FSC 5320: Rivets
The following documents are a part of this series:- A-A-59425 - Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Domed Head, Aluminum Alloy, Carbon Steel, Corrosion Resistant Steel
- A-A-59426 - Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Domed Head, Nickel-Copper Alloy
- A-A-59427 - Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Large Domed Head, Aluminum Alloy, Carbon Steel
- A-A-59428 - Rivets, Blind, Nonstructural, Retained Mandrel, Open End, 100 Degree Countersunk Head, Aluminum Alloy
- A-A-59429 - Rivets, Blind, Nonstructural, Retained Mandrel, Open End, 120 Degree Countersunk Head, Aluminum Alloy, Carbon Steel, Nickel-Copper Alloy
- A-A-59430 - Rivets, Blind, Nonstructural, Retained Mandrel, Closed-End, Domed Head, Aluminum Alloy
- A-A-59431 - Rivets, Blind, Nonstructural, Retained Mandrel, Closed-End, 120 Degrees Countersunk Head, Aluminum Alloy
- AMS-7228 - Rivets, Steel-Corrosion Resistant 18cr 9ni Solution Heat Treated (Cancelled Oct 1990) Replaced by AS-7228
- AMS-7229 - Rivet, Steel, Corrosion & Heat Resistant 18Cr-10.5NI-0.70(Cb+Ta) +Superseded By as-7229, 1990/93
- AMS-7232 - Rivets, Alloy, Corrosion & Heat Resistant 74NI-15.5Cr-8.0Fe+Superseded By as-7232, 1990
- AMS-7233 - Rivets, Solid, Alloy, Corrosion Resistant 67N +Cancelled, 1991, Superseded By as-7233
- AMS-7235 - Rivets, Steel, Corrosion and Heat Resistant 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V 1650°F (900°C) Solution Heat Treated and Partially Precipitation Heat Treated (Cancelled Oct 1990)
- AMS-7236 - Rivets, Corrosion & Heat Resistant Alloy, 52Co-20Cr-10NI-15W+Superseded By as-7236, 1990
- AMS-7237 - Rivets, Corrosion & Heat Resistant Alloy, 47.5NI-22Cr-Etc...+Superseded By as-7237, 1990
- AN-123151 - 123300 - Rivet - Universal Head, High Temperature, AMS-7229
- AN-123301 - 123450 - Rivet - Solid, Universal Head, AMS-7232
- AN-123451 - 123600 - Rivet - Countersunk Head, High Temperature, AMS 7229
- AN-123601 - 123750 - Rivet - Countersunk Head, High Temperature, AMS-7232
- AN-124951 - 125100 - Rivet - 100 Countersunk Head Corrosion Resistant Steel
- AN-125401 - 125550 - Rivet - Universal Head, Corrosion Resistant Steel
- AN-125551 - 125700 - Rivet - Universal Head, Mild Steel
- AN-420 - Rivet - Countersunk Head (See an-427)
- AN-425 - Ms Fitting Classification of Defects Of
- AN-426 - Rivet - Solid, Countersunk 100 Deg. Precision Head, Aluminum Alloy (Use ms-20426)
- AN-435 - Rivet, Round Head, Steel, Monel and Copper, (Cancelled Use Ms 20613 and Ms 20615)
- AN-441 - Rivet - Flat Head 'Mild Steel, Monel and Copper' (Use an-435)
- AN-450 - Rivet, Tubular (Use Ms 16535 and ms-16536)
- AN-458 - Rivet - 100 Deg. Countersunk Head, Blind, Type a (Supersededby ms-20603)
- AN-459 - Rivet - Brazier Head, Blind, Type a (Superseded by ms-20602)
- AN-460 - Rivet - 100 Deg. Countersunk Head, Blind, Type B, Class 1 (Inactive After 31 Dec 68)
- AN-461 - Rivet - Brazier Head, Blind, Type B, Class 1 (Inactive After 31 Dec 68) (Use NAS-1398)
- AN-462 - Rivet - 100 Deg. Countersunk Head, Blind, Type B, Class 2
- AN-463 - Rivet - Brazier Head, Blind, Type B, Glass 2 (Superseded by ms-20600)
- AN-470 - Rivet - Univeral Head, Aluminum Alloy (Use ms-20470)
- AS-123151 - 123300 - Rivet, Universal Head, High Temperature, 347 Cres UNS S34700
- AS-123301 - 123450 - Rivet, Solid, Universal Head, Nickel Alloy UNS N06600
- AS-123451 - 123600 - Rivet, Solid, 100 Deg Flush Head, High Temperature, 347 Cres, UNS S34700
- AS-123601 - 123750 - Rivet, Solid, 100 Deg Flush Head, Nickel Alloy UNS N06600
- AS-124951 - 125100 - Rivet - 100 Deg Countersunk Head, Corrosion Resistant Steel
- AS-125401 - 125550 - Rivet - Universal Head, Corrosion Resistant Steel
- AS-125551 - 125700 - Rivet - Universal Head, Mild Steel (STABILIZED Feb 2012)
- AS-3228 - Rivet - Tubular, Countersunk, AS7228
- AS-3230 - Rivet - Tubular, Countersunk, Corrosion and Heat Resistant Nickel Alloy (Uns N06600)
- AS-3231 - Rivet - Tubular, Universal, AS7232
- AS-7220 - Aluminum Rivets, UNS A91100, 99Al (1100-H14)
- AS-7222 - Aluminum Rivets, UNS A92117, 2.5Cu - 0.3Mg (2117-T4), Procurement Specification
- AS-7225 - Rivets, Carbon Steel Procurement Specification for
- AS-7228 - Rivets, Steel, Corrosion Resistant 18Cr-9Ni Solution Heat Treated Procurement Specification For
- AS-7232 - Rivets, Solid and Tubular, Nickel Alloy Corrosion and Heat Resistant 74Ni 15.5Cr 8.0Fe Procurement Specification For
- AS-7233 - Rivets, Solid, Uns N04400, Corrosion Resistant 67NI 31CU Procurement Specification For
- AS-7235 - Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification For
- AS-7237 - Rivets, Nickel Alloy, Corrosion and Heat Resistant, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, Solution Heat Treated Procurement Specification For
- AS-9403 - Rivet, Solid - Universal Head, Ams 5737
- AS-9460 - Rivet, Solid - 100Md Flush Head, Ams 7235
- DS-51403 - Rivet, Tubular, Round and Flat Type Head, Metric
- DS-51404 - Rivet, Solid, Universal Head, Brass, Metric
- DS-51405 - Rivet, Solid, Universal Head, Carbon Steel, Metric
- DS-51406 - Rivet, Solid, Countersunk 100 Degree Precision Head, Carbon Steel, Metric
- DS-51407 - Rivet, Solid, Universal Head, Copper, Metric
- DS-51408 - Rivet, Solid, Countersunk 100 Deg. Precision Head, Copper, Metric
- FF-B-571 - Bolt, Nuts, Studs, and Tap Rivets +Canc,S/Sby FF-B-575,FF-B-584, FF-N-836 & FF-S-1362
- FF-R-556 - Rivet, Solid, Small; Rivet, Splt, Small; Rivet Tubular, Small; Flat Washer (Burr), & C
- JAN-R-1127 - Rivets, Belt, Copper, and Burrs, Copper (Superseded by MIL-R-2583a)
- MA-3574 - Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric
- MIL-C-7885/7 - Rivets, Blind, Structural, 100 Deg. Flush Head, 5056 Al Alloy Sleeve, Mechanically Loc
- MIL-DTL-24243 - Rivets, Blind, Nonstructural, Retained Mandrel, General Specification for
- MIL-DTL-7885/11 - Rivets, Blind, Structural, Universal, Protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle (Type I, Style A, Class 1) (Superseded by NAS-9301)
- MIL-DTL-7885/12 - Rivets, Blind, Structural, 100 Degree Flush Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, (Type I, Style A, Class 2) (Superseded by NAS-9302)
- MIL-DTL-7885/13 - Rivets, Blind, Structural, 100 Degree Flush Shear Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, (Type I, Style A, Class 3) (Superseded by NAS-9303)
- MIL-DTL-7885/14 - Rivets, Blind, Structural, Universal Protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 1) (Superseded by NAS-9304)
- MIL-DTL-7885/15 - Rivets, Blind, Structural, 100 Degree Flush Head, 5056 AL Alloy Sleeve, Oversize Diameter (Type I, Style B, Class 2) (Superseded by NAS-9305)
- MIL-DTL-7885/16 - Rivets, Blind, Structural, Flanged Dome Head 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 4) (Superseded by NAS-9306)
- MIL-DTL-7885/17 - Rivets, Blind, Structural, Universal Protruding Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle (Type I, Style A, Class 1) (Superseded by NAS-9307)
- MIL-DTL-7885/18 - Rivets, Blind, Structural, 100 Degree Flush Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle, (Type I, Style A, Class 2) (Superseded by NAS-9308)
- MIL-DTL-7885/19 - Rivets, Blind, Structural, 100 Degree Flush Shear Head, Nickel-Copper Alloy Sleeve, Mechanically Locked Cres Spindle, (Type I, Style A, Class 3) (Superseded by NAS-9309)
- MIL-DTL-7885/2 - Rivets, Blind, Structural, Universal Protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked Alloy Steel Spindle (Type I, Style A, Class 1) (Superseded by NAS-9301)
- MIL-DTL-7885/20 - Rivets, Blind, Structural, 100 Degree Flush Shear Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle, (Type I, Style A, Class 3) (Superseded by NAS-9309)
- MIL-DTL-7885/21 - Rivets, Blind, Structural, Universal Protruding Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 1) (Superseded by NAS-9310)
- MIL-DTL-7885/22 - Rivets, Blind, Structural, Universal Protruding Head, INCO 600 Sleeve, Mechanically Locked INCO X-750 Spindle Oversize Diameter (Type I, Style B, Class 1) (Superseded by NAS-9310)
- MIL-DTL-7885/23 - Rivets, Blind, Structural, 100 Degree Flush Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 2) (Superseded by NAS-9311)
- MIL-DTL-7885/24 - Rivets, Blind, Structural, 100 Degree Flush Head, INCO 600 Sleeve, Mechanically Locked INCO X-750 Spindle, Oversize Diameter (Type I, Style B, Class 2) (Superseded by NAS-9311)
- MIL-DTL-7885/25 - Rivets, Blind, Structural, Flanged Dome Head, Nickel-Copper Alloy Sleeve, Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 4) (Superseded by NAS-9312)
- MIL-DTL-7885/26 - Rivets, Blind, Structural, Flanged Dome Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 4) (Superseded by NAS-9312)
- MIL-DTL-7885/27 - Rivets, Blind, Structural, 100 Degree Flush Shear Head, 5056 AL Alloy Steel Spindle, (Type I, Style A, Class 3) (Superseded by NAS-9303)
- MIL-DTL-7885/28 - Rivets, Blind, Structural, Flanged Dome Head, 5056 AL Alloy Sleeve, Mechanically Locked 8740 Alloy Steel Spindle, Oversize Diameter (Type I, Style B, Class 4) (Superseded by NAS-9306)
- MIL-DTL-7885/4 - Rivets, Blind, Structural, Universal Protruding Head, Nickel-Copper Alloy Sleeve, Mechanically Locked 15-7PH CRES Spindle (Type I, Style A, Class 1) (Superseded by NAS-9307)
- MIL-DTL-7885/6 - Rivets, Blind, Structural, Universal protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked 8740 Alloy Steel Spindle Oversize Diameter (Type I, Style B, Class 1) (Superseded by NAS-9304)
- MIL-DTL-7885/8 - Rivets, Blind, Structural, Universal Protruding Head, Nickel-Copper Alloy Sleeve, Mechanically Locked 15-7PH CRES Spindle Oversize Diameter(Type I, Style B, Class 1) (Superseded by NAS-9310)
- MIL-F-81177 - Fastener, Blind, High Strength, Installation Formed, Alloy Steel, General Specification for (Superseded by NASM-81177)
- MIL-F-81177/1 - Fastener, Blind, High Strength, Installation Formed, Alloy Steel, Design and Usage Limitations for (Superseded by NASM-81177/1)
- MIL-F-81177/2 - Fastener, Blind, High Strength, Installation Formed, Threaded, Self Locking, 100 Deg. Flush Head, 450 Deg. F, Alloy Steel 112 Ksi Fsu (Superseded by NASM-81177/2)
- MIL-F-81177/3 - Fastener, Blind, High Strength, Installation Formed, Threaded, Self Locking, Protruding Head, 450 Deg. F, Alloy Steel, 112 Ksi, Fsu (Superseded by NASM-81177/3)
- MIL-F-81177/COMPLETE - Complete Set of Slash Sheets.
- MIL-F-8975 - Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant Steel, Heat Resistant Steel and Titanium, General Specification for (Superseded by Nasm8975)
- MIL-F-8975/1 - Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant and Heat Resistant Steel and Titanium, Design and Usage Limitations for (Superseded by Nasm8975/1)
- MIL-F-8975/2 - Fastener, Blind, High Strength, Corrosion Resistant and Heat Resistant Steel, Flush Head, Type Ii, Class I (Superseded by Nasm8975/2)
- MIL-F-8975/3 - Fasteners, Blind, Titanium, Flush Head, Type Ii, Class 2 (Superseded by Nasm8975/3)
- MIL-F-8975/4 - Fasteners, Blind, High Strength, Corrosion Resistant and Heat Resistant Steel, Protruding Head, Type Ii, Class 1 (Superseded by Nasm8975/4)
- MIL-F-8975/5 - Fastener, Blind, Titanium, Protruding Head, Type Ii, Class 2 (Superseded by Nasm8975/5)
- MIL-F-8975/6 - Fasteners, Blind, High Strength, Titanium/Cres, Protruding Head, Type I, Class 2 (Superseded by Nasm8975/6)
- MIL-F-8975/7 - Fasteners, Blind, High Strength, Titanium/Cres, Flush Head, Type I, Class 2 (Superseded by Nasm8975/7)
- MIL-HDBK-271/102 - Aircraft Fasteners Installation & Removal Methods for MS14218 120 Deg. Rivets
- MIL-P-23469 - Pin-Rivet, Grooved and Collar, Grooved Pin-Rivet, Swage-Locked (Lockpin) General Specification For
- MIL-P-23469/1 - Pins and Collars, Swage-Locking, Regular Height, Flanged and Low Profile, Aluminum Alloy, Corrosion Resistant Steel, Carbon Steel and Alloy Steel
- MIL-P-23469/10 - Pin, Swage-Locking, Flat Head, 90 Deg. Countersunk, Four Locking Groove, Aluminum Alloy, Corrosion Resistant Steel and Carbon Steel, Cadimum Coated (Superseded by MIL-P-23469/6)
- MIL-P-23469/11 - Pin, Swage-Locking, Oval Head, 60 Deg. Countersunk, Four Locking Groove, Carbon Steel (Use MIL-P-23469/7)
- MIL-P-23469/2 - Pin-Rivet, Grooved, Brazier Head; Straight Shank, Six Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels
- MIL-P-23469/3 - Pin-Rivet, Grooved, Brazier, Truss and Flush Head; Straight Shank, Wide Grip Range, Multiple Locking Grooves, Aluminum Alloy and Carbon Steel (No Superseding Document)
- MIL-P-23469/4 - Pin-Rivet, Grooved, Round Head; Straight Shank, Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels
- MIL-P-23469/5 - Pin-Rivet, Grooved, Truss Head; Straight Shank, Six Locking Grooves and Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels
- MIL-P-23469/6 - Pin-Rivet, Grooved, Flat 90 Deg. Countersunk Head; Straight Shank, Six Locking Grooves and Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels
- MIL-P-23469/7 - Pin-Rivet, Grooved, Oval 60 DEG. Countersunk Head; Tapered-Section Shank, Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant Steel and Carbon Steels
- MIL-P-23469/8 - Pin, Swage-Locking, Brazier Head, Four Locking Groove, Aluminum Alloy, Corrosion Resistant Steel and Carbon Steel, Cadmiun Coated (Superseded by MIL-P-23469/2)
- MIL-P-23469/9 - Pin, Swage Locking, Button Head, Four Locking Groove, Aluminum Alloy, Corrosion Resistant Steel and Carbon Steel, Cadmium Coated (Superseded by MIL-P-23469/4)
- MIL-P-23470/10 - Pin-Rivet, Threaded, Button Head, Straight Shank, Corrosion Resistant Steel (No Superseding Document)
- MIL-P-23470/11 - Pin Rivet, Threaded, 60 Deg. Countersunk Oval Head, Straight Shank, Corrosion Resistant Steel (No Superseding Document)
- MIL-P-23470/12 - Pin-Rivet, Threaded, 60 Degrees Countersunk Oval Head, Tapered Shank, Corrosion Resistant Steel (No Superseding Document)
- MIL-P-23470/13 - Pin Rivet, Threaded, 90 Deg. Countersunk Flat Head, Straight Shank, Aluminum Alloy (No Superseding Document)
- MIL-P-23470/15 - Pin Rivet, Threaded, Button Head, Tapered Shank Aluminum Alloy (No Superseding Document)
- MIL-P-23470/16 - Pin Rivet, Threaded, 60 Degrees Counter Sunk Oval Head, Straight Shank, Aluminum Ally (No Superseding Document)
- MIL-P-23470/17 - Pin Rivet, Threaded, 60 Deg. Countersunk Oval Head, Tapered Shank, Aluminum Alloy (No Superseding Document)
- MIL-P-23470/18 - Pin-Rivet Collar, Threaded, Torque-Off, Self-Locking, Carbon Steel (No Superseding Document)
- MIL-P-23470/19 - Pin Rivet Collar, Threaded, Torque Off, Self Locking Carbon Steel (Double Hex) (No Superseding Document)
- MIL-P-23470/2 - Pin Rivet, Threaded, Button Had, Taper Ed Shank, Corrosion Resistant Steel (No Superseding Document)
- MIL-P-23470/20 - Pin-Rivet Collar, Threaded, Torque-Off, Self-Locking Corrosion Resistant Steel (No Superseding Document)
- MIL-P-23470/21 - Pin Rivet Collar, Threaded, Torque Off, Self Locking, Corrosion Resistant Steel (Double Hex) (No Superseding Document)
- MIL-P-23470/22 - Pin-Rivet Collar, Threaded, Torque-Off, Self Locking, Aluminum Alloy (No Superseding Document)
- MIL-P-23470/23 - Pin Rivet Collar, Theaded, Torque Off, Self Locking, Aluminum Alloy (Double Hex) (No Superseding Document)
- MIL-P-23470/3 - Pin-Rivet, Threaded, Nail Head, Straight Shank Corrosion Resistant Steel
- MIL-P-23470/4 - Pin-Rivet, Threaded, 90 Degrees Countersunk, Flat Head, Straight Shank, Carbon Steel
- MIL-P-23470/5 - Pin Rivet, Threaded, Button Head, Straight Shank, Carbon Steel
- MIL-P-23470/6 - Pin Rivet, Threaded, Button Head, Tapered Shank, Carbon Steel
- MIL-P-23470/7 - Pin-Rivet, Threaded, 60 Degrees Countersunk Oval Head Straight Shank, Carbon Steel (No Superseding Document)
- MIL-P-23470/8 - Pin-Rivet, Threaded 60 Degrees Countersunk Oval Head, Tapered Shank, Carbon Steel (No Superseding Document)
- MIL-P-23470/9 - Pin Rivet, Threaded, 90 Deg. Countersunk Flat Head, Straight Shank, Corrosion Resistant Steel
- MIL-P-87988 - Pin-Rivet, Threaded With Hex Socket General Specification for (No Superseding Document)
- MIL-P-87988/1 - Pin-Rivet, Threaded, Type VI (Protruding Shear Head), Class 1 (7075 Aluminum, 45 Ksi Fsu and 75 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/10 - Pin-Rivet, Threaded, Type V (100 Deg. Flush Ms24694 Tension Head), Class 2 (6al-4V Titanium, 95 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/11 - Pin-Rivet, Threaded, Type Ii (100 Deg. Flush Reduced Shear Head), Class 2 (6al-4V Titanium, 95 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/12 - Pin-Rivet, Threaded, Type Iii (100 Deg. Flush Crown Shear Head), Class 2 (6al-4V Titanium, 95 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/13 - Pin-Rivet, Threaded, Type VI (100 Deg. Flush Ms20426 Shear Head) Class 2 (6al-4V Titanium, 95 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/14 - Pin-Rivet, Threaded, Type Ii (100 Deg. Flush Reduced Shear Head, Class 4 (A-286 High Temperature Alloy, 95-115 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/15 - Pin-Rivet, Threaded, Type I (Protruding Tension Head), Class 4 (A-286 High Temperature Alloy, 95-115 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/16 - Pin-Rivet, Threaded, Type V (100 Deg. Flush Ms24694 Tension Head), Class 4 (A-286 High Temperature Alloy, 95-115 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/17 - Pin-Rivet, Threaded, Type Iii (100 Deg. Flush Crown Shear Head), Class 4 (A-286 High Temperature Alloy, 95-115 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/18 - Pin-Rivet, Threaded, Type Iv (100 Deg. Flush Ms20426 Shear Head, Class 4 (A-286 High Temperature Alloy, 95-115 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/19 - Pin-Rivet, Threaded, Type Ii (100 Deg. Flush Reduced Shear Head, Class 5 (Alloy Steel, 108 Ksi Fsu and 180-200 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/2 - Pin-Rivet, Threaded, Type Iv (100 Deg. Flush Ms20426 Shear Head), Class 1 (7075 Aluminum, 45 Ksi Fsu and 75 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/20 - Pin-Rivet, Threaded, Type Iv (100 Deg. Flush Ms20426 Shear Head), Class 5 (Alloy Steel, 108 Ksi Fsu and 180-200 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/21 - Pin-Rivet, Threaded, Type Iii (100 Deg. Flush Crown Shear Head), Class 5 (Alloy Steel, 108 Ksi Fsu and 180-120 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/22 - Pin-Rivet, Threaded, Type V (100 Deg. Flush Ms24694 Tension Head), Class 5 (Alloy Steel, 108 Ksi Fsu and 180-200 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/23 - Pin-Rivet, Threaded, Type I (100 Degree (Protruding Tension Head), Class 5 (Alloy Steel, 108 Ksi Fsu and 180-200 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/24 - Pin-Rivet, Threaded, Type V (100 Degree Flush Ms24694 Tension Head), Class 6 (Ph13-8 Mo Corrosion Resistant Steel, 125 Ksi Fsu and 220 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/25 - Pin-Rivet, Threaded, Type Iii (100 Deg. Flush Crown Shear Head), Class 6 (Ph13-8 Mo Corrosion Resistant Steel, 125 Ksi Fsu and 220 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/26 - Pin-Rivet, Threaded, Type I (Protruding Tension Head), Class 6 (Ph13-8 Mo Corrosion Resistant Steel, 125 Ksi Fsu and 220 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/27 - Pin-Rivet, Threaded, Type Iv (100 Deg. Flush Ms20406 Shear Head, Class 6 (Ph13-8 Mo Corrosion Resistant Steel, 125 Ksi Fsu and 220 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/28 - Pin-Rivet, Threaded, Type Ii (100 Deg. Flush Reduced Shear Head), Class 6 (Ph13-8 Mo Corrosion Resistant Steel, 125 Ksi Fsu and 220 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/3 - Pin-Rivet, Threaded, Type V (100 Deg. Flush Ms24694 Tension Head), Class 1 (7075 Aluminum, 45 Ksi Fsu and 75 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/4 - Pin-Rivet, Threaded, Type Iv (100 Deg. Flush Ms20426 Shear Head), Class 3 (Alloy Steel, 95 Ksi Fsu and 160-180 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/5 - Pin-Rivet, Threaded, Type I (Protruding Tension Head), Class 3 (Alloy Steel, 95 Ksi Fsu and 160-180 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/6 - Pin-Rivet, Threaded, Type V (100 Deg. Flush Ms24694 Tension Head), Class 3 (Alloy Steel, 95 Ksi Fsu and 160-180 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/7 - Pin-Rivet, Threaded, Type Ii (100 Deg. Flush Reduced Shear Head), Class 3 (Alloy Steel, 95 Ksi Fsu and 160-180 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/8 - Pin-Rivet, Threaded, Type Iii (100 Deg. Flush Crown Shear Head), Class 3 (Alloy Steel, 95 Ksi Fsu and 160-180 Ksi Ftu) (No Superseding Document)
- MIL-P-87988/9 - Pin-Rivet, Threaded, Type I (Protruding Tension Head), Class 2 (6al-4V Titanium, 95 Ksi Fsu and 160 Ksi Ftu) (No Superseding Document)
- MIL-R-1150 - Rivet, Solid (Aluminum Alloy), and Aluminum Alloy Rivet Wire and Rod (Use MIL-R-5674)
- MIL-R-1166 - Rivets for Sheet-Metal Works (Use FF-R-556a)
- MIL-R-12221 - Rivet, Solid, Aluminum Alloy, Grade 7277, Tempered
- MIL-R-1223 - Rivet and Rivet Steel Bars (No Superseding Document)
- MIL-R-16503 - Rivet Rods and Rivets, Steel (for Torpedo Construction)
- MIL-R-16759 - Rivets, Brass and Copper (for Torpedo Construction)
- MIL-R-24243 - Rivets, Blind, Nonstructural, Retained Mandrel, General Specification For
- MIL-R-24243/1 - Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Domed Head, Aluminum Alloy, Carbon Steel, Corrosion Resistant Steel
- MIL-R-24243/10 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, Domed Head, Aluminum Alloy
- MIL-R-24243/2 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, Domed Head, Nickel-Copper Alloy
- MIL-R-24243/3 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, Large Domed Head, Aluminum Alloy, Carbon Steel
- MIL-R-24243/4 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, 100 Deg. Countersunk Head, Aluminum Alloy
- MIL-R-24243/5 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, 120 Deg. Countersunk Head, Aluminum Alloy, Carbon Steel, Nickel-Copper Alloy
- MIL-R-24243/6 - Rivets, Blind, Nonstructural, Retained Mandrel, Closed-End, Domed Head, Aluminum Alloy
- MIL-R-24243/7 - Rivets, Blind, Nonstructural, Retained Mandrel, Closed-End, 120 Deg. Countersunk Head, Aluminum Alloy
- MIL-R-24243/8 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, Snap Head, Aluminum Alloy
- MIL-R-24243/9 - Rivets, Blind, Nonstructural, Retained Mandrel, Open-End, 120 Deg. Countersunk Head, Aluminum Alloy
- MIL-R-2582 - Rivet, Tubular and Cap
- MIL-R-2583 - Rivet, Solid, Belt, and Washers, Flat (Burrs) (Use FF-R-556)
- MIL-R-27384 - Rivet, Blind, Drive Type (Superseded by NASM-27384)
- MIL-R-2890 - Rivets and Tap-Rivets, Nonferrous, for Hull Construction
- MIL-R-47195 - Rivets, Blind, Self-Plugging Preparation for and Installation of (Superseded by NASM-47195)
- MIL-R-47196 - Rivets, Buck Type, Preparation for and Installation of (Superseded by NASM-47196)
- MIL-R-5674 - Rivets, Structural, Aluminum Alloy, Titanium Columbium Alloy, General Specification for (Superseded by Nasm5674)
- MIL-R-7885 - Rivets, Blind, Structural, Mechanically Locked Spindle and Friction Locked Spindle, General Specification For
- MIL-R-7885/10 - Rivet, Blind, Structural, Universal Protruding Head, Multi-Grip, Mechanically Locked (Type I, Style a, Class 1) (No Superseding Document)
- MIL-R-7885/2 - Rivets, Blind, Structural, Universal Protruding Head,5056 Alalloy Sleeve, Mechanically
- MIL-R-7885/3 - Rivets, Blind, Structural, 100 Deg. Flush Head, 5056 Al Alloy Sleeve, Mechanically Locked Alloy Steel Spindle (Type I, Style a, Class 2) (Superseded by NAS9302)
- MIL-R-7885/4 - Rivets, Blind, Structural, Universal Protruding Head, Monel Sleeve, Positive Locked 15
- MIL-R-7885/5 - Rivets, Blind, Strucyural, 100 Degrees Flush Head, Nickel-Copper Alloy Sleeve, Mechanically Locked 15-7PH CRES Spindle (Type I, Style A, Class 2) (SUPERSEDED BY NAS9308)
- MIL-R-7885/6 - Rivets, Blind, Structural, Universal Protruding Head, 5056 a1 All
- MIL-R-7885/7 - Rivets, Blind, Structural, 100 Deg. Flush Head, 5056 Al Alloy Sleeve, Mechanically Locked 8740 Alloy Steel Spindle, Oversize Diameter (Type I, Style B, Class 2) (Superseded by NAS9305)
- MIL-R-7885/8 - Rivets, Blind, Structural, Universal Protruding Head, Monel Sleeve, Positive Locked 15
- MIL-R-7885/9 - Rivets, Blind, Structural, 100 Deg. Flush Head, Nickel-Copper Alloy Sleeve, Mechanically Locked 15-7Ph Cres Spindle, Oversize Diameter (Type I, Style B, Class 2) (Superseded by NAS9311)
- MIL-R-83459 - Rivet, Titanium, Bimetal 95 Ksi Fsu, General Specification for (Superseded by NASM-83459)
- MIL-R-83459/1 - Rivet, Titanium, Bimetal, 95 Ksi Su, Protruding Head, Type 1 (Superseded by NASM-83459/1)
- MIL-R-83459/2 - Rivet, Titanium, Bimetal, 95 Ksi Fsu, 100 Deg. Tension Crown Head, Type Ii (Superseded by NASM-83459/2)
- MIL-R-83459/3 - Rivet, Titanium, Bimetal, 95 Ksi Fsu, 100 Deg. Reduced Flush Crown Head, Type Iii (Superseded by NASM-83459/3)
- MIL-R-8814 - Rivets, Blind, Nonstructural Type (Superseded by Nasm8814)
- MIL-STD-1759 - Rivets and Rivet Type Fasteners Preferred for Design, Listing of (No Superseding Document)
- MIL-STD-40007 - Rivets, Solid, Installation of (No Superseding Document)
- MS-14218 - Rivet, Solid, 120 Deg. Flush Interference Shear Head (Superseded by NASM-14218)
- MS-14219 - Rivet, Solid, 120 Deg. Flush Interference, Tension Type Head (Superseded by NASM-14219)
- MS-16535 - Rivet - Tubular, Oval Head (Superseded by NASM-16535)
- MS-16536 - Rivet - Tubular, 150 Deg. Flat Countersunk Head (Superseded by NASM-16536)
- MS-16593 - Rivet, Solid, 78 Degree Flat Head, Aluminum
- MS-17312 - Rivet for Safety Chain Type Ii, Class 6, No. O
- MS-202470 - Universal Head, Aluminum Alloy and Titanium Columbium Alloy
- MS-20426 - Rivet, Solid, Countersunk 100 Deg., Precision Head, Aluminum and Titanium Columbium Alloy (Superseded by NASM-20426)
- MS-20427 - Rivet, Solid-100 Deg. Countersunk Head, Carbon Steel, Corrosion-Resistant Steel, Monel and Copper (Superseded by NASM-20427)
- MS-20435 - Rivet, Round Head, Steel, Monel and Copper (Superseded by ms-20613 and ms-20615)
- MS-20450 - Rivet, Tubular (Superseded by ms-16535 or ms-16536)
- MS-20470 - Rivet, Solid Universal Head, Aluminum Alloy and Titanium Columbium Alloy (Superseded by NASM-20470)
- MS-20600 - Rivet, Blind, Structural Pull Stem, Self-Plugging, Protruding Head, Type Ii (Superseded by NASM-20600)
- MS-20601 - Rivet, Blind, Structural Pull Stem, Self-Plugging, 100 Deg. Flush Head, Type Ii (Superseded by NASM-20601)
- MS-20602 - Rivet, Blind, Chemically Expanded, Protruding Head, Type I, Class 1, Styles a and B (No Superseding Document)
- MS-20603 - Rivet, Blind, Chemically Expanded, 100 Degrees Flush Head, Type I, Class 2, Styles a and B ((No Superseding Document)
- MS-20604 - Rivet, Blind, Nonstructural, Universal Head, Class 1 (Superseded by NASM-20604)
- MS-20605 - Rivet, Blind, Nonstructural, 100 Deg. Flush Head, Class 2 (Superseded by NASM-20605)
- MS-20606 - Rivet, Blind, Nonstructural Modified Truss Head, Class 3 (Use ms-20604)
- MS-20613 - Rivet, Solid-Universal Head, Steel, Carbon and Steel, Corrosion-Resistant (Superseded by NASM-20613)
- MS-20615 - Rivet, Solid-Universal Head, Brass, Copper, Nickel-Copper Alloy (Superseded by NASM-20615)
- MS-21000 - Pin - Flathead, HI - Shear, Oversize, 160,000 PSI
- MS-21001 - Pin, 100 Deg. Countersunk Head, Hi-Shear, Oversize, 160,000 PSI
- MS-21140 - Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, 100 Deg. Flush Head, Corrosion Resisting Steel, 95 Ksi Fsu (Superseded by NASM-21140)
- MS-21141 - Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, Protruding Head, Corrosion Resisting Steel, 95 KSI FSU
- MS-21200 - Rivet-Blind Protruding Head Locked Spindle
- MS-21201 - Rivet-Blind, 100 Deg. Flush Head Locked Spindle
- MS-24661 - Rivet, Blind-Countersunk Head, Drive Type (Superseded by NASM-24661)
- MS-24662 - Rivet, Blind, Universal Head, Drive Type (Superseded by NASM-24662)
- MS-33522 - Rivets, Blind, Structural, Mechanically Locked and Friction Retainer Spindle, (Reliability and Maintainability) Design and Construction Requirements for (Superseded by NASM-33522)
- MS-33547 - Pins, Spring, Functional Limitations of (Superseded by NASM-33547)
- MS-33557 - Nonstructural Rivets for Blind Attachment; Limitations for Design and Usage (Superseded by NASM-33557)
- MS-35684 - Rivet, Split, Oval Head, Steel
- MS-35685 - Rivet, Split, Oval Head, Brass
- MS-35743 - Rivet, Solid, Small, Pan Head, Steel, Annealed
- MS-35744 - Rivet, Solid-Small Countersunk Head, Steel, Annealed
- MS-35745 - Rivet, Solid, Belt
- MS-51401 - Rivet, Solid, Tinners
- MS-51499 - Rivet, Tubular, 100 Degree, Countersunk Head
- MS-51829 - Rivet, Solid, Button Head, Steel
- MS-51924 - Cap, Rivet
- MS-51931 - Rivet, Solid - Tinner S
- MS-51942 - Rivet, Tubular - Flat Head
- MS-51945 - Rivet, Solid Countersunk Head Brass or Copper
- MS-90353 - Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, 100 Deg. Flush Head, Alloy Steel, 112 K.S.I. Fsu (Superseded by NASM-90353)
- MS-90354 - Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, Protruding Head, Alloy Steel, 112 K.S.I. Fsu (Superseded by NASM-90354)
- MS-9318 - Rivet, Solid-100 Deg. Flush Head, AMS 7233 (Superseded by SAE as-9318)
- MS-9319 - Rivet, Solid - Universal Head, AMS 7233 (Superseded by SAE as-9319)
- MS-9403 - Rivet, Solid - Universal Head, AMS 5737 (Superseded by SAE as-9403)
- MS-9460 - Rivet, Solid - 100 Deg. Flush Head, AMS 7235 (Superseded by SAE as-9460)
- NA-0051 - Rivet, Solid, Universal Head, a286 Cres, Metric
- NA-0052 - Rivet, Solid, Universal Head, Nickel-Copper, Metric
- NA-0053 - Rivet, Solid, Countersunk 100 Degrees Head, a286 Cres, Metric
- NA-0054 - Rivet, Solid, Countersunk 100 Degrees Head, Nickel-Copper, Metric
- NA-0055 - Rivet, Solid, Reduced Countersunk 100 Degrees Head, a286 Cres, Metric
- NA-0056 - Rivet, Solid, Reduced Countersunk 100 Degr Head, Nickel-Copper, Metric
- NA-0174 - Design Parameters for Head Form of Solid Rivets and 100 Degrees Reduced Head for Bolts, Metric
- NAS-1054 - Rivet, Protruding Head
- NAS-1055 - Rivet, 100 Degrees Flush Close Tolerance Head
- NAS-1080 - Collar, Swage Locking for Pull-Type and Stump-Type Lockbolts
- NAS-1097 - Rivet, Solid, 100 Degrees Flush Shear Head, Aluminum Alloy, Titanium Columbium Alloy
- NAS-1198 - Rivet, Solid, Universal Head, a286 Corrosion Resistant Steel
- NAS-1199 - Rivet, Solid, 100 Degrees Flush Head, a286 Corrosion Resistant Steel
- NAS-1200 - Rivet, Solid, 100 Degrees Flush Shear Head, a286 Corrosion Resistant Steel and Nickel-Copper
- NAS-1241 - Rivet, Solid, 100 Degrees Flush Head, Aluminum Alloy, Ms20426 Repair
- NAS-1321 - Rivet, Slug, Sleeveless
- NAS-1398 - Rivet, Blind, Protruding Head, Locked Spindle
- NAS-1399 - Rivet, Blind, 100 Degrees Flush Head, Locked Spindle
- NAS-1400 - Rivet, Blind, Self-Plugging, Mechanically Locked Spindle
- NAS-1413 - Pins and Collars, Swage Locking
- NAS-1414 THRU 1422 - Pin, Swage Locking, Steel, 100 Degrees Shear Head, Stump Type
- NAS-1424 THRU 1432 - Pin, Swage Locking, Steel, Protruding Head, Shear, Stump-Type
- NAS-1465 - Pin, Swag Locking, Steel, Standard and Oversize, Protrudinghead, +See NAS-1465 Thru 1
- NAS-1486 THRU 1492 - Pin, Swage Locking, Steel, 100° Head (Ms24694), Tension, Stump-Type
- NAS-1496 THRU 1502 - Pin, Swage Locking, Steel, Protruding Head, Tension, Stump Type
- NAS-1533 - Pin, 100 Deg Csk. Head Hi-Shear Rivet, Close Tolerance
- NAS-1555 THRU 1562 - Pin, Swage Locking, Aluminum Alloy, Protruding Head, Tension, Stump-Type
- NAS-1563 - Gages, Pins and Collar Inspection, Swage Locking
- NAS-1583 - Pin, 100 Degrees, Countersunk Head, Hi-Shear Rivet, Close Tolerance, 1200 Degrees F
- NAS-1584 - Pin, Flat Head, Hi-Shear Rivet, Close Tolerance, 1200 Degrees F
- NAS-1585 - Collar, Hi-Shear Rivet, 1200 Degrees F
- NAS-1590 - Pin, Hi-Shear Rivet, 1200 Deg F
- NAS-1669 - Fastener, Blind, Internally Threaded, External Sleeve, General Purpose, Protruding Head, Self-Locking
- NAS-1670 - Fastener, Blind, Internally-Threaded, External Sleeve, General Purpose, Flush Head, Se
- NAS-1671 - Fastener, Blind, Internally Threaded, External Sleeve, High Temperature, Protruding H
- NAS-1672 - Fastener, Blind, Internally Threaded, External Sleeve, High Temperature, Flush Head,
- NAS-1673 - Fastener, Blind, Internally Threaded, External Sleeve, Lightweight, Protruding Head, S
- NAS-1674 - Fastener, Blind, Internally Threaded, External Sleeve, Lightweight, Flush Head, Millab
- NAS-1675 - Fastener, Blind, Internally Threaded, External Sleeve, Self-Locking
- NAS-1686 - Rivet, Blind, Aluminum Sleeve, Mechanically Locked Spindle, Bulbed
- NAS-1687 - Rivet, Blind, Nickel-Copper and Nickel Alloy, Mechanically Locked Spindle, Bulbed
- NAS-1719 - Rivet, Blind, 100 Degrees Reduced Flush Head, (NAS1097 Head), Mechanically Locked Spindle
- NAS-1720 - Rivet, Blind, Protruding Head, Mechanically Locked Spindle
- NAS-1721 - Rivet, Blind, 100 Degrees Flush Head (Nasm20426 Head), Mechanically Locked Spindle
- NAS-1722 - Rivet, Blind, Self-Plugging, Mechanically Locked Spindle
- NAS-1724 - FASTENER, SHEAR, 100 Degrees STANDARD FLUSH HEAD, TAPERED SHANK (TS), 95 KSI Fsu, 108 KSI Fsu, 110 KSI Fsu, 125 KSI Fsu, 132 KSI Fsu, 156 KSI Fsu
- NAS-1725 - Fastener, Shear, 100 Degrees Standard Flush Head, Taperedshank (Ts), Oversize, 95 Ksi Fsu, 108 Ksi Fsu, 110 Ksi Fsu, 125 Ksi Fsu, 132 Ksi Fsu, and 156 Ksi Fsu
- NAS-1728 - FASTENER, SHEAR, PROTRUDING HEAD, TAPERED SHANK (TS), 95 KSI Fsu, 108 KSI Fsu, 110 KSI Fsu, 125 KSI Fsu, 132 KSI Fsu, and 156 KSI Fsu
- NAS-1729 - Fastener, Shear, Protruding Head, Tapered Shank (Ts), Oversize, 95 Ksi Fsu, 108 Ksi Fsu, 110 Ksi Fsu, 125 Ksi Fsu, 132 Ksi Fsu and 156 Ksi Fsu
- NAS-1730 - Fastener, Taper Shank
- NAS-1738 - Rivet, Blind, Protruding Head, Mechanically Locked Spindle, Bulbed
- NAS-1739 - Rivet, Blind, 100 Degrees Flush Head, Mechanically Locked Spindle, Bulbed
- NAS-1740 - Rivet, Blind, Self-Plugging, Mechanically Locked Spindle, Bulbed
- NAS-1750 - Fastener, Blind, Internally Threaded, External Sleeve, General Purpose, Flush Head, Se
- NAS-1751 - Fastener, Blind, Internally Threaded, External Sleeve, General Purpose, Protruding Hea
- NAS-1752 - Fastener, Blind, Internally Threaded, External Sleeve, High Temperature, Flush Head,
- NAS-1753 - Fastener, Blind, Internally Threaded, External Sleeve, High Temperature, Protruding H
- NAS-1754 - Fastener, Blind, Internally Threaded, External Sleeve, Lightweight, Flush Head, Millab
- NAS-1755 - Fastener, Blind, Internally Threaded, External Sleeve, Lightweight, Protruding Head Se
- NAS-1768 - Rivet, Blind, Protruding Head, Mechanically Locked Spindle, Bulbed
- NAS-1769 - Rivet, Blind, 100 Degrees Flush Head, Mechanically Locked Spindle, Bulbed, Oversize
- NAS-178 - Pin - Flat Head Hi-Shear Rivet
- NAS-1919 - Rivet, Blind, General Purpose, Bulbed, Protruding Head, Mechanically-Locked-Spindle
- NAS-1921 - Rivet, Blind, General Purpose, Bulbed, 100 Degrees Flush Head, Mechanically-Locked-Spindle
- NAS-2013 - Collar , Grooved, Pin-Rivet, Titanium, (Composite Applications)
- NAS-2014 - Pin, Rivet, Grooved, and Collar, for Composite Materials
- NAS-2015 THRU 2022 - Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- NAS-2025 THRU 2032 - Pin, Rivet, Grooved, Titanium, Composite Applications, 100 Degrees Flush Head, Pull-Type
- NAS-2035 THRU 2042 - Pin, Rivet, Grooved, Titanium (Composite Applications), 130 Degrees Flush Head, Pull-Type
- NAS-2045 THRU 2052 - Pin, Rivet, Grooved, Titanium, Composite Applications, Protruding Head, Stump-Type
- NAS-2055 THRU 2062 - Pin, Rivet, Grooved, Titanium, Composite Applications, 100 Degrees Flush Head, Stump Type
- NAS-2065 THRU 2072 - Pin, Rivet, Grooved, Titanium, Composite Applications, 130 Degrees Flush Head, Stump-Type
- NAS-2115 THRU 2122 - Bolt, Lock, Tension, 100 Degrees Head (Ms20426), Standard and Oversize, Pull-Type, Titanium Alloy
- NAS-2125 THRU 2132 - Bolt, Lock, Tension, 100 Degrees Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
- NAS-2605 THRU 2612 - Bolt, Lock, Shear, Protruding Head, Stump-Type, Titanium Alloy
- NAS-2705 THRU 2712 - Bolt, Lock, Shear, 100 Degrees Head, Stump-Type, Titanium Alloy
- NAS-4444 - Crimplock Fastener System
- NAS-5170 - Fastener-Blind, Internally Threaded, External Sleeve, Titanium, Flush Head, Self-Locking
- NAS-5171 - Fastener, Blind, Internally Threaded, External Sleeve, Titanium, Flush Head, Self-Locking, .016 Oversize
- NAS-525 - Rivet, 100 Deg. Countersunk Head Hi-Shear Close Tolerance Head & Shank
- NAS-5270 - Fastener, Blind, Internally Threaded, External Sleeve, Titanium, Protruding Head, Self-Locking
- NAS-5271 - Fastener, Blind, Internally Threaded, External Sleeve, Titanium, Protruding Head, Self-Locking, .016 Oversize
- NAS-528 - Collar (High Strength) High - Shear Rivet
- NAS-529 - Rivet, Flat Head, Hi Shear, Close Tolerance Shank
- NAS-6910 - Pin, Swage Locking, Ph13-8Mo Cres, 100 Deg Crown Head, Tension, Pull-Type
- NAS-6911 - Pin, Swage Locking, Ph13-8Mo Cres, 100 Deg Head, Shear, Stump-Type
- NAS-6912 - Pin, Swage Locking, Ph13-8Mo Cres, Protruding Head, Shear, Stump-Type
- NAS-6913 - Pin, Swage Locking, Ph13-8Mo Cres, 100 Deg Crown Head, Shear, Pull-Type
- NAS-6914 - Pin, Swage Locking, Ph13-8Mo Cres, Protruding Head, Shear, Pull-Type
- NAS-6915 THRU 6922 - Pin, Swage Locking, Aluminum Alloy, 100 Degrees Head (Ms20426), Tension, Stump-Type
- NAS-6925 THRU 6930 - Pin, Swage Locking, Steel, 100 Deg Head (ms- 20426), Tensions, Stump-Type
- NAS-6925 THRU 6932 - Pin, Swage Locking, Steel, 100 Degrees Head (Nasm20426), Tension, Stump-Type
- NAS-6946 THRU 6952 - Pin, Swage Locking, a286 Cres, 100 Degrees Head (Ms24694), Tension, Pull-Type
- NAS-6955 THRU 6962 - Pin, Swage Locking, a286 Cres, 100 Degrees Head (Ms20426), Tension, Pull-Type
- NAS-6965 THRU 6972 - Pin, Swage Locking, a286 Cres, Protruding Head, Tension, Pull-Type
- NAS-6974 THRU 6982 - Pin, Swage Locking, a286 Cres, 100 Degrees Shear Head, Stump-Type
- NAS-6984 THRU 6992 - Pin, Swage Locking, a286 Cres, Protruding Head, Shear, Stump-Type
- NAS-7004 THRU 7012 - Pin, Swage Locking, a286 Cres, 100 Degrees Shear/Tension Head, Pull-Type
- NAS-7014 THRU 7022 - Pin, Swage Locking, a286 Cres, Protruding Head, Shear/Tension, Pull-Type
- NAS-7024 THRU 7032 - Pin, Swage Locking, 108 Ksi Steel, 100 Degrees Shear/Tension Head, Pull-Type
- NAS-7034 THRU 7042 - Pin, Swage Locking, Alloy Steel, 108 Ksi Fsu, Protruding Head, Shear/Tension, Pull-Type
- NAS-9301 - Rivet, Blind, Protruding Head, Mechanically Locked Spindle, Bulbed Style a, Class 1, Code B and E
- NAS-9302 - RIVET, BLIND, 100o FLUSH HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE A, CLASS 2, CODE B AND E
- NAS-9303 - RIVET, BLIND, 100o FLUSH SHEAR HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE A, CLASS 3, CODE B AND E
- NAS-9304 - RIVET, BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE B, CLASS 1, CODE B AND E (OVERSIZE DIAMETER)
- NAS-9305 - Rivet, Blind, 100 Degrees Flush Head, Mechanically Locked Spindle, Bulbed Style B, Class 2, Code B and E (Oversize Diameter)
- NAS-9306 - Rivet, Blind, Flanged Dome Head, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code B and E
- NAS-9307 - Rivet, Blind, Protruding Head, Mechanically Locked Spindle, Bulbed, Style a, Class 1, Code M
- NAS-9308 - Rivet, Blind, 100 Degrees Flush Head, Mechanically Locked Spindle, Bulbed, Style a, Class 2, Code M
- NAS-9309 - Rivet, Blind, 100 Degrees Flush Shear Head, Mechanically Locked Spindle, Bulbed, Style a, Class 3, Code M
- NAS-9310 - Rivet, Blind, Protruding Head, Mechanically Locked Spindle, Bulbed, Style B, Class 1, Code m and C
- NAS-9311 - Rivet, Blind, 100 Degrees Flush Head, Mechanically Locked Spindle, Bulbed, Style B, Class 2, Code m and C
- NAS-9312 - Rivet, Blind, Flanged Dome Head, Mechanically Locked Spindle, Bulbed, Style B, Class 4, Code M
- NAS-9313 - Rivet, Solid, Close Tolerance, 100 Degrees Flush Head, Aluminum Alloy, Titanium-Columbium Alloy
- NAS-9314 - Rivet, Solid, Close Tolerance, 100 Degrees, Flush, Reduced Shear Head, Aluminum Alloy,
- NASM-14218 - Rivet, Solid, 120 Degrees Flush Interference Shear Head
- NASM-14219 - Rivet, Solid, 120 Degrees Flush Interference, Tension Type Head
- NASM-16535 - Rivet, Tubular, Oval Head
- NASM-16536 - Rivet, Tubular, 150 Degrees Flat Countersunk Head
- NASM-20426 - Rivet, Solid, Countersunk 100 Degrees , Precision Head, Aluminum and Titanium Columbium Alloy
- NASM-20427 - RIVET, SOLID, 100 DEG COUNTERSUNK HEAD, CARBON STEEL, CORROSION-RESISTANT STEEL, NICKEL-COPPER AND COPPER
- NASM-20470 - Rivet, Solid, Universal Head, Aluminum Alloy and Titanium Columbium Alloy
- NASM-20600 - Rivet, Blind, Structural Pull Stem, Self-Plugging, Protruding Head, Type Ii
- NASM-20601 - Rivet, Blind, Structural, Pull Stem, Self-Plugging, 100 Degrees Flush Head, Type Ii
- NASM-20604 - Rivet, Blind, Non-Structural, Universal Head, Class 1
- NASM-20605 - Rivet, Blind, Nonstructural, 100 Degrees Flush Head
- NASM-20613 - Rivet, Solid, Universal Head, Steel, Carbon and Steel, Corrosion-Resistant
- NASM-20615 - Rivet, Solid, Universal Head, Brass, Copper, Nickel-Copper Alloy
- NASM-21140 - Fasteners, Blind, High Strength, Pull Type, Positive Mechanical Lock, 100 Degrees Flus
- NASM-21141 - Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, Head, Corrosion Resisting Steel, 95 KSI Fsu
- NASM-24661 - Rivet, Blind, Countersunk Head, Drive Type
- NASM-24662 - Rivet, Blind, Universal Head, Drive Type
- NASM-27384 - Rivet, Blind, Drive Type
- NASM-33522 - Rivets, Blind, Structural, Mechanically Locked & Friction Retainer Spindle, (Reliabili
- NASM-33557 - Nonstructural Rivets for Blind Attachment; Limitations for Design and Usage
- NASM-47195 - Rivets, Blind, Self-Plugging Preparation for & Installationof
- NASM-47196 - Preparation for and Installation of Buck-Type Rivets
- NASM-5674 - Rivets, Structural, Aluminum Alloy, Titanium Columbium Alloy, General Specification Fo
- NASM-81177 - Fasteners, Blind, High Strength, Installation Formed, Alloy Steel, General Specificat
- NASM-81177/1 - Fasteners, Blind, High Strength, Installation Formed, Alloy Steel;Design and Usage Limitations For
- NASM-81177/2 - Fasteners, Blind, High Strength, Installation Formed, Threaded, Self-Locking, 100 Degr
- NASM-81177/3 - Fasteners, Blind, High Strength, Installation Formed, Threaded, Self-Locking, Protruding Head, 450 Degrees F, Alloy Steel, 112 Ksi Fsu
- NASM-83459 - RIVET, TITANIUM, BIMETAL, 95 KSI Fsu, GENERAL SPECIFICATION FOR
- NASM-83459/1 - Rivet, Titanium, Bimetal, 95 Ksi Fsu, Protruding Head, Type I
- NASM-83459/2 - Rivet, Titanium, Bimetal, 95 Ksi Fsu, 100 Degrees Tension Crown Head, Type Ii
- NASM-83459/3 - Rivet, Titanium, Bimetal 95 Ksi Fsu, 100 Degrees Reduced Flush Crown Head, Type Iii
- NASM-8814 - Rivets, Blind, Nonstructural Type
- NASM-8975 - Fastener, Blind, High Strength, Installation Formed, Cres, Heat Resistant Steel and Titanium, General Specification For
- NASM-8975/1 - Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant and Heat Resistant Steel and Titanium, Design and Usage Limitations For
- NASM-8975/2 - Fasteners, Blind, High Strength, Corrosion Resistant and Heat Resistant Steel, Flush Head, Type Ii, Class 1
- NASM-8975/3 - Fasteners, Blind, Titanium, Flush Head, Type Ii, Class 2
- NASM-8975/4 - Fasteners, Blind, High Strength, Corrosion Resistant and Heat Resistant Steel, Protruding Head, Type Ii, Class I
- NASM-8975/5 - Fasteners, Blind, Titanium, Protruding Head, Type Ii, Class 2
- NASM-8975/6 - Fasteners, Blind, High Strength, Titanium/Cres, Protruding Head, Type I, Class 2
- NASM-8975/7 - Fasteners, Blind, High Strength, Titanium/Cres, Flush Head, Type I, Class 2
- NASM-90353 - FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 Degrees FLUSH HEAD, ALLOY STEEL, 112 KSI Fsu
- NASM-90354 - Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, Protruding Head, Alloy Steel, 112 Ksi Fsu
- QPL-7885 - Rivets: Blind, Structural, Pull-Stem, and Chemically Expanded
- QPL-81177 - Fasteners, Blind, High Strength, Installation Formed, Alloy Steel, General Specification for (No Superseding Document)
- QPL-8975 - Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant Steel, Heat Resistant Steel and Titanium General Specification for (No Superseding Document)
- USAF-STD-445 - Rivet - Flush Head, Copper, Belt