FSC 5315: Nails, Machine Keys, and Pins
The following documents are a part of this series:- A-A-1957 - Fastener, Corrugated, Wood Joint
- A-A-1958 - Nail (Common)
- A-A-1959 - Nail (Casing)
- A-A-1960 - Nail (Brad, Fine)
- A-A-1961 - Nail (Roofing Composition)
- A-A-1962 - Nail (Box, Bright)
- A-A-1963 - Nail (Box, Cement Coated)
- A-A-2670 - Staple, Tacker
- A-A-55486 - Pin, Hinge
- A-A-55487 - Pin, Lock (Hitch Pin)
- A-A-55488 - Pin, Retaining, Safety
- A-A-60039 - Pins, Cadmium and Hexavalent-Chromium Free
- A-A-60044 - Keys, Cadmium and Hexavalent-Chromium Free
- AN-121551 - 121575 - Nut, Plain, Castellated Hexagon
- AN-121601 - 121650 - Pin, Straight, Headed - .125 Nom.
- AN-121651 - 121700 - Pin, Straight, Headed - .187 Nom.
- AN-121701 - 121750 - Pin, Straight, Headed - .250 Nom.
- AN-121751 - 121800 - Pin, Straight, Headed - .312 Nom.
- AN-121801 - 121850 - Pin, Straight, Headed - .375 Nom.
- AN-121851 - 121925 - Pin, Straight, Headed - .500 Nom.
- AN-122676 - 122775 - Pin, Straight, Headless, Steel
- AN-150201 - 150300 - Pin-Lock, Steel
- AN-150301 - Pin - Lock, Brass (See: an-150301 - 150400)
- AN-150301 - 150400 - Pin - Lock, Brass
- AN-280 - Key - Woodruff (Use ms-35756)
- AN-301 - Nail - Flat Head (No Superseding Document) (Use FF-N-103 or FF-N-105)
- AN-302 - Pin Escrutcheon
- AN-380 - Pin, Cotter (Use Ms24665)
- AN-381 - Pin, Cotter (Corrosion-Resistant Steel) (Use ms-24665)
- AN-385 - Pin - Tapered Plain (Superseded by ms-24692)
- AN-386 - Pin - Threaded Taper
- AN-392 - Pin - Flat Head '1-8' (Superseded by ms-20392)
- AN-393 - Pin - Flat Head '3-16' (Superseded by ms-20392)
- AN-394 - Pin - Flat Head '1-4' (Superseded by ms-20392)
- AN-395 - Pin - Flat Head '5-16' (Superseded by ms-20392)
- AN-396 - Pin - Flat Head '3-8' (Superseded by ms-20392)
- AN-397 - Pin - Flat Head '7-16' (Superseded by ms-20392)
- AN-398 - Pin - Flat Head '1-2' (Superseded by ms-20392)
- AN-399 - Pin - Flat Head '9-16' (Superseded by ms-20392)
- AN-400 - Pin - Flat Head '5-8' (Superseded by ms-20392)
- AN-402 - Pin - Flat Head '3-4' (Superseded by ms-20392)
- AN-404 - Pin - Flat Head '7-8' (Superseded by ms-20392)
- AN-406 - Pin - Flat Head '1' (Superseded by ms-20392)
- AN-409 - Pin - 100 Deg. Countersunk Head, High Shear, Oversize (See ms-21001)
- AN-411 - Pin - Flat Head, High Shear, Oversize, (See ms-21000)
- AN-415 - Pin - Lock (Hitch Pin) (Cancelled, 1994, Superseded by A-A-55487)
- AN-416 - Pin - Retaining, Safety (Cancelled, 1994, Superseded by A-A-55488)
- AS-121601 - 121650 - Pin, Straight, Headed - .125 Nom.
- AS-121651 - 121700 - Pin, Straight, Headed - .187 Nom.
- AS-121701 - 121750 - Pin, Straight, Headed, Cadmium Plated, UNS G87400, .250 Nom
- AS-121751 - 121800 - Pin, Straight, Headed - 312 Nom.
- AS-121801 - 121850 - Pin, Straight, Headed - 375 Nom.
- AS-121851 - 121925 - Pin, Straight, Headed, Cadmium Plated, UNS G87400, .500 Nom
- AS-122676 - 122775 - Pin, Straight, Headless, Steel, UNS G10950
- AS-123751 - 123850 - Pin, Cotter-Cres, UNS S30200, AS7210
- AS-150201 - 150300 - Pin-Lock, Steel (STABILIZED Feb 2014)
- AS-150301 - 150400 - Pin-Lock, Brass (STABILIZED Jul 2014)
- AS-20253 - Pin, Hinge Corrosion Resistant Steel Uns S30200, Uns S30400, or Uns S31600
- AS-3121 - Plug, Expansion, Aluminum, 2024-T4 and 2024-T351, Long; STD and .010 Oversize Diameters (Uns a92024)
- AS-3122 - Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Long (Uns a92024)
- AS-3123 - Plug, Expansion - Aluminum, 2024-T4 and 2024-T351, Short; STD and .010 Oversize Diameters, Uns a92024
- AS-3124 - Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Short, Uns a92024
- AS-3125 - Plug, Expansion - Cres, 416 or 416Se, Long; STD and .010 Oversize Diameters, Uns S41600/Uns S41623
- AS-3126 - Pin, Expansion - Cres, 416 or 416Se, Long, Uns S41600/Uns S41623
- AS-3127 - Plug, Expansion - Cres, 416 or 416Se, Short; STD and .010 Oversize Diameters, Uns S41600/Uns S41623
- AS-3128 - Pin, Expansion - Cres, 416 or 416Se, Short, Uns S41600/Uns S41623
- AS-3129 - Plug, Expansion - Cres, 303, Long; STD and .010 Oversize Diameters, Uns S30300
- AS-3130 - Pin, Expansion - Cres, 303, Long, Uns S30300
- AS-3131 - Plug, Expansion - Cres, 303, Short; STD and .010 Oversize Diameters, Uns S30300
- AS-3132 - Pin, Expansion - Cres, 303, Short, Uns S30300
- AS-3577 - Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718
- AS-4983 - Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For
- AS-7210 - Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification For
- AS-7211 - Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification
- AS-9047 - Pin - Spring, Steel, Phosphate Finish (STABILIZED Oct 2012)
- AS-9105 - Pin, Straight, Headless, AMS 5688, Lock
- AS-91641 - Pin, Straight, Headless, Oversize, Steel, UNS G10950
- AS-9389 - Pin, Straight, Headless - AMS 5735, Lock
- AS-9390 - Pin, Straight, Headless, Dowel - CRES, UNS S66286, Standard and Oversize
- AS-9462 - Pin, Straight, Headed, .124 Diameter, Cres, UNS S66286
- AS-9463 - Pin, Straight, Headed, .186 Diameter, Cres, UNS S66286
- AS-9464 - Pin, Straight, Headed, .248 Diameter, Cres, Uns S66286
- AS-9465 - Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
- AS-9466 - Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286
- AS-9467 - Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286
- AS-9468 - Pin, Straight, Headed .497 Diameter, Ams 5735
- AS-9486 - Pin, Straight, Headless - Ams 5132, Lock
- AS-9841 - Key, Woodruff - Chamfered Cres Ams 5640
- AS-9842 - Pin, Straight, Headed, .0937 Diameter, Uns S41800
- AS-9843 - Pin, Straight, Headed, .1249 Diameter, Uns S41800
- AS-9844 - Pin, Straight, Headed, .1874 Diameter, Uns S41800
- AS-9845 - Pin, Straight, Headed, .2499 Diameter, Uns S41800
- AS-9846 - Pin, Straight, Headed, .3124 Diameter, Uns S41800
- AS-9847 - Pin, Straight, Headed, .3749 Diameter, Uns S41800
- AS-9848 - Pin, Straight, Headed, .4999 Diameter, Uns S41800
- DOD-P-63464 - Pin, Grooved, Headless Longitudinal Groove, General Specification for, Metric
- DOD-P-63464/1 - Pin, Grooved, Headless Longitudinal Taper Groove, Carbon Steel, Metric
- DOD-P-63464/2 - Pin, Grooved, Headless Longitudinal Taper Groove, Corrosion Resisting Steel, Metric
- DOD-P-63464/3 - Pin, Grooved, Headless Longitudinal Straight Groove, Carbon Steel, Metric
- DOD-P-63464/4 - Pin, Grooved, Headless Longitudinal Straight Groove, Corrosion Resisting Steel, Metric
- DOD-P-63464/5 - Pin, Grooved, Headless Longitudinal Center Groove, Carbon Steel, Metric
- DOD-P-63464/6 - Pin, Grooved, Headless Longitudinal Center Groove, Corrosion Resisting Steel, Metric
- DOD-P-63464/7 - Pin, Grooved, Headless Longitudinal, Half Length Taper Groove, Corrosion Resistant, Steel, Metric
- DOD-P-63464/8 - Pin, Grooved, Headless Longitudinal, Half Length Reverse Taper Groove, Corrosion Resistant, Steel, Metric
- DOD-P-63477 - Pin, Spring, Tubular, (Coiled and Slotted), General Specificattion for, Metric
- DOD-P-63477/1 - Pin, Spring, Tubular, Slotted, Carbon Steel, Metric
- DOD-P-63477/2 - Pin, Spring, Tubular, Slotted, Cres 420, Metric
- DOD-P-63477/3 - Pin, Spring, Tubular, Coiled, Light Duty, Carbon Steel, Metric
- DOD-P-63477/4 - Pin, Spring, Tubular, Coiled, Light Duty, Cres 302, Metric
- DOD-P-63477/5 - Pin, Spring, Tubular, Coiled, Standard Duty, Carbon Steel, Metric
- DOD-P-63477/6 - Pin, Spring, Tubular, Coiled, Standard Duty, Cres 302, Metric
- DOD-P-63477/7 - Pin, Spring, Tubular, Slotted, Standard Duty, Cres 420, Metric
- DOD-P-63477/8 - Pin, Spring, Tubular, Coiled, Heavy Duty, Carbon Steel, Metric
- DOD-P-63477/9 - Pin, Spring, Tubular, Coiled, Heavy Duty Cres 420, Metric
- DOD-P-63478 - Pin, Straight, Headless (Dowel), General Specification for, Metric
- DOD-P-63478/1 - Pin, Straight, Headless, (Dowel) Standard Size, Metric
- DOD-P-63478/2 - Pin, Straight, Headless (Dowel) Oversize, Metric
- DOD-P-63479 - Pin, Straight, Headed (Clevis Pin) General Specification for, Metric
- DOD-P-63479/1 - Pin, Straight, Headed (Clevis Pin), Metric
- DOD-P-63542 - Pin, Groove, Headed-Longitudinal Groove, Metric, General Specification For
- FF-F-133 - Fastener, Corrugated, Wood Joint (Saw Edge)
- FF-N-103 - Nail (Small) and Tack, Cut (Cancelled, 7/31/73, Use FF-N-105 and FF-T-1813)
- FF-N-105 - Nails, Brads, Staples & Spikes: Wire, Cut & Wrought
- FF-P-386 - Pin, Cotter (Split)
- FF-P-395 - Pin, Drive Guided & Pin Drive, Powder Actuated (Fasteners for Powder Actyated & Hand A
- FF-P-395/1 - Pin, Drive, Power Actuated, Type I - for Use With Direct-Acting (Gas Driven, No Piston
- FF-P-395/2 - Pin, Drive, Power Actuated, Type I - for Use With Direct-Acting (Gas Driven, No Piston
- FF-P-395/3 - Pin, Drive, Power Actuated, Type Ii - for Use With Indirect-Acting (Piston Driven) Low
- FF-P-395/4 - Pin, Drive, Power Actuated, Type Ii - for Use With Indirect-Acting (Piston Driven) Low
- FF-P-395/5 - Pin, Drive, Power Actuated, Type Ii - for Use With Indirect-Acting (Piston Driven) Low
- FF-P-395/6 - Pin, Drive, Power Actuated, Type Ii - for Use With Indirect-Acting (Piston Driven) Low
- FF-P-395/7 - Pin, Drive, Power Actuated, Type Ii - for Use With Indirect-Acting (Piston Driven) Low
- FF-P-395/8 - Pin, Drive, Hand Actuated, Type Iii - for Use With Hand Driven Tools Class 1 - Fastene
- FF-P-395/9 - Pin, Drive, Hand Actuated, Type Iii - for Use With Hand Driven Tools Class 1 - Fastern
- FF-S-606 - Spikes and Nails, Common, Cut, Spike, Gutter and Round, +Cancelled, No S/S Document+
- FF-T-1813 - Tack
- MA-3259 - Pin, Cotter - Cres, UNS S32100, AS7211, Metric Series
- MA-4018 - Pin, Straight, Headless, AMS 5688, Metric
- MA-4019 - Pin, Straight, Headless, AMS 5732, Metric
- MA-4070 - Pins, Procurement Specification For, Metric
- MA-7211 - Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For
- MIL-C-82408 - Corrosion Resistant Split Keys, Buoy Shackle (No Superseding Document)
- MIL-DTL-27235 - Pin, Straight, Headed (Clevis Pins)
- MIL-DTL-45952 - Pin, Quick-Release, Detent General Specification for
- MIL-F-19700 - Fasteners, Screw Threaded, and Related Items, Non-Magnetic (No Superseding Document)
- MIL-K-27545 - Key, Woodruff, Alloy Steel (Superseded by NASM-27545)
- MIL-N-1729 - Nail, Horseshoe
- MIL-P-10971 - Pin, Spring, Tubular (Coiled and Slotted) (Superseded by Nasm 10971)
- MIL-P-13390 - Pin Lock. Sintered Iron
- MIL-P-16610 - Pin, Tapered, Plain (Superseded by NASM-16610)
- MIL-P-20700 - Pin, Grooved, Headless, Longitudinal Groove (Superseded by NASM-20700)
- MIL-P-21143 - Pin, Straight, Headless (Dowel) General Specification for (Superseded by NASM-21143)
- MIL-P-21143/1 - Pin, Straight, Headless (Dowel) (.0002 Over Size) Cres 303 (No Superseding Document)
- MIL-P-21143/2 - Pin, Straight, Headless, (Dowel) (.0002 Under Size), Cres 303 (No Superseding Document)
- MIL-P-27235 - Pin, Straight, Headed (Clevis Pins)
- MIL-P-27523 - Pins, Straight, Headed (Clevis Pins)
- MIL-P-5673 - Pin, Straight, Headed (Superseded by Nasm5673)
- MIL-P-63464/6 - Pin, Grooved, Headless-Longitudinal Center Groove, Corrosion-Resistant Steel, Metric
- MIL-STD-1755 - Keys and Pins Preferred for Design, Listing of (No Superseding Document)
- MS-14531 - Pin, Quick Release With Warning Streamer Assembly (Superseded by NASM-14531)
- MS-15025 - Dowel Pin, 1/4-Inch (for Metal Furniture)
- MS-15026 - Dowel Pin, 3/8-Inch (for Metal Furniture)
- MS-16555 - Pin, Straight, Headless (Dowel) (.0002 Over Nominal Size) (Superseded by NASM--16555)
- MS-16556 - Pin, Straight, Headless (Dowel), (.001 Over Nominal Size) (Superseded by NASM--16556)
- MS-16562 - Pin, Spring, Tubular, Slotted (Superseded by NASM-16562)
- MS-16606 - Pin, Retaining, Gasket (No Superseding Document)
- MS-17106 - Nail, Ringed (Fetter Ring) (No Superseding Document)
- MS-171401 - 171900 - Pin - Spring, Corrosion Resistant Steel
- MS-20065 - Key, Machine, Rectangular in Cross-Section, Both Ends Square (Superseded by NASM-20065)
- MS-20066 - Key, Machine, Square in Cross-Section, Both Ends Square (Superseded by NASM-20066)
- MS-20067 - Key, Machine, Square in Cross-Section, One End Square, Other End Round (Superseded by NASM-20067)
- MS-20068 - Key, Machine, Square in Cross-Section, Both Ends Round (Superseded by NASM-20068)
- MS-20253 - Pin, Hinge (Superseded by SAE as-20253)
- MS-20392 - Pin, Straight, Headed, Drilled Shank (Superseded by NASM-20392)
- MS-21261 - Key, Woodruff-Chamfered (Superseded by ms-35756B)
- MS-21309 - Staple, Ground Wire (Pole Line) (No Superseding Document)
- MS-24665 - Pin, Cotter (Split) (Superseded by NASM-24665)
- MS-24692 - Pin, Tapered, Plain (Superseded by NASM-24692)
- MS-35386 - Pin, Lock (Use MIL-R-52243)
- MS-35671 - Pin, Grooved, Headless, Longitudinal Taper Groove, Carbon Steel (Superseded by NASM-35671)
- MS-35672 - Pin, Grooved, Headless, Longitudinal Taper Grooved, Corrosion-Resisting Steel (Superseded by NASM-35672)
- MS-35673 - Pin, Grooved, Headless - Longitudinal Taper Groove, Brass
- MS-35674 - Pin, Grooved, Headless, Longitudinal Straight Groove, Carbon Steel (Superseded by NASM-35674)
- MS-35675 - Pin, Grooved, Headless, Longitudinal Straight Groove, Corrosion-Resisting Steel (Superseded by NASM-35675)
- MS-35676 - Pin, Grooved, Headless, Longitudinal Straight Groove, Brass (No Superseding Document)
- MS-35677 - Pin, Grooved, Headless, Longitudinal Center Groove, Carbon Steel (Superseded by NASM-35677)
- MS-35678 - Pin, Grooved, Headless-Longitudinal Center Groove, Corrosion-Resisting Steel (Superseded by NASM-35678)
- MS-35679 - Pin, Grooved, Headless, Longitudinal Center Groove, Brass (No Superseding Document)
- MS-35756 - Key, Woodruff, Steel Alloy, With Keyway and Key Slot Dimensions (Superseded by NASM-35756)
- MS-35810 - Pin, Straight, Headed (Clevis Pin) Steel, Cadmium or Zinc Plated
- MS-39086 - Pin, Spring, Tubular, Coiled, Heavy Duty (Superseded by NASM-39086)
- MS-51400 - Pin, Straight, Headless (Superseded by NASM-51400)
- MS-51538 - Nail, Masonry (Superseded by ASTM-F1667)
- MS-51539 - Nail, Gypsum, Wall Board (Superseded by ASTM-F1667)
- MS-51540 - Nail, Pallet (Superseded by ASTM-F1667)
- MS-51541 - Nail, Sinker (Superseded by ASTM-F1667)
- MS-51542 - Nail, Underlayment (Superseded by ASTM-F1667)
- MS-51543 - Nail, Underlayment (Superseded by ASTM-F1667)
- MS-51544 - Nail, Flooring (Superseded by ASTM-F1667)
- MS-51546 - Nail, Corker (Superseded by ASTM-F1667)
- MS-51547 - Nail, Concrete (Superseded by ASTM-F1667)
- MS-51548 - Nail, Cooler (Superseded by ASTM-F1667)
- MS-51549 - Nail, Box (Superseded by ASTM-F1667)
- MS-51605 - Pin, Grooved, Headless (Half Length Taper Groove) Corrosion-Resisting Steel (Superseded by NASM-51605)
- MS-51606 - Pin, Grooved, Headless (Half Length Reverse Taper Groove) Corrosion-Resistant Steel
- MS-51838 - Pin, Straight, Steel-Drill Rod (Superseded by NASM-51838)
- MS-51923 - Pin, Spring-Tabular, Coiled, Medium Duty (Superseded by NASM-51923)
- MS-51932 - Pin, Straight-Headless, Drilled for Cotter Pins (Superseded by NASM-51932)
- MS-51935 - Key Machine - g.B. Head
- MS-51987 - Pin, Spring, Tubular, Coiled, Light Duty (Superseded by NASM-51987)
- MS-9047 - Pin - Spring, Steel, Phosphate Finish (Superseded by ms-171401Thrums-171900)
- MS-9048 - Pin - Spring, Steel, Cadmium Plated (Superseded by ms-171401Thrums-171900)
- MS-90709 - Nail, Boat (Superseded by ASTM-F1667)
- MS-90710 - Nail, Brad Type (Brads, Nails, Casing, Nails, Finishing) (Superseded by ASTM-F1667)
- MS-90711 - Nail, Clout, Cut (Superseded by ASTM-F1667)
- MS-90712 - Nail, Common, Cut (Superseded by ASTM-F1667)
- MS-90713 - Nail, Common, Wire (Superseded by ASTM-F1667)
- MS-90714 - Nail, Composition Roofing (Superseded by ASTM-F1667)
- MS-90715 - Nail, Double-Headed (Superseded by ASTM-F1667)
- MS-90716 - Nail, Foundry (No Superseding Document)
- MS-90717 - Spikes; Barge and Boat (Superseded by ASTM-F1667)
- MS-90718 - Spike, Common, Wire (Superseded by ASTM-F1667)
- MS-90719 - Staple, Cable, Electrician's
- MS-90720 - Staple, Fence (Superseded by ASTM-F1667)
- MS-90721 - Staple, Wiring, Electrican' S (Superseded by ASTM-F1667)
- MS-90722 - Tack, Cut
- MS-9105 - Pin, Straight, Headless, AMS 5688, Lock (Superseded by SAE as-9105)
- MS-9164 - Pin, Straight, Headless, Steel, Oversize (Superseded by SAE as-91641)
- MS-9245 - Pin, Cotter - Cres, AMS 7211 (Superseded by SAE as-9245)
- MS-9389 - Pin, Straight, Headless - AMS 5735, Lock (Asg) (Superseded by SAE as-9389)
- MS-9390 - Pin, Straight, Headless--Cres, AMS 5735, Dowel Standard and Oversize (Superseded by SAE as-9390)
- MS-9462 - Pin, Straight, Headed-.124 Diameter, AMS 5735 (Asg) (Superseded by SAE as-9462)
- MS-9463 - Pin, Straight, Headed- .186 Diameter, AMS 5735 (Asg) (Superseded by SAE as-9463)
- MS-9464 - Pin, Straight, Headed- .248 Diameter, Ms 5735 (Asg) (Superseded by SAE as-9464)
- MS-9465 - Pin, Straight, Headed- .311 Diameter, AMS 5735 (Asg) (Superseded by SAE as-9465)
- MS-9466 - Pin, Straight, Headed-.373 Diameter, AMS 5735 (Superseded by SAE as-9466)
- MS-9467 - Pin, Straight, Headed .436 Diameter, AMS 5735 (Superseded by SAE as-9467)
- MS-9468 - Pin, Straight, Headed .497 Diameter, AMS 5735 (Superseded by SAE as-9468)
- MS-9486 - Pin, Straight, Headless - AMS 5132, Lock (Superseded by SAE as-9486)
- MS-9841 - Key, Woodruff - Chamfered Cres AMS5640 (Superseded by SAE as-9841)
- MS-9842 - Pin, Straight, Headed .0937 Diameter, AMS5616 (Superseded by SAE as-9842)
- MS-9843 - Pin, Straight, Headed .1249 Diameter, AMS5616 (Superseded by SAE as-9843)
- MS-9844 - Pin, Straight, Headed .1874 Diameter, AMS5616 (Superseded by SAE as-9844)
- MS-9845 - Pin, Straight, Headed .2499 Diameter, AMS5616 (Superseded by SAE as-9845)
- MS-9846 - Pin, Straight, Headed .3124 Diameter, AMS5616 (Superseded by SAE as-9846)
- MS-9847 - Pin, Straight, Headed .3749 Diameter, AMS5616 (Superseded by SAE as-9847)
- MS-9848 - Pin, Straight, Headed .4999 Diameter, AMS5616 (Superseded by SAE as-9848)
- NAS-1292 THRU 1296 - Pin, Threaded, Shear, 100 Degrees Csk Head
- NAS-1322 THRU 1326 - Pin, Threaded, Shear, Protruding Head
- NAS-1333 THRU 1346 - Pin, Quick Release, Positive Locking, Single, Acting
- NAS-1353 THRU 1366 - Pin, Quick Release, Positive Locking, Double Acting
- NAS-2205 THRU 2212 - Bolt, Lock, Tension, Protruding Head, Stump Type, Titanium Alloy
- NAS-2306 THRU 2312 - Bolt, Lock, Tension, 100 Degrees Head (Ms24694), Stump-Type, Titanium Alloy
- NAS-2315 THRU 2322 - Bolt-Lock, Tension, 100 Deg Head (ms-20426), Stump-Type, Titanium Alloy
- NAS-2325 THRU 2332 - Bolt-Lock, Tension, 100 Deg. Crown Head, Stump-Type, Titanium Alloy
- NAS-41 - Pin - Continuous Hinge
- NAS-427 - Pin, Pulley Guard
- NAS-4450 - Pin, Crimp, Protruding Shear Head
- NAS-4452 - Pin, Crimp, 100 Degrees Flush Shear Head
- NAS-4458 - Pin, Crimp, Protruding Tension Head
- NAS-4466 - Pin, Crimp, 100 Degrees Crown Shear/Tension Head
- NAS-558 - Keys, Square and Rectangular
- NAS-561 - Pins, Spring, Slotted and Coiled, Heavy Duty
- NAS-607 - Pin, Straight, Headless, Dowel
- NASM-10971 - Pin, Spring, Tubular, Coiled and Slotted
- NASM-14531 - Pin, Quick Release With Warning Streamer Assembly
- NASM-16555 - Pin, Straight, Headless, Dowel, .0002 Over Nominal Size
- NASM-16556 - Pin, Straight, Headless (Dowel) (.001 Over Nominal Size)
- NASM-16562 - Pin, Spring, Tubular, Slotted
- NASM-16610 - Pin, Tapered, Plain
- NASM-171401 - 171900 - Pin - Spring, Corrosion Resistant Steel
- NASM-17984 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, Button Handle
- NASM-17985 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, 'T' Handle
- NASM-17986 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, 'l' Handle
- NASM-17987 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, Ring Handle
- NASM-17988 - Pin, Quick Release, Self-Retaining, Positive Locking, Double Acting, 'T' Handle
- NASM-17989 - Pin, Quick Release, Self-Retaining, Positive Locking, Double Acting, 'l' Handle
- NASM-17990 - Pin, Quick Release, Positive Locking, Double Acting, Ring Handle
- NASM-20065 - Key, Machine, Rectangular in Cross Section, Both Ends Square
- NASM-20066 - Key, Machine, Square in Cross Section, Both Ends Square
- NASM-20067 - Key, Machine, Square in Cross Section, One End Square, Other End Round
- NASM-20068 - Key, Machine, Square in Cross Section, Both Ends Round
- NASM-20392 - Pin, Straight, Headed Drilled Shank
- NASM-20700 - Pin, Grooved, Headless, Longitudinal Groove
- NASM-21143 - Pin, Straight, Headless (Dowel), General Specification For
- NASM-21143/1 - Pin, Straight, Headless, Dowel, .0002 Oversize, Cres 303
- NASM-21143/2 - Pin, Straight, Headless, (Dowel) (.0002 Under Size), Cres 303
- NASM-23460 - Pin, Quick-Release, Self-Retaining, Positive-Locking
- NASM-24665 - Pin, Cotter (Split)
- NASM-24692 - Pin, Tapered, Plain
- NASM-27545 - Key, Woodruff, Alloy Steel
- NASM-302 - Pin, Escutcheon
- NASM-33547 - Pins, Spring, Functional Limitations Of
- NASM-35671 - Pin, Grooved, Headless, Longitudinal Taper Groove, Carbon Steel
- NASM-35672 - Pin, Grooved, Headless, Longitudinal Taper Groove, Corrosion-Resisting Steel
- NASM-35674 - Pin, Grooved, Headless, Longitudinal Straight Groove, Carbon Steel
- NASM-35675 - Pin, Grooved, Headless, Longitudinal Straight Groove, Corrosion-Resisting Steel
- NASM-35677 - Pin, Grooved, Headless, Longitudinal Center Groove, Carbon Steel
- NASM-35678 - Pin, Grooved, Headless, Longitudinal Center Groove, Corrosion Resisting Steel
- NASM-35756 - Key, Woodruff, Steel, Alloy, With Keyway & Key Slot Dimensions
- NASM-386 - Pin, Threaded, Taper
- NASM-39086 - Pin, Spring, Tubular, Coiled, Heavy Duty
- NASM-51400 - Pin, Straight, Headless
- NASM-51605 - Pin, Grooved, Headless, Half Length Taper Groove, Cres
- NASM-51838 - Pin, Straight, Steel, Drill Rod
- NASM-51923 - Pin, Spring, Tubular, Coiled, Standard Duty
- NASM-51932 - Pin, Straight, Headless, Drilled for Cotter Pins
- NASM-51987 - Pin, Spring, Tubular, Coiled, Light Duty
- NASM-5673 - Pin, Straight, Headed
- OO-K-220 - Key, Machine
- USAF-STD-303 - Nail - Upholster's - Oval