FSC Standardization Area IPSC: Information Processing Standards for Computers
The following documents are a part of this series:- ANSI/INCITS-19 PDF - Eleven-Sixteenths Inch Perforated Paper Tape for Information
- ANSI/INCITS-34 - Interchange Rolls of Perforated Tape for Information Interchange (formerly ANSI X3.34-
- ANSI-X3.11 - Specification for General Purpose Paper Cards for Information Processing
- ANSI-X3.19 - Eleven-Sixteenths-Inch Perforated Paper Tape for Information Interchange (Now ANSI/INCITS-19)
- ANSI-X3.2 - Magnetic Ink Character Recognition, Print Specifications For
- ANSI-X3.34 - Interchange Rolls of Perforated Tape for Information Interchange
- ANSI-X3.37 - For Information Technology - Programming Language - Apt
- ANSI-X3.52 - Unrecorded Single Disk Cartridge (Front Loading, 2200 BPI),General, Physical, & Magnetic
- ANSI-X3.53 - Programming Language Pl/I
- ANSI-X3.55 - Unrecorded Magnetic Tape Cartridge for Information Interchange - 0.250 Inch (6.30 mm), 160
- ANSI-X3.58 - Unrecorded Eleven-Disk Pack - General, Physical & Magnetic Requirements
- ANSI-X3.9 - Programming Language - Fortran
- ANSI-Y14.26M - Digital Representation for Communication of Product Definition Data
- DI-IPSC-80110 - Automatic Data Processing Equipment Status Reports
- DI-IPSC-80122 - Communications-Computer Systems Requirements (Csrd)
- DI-IPSC-80409 - Integrated Circuit Graphics Database
- DI-IPSC-80423 - Data Dictionary Directory Metadata Product
- DI-IPSC-80590 - Computer Program End Item Documentation
- DI-IPSC-80689 - Functional Description (Fd) Document for Automated Information Systems (Ais)
- DI-IPSC-80690 - System/Subsystem Specification (Ss) Document for Automated Information Systems (Ais)
- DI-IPSC-80691 - Software Unit Specification (Us) Document for Automated Information Systems (Ais)
- DI-IPSC-80692 - Database Specification (DS) Document for Automated Information Systems (Ais)
- DI-IPSC-80693 - Users Manual (Um) Document for Automated Information Systems (Ais)
- DI-IPSC-80694 - End User Manual (Em) Document for Automated Information Systems (Ais)
- DI-IPSC-80695 - Computer Operation Manual (Om) Document for Automated Information Systems (Ais)
- DI-IPSC-80696 - Maintenance Manual (mm) Document for Automated Information Systems (Ais)
- DI-IPSC-80697 - Test Plan (Pt) Document for Automated Information Systems (Ais)
- DI-IPSC-80698 - Test Analysis Report (Rt) Document for Automated Information Systems (Ais)
- DI-IPSC-80699 - Implementation Procedures (IP) Document for Automated Information Systems (Ais)
- DI-IPSC-80942 - Computer Software System Document
- DI-IPSC-81316 - Information Processing Equipment (Ipe) Functional Configuration Audit (Fca) Plan
- DI-IPSC-81353 - Computer-Aided Acquisition and Logistics Support Implementation Plan (CALSIP)
- DI-IPSC-81427 - Software Development Plan (SDP)
- DI-IPSC-81428 - Software Installation Plan (SIP)
- DI-IPSC-81429 - Software Transition Plan (STRP)
- DI-IPSC-81430 - Operational Concept Description (OCD)
- DI-IPSC-81431 - System/Subsystem Specification (SSS)
- DI-IPSC-81432 - System/Subsystem Design Description (SSDD)
- DI-IPSC-81433 - Software Requirements Specification (SRS)
- DI-IPSC-81434 - Interface Requirements Specification (IRS)
- DI-IPSC-81435 - Software Design Description (SDD)
- DI-IPSC-81436 - Interface Design Description (IDD)
- DI-IPSC-81437 - Database Design Description (DBDD)
- DI-IPSC-81438 - Software Test Plan (STP)
- DI-IPSC-81439 - Software Test Description (STD)
- DI-IPSC-81440 - Software Test Report (STR)
- DI-IPSC-81441 - Software Product Specification (SPS)
- DI-IPSC-81442 - Software Version Description (SVD)
- DI-IPSC-81443 - Software User Manual (SUM)
- DI-IPSC-81444 - Software Center Operator Manual (SCOM)
- DI-IPSC-81445 - Software Input/Output Manual (SIOM)
- DI-IPSC-81446 - Computer Operation Manual (COM)
- DI-IPSC-81447 - Computer Programming Manual (CPM)
- DI-IPSC-81448 - Firmware Support Manual (FSM)
- DI-IPSC-81488 - Computer Software Product
- DI-IPSC-81490 - User's Manual for Gas Turbine Engine Steady State and Transient Performance Digital Computer Program
- DI-IPSC-81633 - Software Programmer's Guide
- DI-IPSC-81756 - Software Documentation
- DI-IPSC-82090 - Software Product Package (SPP)
- DI-IPSC-82134 - Software Sustainability Package
- DI-IPSC-82167 - Software Build Plan
- DI-IPSC-82208 - Software Development Process Description Document (SDPDD)
- DI-IPSC-82249 - Software Assurance Evaluation Report
- DI-IPSC-82250 - Software Attack Surface Analysis Report
- DI-IPSC-82251 - Software Threat Assessment Report
- DI-IPSC-82252 - Vulnerability Assessment Report
- DI-IPSC-82259 - Software/Hardware Requirements Specification (SHRS)
- DI-IPSC-82262 - Test String Configuration
- DI-IPSC-82284 - Software/Hardware Design Description (SHDD)
- DI-IPSC-82297 - Product Roadmap
- DI-IPSC-82298 - Product Backlog
- DI-IPSC-82360 - Functional Description Data (FDD)
- DI-IPSC-82412 - Software Metrics Plan
- DOD-STD-7935 - Automated Data Systems (Ads) Documentation (Cancelled, 1994, Superseded by MIL-STD-498)
- FIPS-0 - General Description of the Federal Information Processing Standards Register
- FIPS-1 - Code for Information Interchange
- FIPS-101 - Guideline for Lifecycle Validation, Verification, & Testingof Computer Software
- FIPS-11 - Guideline: American National Dictionary for Information Processing Systems (ANSI-X3.17
- FIPS-121 - Videotex/Teletext Presentation Level Protocol Syntax (Northamerican Plps) (ANSI X3.11
- FIPS-122 - Conformance Tests for Fips Pub 100 Version of CCITT 1980 Recommendation X.25, Etc.
- FIPS-13 - Rectangular Holes in Twelve-Row Punched Cards (Includes ANSI-X3.21-1967/R80)
- FIPS-14 - Hollerith Punched Card Code (Includes ANSI-X3.26)
- FIPS-15 - Subsets of the Standard Code for Information (Withdrawn, S/Sby FIPS-1)
- FIPS-16 - Bit Sequencing of the Code for Information Interchange in Serial by Bit Data Transmiss
- FIPS-161 - Electronic Data Interchange (Edi)
- FIPS-17 - Character Structure & Character Parity Sense for Serial by Bit Data Communication in T
- FIPS-18 - Character Structure & Character Parity Sense for Parallel-By-Bit Data Communication In
- FIPS-2 - Perforated Tape Code for Information Interchange (Includes ANSI-X3.6)
- FIPS-21 - Cobol, Software Standard, Programming Language (With ANSI X3.23-1985 & ANSI X3.23A-198
- FIPS-22 - Synchronous Signaling Rates Between Data Terminal & Data Communication (With ANSI-X3.1
- FIPS-24 - Flowchart Symbols & Their Usage in Formation Processing (Withdrawn)
- FIPS-25 - Recorded Magnetic Tape for Information Interchange (Withdrawn)Can'd,Superseded By ANSI-X3.39-
- FIPS-26 - One-Inch Perforated Paper Tape for Information Interchange (With ANSI X3.18-1967)
- FIPS-27 - Take-Up Reels for 1 Perforated Tape for Information Interchange (With ANSI X3.20-1967)
- FIPS-29 - Interpretation Procedures for Federal Information Processingstandard Programming Langu
- FIPS-3 - Recorded Magnetic Tape for Information Interchange (800 Cpi,Nrzi) (Withdrawn)
- FIPS-30 - Software Summary for Describing Computer Programs and Automated Data Systems
- FIPS-31 - Guidelines for Automatic Data Processing Physical Security and Risk Management
- FIPS-32 - Character Sets for Optical Character Recognition (Ocr)
- FIPS-33 - Character Set for Handprinting (Including ANSI-X3.45)
- FIPS-34 - Guide for the Use of International System of Units (Si) in Federal Information Process
- FIPS-35 - Code Extension Techniques in 7 or 8 Bits (Withdrwn Superseded By FIPS-1)
- FIPS-36 - Graphic Representation of the Control Characters of Ascii (Withdrawn Superseded By FIPS-1)
- FIPS-37 - Synchronous High Speed Data Signaling Rates Between Data Terminal Equipment & Data Com
- FIPS-39 - Glossary for Computer Systems Security (Withdrawn)
- FIPS-40 - Guidelines for Optical Character Recognition Forms
- FIPS-41 - Computer Security Guidelines for Implementing the Privacy Act of 1974
- FIPS-42 - Guidelines for Benchmarking Adp Systems in the Competitive Procurement Environment
- FIPS-43 - Aids for Cobol Program Conversion (Withdrawn)
- FIPS-44 - Cobol Coding Form (Withdrawn)
- FIPS-46 - Data Encryption Standard (Des)
- FIPS-47 - Federal Standard Cobol Pocket Guide (Withdrawn)
- FIPS-48 - Guideline on Evaluation of Techniques for Automated Personal Identification
- FIPS-49 - Guidelines on Computer Performance Management, an Introduction
- FIPS-50 - Recorded Magnetic Tape for Information Interc +Withdrawn +Superseded ByANSI-X3.54-73+
- FIPS-51 - Magnetic Tape Cassettes for Information Interchange (3.810mm[0.150 in] Tape at 32 Bpmm
- FIPS-52 - Recorded Magnetic Tape Cartridge for Information Interchange, 4-Track, 6.30mm (1/4 Inc
- FIPS-53 - Transmittal Form for Describing Computer Magnetic Tape File
- FIPS-54 - Computer Output Microform (Com) Formats & Reduction Ratios,16mm & 105mm (ANSI/AIIM-Ms
- FIPS-56 - Guideline for Managing Multivendor Plug Compatible Asdp Systems
- FIPS-57 - Guidelines for the Measurement of Interactive Computer Service Response Time & Turnaro
- FIPS-60 - I/O Channel Interface (Withdrawn)
- FIPS-61 - Channel Level Power Control Interface (Withdrawn)
- FIPS-62 - Operational Specifications for Magnetic Tape Subsystems (Withdrawn)
- FIPS-63 - Operational Specifications for Variable Block Rotating Massstorage Subsystems
- FIPS-65 - Guideline for Automatic Data Processing Risk Analysis
- FIPS-67 - Guideline for Selection of Data Entry Equipment
- FIPS-68 - Basic (ANSI X3.113-1987)
- FIPS-69 - Fortran, (ANSI-X3.9/R89)
- FIPS-7 - Implementation of the Code for Information Interchange & Related Media Standards
- FIPS-71 - Advanced Data Communication Control Procedures (Adccp) (Withansi X3.66-1979/R90)
- FIPS-72 - Guidelines for the Measurement of Remote Batch Computer Service
- FIPS-73 - Guidelines for Security of Computer Applications
- FIPS-74 - Guidelines for Implementing & Using the NBS Data Encryption Standard
- FIPS-75 - Guideline on Constructing Benchmarks for Adp System Acquisitions
- FIPS-76 - Guideline for Planning & Using a Data Dictionary System
- FIPS-77 - Guideline for Planning and Management of Database Applications
- FIPS-79 - Magnetic Tape Labels & File Structure for Information Interchange (Withdrawn)
- FIPS-80 - Guide for the Implementation of Federal Information Processing Standards in Acquisitio
- FIPS-81 - Des Modes of Operation
- FIPS-82 - Guideline for Inspection & Quality Control for Alphanumericcomputer Output Microforms
- FIPS-83 - Guideline on User Authentication Techniques for Computer Network Access Control
- FIPS-84 - Microfilm Readers (ANSI/AIIM-Ms20-1979)
- FIPS-85 - Optical Character Recognition (Ocr) Inks (With ANSI X3.86-1980)
- FIPS-86 - Additional Controls for Use With American National Standardcode for Information Inter
- FIPS-87 - Guidelines for Adp Contingency Planning
- FIPS-88 - Guideline on Integrity Assurance & Control in Database Administration
- FIPS-89 - Optical Character Recognition (Ocr) Character Positioning (With ANSI X3.93M-1981)
- FIPS-90 - Guideline for Optical Character Recognition (Ocr) Print Quality (ANSI X 3.99 - 1983)
- FIPS-93 - Parallel Recorded Magnetic Tape Cartridge for Information Interchange, 4-Track, 6.30mm
- FIPS-94 - Guideline on Electrical Power for Adp Instal Lions
- FIPS-96 - Guideline for Developing & Implementing a Charge System Fordata Processing Services
- FIPS-97 - Operational Specifications for Fixed Block Rotating Mass Storage Subsystems (Withdrawn
- FIPS-98 - Message Format for Computer Based Message Systems (Withdrawn)
- FIPS-99 - Guideline: a Framework for the Evaluation & Comparison of Software Development Tools
- IEEE-12207.0 - IEEE Standard for Industry Implementation of International Standard ISO/IEC 12207: 199
- IEEE-416 - Atlas Test Language
- MIL-HDBK-1862 - Nebula Instruction Set Architecture
- MIL-HDBK-2361 - Army Digital Publications Development Implementation Guide
- MIL-HDBK-28001 - Application of MIL-PRF-28001 using Standard Generalized Markup Language (SGML)
- MIL-HDBK-501 - Portable Information Carrier
- MIL-HDBK-804 - Network User ID and Password Procedures (No Replacement Document)
- MIL-HDBK-805 - Microcomputer Software & Hardware Guides
- MIL-HDBK-9660 - DOD Produced CD-ROM Products
- MIL-P-83497 - Procedures for Preparation of Programmed Tapes and Cards (No Superseding Document)
- MIL-PRF-28000 - Digital Representation for Communication of Product Data: IGES Application Subsets and IGES Application Protocols
- MIL-PRF-28001 - Markup Requirements and Generic Style Specification for Exchange of Text and Its Presentation
- MIL-PRF-28002 - Raster Graphics Representation in Binary Format, Requirements for
- MIL-PRF-28003 - Digital Representation for Communication of Illustration Data: CGM Application Profile
- MIL-STD-1588 - Jovial (J3)
- MIL-STD-1589 - Jovial (J73)
- MIL-STD-1644 - Trainer System Software Engineering Requirements (Superseded by DOD-STD-2167)
- MIL-STD-1679 - Software Development (Cancelled, Superseded by DOD-STD-2167)
- MIL-STD-1750 - Sixteen-Bit Computer Instruction Set Architecture
- MIL-STD-1753 - Fortran, DOD Supplement To American National Standard X3.9-1978 (No Superseding Document)
- MIL-STD-1777 - Internet Protocol (No Superseding Document)
- MIL-STD-1778 - Transmission Control Protocol (No Superseding Document)
- MIL-STD-1781 - Simple Mail Transfer Protocol (No Superseding Document)
- MIL-STD-1782 - Telnet Protocol (No Superseding Document)
- MIL-STD-1832 - Diskette Message File Formats for Defense Messaging
- MIL-STD-1840 - Automated Interchange of Technical Information
- MIL-STD-1862 - Nebula Instruction Set Architecture
- MIL-STD-2002 - Document Interchange Format
- MIL-STD-2301 - Computer Graphics Metafile (CGM) Implementation Standard for the National Imagery Transmission Format Standard
- MIL-STD-2361 - Digital Publications Development
- MIL-STD-2525 - Joint Military Symbology
- MIL-STD-498 - Software Development and Documentation (Superseded by IEEE/EIA 12207.0, IEEE/EIA 12207.1 and IEEE/EIA 12207.2)
- MIL-STD-974 - Contractor Integrated Technical Information Service (CITIS) (NO SUPERSEDING Document)
- MIL-STD-CITIS - Contractor Integrated Technical Information Service (Citis) (Cancelled, Superseded by MIL-STD-974)
- SS-112142 - Light metal - Tensile test piece type RA - Sand cast test piece
- SS-112171 - Butt welded joints - Tensile test pieces type FS
- STANAG-2321 - The Nato Code of Colours for the Identification of Ammunition (Except Ammunition of A