FSC Standardization Area FORG: Forgings
The following documents are a part of this series:
ASTM:
US GOVERNMENT DOCUMENTS:
- AMS-2808 - Identification Forgings (STABILIZED Mar 2017)
- AMS-4109 - Aluminum Alloy Hand Forgings 5.6Zn-2.5mg -1. 6 Cu - 0.24 Cr
- AMS-4126 - Aluminum Alloy, Die & Hand Forgings & Rolled Rings, 5.6Zn - 2.5mg - 1.6Cu - 0.23Cr (7
- AMS-4130 - Aluminum Alloy Die Forgings, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), Solution and Precipitation Heat Treated (STABILIZED Nov 2014)
- AMS-4132 - Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock, 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61), Solution and Precipitation Heat Treated
- AMS-4147 - Aluminum Alloy Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged
- AMS-4363 - Forgings, Magnesium Alloy, 2.0Th - 0.78Mn (Hm21A-T5) Precipitation Heat Treated
- AMS-4976 - Titanium Alloy, Forgings, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo, Solution and Precipitation Heat Treated
- AMS-4984 - Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength
- AMS-5704 - Nickel Alloy, Corrosion and Heat-Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
- AMS-5881 - Forgings, Alloy, Corrosion & Heat Resistant 59.5NI-12Cr-10Co-3.0mo-6.0W-3.0Ti-1.5TA-4.5al-
- AMS-A-22771 - Aluminum Alloy Forgings, Heat Treated
- AMS-F-7190 - Forging, Steel, For Aircraft/Aerospace Equipment and Special Ordnance Applications (STABILIZED Aug 2016)
- AMS-QQ-A-367 - Aluminum Alloy Forgings
- DI-FORG-80412 - Forging Manufacturing Sketch
- DI-FORG-80962 - First Article Forging Report
- DI-FORG-81177 - Rudder Stock Forging History
- DI-FORG-81195 - Repair Welding Approval Record for Forgings or Castings
- DI-FORG-81196 - Chemical and Physical Properties for Forging or Casting Analysis Report
- DOD-C-24676 - Copper-Nickel Alloy Bar, Rod and Forged Shapes, High Strength (Metric) (Cancelled, 1992, No Superseding Document)
- DOD-F-24669 - Forgings and Forging Stock, Steel Bars, Billets and Blooms, General Specification for (Metric)
- DOD-F-24669/1 - Forgings and Forging Stock, Steel (Carbon and Alloy) Blooms, Bars, Billets and Slabs (Metric
- DOD-F-24669/2 - Forgings and Forging Stock, Steel Bars and Billets - Chromium-Molybdenum Alloy (Metric)
- DOD-F-24669/3 - Forgings and Forging Stock, Steel Bars and Billets for Nitriding (Metric)
- DOD-F-24669/4 - FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS, NICKEL AND NICKEL-MOLYBENDUM modified hadfield; low magnetic permeability (metric) (NO SUPERSEDING DOCUMENT)
- DOD-F-24669/5 - Military Specification: Forgings and Forging Stock, Steel Bars, Billets and Wire (Chromium-Nickel-Phosphorous and Chromium-Nickel-Manganese-Phosphorous) Low Magnetic Permeability (Metric)
- DOD-F-24669/6 - Forgings and Forging Stock, Steel Bars and Billets, Corrosion Resisting; for Reforging (Metric)
- DOD-F-24669/7 - Forgings and Forging Stock, Steel Bars and Billets, Corrosion Resisting; Naval Steam Turbine Parts Use (Metric)
- MIL-A-22771 - Aluminum Alloy Forgings, Heat Treated (Superseded by SAE-AMS-A-22771)
- MIL-A-45225 - Aluminum Alloy Armor, Forged
- MIL-A-46083 - Aluminum Alloy Armor, Extruded, Weldable
- MIL-C-13351 - Copper Alloy Number 377 Forgings (No Superseding Document)
- MIL-C-24679 - Copper-Nickel Alloy Forgings and Forging Stdcl<
- MIL-DTL-13823 - Steel: Shapes, Rolled or Forged; Bars, Flats and Special Sections (for Armor)
- MIL-DTL-23194 - Steel, Forgings, Carbon and Low Alloy (UNS K13502, K12766 and K42365) CLASSIFIED - SEE YOUR CONTRACTING OFFICER
- MIL-DTL-45225 - Aluminum Alloy Armor, Forged
- MIL-DTL-46035 - Titanium Alloy: High Strength, Wrought (for Critical Components)
- MIL-DTL-46083 - Aluminum Alloy Armor, Extruded, Weldable
- MIL-F-24669/4 - Forgings and Forging Stock, Steel Bars and Billets, Nickel and Nickel-Molybdenum Modified Hadfield; Low Magnetic Permeability (Metric) (No Superseding Document)
- MIL-F-24669/5 - Forgines and Forging Stock, Steel Bars, Billets and Wire (Chromium-Nickel-Phosphorous
- MIL-F-24669/8 - Forgings and Forging Stock, Steel for Integral Steam Turbine Rotors
- MIL-F-45961 - Forging, Prealloyed Steel Powder (No Superseding Document)
- MIL-F-7190 - Forging, Steel, for Aircraft/Aerospace Equipment and Special Ordnance Applications (Superseded by SAE-AMS-F-7190)
- MIL-N-24687 - Nickel-Chromium-Molybdenun-Iron-Columbium Alloy Bars, and Forgings - Classified - See your Contracting Officer
- MIL-R-10185 - Rings, Breech, Steel Forgings for
- MIL-S-10520 - Steel, Forging, for Projectile Stock (Superseded by ASTM-a711 or ASTM-a575)
- MIL-S-13048 - Steel Forgings (for General Purpose Applications) (Superseded by MIL-S-46172)
- MIL-S-13823 - Steel: Shapes, Rolled or Forged; Bars, Flatsand Special Sections (for Armor)
- MIL-S-23009 - Steel Forgings, Alloy, High Yield Strength (HY-80 and HY-100)
- MIL-S-23194 - Steel Forgings, Carbon and Low Alloy
- MIL-S-23284 - Steel Forgings, Carbon and Alloy, for Shafts, Sleeves, Propeller Nuts, Couplings, and Stocks (Rudders and Diving Planes)
- MIL-S-24093 - Steel Forgings, Carbon and Alloy Heat Treated
- MIL-S-24093/1 - Steel Forgings, Carbon and Alloy Heat Treated (Class B, Alloy Steel, Round Bar)
- MIL-S-24093/2 - Steel Forgings, Carbon and Alloy Heat Treated (Class H, Carbon Steel, Hexagonal Bar)
- MIL-S-24093/3 - Steel Forgings, Carbon and Alloy Heat Treated (Class B, Alloy Steel, Hexagonal Bar)
- MIL-S-24512 - Steel Forgings, Alloy, Structural, High Yield Strength (HY-130)
- MIL-S-45203 - Steel Forgings (for Critical Applications), Use MIL-S-46172
- MIL-S-46053 - Steel, Forgings, Leaded Alloy (No Superseding Document)
- MIL-S-46119 - Steel Forgings, Tubular Parts for Cannon
- MIL-S-46172 - Steel Forgings
- MIL-S-860 - Steel Forgings for Steam Turbine Rotors (Superseded by MIL-F-24669/8)
- MIL-T-10458 - Tubular Parts for Cannons Over 30 mm, Steel Forgings for (Superseded by MIL-S-46119)
- MIL-T-13915 - Tubes, Steel, Seamless: for Cannons and Recoilless Rifles
- MIL-T-24585 - TITANIUM ALLOY ROD, DISCS AND UPSET FORGINGS COMPOSITION TI-6A1-6V-2SN (Classified, See Your Contracting Officer)
- MIL-T-24766 - Titanium Forgings and Forgings Stock, High Quality For Ships Service
- MIL-T-46035 - Titanium Alloy, High Strength, Wrought (for Critical Components)
- QQ-A-367 - Aluminum Alloy Forgings
- QQ-M-40 - Magnesium Alloy Forgings