FSC Standardization Area FACR: Facilities Engineering and Design Requirements
The following documents are a part of this series:
ASTM:
ISO:
US GOVERNMENT DOCUMENTS:
- AA-PK-1 - Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Castings and Ingot
- AASHTO-HB17 - Highway Bridges, Standard Specifications for (Use: AASHTO-HB)
- AASHTO-M118 - Bitumen, Coal-Tar, used in Roofing, Damp-Proofing, and Waterproofing
- AASHTO-M140 - Asphalt, Emulsified
- AASHTO-M145 - Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
- AASHTO-M147 - Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses
- AASHTO-M180 - Corrugated Sheet Steel Beams for Highway Guardrail
- AASHTO-M190 - Bituminous-Coated Corrugated Metal Culvert Pipe and Pipe Arches, Single User Digital Pub
- AASHTO-M198 - Joints for Concrete Pipe, Manholes and Precast Box Sections using Preformed Flexible Joint Sealants
- AASHTO-M20 - Penetration-Graded Asphalt Cement
- AASHTO-M200 - Standard Specification for Epoxy Protective Coatings (Withdrawn due to lack of use - no longer available)
- AASHTO-M208 - Standard Specification for Cationic Emulsified Asphalt
- AASHTO-M218 - Steel Sheet Zinc-Coated (Galvanized) for Corrugated Steel Pipe
- AASHTO-M219 - Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches and Arche
- AASHTO-M226 - Standard Specification for Viscosity-Graded Asphalt Cement
- AASHTO-M243 - Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches
- AASHTO-M248 - Standard Specification for Ready-Mixed White and Yellow Traffic Paints
- AASHTO-M252 - Corrugated Polyethylene Drainage Pipe
- AASHTO-M288 - Standard Specification for Geotextile Specification for Highway Applications
- AASHTO-M294 - Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
- AASHTO-M300 - Inorganic Zinc Rich Primer
- AASHTO-M314 - Steel Anchor Bolts
- AASHTO-M43 - Road and Bridge Construction, Sizes of Aggregate For
- AASHTO-M81 - Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- AASHTO-M82 - Standard Specification for Cutback Asphalt (Medium-Curing Type)
- AASHTO-M92 - Wire Cloth Sieves for Testing Purposes
- AASHTO-MP1 - Performance Graded Asphalt Binder
- AASHTO-MP2 - Superpave Volumetric Mix Design
- AASHTO-MP7 - Corrugated Polyethylene Pipe, Specification For
- AASHTO-T102 - Materials, Asphaltic, Spot Test Of
- AASHTO-T103 - Aggregates by Freezing and Thawing, Soundness Of
- AASHTO-T11 - Materials Finer Than 75 Micrometer (No. 200) Sieve in Mineral Aggregates by Washington
- AASHTO-T111 - Matter, Inorganic, or Ash in Bituminous Materials
- AASHTO-T134 - Mixtures, Soil-Cement, Moisture-Density Relations Of
- AASHTO-T135 - Mixtures, Compacted Soil-Cement, Wetting-&-Drying Test Of
- AASHTO-T136 - Mixtures, Compacted Soil-Cement, Freezing-&-Thawing Tests Of
- AASHTO-T166 - Bituminous Mixtures, Compacted, Using Saturated Surface-Dry Specimens, Bulk Specific G
- AASHTO-T176 - Sand Equivalent Test, Plastic Fines in Graded Aggregates and Soils by Use of The
- AASHTO-T182 - Mixtures, Bitumen-Aggregate, Coating & Stripping Of
- AASHTO-T193 - California Bearing Ratio
- AASHTO-T2 - Sampling of Aggregates
- AASHTO-T219 - Chemical Constituents and Particle Sizes, Testing Lime For
- AASHTO-T224 - Particles, Coarse, in the Soil Compaction Test, Correction For
- AASHTO-T230 - Pavement Compaction of Bituminous Aggregate Mixtures, Determining Degree of
- AASHTO-T259 - Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration
- AASHTO-T26 - Quality of Water To Be Used in Concrete
- AASHTO-T260 - Chloride Ion in Concrete and Concrete Raw Materials, Sampling and Testing For
- AASHTO-T27 - Sieve Analysis of Fine and Coarse Aggregates
- AASHTO-T30 - Mechanical Analysis of Extracted Aggregate
- AASHTO-T37 - Sieve Analysis of Mineral Filler for Bituminous Paving Materials
- AASHTO-T40 - Sampling Bituminous Materials
- AASHTO-T87 - Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test
- AASHTO-T89 - Determining the Liquid Limit of Sorts
- AASHTO-T90 - Soils, Determining the Plastic Limit and Plasticity Index Of
- ABMA-7 - Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller B
- AGA-XR-0104 - AGA Plastic Pipe Manual for Gas Service
- AGMA-6011 - Specification for High Speed Helical Gear Units
- AHRI-GUIDELINE F - Selection, Installation and Servicing of Residential Humidifiers - (I-P) Edition
- AHRI-GUIDELINE K(I-P - Containers for Recovered Non-Flammable Fluorocarbon Refrigerants
- AISC-S303 - Steel Buildings and Bridges, Code of Standard Practice for
- AISC-S335 - Buildings, Structural Steel, Allowable Stress Design and Plastic Design
- ANSI-A10.6 - Safety and Health Program Requirements for Demolition Operations
- ANSI-B16.12 - Cast Iron Threaded Drainage Fittings (ASME B16.12 - 2009)
- ANSI-B16.26 - Cast Copper Alloy Fittings for Flared Copper Tubes
- ANSI-B16.36 - Orifice Flanges - See ASME B16.36
- ANSI-B16.38 - Large Metallic Valves for Gas Distribution: Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
- AREMA-MANUAL FOR RAI - Manual for Railway Eng. & Portfolio Print
- ARI-260 - Sound Rating of Ducted Air Moving and Conditioning Equipment
- ARI-325 - Ground Water-Source Heat Pumps
- ARI-330 - Ground Source Closed-Loop Heat Pumps
- ARI-480 - Performance Rating of Remote Type Refrigerant-Cooled Liquid Coolers
- ARI-490 - Remote Mechanical-Draft Evaporative Refrigerant Condensers
- ARI-500 - Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units For
- ARI-510 - Positive Displacement Ammonia Compressors and Compressor Units
- ARI-620 - Self-Contained Humidifiers for Residential Application
- ARI-700 - Specifications for Fluorocarbon Refrigerants
- ARI-720 - Refrigerant Access Valves and Hose Connectors
- ARI-740 - Performance of Refrigerant Recovery/Recycling Equipment
- ARI-750 - Performance Rating of Thermostatic Refrigerant Expansion Valves
- ARI-760 - Performance Rating of Solenoid Valves for Use With Volatile Refrigerants
- ARI-DCAACP - Directory of Certified Applied Air-Conditioning Products
- ARI-DCUP - Directory of Certified Unitary Products
- ARI-GUIDELINE-D - Application and Installation of Central Station Air-Handling Units
- ARI-GUIDELINE-F - Humidifiers, Selection, Installation, and Servicing of Residential
- ARI-GUIDELINE-K - Containers for Recovered Fluorocarbon Refrigerants
- ARP-892 - Dc Starter - Generator, Engine, General Specification For
- ASCE-25-97 - Earthquake-Actuated Automatic Gas Shutoff Devices
- ASCE-2-91 - Measurement of Oxygen Transfer in Clean Water
- ASCE-7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures
- ASCE-REPORT NO 13 - Filtering Materials for Sewage Treatment Plants
- ASD-1 - Aluminum Standards and Data
- ASME-A17.2.2 - Inspectors' Manual for Hydraulic Elevators
- ASME-B16.28 - Wrought Steel Buttwelding Short Radius Elbows & Returns
- ASME-B16.34 - Valves -- Flanged, Threaded, and Welding End
- ASME-B16.36 - Orifice Flanges
- ASME-B16.40 - Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems
- ASME-B16.42 - Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300
- ASME-B18.2.3.7M - Metric Heavy Hex Structural Bolts
- ASME-B18.2.3.8M - Metric Hex Lag Screws
- ASME-B18.2.4.1M - Metric Hex Nuts, Style 1
- ASME-B18.2.4.6M - Metric Heavy Hex Nuts
- ASME-B18.6.1 - Wood Screws (Inch Series)
- ASME-B19.3 - Safety Standard for Compressors for Process Industries
- ASME-B30.2 - Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)
- ASME-B30.22 - Articulating Boom Cranes
- ASME-B30.5 - Mobile and Locomotive Cranes
- ASME-B30.8 - Floating Cranes and Floating Derricks
- ASME-B31.2 - Fuel Gas Piping
- ASME-B31.8 - Code on Gas Transmission and Distribution Piping Systems
- ASME-B46.1 - Surface Texture (Surface Roughness, Waviness, and Lay)
- ASSE-1002 - Anti-Siphon Fill Valves for Water Closet Tanks
- ASSE-1003 - Water Pressure Reducing Valves for Domestic Water Distribution Systems
- ASSE-1005 - Water Heater Drain Valve
- ASSE-1006 - Residential Use Dishwashers
- ASSE-1011 - Hose Connection Vacuum Breakers
- ASSE-1012 - Performance Requirements for Backflow Preventers With an Intermediate Atmospheric Vent
- ASSE-1013 - Performance Requirements for Reduced Pressure Principle Backflow Preventers & Reduced
- ASSE-1014 - Hand Held Showers
- ASSE-1015 - Performance Requirements for Double Check Backflow Prevention Asseblies & Double Check
- ASSE-1017 - Temperature Actuated Mixing Valves for Hot Water Distribution Systems
- ASSE-1018 - Trap Seal Primer Valves, Water Supply Fed
- AWS-D1.2A - Aluminum, Commentary on Structural Welding Code
- CSI-MP-2-1 - Masterformat, Master List of Numbers and Titles for the Construction Industry
- CSI-MP-2-2 - Construction Specification Sections, A Recommended Format for
- CSI-MP-2-3 - Construction Specifications, A Recommended Page Format for
- CSI-MP-2-4 - Uniformat - A Uniform Classification of Construction Systems and Assemblies
- CTI-STD-111 - Gear Speed Reducers
- CTI-STD-112 - Pressure Preservative Treatment of Lumber
- CTI-STD-134 - Plywood for Use in Cooling Towers
- DI-FACR-80142 - Pre-Installation Survey Report
- DI-FACR-80149 - Program Support Letter Addendum
- DI-FACR-80404 - Erection and Assembly Manual
- DI-FACR-80810 - Test Facility Requirements Document (Tfrd)
- DI-FACR-80966 - Trainer Facilities Report (Tfr)
- DI-FACR-80971 - Site Selection and Evaluation Report
- DI-FACR-80976 - Facilities Plan
- DI-FACR-80977 - Corrosion Control Data for Buried Utility Systems
- DI-FACR-81045 - Facilities Requirements Document for Typical Shore Based and Shipboard Sites
- DI-FACR-81046 - Site Evaluation Report
- DI-FACR-81047 - Support Site Activation Plan
- DI-FACR-81216 - Trainer Engineering Report
- DI-FACR-82279 - Installation Design Package
- DI-FACR-82283 - Installation Deficiency Test Report
- DI-FACR-82415 - Weapon Safety Fire Hazard Analysis
- EIA-160 - Sound Systems
- EIA-232 - Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange
- EIA-329 - Minimum Standards for Communication Antennas, Base Station Antennas
- EIA-330 - Electrical Performance Standards for Closed Circuit Television Camera 525/60 Interlaced 2:1
- EIA-374 - Land Mobile Signalling Standard
- EIA-375 - Electrical Performance Standards for Direct View Monochromeclosed Circuit Tv Monitors
- EIA-455 - General Requirements for Standard Test Procedures for Optical Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components
- EIA-455-104 - FOTP-104 Fiber Optic Cable Cyclic Flexing Test
- EIA-455-13 - Fotp 13, Visual & Mechanical Inspection of Fiber Optic Components, Devices, & Assembli
- EIA-455-46 - FOTP-46, Spectral Attenuation Measurement for Long-Length, Graded-Index Optical Fibers
- EIA-455-47 - FOTP-47, Output Farfield Radiation Pattern Measurement (ANSI/EIA/TIA-455-47-B-92)
- EIA-455-58 - FOTP-58, Core Diameter Measurement of Graded-Index Optical Fibers
- EIA-455-59 - FOTP-59, Measurement of Fiber Point Discontinuities Using Anotdr (ANSI/EIA/TIA-455-59)
- EIA-455-61 - FOTP-61, Measurement of Fiber or Cable Attenuation Using Anotdr (ANSI/TIA/EIA-455-61-
- EIA-455-78 - FOTP-78, IEC 60793-1-40, Optical Fibres - Part 1-40: Measurement Methods & Test Proced
- EIA-472D000 - Sectional Specification (Adopted ANSI/ICEA S-87-640-2006) Standard, Standard for Optic
- EIA-472DAAA - Detail Specification for All-Dielectric Fiberoptic Communications Cable for Outside Pl
- EIA-485 - Electrical Characteristics of Generators & Receivers for Use in Balanced Digital Multi
- EIA-492AAAA - Detail Specification for 62.5-mm Core Diameter/125mm Cladding Diameter Class Ia Graded
- EIA-492AAAB - Detail Specification for 50-mm Core Diameter/125-mm Cladding Diameter Class Ia Graded-
- EIA-492AAB - Fibers, 50-Um Diameter/125-Um Cladding Diameter Class Ia Graded-Index Multimode Optica
- EIA-492CAAA - DETAIL SPECIFICATION FOR CLASS IVa DISPERSION-UNSHIFTED SINGLE-MODE OPTICAL FIBERS
- EIA-526-14 - Optical Power Loss Measurement of Installed Multimode Fiber Cable Plant
- EIA-526-7 - Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant, Adoption of IEC 61280-4-2 edition 2: Fibre-Optic Communications Subsystem Test Procedures - Part 4-2: Installed Cable Plant - Single-Mode Attenuation and Optical Return Loss Measurement
- EIA-568 - Commercial Building Telecommunications Cabling Standard
- EIA-569 - Commercial Building Standard for Telecommunications Pathways and Spaces
- EIA-570 - Residential Telecommunications Infrastructure Standard
- EIA-590 - Standard for Physical Location & Protection of Below-Ground Fiber Optic Cable Plant
- EIA-606 - Administration Standard for Telecommunications Infrastructure
- EIA-758 - Customer-Owned Outside Plant Telecommunications Infrastructure Standard
- EIA-SEA-103 - Speakers for Sound Equipment
- FED-STD-795 - Uniform Federal Accessibility Standards
- IESNA-HB-9 - Lighting Handbook
- IESNA-LM-44 - Approved Method for Total and Diffuse Reflectometry
- IESNA-RP-8 - Roadway Lighting
- ISA-18.1 - Annunciator Sequences and Specifications
- ISA-51.1 - Process Instrumentation Terminology
- ISA-5.2 - Binary Logic Diagrams For Process Operations
- ISA-5.3 - Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic, and Computer Systems
- ISA-7.0.01 - Quality Standard for Instrument Air
- ISA-MC96.1 - Temperature Measurement Thermocouples
- ISA-RP60.9 - Piping Guide for Control Centers
- ISA-S12.13.1 - Part I - Performance Requirements, Combustible Gas Detectors
- MIL-BUL-34 - Engineering and Design Criteria for Navy Facilities (Superseded by MIL-HDBK-1001/1)
- MIL-BUL-340 - Engineering and Design Criteria for Navy Facilities
- MIL-BUL-35 - Matrix of Guide Specifications for Facilities Construction - Federal and Private (No Superseding Document)
- MIL-BUL-36 - U.S. Building Codes and Standards an Overview (No Superseding Document)
- MIL-DTL-41819/44 - Ribbon Attachment, Long Service Medal, U.S. Border Patrol
- MIL-HDBK-1000/1 - Engineering and Design Criteria and Documentation for Navy Facilities (Superseded by MIL-STD-3007)
- MIL-HDBK-1001/1 - Basic Architectural Requirements and Design Considerations
- MIL-HDBK-1001/2 - Materials and Building Components
- MIL-HDBK-1001/5 - Roofing and Waterproofing (Superseded by MIL-STD-3007)
- MIL-HDBK-1002 - Timber Structures
- MIL-HDBK-1002/1 - Structural Engineering General Requirements (Superseded by MIL-STD-3007)
- MIL-HDBK-1002/2 - Loads (Superseded by MIL-STD-3007)
- MIL-HDBK-1002/3 - Structural Engineering - Steel Structures
- MIL-HDBK-1002/5 - Timber Structures (Superseded by MIL-STD-3007)
- MIL-HDBK-1002/6 - Aluminum Structures, Composite Structures, Structural Plastics, and Fiber-Reinforced Composites (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/1 - Plumbing (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/11 - Diesel-Electric Generating Plants (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/12 - Boiler Controls (Superseded by MIL-STD-3007)
- MIL-HDBK-1003/13 - Solar Heating of Buildings and Domestic Hot Water (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/17 - Industrial Ventilation System (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/19 - Design Procedures for Passive Solar Buildings (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/2 - Incinerators
- MIL-HDBK-1003/6 - Central Heating Plants (Superseded by MIL-STD-3007)
- MIL-HDBK-1003/7 - Steam Power Plants - Fossil Fueled (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1003/8 - Exterior Distribution of Steam, High Temperature Water, Chilled Water, Natural Gas, and Compressed Air (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1004/1 - Electrical Engineering Preliminary Design Considerations (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1004/10 - Electrical Engineering Cathodic Protection
- MIL-HDBK-1004/2 - Power Distribution Systems
- MIL-HDBK-1004/3 - Switchgear and Relaying
- MIL-HDBK-1004/4 - Electrical Utilization Systems
- MIL-HDBK-1004/5 - 400-Hertz Medium-Voltage Conversion/Distribution and Low-Voltage Utilization Systems (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1004/6 - Lightning Protection (Use MIL-STD-3007)
- MIL-HDBK-1004/7 - Wire Communication and Signal Systems
- MIL-HDBK-1005/13 - Hazardous Waste Storage Facilities (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1005/16 - Wastewater Treatment System Design Augmenting Handbook
- MIL-HDBK-1005/17 - Nondomestic Wastewater Control and Pretreatment Design Criteria
- MIL-HDBK-1005/2 - Hydrology
- MIL-HDBK-1005/3 - Drainage Systems
- MIL-HDBK-1005/6 - Trackage (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1005/7 - Water Supply Systems
- MIL-HDBK-1005/8 - Domestic Wastewater Control
- MIL-HDBK-1005/9 - Industrial and Oily Wastewater Control (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1006/1 - Policy and Procedures for Project Drawing and Specification Preparation (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1006/2 - Policy and Procedures for Guide Specification Preparation (Superseded by MIL-STD-3007)
- MIL-HDBK-1006/3 - Policy and Procedures for Engineering and Design Criteria Manual Preparation (Superseded by MIL-STD-3007 and UFC-1-300-01)
- MIL-HDBK-1006/4 - Policy and Procedures for Definitive and Standard Design and Standard Specification Preparation (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1007/3 - Soil Dynamics and Special Design Aspects (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1008 - Fire Protection for Facilities Engineering, Design and Construction (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1010 - Cost Engineering: Policy and Procedures (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1010/1 - Cost Engineering: Policy and Procedures (No Superseding Document)
- MIL-HDBK-1010/2 - Cost Engineering: Historical Cost Data (No Superseding Document)
- MIL-HDBK-1011/1 - Tropical Engineering (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1011/2 - Cooling Buildings by Natural Ventilation (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1012/1 - Electronic Facilities Engineering
- MIL-HDBK-1012/3 - Telecommunications Premises Distribution Planning, Design, and Estimating
- MIL-HDBK-1013/1 - Design Guidelines for Physical Security of Facilities
- MIL-HDBK-1013/10 - Design Guidelines for Security Fencing, Gates, Barriers, and Guard Facilities (Use MIL-STD-3007)
- MIL-HDBK-1013/11 - Instruction for Planning and Design of High Security Magazine Door Construction Projects
- MIL-HDBK-1013/12 - Evaluation and Selection Analysis of Security Glazing for Protection Against Ballistic, Bomb, and Forced Entry Tactics
- MIL-HDBK-1013/14 - Selection and Application of Vehicle Barriers
- MIL-HDBK-1013/3 - Bolt-on Installation and Checkout Procedures for the High-Security Hasp With or Without Anti-Intrusion Bar Cover (No Superseding Document)
- MIL-HDBK-1013/4 - Instruction for Design, Fabrication, and Construction/Installation of Secure Enclosures
- MIL-HDBK-1013/5 - Steel-Ply Wall Hardening Selection and Installation Guide
- MIL-HDBK-1013/7 - Security Hardware Installation, Operation, and Maintenance
- MIL-HDBK-1013/8 - Combination Locks
- MIL-HDBK-1015/1 - Electroplating Facilities
- MIL-HDBK-1015/2 - Chemical Engineering Electroplating Technical Synopsis
- MIL-HDBK-1021/1 - Airfield Geometric Design (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1021/2 - General Concepts for Airfield Pavement Design (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1021/4 - Rigid Pavement Design for Airfields
- MIL-HDBK-1021/6 - Airfield Pavement Design for Frost Conditions and Subsurface Drainage
- MIL-HDBK-1022 - Petroleum Fuel Facilities
- MIL-HDBK-1023/1 - Airfield Lighting (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1023/4 - Maintenance of Visual Air Navigation Facilities (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1024/1 - Aviation Operational & Support Facilities
- MIL-HDBK-1024/2 - Helium Plants and Storage (No Superseding Document)
- MIL-HDBK-1024/3 - Oxyacetylene and Nitrogen and Breathing Oxygen Facilities
- MIL-HDBK-1025/1 - Piers and Wharves (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1025/10 - Safety of Electrical Transmission and Distribution Systems (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1025/2 - Dockside Utilities for Ship Service (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1025/3 - Cargo Handling Facilities (No Superseding Document)
- MIL-HDBK-1025/4 - Seawalls, Bulkheads, and Quaywall (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1025/5 - Ferry Terminals and Small Craft Berthing Facilities (No Superseding Document)
- MIL-HDBK-1025/6 - General Criteria for Waterfront Construction (SUPERSEDED BY MIL-STD-3007)
- MIL-HDBK-1027/1 - Firefighting School Facilities
- MIL-HDBK-1027/3 - Range Facilities and Miscellaneous Training Facilities Other Than Buildings
- MIL-HDBK-1027/4 - Aviation Training Facilities
- MIL-HDBK-1028/1 - Aircraft Maintenance Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1028/3 - Maintenance Facilities for Ammunition, EXPLO-Sives, & Toxinsns
- MIL-HDBK-1028/5 - Environmental Control - Design of Clean Rooms (Superseded by MIL-STD-3007)
- MIL-HDBK-1028/6 - Aircraft Fixed Point Utility Systems
- MIL-HDBK-1028/8 - Design of Pest Management Facilities (See Notice 1 for Replacement Information)
- MIL-HDBK-1029/1 - Graving Drydocks
- MIL-HDBK-1029/2 - Marine Railways
- MIL-HDBK-1029/3 - Drydocking Facilities Characteristics
- MIL-HDBK-1032/2 - Covered Storage (Superseded by MIL-STD-3007)
- MIL-HDBK-1034 - Administrative Facilities
- MIL-HDBK-1035 - Family Housing
- MIL-HDBK-1036 - Bachelor Housing
- MIL-HDBK-1036/4 - Enlisted Dining Facilities
- MIL-HDBK-1037/2 - Child Development Centers
- MIL-HDBK-1037/3 - Outdoor Sports and Recreational Facilities
- MIL-HDBK-1037/4 - Brigs and Detention Facilities
- MIL-HDBK-1037/7 - Officers, Non-Commissioned Officers Dining Facilities: Open Enlisted Dining Facilities
- MIL-HDBK-1038/3 - Yard Craft
- MIL-HDBK-1038/5 - Towing Nonself-Propelled Floating Structures
- MIL-HDBK-1040 - Basic Guidelines for Chemical Warfare Hardening of New Military Facilities
- MIL-HDBK-1102/7 - Concrete Pavement Repair
- MIL-HDBK-1110/1 - Handbook for Paints and Protective Coatings for Facilities
- MIL-HDBK-1114/2 - Maintenance and Operation of Heating Systems
- MIL-HDBK-1119 - Food Service Equipment
- MIL-HDBK-1125/1 - Maintenance and Operation of Central Heating Plants
- MIL-HDBK-1130 - Inactivation, Caretaker Maintenance, Reactivation, and Closure of Shore Facilities
- MIL-HDBK-1133 - Estimating Energy and Water Consumption for Shore Facilities and Cold Iron Support for Ships
- MIL-HDBK-1151 - Handbook for Inspection, Maintenance and Operation of Naval Reserve Centers
- MIL-HDBK-1165 - Water Conservation
- MIL-HDBK-1190 - Facility Planning and Design Guide
- MIL-HDBK-1195 - Radio Frequency Shielded Enclosures
- MIL-HDBK-1197 - Aero-Acoustics Test Programs
- MIL-HDBK-353 - Planning and Commissioning Wastewater Treatment Plants
- MIL-P-9879 - Photographing of Construction/Architectural Drawings, Maps and Related Documents, 105mm; Requirements for (No Superseding Document)
- MIL-PRF-39014/20 - Capacitors, Fixed, Ceramic Dielectric (General Purpose), Established Reliability, Style CKR08
- MIL-STD-3007 - Standard Practice for Unified Facilities Criteria and Unified Facilities Guide Specifications
- MIL-STD-619 - Unified Soil Classification System for Roads, Airfields, Embankments and Foundations (No Superseding Document)
- MIL-STD-620 - Test Methods for Bituminous Paving Materials (No Superseding Document)
- MIL-STD-621 - Subgrade, Subbase, and Test Method for Pavement Base-Course Materials (No Superseding Document)
- MSS-SP-104 - Wrought Copper Solder-Joint Pressure Fittings
- MSS-SP-43 - Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
- MSS-SP-44 - Steel Pipeline Flanges
- MSS-SP-53 - Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components - Magnetic Particle Exam Method
- MSS-SP-54 - Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Radiographic Examination Method
- MSS-SP-73 - Brazing Joints for Copper and Copper Alloy Pressure Fittings
- MSS-SP-81 - Stainless-Steel or Stainless-Steel-Lined, Bonnetless, Knife Gate Valves with Flanged Ends
- MSS-SP-84 - Valves - Socket Welding and Threaded Ends
- MSS-SP-85 - Gray Iron Globe and Angle Valves, Flanged and Threaded Ends
- MSS-SP-86 - Guidelines for Metric Data in Standards for Valves, Flanges, Fittings, and Actuators
- MSS-SP-88 - Diaphragm Valves
- NACE-RP0169 - Control of External Corrosion on Underground or Submerged Metallic Piping Systems
- NACE-RP0177 - Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems
- NACE-RP0178 - Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to be Lined for Immersion Service
- NACE-RP0185 - Extruded, Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe
- NACE-RP0188 - Discontinuity (Holiday) Testing of Protective Coatings on Conductive Substrates
- NACE-RP0190 - External Protective Coatings for Joints, Fittings, and Valves on Metallic Underground or Submerged Pipelines and Piping Systems
- NACE-RP0193 - External Cathodic Protection of On-Grade Metallic Storage Tank Bottoms
- NACE-RP0196 - Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
- NACE-RP0274 - High-Voltage Electrical Inspection of Pipeline Coatings Prior To Installation
- NACE-RP0288 - Inspection of Linings on Steel & Concrete
- NACE-RP0388 - Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Tanks
- NACE-RP0572 - Design, Installation, Operation and Maintenance of Impressed Current Deep Groundbeds
- NAS-3306 - Facility Requirements for Aircraft Operations
- NEMA-107 - Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus
- NEMA-AB1 - Circuit Breakers, Molded-Case, Molded Case Switches, and Circuit-Breaker Enclosures
- NEMA-AB3 - Molded-Case Circuit Breakers and Their Application
- NEMA-FU1 - Low Voltage Cartridge Fuses
- NEMA-HV2 - Application Guide for Ceramic Suspension Insulators
- NEMA-ICS10 - Part 2: Static Ac Transfer Equipment, Industrial Control & Systems Ac Transfer Equipme
- NEMA-ICS3.1 - Guide for the Application , Handling, Storage, Installation, & Maintenance of Medium-V
- NEMA-ICS4 - Application Guideline for Terminal Blocks
- NEMA-ICS7 - Adjustable Speed Drives
- NEMA-LL1 - Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLP
- NEMA-MG2 - Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators
- NEMA-OS2 - Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports
- NEMA-PE5 - Utility Type Battery Chargers
- NEMA-SG5 - Power Switchgear Assemblies
- NEMA-SG6 - Power Switching Equipment
- NEMA-TP1 - Guide for Determining Energy Efficiency for Distribution Transformers
- NEMA-WC70 - Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical E
- NEMA-WC74 - 5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy
- NFGS-00100 - Instructions to Bidders (Superseded By NFGS-00200)
- NFGS-00101 - Instructions to Offerers (SUPERSEDED BY NFGS-00150)
- NFGS-00102 - List of Drawings (Superseded by MIL-STD-3007)
- NFGS-00103 - Table of Contents (Superseded by NFGS-00010)
- NFGS-00200 - Instructions To Bidders
- NFGS-00201 - Instructions To Proposers
- NFGS-00202 - Evaluation Factors for Award
- NFGS-00451 - Representation & Certification for Contracting by Sealed Bids
- NFGS-00452 - Representations & Certifications for Contracting by Negotiation
- NFGS-00600 - Bonds & Certificates
- NFGS-00710 - Contract Clauses, Far 52.202 Through 52.228
- NFGS-00711 - Contract Clauses, Far 52.229 Through 52.252
- NFGS-00720 - Contract Clauses, Far 52.202 Through 52.228 (by Reference)
- NFGS-00721 - Contract Clauses, Far 52.229 Through 52.252 (by Reference)
- NFGS-00740 - Contact Clauses for Overseas
- NFGS-00830 - Davis-Bacon Wage Determination
- NFGS-01011 - Additional General Paragraphs (SUPERSEDED BY MIL-STD-3007)
- NFGS-01110 - Summary of Work (SUPERSEDED BY MIL-STD-3007)
- NFGS-01140 - Work Restrictions (SUPERSEDED BY MIL-STD-3007)
- NFGS-01150 - Special Project Procedures (SUPERSEDED BY MIL-STD-3007)
- NFGS-01200 - Price and Payment Procedures (SUPERSEDED BY MIL-STD-3007)
- NFGS-01310 - Administrative Requirements (SUPERSEDED BY MIL-STD-3007)
- NFGS-01320 - Construction Progress Documentation (SUPERSEDED BY MIL-STD-3007)
- NFGS-01321 - Network Analysis Schedules (NAS) (SUPERSEDED BY MIL-STD-3007)
- NFGS-01330 - Submittal Procedures (SUPERSEDED BY MIL-STD-3007)
- NFGS-01401 - Contractor Inspection System (SUPERSEDED BY NFGS-01400D)
- NFGS-01420 - References (SUPERSEDED BY MIL-STD-3007)
- NFGS-01450 - Quality Control (SUPERSEDED BY MIL-STD-3007)
- NFGS-01500 - Temporary Facilities and Controls (SUPERSEDED BY MIL-STD-3007)
- NFGS-01525 - Safety Requirements (SUPERSEDED BY MIL-STD-3007)
- NFGS-01572 - Waste Management (SUPERSEDED BY MIL-STD-3007)
- NFGS-01575 - Temporary Environmental Controls (SUPERSEDED BY MIL-STD-3007)
- NFGS-01580 - Project Identification (SUPERSEDED BY MIL-STD-3007)
- NFGS-01770 - Closeout Procedures (SUPERSEDED BY MIL-STD-3007)
- NFGS-01781 - Operation and Maintenance Data (SUPERSEDED BY MIL-STD-3007)
- NFGS-02115 - Removal and Disposal of Underground Storage Tanks (SUPERSEDED BY MIL-STD-3007)
- NFGS-02220 - Site Demolition (SUPERSEDED BY MIL-STD-3007)
- NFGS-02231 - Clearing and Grubbing (SUPERSEDED BY MIL-STD-3007)
- NFGS-02247 - Cement Stabilized [Base] [Subbase] Course at Airfields and Roads (SUPERSEDED BY NFGS-02713)
- NFGS-02301 - Earthwork for Structures and Pavements (SUPERSEDED BY MIL-STD-3007)
- NFGS-02302 - Excavation, Backfilling, and Compacting for Utilities (SUPERSEDED BY MIL-STD-3007)
- NFGS-02315 - Excavation and Fill (SUPERSEDED BY MIL-STD-3007)
- NFGS-02325 - Dredging (SUPERSEDED BY MIL-STD-3007)
- NFGS-02361 - Soil Treatment for Subterranean Termite Control (SUPERSEDED BY MIL-STD-3007)
- NFGS-02362 - Basaltic Termite Barrier (SUPERSEDED BY MIL-STD-3007)
- NFGS-02395 - Prestressed Concrete Fender Piling ( SUPERSEDED BY MIL-STD-3007)
- NFGS-02396 - Resilient Foam-Filled Marine Fenders (SUPERSEDED BY MIL-STD-3007)
- NFGS-02397 - Arch-Type Rubber Marine Fenders (SUPERSEDED BY MIL-STD-3007)
- NFGS-02398 - Pier Timberwork (SUPERSEDED BY MIL-STD-3007)
- NFGS-02441 - Trenchless Excavation Using Microtunneling (SUPERSEDED BY MIL-STD-3007)
- NFGS-02456 - Prestressed Concrete Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02457 - Steel Sheet Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02458 - Timber Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02459 - Cast-in-Place Concrete Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02460 - Steel H Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02461 - Wood Marine Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02466 - Pressure-Injected Footings (SUPERSEDED BY MIL-STD-3007)
- NFGS-02467 - Auger Cast Grout Piles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02468 - Drilled Foundation Caissons (SUPERSEDED BY MIL-STD-3007)
- NFGS-02510 - Water Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-02521 - Water Supply Well (SUPERSEDED BY MIL-STD-3007)
- NFGS-02525 - Wells, (Extraction) (Monitoring) (Superseded by MIL-STD-3007)
- NFGS-02530 - Sanitary Sewerage (SUPERSEDED BY MIL-STD-3007)
- NFGS-02546 - Cold-Milling of Bituminous Pavement (SUPERSEDED BY NFGS-02961)
- NFGS-02551 - Bituminous Prime Coat (SUPERSEDED BY NFGS-02743)
- NFGS-02552 - Exterior Shallow Trench Steam Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-02553 - Exterior Underground Steam Distribution System
- NFGS-02554 - Exterior Aboveground Steam Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-02555 - Exterior Fuel Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-02556 - Exterior Buried Pumped Condensate Return (SUPERSEDED BY MIL-STD-3007)
- NFGS-02557 - Exterior Buried Preinsulated Water Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-02559 - Valve Manholes and Piping and Equipment in Valve Manholes (SUPERSEDED BY MIL-STD-3007)
- NFGS-02561 - Joints, Reinforcement, & Mooring Eyes in (Cancelled, 1991, Superseded by NFGS-02522)
- NFGS-02581 - Utility Poles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02582 - Electrical Manhole and Handhole (SUPERSEDED BY MIL-STD-3007)
- NFGS-02588 - Concrete Poles (SUPERSEDED BY MIL-STD-3007)
- NFGS-02630 - Storm Drainage (SUPERSEDED BY MIL-STD-3007)
- NFGS-02661 - Pond and Reservoir Liners (SUPERSEDED BY MIL-STD-3007)
- NFGS-02711 - Bituminous Concrete Base Course (SUPERSEDED BY MIL-STD-3007)
- NFGS-02712 - Lean Concrete Base Course (SUPERSEDED BY MIL-STD-3007)
- NFGS-02713 - Cement Stabilized (Base) (Subbase) Course at Airfields and Roads (SUPERSEDED BY MIL-STD-3007)
- NFGS-02714 - Lime Treated Subgrade [Lime Modified Solis] (SUPERSEDED BY MIL-STD-3007)
- NFGS-02721 - [Base Course for Rigid] [and Subbase Course for Flexible] Paving (SUPERSEDED BY MIL-STD-3007)
- NFGS-02722 - Graded Crushed Aggregate Base Course for Flexible Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-02723 - Sand-Clay [Base] [Subbase] Course (SUPERSEDED BY MIL-STD-3007)
- NFGS-02741 - Bituminous Concrete Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-02742 - Hot Mix Bituminous Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-02743 - Bituminous Prime Coat (SUPERSEDED BY MIL-STD-3007)
- NFGS-02744 - Bituminous Tack Coat (SUPERSEDED BY MIL-STD-3007)
- NFGS-02751 - Reinforced Cement Concrete Pavement for Roads and Airfields (SUPERSEDED BY MIL-STD-3007)
- NFGS-02752 - Portland Cement Concrete Pavement for Roads and Site Facilities (SUPERSEDED BY MIL-STD-3007)
- NFGS-02761 - Pavement Markings (SUPERSEDED BY MIL-STD-3007)
- NFGS-02762 - Joints, Reinforcement, and Mooring Eyes in Concrete Pavements (SUPERSEDED BY MIL-STD-3007)
- NFGS-02785 - Bituminous Seal Coat (SUPERSEDED BY MIL-STD-3007)
- NFGS-02786 - Fog Seal (SUPERSEDED BY MIL-STD-3007)
- NFGS-02787 - Slurry Seal (SUPERSEDED BY MIL-STD-3007)
- NFGS-02788 - Coal Tar Seal Coat with Unvulcanized Rubber (SUPERSEDED BY MIL-STD-3007)
- NFGS-02789 - Bituminous Surface Treatment (SUPERSEDED BY MIL-STD-3007)
- NFGS-02808 - Removal and Disposal of Asbestos Materials (SUPERSEDED BY MIL-STD-3007)
- NFGS-02811 - Irrigation Sprinkler Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-02821 - Chain Link Fences and Gates (SUPERSEDED BY MIL-STD-3007)
- NFGS-02841 - Traffic Barriers (SUPERSEDED BY MIL-STD-3007)
- NFGS-02870 - Site and Street Furnishings (SUPERSEDED BY MIL-STD-3007)
- NFGS-02921 - Turf (SUPERSEDED BY MIL-STD-3007)
- NFGS-02930 - Exterior Plants (SUPERSEDED BY MIL-STD-3007)
- NFGS-02935 - Landscape Maintenance (SUPERSEDED BY MIL-STD-3007)
- NFGS-02961 - Cold-Milling of Bituminous Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-02976 - Stress-Absorbing Membrane Interplayer (SUPERSEDED BY MIL-STD-3007)
- NFGS-02981 - Rubber and Paint Removal from Airfield Pavements PAVEMENTS (SUPERSEDED BY MIL-STD-3007)
- NFGS-02982 - Resealing of Joints in Rigid Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-02983 - Partial Depth Patching of Rigid Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-03100 - Concrete Forms and Accessories (Replaced by NFGS-03300R)
- NFGS-03200 - Concrete Reinforcement (Replaced by NFGS-03300R)
- NFGS-03300 - Cast-in-Place Concrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-03311 - Marine Concrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-03371 - Shotcrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-03410 - Plant-Precast Structural Concrete (Superseded by MIL-STD-3007)
- NFGS-03412 - Plant-Precast Prestressed Structural Concrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-03450 - Plant-Precast Architectural Concrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-03520 - Lightweight Concrete Roof Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-03930 - Concrete Rehabilitation (SUPERSEDED BY MIL-STD-3007)
- NFGS-04200 - Unit Masonry (SUPERSEDED BY MIL-STD-3007)
- NFGS-04230 - Reinforced Masonry (SUPERSEDED BY MIL-STD-3007)
- NFGS-04250 - Glazed Structural Clay Tile and Prefaced Concrete Masonry Units (SUPERSEDED BY MIL-STD-3007)
- NFGS-04270 - Glass Masonry Units (SUPERSEDED BY MIL-STD-3007)
- NFGS-05120 - Structural Steel (SUPERSEDED BY MIL-STD-3007)
- NFGS-05210 - Steel Joists [and Joists Girders] (SUPERSEDED BY MIL-STD-3007)
- NFGS-05310 - Steel Decks (SUPERSEDED BY MIL-STD-3007)
- NFGS-05311 - Steel Roof Decking (SUPERSEDED BY NFGS-05310)
- NFGS-05313 - Steel Floor Decks (SUPERSEDED BY NFGS-05310)
- NFGS-05400 - Cold-Formed Metal Framing (SUPERSEDED BY MIL-STD-3007)
- NFGS-05500 - Metal Fabrications (SUPERSEDED BY MIL-STD-3007)
- NFGS-05650 - Railroad Track and Accessories (SUPERSEDED BY MIL-STD-3007)
- NFGS-05652 - Welding Crane and Railroad Rail - Thermite Method (SUPERSEDED BY MIL-STD-3007)
- NFGS-06100 - Rough Carpentry (SUPERSEDED BY MIL-STD-3007)
- NFGS-06200 - Finish Carpentry (SUPERSEDED BY MIL-STD-3007)
- NFGS-06650 - Solid Polymer Fabrication (SUPERSEDED BY MIL-STD-3007)
- NFGS-07112 - Bituminous Damproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07119 - Membrane Waterproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07121 - Built-Up Bituminous Waterproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07132 - Elastomeric Sheet Waterproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07141 - Fluid-Applied Waterproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07161 - Metallic Oxide Waterproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07170 - Bentonite Waterproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07190 - Water Repellents (SUPERSEDED BY MIL-STD-3007)
- NFGS-07212 - Mineral Fiber Blanket Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-07214 - Board and Block Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-07216 - Loose Fill Thermal Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-07218 - Spray Applied Cellulose Insulation (NO SUPERSEDING Document)
- NFGS-07220 - Roof and Deck Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-07221 - Thermal and Moisture Protection, Section 07221, Masonry Wall Insulation(SUPERSEDED BY MIL-STD-3007)
- NFGS-07222 - Tapered Roof Insulation (SUPERSEDED BY NFGS-07220C)
- NFGS-07230 - Thermal and Moisture Protection, Section 07230, Perimeter and Under-Slab Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-07232 - Thermal and Moisture Protection, Section 07232, Ceiling, Wall, and Floor Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-07240 - Exterior Insulation and Finish Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-07311 - Asphalt Shingles (SUPERSEDED BY MIL-STD-3007)
- NFGS-07320 - Roof Tiles (SUPERSEDED BY MIL-STD-3007)
- NFGS-07410 - Metal Roof and Wall Panels (SUPERSEDED BY MIL-STD-3007)
- NFGS-07511 - Built-Up Asphalt Roofing (Aggregate Surfaced) (SUPERSEDED BY MIL-STD-3007)
- NFGS-07512 - Built-Up Asphalt Roofing (Smooth Surfaced) (SUPERSEDED BY MIL-STD-3007)
- NFGS-07513 - Built-Up Asphalt Roofing (Mineral Surfaced) (SUPERSEDED BY MIL-STD-3007)
- NFGS-07520 - Prepared Roll Roofing (SUPERSEDED BY NFGS-07580)
- NFGS-07531 - Chlorosulfonated Polyethylene Roofing (CSPE) (SUPERSEDED BY MIL-STD-3007)
- NFGS-07532 - Polyisobutylene (PIB) Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07536 - Ethylene Propylene Diene Monomer (EPDM) Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07541 - Polyvinyl Chloride (PVC) Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07542 - Thermoplastic Alloy (TPA) Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07550 - Modified Bituminous Membrane Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07571 - Foamed Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07572 - Coatings for Foamed Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07580 - Roll Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07600 - Flashing and Sheet Metal (SUPERSEDED BY MIL-STD-3007)
- NFGS-07611 - Steel Standing Seam Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07612 - Aluminum Standing Seam Roofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07810 - Spray-Applied Fireproofing (SUPERSEDED BY MIL-STD-3007)
- NFGS-07840 - Firestopping (SUPERSEDED BY MIL-STD-3007)
- NFGS-07920 - Joint Sealants (SUPERSEDED BY MIL-STD-3007)
- NFGS-08110 - Steel Doors and Frames (SUPERSEDED BY MIL-STD-3007)
- NFGS-08120 - Aluminum Doors and Frames (SUPERSEDED BY MIL-STD-3007)
- NFGS-08161 - Aluminum Sliding Glass Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08162 - Sliding Fire Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08181 - Metal Storm Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08210 - Wood Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08331 - Rolling Service [and Fire] Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08342 - Steel Sliding Hangar Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08361 - Sectional Overhead Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08370 - Vertical Lift Doors (SUPERSEDED BY MIL-STD-3007)
- NFGS-08510 - Steel Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-08520 - Aluminum Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-08550 - Wood Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-08560 - Plastic Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-08562 - Aluminum Storm Windows (SUPERSEDED BY NFGS-08582)
- NFGS-08581 - Blast Resistant Tempered Glass Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-08582 - Aluminum Storm Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-08710 - Door Hardware (SUPERSEDED BY MIL-STD-3007)
- NFGS-08745 - Electrical Locking Control for Brigs (SUPERSEDED BY MIL-STD-3007)
- NFGS-08800 - Glazing (SUPERSEDED BY MIL-STD-3007)
- NFGS-08900 - Glazed Curtain Wall (SUPERSEDED BY MIL-STD-3007)
- NFGS-09100 - Metal Support Assemblies (SUPERSEDED BY MIL-STD-3007)
- NFGS-09205 - Furring and Lathing (SUPERSEDED BY MIL-STD-3007)
- NFGS-09212 - Plaster and Stucco (SUPERSEDED BY MIL-STD-3007)
- NFGS-09215 - Veneer Plaster (SUPERSEDED BY MIL-STD-3007)
- NFGS-09250 - Gypsum Board (SUPERSEDED BY MIL-STD-3007)
- NFGS-09310 - Ceramic Tile, Quarry Tile, and Paver Tile (SUPERSEDED BY MIL-STD-3007)
- NFGS-09331 - Chemical-Resistant Quarry Tile (SUPERSEDED BY MIL-STD-3007)
- NFGS-09410 - Portland Cement Terrazzo (SUPERSEDED BY MIL-STD-3007)
- NFGS-09510 - Acoustical Ceilings (SUPERSEDED BY MIL-STD-3007)
- NFGS-09641 - Wood Athletic Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-09643 - Portable (Demountable) Wood Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-09645 - Wood Parquet Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-09651 - Resilient Tile Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-09655 - Resilient Sheet Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-09656 - Resilient Sheet Flooring (Institutional) (SUPERSEDED BY MIL-STD-3007)
- NFGS-09670 - Fluid-Applied Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-09680 - Carpet (SUPERSEDED BY MIL-STD-3007)
- NFGS-09685 - Carpet Tile (SUPERSEDED BY MIL-STD-3007)
- NFGS-09721 - Vinyl Coated Fabric Wall Covering (SUPERSEDED BY MIL-STD-3007)
- NFGS-09900 - Paints and Coatings (SUPERSEDED BY MIL-STD-3007)
- NFGS-09910 - Maintenance, Repair, and Coating of Tall Antenna Towers (Navy and AF) (SUPERSEDED BY MIL-STD-3007)
- NFGS-09963 - High-Build Glaze Coatings (SUPERSEDED BY MIL-STD-3007)
- NFGS-09965 - Metallic Type Conductive/Spark Resistant Concrete Floor Finish (SUPERSEDED BY MIL-STD-3007)
- NFGS-09967 - Coating of Steel Waterfront Structures (SUPERSEDED BY MIL-STD-3007)
- NFGS-09970 - Interior Coatings for Welded Steel Tanks (for Petroleum Fuels) (SUPERSEDED BY MIL-STD-3007)
- NFGS-09971 - Exterior Coating System for Welded Steel Petroleum Storage Tanks
- NFGS-09973 - Interior Coating System for Welded Steel Petroleum Storage Tanks (SUPERSEDED BY MIL-STD-3007)
- NFGS-09974 - Protection of Buried Steel Piping and Steel Bulkhead Tie Rods (SUPERSEDED BY MIL-STD-3007)
- NFGS-09980 - Interior Lining for Concrete Storage Tanks (for Petroleum Fuels) (SUPERSEDED BY MIL-STD-3007)
- NFGS-09981 - Linseed Oil Protection of Concrete Surfaces (SUPERSEDED BY MIL-STD-3007)
- NFGS-10153 - Toilet Partitions (SUPERSEDED BY MIL-STD-3007)
- NFGS-10191 - Cubicle Track and Hardware (SUPERSEDED BY MIL-STD-3007)
- NFGS-10201 - Metal [Wall] [and] [Door] Louvers (SUPERSEDED BY MIL-STD-3007)
- NFGS-10260 - Wall and Corner Guards (SUPERSEDED BY MIL-STD-3007)
- NFGS-10270 - Access Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-10400 - Identification Devices (SUPERSEDED BY MIL-STD-3007)
- NFGS-10505 - Steel Clothing Lockers (SUPERSEDED BY MIL-STD-3007)
- NFGS-10605 - Wire Mesh Partitions (SUPERSEDED BY MIL-STD-3007)
- NFGS-10652 - Operable Panel Partitions (SUPERSEDED BY MIL-STD-3007)
- NFGS-10655 - Accordion Folding Partitions (SUPERSEDED BY MIL-STD-3007)
- NFGS-10675 - Steel Shelving (SUPERSEDED BY MIL-STD-3007)
- NFGS-10716 - Storm Shutters (SUPERSEDED BY MIL-STD-3007)
- NFGS-10800 - Toilet and Bath Accessories (SUPERSEDED BY MIL-STD-3007)
- NFGS-11020 - Security Vault Door [and Day Gate] (SUPERSEDED BY MIL-STD-3007)
- NFGS-11161 - Dock Levelers (SUPERSEDED BY MIL-STD-3007)
- NFGS-11171 - Packaged Incinerators (SUPERSEDED BY MIL-STD-3007)
- NFGS-11191 - Detention and Security Windows (SUPERSEDED BY MIL-STD-3007)
- NFGS-11192 - Detention and Security Glazing (SUPERSEDED BY MIL-STD-3007)
- NFGS-11193 - Detention on Hollow Metal Frames, Doors, and Door Frames ON (SUPERSEDED BY MIL-STD-3007)
- NFGS-11194 - Detention Hardware (SUPERSEDED BY MIL-STD-3007)
- NFGS-11195 - Detention Furniture and Accessories (SUPERSEDED BY MIL-STD-3007)
- NFGS-11196 - Locking Control Systems [for Brig Facilities] (SUPERSEDED BY NFGS-08745)
- NFGS-11198 - Duress Signal System [for Brig Facilities] (SUPERSEDED BY NFGS-13798)
- NFGS-11199 - Watchtour System [for Brig Facilities] (SUPERSEDED BY NFGS-13799)
- NFGS-11311 - Parallel Plate [or Vertical Tube] Oil-Water Separator (SUPERSEDED BY MIL-STD-3007)
- NFGS-11312 - Package(Gringer Pump) (Lift) Station (SUPERSEDED BY MIL-STD-3007)
- NFGS-11320 - Grit Collecting Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11332 - Mechanically Cleaned Bar Racks (CANCELLED, NO SUPERSEDING DOCUMENT)
- NFGS-11336 - Rectangular Chain-and-Flight Clarifier (CANCELLED, NO SUPERSEDING DOCUMENT)
- NFGS-11337 - Rectangular Reciprocating Traveling-Bridge Clarifier (CANCELLED, NO SUPERSEDING DOCUMENT)
- NFGS-11338 - Circular Clarifier SUPERSEDED BY (MIL-STD-3007)
- NFGS-11365 - Trickling Filter Equipment (CANCELLED, NO SUPERSEDING DOCUMENT)
- NFGS-11375 - Aeration Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11400 - Food Service Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11401 - Electric Kitchen Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11475 - Radiographic Darkroom Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11501 - Industrial Ventilation and Exhaust (SUPERSEDED BY MIL-STD-3007)
- NFGS-11502 - Testing Industrial Ventilation Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-11601 - Laboratory Equipment and Fumehoods (SUPERSEDED BY MIL-STD-3007)
- NFGS-11613 - Stills and Associated Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11700 - General Requirements for Medical and Dental Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11702 - Medical Equipment, Miscellaneous (SUPERSEDED BY MIL-STD-3007)
- NFGS-11704 - [Casework] [and] [Material Handling Units] in Medical Facilities (SUPERSEDED BY MIL-STD-3007)
- NFGS-11706 - Hydrotherapy Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11707 - Hospital and Laboratory Washing Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11708 - Installation of Government-Furnished Medical Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11712 - Sterilizers and Associated Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-11744 - Dental Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-12301 - Manufactured Vanities (SUPERSEDED BY MIL-STD-3007)
- NFGS-12302 - Wardrobe Storage Cabinets (Three Drawer) (SUPERSEDED BY MIL-STD-3007)
- NFGS-12303 - Wardrobes (SUPERSEDED BY MIL-STD-3007)
- NFGS-12351 - Medical and Dental Casework (SUPERSEDED BY MIL-STD-3007)
- NFGS-12352 - Residential Casework (SUPERSEDED BY MIL-STD-3007)
- NFGS-12490 - Blinds, Venetians (and Audio Visual) (SUPERSEDED BY MIL-STD-3007)
- NFGS-12491 - Curtains and Drapes (SUPERSEDED BY MIL-STD-3007)
- NFGS-12601 - Theater Seating (SUPERSEDED BY MIL-STD-3007)
- NFGS-13034 - Prefabricated Audiometric Rooms (SUPERSEDED BY MIL-STD-3007)
- NFGS-13038 - Cold-Storage Rooms (Prefabricated Panel Type) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13092 - X-Ray Shielding (SUPERSEDED BY MIL-STD-3007)
- NFGS-13093 - Radio Frequency Shielded Enclosures, Demountable Type (SUPERSEDED BY MIL-STD-3007)
- NFGS-13094 - Radio Frequency Shielded Enclosures, Welded Type (SUPERSEDED BY MIL-STD-3007)
- NFGS-13095 - Hemp Shielded Door (SUPERSEDED BY MIL-STD-3007)
- NFGS-13100 - Lightning Protection System (SUPERSEDED BY MIL-STD-3007)
- NFGS-13110 - Cathodic Protection by Galvanic Anodes (SUPERSEDED BY MIL-STD-3007)
- NFGS-13111 - Cathodic Protection by Impressed Current (SUPERSEDED BY MIL-STD-3007)
- NFGS-13112 - Cathodic Protection System (Steel Water Tanks) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13121 - Preengineered Metal Buildings (SUPERSEDED BY MIL-STD-3007)
- NFGS-13205 - Steel Tanks with Fixed Roofs (SUPERSEDED BY MIL-STD-3007)
- NFGS-13208 - Wire-Wound Circular Prestressed-Concrete Water (SUPERSEDED BY MIL-STD-3007)
- NFGS-13209 - Water Storage Tanks (SUPERSEDED BY MIL-STD-3007)
- NFGS-13216 - Underground Petroleum Tanks (SUPERSEDED BY MIL-STD-3007)
- NFGS-13217 - Fiberglass-Plastic Lining for Steel Tanks Bottoms (for Petroleum) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13219 - Cleaning Petroleum Storage Tanks (SUPERSEDED BY MIL-STD-3007)
- NFGS-13281 - Engineering Control of Asbestos Containing Materials (SUPERSEDED BY MIL-STD-3007)
- NFGS-13282 - Removal and Disposal of Material Containing Lead (SUPERSEDED BY MIL-STD-3007)
- NFGS-13283 - Removal and Disposal of Lead-Containing Paint (SUPERSEDED BY MIL-STD-3007)
- NFGS-13284 - Removal and Disposal of Polychlorinated Biphenyls (PCBS) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13285 - Removal and Disposal of PCB Contaminated Soils (SUPERSEDED BY MIL-STD-3007)
- NFGS-13286 - Removal and Disposal of PCB Containing Lighting Ballasts (SUPERSEDED BY MIL-STD-3007)
- NFGS-13287 - Radon Mitigation (SUPERSEDED BY MIL-STD-3007)
- NFGS-13401 - Flow Measuring Equipment [Potable Water] [Sewage Treatment Pant] (SUPERSEDED BY MIL-STD-3007)
- NFGS-13610 - Solar Liquid Flat Plate Collectors (SUPERSEDED BY MIL-STD-2007)
- NFGS-13702 - Basic Intrusion Detection Systems (IDS) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13703 - Commercial Intrusion Detection Systems (IDS) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13798 - Duress Signal System [for Brig Facilities] (SUPERSEDED BY MIL-STD-3007)
- NFGS-13799 - Watchtour System [for Brig Facilities] (SUPERSEDED BY MIL-STD-3007)
- NFGS-13851 - Exterior Fire Alarm System, Closed Circuit Telegraphic Type (SUPERSEDED BY MIL-STD-3007)
- NFGS-13852 - Interior Fire Detection and Alarm System (SUPERSEDED BY MIL-STD-3007)
- NFGS-13853 - Fire Alarm System, Radio Type (SUPERSEDED BY MIL-STD-3007)
- NFGS-13920 - Fire Pumps (SUPERSEDED BY MIL-STD-3007)
- NFGS-13930 - Wet-Pipe Fire Suppression Sprinklers (SUPERSEDED BY MIL-STD-3007)
- NFGS-13931 - Fire Extinguishing Sprinkler Systems (Residential) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13935 - Dry-Pipe Fire Suppression Sprinkler (SUPERSEDED BY MIL-STD-3007)
- NFGS-13945 - [Deluge] [Preaction] Fire Suppression Sprinkler Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-13947 - Rev a, +Cancelled, 1990, No S/S Document
- NFGS-13948 - Rev B +Cancelled, 1990, No S/S Document
- NFGS-13950 - Energy Monitoring and Control System (EMCS) for Micro Systems (CANCELLED, NO SUPERSEDING DOCUMENT)
- NFGS-13956 - Foam Fire Extinguishing for Aircraft Hangars (SUPERSEDED BY MIL-STD-3007)
- NFGS-13957 - Foam Fire Extinguishing for Fuel Tank Protection (SUPERSEDED BY MIL-STD-3007)
- NFGS-13958 - Foam Fire Extinguishing for Haz/Flam Material Facility (SUPERSEDED BY MIL-STD-3007)
- NFGS-13961 - Carbon Dioxide Fire Extinguishing (High Pressure) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13962 - Carbon Dioxide Fire Extinguishing (Low Pressure) (SUPERSEDED BY MIL-STD-3007)
- NFGS-13966 - Halon 1301 Fire Extinguishing (SUPERSEDED BY MIL-STD-3007)
- NFGS-13971 - Dry Chemical Fire Extinguishing for Kitchen Cabinet (SUPERSEDED BY MIL-STD-3007)
- NFGS-14210 - Electric Traction Elevators (SUPERSEDED BY MIL-STD-3007)
- NFGS-14240 - Hydraulic Elevators (SUPERSEDED BY MIL-STD-3007)
- NFGS-14534 - Monorails with Manual Hoist (SUPERSEDED BY MIL-STD-3007)
- NFGS-14535 - Monorails with Air Motored Powered Hoist (SUPERSEDED BY MIL-STD-3007)
- NFGS-14606 - Portal Crane Track Installation (SUPERSEDED BY MIL-STD-3007)
- NFGS-14622 - Monorails with Electric Powered Hoists (SUPERSEDED BY MIL-STD-3007)
- NFGS-14636 - Cranes, Overhead Electric, Top Running (Under 20,000 Pounds) (SUPERSEDED BY MIL-STD-3007)
- NFGS-14637 - Cranes, Overhead Electric, Underrunning (Under 20,000 Pounds) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15050 - Basic Mechanical Materials and Methods (SUPERSEDED BY MIL-STD-3007)
- NFGS-15070 - Mechanical Sound, Vibration, and Seismic Control (SUPERSEDED BY MIL-STD-3007)
- NFGS-15080 - Mechanical Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-15081 - Exterior Piping Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-15181 - Chilled, Condenser, or Dual Service Water Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15182 - Refrigerant Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15183 - Steam System and Terminal Units (SUPERSEDED BY MIL-STD-3007)
- NFGS-15184 - [High] [Medium] Temperature Water System within Buildings (SUPERSEDED BY MIL-STD-3007)
- NFGS-15185 - Low Temperature Water [LTW] Heating System (SUPERSEDED BY MIL-STD-3007)
- NFGS-15191 - Fiberglass Reinforced Plastic (FRP) Piping (for Petroleum) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15192 - Fuel Oil Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15193 - Gasoline/Diesel Dispensing Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-15194 - Aviation Fuel Distribution and Dispensing (SUPERSEDED BY MIL-STD-3007)
- NFGS-15195 - Natural Gas and Liquid Petroleum Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15211 - Low Pressure Compressed Air Piping (Non-Breathing Air Type) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15212 - High and Medium Pressure Compressed Air Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15213 - Large Centrifugal Air Compressors (Over 200 HP) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15214 - Large Nonlubricated Reciprocating Air Compressors (over 300 HP) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15215 - Nonlubricated Rotary Screw Air Compressors (100 HP and Larger) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15216 - Welding Pressure Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15217 - Medical Gas and Vacuum Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-15365 - Halon 1301 Fire Extinguishing System (SUPERSEDED BY MIL-STD-3007)
- NFGS-15400 - Plumbing Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-15411 - Hospital Plumbing Fixtrues (Superseded by MIL-STD-3007)
- NFGS-15486 - Aviation Fuel Distribution and Dispensing (SUPERSEDED BY NFGS-15194)
- NFGS-15501 - Steam Heating Plant Watertube (Shop Assembled) Coal/Oil or Coal (SUPERSEDED BY MIL-STD-3007)
- NFGS-15502 - Steam Heating Plant Watertube(Field Erected) Coal/Oil or Coal (SUPERSEDED BY MIL-STD-3007)
- NFGS-15511 - Water-Tube Boilers, Oil/Gas or Oil (SUPERSEDED BY MIL-STD-3007)
- NFGS-15514 - Low Pressure Water Heating Boilers (Under 800,000 BTU/HR Output) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15515 - Low Pressure Water Heating Boilers (Over 800,000 BTU/HR Output) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15516 - Steam Boilers and Equipment (500,000 - 18,000, 000 BTU/HR) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15517 - Steam Boilers and Equipment (18,000,000 - 60,000,000 BTU/HR) (SUPERSEDED BY MIL-STD-3007)
- NFGS-15532 - Warm Air Heating Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-15601 - Central Refrigeration Equipment for Air Conditioning (SUPERSEDED BY MIL-STD-3007)
- NFGS-15602 - Refrigeration Equipment for Cold Storage (SUPERSEDED BY MIL-STD-3007)
- NFGS-15651 - Refrigerant & Chilled, Condenser, or Dual Service (Cancelled, 1990, Use NFGS-15512 & NFGS-)
- NFGS-15711 - Hot Water Heating System (Refer to NFGS-15511)
- NFGS-15720 - Air Handling Units (SUPERSEDED BY MIL-STD-3007)
- NFGS-15721 - Evaporative Cooling System (SUPERSEDED BY MIL-STD-3007)
- NFGS-15730 - Unitary Air Conditioning Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-15741 - Water Source Heat Pump Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-15751 - Desiccant Dehumidification Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-15760 - Terminal Heating and Cooling Units (SUPERSEDED BY MIL-STD-3007)
- NFGS-15768 - Electric Space Heating Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-15801 - Industrial Ventilation and Exhaust (SUPERSEDED BY MIL-STD-3007)
- NFGS-15810 - Ductwork and Ductwork Accessories (SUPERSEDED BY MIL-STD-3007)
- NFGS-15813 - Waiving Air Heating Systems (SUPERSEDED BY NFGS-15621)
- NFGS-15861 - Mechanical Cyclone Dust Collector or Flue Gas Particulates (SUPERSEDED BY MIL-STD-3007)
- NFGS-15862 - Electrostatic Dust Collector of Flue Gas Particulates (SUPERSEDED BY MIL-STD-3007)
- NFGS-15863 - Fabric Filter Dust Collector of Flyash Particles in Flue Gas (SUPERSEDED BY MIL-STD-3007)
- NFGS-15864 - Dust and Gas Collector, Dry Scrubber and Fabric Filter Type (SUPERSEDED BY MIL-STD-3007)
- NFGS-15871 - Industrial Ventilation and Exhaust Systems (Ducts and Fans) (SUPERSEDED BY NFGS-11501)
- NFGS-15901 - Space Temperature Control Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-15910 - Direct Digital Control Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-15950 - HVAC Testing/Adjusting/Balancing (SUPERSEDED BY MIL-STD-3007)
- NFGS-15951 - Testing Industrial Ventilation Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-16050 - Basic Electrical Materials and Methods (SUPERSEDED BY MIL-STD-3007)
- NFGS-16060 - Grounding and Bonding (NO SUPERSEDING Document)
- NFGS-16081 - Apparatus Inspection and Testing (SUPERSEDED BY MIL-STD-3007)
- NFGS-16130 - Underfloor Raceway System (SUPERSEDED BY MIL-STD-3007)
- NFGS-16145 - 480 V Pier Power Outlet Assemblies (SUPERSEDED BY MIL-STD-3007)
- NFGS-16230 - Diesel-Electric Generators (Design 1) 500 to 2,500 KW - Prime Duty (SUPERSEDED BY MIL-STD-3007)
- NFGS-16231 - Diesel-Electric Generators (Design 2) 2,501 KW or Larger - Prime Duty (SUPERSEDED BY MIL-STD-3007)
- NFGS-16232 - Standby Diesel-Electric Generators (Design 3) 301 to 1,000 KW (SUPERSEDED BY MIL-STD-3007)
- NFGS-16233 - Standby Diesel-Electric Generators (Design 4) 1,001 KW or Larger (SUPERSEDED BY MIL-STD-3007)
- NFGS-16234 - Diesel Engine-Generator Sets - Prime and Standby - 10 to 500 KW (SUPERSEDED BY MIL-STD-3007)
- NFGS-16237 - Single Operation Generator Sets (SUPERSEDED BY MIL-STD-3007)
- NFGS-16261 - Variable Frequency Drive Systems Under 600 Volts (SUPERSEDED BY MIL-STD-3007)
- NFGS-16268 - 400-Hertz (Hz) Solid State Frequency Converter (Superseded by MIL-STD-3007)
- NFGS-16272 - Three-Phase Pad-Mounted Transformers (SUPERSEDED BY MIL-STD-3007)
- NFGS-16273 - Single-Phase Pad-Mounted Transformers (SUPERSEDED BY MIL-STD-3007)
- NFGS-16280 - Radio Frequency Interference Power LIne Filters (SUPERSEDED BY MIL-STD-3007)
- NFGS-16301 - Overhead Transmission and Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-16302 - Undergroung Transmission and Distribution (Superseded by MIL-STD-3007)
- NFGS-16321 - Interior Transformers (Cancelled, 1990, Use NFGS-16312)
- NFGS-16335 - Transformers, Substations & Switchgear, Exterior (Cancelled,1990, Use NFGS-16312)
- NFGS-16341 - Pad-Mounted SF6 Insulated Interrupter Switches (SUPERSEDED BY MIL-STD-3007)
- NFGS-16360 - Secondary Unit Substations Unit (SUPERSEDED BY MIL-STD-3007)
- NFGS-16361 - Primary Unit Substation (SUPERSEDED BY MIL-STD-3007)
- NFGS-16402 - Interior Distribution System (SUPERSEDED BY MIL-STD-3007)
- NFGS-16407 - Marina Electrical Work (SUPERSEDED BY MIL-STD-3007)
- NFGS-16410 - Automatic Transfer (and Bypass/Isolation) Switches (SUPERSEDED BY MIL-STD-3007)
- NFGS-16425 - Interior Switchgear and Switchboards, Low-Voltage (SUPERSEDED BY NFGS-16312)
- NFGS-16462 - Pad-Mounted Transformers (SUPERSEDED BY NFGS-16272)
- NFGS-16465 - Interior Substations (SUPERSEDED BY NFGS-16312)
- NFGS-16510 - Interior Lighting (SUPERSEDED BY MIL-STD-3007)
- NFGS-16520 - Exterior Lighting (SUPERSEDED BY MIL-STD-3007)
- NFGS-16522 - Airfield Lighting (SUPERSEDED BY MIL-STD-3007)
- NFGS-16553 - Surgical Lighting Fixtures (SUPERSEDED BY MIL-STD-3007)
- NFGS-16710 - Structured Telecommunications Cabling and Pathway System (SUPERSEDED BY MIL-STD-3007)
- NFGS-16712 - Fiber Optics Data Transmission for Exterior System (SUPERSEDED BY MIL-STD-3007)
- NFGS-16720 - Administrative Telephone Equipment, Inside Plant (SUPERSEDED BY MIL-STD-3007)
- NFGS-16721 - Telephone Distribution System, Outside Plant (SUPERSEDED BY MIL-STD-3007)
- NFGS-16722 - Pier Telephone Distribution Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-16725 - Nurse Call System (SUPERSEDED BY MIL-STD-3007)
- NFGS-16782 - [Master] [Community] Antenna Television System (SUPERSEDED BY MIL-STD-3007)
- NFGS-16822 - Intercommunication System (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-01370 - Progress Schedules (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-02237 - Econocrete Base Course (SUPERSEDED BY NFGS-02237)
- NFGS-M-02261 - Exterior Water Distribution System (Minor Construction) (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-08800 - Glazing (SUPERSEDED BY NFGS-08800)
- NFGS-M-09872 - Interior Coatings for Welded Steel Tanks (for Petroleum Fuels) (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-09881 - Linseed Oil Protection of Concrete Surfaces (SUPERSEDED BY NFGS-09881)
- NFGS-M-1119 - Watchtour System (for Brig Facilities)
- NFGS-M-15322 - Refrigerant Piping (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-15358 - AFFF Fire Extinguishing System for HAZ/FLAM Material Facility (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-15530 - Refrigerant Piping (SUPERSEDED BY NFGS-15530)
- NFGS-M-1555 - Low Pressure Water Heating Boilers (Under 800,000 BTU/HR Output) (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-15554 - Steam Heating Plant Watertube (Field Erected) Coal/Oil or Coal (SUPERSEDED BY MIL-STD-3007)
- NFGS-M-1627 - Commercial Intrusion Detection Systems (IDS) (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-01330 - Submittal Procedures (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-01420 - References (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-01450 - Quality Control (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-01781 - Operation and Maintenance Data (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02220 - Site Demolition (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02231 - Clearing and Grubbing (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02315 - Excavation and Fill (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02510 - Water Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02530 - Sanitary Sewerage (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02631 - Storm Drainage (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02741 - Bituminous Concrete Pavement (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-02821 - Chain Link Fences and Gates (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-03300 - Cast-in Place Concrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-03410 - Plant-Precast Structural Concrete (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-04200 - Unit Masonry (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-05210 - Steel Joists (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-05310 - Steel Decks (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-05400 - Cold-Formed Metal Framing (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-05500 - Metal Fabrications (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-06100 - Rough Carpentry (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-06200 - Finish Carpentry (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-07220 - Roof and Deck Insulation (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-07511 - Built-Up Asphalt Roofing (Aggregate Surfaced) (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-07600 - Flashing and Sheet Metal (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-07920 - Joint Sealants (Superseded by MIL-STD-3007)
- NFGS-SF-08800 - Glazing (Superseded by MIL-STD-3007)
- NFGS-SF-09650 - Resilient Flooring (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-13102 - Lightning Protection System (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-13855 - Smoke Alarm [and Smoke Detection] Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15400 - Plumbing Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15600 - Direct Expansion Refrigeration System (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15710 - Heat Transfer Equipment (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15720 - Air Handling Units (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15810 - Ductwork and Ductwork Accessories (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15915 - Space Temperature Control Systems (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-15950 - Testing/Adjusting/Balancing for Small HVAC System (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16110 - Interior Electrical Work (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16235 - Diesel Engine-Generator Sets - Standby - 10 to 500 KW (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16400 - Service and Distribution (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16401 - Overhead Electrical Work - Low Voltage (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16403 - Underground Electrical Work - Low Voltage (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16512 - Interior Lighting (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16524 - Exterior Lighting (SUPERSEDED BY MIL-STD-3007)
- NFGS-SF-16723 - Interior Telephone System (SUPERSEDED BY MIL-STD-3007)
- NSF-STD-61 - See: NSF-61
- PFI-ES-1 - Internal Machining and Solid Machined Backing Rings For Circumferential Butt Welds
- PFI-ES-11 - Permanent Marking on Piping Materials
- PFI-ES-21 - Internal Machining and Fit-Up of GTAW Root Pass Circumferential Butt Welds
- PFI-ES-22 - Recommended Practice for Color Coding of Piping Materials
- PFI-ES-3 - Fabricating Tolerances
- PFI-ES-31 - Standard for Protection of Ends of Fabricated Piping Assemblies
- PFI-ES-35 - Nonsymmetrical Bevels and Joint Configurations for Butt Welds
- PFI-ES-7 - Minimum Length and Spacing for Welded Nozzles
- SAE-J1019 - Tests & Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose
- SAE-J1995 - Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power and Torque Rating
- SMACNA-SRM - Manual Seismic Restraint: Guidelines for Mechanical Systems
- TIA-569 - Telecommunications Pathways and Space
- UL-1479 - Standard for Fire Tests of Penetration Firestops
- UL-779 - Standard for Electrically Conductive Floorings