Document Center is acquired by Nimonik

FSC 5306: Bolts

The following documents are a part of this series:

ASTM:

• ASTM-A325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
• ASTM-A490 - Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)

US GOVERNMENT DOCUMENTS:

• A-A-60035 - Bolts, Cadmium and Hexavalent-Chromium Free
• AMS-7459 - Bolts and Screws Steel, Low Alloy Heat Resistant 195,000 Psi - Hardened & Tempered, Roll Threaded (Cancelled and Replaced by AS-7459)
• AMS-7469 - Bolts & Screws, Nickel Alloy, Corrosion & Heat +Cancelled, 1991/93, Superseded By as-7469
• AMS-7470 - Bolts and Screws Steel, Corrosion and Moderate Heat Resistant, Heat Treated, Roll Threaded (Ams 5616) (Cancelled Jan 1991)
• AMS-7472 - Bolts and Screws Steel, Corrosion Resistant, Roll Threaded (Ams 5637) (Cancelled Jan 1991)
• AMS-7473 - Bolts & Screws, Carbon Steels, Alloy Steel, or Corrosion +Canc, 1991/93, Superseded By as-7473
• AMS-7474 - Bolts & Screws, Corrosion Resistant Steel, Upset Headed, Heat +Canc, 1991/93, Use as-7474
• AMS-7477 - Bolts and Screws-Steel Corrosion and Heat Resistant, Upset Headed, Heat Treated, Roll Threaded Solution and Precipitation Treated (Ams 5731) (Cancelled Jan 1991)
• AMS-7478 - Bolts & Screws, Corrosion & Heat Resistant Steel, Heat Treated +Canc, 1991/93, Use as-7478
• AMS-7479 - Bolts & Screws, Corrosion & Heat Resistant Steel, Heat Treated +Canc, 1991/93, Use as-7479
• AN-101001 - Bolt - Hex Head, .190-32 (Inactive After 3 Mar 1969)
• AN-101001 - 101100 - Bolt - Hex Head, .190-32
• AN-101101 - Bolt - Hex Head .250-28 (Inactive After 3 Mar 1969)
• AN-101101 - 101200 - Bolt - Hex Head .250-28
• AN-101201 - Bolt - Hex Head .3125-24 (Inactive After 3 Mar 1969) (See AN-101201 Thru 101300)
• AN-101201 - 101300 - Bolt - Hex Head .3125-24
• AN-101301 - 101400 - Bolt - Hex Head .375-24
• AN-101401 - 101500 - Bolt - Hex Head .4375-20
• AN-101501 - 101600 - Bolt - Hex Head .500-20
• AN-101601 - 101700 - Bolt - Hex Head .5625-18
• AN-101701 - 101800 - Bolt - Hex Head .625-18
• AN-101801 - Bolt - Hex Head .750-16 (Inactive After 3 Mar1969) +Cancelled, 1987, No S/S Document+
• AN-101801 - 101900 - Bolt - Hex Head .750-16
• AN-101901 - 102000 - Bolt - Hex Head, Drilled Shank, .190-32
• AN-102001 - 102100 - Bolt - Hex Head, Drilled Shank, .250-28
• AN-102101 - 102200 - Bolt - Hex Head, Drilled Shank, .3125-24
• AN-102201 - 102300 - Bolt - Hex Head, Drilled Shank, .375-24
• AN-102301 - 102400 - Bolt - Hex Head, Drilled Shank, .4375-20
• AN-102401 - 102500 - Bolt - Hex Head, Drilled Shank, .500-20
• AN-102501 - 102600 - Bolt - Hex Head, Drilled Shank, .5625-18
• AN-102601 - 102700 - Bolt - Hex Head, Drilled Shank, .625-18
• AN-102701 - 102800 - Bolt - Hex Head, Drilled Shank, .750-16
• AN-102801 - 102900 - Bolt - Drilled Hex Head, 1 Hole .190-32
• AN-102901 - 103000 - Bolt - Drilled Hex Head, 1 Hole .250-28
• AN-103001 - 103100 - Bolt - Drilled Hex Head, 1 Hole, .3125-24
• AN-103101 - 103200 - Bolt - Drilled Hex Head, 1 Hole, .375-24
• AN-103201 - 103300 - Bolt - Drilled Hex Head, 1 Hole, .4375-20
• AN-103301 - 103400 - Bolt - Drilled Hex Head, 1 Hole, .500-20
• AN-103401 - 103500 - Bolt - Drilled Hex Head, 1 Hole, .5625-18
• AN-103501 - 103600 - Bolt - Drilled Hex Head, 1 Hole, .625-18
• AN-103601 - 103700 - Bolt - Drilled Hex Head, 1 Hole, .750-16
• AN-103701 - 103800 - Bolt - Drilled Hex Head, 6 Holes, .190-32
• AN-103801 - 103900 - Bolt - Drilled Hex Head, 6 Holes, .250-28
• AN-103901 - 104000 - Bolt - Drilled Hex Head, 6 Holes, .3125-24
• AN-104001 - 104100 - Bolt - Drilled Hex Head, 6 Holes, .375-24
• AN-104101 - 104200 - Bolt - Drilled Hex Head, 6 Holes, .4375-20
• AN-104201 - 104300 - Bolt - Drilled Hex Head, 6 Holes, .500-20
• AN-104301 - 104400 - Bolt - Drilled Hex Head, 6 Holes, .5625-18
• AN-104401 - 104500 - Bolt - Drilled Hex Head, 6 Holes, .625-18
• AN-104501 - 104600 - Bolt - Drilled Hex Head, 6 Holes, .750-16
• AN-104601 - Bolt - Cres Hex Head, .190-32 (Inactive After 27 Dec 1966) (See an-104601 - 104700)
• AN-104601 - 104700 - Bolt - Cres Hex Head .190-32
• AN-104701 - Bolt - Cres Hex Head, .250-28 (Inactive After 27 Dec 1966) (See an-104701 - 104800)
• AN-104701 - 104800 - Bolt - Cres Hex Head, .250-28
• AN-104801 - Bolt - Cres Hex Head .3125-24 (Inactive After 27 Dec 1966) (See an-104801 - 104900)
• AN-104801 - 104900 - Bolt - Cres Hex Head .3125-24
• AN-104901 - Bolt - Cres Hex Head .375-24 (See: an-104901 - 105000)
• AN-104901 - 105000 - Bolt - Cres Hex Head .375-24
• AN-105001 - Bolt - Cres Hex Head .4375-20 (Inactive 12-27-66) (See an-105001 - 105100)
• AN-105001 - 105100 - Bolt - Cres Hex Head .4375-20
• AN-105101 - Bolt - Cres Hex Head .5000-20 (Inactive 12-27-66) (See an-105101 - 105200)
• AN-105101 - 105200 - Bolt - Cres Hex Head .500-20
• AN-105107 - 105800 - Bolt - Cres Hex Head, Drilled Shank, .3152-24
• AN-105201 - Bolt - Cres Hex Head .5625-18 (Inactive 12-27-66) (See an-105201 - 105300)
• AN-105201 - 105300 - Bolt - Cres Hex Head .5625-18
• AN-105301 - Bolt - Cres Hex Head .625-18 (Inactive 12-27-66) (See an-105301 - 105400)
• AN-105301 - 105400 - Bolt - Cres Hex Head .625-18
• AN-105401 - Bolt - Cres Hex Head .750-16 (Inactive 12-27-66) (See an-105401 - 105500)
• AN-105401 - 105500 - Bolt - Cres Hex Head .750-15
• AN-105501 - Bolt - Cres Hex Head, Drilled Shank, .190-32 (See: an-105501 - 105600)
• AN-105501 - 105600 - Bolt - Cres Hex Head, Drilled Shank, .190-32
• AN-105601 - Bolt - Cres Hex Head, Drilled Shank, .250-28 (See: an-105501 - 105600)
• AN-105601 - 105700 - Bolt - Cres Hex Head, Drilled Shank, .250-28
• AN-105701 - Bolt - Cres Hex Head, Drilled Shank, .3125-24 (See: an-105701 - 105800)
• AN-105701 - 105800 - Bolt - Cres Hex Head, Drilled Shank, .3125-24
• AN-105801 - Bolt - Cres Hex Head, Drilled Shank, .375-24 (Inactive 12-27-66 See: an-105801 - 105900)
• AN-105801 - 105900 - Bolt - Cres Hex Head, Drilled Shank, .375-24
• AN-105901 - Bolt - Cres Hex Head, Drilled Shank, .4375-20(Inactive 12-27-66 See: an-105901 - 106000)
• AN-105901 - 106000 - Bolt - Cres Hex Head, Drilled Shank, .4375-20
• AN-106001 - Bolt - Cres Hex Head, Drilled Shank, .500-20 (Inactive 12/66) (See an-106001 - 106100)
• AN-106001 - 106100 - Bolt - Cres Hex Head, Drilled Shank, .500-20
• AN-106101 - Bolt - Cres Hex Head, Drilled Shank, .5625-18 (Inactive 12-27-66 See an-106101 - 106200)
• AN-106101 - 106200 - Bolt - Cres Hex Head, Drilled Shank, .5625-18
• AN-106201 - Bolt - Cres Hex Head, Drilled Shank, .625-18 (Inactive 12-27-66) (See an-106201 - 106300)
• AN-106201 - 106300 - Bolt - Cres Hex Head, Drilled Shank, .625-18
• AN-106301 - Bolt - Cres Hex Head, Drilled Shank, .750-16 (Inactive After 27 Dec 1966) (See an-106301 - 106400)
• AN-106301 - 106400 - Bolt - Cres Hex Head, Drilled Shank, .750-16
• AN-106401 - Bolt - Cres Drilled Hex Head, 1 Hole, .190-32 (Inactive After 27 Dec 1966) (See an-106401 - 106500)
• AN-106401 - 106500 - Bolt - Cres Drilled Hex Head, 1 Hole, .190-32
• AN-106501 - Bolt - Cres Drilled Hex Head, 1 Hole, .250-28 (See: an-106501 - 106600)
• AN-106501 - 106600 - Bolt - Cres Drilled Hex Head, 1 Hole, .250-28
• AN-106601 - Bolt - Cres Drilled Hex Head, 1 Hole, .3125-24 (See: an-106601 - 106700)
• AN-106601 - 106700 - Bolt - Cres Drilled Hex Head, 1 Hole, .3125-24
• AN-106701 - Bolt - Cres Drilled Hex Head, 1 Hole, .375-24 (Inactive (See an-106701 Thru 106800)
• AN-106701 - 106800 - Bolt - Cres Drilled Hex Head, 1 Hole, .375-24
• AN-106801 - Bolt - Cres Drilled Hex Head, 1 Hole, .4375-20 (See: an-106801 - 106900)
• AN-106801 - 106900 - Bolt - Cres Drilled Hex Head, 1 Hole .4375-20
• AN-106901 - Bolt - Cres Drilled Hex Head, 1 Hole, .500-20 (Inactive After 27 Dec 1966) (See an-106901 - 107000)
• AN-106901 - 107000 - Bolt - Cres Drilled Hex Head, 1 Hole, .500-20
• AN-107001 - Bolt - Cres Drilled Hex Head, 1 Hole, .5625-18 (Inactive After 27 Dec 1966) (See an-107001 - 107100)
• AN-107001 - 107100 - Bolt - Cres Drilled Hex Head, 1 Hole, .5625-18
• AN-107101 - Bolt - Cres Drilled Hex Head, 1 Hole, .625-18 (Inactive After 27 Dec 1966) (See an-107101 - 107200)
• AN-107101 - 107200 - Bolt - Cres Drilled Hex Head, 1 Hole .625-18
• AN-107201 - Bolt - Cres Drilled Hex Head, 1 Hole, .750-16 (Inactive After 27 Dec 1966) (See an-107201 - 1073
• AN-107201 - 107300 - Bolt - Cres Drilled Hex Head, 1 Hole, .750-16
• AN-107301 - Bolt - Cres Drilled Hex Head, 6 Holes, .190-32 (See: an-107301 - 107400)
• AN-107301 - 107400 - Bolt - Cres Drilled Hex Head, 6 Holes, .190-32
• AN-107401 - Bolt - Cres Drilled Hex Head, 6 Holes, .250-28 (See: an-107401 - 107500)
• AN-107401 - 107500 - Bolt - Cres Drilled Hex Head, 6 Holes, .250-28
• AN-107501 - Bolt - Cres Drilled Hex Head, 6 Holes, .3125-24 (Inactive After 27 Dec 1966) (See an-107501 - 107600)
• AN-107501 - 107600 - Bolt - Cres Drilled Hex Head, 6 Holes, .3125-24
• AN-107601 - Bolt - Cres Drilled Hex Head, 6 Holes, .375-24 (See an-107601 - 107700)
• AN-107601 - 107700 - Bolt - Cres Drilled Hex Head, 6 Holes .325-24
• AN-107701 - Bolt - Cres Drilled Hex Head, 6 Holes, .4375-20 (See an-107701 - 107800)
• AN-107701 - 107800 - Bolt - Cres Drilled Hex Head, 6 Holes, .4375-20
• AN-107801 - Bolt - Cres Drilled Hex Head, 6 Holes, .500-20 (Inactive After 27 Dec 1966) (See an-107801 - 107900)
• AN-107801 - 107900 - Bolt - Cres Drilled Hex Head, 6 Holes, .500-20
• AN-107901 - Bolt - Cres Drilled Hex Head, 6 Holes, .5625-18 (Inactive After 27 Dec 1966)
• AN-107901 - 108000 - Bolt - Cres Drilled Hex Head, 6 Holes, .5625-18
• AN-108001 - Bolt - Cres Drilled Hex Head, 6 Holes, .625-18 (Inactive (See an-108001 - 108100)
• AN-108001 - 108100 - Bolt - Cres Drilled Hex Head, 6 Holes, .625-18
• AN-108101 - Bolt - Cres Drilled Hex Head, 6 Holes, .750-16 (Inactive (See an-108101 - 108200)
• AN-108101 - 108200 - Bolt - Cres Drilled Hex Head, 6 Holes, .750-16
• AN-115401 - 115450 - Screw - Flat Fillister Head, .190-32
• AN-115551 - 115600 - Screw - Flat Fillister Head, .375-24 (Inactive 10-26-72)
• AN-115601 - 115650 - Screw - Flat Fillister Head, Drilled Shank, .190-32
• AN-115751 - 115800 - Screw - Flat Fillister Head, Drilled Shank .375-24
• AN-148551 - Bolt - Socket Head, 6-Hole Drilled, .190-32 (See an-148551 - 148650)
• AN-148651 - Bolt - Socket Head, 6 Holes Drilled, .250-28 (See an-148551 - 148750)
• AN-148651 - 148750 - Bolt - Socket Head, 6 Holes Drilled, .250-28
• AN-148751 - Bolt - Socket Head, 6 Holes Drilled, .3125-24 (See: an-148751 - 148850) (Use ms-9090)
• AN-148751 - 148850 - Bolt - Socket Head, 6 Holes Drilled, .3125-24
• AN-148851 - Bolt - Socket Head, 6 Holes Drilled, .375-24 (See an-148851 - 148950)
• AN-148851 - 148950 - Bolt - Socket Head, 6 Holes Drilled, .375-24
• AN-148951 - Bolt - Socket Head, 6 Holes Drilled, .4375-20 (Inactive) (See an-148951 - 149050)
• AN-148951 - 149050 - Bolt - Socket Head, 6 Holes Drilled, .4375-20
• AN-149051 - Bolt - Socket Head, 6 Holes Drilled, .500-20 (Inactive) (See an-149051 - 149150)
• AN-149051 - 149150 - Bolt - Socket Head, 6 Holes Drilled, .500-20
• AN-149151 - Bolt - Socket Head, 6 Holes Drilled, .5625-18
• AN-149251 - Bolt - Socket Head, 6 Holes Drilled, .625-18 (See: an-149251 - 149350)
• AN-149251 - 149350 - Bolt - Socket Head, 6 Holes Drilled, .625-18
• AN-173 - 186 - Bolt - Machine, Close Tolerance, Aircraft
• AN-21 - 37 - Bolt - Clevis
• AN-3 - 20 - Bolt - Machine, Aircraft
• AN-42 - 49 - Bolt, Eye
• AN-501 - Screw, Machine, Fillister Head, Fine Thread
• AN-555 - Bolt - Shoulder, Anchor Light Mounting (Cancelled, 1990, No Superseding Document)
• AN-65 - Bolt - Hexagon Head, Coarse Thread (Cancelled, No Superseding Document)
• AN-73 - Bolt, Machine, Aircraft, Drilled Head (Use MS-20073 and MS-20074) (Cancelled, No Superseding Document)
• AN-775 - Bolt - Fluid Passage
• ANSI-B18.5 - Round Head Bolts (Inch Series)
• AS-3099 - Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .190-32 UNJF-3A
• AS-3100 - Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .250-28 UNJF-3A
• AS-3101 - Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
• AS-3102 - Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .375-24 UNJF-3A
• AS-3103 - Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .4375-20 UNJF-3A
• AS-3104 - Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .500-20 UNJF-3A
• AS-3109 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres AMS5731 (Uns S66286), .3125-24 UNJF-3a
• AS-3110 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres AMS5731 (Uns S66286), .3750-24 UNJF-3a
• AS-3112 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .500-20 UNJF-3A
• AS-3113 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres AMS5731 (Uns S66286), .5625-18 UNJF-3a
• AS-3115 - Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres AMS5731, .250-28 UNJF-3a
• AS-3117 - Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, AMS5731, Uns S66286, .375-24 UNJF-3a
• AS-3147 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi, .1900-32 UNJF-3a
• AS-3148 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi, .2500-28 UNJF-3a
• AS-3149 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi, .3125-24 UNJF-3a
• AS-3150 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi .3750-24 UNJF-3a
• AS-3151 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi, .4375-20 UNJF-3a
• AS-3152 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi, .5000-20 UNJF-3a
• AS-3153 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS4967 (Uns R56400), 160 Ksi, .5625-18, UNJF-3a
• AS-3156 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A
• AS-3157 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A
• AS-3158 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A
• AS-3159 - Bolt, Machine - Double Hexagon Extended Washer Hd, Drilled, Close Tolerance Shank, TI Alloy, UNS R56400, 160 ksi Min .3750-24, UNJF-3A
• AS-3160 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A
• AS-3161 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .500-20 UNJF-3A
• AS-3162 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A
• AS-3232 - Bolt, Tee Head - Chamfered AMS5708 (Uns N07001), 165 Ksi Min Uts .1900-32-UNJF-3a
• AS-3233 - Bolt, Tee Head - Chamfered, Pd Shank, Nickel Alloy, 165 Ksi Min Uts .2500-28 UNJF-3a
• AS-3234 - Bolt, Tee Head - Chamfered, Pd Shank Nickel Alloy (Uns N07001), 165 Ksi Min Uts .3125-24 UNJF-3a
• AS-3235 - Bolt, Tee Head - Chamfered, Pd Shank Nickel Alloy (Uns N07001),165 Ksi Min Uts .3750-24 UNJF-3a
• AS-3236 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .1900-32 UNJF-3A
• AS-3237 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Nickel Alloy, Uns N07718, 185 Ksi Min, .2500-28 UNJF-3a
• AS-3238 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Nickel Alloy Uns N07718, 185 Ksi Min, .3125-24 UNJF-3a
• AS-3239 - BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
• AS-3240 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Nickel Alloy, Uns N07718, 185 Ksi Min, .4375-20 UNJF-3a
• AS-3241 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .5000-20 UNJF-3A
• AS-3242 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .5625-18 UNJF-3A
• AS-3243 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi UTS min, .1900-32 UNJF-3A
• AS-3244 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Nickel Alloy, UNS N07718, 185 ksi Min UTS, .2500-28 UNJF-3A
• AS-3245 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Nickel Alloy, Uns N07718, 185 Ksi Min, .3125-24 UNJF-3a
• AS-3246 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Nickel Alloy, Uns N07718, 185 Ksi Min, .3750-24 UNJF-3a
• AS-3247 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Nickel Alloy, Uns N07718, 185 Ksi Min, .4375-20 UNJF-3a
• AS-3248 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Nickel Alloy, UNS N07718, 185 ksi Min, .5000-20 UNJF-3A
• AS-3249 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Nickel Alloy, Uns N07718, 185 Ksi Min, .5625-18 UNJF-3a
• AS-3250 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .1900-32 UNJF-3A
• AS-3251 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .2500-28 UNJF-3A
• AS-3252 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .3125-24 UNJF-3A
• AS-3253 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Nickel Alloy, Uns N07718, 185 Ksi Min, .3750-24 UNJF-3a
• AS-3254 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Nickel Alloy, Uns N07718, 185 Ksi Min, .4375-20 UNJF-3a
• AS-3255 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Nickel Alloy, Uns N07718, 185 Ksi Min, .5000-20 UNJF-3a
• AS-3256 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Nickel Alloy, Uns N07718, 185 Ksi Min, .5625-18 UNJF-3a
• AS-3303 - Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .190-32 UNJF-3A
• AS-3307 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5708, .250-28 UNJF-3a
• AS-3308 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5708, .3125-24 UNJF-3a
• AS-3309 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5708, .375-24 UNJF-3a
• AS-3400 - Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .190-32 UNJF-3A
• AS-3401 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A
• AS-3402 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .3125-24 UNJF-3A
• AS-3403 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, AMS5708 (Uns N07001), .3750-24 UNJF-3a
• AS-3404 - Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, AMS5708 (Uns N07001), .1900-32 UNJF-3a
• AS-3405 - Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .250-28 UNJF-3A
• AS-3406 - Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, AMS5708 (Uns N07001), .3125-24 UNJF-3a
• AS-3407 - Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .375-24 UNJF-3A
• AS-3409 - Bolt, Tee Head - AMS5662, Chamfered, PD Shank, .1900-32 UNJF-3A (Stress Rupture Resistant)
• AS-3410 - Bolt, Tee Head - AMS5662, Chamfered, .250-28 UNJF-3A (Stress Rupture Resistant)
• AS-3411 - Bolt, Tee Head, AMS5662, Chamfered, .3125-24 UNJF-3A (Stress Rupture Resistant)
• AS-3412 - Bolt, Tee Head - AMS5662, Chamfered, .375-24UNJF-3A (Stress Rupture Resistant)
• AS-3413 - Bolt, Machine - Hexagon Head, Pd Shank Uns N07718, 185 Ksi, .1900-32 UNJF-3a (Stress Rupture Resistant)
• AS-3414 - Bolt, Machine - Hexagon Head, Pd Shank Uns N07718, 185 Ksi, .2500-28 UNJF-3a (Stress Rupture Resistant)
• AS-3415 - Bolt, Machine - Hexagon Head, Pd Shank Uns No7718, 185 Ksi Min, .3125-24 UNJF-3a (Stress Rupture Resistant)
• AS-3416 - Bolt, Machine - Hexagon Head, Pd Shank Uns No7718, 185 Ksi Min, .3750-24 UNJF-3a (Stress Rupture Resistant)
• AS-3417 - Bolt, Machine, Double Hex Extended Washer Head, Close Tolerance Shank, UNS N07718, .1900-32 UNJF-3A (Stress Rupture Resistant)
• AS-3418 - Bolt, Machine, Double Hex, Ext Washer Head, Close Tol. Shank, Uns N07718, 185 Ksi Min, .2500-28UNJF-3a (Stress Rupture Resistant)
• AS-3419 - Bolt, Machine,Double Hex, Ext Washer Head, Close Tol. Shank, Uns N07718, 185 Ksi Min .3125-24 UNJF-3a (Stress Rupture Resistant)
• AS-3420 - Bolt, Machine, Double Hex Ext Washer Head, Close Tolerance Shank, UNS N07718, .3750-24 UNJF-3A (Stress Rupture Resistant)
• AS-3528 - Bolt, Shear - Double Hex Head, Uns S66286 - 160 Ksi
• AS-3530 - Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Uns S66286 - 160 Ksi
• AS-3531 - Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Drilled Head, Uns S66286 - 160 Ksi
• AS-3532 - Bolt, Shear - Double Hex Head, Drilled Shank Uns N07718 - 185 Ksi
• AS-3574 - Bolt, Shear - Double Hex Head, UNS N07718 - 185 ksi
• AS-3580 - Bolt, Machine - Double Hex Head, Pd Shank, Uns N07718 - 185 Ksi
• AS-3611 - BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN
• AS-3613 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel
• AS-3622 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobal
• AS-3623 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cobalt-Nickel ALlloy, UNS R30159, 260 ksi min
• AS-3650 - Bolt, Machine - Double Hex Extended Washer Head, Reduced Shank, Uns N07718 - 185 Ksi
• AS-4108/1 - T-Bolt, A-286, 1000°F
• AS-4108/2 - T-Bolt, A-286, 1000°F Bushing Head
• AS-4108/3 - Eye Bolt, A-286, 1000°F
• AS-4506 - Bolts & Screws, Steel, Uns S66286, Tensile Strength 160 Ksi, Procurement Specification
• AS-4877 - Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 DegF Procurement Specification
• AS-5443 - Wrenching Element, Spline Drive - Dimensions For
• AS-7454 - Bolts and Screws, Steel, Low Alloy, Heat Resistant, 135,000 psi Tensile Strength, Normalized and Tempered, Roll Threaded
• AS-7459 - Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification (STABILIZED Aug 2015)
• AS-7460 - Bolts and Screws, Titanium Alloy, 6.0Al - 4.0V, Procurement Specification For
• AS-7461 - Bolts and Screws, Titanium Alloy, 6Al-4V, UNS R56400, Fatigue-Rated, Procurement Specification For
• AS-7466 - Bolts and Screws, Nickel Alloy, UNS N07718, Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification
• AS-7467 - Bolts and Screws, Nickel Alloy, UNS N07718, Tensile Strength 185 ksi, Stress Rupture Rated, Procurement Specification
• AS-7468 - Bolts, Cobalt-Chromium-Nickel Alloy, Uns R30035, Tensile Strength 260 Ksi, Procurement Specification
• AS-7469 - Bolts & Screws, Uns N07041 Nickel Alloy, Corrosion & Heat Resistant, 155 Ksi, Procurement
• AS-7471 - Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification
• AS-7472 - Bolts & Screws, Steel, Corrosion Resistant, 125 000 Psi Tensile Strength, Roll Threaded
• AS-7474 - Bolts and Screws, Steel, Corrosion Resistant, UNS S17400 Tensile Strength 140 Ksi Procurement Specification
• AS-7475 - Bolts, Cobalt-Chromium-Nickel Alloy, Uns R30159, Tensile Strength 260 Ksi, Procurement SPE
• AS-7477 - Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification
• AS-7478 - Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification for
• AS-7479 - Bolts and Screws, Steel, UNS S66286, 1650 Deg F Solution Heat Treated, Precipitation Heat Treated Before Roll Threaded
• AS-91101 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Uns S66286, 130 Ksi Min, .1900-32 UNJF-3a
• AS-91111 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 Ksi Min, .2500-28 UNJF-3A
• AS-9112 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 ksi, .3125-24 UNJF-3A
• AS-9158 - Bolt-Machine, Steel, 12 Point Head, .250-28, Black Oxide
• AS-91601 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Black Oxide, Steel, Uns G87400, 125 Ksi Min, .375-24, UNF-3a
• AS-91691 - BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .1900-32 UNF-3A (STABILIZED Jun 2015)
• AS-91701 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .2500-28 UNF-3A (STABILIZED Jun 2015)
• AS-91711 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .3125-24 UNF-3A (STABILIZED Jun 2015)
• AS-91721 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .375-24 UNF-3A (STABILIZED Jun 2015)
• AS-9208 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .1900-32 UNJF-3A (STABILIZED Jun 2015)
• AS-9209 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14765, 195 Ksi Min, .2500-28 UNJF-3A
• AS-9210 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 Ksi Min, .3125-24 UNJF-3A
• AS-9212 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A
• AS-9217 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .190-32 UNJF-3A
• AS-9218 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .2500-28 UNJF-3A (STABILIZED Jan 2012)
• AS-9219 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 ksi Min, .3125-24 UNJF-3A (STABILIZED Oct 2012)
• AS-9283 - Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1900-32 UNJF-3A
• AS-9284 - Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .2500-28 UNJF-3A
• AS-9285 - Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A
• AS-9286 - Bolt, Machine - Hexagon Head, Pd Shank, Black Oxide, Steel Uns g87400, 125 Ksi Min, .3750-24 UNJF-3a
• AS-9294 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Black Oxide, Steel Uns g87400, 125 Ksi Min, .1900-32 UNJF-3a
• AS-9296 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Black Oxide, Steel Uns g87400, 125 Ksi Min, .3125-24 UNJF-3a
• AS-9297 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Black Oxide, Steel Uns g87400, 125 Ksi Min, .3750-24 UNJF-3a
• AS-9397 - Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .1900-32 UNJF-3A
• AS-9398 - Bolt, Tee Head, Chamfered - Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A
• AS-9399 - Bolt, Tee Head - Cadmium Plated, Steel, Uns g87400, 125 Ksimin, Chamfered, .3125-24 UNJF-
• AS-9400 - Bolt, Tee Head - Cadmium Plated, Steel, Uns g87400, 125 Ksi Min, Chamfered, .3750-24 UNJF-3a
• AS-9401 - Bolt, Tee Head - Cadmium Plated, Steel, Uns g87400, 125 Ksi Min, Chamfered, .4375-20 UNJF-3a
• AS-9402 - Bolt, Tee Head - Cadmium Plated, Steel, Uns g87400, 125 Ksi Min, Chamfered, .5000-20 UNJF-3a
• AS-9432 - Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
• AS-9433 - Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
• AS-9434 - Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
• AS-9440 - BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A (STABILIZED Mar 2014)
• AS-9441 - BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A (STABILIZED Jan 2014)
• AS-9442 - Bolt, Machine - Hexagon, Drilled, 6 Holes, PD Shank, Nickel Cadmium Plated, Steel UNS K14675, 195 ksi min, .3125-24 UNJF-3A (STABILIZED Aug 2015)
• AS-9444 - BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A (STABILIZED Jan 2014)
• AS-9451 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .1900-32 UNJF-3A (STABILIZED Oct 2015)
• AS-9452 - BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A (STABILIZED Oct 2015)
• AS-9453 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .3125-24 UNJF-3A (STABILIZED Oct 2015)
• AS-9454 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .3750-24 UNJF-3A (STABILIZED Oct 2015)
• AS-9455 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A (STABILIZED Oct 2015)
• AS-9456 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .5000-20 UNJF-3A (STABILIZED Oct 2015)
• AS-9457 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .5625-18 UNJF-3A (STABILIZED Oct 2015)
• AS-9458 - Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .6250-18 UNJF-3A (STABILIZED Oct 2015)
• AS-9459 - Bolt, Machine - Steel, AMS 6304, Diffused Nickel-Cadmium Plated Hexagon Head, .750-16 UNJF-3A
• AS-9489 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .1900-32 UNJF-3a
• AS-9490 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .250-28 UNJF-3a
• AS-9491 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3125-24 UNJF-3a
• AS-9492 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .375-24 UNJF-3a
• AS-9493 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .4375-20 UNJF-3a
• AS-9494 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .500-20 UNBJF-3a
• AS-9496 - Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .625-18 UNJF-3a
• AS-9500 - Bolt, Machine - Hexagon Head Drilled, 1 Hole, Full Shank, Cres, Uns S66286, 130 Kis Min, .1900-32 UNJF-3a
• AS-9501 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank Cres, Uns S66286, 130 Ksi Min, .2500-28 UNJF-3a
• AS-9502 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, Uns S66286, 130 Ksi Min, .3125-24 UNJF-3a
• AS-9503 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, Uns S66286, 130 Ksi Min, .3750-24 UNJF-3a
• AS-9505 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, Uns S66286, 130 Ksi Min, .5000-20 UNJF-3a
• AS-9518 - Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1900-32 UNJF-3A (STABILIZED Jun 2015)
• AS-9520 - Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3125-24 UNJF-3A (STABILIZED Jun 2015)
• AS-9521 - Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3750-24 UNJF-3A (STABILIZED Jun 2015)
• AS-9522 - Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .4375-20 UNJF-3A (STABILIZED Jun 2015)
• AS-9523 - Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .5000-20 UNJF-3A (STABILIZED Jul 2015)
• AS-9524 - Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .5625-18 UNJF-3A (STABILIZED Jul 2015)
• AS-9525 - Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .6250-18 UNJF-3A (STABILIZED Nov 2016)
• AS-9526 - Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .7500-16 UNJF-3A (STABILIZED Jul 2015)
• AS-9529 - Bolt, Machine - Steel Uns g87400 Cadmium Plate, Drilled, 1 Hole Hexagon Head, 1900-32 UNJF-3a
• AS-9530 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .2500-28 UNJF-3A (STABILIZED Aug 2015)
• AS-9532 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel Uns g87400, 125 Ksi Min, .3750-24 UNJF-3a
• AS-9533 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .4375-20 UNJF-3A (STABILIZED Aug 2015)
• AS-9534 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .5000-20 UNJF-3A (STABILIZED Nov 2015)
• AS-9556 - Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
• AS-9557 - Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, Uts 130 Ksi Min, .2500-28 UNJF-3a
• AS-9558 - Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .3125-24 UNJF-3A
• AS-9559 - Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .3750-24 UNJF-3A
• AS-9565 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S66286, 130 ksi Min .1900-32 UNJF-3A
• AS-9566 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .2500-28 UNJF-3a
• AS-9567 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, 130 Ksi Min, .3125-24 UNJF-3a
• AS-9568 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S66286, 130 ksi min .3750-24 UNJF-3A
• AS-9574 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .1900-32 UNJF-3a
• AS-9575 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .2500-28 UNJF-3a
• AS-9576 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3125-24 UNJF-3a
• AS-9577 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, UNS S66286, Silver Plated, .375-24 UNJF-3A
• AS-9579 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .5000-20 UNJF-3a
• AS-9583 - Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, Uns S66286, 130 Ksi Min, .1900-32 UNJF-3a
• AS-9584 - Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
• AS-9585 - Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, Uns S66286, 130 Ksi Min, .3125-24 UNJF-3a
• AS-9586 - Bolt, Machine-Hexagon Drilled, 6 Holes, Full Shank, Corrosion and Heat Resistant Steel, UNS S66286, 130 Ksi Min, .3750-24 UNJF-3A
• AS-9587 - Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .4375-20 UNJF-3A
• AS-9588 - Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, Uns S66286, 130 Ksi Min, .5000-20 UNJF-3a
• AS-9589 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, Corrosion and Heat Resistant Steel (Uns S66286), .5625-18 UNJF-3a
• AS-9633 - Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS4967 (UNS R56400), .190-32 UNJF-3A
• AS-9638 - Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS4967 (UNS R56400), .500-20 UNJF-3A
• AS-9676 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cup Washer Locked, Cres, Un
• AS-9677 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cup Washer Locked, Cres, Uns S66286, 130 Ksi Min, .2500-28 UNJF-3a
• AS-9678 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cup Washer Locked, Cres, Un
• AS-9679 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cup Washer Locked, Cres, Un
• AS-9680 - BOLT, MACHINE - DOUBLE HEX, EXTENDED WASHER HD, PD SHANK, CUP WASHER LOCKED, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A (STABILIZED Oct 2014)
• AS-9681 - BOLT, MACHINE - DOUBLE HEX, EXTENDED WASHER HD, PD SHANK, CUP WASHER LOCKED, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A (STABILIZED Sep 2014)
• AS-9685 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel , Uns K14675, Diffused Nick
• AS-9686 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel, Uns K14675, Diffused Nicke
• AS-9687 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel, Uns K14675, Diffused Nickel-Cadmium Plate, 195 Ksi Min, .3125-24 UNJF-3a
• AS-9696 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .1900-32 UNJF-3A
• AS-9697 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .2500-28 UNJF-3A
• AS-9698 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Corrosion & Heat Resistant
• AS-9699 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Corrosion & Heat Resistant
• AS-9705 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Nickel Alloy, .1900-32 UNJF-3a
• AS-9714 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Nickel Alloy UNS N07001, .190-32 UNJF-3A
• AS-9715 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Nickel Alloyl, .2500-28 UNJF-3A
• AS-9716 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3A
• AS-9724 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, Uns No7001, 165 Ksi Min, .2500-28 UNJF-3a
• AS-9732 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS5643, .1900-32 UNJF-3a
• AS-9733 - Bolt, Machine-Double Hexagon, Extended Washer Head, PD Shank, Cres AMS 5643, .2500-28 UNJF-3A
• AS-9734 - Bolt, Machine-Double Hexagon, Extended Washer Head, Pd Shank, Cres AMS5643, .3125-24 UNJF-3a
• AS-9741 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S17400, 140 ksi min .1900-32 UNJF-3A
• AS-9742 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres AMS 5643, .2500-28 UNJF-3A
• AS-9750 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, AMS4967 (Ti 6Al - 4V), .1900-32 UNJF-3a
• AS-9751 - Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Titanium Ams 4967, .250-28 Unjf-3a
• AS-9759 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank AMS4967 (Ti 6al-4V), .1900-32 UNJF-3a
• AS-9760 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .250-28 Unjf-3a
• AS-9761 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .3125-24 Unjf-3a
• AS-9783 - Bolt, Machine - Hexagon Head, Full Shank, Corrosion Resistant Steel (Uns S17400), .1900-32 UNJF-3a
• AS-9784 - Bolt, Machine - Hexagon Head, Full Shank, Corrosion Resistant Steel (Uns S17400), .2500-28 UNJF-3a
• AS-9785 - Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .3125-24 UNJF-3A
• AS-9786 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .375-24 UNJF-3A
• AS-9788 - Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .500-20 UNIF-3A
• AS-9790 - Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .625-18 UNJF-3A
• AS-9796 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Ams 5643, .3125-24 Unfj-3a
• AS-9805 - Bolt, Machine-Hexagon Head, PD Shank, AMS 5643, .190-32 UNJF-3A
• AS-9806 - Bolt, Machine - Hexagon Head, PD Shank, AMS 5643, .250-28 UNJF-3A
• AS-9808 - Bolt, Machine-Hexagon Head, PD Shank, AMS 5643, .375-24 UNJF-3A
• AS-9816 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS5643, .190-32 UNJF-3A
• AS-9821 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS5643, .500-20 UNJF-3a
• AS-9885 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Corrosion and Heat Resistant Steel, Uns S41800, 140 Ksi Min, .1900-32 UNJF-3a
• AS-9887 - Bolt, Machine-Double Hexagon Extended Washer Head, PD shank AMS 5616, .3125-24 UNJF-3A (STABILIZED Jul 2012)
• AS-9890 - Bolt, Machine - Double Hexagon Extended Washer Head, Cres Uns S41800, .5000-20 Unjf
• AS-9894 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, AMS5616, .190-32 UNJF-3a
• AS-9895 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .2500-28 UNJF-3A
• AS-9914 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .190-32 UNJF-3A (STABILIZED Oct 2012)
• AS-9916 - Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .3125-24 UNJF-3A
• AS-9917 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS6322, Cadmium Plated, .3750-24 UNJF-3a
• AS-9918 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel SAE 8740, Cadmium Plated, 125 Ksi Min. Uts, .4375-20 UNJF-3a
• AS-9923 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cadmium Plated, Steel, Uns g87400, 125 Ksi Min, .1900-32 UNJF-3a
• AS-9924 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A
• AS-9928 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cadmium Plated, Steel, Uns g87400, 125 Ksi Min, .5000-20 UNJF-3a
• AS-9933 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .250-28 UNJF-3A (STABILIZED Oct 2012)
• AS-9944 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS6322, Cadmium Plated, .3750-24 UNJF-3A (STABILIZED Aug 2014)
• AS-9947 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .5625-18 UNJF-3A
• AS-9958 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .2
• AS-9964 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS6322, Cadmium Plated, .625-18 UNJF-3a
• CSA-ISO/IEC-11573 - Information Technology - Telecommunications and Information Exchange Between Systems - Synchronization Methods and Technical Requirements for Private Integrated Services Networks (Adopted ISO/IEC 11573:1994)
• DOD-B-63475 - Bolt, Shoulder, Hexagon Head, General Specification for, Metric
• DOD-B-63475/1 - Bolt, Shoulder, Hexagon Head, Long Thread, Metric
• DOD-B-63475/2 - Bolt, Shoulder, Hexagon Head, Short Thread, Metric
• DOD-B-63545 - Bolt, Ribbed Shoulder, Wheel Mounting, Metric General Specification for
• DOD-B-63545/1 - Bolt, Ribbed Shoulder Wheel Mounting, Metric
• DOD-B-63545/2 - Bolt, Ribbed Shoulder, Extended Shoulder, Wheel Mounting, Metric
• DOD-B-70331 - Bolt, Self Locking, Hexagon Head, Steel, Metric, General Specification For
• DOD-B-70331/1 - Bolt, Self Locking, Hexigon Head, Steel, SAE J1199 (10.9) Type B, Metric
• DOD-B-70331/2 - Bolt, Self Locking, Hexagon Head, Steel, SAE J1199 (10.9) Type Bh, Metric
• DS-51417 - Bolt, Machine, Hex Head Fully Threaded, Fine Thread, Metric
• FF-B-186 - Bearings, Roller +Canc, 7/1/60, Superseded By FF-B-185
• FF-B-561 - Bolts, (Screw), Lag
• FF-B-575 - Bolt, Hexagon and Square
• FF-B-584 - Bolts, Finned Neck, Key Head, Machine, Ribbed Neck, Square Neck, Tee Head
• FF-B-588 - Bolt, Toggle: & Expansion Sleeve, Screw
• MA-1566 - Gaging Practice and Gage Requirements for MJ Metric Screw Threads
• MA-3286 - Bolt, Machine - Hexagon Head, PD Shank, MJ Thread, Corrosion and Heat Resistant Steel, UNS S66286, 90 MPa Min, Metric
• MA-3287 - Bolt, Machine - Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric
• MA-3289 - Bolt, Machine-Hex Head-Pd Shank Mj Thread, AMS 6322, Cadmium Plate, Metric
• MA-3304 - Bolt-Machine, Hex Head, Drilled, Pd Shank, Mj Thread, AMS 6322, Cadmium Plate, Metric
• MA-3338 - Bolt, Machine-Hex Head, Pd Shank, Long Thread, AMS-5662, Metric
• MA-3339 - Bolt, Machine-Spline Extended Washer, Pd Shank, Long Thread, AMS-6322, Cadmium Plated,
• MA-3342 - Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS-5731, Metric
• MA-3343 - Bolt, Machine-Spline Drive Extended Washer, Full Shank, Longthread, AMS 5662, Metric
• MA-3347 - Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731, Metric
• MA-3348 - Bolt, Spline Drive Extended Washer Head, Pd Shank, Long Thread, AMS 5708, Metric
• MA-3365 - Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread,AMS 5731, Metric
• MA-3366 - Bolt, Machine - Spline Drive Extended Washer, Drilled Head,Full Shank, Long Thread, AMS
• MA-3367 - BOLT, MACHINE - SPLINE DRIVE HEAD, DRILLED, PD SHANK - LONG THREAD AMS6322, CADMIUM PLATED, METRIC (STABILIZED Aug 2014)
• MA-3368 - Bolt, Machine-Spline Extended Washer, Pd Shank, Long Thread,Drilled, AMS 5662, Metric
• MA-3369 - Bolt, Machine-Hex Head, Drilled, Pd Shank, Long Thread, AMS5662, Metric
• MA-3371 - Bolt, Spline Drive Extended Washer Head, Drilled, Pd Shank,Long Thread, AMS 5708, Metric
• MA-3374 - Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric
• MA-3376 - Bolts and Screws, UNS G87400 Tensile Strength 860 MPa and 1000 MPa Procurement Specification, Metric
• MA-3377 - Bolts & Screws, Nickel Alloy Uns N07718, Tensile Strength 1275 Mpa, Procurement Specificat
• MA-3378 - Bolts and Screws, UNS N07001, Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric
• MA-3398 - Bolt, Machine-Hex Head-Drilled, Pd Shank, Long Thread, AMS 5731, Metric
• MA-3446 - Bolt, Machine - Tee Head, Chamfered, Classification: 1210 Mpa/730 Degrees C, Close Toleran
• MA-3476 - Bolt, Machine - Spline Extended Washer, Full Head, Pd Shank,Long Thread, AMS 5662 - Metri
• MA-3513 - Bolt, Machine - Spline Drive Extended, Washer Hhead, PD Shank, Long Thread, UNS N07001, Metric
• MA-4147 - Bolt, Spline Drive, Extended Washer, Reduced Shank, AMS 5662, Metric
• MA-4189 - Screw, Machine, 100 Degrees Csk, Flat Head, Offset Cruciform Recess, Full Shank, Uns S
• MIL-B-15382 - Bolt, Firebrick Anchor
• MIL-B-18695 - Bolts and Nuts, Plow, Pole Line, Hook, and Shoulder (Superseded by MIL-H-55053)
• MIL-B-23964 - Bolt, Self-Retaining, Positive Locking (Superseded by NASM-23964)
• MIL-B-2938 - Bolts and Nuts, Deck
• MIL-B-30504 - Bolt, Suspension, Airdrop
• MIL-B-3964 - Bolts and Nuts, Track (Superseded by ANSI B18.10)
• MIL-B-45908 - Bolt, Eye, General Specification for (Superseded by NASM-45908)
• MIL-B-45912 - Bolt, Self-Locking, Hexagon Head, Steel
• MIL-B-52796 - Bolts, Ribbed Neck, Structural Type, With Recessed Locknut (No Superseding Document)
• MIL-B-6461 - Bolts, Aircraft Engine and Propeller
• MIL-B-6812 - Bolts, Aircraft (Superseded by NASM-6812)
• MIL-B-70332/2 - Bolt, Shouldered (Bolt Assembly, Clamp) (No Superseding Document)
• MIL-B-7838 - Bolt, Internal Wrenching, 160 KSI FTU (Superseded by NASM-7838)
• MIL-B-7874 - Bolt, Machine, 1200 Degrees F (Superseded by NASM-7874)
• MIL-B-83050 - Bolt, Self-Retaining, Impedance Type (Superseded by NASM-83050)
• MIL-B-85604 - Bolt, Nickel Alloy 718, Tension, High Strength, (125 Ksi Fsu and 220 Ksi Ftu) High Temperature, Spline Drive, General Specification for (Superseded by NASM-85604)
• MIL-B-85667 - Bolt, Sleeve, Straight Shank, Protruding and Flush Head, General Specification for
• MIL-B-85667/1 - Bolt, Sleeve, Straight Shank, Protruding and Flush Head, Reliability and Maintainability Requirements for
• MIL-B-85667/10 - Bolt, Sleeve, 100 Degrees Tension Flush Head, Straight Shank, CRES 304 Sleeve, CRES A-286 Pin, 160 KSI FTU, 450 Degrees F
• MIL-B-85667/11 - Bolt, Sleeve, 100 Degrees Tension Flush Head, Straight Shank, Nickel-CRES 304 Sleeve, Nickel-Alloy 718 Pin, 220 KSI FTU, 450 Degrees F
• MIL-B-85667/12 - Bolt, Sleeve, 100 Degree Tension Flush Head, Straight, Shank, CRES 304 Sleeve, Titanium Alloy Pin, 95 KSI FSU, 160 KSI FTU
• MIL-B-85667/13 - Bolt, 100 Degrees Tension Flush Head, Straight Shank, Aluminum Alloy Sleeve, Titanium Alloy Pin, 95 KSI FSU, 160 KSI FTU
• MIL-B-85667/2 - Bolt, Sleeve, 100 Degree Reduced Flush Head, Straight Shank, CRES 304 Sleeve, CRES PH 13-8MO Pin, 125 KSI FSU
• MIL-B-85667/3 - Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, CRES PH 13-8MO Pin, 220 KSI FSU
• MIL-B-85667/4 - Bolt, Sleeve, 100 Degrees Reduced Flushed Head, Straight Shank, Titanium Alloy Pin, 95 KSI FSU
• MIL-B-85667/5 - Bolt, Sleeve, Protruding Head, Straight Shank, Titanium Alloy Pin, 160 Ksi Ftu
• MIL-B-85667/6 - Bolt, Sleeve, 100 Degrees Reduced Flushed Head, Straight Shank, CRES 304 Sleeve, Nickel Alloy 718 Pin, 125 KSI FSU, 450 Degrees F
• MIL-B-85667/7 - Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, Nickel Alloy 718 Pin, 125 KSI FSU, 220 KSI FTU, 450
• MIL-B-85667/8 - Bolt, Sleeve, 100 Degrees Reduced Flush Head, Straight Shank, CRES 304 Sleeve, CRES A-286 Pin, 95 KSI FSU, 450 Degrees F
• MIL-B-85667/9 - Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, CRES A-286 Pin, 95 KSI FSU, 160 KSI FTU, 450 Degrees F
• MIL-B-857 - Bolt, Nuts, and Studs (Superseded by MIL-DTL-1222)
• MIL-B-87114/1 - Bolts, 100 Deg. Head, Ribbed-TORQ-Set Recess, Close Tolerance, Alloy Steel, Long Thread, 95 Ksi Fsu (No Superseding Document)
• MIL-B-87114/2 - Bolts, 100 Deg. Reduced Dome Head, Ribbed-TORQ-Set Recess, Close Tolerance, Alloy Steel, Long Thread, 95 Ksi Fsu (No Superseding Document)
• MIL-B-87114/3 - Bolt, Pan Head, Ribbed-TORQ-Set Recess, Close Tolerance, Alloy Steel, Long Thread, 95 Ksi Fsu (No Superseding Document)
• MIL-B-8831 - Bolt, 180 Ksi Ftu and 180 Ksi Fsu, 450 Deg F Protruding and Flush Head, General Specification for (Superseded by NASM-8831)
• MIL-B-8831/1 - Bolt, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, Reliability and Maintainability Requirements For
• MIL-B-8831/2 - Bolt, 100 Deg Reduced Flush Head, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 108 Ksi Fsu
• MIL-B-8831/3 - Bolt, Protruding Head, External Wrenching, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 180 Ks1 Ftu
• MIL-B-8831/4 - Bolt, 100 Deg Reduced Flush Head, Low Interference, Straight Shank, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 108 Ksi Fsu
• MIL-B-8831/5 - Bolt, Protruding Head, External Wrenching, Straight Shank, Low Interference, Expandable Aluminum Alloy Sleeve, Alloy Steel Pin, 180 Ksi Ftu
• MIL-B-8906 - Bolt, Alloy Steel, Shear and Tensile, (132 Ksi Fsu and 220 Ksi Ftu), 450 Deg. F, Spline Drive, General Specification for (Superseded by NASM-8906)
• MIL-B-8906/2 - Bolts, Shear, Steel, 132 KSI FSU, 450 Degrees F (Superseded by NASM-8906/2)
• MIL-B-8907 - Bolt, Alloy Steel, Shear and Tensile (156 KSI FSU and 260 KSI FTU, 450 Degrees F) External Wrenching, Flanged Head (Superseded by NASM-8907)
• MIL-DTL-15382 - Bolt, Firebrick Anchor
• MIL-DTL-45912 - Bolt, Self-Locking, Hexagon Head, Steel
• MIL-DTL-85667/12 - Bolt, Sleeve, 100 Degrees Tension Flush Head, Straight Shank, CRES 304 Sleeve, Titanium Alloy Pin, 95 KSI FU, 160 KSI FTU (No Superseding Document)
• MIL-DTL-85667/3 - Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, CRES PH 13-8MO Pin, 220 KSI FSU
• MIL-DTL-85667/5 - Bolt, Sleeve, Protruding Head, Straight Shank, Titanium Alloy Pin, 160 KSI FTU
• MIL-DTL-85667/7 - Bolt, Sleeve, Protruding Head, Straight Shank, CRES 304 Sleeve, Nickel Alloy 718 Pin, 125 KSI FSU, 220 KSI FTU, 450
• MIL-P-23470 - Pin-Rivet, Threaded and Collar,Pin-Riv Et, Threaded, Torque Controlled, Pre--Stress,Self-Locking, General Specification for (No Superseding Document)
• MIL-P-23470/1 - Pin Rivet, Threaded, Button Head, Straight Shank, Corrosion Resistant Steel (No Superseding Document)
• MIL-P-23470/14 - Pin-Rivet, Button Head, Straight Shank, Aluminum Alloy(No Superseding Document)
• MIL-STD-1251 - Screw and Bolts Preferred for Design, Listing of (No Superseding Document)
• MS-14157 - Bolt, Wheel, Tension, Flanged Steel, 180Ksi Ftu, 450 Deg. F External Spline Drive (Superseded by NASM-14157)
• MS-14163 - Bolt, Wheel, Tension, Steel 220 Ksi, Ftu, 450 Deg. F External Wrenching, Spline Drive, Flanged Head (Use NASM-14490)
• MS-14181 - Bolt, Tension, Nickel Alloy 718, 220 Ksi Ftu, External Wrenching, Spline Drive, Flanged Head (Superseded by NASM-14181)
• MS-14490 - Bolt, Wheel, Nickel Alloy 718, 220 Ksi Ftu, 132 Ksi Fsu, 450 Deg. F, External Wrenching, Spline Drive, Flanged Head (Superseded by NASM-14490)
• MS-15601 - Lamp, Incandescent, a 19, Medium Screw (Superseded by ms-15586)
• MS-15992 - Bolt-Self-Locking, 250 Deg F
• MS-15993 - Bolt-Self-Locking, 250 Deg. F.
• MS-15994 - Bolt-Self-Locking, 250 Deg. F.
• MS-15995 - Bolt-Self-Locking, 250 Deg. F.
• MS-15996 - Bolt-Self-Locking, 250 Deg. F.
• MS-15997 - Bolt-Self-Locking, 250 Deg. F.
• MS-15998 - Bolt-Self-Locking, 250 Deg. F.
• MS-15999 - Bolt-Self-Locking, 250 Deg. F.
• MS-16000 - Bolt-Self-Locking, 250 Deg. F.
• MS-16001 - Bolt-Self-Locking, 250 Deg. F.
• MS-16002 - Bolt-Self-Locking, 250 Deg. F.
• MS-16003 - Bolt-Self-Locking, 250 Deg. F.
• MS-16004 - Bolt-Self-Locking, 250 Deg. F.
• MS-16201 - Bolts, Lag, Cone Point, Countersunk Flathead, Slotted, Copper-Silicon Alloy, Nonmagnetic
• MS-16202 - Bolts, Lag, Square Bolt Head, Gimlet or Cone Point, Corrosion-Resisting Steel, Non-Magnetic
• MS-16204 - Bolt, Finned Neck, Countersunk Flathead, UNC-2a, Non-Magnetic
• MS-16205 - Bolts, Machine, Regular Semi-Finished Hexagon Head, Copper-Silicon Alloy (Silicon Bronze), UNC-2a, Non-Magnetic (Superseded by NASM-16205)
• MS-16206 - Bolts, Machine, Hexagon Head, Regular Semi-Finished, Aluminum Alloy, UNC-2a Nonmagnetic (Superseded by NASM-16206)
• MS-16207 - Bolts, Square Neck, (Carriage Bolt), Round Head, UNC-2a, Copper-Silicon Alloy, Nonmagnetic
• MS-16208 - Bolts, Machine, Hexagon Head, Semifinished Corrosion Resisting Steel UNC-2a, Nonmagnetic (Superseded by NASM-16208)
• MS-16209 - Bolts, Lag, Square Bolt Head, Copper Silicon Alloy, Gimlet or Cone Point, Nonmagnetic (Use ms-16992)
• MS-16230 - Bolt, Lag, Square Head, Silicon Bronze, Gimlet Point
• MS-16231 - Blt, Lag, Square Head, Carbon Steel Uncoated, Gimlet Point
• MS-16232 - Bolt, Lag, Square Head, Carbon Steel Zinc or Cadmium Coated, Gimlet Point
• MS-16233 - Bolt, Lag, Square Head, Corrosion Resisting Steel, Gimlet Point
• MS-16992 - Screw, Lag (Bolt), Hex Head, Gimlet Point (No Superseding Document)
• MS-18115 - Bolts, Self Retaining, Positive Locking, Steel 75 Ksi, Fsu, 125 Ksi Ftu, Hex, Slotted Head, 450 Deg. F (Superseded by ms-3369)
• MS-20004 - BOLTS, INTERNAL WRENCHING, 160 KSI FTU and 96 KSI FSU
• MS-20033 - 20046 - Bolt, Machine, Hexagon Had, 1200 Degrees F
• MS-20069 - Bolt, Square Neck, Carriage, Hot Galvanized (Pole Line)
• MS-20070 - Bolt Eye, (Lag Screw Thread) (No Superseding Document)
• MS-20071 - Bolt, Eye, Double Arming (for Poleline Use)
• MS-20072 - Bolt, Eye, Oval
• MS-20073 - Bolt, Machine, Aircraft, Drilled Head, Fine Thread (Superseded by NASM-20073)
• MS-20074 - Bolt, Machine, Aircraft, Drilled Head, Coarse Thread (Superseded by NASM-20074)
• MS-21091 - Bolt, Self-Locking, 250 Deg. F., Steel, 75 Ksi Fsu, 125 Ksi Ftu, 100 Deg. Flash Head Cross Recessed
• MS-21092 - Bolt, Self-Locking, 250 Deg. F, Cres, 48 Ksi Fsu, 80 Ksi Ftu, 100 Deg. Flush Head, Cross Recessed
• MS-21094 - Bolt, Self-Locking, 250 Deg.F., Steel, 75 Ksi Fsu, 125 Ksi Ftu, Hex Head (Superseded by NASM-21094)
• MS-21095 - Bolt, Self-Locking, 250 Deg. F, Cres, 48 Ksi Fsu, 80 Ksi Ftu, Hex Head (Superseded by NASM-21095)
• MS-21096 - Bolt, Self-Locking, 75 Ksi Fsu, 125 Ksi Ftu Pan Head, Cross Recessed (Superseded by NASM-21096)
• MS-21097 - Bolt, Self-Locking, 250 Deg. F, Cres, 48 Ksi Fsu, 80 Ksi Ftu, Pan Head, Cross Recessed (Superseded by NASM-21097)
• MS-21098 - Bolt, Self.Locking, Steel, 160 Ksi, Ftu 250 Deg. F, 12 Point, External Wrenching (Externally Wrenching Cap Screws) (Superseded by NASM-21098)
• MS-21099 - Bolt, Self Locking, Corrosion Resisting Steel, 80 Ksi Ftu, 250 Deg. F, 12-Point, External Wrenching (Externally Wrenching Cap Screws)
• MS-21125 - Bolt, Self Retaining, Positive Locking, Cres 90 Ksi Fsu, 63 Ksi Ftu, Pan Head, 450 Deg. F and 650 Deg. F (Superseded by NASM-21125)
• MS-21130 - Bolt, Self Retaining, Positive Locking, Cres 90 Ksi Fsu, 63 Ksi Ftu, 100 Deg. Flush Head, 450 Deg. F and 650 Deg. F (Superseded by NASM-21130)
• MS-21134 - Bolt, Tension, Steel, 180 Ksi Ftu, 450 Degree F, External Wrenching, Spline Drive, Flanged (Superseded by NASM-21134)
• MS-21250 - Bolt, Tension, Steel, External Wrenching, Flanged, 12-Point, 180 Ksi Ftu, 450 Deg F (Superseded by NASM-21250)
• MS-21277 - Screw, Machine - Steel, Double Hexagon, Extended Washer, .138-40 (MIL-S-8879 Thread) (No Superseding Document)
• MS-21278 - Screw, Machine - Steel, Double Hexagon, Extended Washer, .164-36 (MIL-S-8879 Thread) (No Superseding Document)
• MS-21279 - Bolt, Machine - Steel, Double Hexagon, Extended Washer, .190-32 (MIL-S-8879) (Asg)
• MS-21280 - Bolt, Machine - Steel, Double Hexagon, Extended Washer, .250-28 (MIL-S-8879 Thread)
• MS-21281 - Bolt, Machine - Steel, Double Hexagon, Extended Washer, .3125-24 (MIL-S-8879 Thread)
• MS-21282 - Bolt, Machine - Steel, Double Hexagon, Extended Washer, .375-24 (MIL-S-8879 Thread)
• MS-21283 - Bolt, Machine - Steel, Double Hexagon, Extended Washer, .4375-20 (MIL-S-8879 Thread) (No Superseding Document)
• MS-21284 - Bolt, Machine - Steel, Double Hexagon, Extended Washer, .500-20 (MIL-S-8879 Thread)
• MS-21285 - Bolt, Machine-Steel, Double Hexagon, Extended Washer, .5625-18 (MIL-S-8879 Thread) (Superseded by ms-9571)
• MS-21286 - Screw, Machine - Steel, Drilled Double Hexagon, Extended Washer, .138-40 (MIL-S-8879 Thread) (No Superseding Document)
• MS-21287 - Screw, Machine - Steel, Drilled Double Hexagon, Extended Washer, .164-36 (MIL-S-8879 Thread) (Superseded by NASM-21287)
• MS-21288 - Bolt, Machine - Steel, Drilled Double Hexagon, Extended Washer, .190-32 (MIL-S-8879 Thread)
• MS-21289 - Bolt, Machine-Steel Drilled Double Hexagon Extended Washer, 250-28 (MIL-S-8879 Thread) (No Superseding Document)
• MS-21290 - Bolt, Machine - Steel, Drilled Double Hexagon, Extended Washer, .3125-24 (MIL-S-8879 Thread)
• MS-21291 - Bolt, Machine - Steel, Drilled Double Hexagon, Extended Washer, .375-24 (MIL-S-8879 Thread)
• MS-21292 - Bolt, Machine - Steel, Drilled, Double Hexagon, Extended Washer, .4375-20 (MIL-S-8879 Thread)
• MS-21293 - Bolt, Machine-Steel, Drilled Double Hexagon, Extended Washer, .500-20 (MIL-S-8879 Three
• MS-21294 - Bolt, Machine - Steel, Drilled, Double Hexagon, Extended Washer, .5625-18 (MIL-S-8879 Thread)
• MS-21296 - Bolt, Tension, Steel; 260 Ksi Ftu, 450 Deg. F, External Wrenching, Spline Drive, Flanged Head (Superseded by NASM-21296)
• MS-21297 - Bolt, Tension, Steel, 220 Ksi Ftu, 450 Deg. F, External Wrenching, Spline Drive, Flanged Head (Superseded by NASM-21297)
• MS-21301 - Screw, Shouldered, Hex-Socket Head .375, .500, .625 UNC-3a, Unplated
• MS-27576 - Bolt, Self-Retaining, Impedance Type, 95 Ksi Fsu, Hex Head, 450 Deg. F (Superseded by NASM-27576)
• MS-27950 - Bolt, Eye - Turnbuckle (General Purpose)
• MS-27953 - Bolt, Hook-Turnbuckle (General Purpose) (Superseded by NASM-27953)
• MS-33602 - Bolts, Self-Retaining, Aircraft, Reliability and Maintainability, Design and Usage Requirements for (Superseded by NASM-33602)
• MS-3369 - Bolt, Self Retaining, Positive Locking, Cres 90 Ksi Fsu, 63 Ksi Ftu, Hexagon Slotted Head, 450 Deg. F and 650 Deg F. (Superseded by NASM-3369)
• MS-35355 - Bolt, Machine, Square Head, Steel, Cadmium or Zinc Plated, UNC-2a
• MS-35356 - Bolt, Machine, Square Head, Steel, Phosphate Coated, UNC-2a
• MS-35474 - Bolt, Oval Neck, Track (Superseded by ANSI-B18.10)
• MS-35751 - Bolt, Square Neck, Round Head (Carriage), Steel, Cadmium or Zinc Plated, UNC-2a (Superseded by NASM-35751)
• MS-35752 - Bolt, Square Neck, Truss Head, (Step) Steel, Cadmium or Zinc Plated, UNC-2a (See ms-35751)
• MS-35753 - Bolt, Square Neck, Flat Head, (Elevator) Steel, Cadmium or Zinc Plated, UNC-2a (Use ms-35754)
• MS-35754 - Bolt, Square Neck, Countersunk, (Plow) Steel, Cadmium or Zinc Plated, NC-2a and UNC-2a
• MS-35763 - Bolt, Self-Locking, Hexagon Head, Steel, Grade 5, UNC-2a and UNF-2a
• MS-35764 - Bolt, Self-Locking, Hexagon Head, Steel, Grade 8, UNC-2A and UNF-2A
• MS-35798 - Bolt, Machine, Square Head, Hot Galvanized (Pole-Line)
• MS-35799 - Rod, Continuous Thread, Double Arming, Hot Galvanized, (Poleline)
• MS-35800 - Bolt, Lag, Gimlet Point Hot Galvanized (Pole-Line) (No Superseding Document)
• MS-35801 - Bolt, Lag, Fetter Drive Hot Galvanized (Pole-Line)
• MS-51933 - Bolt Welding Fine Thread
• MS-51934 - Bolt, Welding&Coarse Thread
• MS-51937 - Bolt, Eye, Shoulder UNC-2a and UNF-2a
• MS-51946 - Bolt, Ribbed Shoulder, Single End, Splined, 3/4 Inch
• MS-51947 - Bolt, Ribbed Shoulder. Wheel Mounting Single End, 3/4 Inch, Extended Length
• MS-51948 - Bolt, Ribbed Shoulder, Single End, Spined, 7/16 and 1/2 Inch
• MS-51949 - Bolt, Shoulder, Wheel Mounting, Single End, Keyed Head
• MS-9060 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Drilled, .190-32 Ns
• MS-9061 - Bolt, Machine - Cres AMS 5735, Double Hexagon Extended Washer Head, Drilled, .250-28
• MS-9062 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Drilled, .3125-24 Ns
• MS-9063 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Drilled, .375-24 Ns
• MS-9064 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Drilled, .4375-20 Ns (No Superseding Document)
• MS-9065 - Bolt, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, Drilled, .500-20 Ns (No Superseding Document)
• MS-9066 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Drilled, .5625-18 Ns (No Superseding Document)
• MS-90729 - Bolt, Tee Head
• MS-9088 - Bolt, Machine, Steel, Drilled 12 Point Head, .190 (No. 10)-32 (Cadmium Plate)
• MS-9089 - Bolt-Machine, Drilled 12 Point Head, Steel, .250-28 UNF-3a
• MS-9090 - Bolt Machine, Drilled 12 Point Head, Steel, .3125-24 UNF-3A
• MS-9091 - Bolt-Machine, Drilled 12 Point Head, Steel, .375-24 UNF-3a
• MS-9092 - Bolt-Machine, Drilled 12 Point Head, Steel, .4375-20 UNF-3a
• MS-9093 - Bolt-Machine, Drilled 12 Point Head, Steel, .500-20 UNF-3a
• MS-9094 - Bolt-Machine, Drilled 12 Point Head, Steel, .5625-18 UNF-3a (No Superseding Document)
• MS-9110 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5731 .190-32 UNJF-3a (Superseded by SAE as-91101)
• MS-9111 - BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5731, .250-28 UNJF-3A (Superseded BY SAE AS-91111)
• MS-9112 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5731, .3125-24 UNJF-3a (Superseded by SAE as-9112)
• MS-9113 - Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5731, .375-24 UNJF-3a
• MS-9146 - Bolt, Machine, 12 Point Head, Steel, .190-32 UNF-3a
• MS-9147 - Bolt, Machine, 12 Point Head, Steel, .250-28 UNF-3a
• MS-9148 - Bolt, Machine, 12 Point Head, Steel, .3125-24 UNF-3a
• MS-9149 - Bolt, Machine, 12 Point Head, Steel, .375-24UNF-3a
• MS-9150 - Bolt, Machine, 12 Point Head, Steel, .4375-20 UNF-3a (No Superseding Document)
• MS-9151 - Bolt, Machine, 12 Point Head, Steel, .500-20 UNF-3a (No Superseding Document)
• MS-9152 - Bolt Machine, Steel, 12 Point Head, .5625-18, Cadmium Plate
• MS-9157 - Bolt-Machine, Steel, 12 Point Head, .190 (No. 10)-32, Black Oxide (No Superseding Document)
• MS-9158 - Bolt-Machine, Steel, 12 Point Head, .250-28, Black Oxide (Superseded by SAE as-9158)
• MS-9159 - Bolt-Machine, Steel, 12 Point Head, .3125-24, Black Oxide (No Superseding Document)
• MS-9160 - Bolt-Machine, Steel, 12 Point Head, .375-24, Black Oxide (Superseded by SAE as-91601)
• MS-9161 - Bolt-Machine, Steel, 12 Point Head, .4375-20, Black Oxide (No Superseding Document)
• MS-9162 - Bolt-Machine, Steel, 12 Point Head, .500-20, Black Oxide (No Superseding Document)
• MS-9163 - Bolt-Machine, Steel, 12 Point Head, .5625-18, Black Oxide (No Superseding Document)
• MS-9169 - Bolt-Machine, Steel, Drilled 12 Point Head, .190 (No. 10)-32, Black Oxide (Asg) (Superseded by SAE as-91691)
• MS-9170 - Bolt-Machine, Steel, Drilled 12 Point Head, .250-28, Black Oxide (Asg) (Superseded by SAE as-91701)
• MS-9171 - Bolt-Machine, Steel, Drilled 12 Point Head, .3125-24, Black Oxide (Superseded by SAE as-91711)
• MS-9172 - Bolt-Machine, Steel, Drilled 12 Point Head, .375-24, Black Oxide (Superseded by SAE as-91721)
• MS-9173 - Bolt-Machine, Steel, Drilled 12 Point Head, .4375-20, Black Oxide (Asg) (No Superseding Document)
• MS-9174 - Bolt-Machine, Steel, Drilled 12 Point Head, .500-20, Black Oxide (Asg) (No Superseding Document)
• MS-9175 - Bolt-Machine, Steel, Drilled 12 Point Head, .5625-18, Black Oxide (Asg) (No Superseding Document)
• MS-9186 - Bolt-Machine, Steel, 12 Point Head, .164 (No. 8)-36, Cadmium Plate (No Superseding Document)
• MS-9208 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .190-32 UNJF-3a (Superseded by SAE as-9208)
• MS-9209 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .250-28 UNJF-3a (Superseded by SAE as-9209)
• MS-9210 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .3125-24 UNJF-3a (Superseded by SAE as-9210)
• MS-9211 - Bolt, Machine-Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .375-24 UNJF-3a
• MS-9212 - Bolt, Machine-Steel AMS 6304, Diffused Nickel-Cadium Plated, Double Hexagon Extended Washer Head, .4375-20 UNJF-3a (Superseded by SAE as-9212)
• MS-9213 - Bolt, Machine-Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .500-20 UNJF-3a
• MS-9214 - Bolt, Machine, Double Hexagon Extended Washer Head, Steel, .5625-18 UNJF-3a
• MS-9217 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .190-32 UNJF-3a (Superseded by SAE as-9217)
• MS-9218 - Bolt, Machine - Steel, AMS 6304, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .250-28 UNJF-3a (Superseded by SAE as-9218)
• MS-9219 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, .3125-24 UNJF-3a (Superseded by SAE as-9219)
• MS-9220 - Bolt, Machine-Steel Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .375-24 UNJF-3a
• MS-9221 - Bolt, Machine-Steel Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .4375-20 UNJF-3a
• MS-9222 - Bolt, Machine-Steel Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .500-20 UNJF-3a
• MS-9223 - Bolt, Machine-Steel Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .5625-18 UNJF-3a
• MS-9283 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .190-32 UNJF-3a (Superseded by SAE as-9283)
• MS-9284 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .250-28 UNJF-3a (Superseded by SAE as-9284)
• MS-9285 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .3125-24 UNJF-3a (Superseded by SAE as-9285)
• MS-9286 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .375-24 UNJF-3a (Superseded by SAE as-9286)
• MS-9287 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .4375-20 UNJF-3a
• MS-9288 - Bolt, Machine Steel AMS 6322, Black Oxide, Hexagon Head, .500-20 UNJF-3a
• MS-9289 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .5625-18 UNJF-3a
• MS-9290 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .624-18 UNJF-3a
• MS-9291 - Bolt, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .750-16 UNJF-3a
• MS-9294 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .190-32 UNJF-3a (Superseded by SAE as-9294)
• MS-9295 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .250-28 UNJF-3a
• MS-9296 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3a (Superseded by SAE as-9296)
• MS-9297 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .375-24 UNJF-3a (Superseded by SAE as-9297)
• MS-9298 - Bolt, Machine-Steel AMS 6322, Black Oxide,Drilled 1 Hole, Hexagon Head, .4375-20 UNJF-3a
• MS-9299 - Bolt, Machine Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .500-20 UNJF-3a
• MS-9300 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .5625-18 UNJF-3a
• MS-9301 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon, .625-18 UNJF-3a
• MS-9302 - Bolt, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .750-16 UNJF-3a
• MS-9397 - Bolt, Tee Head - AMS 6322, Chamfered, .190-32 UNJF-3a, Cadmium Plate (Asg) (Superseded by SAE as-9397)
• MS-9398 - Bolt, Tee Head - AMS 6322, Chamfered, .250-28 UNJF-3a, Cadium Plate(Asg) (Superseded by SAE as-9398)
• MS-9399 - Bolt, Tee Head-AMS 6322, Chamfered, .3125-24 UNJF-3a, Cadmium Plate (Superseded by SAE as-9399)
• MS-9400 - Bolt, Tee Head AMS 6322, Chamfered, .375-24 Unjf -3a, Cadmium Plate (Superseded by SAE as-9400)
• MS-9401 - Bolt, Tee Head - AMS 6322, Chamfered, .4375-20 UNJF-3a, Cadmium Plate
• MS-9402 - Bolt, Tee Head AMS 6322, Chamfered, .500-20 UNJF-3a, Cadmium Plate (Superseded by SAE as-9402)
• MS-9432 - Bolt, Tee Head - AMS 5735, Chamfered, .190-32 UNJF-3a (Superseded by SAE as-9432)
• MS-9433 - Bolt, Tee Head - AMS 5735, Chamfered, .250-28 UNJF-3a (Asg) (Superseded by SAE as-9433)
• MS-9434 - Bolt, Tee Head - AMS 5735, Chamfered, .3125-24 UNJF-3a (Asg) (Superseded by SAE as-9434)
• MS-9435 - Bolt, Tee Head and AMS 5735, Chamfered, .375-24 UNJF-3a (Asg)
• MS-9436 - Bolt, Tee Head and AMS 5735, Chamfered, .4375-20 UNJF-3a (Asg)
• MS-9437 - Bolt, Tee Head and AMS 5735, Chamfered, .500-20 UNJF-3a (Asg)
• MS-9440 - Bolt, Machine Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .190-32 UNJF-3a (Superseded by SAE as-9440)
• MS-9441 - Bolt, Machine Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .250-28 UNJF-3a (Superseded by SAE as-9441)
• MS-9442 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .3125-24 UNJF-3a (Asg) (Superseded by SAE as-9442)
• MS-9443 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .375-24 UNJF-3a
• MS-9444 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .4375-20 UNJF-3a (Superseded by SAE as-9444)
• MS-9445 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .500-20 UNJF-3a
• MS-9446 - Bolt, Machine - Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .5625-18 UNJF-3a
• MS-9447 - Bolt, Machine-Steel AMS 6304, Diffused Nickel-Cadmium, Plated, Hexagon Head, Drilled, .625-18 UNJF-3a
• MS-9448 - Bolt, Machine and Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .750-16 UNJF-3a (Asg)
• MS-9451 - Bolt, Machine, Hexagon Head, Steel, .190-32 UNJF-3a (Superseded by SAE as-9451)
• MS-9452 - Bolt, Machine, Hexagon Head, Steel, .250-28 UNJF-3a (Superseded by SAE as-9452)
• MS-9453 - Bolt, Machine, Hexagon Head, Steel, .3125-24 UNJF-3a (Superseded by SAE as-9453)
• MS-9454 - Bolt, Machine, Hexagon Head, Steel, .375-24 UNJF-3a (Superseded by SAE as-9454)
• MS-9455 - Bolt, Machine, Hexagon Head, Steel, .4375-20 UNJF-3a (Superseded by SAE as-9455)
• MS-9456 - Bolt, Machine, Hexagon Head, Steel, .500-20 UNJF-3a (Superseded by SAE as-945)
• MS-9457 - Bolt, Machine, Hexagon Head, Steel, .5625-18 UNJF-3a (Superseded by SAE as-9457)
• MS-9458 - Bolt, Machine, Hexagon Head, Steel, .625-18 UNJF-3a (Superseded by SAE as-9458)
• MS-9459 - Bolt, Machine, Hexagon Head, Steel, .750-16 UNJF-3a (Superseded by SAE as-9459)
• MS-9489 - Bolt, Machine - Hexagon Head, Full Shank AMS 5731, .190-32 UNJF-3a (Superseded by SAE as-9489)
• MS-9490 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .250-28 UNJF-3a (Superseded by SAE as-9490)
• MS-9491 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .3125-24 UNJF-3a (Superseded by SAE as-9491)
• MS-9492 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .375-24 UNJF-3a (Superseded by SAE as-9492)
• MS-9493 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .4375-20 UNJF-3a (Superseded by SAE as-9493)
• MS-9494 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .500-20 UNJF-3a (Superseded by SAE as-9494)
• MS-9495 - Bolt, Machine, Hexagon Head, Full Shank, AMS 5731, .5625-18 UNJF-3a (No Superseding Document)
• MS-9496 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .625-18 UNJF-3a (Superseded by SAE as-9496)
• MS-9497 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5731, .750-16 UNJF-3a (No Superseding Document)
• MS-9500 - Bolt, Machined - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .190-32 UNJF-3a (Superseded by SAE as-9500)
• MS-9501 - Bolt, Machined - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .250-28 UNJF-3a (Superseded by SAE as-9501)
• MS-9502 - Bolt, Machined-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .3125-24 UNJF-3a (Superseded by SAE as-9502)
• MS-9503 - Bolt, Machined-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .375-24 UNJF-3a (Superseded by SAE as-9503)
• MS-9504 - Bolt, Machined - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .4375-20 UNJF-3a (No Superseding Document)
• MS-9505 - Bolt, Machined-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .500-20 UNJF-3a (Superseded by SAE as-9505)
• MS-9506 - Bolt, Machined - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .5625-18 UNJF-3a (No Superseding Document)
• MS-9507 - Bolt, Machined-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .625-18 UNJF-3a (No Superseding Document)
• MS-9508 - Bolt, Machined - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, .750-16 UNJF-3a (No Superseding Document)
• MS-9518 - Bolt, Machine, Hexagon Head Steel, Cadmium Plated .190-32 UNJF-3a (Superseded by SAE as-9518)
• MS-9519 - Bolt, Machine, Hexagon Head, Steel, Cadmium Plated, .250-28UNJF-3a (Superseded by SAE as-9519)
• MS-9520 - Bolt, Machine Steel AMS 6322, Cadmium Plate, Hexagon Head, .3125-24 UNJF-3a (Superseded by SAE as-9520)
• MS-9521 - Bolt, Machine, Hexagonhead, Steel Cadmium P Lated,.375-24Unjf -3a (Superseded by SAE as-9521)
• MS-9522 - Bolt, Machine, Hexagon Head, Steel, Cadmium Plated, .4375-20UNJF-3a (Superseded by SAE as-9522)
• MS-9523 - Bolt, Machine, Hexagon Head, Steel, Cadmium Plated, .500-20 UNJF-3a (Superseded by SAE as-9523)
• MS-9524 - Bolt, Machine, Hexagon Head, Steel, Cadmium Plated, .5625-18UNJF-3a (Superseded by SAE as-9524)
• MS-9525 - Bolt, Machine, Hexagon Head, Steel, Cadmium Plated, .625-18UNJF-3a (Superseded by SAE as-9525)
• MS-9526 - Bolt, Machine, Hexagon Head, Steel, Cadmium Plated, .750-16UNJF-3a (Superseded by SAE as-9526)
• MS-9529 - Bolt, Machine, Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .190-32 UNJF-3a (Superseded by SAE as-9529)
• MS-9530 - Bolt, Machine-Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNJF-3a (Superseded by SAE as-9530)
• MS-9531 - Bolt, Machine-Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3a (Superseded by SAE as-9531)
• MS-9532 - Bolt, Machine-Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .375-24 UNJF-3a (Superseded by SAE as-9532)
• MS-9533 - Bolt, Machine-Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .4375-20 UNJF-3a (Superseded by SAE as-9533)
• MS-9534 - Bolt, Machine-Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .500-20 UNJF-3a (Superseded by SAE as-9534)
• MS-9535 - Bolt, Machine-Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .5625-18 UNJF-3a (No Superseding Document)
• MS-9536 - Bolt, Machine-Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .625-18 UNJF-3a (No Superseding Document)
• MS-9537 - Bolt, Machine-Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .750-16 UNJF-3a (No Superseding Document)
• MS-9556 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32 UNJF-3a (Superseded by SAE as-9556)
• MS-9557 - Bolt, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .250-28 UNJF-3a (Superseded by SAE as-9557)
• MS-9558 - Bolt, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3a (Superseded by SAE as-9558)
• MS-9559 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .375-24 UNJF-3a (Superseded by SAE as-9559)
• MS-9560 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .4375-24 UNJF-3a
• MS-9561 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .500-20 UNJF-3a
• MS-9562 - Bolt, Machined-Double Hexagon Extended Washer Head, Pd Shank, AMS 5731, .5625-18 UNJF-3a (No Superseding Document)
• MS-9565 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Pd Shank, AMS 5731, .190-32 UNJF-3a (Superseded by SAE as-9565)
• MS-9566 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Pd Shank, AMS 5731, .250-28 UNJF-3a (Superseded by SAE as-9566)
• MS-9567 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Pd Shank, AMS 5731, .3125-24 UNJF-3a (Superseded by SAE as-9567)
• MS-9568 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Pd Shank, Drilled, AMS 5731, .375-24 UNJF-3a (Superseded by SAE as-9568)
• MS-9569 - Bolt, Machined-Double Hexagon Extended Washer Head, Drilled, Pd Shank, AMS 5731, .4375-20 UNJF-3a (No Superseding Document)
• MS-9570 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, AMS5731, .500-20 UNJF-3a (No Superseding Document)
• MS-9571 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, AMS 5731, .5625-18 UNJF-3a (No Superseding Document)
• MS-9574 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .190-32 UNJF-3a (Superseded by SAE as-9574)
• MS-9575 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .250-28 UNJF-3a (Superseded by SAE as-9575)
• MS-9576 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .3125-24 UNJF-3a (Superseded by SAE as-9576)
• MS-9577 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .375-24 UNJF-3a (Superseded by SAE as-9577)
• MS-9578 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .4375-20 UNJF-3a
• MS-9579 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, AMS 5731, Silver Plated, .500-20 UNJF-3a (Superseded by SAE as-9579)
• MS-9580 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, ASM 5731, Silv
• MS-9583 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .190-32 UNJF-3a (Superseded by SAE as-9583)
• MS-9584 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .250-28 UNJF-3a (Superseded by SAE as-9584)
• MS-9585 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .3125-24 UNJF-3a (Superseded by SAE as-9585)
• MS-9586 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .375-24 UNJF-3a (Superseded by SAE as-9586)
• MS-9587 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .4375-20 UNJF-3a (Superseded by SAE as-9587)
• MS-9588 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .500-20 UNJF-3a (Superseded by SAE as-9588)
• MS-9589 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .5625-18 UNJF-3a (Superseded by SAE as-9589)
• MS-9590 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .625-18 UNJF-3a (No Superseding Document)
• MS-9591 - Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .750-16 UNJF-3a (No Superseding Document)
• MS-9624 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .190-32 UNJF-3a (No Superseding Document)
• MS-9625 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .250-28 UNJF-3a (No Superseding Document)
• MS-9626 - Bolt, Machine-Hexagon Head, Drilled 1 Hole, Pd Shank, Titanium AMS 4967, .3125-24 UNJF-3a (No Superseding Document)
• MS-9627 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .375-24 UNJF-3a (No Superseding Document)
• MS-9628 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .4375-20 UNJF-3a (No Superseding Document)
• MS-9629 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .500-20 UNJF-3a (No Superseding Document)
• MS-9630 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .5625-18 UNJF-3a (No Superseding Document)
• MS-9633 - Bolt, Machine - Hexagon Head, Pd Shank, Titanium AMS 4967, .190-32 UNJF-3a (Superseded by SAE as-9633)
• MS-9634 - Bolt, Machine-Hexagon Head, Pd Shank, Titanium AMS 4967, .250-28 UNJF-3a (No Superseding Document)
• MS-9635 - Bolt, Machine-Hexagon Head, Pd Shank, Titanium AMS 4967, .3125-24 Unjf3a (No Superseding Document)
• MS-9636 - Bolt, Machine-Hexagon Head, Pd Shank, Titanium AMS 4967, .375-24 UNJF-3 (No Superseding Document)
• MS-9637 - Bolt, Machine-Hexagon Head, Pd Shank, Titanium AMS 4967, .4375-20 UNJF-3 (No Superseding Document)
• MS-9638 - Bolt, Machine - Hexagon Head, Pd Shank, Titanium AMS 4967, .500-20 UNJF-3a (Superseded by SAE as-9638)
• MS-9639 - Bolt, Machine-Hexagon Head, Pd Shank, Titanium AMS 4967, .5625-18 UNJF-3 (No Superseding Document)
• MS-9642 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .500-20 UNJF-3 (No Superseding Document)
• MS-9643 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .250-28 UNJF-3a (No Superseding Document)
• MS-9644 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .3125-24 UNJF-3a (No Superseding Document)
• MS-9645 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .375-24 UNJF-3a (No Superseding Document)
• MS-9646 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .4375-20 UNJF-3a (No Superseding Document)
• MS-9647 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .500-20 UNJF-3a (No Superseding Document)
• MS-9648 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .5625-18 UNJF-3a (No Superseding Document)
• MS-9651 - Bolt, Machine - Hexagon Head, Full Shank, Titanium AMS 4967, .190-32 UNJF-3a (No Superseding Document)
• MS-9652 - Bolt, Machine-Hexagon Head, Full Shank, Titanium AMS 4967, .250-28 UNJF-3a (No Superseding Document)
• MS-9653 - Bolt, Machine-Hexagon Head, Full Shank, Titanium AMS 4967, .3125-24 UNJF-3a (No Superseding Document)
• MS-9654 - Bolt, Machine-Hexagon Head, Full Shank, Titanium AMS 4967, .375-24 UNJF-3a (No Superseding Document)
• MS-9655 - Bolt, Machine-Hexagon Head, Full Shank, Titanium AMS 4967, .4375-20 UNJF-3a (No Superseding Document)
• MS-9656 - Bolt, Machine-Hexagon Head, Full Shank, Titanium AMS 4967, .500-20 UNJF-3a (No Superseding Document)
• MS-9657 - Bolt, Machine - Hexagon Head, Full Shank, Titanium, AMS 4967, .5625-18 UNJF-3a (No Superseding Document)
• MS-9676 - Bolt, Machine-Cres AMS 5731, Double Hexagon Extended Washer Head, Cup Washer Locked, .190-32 UNJF-3a (Superseded by SAE as-9676)
• MS-9677 - Bolt, Machine-Cres, AMS5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .250-28 UNJF-3a (Superseded by SAE as-9677)
• MS-9678 - Bolt, Machine-Cres, AMS 5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .3125-24 UNJF-3a (Superseded by SAE as-9678)
• MS-9679 - Bolt, Machine-Cres, AMS5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .375-24 UNJF-3a (Superseded by SAE as-9679)
• MS-9680 - Bolt, Machine-Steel, AMS 6322, Cadmium Plated, Double Hexagon, Extended Washer Head, Cup Washer Locked, .190-32 UNJF-3a (Superseded by SAE as-9680)
• MS-9681 - Bolt, Machine-Steel AMS 6322, Cadmium Plated, Double Hexagon Extended Washer Head, Cupwasher Locked, .250-28 UNJF-3a (Superseded by SAE as-9681)
• MS-9682 - Bolt, Machine-Steel AMS 6322, Cadmium Plated, Double Hexagon, Extended Washer Head, Cupwasher Locked, .3125-24 UNJF-3a (No Superseding Document)
• MS-9683 - Bolt, Machine-Steel AMS 6322, Cadmium Plated, Double Hexagon Extended Washer Head, Cupwasher Locked, .375-24 UNJF-3a (No Superseding Document)
• MS-9685 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate, .190-32 UNJF-3a (Superseded by SAE as-9685)
• MS-9686 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate, .250-28 UNJF-3a (Superseded by SAE as-9686)
• MS-9687 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate, .3125-24 UNJF-3a (Superseded by SAE as-9687)
• MS-9688 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel, Diffused Nickel Cadium, .375-24 UNJF-3a
• MS-9689 - Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate .4375-20 UNJF-3a (No Superseding Document)
• MS-9690 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate .500-20 UNJF-3a (No Superseding Document)
• MS-9691 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate, .5625-18 UNJF-3a (No Superseding Document)
• MS-9692 - Bolt, Machine-Hexagon Head, Drilled 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate .625-18 UNJF-3a (No Superseding Document)
• MS-9693 - Bolt, Machine-Hexagon Head, Drilled 1 Hole, Pd Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate .750-16 UNJF-3a (No Superseding Document)
• MS-9696 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32 UNJF-3a (Superseded by SAE as-9696)
• MS-9697 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .250-28 UNJF-3a (Superseded by SAE as-9697)
• MS-9698 - Bolt, Machine-Double Hexagon, Extended Washer, Head, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3a (Superseded by SAE as-9698)
• MS-9699 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .375-24 UNJF-3a (Superseded by SAE as-9699)
• MS-9700 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .4375-20 UNJF-3a
• MS-9701 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .500-20 UNJF-3a (No Superseding Document)
• MS-9702 - Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .5625-18 UNJF-3a (No Superseding Document)
• MS-9705 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .190-32 UNJF-3a (Superseded by SAE as-9705)
• MS-9706 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .250-28 UNJF-3a
• MS-9707 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3a
• MS-9708 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .375-24 UNJF-3a
• MS-9709 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .4375-20 UNJF-3a
• MS-9710 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .500-20 UNJF-3a (No Superseding Document)
• MS-9711 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .5625-18 UNJF-3a (No Superseding Document)
• MS-9714 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .190-32 UNJF-3a (Superseded by SAE as-9714)
• MS-9715 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .250-28 UNJF-3a (Superseded by SAE as-9715)
• MS-9716 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3a (Superseded by SAE as-9716)
• MS-9717 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .375-24 UNJF-3a
• MS-9718 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .4375-20 UNJF-3a
• MS-9719 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .500-20 UNJF-3a (No Superseding Document)
• MS-9720 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .5625-18 UNJF-3a (No Superseding Document)
• MS-9722 - Screw, Machine-Double Hexagon, Extended Washer Head, Closed Tolerance Shank, Corrosion and Heat Resistant Steel, .164-36 UNJF-3a (No Superseding Document)
• MS-9723 - Bolt, Machine-Double Hexagon, Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistance Steel, .190-32 UNJF-3a
• MS-9724 - Bolt, Machine-Double Hexagon, Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, .250-28 USNJF-3a (Superseded by SAE as-9724)
• MS-9725 - Bolt, Machine-Double Hexagon, Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3a
• MS-9726 - Bolt, Machine-Double Hexagon, Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, .375-24 UNJF-3a (No Superseding Document)
• MS-9727 - Bolt, Machine-Double Hexagon, Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, .4375-20 UNJF-3a
• MS-9728 - Bolt, Machine - Double Hexagon, Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, .500-20 UNJF-3a (No Superseding Document)
• MS-9729 - Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5708, .5625-18 UNJF-3a (No Superseding Document)
• MS-9732 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .190-32 UNJF-3a (Superseded by SAE as-9732)
• MS-9733 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .250-28 UNJF-3a (Superseded by SAE as-9733)
• MS-9734 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .3125-24 UNJF-3a (Superseded by SAE as-9734)
• MS-9735 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .375-24 UNJF-3a (No Superseding Document)
• MS-9736 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .4375-20 UNJF-3a (No Superseding Document)
• MS-9737 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .500-20 UNJF-3a (No Superseding Document)
• MS-9738 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .5625-18 UNJF-3a (No Superseding Document)
• MS-9741 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .190-32 UNJF-3a (Superseded by SAE as-9741)
• MS-9742 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .250-28 UNJF-3a (Superseded by SAE as-9742)
• MS-9743 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .3125-24 UNJF-3a (No Superseding Document)
• MS-9744 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .375-24 UNJF-3a (No Superseding Document)
• MS-9745 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .4375-20 UNJF-3a (No Superseding Document)
• MS-9746 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .500-20 UNJF-3a (No Superseding Document)
• MS-9747 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, .5625-18 UNJF-3a (No Superseding Document)
• MS-9750 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .190-32 UNJF-3a (Superseded by SAE as-9750)
• MS-9751 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .250-28 UNJF-3a (Superseded by SAE as-9751)
• MS-9752 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .3125-24 UNJF-3a (No Superseding Document)
• MS-9753 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .375-24 UNJF-3a (No Superseding Document)
• MS-9754 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .4375-20 UNJF-3a (No Superseding Document)
• MS-9755 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .500-20 UNJF-3a (No Superseding Document)
• MS-9756 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, .5625-18 UNJF-3a (No Superseding Document)
• MS-9759 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .190-32 UNJF-3a (Superseded by SAE as-9759)
• MS-9760 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .250-28 UNJF-3a (Superseded by SAE as-9760)
• MS-9761 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .3125-24 UNJF-3a (Superseded by SAE as-9761)
• MS-9762 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .375-24 UNJF-3a (No Superseding Document)
• MS-9763 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .4375-20 UNJF-3a (No Superseding Document)
• MS-9764 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .500-20 UNJF-3a (No Superseding Document)
• MS-9765 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, .5625-18 UNJF-3a (No Superseding Document)
• MS-9783 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .190-32 UNJF-3a (Superseded by SAE as-9783)
• MS-9784 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .250-28 UNJF-3a (Superseded by SAE as-9784)
• MS-9785 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .3125-24 UNJF-3a (Superseded by SAE as-9785)
• MS-9786 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .375-24 UNJF-3a (Superseded by SAE as-9786)
• MS-9787 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .4375-20 UNJF-3a (No Superseding Document)
• MS-9788 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .500-20 UNJF-3a (Superseded by SAE as-9788)
• MS-9789 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .5625-18 UNJF-3a (No Superseding Document)
• MS-9790 - Bolt, Machine, Hexagon Head, Full Shank, AMS 5643, .625-18 UNJF-3a (Superseded by SAE as-9790)
• MS-9791 - Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .750-16 UNJF-3a (No Superseding Document)
• MS-9794 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .190-32 UNJF-3a (No Superseding Document)
• MS-9795 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .250-28 UNJF-3a (No Superseding Document)
• MS-9796 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .3125-24 UNJF-3a (Superseded by SAE as-9796)
• MS-9797 - Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .375-24 UNJF-3a (No Superseding Document)
• MS-9798 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .4375-20 UNJF-3a (No Superseding Document)
• MS-9799 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .500-20 UNJF-3a (No Superseding Document)
• MS-9800 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .5625-18 UNJF-3a (No Superseding Document)
• MS-9801 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .625-18 UNJF-3a (No Superseding Document)
• MS-9802 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .750-16 UNJF-3a (No Superseding Document)
• MS-9805 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .190-32 UNJF-3a (Superseded by SAE as-9805)
• MS-9806 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .250-28 UNJF-3a (Superseded by SAE as-9806)
• MS-9807 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .3125-24 UNJF-3a (No Superseding Document)
• MS-9808 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .375-24 UNJF-3a (Superseded by SAE as-9808)
• MS-9809 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .4375-20 UNJF-3a (No Superseding Document)
• MS-9810 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .500-20 UNJF-3a (No Superseding Document)
• MS-9811 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .5625-18 UNJF-3a (No Superseding Document)
• MS-9812 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .625-18 UNJF-3a (No Superseding Document)
• MS-9813 - Bolt, Machine - Hexagon Head, Pd Shank, AMS 5643, .750-16 UNJF-3a (No Superseding Document)
• MS-9816 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .190-32 UNJF-3a (Superseded by SAE as-9816)
• MS-9817 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .250-28 UNJF-3a (No Superseding Document)
• MS-9818 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .3125-24 UNJF-3a (No Superseding Document)
• MS-9819 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .375-24 UNJF-3a (No Superseding Document)
• MS-9820 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .4375-20 UNJF-3a (No Superseding Document)
• MS-9821 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .500-20 UNJF-3a (Superseded by SAE as-9821)
• MS-9822 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .5625-18 UNJF-3a (No Superseding Document)
• MS-9823 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .625-18 UNJF-3a (No Superseding Document)
• MS-9824 - Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, .750-16 UNJF-3a (No Superseding Document)
• MS-9885 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS 5616, .190-32 UNJF-3a (Superseded by SAE as-9885)
• MS-9886 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS 5616, .250-2B UNJF-3A
• MS-9887 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS 5616, .3125-24 UNJF-3a (Superseded by SAE as-9887)
• MS-9888 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS5616, .375-24 UNJF-3a (No Superseding Document)
• MS-9889 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS5616, .4375-20 UNJF-3a (No Superseding Document)
• MS-9890 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS 5616, .500-20 UNJF-3a (Superseded by SAE as-9890)
• MS-9891 - Bolt, Machine - Double Hexagon Extended Washer Head, AMS 5616, .5625-18 UNJF-3a (No Superseding Document)
• MS-9894 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled AMS 5616, .190-32 UNJF-3a (Superseded by SAE as-9894)
• MS-9895 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, AMS 5616, 250-28 UNJF-3a (Superseded by SAE as-9895)
• MS-9896 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .3125-24 UNJF-3a
• MS-9897 - Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, AMS 5616, .375-24 UNJF-3a (No Superseding Document)
• MS-9898 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .4375-20 UNJF-3a (No Superseding Document)
• MS-9899 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, AMS 5616, .500-20 UNJF-3a (No Superseding Document)
• MS-9900 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .5625-18 UNJF-3a (No Superseding Document)
• MS-9914 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, .190-32 UNJF-3a (Superseded by SAE as-9914)
• MS-9915 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, .250-28 UNJF-3a
• MS-9916 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, .3125-24 UNJF-3a (Superseded by SAE as-9916)
• MS-9917 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, .375-24 UNJF-3a (Superseded by SAE as-9917)
• MS-9918 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, .4375-20 UNJF-3a (Superseded by SAE as-9918)
• MS-9919 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS6322, Cadmium Plated, .500-20 UNJF-3a (No Superseding Document)
• MS-9920 - Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS6322, Cadmium Plated, .5625-18 UNJF-3a (No Superseding Document)
• MS-9923 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS 6322, Cadium Plated, .190-32 UNJF-3a (Superseded by SAE as-9923)
• MS-9924 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS, Cadmium Plated, .250-28 UNJF-3a (Superseded by SAE as-9924)
• MS-9925 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS6322, Cadmium Plated, .3125-24 UNJF-3a (No Superseding Document)
• MS-9926 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS6322, Cadmium Plated, .375-24 UNJF-3a (No Superseding Document)
• MS-9927 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS6322, Cadmium Plated, .4375-20 UNJF-3a (No Superseding Document)
• MS-9928 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS 6322, Cadmium Plated, .500-20 UNJF-3a (Superseded by SAE as-9928)
• MS-9929 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS6322, Cadmium Plated, .5625-18 UNJF-3a (No Superseding Document)
• MS-9932 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .190-32 UNJF-3a
• MS-9933 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .250-28 UNJF-3a (Superseded by SAE as-9933)
• MS-9934 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .3125-24 UNJF-3a (No Superseding Document)
• MS-9935 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .375-24 UNJF-3a (No Superseding Document)
• MS-9936 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322 Cadmium Plated, .4375-20 UNJF-3a (No Superseding Document)
• MS-9937 - Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .500-20 UNJF-3a (No Superseding Document)
• MS-9938 - Bolt, Machine-Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .5625-18 UNJF-3a (No Superseding Document)
• MS-9941 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .190-32 UNJF-3a (No Superseding Document)
• MS-9942 - Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .250-28 UNJF-3a (No Superseding Document)
• MS-9943 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Seel AMS 6322, Cadmium Plated, .3125-24 UNJF-3a (No Superseding Document)
• MS-9944 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .375-24 UNJF-3a (Superseded by SAE as-9944)
• MS-9945 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .4375-20 UNJF-3a (No Superseding Document)
• MS-9946 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .500-20 UNJF-3a (No Superseding Document)
• MS-9947 - Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .5625-18 UNJF-3a (Superseded by SAE as-9947)
• MS-9957 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .190-32 UNJF-3a (No Superseding Document)
• MS-9958 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .250-28UNJF-3a (Superseded by SAE as-9958)
• MS-9959 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .3125-24 UNJF-3a (No Superseding Document)
• MS-9960 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .375-24 UNJF-3a (No Superseding Document)
• MS-9961 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .4375-20 UNJF-3a (No Superseding Document)
• MS-9962 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .500-20 UNJF-3a (No Superseding Document)
• MS-9963 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .5625-18UNJF-3a (No Superseding Document)
• MS-9964 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .625-18UNJF-3a (Superseded by SAE as-9964)
• MS-9965 - Bolt, Machine, Hexagon Head, Drilled, 6 Hole, Pd Shank, Steel AMS 6322, Cadmium Plated, .750-16UNJF-3a (No Superseding Document)
• NA-0036 - Bolt, Close Tolerance, Hexagon Head, Alloy Steel, 1100 Mpa, Metric
• NA-0037 - BOLT, TENSION, CLOSE TOLERANCE, HEXAGON HEAD, TITANIUM ALLOY, 1100 MPa Ftu, METRIC
• NA-0045 - Bolt, Close Tolerance, Hexagon Head, a286 Cres, 1100 Mpa, Metric
• NA-0058 - Bolt, Close Tolerance, Spline Drive, Alloy Steel, 1250 Mpa, Metric
• NA-0059 - BOLT, TENSION, CLOSE TOLERANCE, SPLINE DRIVE, A286 CRES, 1250 MPa, METRIC
• NA-0062 - Bolt, Alloy Steel, 1550 Mpa Tensile, Spline Drive, Metric -Mar 80
• NA-0063 - Bolt, Alloy Steel, 1800 Mpa Tensile, Spline Drive, Metric -Mar 80
• NA-0071 - BOLT, ALLOY STEEL, 1550 MPa TENSILE, PROCUREMENT SPECIFICATION
• NA-0072 - Bolt, Alloy Steel, 1800 Mpa Tensile, Procurement Specification
• NA-0152 - BOLT, EYE, ALLOY STEEL, 1100 MPa, METRIC
• NA-0153 - Bolt, Eye, a286 Cres, 1100 Mpa, Metric
• NA-0155 - Bolt, Clevis, 660 Mpa Shear, Metric
• NAM-51417 - Bolt, Machine, Hex Head, Fully Threaded, Fine Thread, Metric
• NAS-1003 THRU 1020 - Bolt, Machine, Hexagon Head, a286 Cres
• NAS-1053 - Bolt, Eye, Assembly, Forged Carbon Steel
• NAS-1083 THRU 1088 - Bolt, 100 Degree Flush Head, 'Hi-Torque' Recess, Titanium Alloy (Short Thread)
• NAS-1103 THRU 1120 - Bolt, Shear - Hexagon Head Modified, 95 Ksi Fsu, Short Thread
• NAS-1160 - Bolt, Shoulder, Hex Head, Close Tolerance, Cres, a286, 95 Ksi Fsu
• NAS-1202 THRU 1210 - Bolt, 100 Degrees Close Tolerance Head and Shank, 160,000 Psi, Short Thread
• NAS-1251 - Bolt, Ring, Swivel
• NAS-1261 THRU 1265 - Bolt, Tension, Hex Head, Close Tolerance, Short Thread, Titanium Alloy, 160 Ksi Ftu
• NAS-1266 THRU 1270 - Bolt, Tension, Hex Head, Close Tolerance, Titanium Alloy, 160 Ksi Ftu
• NAS-1271 THRU 1280 - Bolt, Twelve Point, External Wrenching, Titanium Alloy
• NAS-1297 - Bolt, Shoulder-Hexagon Head
• NAS-1303 THRU 1320 - Bolt, Tension, Hexagon Head 160 Ksi Ftu
• NAS-144 THRU 158 - Bolt, Internal Wrenching, Steel, .2500-28 Thru 1.1250-12
• NAS-1503 THRU 1510 - Bolt, 100 Deg Flush Head, Hi-Torque Recess, Short Thread Alloy Steel, 160,000 Psi
• NAS-1578 - Bolt, Shear, Flat Pan Head, Close Tolerance, Dovetail Slot, Offset Cruciform, and Offset Cruciform-Ribbed, Self-Locking and Nonlocking, 95 Ksi Fsu
• NAS-1580 - BOLT, SHEAR, 100 Degrees FLUSH HEAD, OFFSET CRUCIFORM, OFFSET CRUCIFORM - RIBBED AND DOVETAIL SLOT, 95 KSI Fsu
• NAS-1581 - Bolt, Shear, 100 Degrees Flush Reduced Head, Offset Cruciform, Offset Cruciform - Ribbed and Dovetail Slot, 95 Ksi Fsu
• NAS-1586 - Bolt Tension, 12 Pt Ext Wrenching, 1200 Deg F
• NAS-1588 - Bolt Sheaf, Hex Head, 1200 Deg F
• NAS-159 - Bolt - Internal Wrenching - Aircraft
• NAS-1603 THRU 1610 - Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 Psi
• NAS-1703 THRU 1710 - Bolt, 100 Deg Flush Head .0156 Oversize Alloy Steel, 160,000 Psi
• NAS-172 - Bolt, Internal Wrenching, Steel, 1.2500-12
• NAS-174 - Bolt, Internal Wrenching, Steel, 1.3750-12
• NAS-176 - Bolt - Internal Wrenching - Steel 1.5000-12
• NAS-1767 - Bolt, Close Tolerance, 100 Degrees Reduced Head, Dovetail Slot
• NAS-1785 - BOLT, TENSION, 12-POINT, EXTERNAL WRENCHING, 220 KSI MIN Ftu, 132 KSI MIN Fsu, H-11 STEEL, 900 Degrees F
• NAS-1790 - Bolt, 100 Degrees Flush Head, 160 Ksi Uts
• NAS-1953 THRU 1970 - Bolt, Shear, Hexagon Head, 108 Ksi Shear, Long Thread
• NAS-1972 THRU 1980 - Bolt, Shear, 100 Degrees Flush Head, Offset Cruciform and Dovetail Slot, 108 Ksi Fsu
• NAS-1982 THRU 1990 - BOLT, SHEAR, BRAZIER HEAD, OFFSET CRUCIFORM AND DOVETAIL SLOT, 108 KSI Fsu
• NAS-1992 THRU 2000 - Bolt, Flat, 100 Degrees Reduced Head, Offset Cruciform and Dovetail Slot, 108 Ksi Fsu
• NAS-2803 THRU 2810 - Bolt, 100 Degrees Head, Offset Cruciform, Close Tolerance, 180,000 Psi
• NAS-2813 THRU 2830 - Bolt, Shear, Hexagon Head, Close Tolerance, Short Thread, 108 Ksi Fsu
• NAS-2832 THRU 2840 - Bolt, 100 Degrees Flat Head, Offset Cruciform and Dovetail Slot, 180 Ksi
• NAS-2842 THRU 2850 - Bolt, Brazier Head, Offset Cruciform and Dovetail Slot, 180 Ksi
• NAS-2852 THRU 2860 - Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Dovetail Slot, 108 Ksi Fsu
• NAS-2903 THRU 2920 - Bolt, Shear, Hexagon Head, .0156 Oversize Shank, 95 Ksi Ftu
• NAS-3003 THRU 3020 - Bolt, Shear, Hexagon Head, .0312 Oversize Shank, 95 Ksi Ftu
• NAS-3103 THRU 3110 - Bolt, U
• NAS-3203 THRU 3210 - Bolt, Hook
• NAS-3303 THRU 3305 - Bolt, U, Strap Type
• NAS-4002 - Fastener, Alloy Steel, Externally Threaded, 160 Ksi Ftu, 95 Ksi Fsu, 450 Degrees F
• NAS-4003 - FASTENER, A286 CORROSION RESISTANT ALLOY, EXTERNALLY THREADED, 160 KSI Ftu, 95 KSI Fsu, 1000 Degrees F
• NAS-4004 - FASTENER, 6AL-4V TITANIUM ALLOY, EXTERNALLY THREADED, 160 KSI Ftu, 95 KSI Fsu, 450 Degrees F
• NAS-4104 THRU 4116 - Bolt, 100 Deg Head, TRI-Slot Recess, Close, Tolerance, Alloysteel, Long Thread, Self-l
• NAS-4204 THRU 4216 - Bolt, 100 Deg Head, TRI-Slot Recess, Close Tolerance, a286 Cres, Long Thread, Self-Loc
• NAS-428 - Bolt, Machine, Crowned Hexagon Head, Adjusting
• NAS-4304 THRU 4316 - Bolt, 100 Deg Head, TRI-Slot Recess, Close Tolerance, 6al-4Vtitanium Alloy, Long Threa
• NAS-4400 THRU 4416 - Bolt, 100 Deg Head, TRI-Slot Recess, Close Tolerance, Alloysteel, Short Thread, Self-
• NAS-4500 THRU 4516 - Bolt, 100 Deg Head, TRI-Slot Recess, Close Tolerance, a286 Cres, Short Thread, Self-Lo
• NAS-464 - Bolt - Shear, Close Tolerance
• NAS-467 - Bolt, Hex Head, Brass, Electrical
• NAS-4703 THRU 4716 - Bolt, 100 Deg Reduced Head, TRI-Slot Recess, Close Tolerance, Alloy Steel, Short Threa
• NAS-4803 THRU 4816 - Bolt, 100 Deg Reduced Head, TRI-Slot Recess, Close Tolerance, a286 Cres, Short Thread,
• NAS-4903 THRU 4916 - Bolt, 100 Deg Reduced Head, TRI-Slot Recess, Close Tolerance, 6al-4V Titanium Alloy, S
• NAS-495 - Bolt, Internal Wrenching, Steel, High Tensile and High Fatigue Strength
• NAS-496 - Bolts - Internal Wrenching
• NAS-5000 THRU 5006 - Bolt, Pan Head, Close Tolerance, Short Thread, TRI-Slot Recess, Alloy Steel, Self-Lock
• NAS-501 - Bolt, Tension, Hex Head, Stabilized, Non-Magnetic, Cres, 85 Ksi Ftu
• NAS-5100 THRU 5106 - Bolt, Pan Head, Close Tolerance, Short Thread, TRI-Slot Recess, a286 Cres, Self-Lockin
• NAS-5200 THRU 5206 - Bolt, Pan Head, Close Tolerance, Short Thread TRI-Slot Recess, Titanium Alloy 6al-4V,
• NAS-563 THRU 572 - Bolt, Full-Threaded, 160 Ksi Steel, Drilled Head
• NAS-6203 THRU 6220 - BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, ALLOY STEEL, SHORT THREAD, REDUCED MAJOR THREAD DIA., SELF-LOCKING AND NONLOCKING, 160 KSI Ftu
• NAS-621 - Fasteners, Titanium Alloy Procurement Specification
• NAS-653 THRU 658 - Bolt, Shear, Close Tolerance, Hexagon Head, Titanium, Short Thread, .1900 To .5000, 9
• NAS-6603 THRU 6620 - Bolt, Tension, Hex Head, Close Tolerance, Alloy Steel, Long Thread, Reduced Major Dia., Self-Locking and Nonlocking, 160 Ksi Ftu
• NAS-6703 THRU 6720 - Bolt, Tension, Hex Head, Close Tolerance, a286 Cres, Long Thread, Reduced Major Thread
• NAS-673 THRU 678 - Bolt, Tension, Hexagon Head, Close Tolerance, 6al-4V Titanium Alloy, 160 Ksi Ftu
• NAS-7103 THRU 7116 - Bolt, Shear, 100 Deg Head, Ribbed Cruciform Recess, Close Tollerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking, 95 Ksi Fsu
• NAS-7203 THRU 7216 - Bolt, 100 Degrees Head, Cruciform Recess, Close Tolerance, a286 Cres, Long Thread, Self-Locking and Non-Locking
• NAS-7303 THRU 7316 - Bolt, 100 Degrees Head, Cruciform Recess, Close Tolerance, 6al-4V Titanium Alloy, Long Thread, Self-Locking and Nonlocking
• NAS-7400 THRU 7416 - Bolt, Shear, 100 Deg Flush Head, Ribbed Cruciform Recess, Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking, 95 Ksi Fsu
• NAS-7500 THRU 7516 - BOLT, SHEAR, 100 Degrees FLUSH HEAD, RIBBED CRUCIFORM RECESS, CLOSE TOLERANCE, A286 CRES, SHORT THREAD, SELF-LOCKING AND NONLOCKING, 95 KSI Fsu
• NAS-7600 THRU 7616 - Bolt, 100 Degrees Head, Cruciform Recess, Close Tolerance, 6al-4V Titanium Alloy, Short Thread, Self-Locking and Nonlocking
• NAS-7700 THRU 7706 - Bolt, Pan Head, Close Tolerance, Short Thread, Ribbed Cruciform Recess, Alloy Steel, Self-Locking and Nonlocking
• NAS-7800 THRU 7806 - Bolt, Pan Head, Close Tolerance, Short Thread, Cruciform Recess, a286 Cres, Self-Locking and Non-Locking
• NAS-7900 THRU 7906 - Bolt, Pan Head, Close Tolerance, Short Thread, Ribbed Cruciform Recess, Titanium Alloy 6al-4V, Self-Locking and Nonlocking
• NAS-81 - Bolt - 100 Degrees Flush Head Close Tolerance 5/16-24
• NAS-82 - Bolt - 100 Degrees Flush Head Close Tolerance 3/8-24
• NAS-83 - Bolt - 100 Degrees Flush Head Close Tolerance 7/16-20
• NAS-84 - Bolt - 100 Degrees Flush Head Close Tolerance 1/2-20
• NAS-85 - Bolt - 100 Degrees Flush Head Close Tolerance 9/16-18
• NAS-86 - Bolt - 100 Degrees Flush Head Close Tolerance 5/8-18
• NAS-8602 THRU 8616 - Bolt, Shear, 100 Deg Reduced Head, Ribbed Cruciform Recess, Close Tolerance, Alloy Steel, Short Thread
• NAS-8702 THRU 8716 - Bolt, Shear, 100 Degrees Reduced Head, Ribbed Cruciform Recess, Close Tolerance, a286, Short Thread
• NAS-8802 THRU 8816 - Bolt, Shear, 100 Degrees Reduced Head, Ribbed Cruciform Recess, Close Tolerance, 6al-4V Titanium Alloy, Short Thread
• NAS-9001 THRU 9006 - Screw, Hex Head, Offset Cruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 Psi Tensile
• NAS-9603 THRU 9624 - Bolt, Hexagon Head, a286 Cres, Close Tolerance, Minimum Major, Long Threads
• NAS-9703 THRU 9724 - Bolt, Hexagon Head, Alloy Steel, Close Tolerance, Minimum Major, Long Threads
• NAS-9921 - Bolt, Shear, Internal Wrenching, Short Thread, Self-Locking and Non-Locking, 6al-4V Titanium and a286 Cres, 160 Ksi Ftu
• NASM-14157 - Bolt, Wheel, Tension, Flanged, Steel, 180 Ksi Ftu, 450 Degrees F, External Spline Drive
• NASM-14181 - Bolt, Tension, Nickel Alloy 718, 220 Ksi Ftu, External Wrenching, Spline Drive, Flanged Head
• NASM-14490 - BOLT, WHEEL, NICKEL ALLOY 718, 220 KSI Ftu, 132 KSI Fsu, 450 Degrees F, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD
• NASM-16205 - Bolt, Machine, Regular Semi-Finished Hexagon Head, Copper-Silicon Alloy (Silicon Bronze), UNC-2a, Non-Magnetic
• NASM-16206 - Bolts, Machine, Hexagon Head, Regular, Semi-Finished, Aluminum Alloy, UNC-2a, Non-Magnetic
• NASM-16208 - Bolt, Tension, Hexagon Head, Finished, Cres, UNC-2a, Non-Magnetic, 75 Ksi Ftu
• NASM-20004 - 20024 - Bolts, Internal Wrenching, 160 Ksi Ftu and 96 Ksi Fsu
• NASM-20033 - 20046 - Bolt, Tension, Hexagon Head, Machine, a286 Cres, 1200 Degrees F, 140 Ksi Ftu
• NASM-20073 - Bolt, Machine, Aircraft, Drilled Head, Fine Thread
• NASM-20074 - Bolt, Machine, Aircraft, Drilled Head, Coarse Thread
• NASM-21094 - BOLT, SELF-LOCKING, 250 Degrees F, STEEL, 75 KSI Fsu, 125 KSI Ftu, HEX HEAD
• NASM-21095 - Bolt, Tension, Hex Head, Self-Locking, 250 Degree F, Cres, 80 Ksi Ftu, 48 Ksi Fsu
• NASM-21096 - Bolt, Self-Locking, 75 Ksi Fsu, 125 Ksi Ftu, Pan Head, Cruciform Recess
• NASM-21097 - Bolt, Self-Locking, 250 Degrees F, Cres, 48 Ksi Fsu, 80 Ksi Ftu, Pan Head, Cruciform Recess
• NASM-21098 - Bolt, Self-Locking, Steel, 160 Ksi Ftu, 250 Degrees F, 12 Point, External Wrenching (Externally Wrenching Cap Screws)
• NASM-21125 - BOLT, SELF-RETAINING, POSITIVE LOCKING, CRES, 90 KSI Fsu, 63 KSI Ftu, PAN HEAD, 450 Degrees F and 650 Degrees F
• NASM-21130 - Bolt, Self-Retaining, Positive Locking, Cres, 90 Ksi Fsu, 63 Ksi Ftu, 100 Degrees Flush Head, 450 Degrees F and 650 Degrees F
• NASM-21134 - Bolt, Tension, Steel, 180 Ksi Ftu, 450 Degrees F External Wrenching, Spline Drive, Fla
• NASM-21250 - Bolt, Tension, Steel, External Wrenching, Flanged, 12-Point, 180 Ksi Ftu, 450 Degrees F
• NASM-21262 - SCREWS, SELF LOCKING, 250 Degrees F, CYLINDRICAL HEAD, HEXAGONAL WRENCHING SOCKET, ALLOY STEEL, 160 KSI Ftu, (SOCKET HEAD CAP SCREWS)
• NASM-21287 - Screw, Machine, Steel, Drilled Double Hexagon, Extended Washer, .1640-36, (as8879 Thread)
• NASM-21295 - Screws, Self Locking, 250 Degrees F, Cylindrical Head, Hexagonal Wrenching Socket, Cres, 80 Ksi Ftu, (Socket Head Cap Screws)
• NASM-21296 - Bolt, Tension, Steel, 260 Ksi Ftu, 450 Degrees F, External Wrenching, Spline Drive, Fl
• NASM-21297 - Bolt, Tension, Steel, 220 Ksi Ftu, 450 Degrees F, External Wrenching, Spline Drive, Fl
• NASM-21 THRU 37 - Bolt, Clevis
• NASM-23964 - Bolt, Self-Retaining, Positive Locking
• NASM-27576 - Bolt, Self-Retaining, Impedance Type, 95 Ksi Fsu, Hex Head, 450 Degrees F
• NASM-27953 - Bolt, Hook, Turnbuckle, General Purpose
• NASM-33602 - Bolts, Self-Retaining, Aircraft, Reliability and Maintainability, Design and Usage Requirements For
• NASM-3369 - Bolt, Self-Retaining, Positive Locking, Cres, 90 Ksi Fsu, 63 Ksi Ftu, Hexagon Slotted Head, 450 Degrees F and 650 Degrees F
• NASM-35751 - Bolt, Square Neck, Round Head (Carriage), Steel, Cadmium or Zinc Plated, UNC-2a
• NASM-3 THRU 20 - Bolt - Machine, Aircraft
• NASM-42 THRU 49 - Bolt, Eye
• NASM-45908 - Bolt, Eye, General Specification For
• NASM-501 - Screw, Machine, Fillister Head, Fine Thread
• NASM-51417 - See: Nam-51417
• NASM-7838 - Bolt, Internal Wrenching, 160 Ksi Ftu
• NASM-7874 - Bolt, Machine, 1,200 Degrees F
• NASM-83050 - Bolt, Self-Retaining, Impedance Type
• NASM-85604 - Bolt, Nickel Alloy 718, Tension, High Strength, 125 Ksi Fsu and 220 Ksi Ftu, High Temperature, Spline Drive
• NASM-8831 - FASTENERS, ALLOY STEEL, 450 Degrees F EXTERNALLY THREADED, 180 KSI Ftu, 108 KSI Fsu, FATIGUE RATED
• NASM-8906 - Bolt, Alloy Steel, Shear and Tensile (132 Ksi Min Fsu and 220 Ksi Min Ftu), 450 Degrees F, Spline Drive, General Specification For
• NASM-8906/2 - Bolts, Shear, Steel, 132 Ksi Fsu, 450 Degrees F
• NASM-8907 - BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI MIN Fsu AND 260 KSI MIN Ftu), 450 -¦F, EXTERNAL WRENCHING, FLANGED HEAD
• QPL-23964 - Bolt, Self-Retaining, Positive Lock (No Superseding Document)
• QPL-7838 - Bolt, Internal Wrenching, 160 Ksi Ftu (No Superseding Document)
• QPL-7874 - Bolt, Machine, 1200 Deg. F (No Superseding Document)
• QPL-83050 - Bolt, Self Retaining, Impedance Type (No Superseding Document)
• QPL-85604 - Bolt, Nickel Alloy 718, Tension, High Strength, (125 Ksi Fsu and 220 Ksi Ftu) High Temperature, Spline Drive (No Superseding Document)
• QPL-85667 - Bolt, Sleeve, Straight Shank, Protruding and Flush Head, General Specification for (No Superseding Document)
• QPL-8831 - Bolt, 180 Ksi Ftu and 108 Ksi Fsu, 450 Deg. F Protruding and Flush Head, General Specification for (No Superseding Document)
• QPL-8906 - Bolt, Alloy Steel, Shear and Tensile, (132 Ksi Fsu and 220 Ksi Ftu, 450 Deg. F), Spline Drive, General Specification for (No Superseding Document)
• QPL-8907 - Bolt, Alloy Steel, Shear and Tensile, 156 Ksi Fsu and 260 Ksi Ftu, External Wrenching, Flanged Head (No Superseding Document)
• QPL-8961 - Fastener, Externally Threaded, 450 Deg. F and 1200 Deg. F, Self-Locking Element for (No Superseding Document)
• USAF-STD-60 - Bolt-Hexagon Head, Fine Thread (See Ms90726)
• USAF-STD-70 - Bolt - Carriage, With Nut