FSC Standardization Area NDTI: Nondestructive Testing and Inspection
The following documents are a part of this series:
ASTM:
US GOVERNMENT DOCUMENTS:
- AMS-2175 - Castings, Classification and Inspection of
- AMS-2301 - Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
- AMS-2303 - Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure
- AMS-2610 - Pressure Testing, Gaseous Media, Pressure as Specified
- AMS-2616 - Pressure Testing, Hydraulic, 200 Psi
- AMS-2620 - Pressure Testing, Hydraulic, 1000 Psi
- AMS-2625 - Pressure Testing, Hydraulic, 2500 Psi
- AMS-2630 - Inspection, Ultrasonic, Product Over 0.5 Inch (12.7 mm) Thick
- AMS-2631 - Ultrasonic Inspection, Titanium and Titanium Alloy Bar, Billet and Plate
- AMS-2632 - Inspection, Ultrasonic, of Thin Materials, 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
- AMS-2633 - Ultrasonic Inspection, Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders (STABILIZED Oct 2017)
- API-2550 - Method for Measurement & Calibration of Upright Cylindricaltanks
- ARP-4462 - Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
- AWS-A2.2 - Nondestructive Testing Symbols - 1958 (Replaced by AWS-a2.4)
- DI-NDTI-80492 - Production Test Report
- DI-NDTI-80566 - Test Plan
- DI-NDTI-80603 - Test Procedure
- DI-NDTI-80604 - Test Report
- DI-NDTI-80648 - Nondestructive Inspection Program Plan
- DI-NDTI-80674 - Radiographic Inspection Plan
- DI-NDTI-80808 - Test Plans/Procedures
- DI-NDTI-80809 - Test/Inspection Report
- DI-NDTI-80884 - Randomizer Test Report
- DI-NDTI-81284 - Test and Evaluation Program Plan (Tepp)
- DI-NDTI-81307 - First Article Qualification Test Plan and Procedures
- DI-NDTI-81322 - Equipment Bench, Pre-Flight, and Flight Test Procedures
- DI-NDTI-81323 - Engineering Data on Equipment Submitted for Testing
- DI-NDTI-81583 - Equipment Inspection and Testing Report
- DI-NDTI-81585 - Reliability Test Plan
- DI-NDTI-81587 - Vibration Survey Report
- DI-NDTI-81895 - Engine Control System Component Test Plan Documentation Requirements
- DI-NDTI-81896 - Engine Control System Component Similarity Argument Report Documentation Requirements
- DI-NDTI-81897 - Engine Control System Component Test Report Documentation Requirements
- DI-NDTI-81936 - Non-Destructive Testing Training Program
- DI-NDTI-81942 - Recurring Hardware Requirements Verification Documentation
- DI-NDTI-82095 - Ultrasonic Test (UT) Report
- DI-NDTI-82110 - Air Test Report
- DI-NDTI-82181 - Nondestructive Inspection (NDI) Program Plan
- DI-NDTI-82326 - First Article Test/Inspection Procedures and Report (FAT/IPR)
- DI-NDTI-82327 - First Article Test/Inspection Procedures and Plan (FAT/IPP)
- MAM-2300 - Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure, Metric (SI) Measurement
- MAM-2301 - Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure, Metric (Si
- MIL-C-6021 - Casting, Classification & Inspection of (Superseded by MIL-STD-2175)
- MIL-DTL-19595 - Magnetic Effect Limits for Non-Magnetic Equipment Used in the Proximity of Magneitc Influence Ordnance
- MIL-G-62454 - Gear Bevel, Inspection of (Superseded by ANSI/AGMA-2000)
- MIL-HDBK-1264 - Radiographic Inspection for Soundness of Welds in Steel by Comparsion To Graded ASTM-E390 Reference Radiographs
- MIL-HDBK-1265 - Radiographic Inspection, Classification and Soundness Requirements for Steel Castings
- MIL-HDBK-1823 - Nondestructive Evaluation System Reliability Assessment
- MIL-HDBK-1890 - Inspection of Welded Joints
- MIL-HDBK-1899 - Pressure Testing, 10 Psi Through 200 Psi
- MIL-HDBK-54 - Electromagnetic Testing for (Inspection of Material) (Superseded by MIL-HDBK-728)
- MIL-HDBK-55 - Radiographic Nondestructive Testing Series (Superseded by MIL-HDBK-728)
- MIL-HDBK-6870 - Nondestructive Inspection Program Requirements for Aircraft and Missile Materials and Parts
- MIL-HDBK-726 - Ultrasonic Testing (Superseded by MIL-HDBK-728)
- MIL-HDBK-728/1 - Nondestructive Testing
- MIL-HDBK-728/2 - Eddy Current Testing
- MIL-HDBK-728/3 - Liquid Penetrant Testing
- MIL-HDBK-728/4 - Magnetic Particle Testing
- MIL-HDBK-728/5 - Radiographic Testing
- MIL-HDBK-728/6 - Ultrasonic Testing
- MIL-HDBK-731 - Nondestructive Testing Methods of Composite Materials - Thermography
- MIL-HDBK-732 - Nondestructive Testing Methods of Composite Materials Acoustic Emission
- MIL-HDBK-733 - Nondestructive Testing Methods of Composite Materials - Radiography
- MIL-HDBK-786 - Field Assurance of Acoustic Emission System Operation Using Simulated Acoustic Emission Events
- MIL-HDBK-787 - Nondestructive Testing Methods of Composite Materials - Ultrasonic
- MIL-HDBK-788 - Selection of Acoustic Emission Sensors
- MIL-HDBK-793 - Nondestructive Testing Techniques for Structural Composites
- MIL-I-46175 - Inspection and Testing of Ductile Cast Iron Grade 100-70-03, Ultrasonic (No Superseding Document)
- MIL-I-6866 - Inspection, Liquid Penetrant
- MIL-I-6868 - Inspection Process, Magnetic Particle (SUPERSEDED BY MIL-STD-1949)
- MIL-I-6870 - Inspection Program Requirements, Nondestructive, for Aircraft and Missile Materials and Parts (Replaced by MIL-HDBK-6870)
- MIL-I-83387 - Inspection Process, Magnetic Rubber (Superseded by SAE AMS-I-83387)
- MIL-I-8950 - Inspection, Ultrasonic, Wrought Metals, Process For (Cancelled, 1983, use MIL-STD-2154 (Now AMS-STD-2154)
- MIL-M-11472 - Magnetic-Particle Inspection, Process, for Ferromagnetic Materials (Superseded by MIL-STD-1949)
- MIL-M-19595 - Magnetic Effect Limits for Non-Magnetic Equipment Used in the Proximity of Magnetic In
- MIL-M-47230 - Magnetic Particle Inspection: Soundness Requirements for Materials, Parts, and Weldments (Superseded by MIL-STD-1907)
- MIL-P-46195 - Program Requirements, Nondestructive Inspection, for Weapons Systems, Subsystems, Parts and Materials (No Superseding Document)
- MIL-P-47158 - Penetrant Inspection, Soundness Requirements for Materials, Parts and Weldments (Superseded by MIL-STD-1907)
- MIL-R-11468 - Radiographic Inspection, Soundness Requirements for Arc & Gas Welds in Steel (Superseded by MIL-STD 1264)
- MIL-R-11469 - Radiographic Inspection, Classification & Soundness Requirement for Steel Casting (Superseded by MIL- STD-1265)
- MIL-R-11470 - Radiographic Inspection: Qualification of Equipment, Operators and Procedures (Superseded by MIL-STD-453)
- MIL-R-45226 - Radiographic Inspection of Graphite (No Superseding Document)
- MIL-R-45774 - Radiographic Inspection, Soundness Requirements For Fusion Welds In Aluminum And Magnesium Missile Components
- MIL-STD-1257 - Radiographic and Visual Soundness Requirements for Cobalt-Chromium Alloy Liners (for Small Arms Barrels)
- MIL-STD-1263 - Qualification and Certification of Inspection Personnel (Ultrasonics) (Canceled, 1982, Superseded by MIL-STD-410)
- MIL-STD-1264 - Radiographic Inspection for Soundness of Welds in Steel by Comparison To Graded ASTM E390 Reference Radiographs (Superseded by MIL-HDBK-1264)
- MIL-STD-1265 - Radiographic Inspection, Classification and Soundness Requirements for Steel Castings (Superseded by MIL-HDBK-1265)
- MIL-STD-139 - Radiographic Inspection, Soundness Requirements for Aluminum and Magnesium Castings (for Small Arms Parts)
- MIL-STD-1537 - Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method
- MIL-STD-1570 - Oil Analysis in Equipment Design, Provisions for (No Superseding Document)
- MIL-STD-1699 - Nondestructive Evaluation of Butt Welds in Crane and Railroad Rails
- MIL-STD-1875 - Ultrasonic Inspection, Requirements for (No Superseding Document)
- MIL-STD-1879 - Compressor Rotor Blades, Gas Turbine Tank Engine, Processing, Inspection, and Identification of (No Superseding Document)
- MIL-STD-1890 - Welded Joints, Inspection of (Superseded by MIL-HDBK-1890)
- MIL-STD-1891 - Bolts and Screws, Inspection of (No Superseding Document)
- MIL-STD-1894 - Radiographic Reference Standards and Radiographic Procedures for Partial-Penetration Steel Welds
- MIL-STD-1895 - Radiographic Reference Standards and Radiographic Procedures for Partial-Penetration Aluminum Welds
- MIL-STD-1896 - Joints, Brazed, Inspection of (No Superseding Document)
- MIL-STD-1899 - Pressure Testing, 10 Psi Through 200 Psi (No Superseding Document) (for Guidance Only Use MIL-HDBK-1899)
- MIL-STD-1907 - Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts, and Weldments
- MIL-STD-1945 - Glossary of Terms and Definitions for Acoustic Emission Testing Procedures (No Superseding Document)
- MIL-STD-1948 - Glossary of Terms and Definitions for Neutron Radiographic Testing (No Superseding Document)
- MIL-STD-1949 - Inspection, Magnetic Particle (Use ASTM-E1444)
- MIL-STD-2032 - Eddy Current Inspection of Heat Exchanger Tubing on Ships of the United States Navy
- MIL-STD-2035 - Nondestructive Testing Acceptance Criteria
- MIL-STD-2132 - Nondestructive Examination Requirements for Special Applications (With Change Notice Included)
- MIL-STD-2154 - Inspection, Ultrasonic, Wrought Metals, Process for (See Notice 1 for Replacement Information)
- MIL-STD-2175 - Castings, Classification and Inspection of (Superseded by SAE AMS--STD-2175)
- MIL-STD-2195 - Inspection Procedure for Detection and Measurement of Dealloying Corrosion on Aluminum Bronze and Nickel-Aluminum Bronze Components
- MIL-STD-271 - Requirements for Nondestructive Testing Methods (Replacement Document Navsea Tech Pub T9074-as-GIB-010/271)
- MIL-STD-288 - Inspection Procedure for Determining the Magnetic Permeability of Wrought Austenitic Steel (Superseded by MIL-STD-2142)
- MIL-STD-369 - Glossary of Terms and Definitions for Radiographic Testing (Superseded by ASTM-E1316)
- MIL-STD-370 - Visual Acceptance Criteria for Inspection of Aluminum Alloy Welds (See Notice 2 for Replacement Information)
- MIL-STD-371 - Glossary of Terms and Definitions for Ultrasonic Testing Procedures (Superseded by ASTM-E1316)
- MIL-STD-40006 - Chromium Plate; Visual Inspection of (Metric) (No Superseding Document)
- MIL-STD-410 - Nondestructive Testing Personnel Qualification and Certification (See NAS-410 as a Possible Replacement)
- MIL-STD-453 - Inspection, Radiographic (Superseded by ASTM-E1742)
- MIL-STD-6866 - Inspection, Liquid Penetrant (Superseded by ASTM-E1417)
- MIL-STD-746 - Radiographic Testing Requirements for Cast Explosives
- MIL-STD-770 - Ultrasonic Inspection of Lead (Classified, See Your Contracting Officer)
- MIL-STD-779 - Reference Radiographs for Steel Welds (Superseded by ASTM-E390)
- MIL-STD-779/1 - Reference Radiographs for Steel Welds (Cancelled, See ASTM-E390
- MIL-STD-779/2 - Reference Radiographs for Steel Welds (Superseded by ASTM-E390)
- MIL-STD-779/3 - Reference Radiographs for Steel Welds (Superseded by ASTM-E390)
- MIL-STD-798 - Nondestructive Testing, Welding, Quality Control, Material Control and Identification and Hi-Shock Test Requirements for Piping System Components for Naval Shipboard Use
- MIL-STD-867 - Temper Etch Inspection
- MIL-U-81055 - Ultrasonic Inspection, Immersion, of Wrought Metal, General Specification for (for Torpedo Mk 46 Mod 0) (No Superseding Document)
- NAS-999 - Nondestructive Inspection of Advanced Composite Structures