FSC 8040: Adhesives
The following documents are a part of this series:
ASTM:
US GOVERNMENT DOCUMENTS:
- A-A-1270 - Adhesive, Polyvinyl Acetate Emulsion, General Purpose
- A-A-1936 - Adhesive, Contact, Neoprene Rubber
- A-A-3001 - Adhesive, Polyvinyl Acetate Emulsion, Wood & Plastic
- A-A-3006 - Adhesive, Paper Label
- A-A-3052 - Adhesive, Urea Resin Type (Liquid & Powder)
- A-A-3053 - Adhesive, Epoxy Resin Base, General Purpose
- A-A-3097 - Adhesives, Cyanoacrylate, Rapid Room Temperature-Curing, Solventless
- A-A-3098 - Adhesive, Epoxy, Sand Filled, for Repairing, Sealing, & Grouting Concrete
- A-A-3137 - Adhesive, Asphalt, Cut-Back Type
- A-A-3138 - Adhesive, Asphalt, Water Emulision Type (for Asphalt & Vinylcomposition Tiles)
- A-A-3139 - Adhesive, Resilient Flooring, (Water-Based)
- A-A-342 - Adhesive, Semi-Slid, Stick Form, with Dispenser
- A-A-50272 - Adhesives, Epoxy
- A-A-50535 - Adhesive, Starch
- A-A-529 - Adhesive & Sealing Compound, Cellulose Nitrate Base (Solvent Type)
- A-A-56015 - Adhesive System, Epoxy, for Dissimilar Metal Bonding
- A-A-56031 - Adhesive, Epoxy, Modified, Flexible, Two Component
- A-A-59109 - Adhesive, Epoxy Resin Base
- A-A-59116 - Primer, Silicone Rubber Sealant
- A-A-59254 - Adhesive, Animal Glue, Dry Form
- A-A-59692 - Adhesive, Water-Resistant (for Closure of Fiberboard Boxes)
- A-A-59786 - Adhesive, (Structural Adhesive)
- A-A-863 - Adhesive, Rubber, for Paper Bonding
- AMS-3107 - Primer, Adhesive, Corrosion-Inhibiting, for High Durability Structural Adhesive Bonding
- AMS-3107/1 - Primer, Adhesive, Corrosion-Inhibiting, High Durability Epoxy, -55 to +95 Deg C (-67 to +203 Deg F)
- AMS-3107/2 - Primer, Adhesive, Corrosion-Inhibiting, High Durability Epoxy, -55 to +120 Deg C (-67 to +248 Deg F)
- AMS-3107/3 - Primer, Adhesive, Corrosion-Inhibiting, High Durability Epoxy, -55 to +175 Deg C (-67 to +347 Deg F)
- AMS-3107/4 - Primer, Adhesive, Corrosion-Inhibiting, High Durability Epoxy, -55 to +215 Deg C (-65 to +419 Deg F)
- AMS-3375 - Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
- AMS-A-25463 - Adhesive, Film Form, Metallic Structural Sandwich Construction
- C-G-463 - Glue, Liquid
- C-G-496 - Glue, Resin-Type (Liquid and Powder) (Cancelled, Superseded By MMM-A-188)
- CSA-Z769 - Phase II Environmental Site Assessment
- DOD-A-82720 - Adhesive, Modified-Epoxy, Flexible, Two Part (Metric)
- FED-STD-175 - Adhesives: Methods of Testing+Canceled, No S/S Document+
- JAN-A-136 - Adhesive, PALLETIZED-Unit-Load
- JAN-G-338 - Glue, Animal
- MIL-A-101 - Adhesive, Water-Resistant, for Sealing Fiberboard Boxes (Superseded by MMM-A-250)
- MIL-A-11238 - Adhesive, Cellulose Nitrate (for Ordnance Use) (Use MIL-A-82484)
- MIL-A-1154 - Vulcanized Synthetic Rubber to Steel (use MMM-A-121)
- MIL-A-13213 - Adhesive and Sealer, Polyester Resin
- MIL-A-13374 - Adhesive, Dextrin, for use in Ammunition Containers
- MIL-A-13554 - Adhesive For Cellulose Nitrate Film On Metals (Cancelled, No Superseding Document)
- MIL-A-13883 - Adhesive, Synthetic-Rubber (Hot Or Cold Bonding) (Use MMM-A-189)
- MIL-A-140 - Adhesive, Water-Resistant, Waterproof Barrier-Material (Superseded by MMM-A-260)
- MIL-A-14042 - Adhesive, Epoxy (Superseded by MIL-A-48611)
- MIL-A-14064 - Adhesive: Grinding Disk (No Superseding Document)
- MIL-A-14443 - Adhesives, Glass-To-Metal (for Bonding of Lenses) (Superseded by MMM-A-00131)
- MIL-A-17682 - Adhesive, Starch (Superseded by A-A-50535)
- MIL-A-18065 - Adhesive, High Initial Bond (Superseded by MIL-A-24179)
- MIL-A-20299 - Adhesive, Gutta Percha and Pine Tar PitchOC.+
- MIL-A-21016 - Adhesive, Resilient Deck Covering
- MIL-A-21366 - Adhesive, for Bonding Plastic Table Top Material to Aluminum (No Superseding Document)
- MIL-A-22010 - Adhesive, Solvent Type, Polyvinylchloride (Superseded by ASTM-D2564)
- MIL-A-22397 - Adhesive, Phenol and Resorcinol Resin Base (for Marine Service Use)
- MIL-A-22434 - Adhesive, Polyester, Thixotropic (No Superseding Document)
- MIL-A-22611 - Adhesive, for Polyvinylchloride Coated Cloth
- MIL-A-22895 - Adhesive, Metal Identification Plate (No Superseding Document)
- MIL-A-24084 - Adhesive, Plastic Sheet Vibration Damping (Use MIL-A-24456)
- MIL-A-24179 - Adhesive, Flexible Unicellular-Plastic Thermal Insulation
- MIL-A-24456 - Adhesive for Plastic Vibration-Damping Tile
- MIL-A-25055 - Adhesive, Acrylic Monomer and Polymer Base, for Acrylic Plastics (Superseded by MIL-A-8576)
- MIL-A-25457 - Adhesive, Air-Drying, Silicone Rubber (No Superseding Document)
- MIL-A-25463 - Adhesive, Film Form, Metallic Structural Sandwich Construction (Superseded by SAE-AMS-A-25463)
- MIL-A-3167 - Adhesives (for Plastic Inhibitors)
- MIL-A-3316 - Adhesives, Fire-Resistant, Thermal Insulation
- MIL-A-3562 - Adhesive, Sealing (for Filters) (No Superseding Document)
- MIL-A-388 - Adhesive and Sealing Compounds Cellulose Nitrate Base (Superseded by MMM-A-105 and MIL-A-82484)
- MIL-A-3920 - Adhesive, Optical, Thermosetting
- MIL-A-3932 - Adhesive, Stencil (Supersedes 67-2)
- MIL-A-3941 - Adhesive, Paper Label, Water-Resistant (Use MMM-A-178)
- MIL-A-397 - Adhesive, Room-Temperature and Intermediate-Temperature Setting Resin (Phenol, Resorcinol, and Melamine Base) (Use MIL-A-22397 or MIL-A-46051)
- MIL-A-43316 - Adhesive, Patching for Chloroprene Coated or Chlorosulphonated Polyethylene Coated Fabrics (No Superseding Document)
- MIL-A-43346 - Adhesive (for Field Repair of Tents, Vinyl Coated Fabric) (No Superseding Document)
- MIL-A-43365 - Adhesive (for Repair of Radome, Air Supported)
- MIL-A-43396 - Adhesive, for Pads Paper-Honeycomb Energy Dissipating (Power Form)
- MIL-A-43529 - Adhesive, for Palletized Unit Loads (No Superseding Document)
- MIL-A-45059 - Adhesive for Bonding Chipboard To Terneplate, Tinplate, and Zincplate (No Superseding Document)
- MIL-A-46028 - Adhesive, Flashout, Cold Setting
- MIL-A-46050 - Adhesives, Cyanoacrylate, Rapid Room Temperature Curing, Solventless (Superseded by A-A-3097)
- MIL-A-46051 - Adhesive, Room-Temperature and Intermediate-Temperature Setting Resin (Phenol, Resorcinal and Melamine Base) (Use MMM-A-181)
- MIL-A-46091 - Adhesive, Brake Lining to Metal (No Superseding Document)
- MIL-A-46106 - Adhesive-Sealants, Silicone, RTV, One-Component
- MIL-A-46146 - Adhesives-Sealants, Silicone, Rtv, Noncorrosive (for Use With Sensitive Metals and Equipment)
- MIL-A-46864 - Adhesive, Epoxy, Modified, Flexible, Two Component (Superseded by A-A-56031)
- MIL-A-46869 - Adhesive, Silicone Resin Base, Room Temperature Curing (No Superseding Document)
- MIL-A-47040 - Adhesive-Sealant, Silicone, Rtv, High Temperature (Superseded by MIL-A-46146)
- MIL-A-47073 - Adhesive, Plastic Resin
- MIL-A-47074 - Adhesive System, Epoxy, for Dissimilar Metal Bonding (Superseded by A-A-56015)
- MIL-A-47089 - Adhesive, Metal Filled, Conductive, Electrical and Thermal (Superseded by MMM-A-1931)
- MIL-A-47126 - Adhesive (Viscous), Epoxy Resin, Metal To Metal Bonding and Sealing (No Superseding Document)
- MIL-A-47172 - Adhesive, Modified Epoxy (No Superseding Document)
- MIL-A-47280 - Adhesives, Epoxy (Superseded by A-A-50272)
- MIL-A-47281 - Adhesive Primer, Heat Resistant (No Superseding Document)
- MIL-A-47282 - Adhesive, Paste, Heat Resistant (No Superseding Document)
- MIL-A-47283 - Adhesive, Elevated Temperature Resistant for Bonding Reinforced Plastics and Metals (No Superseding Document)
- MIL-A-47284 - Adhesive, Epoxy Resin Base (Superseded by A-A-59109)
- MIL-A-47295 - Adhesive Composition, HA-Polymer (No Superseding Document)
- MIL-A-47310 - Adhesive System, Adhesive and Primer, for Bonding Ethylene-Propylene Rubber To Metal (Superseded by MMM-A-121)
- MIL-A-47315 - Adhesive, Polyurethane (No Superseding Document)
- MIL-A-47317 - Adhesive, Air-Drying, Silicone Rubber (No Superseding Document)
- MIL-A-47318 - Adhesive, Copolymer Polyurethane (No Superseding Document)
- MIL-A-4833 - Adhesive, Cellulose Nitrate Base (Superseded by MIL-A-388)
- MIL-A-48611 - Adhesive System, Epoxy-Elastomeric, for Glass to Metal
- MIL-A-5090 - Adhesive, Heat Resistant, Airframe Structural Metal To Metal
- MIL-A-5092 - Adhesive, Rubber Base, General Purpose (Use MMM-A-1617)
- MIL-A-52194 - Adhesive, Epoxy (For Bonding Glass Reinforced Polyester)
- MIL-A-52222 - Adhesive, for Repair of Poncho, Lightweight, with Hood (Use MIL-C-2399)
- MIL-A-52247 - Adhesive, Paper Label Water Resistant, (Use MMM-A-179)
- MIL-A-52264 - Adhesive, Synthetic, Rubber, Nitrile-Rubber and Vinyl-Resin Base
- MIL-A-52611 - Adhesive, Vinyl, Fumigant Shroud
- MIL-A-5433 - Adhesive, Application of Room-Temperature and Intermediate-Temperature-Setting Resin (Phenol, Resorcinol, and Melamine Base)
- MIL-A-5534 - Adhesive, High-Temperature-Setting Resin (Phenol, Melamine and Resorcinol Base)
- MIL-A-5535 - Adhesive, Application of High-Temperature-Setting Resin (Phenol, Melamine, and Resorcinol Base)
- MIL-A-5540 - Adhesive, Polychloroprene
- MIL-A-81236 - Adhesive, Epoxy Resin With Polyamide Curing Agent
- MIL-A-81253 - Adhesive, Epoxy Resin with Polyamine Curing AgentINACTIVE FOR NEW DESIGN
- MIL-A-81270 - Adhesive, Synthetic Rubber (No Superseding Document)
- MIL-A-82484 - Adhesive and Sealing Compounds, Cellulose Nitrate Base, Solvent Type (for Ordnance Use)
- MIL-A-82569 - Adhesive, Neoprene Base, Medium Viscosity (No Superseding Document)
- MIL-A-82636 - Adhesive, Butyl, Two Component (No Superseding Document)
- MIL-A-82785 - Adhesive, Two Part, High Strength (No Superseding Document)
- MIL-A-82802 - Adhesive and Sealant (No Superseding Document)
- MIL-A-82834 - Adhesive, Paste, One Part (No Superseding Document)
- MIL-A-82836 - Adhesive, Epoxy Resin, Structural Bonding, Non-Asbestos (No Superseding Document)
- MIL-A-82842 - Adhesive, Conductive, Low Resistivity (No Superseding Document)
- MIL-A-82843 - Adhesive, Elevated Temperature Curing (No Superseding Document)
- MIL-A-82845 - Adhesive, Paste, one-Part, Non-Asbestos (No Superseding Document)
- MIL-A-83376 - Adhesive Bonded Metal Faced Sandwich Structures, Acceptance Criteria
- MIL-A-83377 - Adhesive Bonding (Structural) for Aerospace and Other Systems, Requirements for (No Superseding Document)
- MIL-A-8431 - Adhesives, Heat Resistant, Airframe Structural, Metal to Metal (Superseded by MIL-A-5090)
- MIL-A-85705 - Adhesive, Aircraft, for Structural Repair (No Superseding Document)
- MIL-A-8576 - Adhesive, Acrylic Base, for Acrylic Base Plastic (Superseded by SAE AMS-A-8576)
- MIL-A-8623 - Adhesive, Epoxy Resin, Metal to Metal Structural Bonding (Superseded by MMM-A-134)
- MIL-A-87134 - Adhesive, Contact, for Custom Fit Helmet Liners (No Superseding Document)
- MIL-A-87135 - Adhesives, Non-Conductive, for Electronics Application (No Superseding Document)
- MIL-A-9067 - Adhesive Bonding, Process and Inspection Requirements for (No Superseding Document)
- MIL-A-9117 - Adhesive; Sealing, for Aromatic Fuel Cells and General Repair
- MIL-A-927 - Adhesive, Synthetic Resin (for Phenolic Laminates) (No Superseding Document)
- MIL-A-928 - Adhesive, Metal to Wood, Structural (Use MMM-A-138)
- MIL-B-2747 - Balsa (Cochroma)
- MIL-C-10523 - Cement, Gasket, for Automotive Applications
- MIL-C-10668 - Cement, Liquid and Cemented Tape, for Tent Construction
- MIL-C-12850 - Cement, Rubber (Superseded by MMM-A-182)
- MIL-C-13792 - Cement, Vinyl, Acetate Base Solvent Type
- MIL-C-18726 - Cement, Vinyl Alcohol-Acetate
- MIL-C-23092 - Cement, Natural Rubber; Magnetic Minesweeping Cable Repair
- MIL-C-2399 - Cement, Liquid, Tent Patching (No Superseding Document)
- MIL-C-2749 - Cement, Synthetic (for Hard Cellular Buoyancy-Material)
- MIL-C-3469 - Canada Balsam (Superseded by MIL-A-3920)
- MIL-C-4003 - Cement, General Purpose Synthetic Base (Superseded by MIL-A-5092)
- MIL-C-47171 - Curing Agent, Mixed Amine (No Superseding Document)
- MIL-C-5539 - Cement, Natural Rubber (Superseded by MMM-A-139)
- MIL-C-81247 - Curing Agent, Bicyclo Anhydride Type
- MIL-C-82805 - Compound, Silicone Rubber, High Strength, Two-Part (No Superseding Document)
- MIL-C-897 - Cement, Rubber (Synthetic-Rubber-To Synthetic-Rubber Adhesion)
- MIL-G-20469 - Glue (for Use in the Loading of Ammunition).
- MIL-G-3937 - Glue, Vegtable
- MIL-G-413 - Glue, Marine, & Aviation Marine (Waterproof)
- MIL-G-46030 - Glue, Animal (Protective Colloid) (No Superseding Document)
- MIL-G-6803 - Gluing, Application of Cold-Setting Resin (Urea Type)
- MIL-G-6804 - Glue, Aviation-Marine, Waterproof (Use MIL-G-413)
- MIL-HDBK-337 - Adhesive Bonded Aerospace Structure Repair
- MIL-HDBK-691 - Adhesive Bonding
- MIL-HDBK-725 - Adhesives: a Guide To Their Properties and Uses as Described by Federal and Military Specifications
- MIL-K-38745 - Kit, Multi-Component Liquid Resin Systems, in Pliable Enclosures (No Superseding Document)
- MIL-L-47274 - Liquid Imine Curing Agent (No Superseding Document)
- MIL-P-47124 - Primer, Adhesive, for Use With Silicones (No Superseding Document)
- MIL-P-47125 - Primer for Silicone Rubber Insulating Material (No Superseding Document)
- MIL-P-47170 - Primer, Silicone Rubber Sealant (Superseded by A-A-59116)
- MIL-P-47216 - Primer, Polyurethane (No Superseding Document)
- MIL-P-47275 - Primer, Silicone (No Superseding Document)
- MIL-P-47276 - Primer, Bonding (No Superseding Document)
- MIL-P-47277 - Primer, Special Purpose
- MIL-P-47278 - Primer, Silicone Rubber (No Superseding Document)
- MIL-P-47279 - Primer, Silicone Adhesive (No Superseding Document)
- MIL-P-82797 - Primer for Thermal Barrier Material and High-Temperature Sealants (No Superseding Document)
- MIL-P-82816 - Primer, Adhesive (No Superseding Document)
- MIL-P-82823 - Primer, Adhesive, Chlorinated Rubber Base (No Superseding Document)
- MIL-PRF-32662 - Adhesive, High-Loading Rate, for Structural and Armor Applications
- MIL-PRF-9117 - Adhesive; Sealing, for Aromatic Fuel Cells and General Repair
- MIL-STD-3059 - Acceptance Criteria for Adhesives for High-Loading Rate Applications
- MIL-STD-582 - Formula for Casein Solution (for Coating Compound) (Cancelled, 1962, No Superseding Document)
- MIL-V-1154 - Vulcanized Synthetic Rubber To Steel (Use MMM-A-121)
- MMM-A-100 - Adhesive, Animal-Glue (Superseded by A-A-3001)
- MMM-A-101 - Adhesive, HAPs-Free, Bonding Vulcanized Synthetics Rubber to Steel
- MMM-A-105 - Adhesive & Sealing Compounds Cellulose Nitrate Base, (Solvent Type)
- MMM-A-1058 - Adhesive, Rubber Base, (in Pressurized Dispensers)
- MMM-A-110 - Adhesive, Asphalt, Cut-Back Type (for Asphalt and Vinyl Asbestos Tiles)
- MMM-A-115 - Adhesive, Asphalt, Water Emulsion Type (for Asphalt & Vinylasbestos Tile)Superseded By A-A-3
- MMM-A-121 - Adhesive, Bonding Vulcanized Synthetic Rubber to Steel
- MMM-A-122 - Adhesive, Butadiene Acrylonitrile Base, Medium Solids, General Purpose+Canceled No S/S
- MMM-A-125 - Adhesive, Casein-Type, Water-and Mold Resistant
- MMM-A-130 - Adhesive, Contact +Cancelled, 1996, Use A-A-1936
- MMM-A-131 - Adhesive, Glass-To-Metal (for Bonding of Optical Elements
- MMM-A-132 - Adhesives, Heat Resistant, Airframe Structural, Metal To Metal
- MMM-A-134 - Adhesive, Epoxy Resin, Metal To Metal Structural Bonding
- MMM-A-137 - Adhesive, Resilient Flooring (Water Soluble)
- MMM-A-138 - Adhesive, Metal To Wood, Structural
- MMM-A-139 - Adhesive, Natural or Synthetic Natural Rubber
- MMM-A-150 - Adhesive for Acoustical Materials
- MMM-A-1617 - Adhesive, Rubber Base, General Purpose
- MMM-A-1754 - Adhesive & Sealing Compound, Epoxy, Metal Filled
- MMM-A-177 - Adhesive, Paste, Office and Photomounting +Cancelled, 1978,No S/S Document+
- MMM-A-178 - Adhesive, Paper Label, Water-Resistant +Cancelled, 01/17/86,Superseded By MMM-A-179
- MMM-A-179 - Adhesive: Paper Label
- MMM-A-180 - Adhesive, Polyvinyl Acetate Emulsion +Cancelled, 1996, Use A-A-1270 & A-A-3001
- MMM-A-181 - Adhesive, Phenol, Resorcinol, or Melamine Base
- MMM-A-182 - Adhesive, Rubber
- MMM-A-185 - Adhesive, Rubber (for Paper Bonding)
- MMM-A-187 - Adhesive, Epoxy Resin Base Low & Intermediate Strength, General Purpose
- MMM-A-188 - Adhesive, Urea-Resin-Type (Liquid & Powder)+Canceled, Superseded ByA-A-3052+
- MMM-A-189 - Adhesive, Synthetic Rubber, Thermoplastic General Purpose
- MMM-A-193 - Adhesive, Vinyl Acetate Resin Emulsion +Cancelled, 1981, S/Sby MMM-A-180C Class B
- MMM-A-1931 - Adhesive, Epoxy, Silver Filled, Conductive
- MMM-A-1993 - Adhesive, Epoxy, Flexible, Filled (for Binding, Sealing & Grouting)
- MMM-A-2015 - Adhesive, Semi-Solid, Stick Form, With Dispenser +Cancelled,1995, Use A-A-342
- MMM-A-2048 - Adhesive, Fire-Resistant, Thermal Insulation +Cancelled, 1995, Use MIL-A-3316
- MMM-A-250 - Adhesive, Water-Resistant (for Closure of Fiberboard Boxes)
- MMM-A-260 - Adhesive, Water-Resistant, (for Sealing Waterproofed Paper)
- MMM-M-792 - Mucilage +Cancelled, 1979, Superseded By MMM-A-180
- MS-35499 - Adhesive, Liquid, Tent Patching, Colors, Container Sizes, and Use Characteristics Thereof (Use MIL-C-2399)
- MS-35501 - Adhesive, Rubber, Photographer's and Artist's Colors, Container Sizes, and Use Characteristics Thereof
- MS-35619 - Canada Balsam, Sealing Compound for Optical Elements, Colors, Container Sizes, and Use Characteristics Thereof (Superseded by MIL-B-3469, Now MIL-C-3469)
- O-A-166 - Adhesive, Water-Resistant (for Sealing Waterproof Paper) +Cancelled, No S/S Document 1
- O-P-106 - Paste, Linoleum +Cancelled, 1965, Use MMM-A-137
- QPL-1154 - Adhesive, Vulcanized Synthetic Rubber To Metal and To Vulcanized Synthetic Rubber Bonding (Use QPL-MMM-A-121)
- QPL-140 - Adhesive, Water-Resistant, Waterproof Barrier-Material
- QPL-14443 - Adhesive, Glass-To-Metal (for Bonding of Lenses) Use Qpl MMM-A-00131
- QPL-18065 - Adhesive, High Initial Bond
- QPL-21016 - Adhesive, Resilient Deck Covering
- QPL-22397 - Adhesive, Phenol and Resorcinol Resin Base (for Marine Service Use)
- QPL-23092 - Cement, Natural Rubber
- QPL-24084 - Adhesive, Plastic Sheet Vibration Damping
- QPL-24179 - Adhesive, Flexible Unicellular-Plastic Thermal Insulation
- QPL-24456 - Adhesive for Plastic Vibration-Damping Tiles
- QPL-25457 - Adhesive, Air-Drying, Silicone Rubber
- QPL-25463 - Adhesive, Film Form, Metallic Structural, Sandwich Construction (No Superseding Document)
- QPL-3316 - Adhesives, Fire-Resistant, Themal Insulation
- QPL-3920 - Adhesives: Optical Thermosetting
- QPL-397 - Adhesive, Room-Temperature and Intermediate-Temperature Setting Resin (Phenol, Resorcinol, and Melamine Base)
- QPL-4003 - Cement, General Purpose Synthetic Base
- QPL-48611 - Adhesive System Epoxy - Elastomeric, for Glass to Metal
- QPL-5090 - Adhesive, Heat Resistant, Airframe Structural, Metal To Metal (Use QPL-MMM-A-132)
- QPL-5092 - Adhesive, Rubber Base, General Purpose
- QPL-5539 - Adhesive, Natural or Synthetic Natural Rubber
- QPL-5540 - Adhesive, Polychloroprene
- QPL-85705 - Adhesive, Aircraft, for Structural Repair (No Superseding Document)
- QPL-8623 - Adhesive, Epoxy Resin, Metal To Metal Structural Bonding
- QPL-9117 - Adhesive, Aromatic Fuel Cells and Generl Repair
- QPL-928 - Adhesive, Metal To Wood, Structural
- QPL-AMS-A-25463 - Adhesive, Film Form, Metallic Structural, Sandwich Construction
- QPL-MMM-A-101 - Adhesive, HAPs-Free, Bonding Vulcanized Synthetics Rubber to Steel
- QPL-MMM-A-121 - Adhesive, Bonding Vulcanized Synthetic Rubber To Steel
- QPL-MMM-A-131 - Adhesive, Glass-To-Metal (for Bonding of Optical Elements)
- QPL-MMM-A-132 - Adhesives, Heat Resistant, Airframe Structural; Metal to Metal
- QPL-MMM-A-134 - Adhesive, Epoxy Resin, Metal To Metal Structural Bonding
- QPL-MMM-A-138 - Adhesive, Metal To Wood, Structural
- QPL-MMM-A-139 - Adhesive, Natural or Synthetic Natural Rubber
- QPL-MMM-A-1617 - Adhesive, Rubber Base, General Purpose
- SS-A-128 - Adhesive, Asphalt, Cut-Back Type (for Asphalt Tile) Cancelled and replaced by MMM-A-110
- SS-A-150 - Adhesive Compound, Fatty Acid Pitch Base (for Use With Fiber-Glass, +Canc,1973, No S/S
- ZZ-C-191 - Cement, Rubber (Artists, & Photographers, & Cold-Patching) +Cancelled, 1975, Use MMM-a