80463 - Engineering Release Record (ERR)
- DI-SESS-80502 - List of Faults Inserted for Training Purposes
- DI-SESS-80567 - Subsystem Design Analysis Report
- DI-SESS-80639 - Engineering Change Proposal (ECP)
- DI-SESS-80640 - Request for Variance (RFV)
- DI-SESS-80642 - Notice of Revision (NOR)
- DI-SESS-80643 - Specification Change Notice (SCN)
- DI-SESS-80685 - Reliability Critical Items List
- DI-SESS-80776 - Technical Data Package
- DI-SESS-80789 - Quality Assurance Provisions (QAP)
- DI-SESS-80858 - Supplier's Configuration Management Plan
- DI-SESS-80979 - Reliability-Centered Maintenance (Rcm) Master System and Subsystem Index (Mssi)
- DI-SESS-80980 - Reliability Centered Maintenance (Rcm) Failure Modes and Effects Analysis (Fmea) Report
- DI-SESS-80981 - Reliability Centered Maintenance (Rcm) Functional Failure Analysis (Ffa) Report
- DI-SESS-80982 - Reliability-Centered Maintenance (Rcm) Functionally Significant Item (Fsi) Index
- DI-SESS-80983 - Reliability-Centered Maintenance (RCM) Additional Functionally Significant Item (AFSI) Selection Report
- DI-SESS-80984 - RELIABILITY CENTERED MAINTENANCE (RCM) LOGIC TREE ANALYSIS (LTA) WITH Supporting Rationale and Justification Report
- DI-SESS-80985 - Reliability Centered Maintenance (Rcm) Servicing and Lubrication Analysis (Sla) Report
- DI-SESS-80986 - Reliability Centered Maintenance (Rcm) Maintenance Requirement Index (Mri)
- DI-SESS-80987 - Reliability Centered Maintenance (Rcm) Procedure Validation Report
- DI-SESS-80988 - Reliability Centered Maintenance (Rcm) Task Definition Report
- DI-SESS-80989 - Reliability Centered Maintenance (Rcm) Inactive Equipment Maintenance (Iem) Requirement Analysis
- DI-SESS-80991 - Planned Maintenance System (Pms) Maintenance Requirement Card (Mrc)
- DI-SESS-80992 - Planned Maintenance System (Pms) Maintenance Index Page (Mip)
- DI-SESS-80994 - Reliability-Centered Maintenance (Rcm) Functional Block Diagram (Fbd)
- DI-SESS-81000 - Product Drawings/Models and Associated Lists
- DI-SESS-81001 - Conceptual Design Drawings/Models
- DI-SESS-81002 - Developmental Design Drawings/Models and Associated Lists
- DI-SESS-81003 - Commercial Drawings/Models and Associated Lists
- DI-SESS-81004 - Special Inspection Equipment (SIE) Drawings/Models and Associated Lists
- DI-SESS-81008 - Special Tooling (ST) Drawings/Models and Associated Lists
- DI-SESS-81010 - Source Control Drawing Approval Request
- DI-SESS-81011 - Drawing/Model Number Assignment Report
- DI-SESS-81012 - Proposed Critical Manufacturing Process Description (PCMPD)
- DI-SESS-81022 - Configuration Audit Summary Report and Certification
- DI-SESS-81121 - Baseline Description Document
- DI-SESS-81245 - Installation Completion Notification (ICN)
- DI-SESS-81248 - Interface Control Document (ICD)
- DI-SESS-81253 - Configuration Status Accounting (CSA) Information
- DI-SESS-81254 - Request for Nomenclature (DD Form 61)
- DI-SESS-81269 - Technical Directive
- DI-SESS-81309 - Internal Contractor Technical Data Report
- DI-SESS-81314 - System/Segment Interface Control Specification
- DI-SESS-81315 - Failure Analysis and Corrective Action Report (FACAR)
- DI-SESS-81343 - Information Security (INFOSEC) Boundary Configuration Management Plan
- DI-SESS-81359 - Parts List
- DI-SESS-81404 - Weight and Stability Reports for In-Service Surface Ships
- DI-SESS-81450 - Loads Environmental Spectra Survey (L/ESS) Data Report
- DI-SESS-81485 - Durability and Damage Tolerance (DADT) Test Report
- DI-SESS-81495 - Failure Modes, Effects, and Criticality Analysis Report
- DI-SESS-81496 - Reliability and Maintainability (R&M) Block Diagrams and Mathematical Models Report
- DI-SESS-81497 - Reliability and Maintainability Predictions Report
- DI-SESS-81498 - Structural Design Criteria Report (Helicopters)
- DI-SESS-81500 - Survivability Cost Effectiveness Tradeoff Studies Report
- DI-SESS-81517 - Training Situation Document
- DI-SESS-81518 - Instructional Performance Requirements Document
- DI-SESS-81519 - Instructional Media Requirements Document
- DI-SESS-81520 - Instructional Media Design Package
- DI-SESS-81521 - Training Program Structure Document
- DI-SESS-81522 - Course Conduct Information Package
- DI-SESS-81523 - Training Conduct Support Document
- DI-SESS-81524 - Training Evaluation Document
- DI-SESS-81525 - Test Package
- DI-SESS-81526 - Instructional Media Package
- DI-SESS-81527 - Training System Support Document
- DI-SESS-81585 - Reliability and Maintainability Test Plan
- DI-SESS-81588 - Configuration Management Data Interface Transactions Data Information Packets
- DI-SESS-81600 - Maintainability Program Plan
- DI-SESS-81603 - Maintainability and Built in Test Demonstration Report
- DI-SESS-81604 - Maintainability and Built in Test Demonstration Procedure
- DI-SESS-81613 - Reliability and Maintainability (R&M) Program Plan
- DI-SESS-81625 - Contractor Integrated Technical Information System Implementation Plan (Citis -IP)
- DI-SESS-81628 - Reliability Test Report
- DI-SESS-81629 - Reliability Test Procedure
- DI-SESS-81635 - Mission/Task Analysis Report (MTAR)
- DI-SESS-81636 - Navy Training Plan (Ntsp)
- DI-SESS-81637 - Training Planning Process Methodology (Trppm) Report
- DI-SESS-81638 - Equipment Facility Requirements (Efr) Plan
- DI-SESS-81639 - Warranty Performance Report
- DI-SESS-81646 - Configuration Audit Plan
- DI-SESS-81652 - Request for Confirmation of Nomenclature
- DI-SESS-81654 - Request for Assignment of Serial Number Prefix Letters
- DI-SESS-81655 - Request for Approval of Identification Plate Drawings
- DI-SESS-81656 - Source Data for Forecasting Diminishing Manufacturing Sources & Material Shortages (Dm
- DI-SESS-81693 - Gerber Printed Wiring Board (Pwb) Data
- DI-SESS-81694 - Engineering Database and Configuration Management Information (Edcmi)
- DI-SESS-81695 - Course Configuration Documentation Plan
- DI-SESS-81696 - Web-Based Course Test Plan
- DI-SESS-81697 - Instructional Design Documentation (Idd)
- DI-SESS-81699 - Web-Based Courseware
- DI-SESS-81704 - Test Plans/Test Procedures
- DI-SESS-81705 - Depot Level Repair Instructions
- DI-SESS-81712 - Provisioning Parts List Index (Ppli)
- DI-SESS-81713 - Provisioning Performance Schedule (Pps)
- DI-SESS-81714 - Provisioning Screening Data
- DI-SESS-81715 - Provisioning Parts List (Ppls)
- DI-SESS-81716 - Supplementary Provisioning Technical Documentation
- DI-SESS-81724 - Written Course of Instruction (Coi) for Key Personnel
- DI-SESS-81730 - Equipment History Data Package
- DI-SESS-81731 - Traceability Data
- DI-SESS-81732 - Request for Waiver (Rfw)
- DI-SESS-81733 - Integrated Circuit Design Analysis Report
- DI-SESS-81734 - Electronics Parts/Circuits Tolerance Analysis Report
- DI-SESS-81744 - Special Tooling/Special Test Equipment (St/Ste) Information for the Air Force Equipment Management System (Afems
- DI-SESS-81757 - Design Review Information Package (Drip)
- DI-SESS-81758 - Logistics Product Data
- DI-SESS-81759 - Logistics Product Data Summaries
- DI-SESS-81766 - Airworthiness Specification
- DI-SESS-81768 - Airworthiness Certification Criteria Report
- DI-SESS-81769 - Air Traffic Services Systems Requirements and Objectives
- DI-SESS-81770 - System/Software Integration Laboratory (Sil) Development and Management Plan
- DI-SESS-81771 - Reuse Management Report (Remr)
- DI-SESS-81785 - Systems Engineering Management Plan (SEMP)
- DI-SESS-81823 - Reliability-Centered Maintenance (Rcm) Class Maintenance Plahn (Cmp)
- DI-SESS-81829 - Reliability Centered Maintenance (Rcm) Corrective Maintenance (cm) Development Report
- DI-SESS-81830 - AS Built Configuration List - Common (ABCL-C)
- DI-SESS-81839 - Professional Engineering (PE) Analysis Report
- DI-SESS-81856 - Contractual Baseline Report
- DI-SESS-81869 - Tube Failure Report
- DI-SESS-81872 - Level of Repair Analysis (LORA) Report
- DI-SESS-81873 - Level of Repair Analysis (LORA) Input Data
- DI-SESS-81874 - Engineering Data for Provisioning (EDFP)
- DI-SESS-81875 - Configuration Management Plan (MIL-STD-3046)
- DI-SESS-81876 - Interface Control Document (ICD) (MIL-STD-3046)
- DI-SESS-81877 - Baseline Description Document (MIL-STD-3046)
- DI-SESS-81878 - Product Baseline Index (PBLI) (MIL-STD-3046)
- DI-SESS-81879 - Configuration Item (CI) Documentation Recommendation (MIL-STD-3046)
- DI-SESS-81880 - Engineering Change Proposal (ECP) (MIL-STD-3046)
- DI-SESS-81881 - Notice of Revision (NOR) (MIL-STD-3046)
- DI-SESS-81882 - Engineering Release Record (ERR) (MIL-STD-3046)
- DI-SESS-81883 - Request for Variance (RFV) (MIL-STD-3046)
- DI-SESS-81884 - Configuration Status Accounting Information (MIL-STD-3046)
- DI-SESS-81885 - As Built Configuration List (ABCL) (MIL-STD-3046)
- DI-SESS-81886 - Configuration Audit Plan (MIL-STD-3046)
- DI-SESS-81887 - Configuration Audit Summary Report and Certification (MIL-STD-3046)
- DI-SESS-81901 - Level of Repair Analysis (LORA) Report
- DI-SESS-81902 - Level of Repair Analysis (LORA) Data Tables
- DI-SESS-81903 - AS-Built Configuration (ABC) Bill of Material (BOM) List
- DI-SESS-81914 - Ships Maintenance Action Report
- DI-SESS-81917 - Individual Aircraft Tracking (IAT) Data Report
- DI-SESS-81921 - Quality Audit Site Visit Report (QASVR)
- DI-SESS-81922 - Certificate of Quality Audit Compliance
- DI-SESS-81923 - Quality Audit Finding and Response Record (QAFRR)
- DI-SESS-81924 - Process Review Report
- DI-SESS-81925 - Quality Audit Site Visit Schedule
- DI-SESS-81927 - Failure Analysis and Corrective Action Report (FACAR) (Navy)
- DI-SESS-81938 - Performance Analysis Report
- DI-SESS-81939 - Stress, Fatigue, and Fracture Analysis Report
- DI-SESS-81956 - Aircraft Structural Integrity Program (ASIP) Master Plan
- DI-SESS-81958 - Technical Training Plan
- DI-SESS-81965 - Provisioning Technical Documentation Submission Schedule (PTDSS)
- DI-SESS-81968 - Reliability and Maintainability (R&M) Allocation Report
- DI-SESS-81974 - Assessment of Manufacturing Risk and Readiness
- DI-SESS-81983 - Durability and Damage Tolerance (DADT) Analysis Report
- DI-SESS-81984 - Commercial Derivative Aircraft (CDA) Airworthiness Certification Data
- DI-SESS-82007 - Configuration Item (CI) Documentation Recommendation
- DI-SESS-82018 - Failure Modes, Effects, and Criticality Analysis Report
- DI-SESS-82019 - Product Baseline Index (PBLI)
- DI-SESS-82036 - Software Product Design (SPD)
- DI-SESS-82038 - Static Test Reports
- DI-SESS-82039 - Force Structural Maintenance Plan (FSMP)
- DI-SESS-82042 - Software Reuse Plan and Analysis
- DI-SESS-82043 - Software Architecture Document (SAD)
- DI-SESS-82044 - System/Software Integration Plan
- DI-SESS-82045 - Firmware Development Plan
- DI-SESS-82078 - Integrated Health Management System (IHMS) Description and Data Architecture (DDA)
- DI-SESS-82098 - Report of Shipment (RESHIP) Data Requirements
- DI-SESS-82100 - Technical Work Breakdown Structure (TWBS) and Technology Maturation Plan (TMP)
- DI-SESS-82113 - Ordnance Alteration (ORDALT) Instructions
- DI-SESS-82122 - Structural Design Criteria (SDC) Report (Aircraft)
- DI-SESS-82123 - Strength Summary and Operating Restrictions (SSOR) Report
- DI-SESS-82166 - Engineering Data Package
- DI-SESS-82168 - Technical Review Presentation Package (TRPP)
- DI-SESS-82176 - Software Architecture Description (Sward)
- DI-SESS-82177 - Specification Tree
- DI-SESS-82178 - Logistics Plan
- DI-SESS-82179 - Operation And Maintenance (O&M) Impact Estimate
- DI-SESS-82195 - Contractor Engineering Program Plan
- DI-SESS-82196 - Loads/Environment Spectra Survey (L/ESS) System Development Report
- DI-SESS-82197 - Commissioning Plan (CxP)
- DI-SESS-82206 - Task Directive Documentation
- DI-SESS-82230 - Store Separation Methodology Plan
- DI-SESS-82232 - Repeated Loads Design Criteria Report
- DI-SESS-82233 - Aircraft Store Loads Analysis Report
- DI-SESS-82235 - Materials and Processes List
- DI-SESS-82236 - Materials and Processes Substantiating Data and Analysis Test Plan
- DI-SESS-82237 - Materials and Processes Substantiating Data and Analysis Test Report
- DI-SESS-82238 - Technical Data Package List (TDPL)
- DI-SESS-82253 - Static Strength Methodology Report
- DI-SESS-82254 - Aircraft Store Loads Design Criteria Report
- DI-SESS-82264 - Pod Fatigue and Damage Tolerance Methodology Report
- DI-SESS-82265 - Pod Structural Design Criteria Report
- DI-SESS-82266 - Pod Master Event Spectrum (MES)
- DI-SESS-82267 - Durability and Damage Tolerance Control (DADTC) Plan (DADTCP)
- DI-SESS-82268 - Aircraft Structural Teardown Inspection and Evaluation Report
- DI-SESS-82269 - Structural Risk Analysis Report
- DI-SESS-82271 - Aircraft External Loads Analysis Report
- DI-SESS-82272 - Instructions For Continued Airworthiness (ICA)
- DI-SESS-82282 - Electric Load and Power Source Capacity Report
- DI-SESS-82286 - Power Source Quality Analysis Report
- DI-SESS-82287 - Overload and Fault Analysis Report
- DI-SESS-82288 - Electrical Power Capacity Report
- DI-SESS-82289 - Failure Data And Traceability Record
- DI-SESS-82291 - Air Vehicle Technical Description Report for Rotorcraft and Propeller-Driven Fixed-Wing Aircraft
- DI-SESS-82293 - Material Inspection and Receiving Report (DD Form 250)
- DI-SESS-82294 - Logistics Management Information (LMI)
- DI-SESS-82296 - Direct Parts (Aircraft and Engines) and Material Monthly Status Report
- DI-SESS-82299 - Phase-In Transition Plan
- DI-SESS-82300 - Monthly Maintenance Plan (MMP)
- DI-SESS-82303 - Phase-In Plan
- DI-SESS-82304 - Systems Architecture Deliverable
- DI-SESS-82308 - Inventory Adjustment Report
- DI-SESS-82314 - Photographic Requirements
- DI-SESS-82315 - Bar Code
- DI-SESS-82318 - Design Data and Calculations
- DI-SESS-82319 - Calibration Data
- DI-SESS-82321 - Air Vehicle Flight Performance Description Report for Rotorcraft and Propeller-Driven Fixed-Wing Aircraft
- DI-SESS-82322 - Built-in-Test Fault Tree
- DI-SESS-82328 - Computational Aerodynamics Analysis Results
- DI-SESS-82329 - Mechanical Equipment and Subsystems Integrity Program (MECSIP) Master Plan (MP)
- DI-SESS-82330 - Computational Aerodynamic Model (CAM)
- DI-SESS-82336 - Plan for Software Aspects of Certification (PSAC)
- DI-SESS-82337 - Software Accomplishment Summary (SAS)
- DI-SESS-82356 - As-Designed Parts, Materials, and Processes List (ADPMPL)
- DI-SESS-82361 - Acquisition and Sustainment Data Package (ASDP) Technical Report
- DI-SESS-82362 - Contractor Reliability, Availability, Maintainability and Testability (RAM-T) Program Plan
- DI-SESS-82364 - Digital System Model
- DI-SESS-82368 - Simulated Tactical Environment Algorithm Descriptions (Stead)
- DI-SESS-82371 - Training System Maintenance Task Analysis (TSMTA)
- DI-SESS-82378 - Engine Repair Record Report
- DI-SESS-82379 - Required Navigation Performance (RNP) Compliance Analysis
- DI-SESS-82380 - Model Based Systems Engineering (MBSE) Development Plan (MDP)
- DI-SESS-82397 - Airworthiness Plan
- DI-SESS-82400 - System Architecture Model (SAM)
- DI-SESS-82407 - Airworthiness Qualification Implementation Plan
- DI-SESS-82408 - Subcontractor Management Plan
- DI-SESS-82409 - Software Assurance Case
- DI-SESS-82410 - Software Metrics
- DI-SESS-82417 - Service Action Review Board (SARB) Agenda & Minutes
- DI-SESS-82418 - Service Action Support Report
- DI-SESS-82419 - Service Action Review Board (SARB) Analysis Report
- DI-SESS-82420 - Sustaining Engineering Project Status Report
- DI-SESS-82421 - On-Board Performance Tool Software
- DI-SESS-82422 - Aging Airplane Inspections and Records Reviews Report
- DI-SESS-82423 - Master Maintenance Planning Database (MMPD)
- DI-SESS-82424 - Design Analysis Report
- DI-SESS-82425 - Test Progress Report
- DI-SESS-82426 - Model-Based Engineering Failure Modes, Effects, and Criticality Analysis Profile (SYSML Version)
- DI-SESS-82431 - Ground Operation Procedures
- DI-SESS-82433 - Cybersecurity Supply Chain Risk Management (C-SCRM) Software Bill of Material (SBOM) Requirements
- DI-SESS-82434 - Cybersecurity Supply Chain Risk Management Hardware Bill of Materials Requirement
- DI-SESS-82436 - Air Vehicle, Software, Engine, and Auxiliary Power Unit Configuration Management Status Report
- DI-SESS-82438 - System/Design Trade Study Report
- DI-SESS-82439 - Technical Manual Research and Analysis Source Data
- DI-SESS-82441 - Contractor Test and Evaluation Maintenance Data
- DI-SESS-82442 - Contractor Fracas or Failure Reporting and Analysis Data
- DI-SESS-82443 - Contractor Failure Incident and Repair Data
- DI-SESS-82449 - Software Metrics Report (SWMR)
- DI-SESS-82451 - Composite Repair Report
- DI-SESS-82452 - Repairable Item Report
- DI-SESS-82453 - Slm Option Aircraft Production Enhanced Status Report
- EIA-632 - Processes for Engineering a System
- EIA-649 - Configuration Management Standard
- GEIA-859 - Data Management
- GEIA-HB-649 - Configuration Management Standard Implementation Guide
- GEIA-STD-0009 - Reliability Program Standard for Systems Design, Development, and Manufacturing
- IEEE-1220 - Standard for Application & Management of the Systems Engineering Process
- IEEE-15288 - Systems and Software Engineering - System Life Cycle Processes
- IEEE-15288.1 - IEEE Standard for Application of Systems Engineering on Defense Programs
- IEEE-15288.2 - IEEE Standard for Technical Reviews and Audits on Defense Programs
- MIL-BUL-544 - List of Specifications & Standards
- MIL-BUL-544/1 - List of Federal/Military/Industry Specifications and Standards, and Navair Series Documents Approved by the Naval Air Systems Command - Part I Alphabetical Listing (No Superseding Document)
- MIL-BUL-544/2 - List of Federal/Military/Industry Specifications and Standards, and Navair Series Documents Approved by the Naval Air Systems Command - Part Ii Numerical Listing (No Superseding Document)
- MIL-BUL-544/3 - LIST OF FEDERAL/MILITARY/INDUSTRY SPECIFICATIONS AND STANDARDS, AND NAVAIR SERIES DOCUMENTS APPROVED BY THE NAVAL AIR SYSTEMS COMMAND - PART III NUMERIC LISTING (CANCELED DOCUMENTS) (NO SUPERSEDING Document)
- MIL-DTL-18307 - Nomenclature and Identification for Aeronautical Systems Including Joint Electronics Type Designated Systems and Associated Support Systems
- MIL-DTL-31000 - Technical Data Packages
- MIL-HDBK-1798 - Mechanical Equipment & Subsystems Integrity Program
- MIL-HDBK-1814 - Integrated Diagnostics
- MIL-HDBK-189 - Reliability Growth Management
- MIL-HDBK-2155 - Failure Reporting, Analysis and Corrective Action Taken
- MIL-HDBK-2222 - Avionic Systems, Handbook for Interface Control Documentation - Classified, see your contracting officer
- MIL-HDBK-29612/1 - Guidance for Acquisition of Training Data Products and Services (Part 1 of 5 Parts)
- MIL-HDBK-29612/2 - Instructional Systems Development/Systems Approach to Training and Education (Part 2 of 5 Parts)
- MIL-HDBK-29612/3 - Development of Interactive Multimedia Instruction (IMI) Part 3 of 5 Parts)
- MIL-HDBK-29612/4 - Glossary for Training (Part 4 of 5 Parts)
- MIL-HDBK-29612/5 - Advanced Distributed Learning (ADL) Products and Systems (Part 5 of 5 Parts)
- MIL-HDBK-338 - Electronic Reliability Design Handbook
- MIL-HDBK-344 - Environmental Stress Screening (ESS) of Electronic Equipment
- MIL-HDBK-454 - General Guidelines for Electronic Equipment
- MIL-HDBK-470 - Designing and Developing Maintainable Products and Systems, Volume I
- MIL-HDBK-470/1 - Designing & Developing Maintainable Products & Systems (Volume 1)
- MIL-HDBK-472 - Maintainability Prediction
- MIL-HDBK-502 - Product Support Analysis
- MIL-HDBK-514 - Operational Safety, Suitability, & Effectiveness for the Aeronautical Enterprise
- MIL-HDBK-515 - Weapon System Integrity Guide (WSIG)
- MIL-HDBK-516 - Airworthiness Certification Criteria
- MIL-HDBK-520 - Systems Requirements Document Guidance
- MIL-HDBK-525 - Electrical Wiring Interconnect System (EWIS) Integrity Program
- MIL-HDBK-539 - Digital Engineering and Modeling Practices
- MIL-HDBK-5400 - Electronic Equipment, Airborne General Guidelines for
- MIL-HDBK-704-1 - Part 1 of 8, Guidance for Test Procedures for Demonstration of Utilization Equipment
- MIL-HDBK-704-2 - Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance To Aircraft Electrical Power Characteristics Single Phase, 400 Hz, 115 Volt ( Part 2 of 8 Parts )
- MIL-HDBK-704-3 - Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance To Aircraft Electrical Power Characteristics Three Phase, 400 Hz, 115 Volt ( Part 3 of 8 Parts )
- MIL-HDBK-704-4 - Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance To Aircraft Electrical Power Characteristics Single Phase, Variable Frequency, 115 Volt ( Part 4 of 8 Parts )
- MIL-HDBK-704-5 - Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance To Aircraft Electrical Power Characteristics Three Phase, Variable Frequency, 115 Volt ( Part 5 of 8 Parts )
- MIL-HDBK-704-6 - Part 6 of 8, Test Procedures for Demonstration of Utilization Compliance To Aircraft E
- MIL-HDBK-704-7 - Part 7 of 8, Guidance for Test Procedures for Demonstration O Utilization Equipment C
- MIL-HDBK-704-8 - Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance to Aircraft Electrical Power Characteristics 28 VDC (Part 8 of 8 Parts)
- MIL-HDBK-762 - Design of Aerodynamically Stabilized Free Rockets
- MIL-HDBK-776 - Shafts, Elastic Torsional Stress Analysis of
- MIL-HDBK-781 - Reliability Test Methods, Plans, and Environments for Engineering Development, Qualification, and Production
- MIL-HDBK-798 - System Engineer's Design for Discard Handbook
- MIL-HDBK-896 - Manufacturing Management Program Guide
- MIL-HDBK-910 - Mobile Tactical Systems Overload Prevention Procedures
- MIL-PRF-29612 - Training Data Products
- MIL-STD-1289 - Airborne Stores, Ground Fit and Compatibility Requirements
- MIL-STD-130 - Identification Marking of U.S. Military Property
- MIL-STD-1464 - Army Nomenclature System
- MIL-STD-1760 - Aircraft/Store Electrical Interconnection System
- MIL-STD-1798 - Mechanical Equipment and Subsystems Integrity Program
- MIL-STD-196 - Joint Electronics Type Designation System
- MIL-STD-2003 - ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS and SUBMARINES
- MIL-STD-2003-1 - Electric Plant Installation Standard Methods for Surface Ships and Submarines (Cable)
- MIL-STD-2003-2 - Electric Plant Installation Standard Methods for Surface Ships and Submarines (Equipment)
- MIL-STD-2003-3 - ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS and SUBMARINES (Penetrations)
- MIL-STD-2003-4 - ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS and SUBMARINES (CABLEWAYS)
- MIL-STD-2003-5 - ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS and SUBMARINES (CONNECTORS)
- MIL-STD-2042 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines
- MIL-STD-2042-1 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Cables) (Part 1 of 7 Parts)
- MIL-STD-2042/1 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Cables) (Part 1 of 7 Parts)
- MIL-STD-2042-2 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Equipment) (Part 2 of 7 Parts)
- MIL-STD-2042-3 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Cable Penetrations) (Part 3 of 7 Parts)
- MIL-STD-2042/3 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Cable Penetrations) (Part 3 of 7 Parts)
- MIL-STD-2042-4 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Cableways) (Part 4 of 7 Parts)
- MIL-STD-2042/4 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Cableways) (Part 4 of 7 Parts)
- MIL-STD-2042-5 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Connectors and Interconnections) (Part 5 of 7 Parts)
- MIL-STD-2042-6 - Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines(Tests) (Part 6 of 7 Parts)
- MIL-STD-2042-7 - Fiber Optic Cable Topology Installation Standard Methods for Naval Ships (Pierside Connectivity Cable Assemblies and Interconnection Hardware) (Part 7 of 7 Parts)
- MIL-STD-2042/7 - Fiber Optic Cable Topology Installation Standard Methods Fornaval Ships (Pierside Conn
- MIL-STD-2070 - PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS and CRITICALITY ANALYSIS FOR AERONAUT ICAL EQUIPMENT (USE M IL-STD 1629
- MIL-STD-2217 - Memory Loader/Verifier Multiplex Bus Interface With Avionic Systems, Requirements for
- MIL-STD-3024 - Propulsion System Integrity Program (PSIP)
- MIL-STD-3034 - Reliability-Centered Maintenance (RCM) Process
- MIL-STD-3046 - Configuration Management
- MIL-STD-31000 - Technical Data Packages
- MIL-STD-690 - Failure Rate Sampling Plans and Procedures
- MIL-STD-785 - Reliability Program for Systems and Equipment Development and Production (No Superseding Document)
- SAE-HIR-1559 - Pneumatic Systems, Bleed-Air, for Gas Turbine Equipped Marine and Amphibious Craft
- SAE-J1775 - Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft
- SS-636148 - Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
- SS-636149 - Documentation - Greek alphabet coded character set for bibliographic information interchange
- SS-636152 - Character repertoire and coded character sets forthe international teletex service
- SS-636154 - Information processing - ISO 7-bit and 8-bit coded character sets - Additional control functions for character-imaging devices
- SS-636155 - Information processing - Coded character sets fortext communication - Part 1: General introduction
- TA-STD-0017 - Product Support Analysis
- TA-STD-0017-1 - Handbook for GEIA-STD-0007 Logistics Product Data Reports