FSC 5365: Bushings, Rings, Shims, and Spacers
The following documents are a part of this series:- A-A-52153 - Plug, Machine Thread, Magnetic: Drain (Cancelled, 1991, Without Replacement)
- A-A-59557 - Ring, Dee - Medium
- A-A-59558 - Ring, Lock, Serrated
- A-A-59561 - Shim, Solid, Round
- A-A-60032 - Spacers, Cadmium and Hexavalent-Chromium Free
- AMS-4311 - Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
- AMS-7325 - Ring, Sealing, Tubular Metal, Corrosion & Heat Resistant Steel +Superseded By as-7325, 1993
- AMS-7490 - Rings, Flash Welded, Corrosion & Heat-Resistant Austenitic Steels, AUSTENITIC-Type Iron, N
- AMS-7493 - Rings, Flash Welded, Ferritic and Martensitic Corrosion-Resistant Steels
- AMS-7496 - Rings, Flash Welded, Carbon and Low-Alloy Steels
- AMS-7498 - Rings, Flash Welded Titanium and Titanium Alloys
- ANSI-B27.7 - General Purpose Tapered and Reduced Cross Section Retaining Rings (Metric)
- AS-3215 - Ring, Retaining-Spiral, Internal, Heavy Duty, Cres
- AS-3216 - Ring, Retaining-Spiral, External, Heavy Duty, Cres
- AS-3217 - Ring, Retaining-Spiral, Internal, Light Duty, Cres
- AS-3435 - Spacer, Sleeve - For .190 Inch Bolt, AMS4901 or AMS4921
- AS-3436 - Spacer, Sleeve - For .250 Inch Bolt, AMS4901 or AMS4921
- AS-3472 - Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286
- AS-4299 - Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
- AS-51990 - Ring, Lock, Serrated
- AS-51997 - Ring, Lock, Serrated-High Strength
- AS-90708 - Ring, Retaining, External, Interlocking
- AS-9902 - Plug, Machine Thread Drilled, Preformed Packing, AS8879 Thread (UNS S34700)
- CSA-ISO/IEC-8613-1 - Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles (Adopted ISO/IEC 8613-1:1994, second edition, 1994-12-15)
- DOD-S-63544 - Shim, Metric, General Specification
- DOD-S-63544/1 - Shim, Cres, Metric
- DOD-S-70328 - Spacer, Ring, Metric, General Specification For
- DOD-S-70328/1 - Spacer, Ring, Metric
- MA-3437 - Spacer, Sleeve - for 5 mm Bolt, AMS4901 or AMS4921, Metric
- MA-3438 - Spacer, Sleeve - for 6 mm Bolt, AMS4901 or AMS4921, Metric
- MA-4016 - Ring, Retaining - External, Spiral Wound, Heavy and Medium Duty CRES, Metric
- MA-4017 - Ring, Retaining - Internal, Spiral Wound, Heavy & Medium Duty, Cres, Metric
- MA-4020 - Ring, Retaining, External, Tapered, Type I, Class 2, AMS 5520, Metric
- MA-4021 - Ring, Retaining - Internal, Tapered, Type I, Class 1, AMS 5520, Metric
- MA-4029 - Ring, Retaining - Internal, Beveled, Tapered, Type II, Class 1, AMS 5520, Metric
- MA-4030 - Ring, Retaining - External, Reinforced E-Ring, Type I, Class 3, AMS 5520, Metric
- MA-4035 - Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specific
- MA-4036 - Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric
- MIL-DTL-27426 - Rings, Retaining, Spiral (Uniform Cross Section)
- MIL-DTL-27426/1 - Rings, Retaining, Spiral (Uniform Cross Section) Medium Duty External
- MIL-DTL-32373 - Plug, Machine Thread, Magnetic: Drain
- MIL-DTL-3390 - Rings, Dee
- MIL-DTL-85069 - Sleeves and Grommets, Fastener,
- MIL-DTL-85069/10 - Sleeve (Grommet), Hard Seat, Reduced Head, Swaged, Countersunk, Panel Fastener
- MIL-DTL-85069/11 - Sleeve (Grommet), Hard Seat, Tension Head, Swaged, Countersunk, Panel Fastener
- MIL-DTL-85069/2 - Sleeves, Fastener, Grooved, Protruding Head, Shear and Tension, 1/64 Oversize
- MIL-DTL-85069/3 - Sleeves, Fastener, Grooved, 100 Degrees Flush Reduced Head, Shear, 1/64 Oversize
- MIL-DTL-85069/4 - Sleeves, Fastener, Grooved, 100 Degrees Flush Head, 1/64 Oversize
- MIL-DTL-85069/5 - Sleeves, Fastener, Grooved, 100 Degrees Flush Full Head, Tension, 1/64 Oversize
- MIL-DTL-85069/6 - Sleeves, Fastener, Grooved, Protruding Head, Shear and Tension, 1/32 Oversize
- MIL-DTL-85069/7 - Sleeves, Fastener, Grooved, 100 Degrees Flush Reduced Head, Shear, 1/32 Oversize
- MIL-DTL-85069/8 - Sleeves, Fastener, Grooved, 100 Degrees Flush Head, 1/32 Oversize
- MIL-DTL-85069/9 - Sleeves, Fastener, Grooved, 100 Degrees Flush Full Head, Tension, 1/32 Oversize
- MIL-R-21248 - Ring, Retaining (Tapered and Reduced Section Type)
- MIL-R-2327 - Ring, Connecting, Round (No Superseding Document)
- MIL-R-27426 - Rings, Retaining, Spiral (Uniform Cross Section)
- MIL-R-3390 - Rings, Dee
- MIL-R-70337 - Ring, Retaining, Round Section
- MIL-R-70337/1 - Ring, Retaining, Round Section, External, Closed Type
- MIL-S-70334 - Shim, Solid (No Superseding Document)
- MIL-S-70334/1 - Shim, Solid, Round (Superseded by A-A-59561)
- MIL-S-70344 - Shim, Laminated, General Specification for (No Superseding Document)
- MIL-S-70344/1 - Shim, Laminated, Round, Class 1 (.002) Laminates (No Superseding Document)
- MIL-S-70344/2 - Shim, Laminated, Round, Class 2 (.003) Laminates (No Superseding Document)
- MIL-S-85069 - Sleeves, Fastener, General Specification for
- MIL-S-85069/1 - Sleeves, Fastener, Grooved, Reliability and Maintainability (Repair and Maintenance) Requirements for
- MIL-S-85069/10 - Sleeve (Grommet), Hard Seat, Reduced Head, Swaged, Countersunk, Panel Fastener
- MIL-S-85069/11 - Sleeve (Grommet), Hard Seat, Tension Head, Swaged, Countersunk, Panel Fastener
- MIL-S-85069/2 - SLEEVES, FASTENER, GROOVED, PROTRUDING HEAD, SHEAR and TENSION, 1/64 OVERSIZE
- MIL-S-85069/3 - Sleeves, Fastener, Grooved, 100 Deg. Flush Reduced Head, Shear, 1/64 Oversize
- MIL-S-85069/4 - Sleeves, Fastener, Grooved, 100 Deg. Flush Head, 1/64 Oversize
- MIL-S-85069/5 - Sleeves, Fastener, Grooved, 100 Degree Flush Full Head, Tension, 1/64 Oversize
- MIL-S-85069/6 - Sleeves, Fastener, Grooved, Protruding Head, Shear and Tension, 1/32 Oversize
- MIL-S-85069/7 - Sleeves, Fastener, Grooved, 100 Degree Flush Reduced Head, Shear, 1/32 Oversize
- MIL-S-85069/8 - Sleeves, Fastener, Grooved, 100 Deg. Flush Head, 1/32 Oversize
- MIL-S-85069/9 - Sleeves, Fastener, Grooved, 100 Deg. Flush Full Head, Tension, 1/32 Oversize
- MIL-STD-1756 - Ring, Retaining, Preferred for Design, Listing of (No Superseding Document)
- MS-123120 - 123150 - Plug - Straight Thread, 'O' Ring Seal, Aluminum
- MS-16634 - Ring, Retaining, External, Bowed 'E' (Reduced Section Type)
- MS-35844 - Plug, Machine Thread, Magnetic: Drain
- MS-51840 - Plug, Machine Thread, O-Ring
- MS-9404 - Plug, Machine Thread - AMS 5646, Preformed Packing
- NAS-1056 - Spacer, Sleeve-Rivet, High Temperature, Non Magnetic
- NAS-1057 - Spacer, Sleeve, Screw and Bolt, High Temperature, Non Magnetic
- NAS-1327 - Spacer, Thru-Hole, Spline
- NAS-186 - Spacer, Stepped, Swage Type
- NAS-1930 - Ring, Retaining
- NAS-42 - Spacer, Sleeve-Rivet
- NAS-43 - Spacer, Sleeve, Screw and Bolt
- NAS-47 - Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt
- NAS-61 - Spacer, Sleeve, Nonmetallic, Polyamide (Nylon), Screw and Bolt
- SAE-J532 - Automotive Straight Thread Filler and Drain Plugs