FSC Standardization Area QCIC: Quality Control/Assurance and Inspection
The following documents are a part of this series:
ASTM:
ISO:
US GOVERNMENT DOCUMENTS:
- ANSI-B18.18.3M - Inspection & Quality Assurance for Special Purpose Fasteners
- ANSI-S1.10 - Calibration of Microphones, Method for the
- ANSI-S1.15 - Measurement Microphones, Part 1: Specifications for Laboratory Standard Microphones
- ANSI-S3.5 - American National Standard Methods for Calculation of the Speech Intelligibility Index
- ANSI-Z540.1 - Laboratories, Calibration, and Measuring and Test Equipment
- ANSI-Z540.3 - Requirements for the Calibration of Measuring and Test Equipment
- AQAP-100 - Policy on an Integrated Systems Approach To Quality Through the Life Cycle
- AQAP-110 - Nato Quality Assurance Requirements for Design, Development& Production
- AQAP-119 - Nato Guide To AQAPS-110, -120 & -130
- AQAP-120 - Nato Quality Assurance Requirements for Production
- AQAP-130 - Nato Quality Assurance Requirements for Inspection & Test
- AQAP-159 - Guidance for the Use of AQAP-150
- AS-9003 - Inspection and Test Quality Systems, Requirements for Aviation, Space, and Defense Organizations
- AS-9100 - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
- AS-9110 - Quality Management Systems - Requirements for Aviation Maintenance Organizations
- ASQC-Q90 - Quality Management and Quality Assurance Standards
- ASQC-Q9000 - Quality management systems - Fundamentals and vocabulary
- ASQC-Q9000 COMPLETE - Complete Set Includes ASQC-Q9000, Q9001, & Q9004
- ASQC-Q9001 - Quality management systems - Requirements
- ASQC-Q9004 - Quality management systems - Managing for the sustained success of an organization
- ASQC-Q91 - Quality Systems - Model for Quality Assurance in Design +Canc, 1994, Use ASQC-Q9001
- ASQC-Q92 - Quality Systems - Model for Quality Assurancein Production +Canc, 1994, Use ASQC-Q9002
- ASQC-Q93 - Quality Systems - Model for Quality Assurancein Final +Cancelled, 1994, Use ASQC-Q9003
- ASQC-Q94 - Quality Management & Quality Systems Elements -Guidelines +Cancelled, 1994, Use ASQC-Q
- ASQC-Z1.13 - Quality systems guidelines for research
- ASQ-Q9000 - Quality management systems - Fundamentals and vocabulary
- DID-QCIC-81111 - Summary of Precision Measurement Equipment Laboratory (PMEL) Total Quality Program Reviews
- DI-QCIC-80042 - Quality Plan for Test and Installation Sites
- DI-QCIC-80097 - Technical Plan
- DI-QCIC-80107 - Quality Program Plan
- DI-QCIC-80112 - Quality Assurance Program Status Report
- DI-QCIC-80125 - Government Industry Data Exchange Program (Gidep) Alert/Safe-Alert Report
- DI-QCIC-80126 - Government Industry Data Exchange Program (Gidep) Alert/Safe-Alert Response
- DI-QCIC-80127 - Gidep Annual Progress Report
- DI-QCIC-80130 - Discrepancy Analysis, Resolution and Status Report
- DI-QCIC-80131 - Failure and Analysis Tracking Report
- DI-QCIC-80135 - Post-Cutover Quality Control Report
- DI-QCIC-80139 - Factory Test Report
- DI-QCIC-80140 - Installation Test Report
- DI-QCIC-80141 - Acceptance Test Report
- DI-QCIC-80147 - Quality Control Plan
- DI-QCIC-80153 - Factory Test Plan
- DI-QCIC-80154 - Installation and Acceptance Test Plan (Iatp)
- DI-QCIC-80155 - Installation Test Plan (Cancelled, 1994, Superseded by DI-QCIC-80154)
- DI-QCIC-80202 - Breakdown Diagram
- DI-QCIC-80203 - Interface Analysis Record
- DI-QCIC-80204 - Test Elements List
- DI-QCIC-80205 - Ship Test Outline
- DI-QCIC-80206 - Shipboard Industrial Test Procedure
- DI-QCIC-80207 - Verification Analysis Record
- DI-QCIC-80232 - Quality Control Inspection Report
- DI-QCIC-80278 - Calibration and Measurement Requirements Summary (CMRS)
- DI-QCIC-80369 - Quality Program Plan
- DI-QCIC-80375 - In-Process Subassembly Inspection/Test Summary Report
- DI-QCIC-80376 - Incoming Inspection Summary Report
- DI-QCIC-80425 - Overhead Hoist Evaluation Data
- DI-QCIC-80437 - Micrographics Quality Control Procedures Report
- DI-QCIC-80450 - Food Service Quality Control Plan
- DI-QCIC-80451 - Material Identification Record for Bearing Balls
- DI-QCIC-80452 - Eddy Current Inspection Record for Bearing Balls
- DI-QCIC-80453 - Ultrasonic Inspection Record for Bearing Ball Material
- DI-QCIC-80509 - Installation-Engineering Plan
- DI-QCIC-80510 - Installation Specification
- DI-QCIC-80511 - Installation Test Procedures
- DI-QCIC-80512 - Installation Test Report
- DI-QCIC-80553 - Acceptance Test Plan
- DI-QCIC-80560 - Quality Control Data From the Manufacturing Process of Adhesively Bonded Assemblies
- DI-QCIC-80561 - End Item Manufacturing Defect Reduction Report
- DI-QCIC-80562 - Assembly and Subassembly Manufacturing Quality Report
- DI-QCIC-80572 - Software Quality Program Plan
- DI-QCIC-80577 - Calibration Certificate of Traceability (Cancelled, 1989, Superseded by DI-QCIC-80798)
- DI-QCIC-80609 - Drinking Water Analysis Report
- DI-QCIC-80735 - Government Furnished Equipment/Government Furnished Material (Gfe/Gfm) Status Report
- DI-QCIC-80736 - Quality Deficiency Report
- DI-QCIC-80756 - Quality Engineering Inspection Requirements and Equipment List
- DI-QCIC-80757 - Special Inspection Equipment Concept
- DI-QCIC-80774 - Demonstration Test Report (Dtr)
- DI-QCIC-80775 - Demonstration Test Plan (Dtp)
- DI-QCIC-80798 - Calibration Certificate
- DI-QCIC-80801 - Interactive Courseware (Icw) Test Validation Report
- DI-QCIC-80814 - Submarine Safety/Material Certification Boundary Book
- DI-QCIC-80815 - Submarine Safety/Material Certification Composite Lists
- DI-QCIC-80864 - Scanning Electron Microscope Analysis Report
- DI-QCIC-80885 - Integrated Circuit Photomicrograph
- DI-QCIC-80886 - Custom Microcircuit Characterization Plan
- DI-QCIC-80887 - Custom Microcircuit Characterization Report
- DI-QCIC-80889 - Microcircuit Product Assurance Program Plan
- DI-QCIC-80890 - Mechanical Worst Case Analysis Report of Dimensions and Tolerances
- DI-QCIC-80906 - Calibration System Description
- DI-QCIC-80922 - Special Acceptance Inspection Equipment Operating Manual
- DI-QCIC-80924 - Semiconductor Process Specification
- DI-QCIC-81005 - Special Inspection Equipment Operating Instructions
- DI-QCIC-81006 - Special Inspection Equipment Descriptive Documentation
- DI-QCIC-81007 - Special Inspection Equipment Calibration Procedures
- DI-QCIC-81009 - Technical Data Package Quality Control Program Plan
- DI-QCIC-81013 - Technical Data Package Validation Report
- DI-QCIC-81057 - Report, Watertight Integrity Status Bill (Wisb) for Submarines
- DI-QCIC-81068 - End Item Final Inspection Record (FIR)
- DI-QCIC-81110 - Inspection and Test Plan
- DI-QCIC-81111 - Summary of Precision Measurement Equipment Laboratory (PMEL) Total Quality
- DI-QCIC-81115 - Sampling Design Plan
- DI-QCIC-81187 - Quality Assessment Report
- DI-QCIC-81198 - Product Assurance Quality Program Plan
- DI-QCIC-81199 - Product Quality Assurance Test, Demonstration and Evaluation Plan
- DI-QCIC-81200 - Quality Inspection Test, Demonstration, and Evaluation Report
- DI-QCIC-81201 - Diagnostic Test and Failure Analysis of Microelectronic Devices (Vhsic/Vlsi/Mimic)
- DI-QCIC-81298 - Quality Assurance (Qa) Checklist Report for Surface Deck Preparation
- DI-QCIC-81379 - Quality System Plan
- DI-QCIC-81536 - Test Information Sheet (Tis)
- DI-QCIC-81611 - Precision Measurement Equipment Laboratory (PMEL) Quality Manual - Withdrawn, No Replacement
- DI-QCIC-81689 - Security Verification Plan and Procedures
- DI-QCIC-81690 - Security Verification Report
- DI-QCIC-81691 - In-Process Accounting Procedures Plan
- DI-QCIC-81706 - Destructive Physical Analysis Plan
- DI-QCIC-81707 - Destructive Physical Analysis Report
- DI-QCIC-81708 - Non-Standard Part Qualification/Quality Conformance Test Plan
- DI-QCIC-81722 - Quality Program Plan (Qpp)
- DI-QCIC-81794 - Quality Assurance Program Plan
- DI-QCIC-81795 - Software Quality Assurance Report
- DI-QCIC-81822 - Engineering Judgement Record (Ejr)
- DI-QCIC-81870 - Alteration Installation Team Quality Assurance Workbook
- DI-QCIC-81890 - Qualification Test Report (QTR)
- DI-QCIC-81891 - Acceptance Test Report (ATR)
- DI-QCIC-81960 - Measurement System Evaluation (MSE) - Measurement and Inspection Equipment System Design Documentation for Acceptance of Product
- DI-QCIC-82089 - Hydrostatic Test Report
- DI-QCIC-82111 - Coating System Data Report
- DI-QCIC-82405 - DI-QCIC-82405
- DOD-STD-2101 - Classification of Characteristics
- DOD-STD-2106 - Development of Shipboard Industrial Test Procedures
- DOD-STD-2107 - Product Assurance Program Requirements for Contractors
- DOD-STD-2168 - Defense System Software Quality Program
- MIL-C-45662 - Calibration System Requirements (Superseded by MIL-STD-45662
- MIL-HBDK-831 - Preparation of Test Reports
- MIL-HDBK-106 - Multi-Level Continuous Sampling Procedures and Tables for Inspection by Attributes (SUPERSEDED BY MIL-STD-1235)
- MIL-HDBK-107 - Inspection & Quality Control Single Level Continuous Sampling Procedures & Tables for Inspection by Attributes (Superseded by MIL-STD-1235)
- MIL-HDBK-108 - Quality Control and Reliability - Sampling Procedures and Tables for Life and Reliability Testing (Based on Exponential Distribution) (No Superseding Document)
- MIL-HDBK-109 - Quality Control and Reliability - Statistical Procedures for Determining Validity of Suppliers Attributes Inspection of
- MIL-HDBK-1839 - Calibration and Measurement Requirements
- MIL-HDBK-1916 - Companion Document to MIL-STD-1916
- MIL-HDBK-286 - A Guide for DOD-STD-2168, Defense System Software Quality Program (No Superseding Document)
- MIL-HDBK-334 - Evaluation of a Contractor's Software Quality Assurance Program (No Superseding Document)
- MIL-HDBK-350 - A Guide for MIL-STD-1520 Corrective Action an Disposition System for Nonconforming Material
- MIL-HDBK-404 - Calculation and Design of Master Gears
- MIL-HDBK-53 - Guide for Sampling Inspection
- MIL-HDBK-53/1 - Guide for Attribute Lot Sampling Inspection and MIL-STD-105 (No Superseding Document)
- MIL-HDBK-682 - Tolerancing, Dimensioning, and Gaging Techniques for the Design of Inspection Equipment
- MIL-HDBK-683 - Statistical Process Control (Spc) Implementation and Evaluation Aid
- MIL-HDBK-792 - Prove Out of Production Facilities
- MIL-HDBK-831 - Preparation of Test Reports
- MIL-HDBK-9000 - Guidance on the Application of ISO-9000/Asqc Q90 Series Quality System Standards
- MIL-HDBK-H57 - Procurement Quality Assurance
- MIL-I-45208 - Inspection System Requirements
- MIL-I-45607 - Inspection Equipment, Acquisition, Maintenance and Disposition of
- MIL-P-21549 - Product Quality Program Requirements for Flee
- MIL-P-45971 - Product Engineering Quality Engineering System (Peqes), for Weapons and Support Materiel (No Superseding Document)
- MIL-Q-22631 - Quality Control of Metal Wrought Products Except Forgings Procured to Non-Governmental Specification (NO SUPERSEDING Document)
- MIL-Q-45970 - Quality Assurance for Weapons and Support Material (Cancelled 1987, Replaced by MIL-W-63150)
- MIL-Q-5923 - Quality Control Requirements, General (Superseded by MIL-Q-9858)
- MIL-Q-9858 - Quality Program Requirements (No Superseding Document)
- MIL-S-52779 - Software Quality Assurance Program Requirements (Superseded by DOD-STD-2168)
- MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes (See Cancellation Notice 3 for Additional Information) Use ASQ-Z1.4 and MIL-STD-1916
- MIL-STD-109 - Quality Assurance Terms and Definitions (Refer To an Acceptable Non-Government Standard Such as ISO-8402 or ASQC-A8402)
- MIL-STD-1235 - Single and Multilevel Continuous Sampling Procedures and Tables for Inspection by Attributes (No Superseding Document)
- MIL-STD-1235/1 - Single and Multi Level Continuous Sampling Procedures and Tables for Inspection by Attributes Functional Curves of the Continuous Sampling Plans (Superseded by MIL-STD-1235)
- MIL-STD-1520 - Corrective Action and Disposition System for Nonconforming Material (No Superseding Document)
- MIL-STD-1535 - Supplier Quality Assurance Program Requirements (No Superseding Document)
- MIL-STD-1556 - Government/Industry Data Exchange Program Contractor Participation Requirements (for Guidance - Gidep Operations Manual and MIL-HDBK-965)
- MIL-STD-1586 - Quality Program Requirements for Space and Launch Vehicles (Refer To an Acceptable Non-Government Standard Such as ISO-9001 or ASQC-Q9001)
- MIL-STD-1767 - Procedures for Quality Assurance and Configuration Control of Icbm Weapon System Technical Publications/Data (No Superseding Document)
- MIL-STD-1839 - Calibration and Measurement Requirements
- MIL-STD-1916 - DOD Preferred Methods for Acceptance of Product
- MIL-STD-2106 - Development of Shipboard Industrial Test Procedures
- MIL-STD-252 - Classification of Visual and Mechanical Defects for Equipment, Electronic, Wired, and Other Devices
- MIL-STD-342 - Procedure for Lubricating Oil Flow Check
- MIL-STD-343 - Trace Element, Limits of (No Superseding Document)
- MIL-STD-40001 - Preparation of Final Inspection Record (Fir) (No Superseding Document)
- MIL-STD-40008 - Pneumatic Pressure Testing Parts With Permanent Joints: Welds, Brazes, and Rivets (Metric) (No Superseding Document)
- MIL-STD-414 - Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming
- MIL-STD-45662 - CALIBRATION SYSTEMS REQUIREMENTS (REPLACED BY ISO-10012 and ANSI-Z540.3)
- MIL-STD-831 - Test Reports, Preparation of (Superseded by MIL-HDBK-831)
- MIL-STD-908 - PROVISIONS FOR EVALUATING THE QUALITY OF SPARE PARTS FOR MECHANICAL and TEXTILE END ITEMS (NO SUPERSEDING DOCUMENT)
- MIL-STD-980 - Foreign Object Damage (Fod) Prevention in Aerospace Products (No Superseding Document)
- MIL-T-50301 - Technical Data; Quality Control System Requirements for (Superseded by MIL-T-47500)
- NAS-412 - Foreign Object Damage/Foreign Object Debris (FOD) Prevention
- THE FDA AND WORLDWID - The FDA and Worldwide Quality System Requirements Guidebook for Medical Devices