FSC 5325: Fastening Devices
The following documents are a part of this series:- A-A-55621 - Fasteners, Snap, Style 3 Pronged Ring Head Type (16 Ligne)
- A-A-55634 - Zippers (Fasteners, Slide Interlocking)
- A-A-56028 - Eyelet, Lacing
- A-A-60043 - Grommets, Cadmium and Hexavalent-Chromium Free
- AN-226 - Fastener - Cowl, Post Type (See an-10076)
- AN-227 - Fasteners - Snap and Curtain (Inactive, Use ms-27977 Thru ms-27986 for New Design)
- AN-229 - Fastener - Interlocking Slide
- AN-230 - Grommets, Metallic, Plain and Spur, With Washers, Type I and Type Iii (Use ms-20230)
- AN-231 - Grommet and Drainage, Plastic
- AN-233 - Hook - Buckle (Inactive-24 May 1965)
- AN-240 - Eyelet - Lacing
- AN-3195 - Fastener - Snapslide (Use ms-21332)
- AN-3196 - Stud - Style 1 Snapslide Fastener (Superseded by ms-21323)
- AN-3197 - Stud - Style 2 Snapslide Fastener (Superseded by ms-21324)
- AN-3198 - Stud - Style Iii Snapslide Fastener (Use ms-21325)
- AN-3199 - Stud, Style Iv Snapslide Fastener
- AN-930 - Grommetsexcept for Use on Oxygen Systemsrubber (See an931)
- AN-952 - Grommet - Flat, Plastic, Drainage
- AS-14274 - Pin, Quick Release, Positive Locking, 'L' Handle, Single Action, Detent Wrench/Safety Pin (Slotted)
- ASME-B18.27 - Tapered and Reduced Cross Section Retaining Rings (Inch Seri)
- ASME-B18.27.5 - Tapered and Reduced Cross Section Retaining Rings (Inch Series) Part 5 Type NA14 - External Self-Locking Rings; Type NA15 - External Interlocking Rings; Type NA16 - External Bowed Locking Prongs Rings
- DOD-R-63276/2 - Ring, Lock, Serrated, Metric
- MIL-B-70332/1 - Bolt Assembly, Clamp (No Superseding Document)
- MIL-DTL-10884 - Fasteners, Snap
- MIL-DTL-21248 - Ring, Retaining (Tapered and Reduced Section Type)
- MIL-DTL-22529 - Grommet, Edging (Superseded by Nasm22529)
- MIL-DTL-22529/1 - Grommet, Composite, Edging (Superseded by Nasm22529/1)
- MIL-DTL-22529/2 - Grommet, Cushion, Composite, Edging (Superseded by Nasm22529/2)
- MIL-DTL-27426/2 - Rings, Retaining, Spiral (Uniform Cross Section) Heavy Duty External
- MIL-DTL-27426/3 - Rings, Retaining, Spiral (Uniform Cross Section) Medium Duty Internal
- MIL-DTL-27426/4 - Rings, Retaining, Spiral (Uniform Cross Section) Heavy Duty Internal
- MIL-DTL-45910 - Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
- MIL-DTL-45916 - Insert, Screw Thread - Thread Cutting and Thread Forming
- MIL-DTL-45932 - Insert, Screw Thread, Thin Wall, Locked in: General Specification for
- MIL-DTL-45932/1 - Insert, Screw Thread - Thin Wall, Locked in
- MIL-DTL-45932/2 - Insert, Screw Thread - Thin Wall, Locked-In, Non Metallic Locking Element (-60 Degrees to +250 Degrees Fahrenheit)
- MIL-DTL-45932/3 - Insert, Screw Thread - Thin Wall, Locked In, Oversize Replacer
- MIL-DTL-70337 - Ring, Retaining, Round Section
- MIL-DTL-70337/1 - Ring, Retaining, Round Section, External, Closed Type
- MIL-E-18128 - Eyelets, Metallic
- MIL-E-20652 - Eyelets, Metallic, and Eyelet Washers, Metallic, General Specification for (Superseded by NASM-20652)
- MIL-E-20652/1 - Eyelet, Metallic, Rolled Flange Type, and Eyelet Washer (Superseded by NASM-20652/1)
- MIL-E-20652/2 - Eyelet, Metallic, Flat Flange Type (No Superseding Document)
- MIL-E-20652/3 - Eyelet, Metallic, Telescopic Type (No Superseding Document)
- MIL-F-10884 - Fasteners, Snap
- MIL-F-14187 - Fastener, Refrigerator Panel
- MIL-F-22978 - Fastener, Rotary, Quick-Operating, High-Strength (Asg) (Superseded by NASM-22978)
- MIL-F-25173 - Fastener, Control Panel, Aircraft Equipment
- MIL-F-4209 - Fastener, Metal, Nut-Sleeve Assembly (No Superseding Document)
- MIL-F-43573 - Fastener, Snap, Plastic
- MIL-F-51184 - Fasteners, Snap (No Superseding Document)
- MIL-F-5591 - Fasteners; Panel; Nonstructural (Superseded by Nasm5591)
- MIL-F-8490 - Fastener, Case, for Equipment Rack System in Aircraft
- MIL-G-16491 - Grommet, Metallic, General Specification for (Superseded by NASM-16491)
- MIL-G-16491/1 - Grommet, Metallic, Plain, With Toothed Washer (Type Ii) (Superseded by NASM-16491/1)
- MIL-G-16491/2 - Grommet, Metallic, Oblong, With Flat Washer (Type Iv) (Superseded by NASM-16491/2)
- MIL-G-16491/3 - Grommet, Metallic, Oblong, With Raised Washer (Type V) (Superseded by NASM-16491/3)
- MIL-G-17594 - Grommet, Plastic, Unicellular, High Density
- MIL-G-20240 - Grommets, Cotton (for Bolts and Studs)
- MIL-G-20699 - Grommet, Rubber, Split, General Purpose (Use MIL-G-3036)
- MIL-G-22529 - Grommet, Plastic
- MIL-G-22529/1 - Grommet, Composite, Edging (Superseded by MIL-DTL-22529/1, 1995
- MIL-G-3036 - Grommet, Elastic, Hot-Oil and Coolant Resistant
- MIL-G-85613 - Grommet, Hard Seat, Swaged, Countersink; General Specification For
- MIL-G-85613/1 - Grommet, Hard Seat, Reliability and Maintainability (New Construction and Repair) Requirements for
- MIL-G-85613/2 - Grommet, Hard Seat, Swaged, Countersink, Quick-Release, Panel Fastener
- MIL-G-85613/3 - Grommet, Hard Seat, Swaged, Countersink, Tension Head, Panel Fastener
- MIL-HDBK-131 - Identification Markings for Fasteners (Handbook H-131)
- MIL-I-45932 - Insert, Screw Thread, Thin Wall, Locked in: General Specification For
- MIL-I-45932/1 - Insert, Screw Thread - Thin Wall, Locked In
- MIL-I-45934/4 - Insert, Screw Thread, Keyring Locked Hole Dimensions for and Assembly of
- MIL-I-8846 - Inserts, Screw-Thread, Helical Coil (Superseded by Nasm8846)
- MIL-Q-43004 - Quick Release, Slide Fastener, for Air Inflated Shelters (Cancelled, 1966, Use MIL-Q-43400)
- MIL-S-1733 - Support, Snap Fastener
- MIL-STD-1754 - Fastening Devices Preferred for Design, Listing of (No Superseding Document)
- MIL-STD-1792 - Fastening Systems, Mechanical, Air Vehicle
- MIL-STD-700 - Locking Devices for Screw Threaded Fasteners and Other Similar Applications Used in Nuclear Power Plants
- MS-124691 - 124730 - Insert - Cres Helical Coil Fine Thread, 1 1/2 Dia Nominal Length
- MS-124771 - 124810 - Insert - Cres Helical Coil Fine Thread, 2 1/2 Dia Nominal Length
- MS-16624 - Ring, Retaining, External, Basic (Tapered Section Type)
- MS-16625 - Ring, Retaining, Internal, Basic (Tapered Section Type)
- MS-16626 - Ring, Retaining, External, Inverted (Tapered Section Type)
- MS-16627 - Ring, Retaining, Internal, Inverted (Tapered Section Type)
- MS-16628 - Ring, Retaining, External, Bowed (Tapered Section Type)
- MS-16629 - Ring, Retaining, Internal, Bowed (Tapered Section Type)
- MS-16630 - Ring, Retaining, External, Beveled (Tapered Section Type)
- MS-16631 - Ring, Retaining, Internal, Beveled (Tapered Section Type)
- MS-16632 - Ring, Retaining, External, Crescent (Reduced Section Type)
- MS-16633 - Ring, Retaining, External, 'E' (Reduced Section Type)
- MS-17731 - Fastener, Rotary, Quick-Operating, Flush Head, Floating Type, 2210 Lbs Min Tensile Strength (Superseded by NASM-17731)
- MS-17732 - Fastener, Rotary, Quick-Operating, Protruding Head, Floating Type, 2210 Lbs Min Tensile Strength (Superseded by NASM-17732)
- MS-20230 - Grommets, Metallic, Plain and Spur, With Washer, Type I and Type Iii (Superseded by NASM-20230)
- MS-21265 - Grommet, Plastic, Split
- MS-21266 - Grommet, Plastic, Edging (Superseded by NASM-21266)
- MS-21323 - Stud, Style I Snapslide Fastener (Superseded by NASM-21323)
- MS-21324 - Stud - Style Ii Snapslide Fastener (No Superseding Document)
- MS-21325 - Stud - Style Iii Snapslide Fastener (Superseded by NASM-21325)
- MS-21326 - Stud, Style Iv Snapslide Fastener (Superseded by NASM-21326)
- MS-21327 - Fastener Installation-Snapslide (Superseded by NASM-21327)
- MS-21332 - Fastener - Snapslide (Superseded by NASM-21332)
- MS-25420 - Fasteners, Straight, Headed, Swaged Collar Limitations for Use of (Superseded by NASM-25420)
- MS-27600 - Fastener, Self Locking Case Mounting, Electronic Equipment
- MS-27977 - Fastener, Snap, Style 1 (Large Curtain Type)
- MS-27978 - Fastener, Snap, Style 1a (Small Curtain Type) (No Superseding Document)
- MS-27979 - Fastener, Snap, Style Ib (Mud-Proof Curtain Type)
- MS-27980 - Fasteners, Snap, Style 2 (Regular Wire Spring Clamp Type) (Superseded by NASM-27980)
- MS-27981 - Fasteners, Snap, Style 2a (Small Wire Spring Clamp Type) (Superseded by NASM-27981)
- MS-27982 - Fasteners, Snap, Style 3 (Pronged Ring Head Type) (16 Ligne) (Superseded by A-A-55621)
- MS-27983 - Fasteners, Snap, Style 4 (Three Way Locking Type) (Superseded by NASM-27983)
- MS-27984 - Fasteners, Snap, Style 5 (Scalloped Button Head Type) (Superseded by NASM-27984)
- MS-27985 - Fasteners, Snap, Style 6 (Funnel Neck Button Head Type)
- MS-27986 - Fastener, Snap, Style 7 (Rivet Type) (Superseded by NASM-27986)
- MS-3211 - Ring, Retainer, External
- MS-3215 - Ring, Retaining, External, 'E', Reinforced (Reduced Section Type)
- MS-3216 - Ring, Retaining, External, Prong-Lock (Reduced Section Type)
- MS-3217 - Ring, Retaining, External, Heavy-Duty (Tapered Section Type)
- MS-3498 - Screw Assembly, Panel (Superseded by NASM-3498)
- MS-35489 - GGrommets, Synthetic and Silicone Rubber, Hot-Oil and Coolant Resistant
- MS-35490 - Grommet, Rubber-Split, General Purpose (Use MS-35489)
- MS-35914 - Insert, Screw Thread - Thread Cutting
- MS-51830 - Insert, Screw - Thread, Locked in, Key-Locked, Miniature and Lightweight
- MS-51831 - Insert, Screw-Thread, Locked in, Key Locked, Heavy Duty
- MS-51832 - Insert, Screw-Thread, Locked In, Key-Locked, Extra Heavy Duty
- MS-51836 - Insert, Screw Thread - Thread Forming
- MS-51991 - Insert, Screw Thread-Locked in, Ring Locked, Serrated
- MS-51993 - Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
- MS-52120 - Grommet, Rubber (Usuperseded by ZZ-V-25)
- MS-63033 - Eyelets, Metallic, Rolled Deep Flange, With Washer, Style a (Superseded by MIL-E-20652/1)
- MS-63034 - Eyelet, Metallic, Rolled Shallow Flange, With Washer, Style B (Superseded by MIL-E-20652/1)
- MS-90707 - Ring, Retaining, External Grip
- MS-90708 - Ring, Retaining, External Interlocking
- NAS-1368 - Grommet, Plastic Flip Type
- NAS-1453 - Eyelet, Metallic, Electrical, Printed Circuit Board, Funnel Type
- NAS-1554 - Grommet, Ptfe, Split
- NAS-1684 - Eyelet, Metallic, Electrical, Flat Flanged Type
- NAS-1699 - Fastener - Blind, Internal Threaded, External Sleeve, General Purpose, Protruding Head, Self Locking
- NAS-1723 - Eyelet, Metallic, Electrical, Rolled Flanged Type
- NAS-1788 - Eyelet, Metallic, Electrical, Rolled Flanged Type
- NAS-1833 - Insert, Molded in, Threaded, Self-Locking, NONSELF-Locking, Sandwich Panel
- NAS-1834 - Insert, Molded in, Csk and Thru Clearance Hole, Sandwich Panel
- NAS-1835 - Insert, Molded in, Blind Threaded, Locking, Nonlocking, Floating, Sandwich Panel
- NAS-1836 - Insert, Molded in, Blind Threaded, Self-Locking, NONSELF-Locking, Lightweight, Sandwich Panel
- NAS-1940 - Grommet, Nonmetallic
- NAS-4445 - Nut, Crimp, for Crimplock Fastener System
- NAS-557 - Grommet, Plastic, Split
- NAS-573 - Clamp Assembly, Electronic Equipment
- NAS-67 - Guide, Fastener, Low Form, Cowl, Dzus Type
- NASM-122076 - 122115 - Insert, Cres, Helical Coil, Coarse Thread, 1 Dia Nominal Length
- NASM-122116-122155 - Insert, Cres, Helical Coil, Coarse Thread, 1-1/2 Dia Nominal Length
- NASM-122156-122195 - Insert, Cres, Helical Coil, Coarse Thread, 2 Dia Nominal Length
- NASM-122196-122235 - Insert, Cres, Helical Coil, Coarse Thread, 2-1/2 Dia Nominal Length
- NASM-122236 - 122275 - Insert, Cres Helical Coil Coarse Thread, 3 Dia Nominal Length
- NASM-124651-124690 - Insert, Cres, Helical Coil, Fine Thread, 1 Dia Nominal Length
- NASM-124691 - 124730 - Insert, Cres, Helical Coil, Fine Thread 1-1/2 Dia Nominal Length
- NASM-124731-124770 - Insert, Cres Helical Coil Fine Thread, 2 Dia Nominal Length
- NASM-124771 - 124810 - Insert, Cres, Helical Coil Fine Thread, 2-1/2 Dia Nominal Length
- NASM-124811 - 124850 - Insert, Cres, Helical Coil Fine Thread, 3 Dia Nominal Length
- NASM-16491 - Grommet, Metallic, General Specification For
- NASM-16491/1 - Grommet, Metallic, Plain, With Toothed Washer, Type Ii
- NASM-16491/2 - Grommet, Metallic, Oblong, With Flat Washer (Type Iv)
- NASM-16491/3 - Grommet, Metallic, Oblong, With Raised Washer, Type V
- NASM-17731 - Fastener, Rotary, Quick-Operating, Flush Head, Floating Type, 2,210 Lbf Min Tensile Strength
- NASM-17732 - Fastener, Rotary, Quick-Operating, Protruding Head, Floating Type, 2,210 Lbf Min Tensile Strength
- NASM-20230 - Grommet, Metallic, Plain and Rolled Rim, With Washer, Type I and Type Iii
- NASM-20652 - Eyelets, Metallic, and Eyelet Washers, Metallic
- NASM-20652/1 - Eyelets, Metallic, Rolled Flange Type, and Eyelet Washer
- NASM-21209 - Insert, Screw Thread, Coarse and Fine, Screw Locking, Helical Coil, Cres
- NASM-21266 - Grommet, Plastic, Edging
- NASM-21323 - Stud, Style I, Snapslide Fastener
- NASM-21325 - Stud, Style Iii, Snapslide Fastener
- NASM-21326 - Stud, Style Iv, Snapslide Fastener
- NASM-21327 - Fastener Installation, Snapslide
- NASM-21332 - Fastener, Snapslide
- NASM-22529 - Grommet, Edging
- NASM-22529/1 - Grommet, Composite, Edging
- NASM-22529/2 - Grommet, Cushion Composite, Edging
- NASM-229 - Fasteners, Interlocking Slide
- NASM-22978 - Fastener, Rotary, Quick-Operating, High-Strength
- NASM-25420 - Fasteners, Straight, Headed, Swaged Collar, Limitations for Use Of
- NASM-27980 - Fasteners, Snap, Style 2 (Regular Wire Spring Clamp Type)
- NASM-27981 - Fasteners, Snap Style 2a, Small Wire Spring, Clamp Type
- NASM-27983 - Fasteners, Snap, Style 4 (Three Way Locking Type)
- NASM-27984 - Fasteners, Snap, Style 5 (Scalloped Button Head Type)
- NASM-27986 - Fasteners, Snap, Style 7, Rivet Type
- NASM-3036 - Grommets, Rubber, Hot-Oil and Coolant Resistant
- NASM-33537 - Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for
- NASM-3498 - Screw Assembly, Panel
- NASM-5591 - Fasteners, Panel, Nonstructural
- NASM-8846 - Insert, Screw-Thread, Helical Coil
- QPL-22529 - Grommet, Plastic (No Superseding Document)
- QPL-22978 - Fastener, Rotary, Quick-Operating, High Strength (No Superseding Document)
- QPL-5591 - Fasteners, Panel (No Superseding Document)
- QPL-8490 - Fastener, Case, for Equipment Rack System in Aircraft
- V-F-106 - Fastener, Slide, Interlocking