FSC 5340: Hardware, Commercial
The following documents are a part of this series:
ASTM:
US GOVERNMENT DOCUMENTS:
- A-A-1011 - Caster, Swivel (Chair)
- A-A-1012 - Caster, Swivel (Industrial Duty)
- A-A-1013 - Lock Office Machine
- A-A-1038 - Seal, Antipilfreage
- A-A-1039 - Seal, Antipilferage
- A-A-1040 - Key Chain, Reel (Door Key and Drill Chuck Keys)
- A-A-1191 - Strap, Retaining
- A-A-1192 - Bracket, Pipe
- A-A-1193 - Hanger, Picture (Magnetic)
- A-A-1194 - Glide, Furniture
- A-A-1196 - Cup Furniture
- A-A-1384 - Holder, Door
- A-A-1718 - Magnetic Strip
- A-A-1721 - Hook, Coat & Hat (Robe Hook, Bathroom)
- A-A-1922 - Shield, Expansion (Caulking Anchors, Single Lead)
- A-A-1923 - Shield Expansion (Lag, Machine & Externally Threaded Wedge Bolt Anchors)
- A-A-1924 - Shield, Expansion (Self Drilling Tubular Expansion Shell Bolt Anchors)
- A-A-1925 - Shield, Expansion (Nail Anchors)
- A-A-1926 - Closer, Door
- A-A-1927 - Padlock
- A-A-1928 - Padlock (Combination)
- A-A-1930 - Padlock (Disk or Blade Tumbler)
- A-A-1931 - Lock Set, Bored
- A-A-1932 - Lock Set, Rim
- A-A-1951 - Padlock (High Security)
- A-A-2114 - Caster, Rigid (Industr1Al Duty)
- A-A-218 - Hinge, Butt (General Purpose)
- A-A-219 - Hinge, Butt (Cabinet)
- A-A-220 - Hinge, Butt (Spring)
- A-A-224 - Hinge, Tee (Cancelled, 1995, Use ANSI-a156.20)
- A-A-225 - Hinge, Strap (Cancelled, 1995, Use ANSI-a156.20)
- A-A-226 - Hinge, Butt (Transom) (Cancelled, 1995, Replaced by ANSI-a156.1)
- A-A-2738 - Seals, Antipilefrage
- A-A-3068 - Stones, Sharpening
- A-A-462 - Hook & Eye, Door
- A-A-465 - Bracket, Shelf Superseded By ANSI-a156.16
- A-A-466 - Bolt, Barrel Superseded By ANSI-a156.16
- A-A-472 - Hasp, Hinged (Cancelled, Use ANSI-a156.20)
- A-A-480 - Bolt, Chain
- A-A-50432 - Hinge, Butt (Shipboard/Marine)
- A-A-52406 - Clamp, Loop, Muffler
- A-A-52420 - Plug, Expansion
- A-A-52493 - Rod End, Threaded-Linkage, Rigid
- A-A-55586 - Hinge, Butt-Narrow, Non-Template
- A-A-55587 - Hinge, Butt, Broad, Non-Template
- A-A-55588 - Hinge Strap (Offset)
- A-A-55589 - Hinge, Butt, Continuous (Piano) .032 Thickness, .063 Pin DIA
- A-A-55590 - Hinge, Butt, Continuous (Piano) .040 Thickness, .091 Pin DIA
- A-A-55591 - Hinge, Butt, Continuous (Piano) .050 Thickness, .125 Pin DIA
- A-A-55592 - Hinge, Butt, Continuous (Piano) .060 Thickness, .125 Pin DIA
- A-A-55593 - Hinge, Butt, Continuous (Piano) .060 Thickness, .187 Pin DIA
- A-A-55594 - Hinge, Butt, Continuous (Piano) .075 Thickness, .187 and .250 Pin DIA
- A-A-55595 - Hinge, Butt, Continuous (Piano) .090 Thickness, .250 Pin DIA and 375 Pin DIA
- A-A-55596 - Hinge, Butt, Continuous (Piano) .125 Thickness, .375 Pin DIA
- A-A-556 - Strap, Webbing
- A-A-55614 - Shield, Expansion (Non-Drilling Expansion Anchors)
- A-A-55615 - Shield, Expansion (Wood Screw & Lag Bolt Self-Threading Anchors)
- A-A-55617 - Caster, Industrial, Medium Duty
- A-A-55618 - Caster, Swivel, Kingpinless Industrial, Heavy Duty with Towing Application
- A-A-55619 - Caster, Industrial, Heavy Duty
- A-A-55620 - Loops, Slide (for Equipage)
- A-A-56011 - Handle, Folding, Male 90 Deg. Detent
- A-A-56012 - Handle, Folding, Female 90 Deg. Detent
- A-A-56013 - Handle, Folding, Male 90 Deg. Detent
- A-A-56014 - Handle, Folding, Male 65 Deg. Detent
- A-A-59486 - Padlock Set (Individually Keyed or Keyed Alike)
- A-A-59487 - Padlock (Key Operated)
- A-A-60031 - Clevises, Cadmium and Hexavalent-Chromium Free
- A-A-60040 - Clamps, Cadmium and Hexavalent-Chromium Free
- A-A-60046 - Plugs, Cadmium and Hexavalent-Chromium Free
- A-A-60048 - Clamps, Loop, Cadmium and Hexavalent-Chromium Free
- A-A-60052 - Post, Cadmium and Hexavalent-Chromium Free
- AN-100039 - Cover-Type XIII Engine Accessory Drive
- AN-100044 - Cover - Type Xvi, Xvii - C, D, E and F Engine Accessory Drive
- AN-130 - Turnbuckle Assembly and Cable Eye and Fork (Cancelled, Superseded by ms-21251, ms-21252, ms-21255, ms-21256)
- AN-135 - Turnbuckle Assembly - Cable Eye - Pin Eye (Cancelled, Use ms-21251,ms-21254, ms-21255, ms-21256)
- AN-140 - Turnbuckle Assembly - Cable Eye (Cancelled, Use ms-21251, ms-21255, ms-21256)
- AN-145 - Turnbuckle Assembly, Pin Eye - Swaging Terminal (Cancelled, Use ms-21251, ms-21254, ms-21260, ms-21652)
- AN-146 - Turnbuckle Assembly - Fork - Swaging Terminal (Cancelled, Use ms-21251, ms-21254, ms-21260, ms-21652)
- AN-147 - Turnbuckle Assembly - Swaging Terminals (Cancelled, Use ms-21251, ms-21260, ms-21256)
- AN-150 - Turnbuckle Assembly - Fork (Cancelled, Use ms-21251, ms-21252, ms-21256)
- AN-155 - Barrel, Turnbuckle (Cancelled, Superseded by ms-21251)
- AN-161 - Fork Turnbuckle (Cancelled, Superseded by ms-21252)
- AN-162 - Fork - Turnbuckle, for Bearing
- AN-165 - Eye Aircraft Turnbuckle, for Pin (Cancelled, Use ms-21254
- AN-170 - Eye - Aircraft Turnbuckle, for Cable (Cancelled, Use ms-21255
- AN-250 - Hinge - Butt
- AN-251 - Hinge - Continuous
- AN-252 - Hinge, Structural, Extruded (Superseded by Ms 20001)
- AN-253 - Pin, Hinge (Superseded by ms-20253)
- AN-257 - Hinge - Continuous (Use ms-20257)
- AN-4042 - Plug - Spark Plug Hole (18MM-1.5mm Pitch)
- AN-481 - Clevis - Rod End (Cancelled, Use ms-27976)
- AN-486 - Clevis, Rod End Adjusting (Cancelled, Use ms-27975)
- AN-490 - Rod End - Threaded, Aircraft
- AN-5808 - Clamps Aircraft Instruments (Use ms-28042)
- AN-665 - Terminal-Threaded Clevis Type Tie Rod
- AN-671 - Tie Rod - Streamline (6-40)
- AN-673 - Tie Rod & Streamline (No. 10-32)
- AN-674 - Tie Rod & Streamline (1-4-28)
- AN-675 - Tie Rod & Streamline (5-16-24)
- AN-676 - Tie Rod & Streamline (3-8-24)
- AN-677 - Tie Rod & Streamline (7-16-20)
- AN-678 - Tie Rod & Streamline (1-2-20)
- AN-679 - Tie Rod & Streamline (9-16-18)
- AN-680 - Tie Rod & Streamline (5-8-18)
- AN-682 - Tie Rod & Streamline (3-4-16)
- AN-684 - Tie Rod & Streamline (7-8-14)
- AN-686 - Tie Rod & Streamline (1-14)
- AN-701 - Tie Rod & Internal 1000 Lb (No. 6-40)
- AN-703 - Tie Rod & Internal 2100 Lb (No. 10-32)
- AN-704 - Tie Rod & Internal 3400 Lb (1-4-28)
- AN-705 - Tie Rod & Internal 6100 Lb (5-16-24)
- AN-706 - Tie Rod & Internal 8000 Lb (3-8-24)
- AN-707 - Tie Rod - Internal 11,500 Lb (7/16 - 20)
- AN-708 - Tie Rod - Internal 15,500 Lb (1/2 - 20)
- AN-735 - Clamp, Loop Type Bonding
- AN-742 - Clamp, Loop, Plain, Support, Aircraft
- AN-743 - Bracket, Support Clamp
- AN-8008 - Insulator - Vibration
- AN-996 - Ring - Lock
- AND-10069 - Casing Assembly - Installation of Control Flexible
- ANSI-A156.1 - Butts & Hinges (Now BHMA-a156.1)
- ANSI-A156.13 - Mortise Locks & Latches (Now: BHMA-a156.13)
- ANSI-A156.15 - Closer, Holder, Release Devices (Now BHMA-a156.15)
- ANSI-A156.17 - Self Closing Hinges & Pivots (Now: BHMA-a156.17)
- ANSI-A156.2 - Locks & Latches, Bored & Preassembled (Now: BHMA-a156.2)
- ANSI-A156.7 - Hinge Dimensions, Template (Now BHMA-a156.7)
- ANSI-A156.8 - Door controls - Overhead Stops and Holders
- AS-122900 - 122939 - Clamp - Loop Type Support (Heat Resistant) .204 Hole
- AS-14227 - Lock, Rod End, Improved Strength, NAS Lug
- AS-14241 - Clamp, Loop Type, Cushioned Support, Metric
- AS-14242 - Clamp, Loop, Cushioned, Center Mounting, Metric
- AS-14243 - Clamp, Loop, Nylon, Metric (STABILIZED May 2013)
- AS-14244 - Clamp, Loop Type, Bonding, Metric
- AS-14272 - Clamp, Loop, Cushioned, Elongated, Metric
- AS-14298 - Clamp Assembly, Cushioned, Metric
- AS-14487 - CLAMP, LOOP, PLASTIC, WIRE SUPPORT, METRIC (STABILIZED Jul 2013)
- AS-14488 - CLAMP, LOOP, PLASTIC, WIRE SUPPORT, RIBBED INNER DIAMETER, METRIC (STABILIZED Aug 2013)
- AS-14489 - Clamp, Loop, Metal, Plain, Support, Aircraft, Metric
- AS-1895 - Coupling Assembly, V-Retainer, High Pressure, High Temperature, Pneumatic Tube
- AS-1895/1 - Coupling, V-Retainer, Single Latch, Type I Standard Profile
- AS-1895/10 - Flange, Male, Butt Weld, Type I Standard Profile
- AS-1895/11 - Flange, Female, Butt Weld, Type I Standard Profile
- AS-1895/12 - Flange End, Male, Type I Standard Profile, Design Standard
- AS-1895/13 - Flange End, Female, Type I Standard Profile, Design Standard
- AS-1895/14 - Flange End, Male, Type II Low Profile, Design Standard
- AS-1895/15 - Flange End, Female, Type II, Low Profile, Design Standard
- AS-1895/16 - Flange, Male, Integral, Weld Ring, Type II Low Profile
- AS-1895/17 - Flange, Female, Integral, Weld Ring, Type II Low Profile
- AS-1895/18 - Flange, Male, Integral, Weld Ring, Type I Standard Profile
- AS-1895/19 - Flange, Female, Integral, Weld Ring, Type I Standard Profile
- AS-1895/2 - Flange, Male, Seam Weld, Type I Standard Profile
- AS-1895/20 - Coupling, V-Retainer, Double Latch, Type II Low Profile
- AS-1895/21 - Installation, Joint, V-Retainer Coupling Assembly
- AS-1895/22 - Coupling, V-Retainer, Double Latch, Type I Standard Profile
- AS-1895/23 - High Conformance Seal, Type I & II Standard and Low Profile
- AS-1895/3 - Flange, Female, Seam Weld, Type I Standard Profile
- AS-1895/4 - Coupling, V-Retainer, Single Latch, Type II Low Profile
- AS-1895/5 - Flange, Male, Seam Weld, Type II Low Profile
- AS-1895/6 - Flange, Female, Seam Weld, Type II Low Profile
- AS-1895/7 - Seal, Type I and II Standard and Low Profile
- AS-1895/8 - Flange, Male, Butt Weld, Type II Low Profile
- AS-1895/9 - Flange, Female, Butt Weld, Type II Low Profile
- AS-1920 - Plug-Protective Dust and Fluid Seal, Flareless Fitting
- AS-1960/1 - Coupling, Sheet Metal, 40 Deg V-Band, Standard Latch
- AS-1960/2 - Coupling, Sheet Metal, 40 Deg V-Band, Quick Release (Optional Safety) Latch
- AS-1960/3 - Flange, Sheet Metal
- AS-1960/4 - Flange End, Design Standard
- AS-1960/5 - Installation, Joint, 40 Degree V-Band Coupling and Narrow Sheet Metal Flanges
- AS-21919 - Clamp, Loop Type, Cushioned Support
- AS-23190/1 - Straps, Clamps, & Mounting Hardware, Plastic for Cable Harness Tying & Support Clamp, Loop
- AS-25281 - Clamp, Loop, Plastic, Wire Support
- AS-3080 - Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 1.5 Dia Nom Length
- AS-3081 - Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2 Dia. Nom. Length
- AS-3082 - Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2.5 Dia. Nom. Length
- AS-3083 - Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 3 Dia. Nom. Length
- AS-3094 - Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 1.5 Dia. Nom. Length
- AS-3095 - Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2 Dia Nom Length
- AS-3096 - Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length
- AS-3097 - Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 3 Dia Nom Length
- AS-3506 - Insert - Screw Thread, Thin Wall, Self-Locking, UNS N07718, Silver Plated, Class: 185 ksi/1025 Deg F, Procurement Specification
- AS-3508 - Insert - Thin Wall, Short and Long Hole Preparation For
- AS-3509 - Cable, Safety, Kit, Nickel Alloy, UNS N0660
- AS-3510 - Cable, Safety, Kit, Corrosion and Heat Resistant Steel, UNS S32100
- AS-3511 - Cable, Safety, Kit - Corrosion Resistant Steel, UNS S30400
- AS-3543 - Stud, Locked In, Key Locked, Uns S66286, 140 Ksi/1200Mdf, Lightweight, Self-Broaching Keys
- AS-3544 - Stud, Locked In, Key Locked, Uns S66286, 140 Ksi/1200Mdf, Heavy-Duty, Self-Broaching Keys
- AS-3545 - Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286
- AS-3546 - Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Extra Heavy Duty, Self-Broaching Keys, UNS S66286
- AS-3572 - Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286
- AS-3573 - Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286
- AS-3584 - Pin and Plug, Expansion, Set of Parts Cres, 416 or 416Se, Long; STD and .010 Oversize Diameters, Uns S41600/Uns S41623
- AS-3585 - Pin and Plug, Expansion, Set of Parts Cres, 416 or 416Se, STD and .010 Oversize Daimeters, Short, Uns S41600/Uns S41623
- AS-3586 - Pin and Plug, Expansion, Set of Parts Cres, 303, Long, Uns S30300
- AS-3587 - Pin and Plug, Expansion, Set of Parts, STD and .010 Oversize Diameters, Cres 303, Short, Uns S30300.
- AS-3588 - Pin and Plug, Expansion, Set of Parts Al Alloy 2024-T4 and 2024-T351, Short; STD and .010 Oversize Diameters, Uns a92024
- AS-3589 - Pin & Plug, Expansion Set of Parts, Al Alloy 2024-T4 & 2024T351, Long; STD & .010 Over
- AS-4882 - Clamp, Loop, Cushioned, Hinged, Quick Release - Cable or Wire
- AS-49011 - Rod End - Threaded, Aircraft
- AS-4976 - Insert, Screw Thread, Non-Locking, Uns S66286, Locked In, Key Locked, Procurement Specification For
- AS-5117 - Clip, Spring Retention - Electrical Cable
- AS-5355/1 - COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 800 DegF)
- AS-5355/2 - Couplings, Clamp, Grooved, V-Brand, 1.75 To 6.25 Flange Od (-65 To 250 °F)
- AS-5355/3 - COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 DegF)
- AS-5587 - Clamp, Loop, Plain, Support, Aircraft
- AS-7245 - Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification For
- AS-7246 - Inserts, Screw Thread, Helical Coil, 72NI - 15.5CR - 0.95(CB) - 2.5TI - 0.70AL - 7.0FE, Corrosion and Heat Resistant Alloy Procurement Specification For
- AS-7351 - Clamp, Loop Type Bonding
- AS-7431 - Bracket, Support Clamp
- AS-81935/3 - Locking Devices (For Rod End Bearings)
- AS-85052 - Clamp Assembly, Loop Type, Cushioned, General Specificationfor
- AS-85052/1 - Clamp, Loop, Tube 17-7 Ph Cres, 275 Degree F, Fuel & Petroleum Based Hydraulic Fluid Resis
- AS-85052/2 - Clamp, Loop, Tube 17-7 Ph Cres, 275 Degree F, Phosphate Ester Fluid Resistant
- AS-85052/3 - Clamp, Loop, Tube 17-7 Ph Cres, 500 Degree F
- AS-85052/4 - Clamp Support, Loop, Clamp
- AS-85449/3 - Clamp Assembly, Saddle Type, Cushioned, High Temperature
- AS-85449/4 - Clamp Assembly, Saddle Type, Cushioned, PTFE
- AS-85449/5 - Clamp Assembly, Saddle Type, Cushioned, Fire Resistance, Low Smoke Density and Toxicity
- AS-85731 - Fastener, Positive Locking, Electronic Equipment, General Specification For (Cancelled Dec 2015)
- AS-85731/1 - Fastener, Electronic Equipment, Positive Self-Locking
- AS-85731/2 - FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING, FORCE LIMITING (Cancelled Dec 2015)
- AS-85731-A1 - Amendment 1 - Fastener, Positive Locking, Electronic Equipment, General Specification For
- AS-9025 - Clamp - Loop Type Support (Heat Resistant) .265 Hole
- AS-90376 - Cap, Dust, Plastic, Electric Connector (Cancelled Oct 2007, Superseded by AS85049/138)
- AS-91761 - Plug, Expansion - Tapered, AMS 5040
- AS-9228 - BRACKET, ANGLE, 90° .190 BOLT (STABILIZED Feb 2014)
- AS-9230 - Bracket, Angle, 90 Degrees .190 x .312 Bolt (STABILIZED Feb 2014)
- AS-9231 - BRACKET, ANGLE, 90° .190 X .375 BOLT (STABILIZED Feb 2014)
- AS-9349 - Clamp, Loop, Cushioned, Joggled, Cres, .204 Hole
- AS-9353 - Clamp, Loop - Aluminum, .204 Hole
- AS-9354 - Clamp, Loop - Aluminum, .265 Hole
- AS-9379 - Plug, Expansion - AMS 5510
- AS-9380 - Plug, Expansion - AMS 4003
- AS-9391 - Clamp, Loop - Multiple Tube, Detachable Cushion, Ams 5510
- AS-9392 - Cushion, Loop Clamp - Multiple, 3-Tube, AMS 3303
- AS-9393 - Cushion, Loop Clamp - Multiple, 2-Tube, AMS 3303
- AS-9394 - Strap, Retaining-Multiple Tube, AMS 5510
- AS-9395 - Backplate, Retaining Strap AMS 5510
- AS-9514 - Cushion, Loop Clamp-Multiple, 3-Tube, AMS 3677
- AS-9515 - Cushion, Loop Clamp-Multiple, 2-Tube, AMS 3677
- AS-9551 - Bracket, Flat, Steel, Uns G41300, Cadmium Plated
- AS-9552 - Bracket, Flat, Cres Uns S32100
- AS-9592 - Bracket, Angle, 90 Deg, Cres UNS S32100, .190 Bolt
- AS-9593 - Bracket, Angle, 90 Deg, Cres UNS S32100, .190 X .250 Bolt
- AS-9594 - Bracket, Angle, 90°, Cres Uns S32100, .190 X .312 Bolt
- AS-9595 - Bracket, Angle 90 Deg, Cres Uns S32100, .190 X .375 Bolt
- AS-9596 - Bracket, Angle, 90 Degree, Cadmium Plates, Steel UNS G41300, .190 bolt (STABILIZED Mar 2014)
- AS-9597 - Bracket, Angle, 90 Degree, Cadmium Plated, Steel UNS G41300, .190 x .250 bolt (STABILIZED Mar 2014)
- AS-9598 - Bracket, Angle, 90 Degrees, Cadmium Plated, Alloy Steel UNS G41300, .190 x .312 Bolt (STABILIZED Feb 2014)
- AS-9599 - Bracket, Angle, 90 Degrees, Cadmium Plated, Alloy Steel UNS G41300, .190 x .375 Bolt (STABILIZED Feb 2014)
- AS-9600 - Bracket, Angle, 90 Deg, Corrosion and Heat Resistant Steel Uns S41000, .190 Bolt
- AS-9601 - Bracket, Angle, 90 Deg, Cres Uns S41000, .190 X .250 Bolt
- AS-9602 - Bracket, Angle, 90 Deg, Cres Uns S41000, .190 X .312 Bolt
- AS-9603 - Bracket, Angle, 90 Deg, Cres Uns S41000, .190 X .375 Bolt
- BHMA-A156.4 - Door Controls - Closers
- BHMA-A156.6 - Architectural Door Trim
- DOD-I-63274 - Insert, Screw Thread - Thin Wall, Locked in, Metric, General Specification For
- DOD-I-63274/1 - Insert, Screw Thread Thin Wall, Locked in, Metric
- DOD-I-63276 - Insert, Screw Thread, Locked in, Ring Locked, Serrated, Metric, General Specification for [No Superseding Document]
- DOD-I-63276/1 - Insert, Screw Thread, Locked in, Ring Locked, Serrated, Metric
- DOD-P-70330 - Plug, Expansion, Metric, General Specification For
- DOD-P-70330/1 - Plug, Expansion, Carbon Steel, Metric
- DOD-P-70330/2 - Plug, Expansion, Cres, Metric
- DOD-P-70330/3 - Plug, Expansion, Aluminum Alloy, Metric
- DS-14241 - Clamp, Loop Type, Cushioned Support, Metric
- DS-14242 - Clamp, Loop, Cushioned, Center Mounting, Metric
- DS-14243 - Clamp, Loop, Nylon, Metric
- DS-14244 - Clamp, Loop Type, Bonding, Metric
- DS-14269 - Hinge, Continuous, Metric
- DS-14270 - Pin Hinge, Metric
- DS-14272 - Clamp, Loop, Cushioned Elongated, Metric
- DS-14273 - Strap, Retaining, Cushioned, Rectangular, Metric
- DS-14289 - Strap, Retaining, Cushioned, Rectangular, Two Piece, Metric
- DS-14290 - Clamp, Loop, Cushioned, Rectangular, Metric
- DS-14298 - Clamp Assembly, Cushioned Saddle, Metric
- DS-14487 - Clamp, Loop, Plastic, Wire Support, Metric
- DS-14488 - Clamp, Loop, Plastic, Wire Support, Ribbed Inner Diameter, Metric
- DS-14489 - Clamp, Loop, Metal, Plain, Support, Aircraft, Metric
- DS-21445 - Plug, Expansion, Tapered Metric +Cancelled, No S/S Doc.+
- FF-C-460 - Closer, Door
- FF-C-77 - Casters, Rigid & Swivel (Institutional Duty)
- FF-C-82 - Casters, Swivel, Chair
- FF-C-88 - Casters, Rigid & Swivel, Industrial Duty
- FF-H-106 - Hardware, Builder's; Locks & Door Trim: General Specification For
- FF-H-106/1 - Hardware, Builders, Locks & Door Trim, Cylinder Entrance Door Lock Type 121a & 122a
- FF-H-106/2 - Hardware, Builders, Locks & Door Trim, Cylinder Entrance Door Lock Type 123a & 123B
- FF-H-106/3 - Hardware, Builders, Locks and Door Trim. Letter Box Plates
- FF-H-111 - Hardware, Builders; Shelf & Miscellaneous
- FF-H-116 - Hinges, Hardware, Builders
- FF-H-121 - Hardware, Builder's; Door Closers+Superseded By FF-H-121D+
- FF-H-136 - Hardware and Fittings for Lavatory-Partitions +Cancelled, Use FF-H-111 or FF-H-116
- FF-H-1687 - Locks, Office Machine
- FF-H-1819 - Hardware, Builders'; Auxiliary Locks
- FF-H-1820 - Hardware, Builder's; Exit Devices
- FF-L-2740 - Locks, Combination
- FF-L-2890 - Lock Extension (Pedestrian Door, Deadbolt)
- FF-L-2937 - Combination Lock, Mechanical
- FF-L-2938 - Locks, Combination, Electromechanical US Allies
- FF-L-486 - Lock, Cabinet +Cancelled, 2/5/68, No S/S Document+
- FF-P-101 - Padlocks (Superseded by A-A-1928, A-A-1930, A-A-1927, MIL-S-23769)
- FF-P-110 - Padlock, Changeable Combination (Resistant To Opening by Manipulation & Surreptitious
- FF-P-1480 - Padlock, Key Operated (Resistant To Opening by Force, +Cancelled, Superseded By ASTM-F883
- FF-P-2827 - Padlock, Key Operated, General Field Service
- FF-S-2738 - Seals, Antipilferage
- FF-S-325 - Shield, Expansion, Nail, Expansion, & Nail, Drive Screw (Devices, Anchoring, Masonry)
- FF-S-760 - Strap, Retaining, (Metal for Conduit, Pipe, & Cable)
- FF-T-791 - Turnbuckle
- JAN-K-1051 - Keeper, Slide, Plastic, Ball Type
- JJ-S-750 - Strap, Webbing
- MA-14241 - Clamp, Loop Type, Cushioned Support, Metric
- MA-14242 - Clamp, Loop, Cushioned, Center Mounting, Metric
- MA-14272 - Clamp, Loop, Cushioned, Elongated, Metric
- MA-14298 - Clamp Assembly, Cushioned Metric
- MA-14489 - Clamp, Loop, Metal, Plain, Support, Aircraft, Metric
- MA-1565 - Inserts, Screw Thread, Helical Coil Metric Series, Procurement Specification for (STABILIZED Dec 2014)
- MA-1567 - Insert, Screw Thread, Helical Coil, Metric Series, Standard Assembly Dimensions For
- MA-1806 - Spring Clips and Cushion Selection for Metal Tube Support, Metric
- MA-2024 - Flange Profiles, V-Coupling, Design Standard, Metric
- MA-2150 - Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric
- MA-2150/1 - Clamp, Loop Style, Cushioned, With Wedge, Hydrocarbon Fluidresistant, Metric
- MA-2150/2 - Clamp, Loop Style, Cushioned, With Wedge, Phosphate Ester Fluid Resistant, Metric
- MA-2150/3 - Clamp, Loop Style, Cushioned, With Wedge, High Temperature,Metric
- MA-2150/4 - Clamp Support, Loop Clamp, Metric
- MA-2150/5 - Clamp, Loop Style, With Insert, Hydrocarbon Fluid Resistant,Metric
- MA-2150/6 - Clamp, Loop Style, With Insert, Phosphate Ester Fluid Resistant, Metric
- MA-2150/7 - Clamp, Loop Style, With Insert, High Temperature, Metric
- MA-2151 - Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric
- MA-2151/1 - Clamp, Saddle Type, Cushioned, Hydrocarbon Fluid Resistant,Metric
- MA-2151/2 - Clamp, Saddle Type, Cushioned, Phosphate Ester Fluid Resistant, Metric
- MA-2151/3 - Clamp, Saddle Type, Cushioned, High Temperature, Metric
- MA-2151/4 - Clamp, Saddle Type, Cushioned, PTFE, Metric
- MA-2152/1 - Clamp, Center Mount, Bare Metal, Aluminum, Metric
- MA-2152/2 - Clamp, Center Mount, Bare Metal, Stainless Steel, Metric
- MA-2153/1 - Clamp, Loop Type, Bare Metal, Aluminum, Metric
- MA-2153/2 - Clamp, Loop Type, Bare Metal, Stainless Steel, Metric
- MA-2154/1 - Clamp, Rectangular, 2 Piece, Cushioned, With Wedges, Hydrocarbon Fluid Resistant, Metric
- MA-2154/2 - Clamp, Rectangular, 2 Piece, Cushioned, With Wedges, Phosphate Ester Fluid Resistant, Metr
- MA-2154/3 - Clamp, Rectangular, 2 Piece, Cushioned, With Wedges, High Temperature, Metric
- MA-2155/1 - Clamp, Rectangular Loop, Cushioned, With Wedge, Hydrocarbonfluid Resistant, Aluminum, Me
- MA-2155/2 - Clamp, Rectangular Loop, Cushioned, With Wedge, Hydrocarbonfluid Resistant, Stainless St
- MA-2155/3 - Clamp, Rectangular Loop, Cushioned, With Wedge, Phosphate Ester Fluid Resistant, Aluminum,
- MA-2155/4 - Clamp, Rectangular Loop, Cushioned, With Wedge, Phosphate Ester Fluid Resistant, Stainless
- MA-2155/5 - Clamp, Rectangular Loop, Cushioned, With Wedge, High Temperature, Stainless Steel, Metric
- MA-2156/1 - Clamp, Center Mount, Cushioned, Hydrocarbon Fluid Resistant,Metric
- MA-2156/2 - Clamp, Center Mount, Cushioned, Phosphate Ester Fluid Resistant, Metric
- MA-2156/3 - Clamp, Center Mount, Cushioned, High Temperature, Metric
- MA-3294 - Clip - Spring, Tension, Outer 5.5 mm Bolt Hole, AMS 5525, Metric
- MA-3295 - Clip - Spring, Tension, Inner 5.5 mm Bolt Hole, AMS 5525, Metric
- MA-3296 - Cushion - Tube Clamp Support, PTFE, Metric
- MA-3393 - Clip - Spring, Tension, Outer 6.7 mm Bolt Hole, AMS 5525, Metric (STABILIZED Jul 2015)
- MA-3394 - Clip - Spring, Tension, Inner 6.7 mm Bolt Hole, AMS 5525, Metric (STABILIZED Jul 2015)
- MA-3450 - Retainer, Nut and Bolt, Cup Lock, 5 mm and 6 mm, AMS 5510, Metric
- MA-3520 - Insert - Thin Wall, Short Self-Locking, 550 Degrees C, Silver Plated UNS N07718, MJ Thread, Metric (STABILIZED Dec 2014)
- MA-3521 - Insert - Thin Wall, Long Self-Locking, 550 Degrees C, Silver Plated UNS N07718, MJ Thread, Metric (STABILIZED Dec 2014)
- MA-4812 - Insert - Thin Wall, Metric, Short and Long, Hole Preparation For
- MIL-A-18001 - Anodes, Sacrificial Zinc Alloy (Renumbered MIL-DTL-18001)
- MIL-A-18279 - Anode, Corrosion Preventive, Impregnated Graphite, Rods and Bars
- MIL-A-19521 - Anode Retaining Support Plugs and Anode Selection and Installation Design Criteria for Shipboard Condensers and Heat Exchangers
- MIL-A-21412 - Anodes, Corrosion Preventive, Magnesium Alloy, Cast or Extruded Shapes With Cast-in Cores (No Superseding Document)
- MIL-A-23871 - Anodes, Corrosion Preventive, Lead Alloy Rod Shaped (No Superseding Document)
- MIL-A-24625 - Anodes, Corrosion Preventive, Platinum Plated Niobim Wire Type, Catodic Protection
- MIL-A-43671 - Adapter, Reversible, Quick Fit, 1-3/4 Inch (No Superseding Document)
- MIL-A-52818 - Anchor, Guy: Shield, Expansion (No Superseding Document)
- MIL-A-81008 - Adapter, Mounting MX-4773/ASQ-56a (No Superseding Document)
- MIL-B-11027 - Buckles, Center Bar
- MIL-B-1195 - Button, Door
- MIL-B-12973 - Buckles, 2-Inch, Hinged, Double Bar
- MIL-B-17020 - Buckle (Orthopedic)
- MIL-B-1807 - Brace, Corner, Tool Chest
- MIL-B-1921 - Buckle, 1-Inch, Saalbach
- MIL-B-1962 - Buckles, End, 1-Inch (No Superseding Document)
- MIL-B-2331 - Buckles, End Bar, with Tongue (No Superseding Document)
- MIL-B-2505 - Buckle, Center Bar with Tongue
- MIL-B-3493 - Buckles, End Bar With Tongue (for Leather) (No Superseding Document)
- MIL-B-4792 - Bumper, Rubber, Duplex Round
- MIL-B-543 - Buckles, Tongueless and Web Strap
- MIL-B-63954 - Bolt Assembly, Door for Wads
- MIL-B-70332/3 - Bracket, Stop (Bolt Assembly, Clamp) (No Superseding Document)
- MIL-B-81935/3 - Locking Devices (for Rod End Bearings) (Superseded by SAE AS-81935/3)
- MIL-C-1961 - Clip, Marking Tag
- MIL-C-21565 - Clamp, Loop, Plastic, Wire Support (Use MIL-S-23190D)
- MIL-C-24066 - Clip, Component, Non-Electrical, General Specification for (Superseded by NAS1463)
- MIL-C-24066/1 - Clip, Crystal Holder (No Superseding Document)
- MIL-C-24066/2 - Clip, Solid, Spring Tension (Superseded by Nasm24066/2)
- MIL-C-24066/3 - Clip, Single Slot, Spring Tension (Superseded by Nasm24066/3)
- MIL-C-24066/4 - Clip, Double Slot, Spring Tension (Superseded by Nasm24066/4)
- MIL-C-24066/5 - Clip, Holder for Neon Lamp (No Superseding Document)
- MIL-C-27536 - Coupling, Clamp, Grooved, V-Band
- MIL-C-43599 - Caster, for Institutional Duty (Cancelled, 1970, No Superseding Document)
- MIL-C-45905 - Clip, Drawcord (Use Ms 70110)
- MIL-C-45918 - Clevises & Connectors (Rod End)
- MIL-C-4751 - Casters, Rigid and Swivel, Precision Heavy Duty, and Shock Absorbing (Superseded by Nasm4751)
- MIL-C-496 - Clip, End, Strap
- MIL-C-52078 - Cap Plug, Cap, and Plug, Protective, Plastic, Dust and Moisture Seal (Use MIL-C-5501)
- MIL-C-5501 - Caps and Plugs, Protective, Dust and Moisture Seal, General Specification for (Superseded by NAS847)
- MIL-C-5501/1 - Cap and Plug, Protective, Dust and Moisture Seal (Plug Flared Tube End and Straight Threaded Boss) (Superseded by NAS833and NAS836)
- MIL-C-5501/10 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Machine Screw) (Superseded by NAS845)
- MIL-C-5501/11 - Cap and Plug, Protective, Dust and Moisture Seal (Cap Machine Screw) (Superseded by NAS832)
- MIL-C-5501/12 - Cap and Plug, Protective, Dust and Moisture Seal (Cap-Unj Thread) (No Superseding Document)
- MIL-C-5501/13 - Cap and Plug, Protective, Dust and Moisture Seal (Plug Unj Thread) (No Superseding Document)
- MIL-C-5501/14 - Caps, Protective, Dust and Moisture Seal for Resistoflex Dynatube Fittings (Superseded by NAS841)
- MIL-C-5501/15 - Plug, Protective, Dust and Moisture Seal for Resistoflex Dynatube Fittings (No Superseding Document)
- MIL-C-5501/16 - Caps, Protective, Dust and Moisture Seal for AV-8 Aircraft Fittings With British Size Pipe Threads (No Superseding Document)
- MIL-C-5501/17 - Plug, Protective, Dust and Moisture Seal for AV-8 Aircraft Fittings With British Size Pipe Threads (No Superseding Document)
- MIL-C-5501/18 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Flared Tube End and Straight Threaded Boss), Metric (No Superseding Document)
- MIL-C-5501/19 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Flareless Tube End), Metric (No Superseding Document)
- MIL-C-5501/2 - Cap and Plug, Protective, Dust and Moisture Seal (Plug-Flareless Tube End) (Superseded by NAS838 and NAS842)
- MIL-C-5501/20 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Flared and Flareless Fitting), Metric (No Superseding Document)
- MIL-C-5501/21 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Beaded Hose Connection), Metric (No Superseding Document)
- MIL-C-5501/22 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Pipe Thread), Metric (No Superseding Document)
- MIL-C-5501/23 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Pipe Thread), Metric (No Superseding Document)
- MIL-C-5501/24 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Plug, General Purpose), Metric (No Superseding Document)
- MIL-C-5501/25 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Tubing), Metric (No Superseding Document)
- MIL-C-5501/26 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Tubing), Metric (No Superseding Document)
- MIL-C-5501/27 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Machine Screw), Metric (No Superseding Document)
- MIL-C-5501/28 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap Machine Screw), Metric (No Superseding Document)
- MIL-C-5501/29 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Mj Thread), Metric (No Superseding Document)
- MIL-C-5501/3 - Cap and Plug, Protective, Dust and Moisture Seal (Cap Flared and Flareless Fitting) (Superseded by NAS835)
- MIL-C-5501/30 - Caps and Plugs, Protective, Dust and Moisture Seal (Plug-Mj Thread), Metric (No Superseding Document)
- MIL-C-5501/31 - Cap, Circular, Static, Shielding, Electrical Connector
- MIL-C-5501/32 - Cap, D Type, Static Shielding, Electrical Connector
- MIL-C-5501/4 - Cap and Plug, Protective, Dust and Moisture Seal (Cap-Beaded Hose Connection) (Superseded by NAS839)
- MIL-C-5501/5 - Cap and Plug, Protective, Dust and Moisture Seal (Plug Pipe Thread) (Superseded by NAS840)
- MIL-C-5501/6 - Caps and Plugs, Protective, Dust and Moisture Seal (Cap-Pipe Thread) (Superseded by NAS846)
- MIL-C-5501/7 - Cap and Plug, Protective, Dust and Moisture Seal (Cap Plug, General Purpose) (Superseded by NAS834)
- MIL-C-5501/8 - Cap and Plug, Protective, Dust and Moisture Seal (Plug Tubing) (Superseded by NAS843)
- MIL-C-5501/9 - Cap and Plug, Protective Dust and Moisture Seal (Cap Tubing) (Superseded by NAS844)
- MIL-C-5501/COMPLETE - Complete Set of Slash Sheets for MIL-C-5501
- MIL-C-6390 - Clamps and Instruments, Aircraft, Installation Of
- MIL-C-6818 - Clamp, Instrument Mounting, Aircraft (Superseded by Nasm6818)
- MIL-C-7474 - Caster, Industrial (No Superseding Document)
- MIL-C-85052 - Clamp, Loop, Cushion, General Specification for
- MIL-C-85052/1 - Clamp, Loop, Tube 17-7 Ph Cres, 275 Deg. F, Fuel and Petroleum Based Hydraulic Fluid R
- MIL-C-85052/2 - Clamp, Loop, Tube - 17-7 Ph Cres, 275 De g. F, Phosphate Ester Fluid Resistant
- MIL-C-85052/3 - Clamp, Loop, Tube- 17-7 Ph Cres, 500 Deg. F
- MIL-C-85052/4 - Clamp Support - Loop Clamp
- MIL-C-85052/COMPLETE - Clamp, Loop, Cusion, General Specification For
- MIL-C-85449 - Clamp Assembly, Saddle-Type, Cushion, General Specification for (Superseded by Nasm85449)
- MIL-C-85449/1 - Clamp Assembly, Saddle Type, Cushioned, Nbr Rubber, 321 Cres, 275 Deg. F, Fuel Resistant, General Purpose (Superseded by Nasm85449/1)
- MIL-C-85449/2 - Clamp Assembly, Saddle Type, Cushioned, Epr Rubber, 321 Cres, 275 Deg. F, General Purpose (Superseded by Nasm85449/2)
- MIL-C-85449/3 - Clamp Assembly, Saddle Type, Cushioned, Silicone Fabric, Reinforced 321 Cres, 500 Deg. F, General Purpose (Superseded by Nasm85449/3)
- MIL-C-85449/4 - Clamp Assembly, Saddle-Type Cushioned, Ptfe, 321 Cres, -320 Deg. F To 450 Deg. F, General Purpose (Superseded by Nasm85449/4)
- MIL-C-8603 - Clamps, Loop Type, and Straps, Support
- MIL-C-87972 - Casters, Rigid and Swivel, General Specification For
- MIL-C-8956 - Clamps, Loop, Tube Support (for Future Req. Use MIL-C-8603 & MIL-C-85052
- MIL-D-1552 - Dees, Cheek
- MIL-DTL-15021 - Hook, Snap Bolt, Swivel-Eye, and Rings
- MIL-DTL-24625 - Anodes, Impressed Current Cathodic Protection - Platinized Type
- MIL-DTL-27536 - Coupling, Clamp, Grooved, V-Band (Superseded by SAE-AS5355)
- MIL-DTL-27536/1 - Coupling, Clamp, Grooved, V-Band, 1.750 to 14.250 Flange OD (-65 Degree to +800 Degree F) (Superseded by SAE-AS5355/1)
- MIL-DTL-27536/2 - Coupling, Clamp, Grooved, V-Band, 1.750 to 6.250 Flange OD (-450 Degree F to +250 Degree F) (Superseded by SAE-AS5355/2)
- MIL-DTL-27536/3 - Coupling, Clamp, Grooved, V-Band, 1.750 to 14.250 Flange OD (-320 Degree to +1200 Degree F) (Superseded by SAE-AS5355/3)
- MIL-DTL-29181 - Hasp, High Security, Shrouded, for High and Medium Security Padlock
- MIL-DTL-43607 - Padlock, Key Operated, High Security, Shrouded Shackle
- MIL-DTL-45918 - Clevises and Connectors (Rod End)
- MIL-DTL-5683 - Terminal; Tie Rod, Threaded Clevis Type, Aircraft
- MIL-DTL-85052 - Clamp, Loop, Cushion, General Specification for
- MIL-DTL-85052/1 - Clamp, Loop, Tube 17-7 PH CRES, 275 Degrees F, Fuel and Petroleum Based Hydraulic Fluid Resistant
- MIL-DTL-85052/10 - Clamp, Loop, Aluminum 2024-T42, 275 Degrees F, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant
- MIL-DTL-85052/11 - Clamp, Loop, Stainless Steel, 275 Degrees F, Side Lock, Ethylene Propylene
- MIL-DTL-85052/12 - Clamp, Loop, Stainless Steel, 400 Degrees F, Fluorosilicone
- MIL-DTL-85052/13 - Clamp, Loop, Stainless Steel, 212 Degrees F, Chloroprene
- MIL-DTL-85052/14 - Clamp, Loop, Stainless Steel, 500 Degrees F, Silicone Rubber, Fabric Reinforced
- MIL-DTL-85052/15 - Clamp, Loop, Stainless Steel, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE)
- MIL-DTL-85052/16 - Clamp, Loop, Stainless Steel, 275 Degrees F, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant
- MIL-DTL-85052/2 - Clamp, Loop, Tube - 17-7 PH CRES, 275 Degrees F, Phosphate Ester Fluid Resistant
- MIL-DTL-85052/3 - Clamp, Loop, Tube 17-7 PH Cres, 500 Degrees F
- MIL-DTL-85052/4 - Clamp Support - Loop Clamp
- MIL-DTL-85052/5 - Clamp, Loop, Aluminum 2024-T42, 275 Degrees F, Ethylene Propylene
- MIL-DTL-85052/6 - Clamp, Loop, Aluminum 2024-T42, 400 Degrees F, Fluorosilicone
- MIL-DTL-85052/7 - Clamp, Loop, Aluminum 2024-T42, 212 Degrees F, Chloroprene
- MIL-DTL-85052/8 - Clamp, Loop, Aluminum 2024-T42, 500 Degrees F, Silicone Rubber, Fabric Reinforced
- MIL-DTL-85052/9 - Clamp, Loop, Aluminum 2024-T42, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE)
- MIL-DTL-85731/1 - Fastener, Electronic Equipment, Positive Self-Locking
- MIL-F-11075 - Fuze, Bomb an - m173a1 (Inactive for New Design) (Supersededby MIL-L-11075
- MIL-F-11698 - Fastener, Quick Release, Aluminum (No Superseding Document)
- MIL-F-81334 - Foam, Plastic, Flexible, Open Cell, Polyester Type Polyurethane
- MIL-F-85731 - Fastener, Positive Locking, Electronic Equipment General Specification For
- MIL-F-85731/1 - Fastener, Electronic Equipment, Positive Self-Locking
- MIL-F-85731/2 - Fastener, Electronic Equipment, Positive Self-Locking, Force Limiting
- MIL-H-10044 - Hinge, Chest, Offset (No Superseding Document)
- MIL-H-10050 - Hardware, Airborne, Equipage (Use MIL-H-7195)
- MIL-H-1209 - Hook, Screw
- MIL-H-1214 - Hooks, Door
- MIL-H-1237 - Hinges, Butt (for Shipboard Use) (Superseded by A-A-50432)
- MIL-H-15021 - Hook, Snap Bolt, Swivel-Eye, And Rings
- MIL-H-1806 - Handle, Tool Chest
- MIL-H-19985 - Hardware Kit, Fire Door, Automatic Closing
- MIL-H-20622 - Handle, Chest (Surface)
- MIL-H-20665 - Hardware, Trunk and Chest
- MIL-H-24653 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Us1Ng High and Medium Security Padlock.
- MIL-H-24653/1 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Using High and Medium Security Padlock, Style 1
- MIL-H-24653/2 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Using High and Medium Security Padlock, Style 2
- MIL-H-24653/3 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Using High and Medium Security Padlock, Style 3
- MIL-H-24653/4 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Using High and Medium Security Padlock, Style 4
- MIL-H-24653/5 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Using High and Medium Security Padlock, Style 5
- MIL-H-24653/6 - Hasp, High Security, Shrouded for Shipboard Doors and Hatches Using High and Medium Security Padlock, Style 6
- MIL-H-2812 - Hasps, Hinged, and Staples
- MIL-H-29181 - Hasp, High Security, Shrouded, for High & Medium Security Padlock
- MIL-H-29181/1 - Hasp, High Security, Shrouded Mk 2 Mod 9 Using High and Medium Security Padlock Style 1 (Superseded by MIL-H-29181)
- MIL-H-29181/2 - Hasp, High Security, Shrouded Mk 2 Mod 9 Using High Security Padlock Style 2 (Superseded by MIL-H-29181)
- MIL-H-3780 - Hanger & Track Sets, Horizontal Sliding Door-(Future Procurement - Refer To BHMA a156.14)
- MIL-H-43905 - Hasps, High Security Padlocks (Superseded by MIL-DTL-29181)
- MIL-H-43905/1 - Hasp, High Security Padlocks Style 1 (Superseded by MIL-H-43905)
- MIL-H-43905/2 - Hasp, High Security Padlocks Style 2 (Superseded by MIL-H-43905)
- MIL-H-43905/3 - Hasp, High Security Padlocks Style 3 (Superseded by MIL-H-43905)
- MIL-H-43905/4 - Hasp, High Security Padlocks Style 4 (Superseded by MIL-H-43905)
- MIL-H-43905/5 - Hasp, High Security Padlocks, Style 5 (Superseded by MIL-H-43905)
- MIL-H-43905/6 - Hasp, High Security Padlocks- Style 6 (Superseded by MIL-H-43905)
- MIL-H-43905/7 - Hasp, High Security Padlocks - Style 7 (Superseded by MIL-H-43905)
- MIL-H-43905/8 - Hasp, High Security Padlocks - Style 8 (Superseded by MIL-H-43905)
- MIL-H-43905/9 - Hasp, High Security Padlocks - Style 9 (Superseded by MIL-H-43905)
- MIL-H-639 - Hook (for Belts, Straps, and Equipage Items)
- MIL-H-929 - Hook, Coat and Hat (Use FF-H-111)
- MIL-H-9850 - Hinge, Butt, Continous, Piano
- MIL-H-9859 - Handwheel, Ordnance
- MIL-H-9890 - Hardware, Individual Load Carrying Equipment: and Hardware, Miscellaneous
- MIL-H-9896 - Hardware, Universal Load Carrying Sling (No Superseding Document)
- MIL-I-45910 - Insert, Screw Thread Locked in & Ring Locked1 Serrated General Specification For
- MIL-I-45914 - Insert, Screw Thread - Locked in, Key Locked, General Specification For
- MIL-I-45916 - Insert, Screw Thread - Thread Cutting and Thread Forming
- MIL-I-45932/2 - Insert, Screw Thread - Thin Wall, Locked-in, Non Metallic Locking Element (-60 Deg. To Plus 250 Deg. F)
- MIL-I-45932/3 - Insert, Screw Thread - Thin Wall, Locked in, Oversize Replacer
- MIL-I-45934 - Insert, Screw Thread, Keyring Locked, Self Locking and Non Self Locking, 125, 180, and 220 Ksi Ftu, General Specification For
- MIL-I-45934/1 - Insert, Screw Thread Keyring Locked, Self Locking and Non Self Locking, 125 Ksi Ftu
- MIL-I-45934/2 - Insert, Screw Thread, Keyring Locked, Self Locking and Non Self Locking, 180 KSI FTU
- MIL-I-45934/3 - Insert, Screw Thread Keyring Locked, Self Locking, and Non Self Locking, 220 Ksi Ftu
- MIL-I-5432 - Insulator, Vibration (No Superseding Document)
- MIL-L-11075 - Loops, Strap Fastener
- MIL-L-1360 - Latch Set, Rim
- MIL-L-15596 - Locks, Combination for General Services Administration Approved Security Containers, Vault Doors, and Safe Lockers (Superseded by FF-L-2740 and UL-768)
- MIL-L-17832 - Lock Set, Rim, Upright
- MIL-L-2045 - Loop, Strap Fastener, (For Nonequipage Items)
- MIL-L-2898 - Locks, Flush, Metal and Wood Door and Drawer, Naval Shipboard (No Superseding Document)
- MIL-L-2898/1 - Lock, Flush, Type a, Dead Bolt (No Superseding Document)
- MIL-L-2898/2 - Lock, Flush, Type B, Dead Bolt (No Superseding Document)
- MIL-L-29151 - Lock and Lock Sets, Exterior, Ordnance, High Security (No Superseding Document)
- MIL-L-2950 - Locks, Sash and Blind
- MIL-L-3851 - Loops, Slide (For Equipage)
- MIL-L-63953 - Lock, Combination, Assembly
- MIL-L-81935/3 - Locking Devices (for Rod End Bearings)
- MIL-M-12863 - Mount, Vibration (Vibration Mounts MT-1177/U, MT-1178/U, MT-1179/U) (No Superseding Document)
- MIL-M-17185 - Mounts, Resilient, General Specifications and Tests For (Shipboard Application)
- MIL-M-17508 - Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB
- MIL-M-19863 - Mount, Resilient: Type 5B5,000H
- MIL-M-21649 - Mount, Resilient, Type 5M10,000-H
- MIL-M-22322 - Mount, Resilient, Shear (for Use in Shipping Container) (No Superseding Document)
- MIL-M-22673 - Mounting-Plenum MT-2243(*)/ASQ-56 and MT-3946(*)/ASQ-56B
- MIL-M-22674 - Mounting-Plenums MT-2244(*)/ASQ and MT-3659(*)/ASQ (No Superseding Document)
- MIL-M-24476 - Mounts, Resilient: Pipe Support, Types 7M50, 6M150, 6M450, 6M900, and 5M3500
- MIL-M-25431 - Mount, Resilient
- MIL-M-45907 - Mount, Shipping Container, Resilient: Shock and Vibration Damping (Superseded by A-A-52486)
- MIL-M-81288 - Mounting Bases, Flexible Plastic Foam
- MIL-P-15877 - Pipe Support Devices (Hangers and Swaybraces, Shipboard Use)
- MIL-P-17257 - Padlock, Combination, Security (Manipulation Resistant) (Use FF-P-110)
- MIL-P-17578 - Packing Material, Plastic (for Dogs for Watertight Closures) (Symbol 1425)
- MIL-P-17802 - Padlocks and Padlock Sets, Low Security, Key Operated, Regular (Open) Shackle (Superseded by A-A-1927)
- MIL-P-19415 - Plugs, Zinc Anode Retaining, Heat Exchanger Cathodic Protection (Use MIL-A-19521a)
- MIL-P-20691 - Plug, Expansion (Superseded by A-A-52420)
- MIL-P-21769 - Plugs, Fusible, Refrigerant-12 (No Superseding Document)
- MIL-P-23460 - Pin, Quick-Release, Self-Retaining, Positive-Locking (Superseded by NASM-23460)
- MIL-P-24498 - Padlocks, Medium and High Security, Key Operated, Open and Shrouded Shackle, and Hasps (See Notice 1 for Replacement Information)
- MIL-P-43607 - Padlock, Key Operated, High Security, Shrouded Shackle
- MIL-P-43951 - Padlock, Key Operated, Medium Security, Regular Shackle (Superseded by FF-P-2827)
- MIL-P-45952 - Pin, Quick Release, Detent General Specification For
- MIL-P-45952/1 - Pin, Quick-Release, Detent
- MIL-P-584 - Poker (Cancelled, 1993, No Superseding Document)
- MIL-PRF-32407 - Mounts, Resilient (Surface Ship Application)
- MIL-PRF-5501/31 - Cap, Circular, Esd, Protective, Electrical Connector (Superseded by Nasm5501/31)
- MIL-PRF-5501/32 - Cap, ""D"" Type, Esd Protective, Electrical Connector (Superseded by Nasm5501/32)
- MIL-Q-2288 - Quick Release, for One Inch Webbing (Superseded By-MIL-S-10055)
- MIL-R-1676 - Rings, for Buckets and Water Bag Funnel
- MIL-R-45906 - Release, Two Points - Single Pull, Parachutist's Equipment Pack (No Superseding Document)
- MIL-S-11699 - Snaphook, 1-1/8 Fixed Loop Eye, With Spring Closure (Superseded by MIL-S-43770)
- MIL-S-12100 - Shock Mount M-447, M-448, M-449 and Bracket FT-512 (No Superseding Document)
- MIL-S-13334 - Springs, Helical, Compression, for Highly Stressed Artillery Service. (Superseded by MIL-S-13572).
- MIL-S-14197 - Stud, Photogrammetric, Slotted Templet (No Superseding Document)
- MIL-S-1917 - Snap, 1 in. Eye (Heavy)
- MIL-S-1918 - Snap, Hubbard, 11/4 in.
- MIL-S-1919 - Snap, 11/2 in., Swivel Eye (Heavy)
- MIL-S-1920 - Snap, Lock
- MIL-S-1922 - Snap, Bolt, Open Eye
- MIL-S-1959 - Snaps, 3/4 in., With Swivel
- MIL-S-1967 - Snaps, 3/8 Inch
- MIL-S-2032 - Snaphook, 1 1/4-Inch, Bolt Type, Swivel, Round Eye (No Superseding Document)
- MIL-S-21433 - Sockets, Turnbuckles, and Turnbuckle Assemblies - Wire Rope, Wedge, and Threaded Lock Sleeve
- MIL-S-2147 - Snap, German and Harness
- MIL-S-2210 - Snap, Harness, Swivel Eye
- MIL-S-23190/1 - Strap, Clamps, and Mounting Hardware, Plastic for Cable Harness Tying and Support (Superseded by SAE as-23190/1)
- MIL-S-23769 - Seals, Security (Superseded by FF-S-2738)
- MIL-S-2476 - Stone, Sharpening, Multiple, With Oil Reservoir (Army) (Supersedes Jqd 682)
- MIL-S-2578 - Snaphook, Fixed Loop, 3/8, 1/2, 5/8, 3/4, 1 and 1-1/2 Inch (Superseded by MIL-S-43770)
- MIL-S-3960 - Strap, Retaining (Use FF-S-760)
- MIL-S-43353 - Snap Hook, Trigger Type, Fixed Loop Eye, 3/4 Inch (No Superseding Document)
- MIL-S-43384 - Snaphook, 1 Inch, Fixed Loop, Riveted Spring Closure (Superseded by MIL-S-43770)
- MIL-S-43403 - Snaphook, 3/4 Inch Swivel Eye, With Pivot Closure (Superseded by MIL-S-43770)
- MIL-S-43770 - Snap Hooks General Specification for (Superseded by NASM-43770)
- MIL-S-43770/1 - Snap Hook, Wire Body, Fixed Loop Eye, Flat Spring Closure, With Retainer (Superseded by NASM-43770/1)
- MIL-S-43770/10 - Snap Hook, Cast Body, Fixed Loop Eye W/O Roller, Flat Spring Closure, Wide Mouth (Superseded by NASM-43770/10)
- MIL-S-43770/11 - Snap Hook, Cast Body, Fixed Loop Eye W/O Roller, Flat Spring Closure, Light Duty (Superseded by NASM-43770/11)
- MIL-S-43770/12 - Snap Hook, Cast Body, Fixed Round Eye W/O Roller, Flat Spring Closure (Superseded by NASM-43770/12)
- MIL-S-43770/13 - Snap Hook, Cast Body, Fixed Loop Eye W/O Roller, Flat Spring Closure, Narrow Mouth (Superseded by NASM-43770/13)
- MIL-S-43770/14 - Snap Hook, Cast Body, Open Eye, Sliding Bolt Closure (Superseded by NASM-43770/14)
- MIL-S-43770/2 - Snap Hook, Wire Body, Fixed Loop Eye, Side Retaining Closure (Superseded by NASM-43770/2)
- MIL-S-43770/3 - Snap Hook, Cast Body, Fixed Loop Eye With Roller, Flat Spring Closure, Narrow Mouth (Superseded by NASM-43770/3)
- MIL-S-43770/4 - Snap Hook, Cast Body, Fixed Loop Eye With Roller, Flat Spring Closure, Wide Mouth (Superseded by NASM-43770/4)
- MIL-S-43770/5 - Snap Hook, Cast Body, Fixed Eye, Sliding Bolt Closure (Superseded by NASM-43770/5)
- MIL-S-43770/6 - Snap Hook, Cast Body, Swivel Eye, Sliding Bolt Closure (Superseded by NASM-43770/6)
- MIL-S-43770/7 - Snap Hook, Cast Body, Loop Eye Swivel (Superseded by NASM-43770/7)
- MIL-S-43770/8 - Snap Hook, Cast Body, Round Eye Swivel (Superseded by NASM-43770/8)
- MIL-S-43770/9 - Snap Hook, Cast Body, Fixed Loop Eye, Trigger Closure (Superseded by NASM-43770/9)
- MIL-S-6715 - Spring, Helical, Aircraft
- MIL-STD-1758 - Insert, Screw Thread, Preferred for Design, Listing of (No Superseding Document)
- MIL-STD-763 - Locking Devices
- MIL-T-19247 - Tank, Liquid Storage, Nonmetallic, Marine Oil and Water Service (Superseded by ASTM-D3299 or ASTM-D4097)
- MIL-T-22745 - Turnbuckle, Forged Steel, Galvanized, Weldless (Superseded by FF-T-791)
- MIL-T-5684 - Tie Rod, Round and Square, Aircraft
- MIL-T-5685 - Turbuckle, Aircraft (No Superseding Document)
- MIL-T-63960 - Tiedown, Web, Special Purpose
- MIL-T-81364 - T-Bolt, 180,000 Psi, Type 431 Stainless Steel, Manufacturing Process Requirements (No Superseding Document)
- MIL-T-8878 - Turnbuckle, Positive Safetying
- MS-122076 - 122115 - Insert Cres Helical Coil Coarse Thread 1 Dia. Nominal Length
- MS-122116 - 122155 - Insert Cres Helical Coil Coarse Thread 1 1/2 Dia. Nominal Length
- MS-122156 - 122195 - Insert Cres Helical Coil Coarse Thread 2 Dia. Nominal Length
- MS-122196 - 122235 - Insert Cres Helical Coil Coarse Thread 2 1/2 Dia. Nominal Length
- MS-122236 - 122275 - Insert, Cres Helical Coil Coarse Thread, 3 Dia Nominal Length
- MS-122900 - 122939 - Clamp Loop Type Support (Heat Resistant) .204 Hole
- MS-124651 - 124690 - Insert, Cres Helical Coil Fine Thread, 1 Dia Nominal Length
- MS-124731 - 124770 - Insert - Cres Helical Coil Fine Thread, 2 Dia Nominal Length
- MS-124811 - 124850 - Insert - Cres Helical Coil Fine Thread, 3 Dia Nominal Length
- MS-14108 - Fastener, Positive Self-Locking Case Mounting, Electronic Equipment (Superseded by MIL-F-85731/1)
- MS-14109 - Fastener, Positive Self-Locking Case Mounting, Electronic Equipment (With Holding Clamp)
- MS-14198 - Lock, Rod End, Extra Strength, High Profile Lug (Superseded by NASM-14198)
- MS-14227 - Lock, Rod End, Improved Strength, NAS Lug (Superseded by SAE as-14227)
- MS-14271 - Handle, Coupling, Pneumatic Starter
- MS-14274 - Pin, Quick Release, Positive Locking 'l' Handle Single Action, Detent Wrench/Safety Pin (Slotted) (Superseded by SAE as-14274)
- MS-15018 - Handle, Recess, Brass (for Metal Furniture)
- MS-15019 - Catch, Push Button (for Metal Furniture)
- MS-15020 - Handle, T, 2-1/2-Inch, and Nut (for Metal Furniture)
- MS-15021 - Handle, T, 2-Inch, and Nut (for Metal Furniture)
- MS-15022 - Catch, Friction (for Metal Furniture)
- MS-15027 - Lock, Installation of (for Metal Furniture Drawers)
- MS-15029 - Bumper (for Metal Furniture) (for Shipboard Use)
- MS-15030 - Hasp and Keeper (for Metal Furniture)
- MS-15090 - Lever Handle, Lock (for Clothes and Cleaning Gear Lockers)
- MS-15091 - Keeper, Handle, Lock (for Clothes and Cleaning Gear Lockers)
- MS-15092 - Latch, Steel (for Clothes and Cleaning Gear Lockers)
- MS-15093 - Strap, Steel (for Clothes and Cleaning Gear Lockers)
- MS-15094 - Cam Steel (for Clothes and Cleaning Gear Lockers)
- MS-15095 - Escutcheon, Lock Set Part (for Clothes and Cleaning Gear Lockers)
- MS-15096 - T Handle With Hexagon Nut, Steel (for Metal Safe Locker, Type Nos. 1, 3, 4, and 6)
- MS-15097 - Knob, Nickel-Plated Brass (for Drawer Latch for Metal Furniture)
- MS-15242 - Cleat, Topping Lift (Boat Fitting) (Cancelled, No Superseding Document)
- MS-15294 - Button, Door Inspection Standard (Cancelled, No Superseding Document)
- MS-16227 - Channel, Drawer and Case for Metal Furniture
- MS-16652 - Drawer Pull-Latch, Metal Furniture
- MS-16930 - Padlock, Combination, High Security
- MS-16993 - Plug, Fusible, Refrigerant - 12
- MS-17820 - Insert, Helical Coil Installation Thread; Design Standard For
- MS-17984 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, Button Handle (Superseded by NASM-17984)
- MS-17985 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, 'T' Handle (Superseded by NASM-17985)
- MS-17986 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, 'l' Handle (Superseded by NASM-17986)
- MS-17987 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, Ring Handle (Superseded by NASM-17987)
- MS-17988 - Pin, Quick Release, Self-Retaining, Positive Locking, Double Acting, 'T' Handle (Superseded by NASM-17988)
- MS-17989 - Pin, Quick Release, Self-Retaining, Positive Locking, Double Acting, 'l' Handle (Superseded by NASM-17989)
- MS-17990 - Pin, Quick Release, Positive Locking, Double Acting, Ring Handle (Superseded by NASM-17990)
- MS-18012 - Handle, Metal, Spring Bail Type
- MS-18015 - Catch, Clamping and Strike (Concealed Spring Type)
- MS-18018 - Seal, Lead (Superseded by Ms 51938)
- MS-18034 - Strap, Cable, Adjustable, Plastic, Type I, Class 2 (Use ms-3367)
- MS-18035 - Strap, Cable, Identification Adjustable, Plastic, Type 2, Class 2 (Use ms-3368)
- MS-18072 - Ring, Handling, Air Start Coupling (Superseded by ms-14271)
- MS-20000 - Turnbuckle Assembly - Pin Eye, Left and Right Hand
- MS-20001 - Hinge, Butt Structural, Extruded
- MS-20257 - Hinge, Continuous
- MS-21103 - CLAMP, PLAIN, SUPPORT, LOOP, AIRCRAFT, TYPE 1 CLASS A and B (USE AN 742)
- MS-21104 - Clamp, Loop, Cushioned, Wedge, Fuel, Weather Resistant, 212 Deg. F. Type Ii, Class a and B (Superseded by MS-21919)
- MS-21105 - Clamp, Loop, Cushioned, Wedge, Fluid Resistant, 500 Deg. F, Cres, Typp Iii, Class B (Superseded by ms-21105)
- MS-21106 - Clamp, Loop, Cushioned, 1200 Degrees F, Cres Type IV, Class B
- MS-21122 - Clamp, Loop, Cushioned, Wedge, Polytetrafluoroethylene
- MS-21126 - Spacer, Grooved, Self-Retaining Bolt, Aluminum Alloy
- MS-21128 - Spacer, Grooved, Self-Retaining Bolt, Cres
- MS-21208 - Insert, Screw Thread, Coarse and Fine, Free Running, Helical Coil, Cres
- MS-21209 - Insert, Screw Thread, Coarse and Fine, Screw Locking, Helical Coil, Cres (Superseded by NASM-21209)
- MS-21256 - Clip, Locking, Turnbuckle
- MS-21310 - Bolt, Hook, Support Drive Fetter Thread (Pole Line) (No Superseding Document)
- MS-21312 - Handwheel - Revolving Handle With Keyway
- MS-21313 - Padlock Sets - Individually Keyed and Keyed Alike (Superseded by A-A-59486)
- MS-21314 - Strap, Retaining, Two Hole, for Pipe, Conduit, and Cable (Superseded by NASM-21314)
- MS-21315 - Strap, Retaining, Two Hole, for Tubing (Superseded by NASM-21315)
- MS-21322 - Clamp, Loop-Aluminum, Plain and Cushioned (Superseded by NASM-21322)
- MS-21333 - Clamp, Loop-Steel-Plain and Cushioned (Superseded by NASM-21333)
- MS-21334 - Clamp, Loop-Double, Cable or Tube, Steel, Plain and Cushioned (Superseded by NASM-21334)
- MS-21919 - Clamp, Loop Type, Cushioned, Support
- MS-24373 - Caster, Rigid and Swivel, Precision Pneumatic Tired (Superseded by NASM-24373)
- MS-24374 - Caster, Rigid and Swivel, Precision, Spring Mounted (Superseded by NASM-24374)
- MS-24380 - Caster, Industrial (Superseded by A-A-55617, A-A-55618, and A-A-55619)
- MS-24535 - Fastener-Container Closure
- MS-24563 - Coupling Flanges, V-Band, Profile Dimensions for (Superseded by SAE as-24563)
- MS-24585 - Spring, Helical, Compression, for Loads Below 20 Pounds (Superseded by SAE as-24585)
- MS-25086 - Ring, Retaining
- MS-25281 - Clamp, Loop, Plastic, Wire Support (Superseded by SAE as-25281)
- MS-26509 - Mount, Resilient, Cup Type, Specific Load, Class 1
- MS-26510 - Mount, Resilient, Cup Type, Specific Load, Class 2
- MS-26511 - Mount, Resilient, Cup Type, Two To One Load Range, Class 1
- MS-26512 - Mount, Resilient, Cup Type, Two To One Load Range, Class 2
- MS-26513 - Mount, Resilient, Plate Type
- MS-27114 - Coupling, Clamp, Grooved, V Band, 1.750 To 14.250 Flange Od, (Minus 65 Deg. To Plus 800 Deg. F) (Superseded by MIL-DTL-27536/1)
- MS-27115 - Coupling, Clamp, Grooved, V Band, 1.750 To 6.250 Flange Od (Minus 450 Deg. To Plus 200 Deg. F) (Superseded by MIL-DTL-27536/2)
- MS-27116 - Coupling, Clamp, Grooved, V Band, 1.750 To 14.250 Flange Od (Minus 320 Deg. To Plus 1500 Deg. F) (Superseded by MIL-DTL-27536/3)
- MS-27117 - Coupling, Clamp, Grooved, V Band, 14.250 To 24.250 Flange Od, (Minus 320 Deg. To Plus 1500 Deg. F) (No Superseding Document)
- MS-27118 - Coupling, Clamp, Grooved, V Band, 24.250 To 40.250 Flange Od (Minus 320 Deg. To Plus 1500 Deg. F) (No Superseding Document)
- MS-27120 - Clevis, Rod ENG-Turnbuckle (General Purpose) (Superseded by NASM-27120)
- MS-27149 - Casters, Rigid and Swivel, Precision, Heavy Duty
- MS-27281 - Caster, Rigid and Swivel, Precision, Spring Mounted, Pneumatic Tired (No Superseding Document)
- MS-27405 - Clamp - Tube
- MS-27417 - Cap - Propeller Shaft Thread, Shipping
- MS-27601 - Fastener, Self Locking, Case Mounting, Electronic Equipment (With Holding Clamp) (Superseded by ms-14109)
- MS-27954 - Turnbuckle, Body (General Purpose) (Superseded by NASM-27954)
- MS-27956 - Hinge, Butt, Narrow and Broad, Template, Steel
- MS-27957 - Hinge, Butt - Narrow and Broad, Template, Hardware, Builder's, Commercial, Aluminum (Use MIL-H-1237)
- MS-27958 - Hinge, Butt, Narrow and Broad, Template, Brass
- MS-27959 - Hinge, Butt - Narrow and Broad, Without Holes Hardware, Builder S, Commercial, Aluminum (Use MIL-H-1237)
- MS-27960 - Hinge, Butt, Narrow Light, Non Template
- MS-27961 - Hinge, Butt, Broad, Non-Template (Superseded by BHMA-a156.1)
- MS-27962 - Hinge, Butt, Spring, Screen Door, Adjustable (Superseded by BHMA-a156.17)
- MS-27963 - Hinge, Butt, Spring Single Acting, and Double Acting, Adjustable (Superseded by BHMA-a156.17)
- MS-27964 - Hinge, Strap, Cabinet
- MS-27965 - Hasp, Hinged, Safety, With Swivel Staple, Steel (Superseded by BHMA-a156.20)
- MS-27966 - Hinge, butt-Narrow, Non-Template (Superseded by A-A-55586)
- MS-27967 - Hasp, Hinged-Safety, With Fixed Staple, Hardware, Builder's, Miscellaneous, Steel
- MS-27968 - Hinge, Butt, Broad, Non-Template (Superseded by A-A-55587)
- MS-27969 - Hasp, Hinged, Open With Fixed Staple, Steel (Superseded by BHMA-a156.20)
- MS-27970 - Hinge, Tee (Superseded by BHMA-a156.20)
- MS-27971 - Hasp, Hinged, Double Safety, With Fixed Staple, Steel (Superseded by BHMA-a156.20)
- MS-27972 - Hinge-Strap (Superseded by BHMA-a156.20)
- MS-27973 - Hinge, Strap (Offset) (Superseded by A-A-55588)
- MS-27974 - Turnbuckle, General Purpose (No Superseding Document)
- MS-27975 - Clevis, Rod End-Adjusting, Wide and Narrow Forks (Superseded by NASM-27975)
- MS-27976 - Clevis, Rod End-Plain, Wide and Narrow Forks (Superseded by NASM-27976)
- MS-27990 - Pin, Straight, Hinge, Piano (Superseded by A-A-55589, A-A-55590, A-A-55592, A-A-55594, and A-A-55596)
- MS-28042 - Clamp, Instrument Mounting, Aircraft (Superseded by NASM-28042)
- MS-33537 - Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for (Superseded by NASM-33537)
- MS-33591 - Turnbuckle, Lock Wiring Of
- MS-33633 - Inserts, Screw Threaded, Design and Usage Limitation for (See MIL-STD-1515)
- MS-33646 - Insert, Screw Threads, Helical Coil, Assembly and Hole, Dimensions for (Use ms-33537)
- MS-3395 - Mount, Adapter MT-3730/ASQ (No Superseding Document)
- MS-35140 - Strap, Retaining, One Hole, for Pipe, Rigid Conduit and Cable (Superseded by NASM-35140)
- MS-35143 - Spring, Helical
- MS-35146 - Toggle, Hand Lever, Grease Gun (15 and 21-Oz)
- MS-35254 - Brace, Corner, Box 3 Quarter-Round Flanges, 3 Mounting Holes
- MS-35255 - Brack, Corner, Box, Large, 1 Quarter-Round and 2 Cut Flanges, 3 Mounting Holes (No Superseding Document)
- MS-35256 - Brace, Corner, Box, Small, 1 Quarter Round and 2 Cut Flanges, 3 Mounting Holes (No Superseding Document)
- MS-35257 - Brace, Corner, Box, Large, 2 Quarter-Ellipse Flanges, 2 Mounting Holes
- MS-35258 - Brace, Corner, Box, Small, 2 Quarter-Ellipse Flanges, 2 Mounting Holes (No Superseding Document)
- MS-35259 - Brace, Corner, Box, 3 Quarter-Round Flanges, 6 Mounting Holes (No Superseding Document)
- MS-35260 - Brace, Corner, Box, 1 Quarter-Round and 2 Cut Flanges, 4 Mounting Holes (No Superseding Document)
- MS-35261 - Brace, Corner, Box, 2 Quarter-Ellipse Flanges, 4 Mounting Holes (No Superseding Document)
- MS-35647 - Padlocks, Key Operated (Superseded by A-A-59487)
- MS-35648 - Plug, Expansion: Plain (Superseded by A-A-52420)
- MS-35791 - Handle, Bail, Chest, Surface Mounting, Countersunk Holes (Superseded by NASM- 35791)
- MS-35792 - Handle, Bail, Chest, Recessed (Superseded by NASM-35792)
- MS-35793 - Handle, Bail, Chest, Surface Mounting, Plain Holes (Superseded by NASM-35793)
- MS-35812 - Clevis, Rod End-Adjustable and Plain, Steel (Superseded by NASM-35812)
- MS-35813 - Connector, Rod End - Steel
- MS-35821 - Hinge, Butt, Continuous (Piano) .032 Thickness, .063 Pin Dia (Superseded by A-A-55589)
- MS-35822 - Hinge, Butt, Continuous (Piano) .040 Thickness .091 Pin Dia (Superseded by A-A-55590)
- MS-35823 - Hinge, Butt, Continuous (Piano) .050 Thickness, .125 Pin Dia (Superseded by A-A-55591)
- MS-35824 - Hinge, Continuous (Piano) .050 Thickness, .187 Pin Dia
- MS-35825 - Hinge, Butt, Continuous (Piano) .060 Thickness, .125 Pin Dia
- MS-35826 - Hinge, Butt, Continuous (Piano) .060 Thickness, .187 Pin Dia (Superseded by A-A-55593)
- MS-35827 - Hinge, Continuous (Piano) .060 Thickness, .250 Pin Dia.
- MS-35828 - Hinge, Continuous, (Piano) .60 Thickness, .312 8.375 Pin Dia
- MS-35829 - HINGE, BUTT, CONTINUOUS (PIANO) .075 THICKNESS, .187 and .250 PIN DIA (SUPERSEDED BY A-A-55594)
- MS-35830 - HINGE, BUTT, CONTINUOUS (PIANO) .090 THICKNESS .250, and .375 PIN DIA (SUPERSEDED BY A-A-55595)
- MS-35831 - Hinge, Butt, Continuous, (Piano) .125 Thickness, .375 Pin Dia (Superseded By A-A-55596)
- MS-39014 - Clamp, Loop
- MS-39056 - Bushing, Sleeve, Cable Adapter, Flanged (Superseded by ms-3420)
- MS-39085 - Bracket, Angle, Cable Clamp Support
- MS-39087 - Handle, Bow (Superseded by NASM-39087)
- MS-51498 - Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength, Oversize Replacer
- MS-51550 - Buckle, Clamp Style, One Piece With Tongue (No Superseding Document)
- MS-51561 - Turnbuckle, Round Body, Eye and Eye (Type I, Form 1, Class 4) (Superseded by ASTM-F1145)
- MS-51562 - Turnbuckle, Round Body, Jaw and Jaw (Type I, Form 1, Class 7) (Superseded by ASTM-F1145)
- MS-51563 - Turnbuckle, Round Body, Jaw and Eye (Type I, Form 1, Class 8) (Superseded by ASTM-F1145)
- MS-51564 - Turnbuckle, Round Body, Hook and Hook (Type I, Form 1, Class 5) (Superseded by ASTM-F1145)
- MS-51565 - Turnbuckle, Round Body, Hook and Eye (Type I, Form 1, Class 6) (Superseded by ASTM-F1145)
- MS-51566 - Turnbuckle, Spread Body, Jaw and Jaw (Type I, Form 2, Class 7) (Superseded by ASTM-F1145)
- MS-51567 - Turnbuckle, Spread Body, Eye and Eye (Type I, Form 2, Class 4) (Superseded by ASTM-F1145)
- MS-51568 - Turnbuckle, Spread Body, Hook and Eye (Type I, Form 2, Class 6) (Superseded by ASTM-F1145)
- MS-51569 - Turnbuckle, Spread Body, Jaw and Eye (Type I, Form 2, Class 8) (Superseded by ASTM-F1145)
- MS-51570 - Turnbuckle, Pipe, Body, Eye and Eye (Type Ii, Class 4) (Superseded by ASTM-F1145)
- MS-51571 - Turnbuckle, Flat Body, Eye and Eye (Type I, Form 3, Class 4) (Superseded by ASTM-F1145)
- MS-51572 - Turnbuckle, Flat Body, Jaw and Eye (Type I, Form 1, Class 8) (Superseded by ASTM-F1145)
- MS-51573 - Turnbuckle, Flat Body, Hook and Eye (Type I, Form 1, Class 6) (Superseded by ASTM-F1145)
- MS-51574 - Turnbuckle, Flat Body, Jaw and Jaw (Type I, Form 2, Class 7) (Superseded by ASTM-F1145)
- MS-51828 - Snaphook, Fixed Loop (Use MIL-S-43770)
- MS-51925 - Ring, Dee-Medium (SUPERSEDED BY A-A-59557)
- MS-51926 - Clip, End, Strap Type I, Class 1 and Class 2
- MS-51927 - Buckle, Tongueless, I-Bar
- MS-51928 - Clip, Spring Tension
- MS-51929 - Buckle, Spring Action (Superseded by NASM-51929)
- MS-51930 - Pad Eye Welding
- MS-51938 - Seal, Metallic, Lead and Wire (SUPERSEDED BY FF-S-2738)
- MS-51939 - Loop, Strap Fastener (Footman's Loop) (Superseded by NASM-51939)
- MS-51940 - Loop, Slide (for Equipage) (Superseded by A-A-55620)
- MS-51944 - Buckle, Tongueless, 2-Bar
- MS-51956 - Strap, Retaining, One Hole, for Thin Wall Conduit (Emt) (Superseded by NASM-51956)
- MS-51990 - Ring, Lock, Serrated (Superseded by A-A-59558)
- MS-51997 - Ring, Lock, Serrated-High Strength (SUPERSEDED BY SAE AS-51997)
- MS-52150 - Clamp, Loop, Muffler (Superseded by A-A-52406)
- MS-63043 - Rod End, Threaded-Linkage, Rigid (Superseded by A-A-52493)
- MS-63044 - Strap, Retaining, Rectangular, Cushioned (Superseded by NAS-1711)
- MS-70099 - Snap Hook, Quick Release (Superseded by PIA-Ps70099)
- MS-70101 - Adapter, Reversible, Quick Fit, 500 Lbs 1-3/4 Inch (Superseded by PIA-Ps70101)
- MS-70109 - Clip, End, Strap Type Ii, Class 1
- MS-70110 - Clip, Spring Tension, Drawcord (No Superseding Document)
- MS-70111 - Snaphooks, Side Retaining (Use MIL-S-43770)
- MS-87968 - Casters, Rigid and Swivel Industrial Duty
- MS-9012 - Ring-Retaining External, Beryllium Copper
- MS-9013 - Ring-Retaining, External, Steel (ASG)
- MS-9014 - Ring Retaining, Internal, Steel (Asg)
- MS-9017 - Bushing - Screw, Slotted
- MS-9024 - Clamp, Loop-Cushioned, Joggled, .204 Hole (Superseded by NAS-1715)
- MS-9025 - Clamp - Loop Type Support (Heat Resistant) .265 Hole
- MS-90297 - Buckle, Parachute Container
- MS-90376 - Cap, Dust, Plastic, Electric Connector (Superseded by SAE as-90376, NAS831, or NAS837)
- MS-9071 - Boss, 18-1.50 mm Spark Plug Thread Helical Insert, Standard Dimensions for. (Asg)
- MS-9101 - Bracket, Angle, 90 Deg. .190 Bolt
- MS-9102 - Bracket, Angle, 90 Deg. .190 X .250 Bolt
- MS-9103 - Bracket, Angle, 90 Deg. .190 X .312 Bolt (Superseded by ms-9594)
- MS-9104 - Bracket, Angle, .0 DEG. .190 X 375 Bolt
- MS-91406 - MOUNTS, VIBRATION, BEAM-TYPE, CLASSES A and B, COARSE THREAD (FOR USE WITH ELECTRONIC EQUIPMENT IN AIRCRAFT) (SUPERSEDED BY MS-91405 OR MS-91527)
- MS-91427 - Resistors, Variable (Wirewound, Power-Type) Style Rp10, 25 Watts (Use MIL-R-22/3)
- MS-91526 - Mounts, Vibration, Beam-Type, Classes a and B (for Use With Electronic Equipment in Aircraft) (Superseded by ms-91405 or ms-91527)
- MS-91527 - Mount, Vibration, Cup-Type, Classes A-B (for Use With Electronic Equipment in Aircraft)
- MS-9165 - Bracket-90 Deg. Angle, AMS 6350, .190 Bolt
- MS-9166 - Bracket-90 Deg. Angle, AMS 6350, .190 X .250 Bolt
- MS-9167 - Bracket-90 Deg. Angle, AMS 6350, .190 X .312 Bolt
- MS-9168 - Bracket-90 Deg. Angle, AMS 6350, ,190 X .375 Bolt
- MS-9176 - Plug, Expansion - Tapered, AMS 5040
- MS-9228 - Bracket, Angle, 90 Deg, 0.190 Bolt (Superseded by SAE as-9228)
- MS-9229 - Bracket-90 Deg. Angle, AMS 5504, .190 X .250 Bolt
- MS-9230 - Bracket, Angle, 90 Deg. .190 X 312 Bolt (Superseded by SAE as-9230)
- MS-9231 - Bracket, Angle, 90 Deg. .190 X 375 Bolt (Superseded by SAE as-9231)
- MS-9349 - Clamp, Loop, Cushioned, Joggled, Cres, 0.204 Hole (Superseded by SAE as-9349)
- MS-9350 - Clamp, Loop, Cushioned, Joggled, Cres, .265 Hole (Superseded by NAS-1715)
- MS-9351 - Clamp, Loop-Cushioned, Joggled, Aluminum, .204 Hole (Superseded by NAS-1715)
- MS-9352 - Clamp, Loop-Cushioned, Joggled, Aluminum, .265 Hole (Superseded by NAS-1715)
- MS-9353 - Clamp, Loop-Aluminum, .204 Hole (Superseded by SAE as-9353)
- MS-9354 - Clamp, Loop-Aluminum, .265 Hole (Superseded by SAE as-9354)
- MS-9365 - Bracket-Flat, Cres AMS 5510, .190 Bolt
- MS-9366 - Bracket-Flat, Cres AMS 5510, .190 X .250 Bolt (Use ms-9552)
- MS-9367 - Bracket-Flat, Cres AMS 5510, .250 Bolt
- MS-9379 - Plug, Expansion - AMS 5510 (Superseded by SAE as-9379)
- MS-9380 - Plug, Expansion-AMS 4003 (Superseded by SAE as-9380)
- MS-9391 - Clamp, Loop-Multiple Tube, Detachable Cushion, AMS 5510 (Superseded by SAE as-9391)
- MS-9392 - Cushion, Loop Clamp - Multiple, 3-Tube, AMS 3303 (Superseded by SAE as-9392)
- MS-9393 - Cushion, Loop Clamp - Multiple, 2-Tube, AMS 3303 (Superseded by SAE as-9393)
- MS-9394 - Strap, Retaining-Multiple Tube, Detachable Cushion, AMS 5510 (Superseded by SAE as-9394)
- MS-9395 - Backplate, Retaining Strap AMS 5510 (Superseded by SAE as-9395)
- MS-9514 - Cushion, Loop Clamp-Multiple, 3-Tube, AMS3839
- MS-9515 - Cushion, Loop Clamp-Multiple, 2-Tube, AMS 3839
- MS-9551 - Bracket, Flat, Steel, AMS 6350, Cad. Plate (Superseded by SAE as-9551)
- MS-9552 - Plate, Mending (Superseded by SAE as-9552)
- MS-9592 - Bracket, Angle, 90 Deg., Cres, .190 Bolt (Superseded by SAE as-9592)
- MS-9593 - Bracket, Angle, 90 Deg. Cres AMS 5510, .190 X .250 Bolt (Superseded by SAE as-9593)
- MS-9594 - Bracket, Angle, 90 Deg., Cres, .190 X .312 Bolt (Superseded by SAE as-9594)
- MS-9595 - Bracket, Angle, 90 Deg., Cres, .190 X .375 Bolt (Superseded by SAE as-9595)
- MS-9596 - Bracket, Angle, 90 Deg. Steel .190 Bolt (Superseded by SAE as-9596)
- MS-9597 - Bracket, Angle, 90 Deg., Cadmium Plated .190 X .250 Bolt (Superseded by SAE as-9597)
- MS-9598 - Bracket, Angle, 90 Deg., Cadmium Plated, .190 X .312 Bolt (Superseded by SAE as-9598)
- MS-9599 - Bracket, Angle, 90 Deg., Cadmium Plated .190 X .375 Bolt (Superseded by SAE as-9599)
- MS-9600 - Bracket, Angle, 90 Deg., Cres, .190 Bolt (Superseded by SAE as-9600)
- MS-9601 - Bracket, Angle, 90 Deg, Cres, .190 X .250 Bolt (Superseded by SAE as-9601)
- MS-9602 - Bracket, Angle, 90 Deg., Cres .190 X .312 Bolt (Superseded by SAE as-9602)
- MS-9603 - Bracket, Angle, 90 Deg., Cres .190 X .375 Bolt (Superseded by SAE as-9603)
- MS-9825 - Clamp, Loop Cushioned, Joggled, Corrosion Resisting Steel, .204 Hole (Superseded by NAS-1715)
- MS-9826 - Clamp, Loop-Cushioned, Joggled, Corrosion Resistant Steel, .265 Hole
- MSS-SP-69 - Pipe Hangers and Supports - Selection and Application - Cancelled, Use MSS-SP-58
- MSS-SP-89 - Pipe Hangers and Supports - Fabrication and Installation Practices
- NA-0121 THRU 0122 - Bracket, 90 Degree Angle, 2-Rivet Attach, Metric
- NA-0145 - Insert, Screw Thread, Key Locked, Installation and Removal Procedure, Metric
- NA-0146 - Insert, Screw Thread, Key Locked, Alloy Steel, Miniature, Metric
- NA-0147 - Insert, Screw Thread, Key Locked, a286 Cres, Miniature, Metric
- NA-0148 - Insert, Screw Thread, Key Locked, Alloy Steel, Lightweight, Metric
- NA-0149 - Insert, Screw Thread Key Locked, a286 Cres, Lightweight, Metric
- NA-0150 - Insert, Screw Thread, Key Locked, Alloy Steel, Heavy Duty, Metric
- NA-0151 - Insert, Screw Thread, Key Locked, a286 Cres, Heavy Duty, Metric
- NA-0157 - Pin, Quick Release, Self Retaining, Positive Locking, Singleacting, (T) Handle, Metric
- NA-0161 - Pin, Quick Release, Positive Locking, Single Acting, Metric, Procurement Specification For
- NA-0165 - Post, Electrical-Mechanical Equipment, Swage Type, Metric
- NA-0166 THRU 0167 - Insert, Molded-in, Csk Clearance Hole, Sandwich Panel, Al Alloy & Cres, Metric
- NA-0168 THRU 0169 - Insert, Molded-in, Thru Clearance Hole, Sandwich Panel, Al Alloy and Cres, Metric
- NA-0201 - Post, Electrical-Mechanical Equipment, Stud Type, Metric
- NA-0211 - Post, Electrical-Mechanical Equipment, Swage Type, Metric -Aug 85
- NA-0221-0224 - Post, Electrical - Mechanical Equipment, Internal
- NA-0235 THRU 0236 - Insert, Sandwich Panel, Molded in, Csk, Thru Clearance, Al Alloy/Cres, Metric
- NAM-14289 - Strap, Retaining, Cushioned, Rectangular, Two-Piece, Metric
- NAM-14290 - Clamp, Loop, Cushioned, Rectangular, Metric
- NAS-1047 - Turnbuckle Assembly, Forged Carbon Steel, Jaw and Jaw, for Ground Support Eqpt
- NAS-1129 - Standoff, Threaded, Self-Clinching
- NAS-1130 - Insert, Screw Thread, Helical Coil, Free Running and Self-Locking,Tangless
- NAS-1193 - Locking Device, Positive Index
- NAS-1281 - Hook, Snap
- NAS-1282 - Hook, Snap, Bolt
- NAS-1284 - Buckle, Web Strap, Light Duty
- NAS-1328 - Insert, Screw, Threaded, Spline
- NAS-1332 - Pin, Quick Release, Positive Locking, Single and Double Acting
- NAS-1349 - Caster, Light Duty, Rigid and Swivel
- NAS-1382 - Fitting, Tie Down Strap End, Light Duty
- NAS-1383 - Strap Assembly, Two Part Adjustable
- NAS-1384 - Strap Assembly, One Part
- NAS-1385 - Strap Assembly, Loop Type
- NAS-1394 - Insert, Screw Thread, Self-Locking and Non Self-Locking, Metal, Lightweight
- NAS-1395 - Insert, Screw Thread, Self-Locking and Non Self-Locking, Metal, Lightweight
- NAS-1397 - Clamp, Loop, Nylon
- NAS-1463 - Clip, Spring Tension
- NAS-1464 - Clip, Spring Tension
- NAS-1637 - Handle, Latching, Internal and External Release, Components and Assembly
- NAS-1677 - Strap, Retaining, Cushioned, Rectangular, Two Piece
- NAS-170 - Clevis, Engine Control Rod, Adjustable
- NAS-1711 - Strap, Retaining, Cushioned, Rectangular, Open Bottom
- NAS-1712 - Clamp, Loop, Cushioned, Rectangular
- NAS-1713 - Clamp, Loop, Cushioned, Center Mounting
- NAS-1714 - Clamp, Loop, Cushioned, Elongated
- NAS-1715 - Clamp, Loop, Cushioned
- NAS-1716 - Clamp, Loop, Cushioned, Saddle
- NAS-1786 - Post, Electrical-Mechanical Equipment
- NAS-1787 - Clamp, Tube Mounting
- NAS-1795 - Retaining Clip, Replaceable Nut Plate
- NAS-1829 - Post, Electrical, Mechanical Equipment, Stud Type
- NAS-1830 - Post, Electrical-Mechanical Equipment, Swage Type
- NAS-1831 - Post, Electrical, Mechanical Equipment
- NAS-1832 - Insert, Molded in, Blind Threaded, Locking, Nonlocking, Sandwich Panel
- NAS-1838 - Inserts, Screw Thread, Metallic, Keyring Locked, Specification For
- NAS-1839 - Insert Assembly, Threaded Metal, Heavy Duty Self-Locking, Non Self-Locking
- NAS-1840 - INSERT ASSEMBLY, THREADED METAL, LIGHT WEIGHT SELF-LOCKING, NON SELF-LOCKING
- NAS-1873 - Insert, Self-Locking, Thermal Bonded Honeycomb Panel
- NAS-288 - Terminal - Chain To Turnbuckle
- NAS-399 - Latch, Push Button, Adjustable
- NAS-451 - Plug, Button
- NAS-5 - Rod End, Threaded, Alloy Steel, Flash Welding Type
- NAS-559 - Lock - Rod End (Key Type)
- NAS-578 - Retainer, Floating Barrel Nut
- NAS-622 - Hook, Support, Electronic Equipment Clamp
- NAS-813 - Cap, Protective, Electrical Connector
- NAS-814 - Cap, Protective, Flared Fitting
- NAS-816 - Cap or Plug, Protective, Plain Tube or Hole
- NAS-817 - Cap, Protective, Flared Fitting
- NAS-818 - Plug-Protective, Flared Tube, Hose Assembly or as5202 Boss
- NAS-819 - Cap - Protective, Flanged Fitting
- NAS-831 - Cap, Protective, Electrical Connector
- NAS-832 - Cap, Protective, Flared Fitting (Plastic)
- NAS-833 - Plug, Protective, Flared Hose or Tube Assembly
- NAS-834 - Cap or Plug, Protective, Plain Tube or Hole
- NAS-835 - Cap, Protective, Flared Fitting (Metal)
- NAS-836 - Plug, Protective, Flared Tube, Hose Assembly or Ms33649 or as5202 Boss
- NAS-837 - Plug, Protective, Electrical Connector
- NAS-838 - Plug, Protective, Flareless Tube End, Plastic
- NAS-839 - Cap, Beaded Hose Connection, Plastic, Protective
- NAS-840 - Plug, Pipe Thread, Protective, Dust and Moisture Seal
- NAS-841 - Caps, Protective, Dust and Moisture Seal for Beam Seal Fittings
- NAS-842 - Plugs, Protective, Flareless Tube End (Metal)
- NAS-843 - Plug, Tubing, Protective, Dust and Moisture Seal
- NAS-844 - Cap, Tubing, Protective, Dust and Moisture Seal
- NAS-845 - Plug - Machine Screw, Protective, Plastic
- NAS-846 - Cap, Pipe Thread, Protective, Dust and Moisture Seal
- NAS-847 - Caps and Plugs, Protective, Dust and Moisture Seal
- NAS-947 - Cap, Protective, Beaded Tube Assembly
- NASM-14198 - Lock, Rod End, Extra Strength, High Profile Lug
- NASM-21314 - Strap, Retaining, Two Hole, for Pipe, Conduit, and Cable
- NASM-21315 - Strap, Retaining, Two Hole, for Tubing
- NASM-21322 - Clamp, Loop, Aluminum, Plain and Cushioned
- NASM-21333 - Clamp, Loop, Steel, Plain and Cushioned
- NASM-21334 - Clamp, Loop, Double, Cable or Tube, Steel, Plain and Cushioned
- NASM-24066/2 - Clip, Solid, Spring Tension
- NASM-24066/3 - Clip, Single Slot, Spring Tension
- NASM-24066/4 - Clip, Double Slot, Spring Tension
- NASM-24373 - Casters, Rigid and Swivel, Precision, Pneumatic Tired
- NASM-24374 - Casters, Rigid and Swivel, Precision Spring Mounted
- NASM-27120 - Clevis, Rod End, Turnbuckle (General Purpose)
- NASM-27954 - Turnbuckle, Body, General Purpose
- NASM-27975 - Clevis, Rod End, Adjusting, Wide and Narrow Forks
- NASM-27976 - Clevis, Rod End, Plain, Wide and Narrow Forks
- NASM-28042 - Clamp, Instrument Mounting, Aircraft
- NASM-35140 - Strap, Retaining, One Hole for Pipe, Rigid Conduit and Cable
- NASM-35791 - Handle, Bail, Chest, Surface Mounting, Countersunk Holes
- NASM-35792 - Handle, Bail, Chest, Recessed
- NASM-35793 - Handle, Bail, Chest, Surface Mounting, Plain Holes
- NASM-39087 - Handle, Bow
- NASM-43770 - Snap Hooks, General Specification For
- NASM-43770/1 - Snap Hooks, Wire Body, Fixed Loop Eye, Flat Spring Closure, With Retainer
- NASM-43770/10 - Snap Hooks, Cast Body, Fixed Loop Eye W/O Roller, Flat Spring Closure, Wide Mouth
- NASM-43770/11 - Snap Hooks, Cast Body, Fixed Loop Eye W/O Roller, Flat Spring Closure, Light Duty
- NASM-43770/12 - Snap Hooks, Cast Body, Fixed Round Eye W/O Roller, Flat Spring Closure
- NASM-43770/13 - Snap Hook, Cast Body, Fixed Loop Eye, W/O Roller, Flat Spring Closure, Narrow Mouth
- NASM-43770/14 - Snap Hook, Cast Body, Open Eye, Sliding Bolt Closure
- NASM-43770/2 - Snap Hooks, Wire Body, Fixed Loop Eye, Side Retaining Closure
- NASM-43770/3 - Snap Hooks, Cast Body, Fixed Loop Eye With Roller, Flat Spring Closure, Narrow Mouth
- NASM-43770/4 - Snap Hooks, Cast Body, Fixed Loop Eye With Roller, Flat Spring Closure, Wide Mouth
- NASM-43770/5 - Snap Hooks, Cast Body, Fixed Eye, Sliding Bolt Closure
- NASM-43770/6 - Snap Hooks, Cast Body, Swivel Eye, Sliding Bolt Closure
- NASM-43770/7 - Snap Hooks, Cast Body, Loop Eye Swivel
- NASM-43770/8 - Snap Hook, Cast Body, Round Eye Swivel
- NASM-43770/9 - Snap Hooks, Cast Body, Fixed Loop Eye, Trigger Closure
- NASM-4751 - Casters, Rigid and Swivel, Precision Heavy Duty and Shock Absorbing
- NASM-51929 - Buckle, Spring Action
- NASM-51939 - Loop, Strap Fastener (Footman's Loop)
- NASM-51956 - Strap, Retaining, One Hole for Thin Wall Conduit (Emt)
- NASM-5501/31 - Cap, Circular, Esd, Protective, Electrical Connector
- NASM-5501/32 - Cap, 'D' Type, Esd Protective, Electrical Connector
- NASM-6818 - Clamps, Instrument Mounting, Aircraft
- NASM-760 - Strap, Retaining, Metal for Conduit, Pipe, and Cable
- NASM-85449 - Clamp Assembly, Saddle-Type, Cushion, General Specification For
- NASM-85449/1 - Clamp Assembly, Saddle-Type, Cushioned, Nbr Rubber, 321 Cres, 275 Degrees F, Fuel Resi
- NASM-85449/2 - Clamp Assembly, Saddle-Type, Cushioned, Epr Rubber, 321 Cres, 275 Degrees F, General Purpose
- NASM-85449/3 - Clamp Assembly, Saddle-Type, Cushioned, Silicone Rubber, Fabric Reinforced, 321 Cres, 500 Degrees F, General Purpose
- NASM-85449/4 - Clamp Assembly, Saddle-Type, Cushioned, Ptfe, 321 Cres, -320 Degrees F To 450 Degrees F, General Purpose
- QPL-15877 - Hangers, Pipe (Spring Hangers and Swaybraces, Shipboard Use)
- QPL-17191 - Mounts, Resilient; Portsmouth Bonded Spool Type
- QPL-172 - Cases; Bases, Mounting; and Mounts, Vibration (for Use With Electronic Equipment in Aircraft) (No Superseding Document)
- QPL-17508 - Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB
- QPL-17578 - Packing Material, Plastic (for Dogs for Watertight Closures) (Symbol 1425)
- QPL-19863 - Mount, Resilient, Type 5B5000H
- QPL-21565 - Clamp, Loop, Plastic, Wire Support (No Superseding Document)
- QPL-21649 - Mount, Resilient, Type 5M10,000-H
- QPL-23460 - Pin, Quick-Release, Self-Retaining, Positive-Locking (No Superseding Document)
- QPL-27536 - Coupling, Clamp, Grooved, V-Band (No Superseding Document)
- QPL-4751 - Caster, Rigid and Swivel, Precision Heavy Duty, and Shock Absorbing (No Superseding Document)
- QPL-5432 - Insulator, Vibration (No Superseding Document)
- QPL-6818 - Clamp, Mounting, Aircraft Instruments (No Superseding Document)
- QPL-7474 - Casters, Industrial (No Superseding Document)
- QPL-85052 - Clamp, Loop, Cushion, General Specification for
- QPL-85449 - Clamp Assembly, Saddle-Type, Cushion, General Specification for (No Superseding Document)
- QPL-85731 - Fastner, Positive Locking, Electronic Equipment (No Superseding Document)
- QPL-85731-5 - Fastener, Positive Locking, Electronic Equipment
- QPL-FF-L-2740 - Locks, Combination
- QPL-FF-L-2890 - Lock Extension (Pedestrian Door, Deadbolt)
- QPL-FF-P-110 - Padlock, Changeable Combination (Resistant To Opening by Manipulation and Surreptitious Attack)
- QPL-FF-P-1480 - Padlock, Key Operated (Resistant to Opening by Force Pick, and Bypass Techniques) (NO SUPERSEDING Document)
- RR-K-795 - Key Chain, Reel (Door Key & Drill Chuck Keys) (Cancelled, 1985, Superseded By A-A-1040)
- RR-R-795 - Reel, Key Chain (for Door Keys & Drill Chuck Keys) (Cancelled, 1967, Superseded By RR-K-795)
- SAE-J276 - Steering Frame Lock for Articulated Loaders & Tractors
- SAE-J942 - Passenger Car Windshield Washer Systems
- SS-EN-12794 - Precast concrete products - Foundation piles
- UL-437 - Standard for Key Locks
- UL-768 - Standard for Combination Locks
- USAF-STD-750 - Clip - Tube - Open Type
- W-A-450/2 - Components for Interior Alarm Systems, Foil
- W-A-450/3 - Components for Interior Alarm System, Breakwire
- WW-H-171 - Hangers & Supports, Pipe
- ZZ-C-730 - Cups & Glides, Furniture +Cancelled, 1985, Superseded By A-A-1194 &A-A-1196
- ZZ-T-351 - Tip, Cane & Crutch, Rubber