FSC 5305: Screws
The following documents are a part of this series:
ASTM:
US GOVERNMENT DOCUMENTS:
- A-A-53421 - Screw, Instrument, Spectacle Frame 7 or 5 Barrel Hinge
- A-A-53589 - Screw, Instrument, Spectacle Frame, 3-Barrel
- A-A-55604 - Screws, Wood, Round Head, Steel & Brass,Slotted & Cross-Recessed
- A-A-55605 - Screws, Wood, 82 Deg Flat Head, Steel & Brass Slotted & Cross-Recessed
- A-A-55613 - Screw, Machine, Round Head (for Electrical Use)
- A-A-55623 - Screw, Machine, 82 Degree and 100 Degree, Flat Countersunk Head, Slotted, Plastic (Nylon), UNC-2a and UNF-2a
- A-A-55624 - Screw, Machine, Pan Head, Slotted, Plastic (Nylon), UNC-2a
- A-A-60045 - Screws, Cadmium and Hexavalent-Chromium Free
- AN-115451 - 115500 - Screw, Machine - Steel, Flat Fillister Head, .250-28
- AN-115501 - 115550 - Screw - Flat Fillister Head, .3125-24
- AN-115651 - 115700 - Screw - Flat Fillister Head, Drilled Shank, .250-28
- AN-115701 - 115750 - Screw - Flat Fillister Head, Drilled Shank, .3125-24
- AN-115801 - 115850 - Screw - Flat Fillister, Drilled Head, .190-32
- AN-115851 - 115900 - Screw - Flat Fillister, Drilled Head, .250-20
- AN-115901 - 115950 - Screw - Flat Fillister, Drilled Head .250-28
- AN-115951 - 116000 - Screw - Flat Fillister Drilled Head, .3125-18
- AN-116001 - 116050 - Screw - Flat Fillister, Drilled Head, .3125-24
- AN-116051 - 116100 - Screw - Flat Fillister, Drilled Head .375-16
- AN-116101 - 116150 - Screw - Flat Fillister, Drilled Head, .375-24
- AN-116901 - 116912 - Screw - Oval Fillister Head, .112-40
- AN-116913 - 116924 - Screw - Oval Fillister Head, .112-40
- AN-116925 - 116960 - Screw - Oval Fillister Head, .138-32
- AN-116961 - 117000 - Screw - Oval Fillister Drilled Head, .138-32
- AN-117001 - 117040 - Screw - Oval Fillister Head, .164-32
- AN-117041 - 117080 - Screw - Oval Fillister Head, .164-32
- AN-15551 - 15600 - Screw Flat Fillister Head, .375-24
- AN-15701 - 15750 - Screw - Flat Fillister Head, Drilled Shank, .3125-24
- AN-15801 - 15850 - Screw - Flat Fillister, Drilled Head, .190&32
- AN-15851 - 15900 - Screw - Flat Fillister, Drilled Head, .250&20
- AN-16001 - 16050 - Screw - Flat Fillister, Drilled Head, .3125&24
- AN-16101 - 16150 - Screw - Flat Fillister, Drilled Head, .375&24
- AN-16901 - 16912 - Screw - Oval Fillister Head, .112-40
- AN-254 - Screw - Thumb, Necked (Supersedes Usaf Dwg. 36a4486 in Part)
- AN-255 - Screw - Externally Relieved Body
- AN-500 - Screw, Machine, Fillister Head, Coarse Thread
- AN-502 - Screw - Machine, Drilled Fillister Head, Fine Thread
- AN-503 - Screw - Machine, Drilled Fillister Head, Coarse Thread
- AN-505 - Screw, Machine, Flat Head, 82 Degree, Coarse Thread
- AN-506 - Screw, Tapping, Thread Cutting,82-Degree Flathead, Machine Screw Thread (Cancelled, No Superseding Document)
- AN-508 - Screw, Round Head Machine (for Electrical Use)
- AN-510 - Screw, Machine, Flat Head, 82 Degree, Fine Thread
- AN-525 - Screw, Washer Head
- AN-530 - Screw, Tapping, Thread Forming or Thread Cutting, Round Head (Cancelled, 1991, Use ms-51861)
- AN-531 - Screw, Tapping, Thread Forming or Thread Cutting, 82 Deg Flat Head, Spaced Thread
- AN-535 - Screw, Drive, Round Head (Cancelled, Use ms-21318)
- AN-540 - Screw - Lag, Gimlet Point (Use ms-16992)
- AN-545 - Screw Wood, Round Head (Use ms-35493 and ms-35495)
- AN-560 - Screw - Set, Sq. Hd. (Use an-565)
- AN-565 - Setscrew - Hexagon and Fluted Socket, Headless
- AND-10325 - Self Tapping Screws - Coarse Thread (Hole Sizes for)
- AND-10326 - Self Tapping Screws - Machine Screw Thread (Hole Sizes for)
- ANSI-B18.11 - Miniature Screws
- ANSI-B18.2.3.3M - Metric Heavy Hex Screws
- ANSI-B18.3.4M - Hexagon Socket Button Head Cap Screws (Metric Series)
- AS-115401 - 115450 - Screw - Flat Fillister Head, .190-32
- AS-115451 - 115500 - Screw, Machine - Steel, Flat Fillister Head, .250-28
- AS-115501 - 115550 - Screw - Flat Fillister Head, .3125-24
- AS-115551 - Screw - Flat Fillister Head, .3125-24
- AS-115601 - 115650 - Screw - Flat Fillister Head, Drilled Shank, .190-32
- AS-115651 - 115700 - Screw - Flat Fillister Head, Drilled Shank, .250-28
- AS-115801 - 115850 - Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel Uns g87400, 125 Ksi Min, .1900-32 UNF-3a
- AS-115951 - 116000 - Screw - Flat Fillister, Drilled Head, .3125-18
- AS-116001 - 116050 - Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3125-24 UNF-3A (STABILIZED Jul 2014)
- AS-116051 - 116100 - Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3750-16 UNC-3A (STABILIZED Jul 2014)
- AS-116101 - 116150 - Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3750-24 UNF-3A (STABILIZED Jul 2014)
- AS-116901 - 116912 - Screw - Oval Fillister Head, .112-40 (STABILIZED Feb 2012)
- AS-116913 - 116924 - Screw - Oval Fillister, Drilled Head, Cadmium Plated, Steel UNS K00802, .1120-40 UNC - 2A
- AS-116925 - 116960 - Screw - Oval Fillister Head, .138-32
- AS-116961 - 117000 - Screw - Oval Fillister Drilled Head, .138-32
- AS-117001 - 117040 - Screw - Oval Fillister Head, .164-32
- AS-117041 - 117080 - Screw - Oval Fillister Drilled Head, .164-32 (STABILIZED Feb 2012)
- AS-3098 - Screw, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .164-36 UNJF-3A
- AS-3568 - Screw, Drive, Round Head, Type U AMS 5504 (UNS S41000)
- AS-9207 - Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675 195 Ksi Min, .1640-36 UNJF-3A
- AS-9216 - Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .1640-36 UNJF-3A (STABILIZED Jan 2012)
- AS-9292 - Screw, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Black Oxide, Steel Uns g87400, 125 Ksi Min, .1380-40 UNJF-3a
- AS-9316 - Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, UNS K14675, 135 ksi Min, .1900-32 UNS-3A
- AS-9317 - Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .2500-28 Uns-3a, Ni-Cad Plate
- AS-9449 - Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3A
- AS-9450 - Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, UNS K14675, 195 ksi Min, .1640-36 UNJF-3A (STABILIZED Feb 2015)
- AS-9516 - Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1380-40 UNJF-3A (STABILIZED Feb 2015)
- AS-9517 - Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1640-36 UNJF-3A (STABILIZED Feb 2015)
- AS-9527 - Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1380-40 UNJF-3A
- AS-9528 - Screw, Machine Steel Uns g87400, Cadmium Plate, Drilled, 1 Hole Hexagon Head, .1640-36 UNJF-3a
- AS-9554 - Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A
- AS-9555 - Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .1640-36 UNJF-3A
- AS-9564 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .1640-36 UNJF-3a
- AS-9572 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A
- AS-9573 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .1640-36 UNJF-3a
- AS-9631 - Screw, Machine - Hexagon Head, Pd Shank, Titanium Ams 4967, .138-40 UNJF-3a
- AS-9712 - Screw, Machine - Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Nickel Alloy (Uns N07001), .1380-40 UNJF-3a
- ASME-B18.35M - Screw, Hexagon Socket Flat Countersunk Head Cap (Metric Series)
- CSA-ISO/IEC-8613-7 - Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures (Adopted ISO/IEC 8613-7:1994, second edition, 1994-11-01)
- DOD-T-63549 - Thumbscrew, Wing Head, Metric, General Specification for (Metric)
- DOD-T-63549/1 - Thumbscrew, Wing Head, Metric
- DOT-T-63549/1 - Thumbscrew, Wing Head, Metric
- DS-51409 - Setscrew, Slotted Headless, Cone Point Carbon Steel, Cadmiumplated, Metric
- DS-51410 - Setscrew, Slotted Headless, Cup Point, Carbon Steel, Cadmium Plated, Metric
- DS-51411 - Setscrew, Slotted Headless, Flat Point, Carbon Steel, Cadmium Plated, Metric
- DS-51474 - Screw, Cap, Hex Head, Fully Threaded (Metric)
- FF-S-103 - Setscrews (Cancelled, Superseded by FF-S-200 and FF-S-210)
- FF-S-107 - Screw, Tapping and Drive
- FF-S-109 - Screw, Wood,Cross-Recessed Head +Cancelled, S/Sby FF-S-111
- FF-S-111 - Screw, Wood
- FF-S-200 - Setscrews: Hexagon Socket and Spline Socket, Headless
- FF-S-210 - Setscrews: Square Head (Inch) and Slotted Headless (Inch and Metric)
- FF-S-85 - Screw, Cap, Slotted & Hexagon Head
- FF-S-86 - Screw, Cap, Socket-Head
- FF-S-88 - Screw, Eye
- FF-S-89 - Screw, Instrument (Cancelled, No S/S Document)
- FF-S-92 - Screw, Machine, Slotted, Cross-Recessed or Hexagon Head
- FF-T-305 - Thumbscrew
- MA-4187 - Bolt, Machine, Spline Drive, Special Extended Washer, Reduced Head, Pd Shank, AMS 5662, Me
- MIL-B-87114 - Bolts, Recess Drive, General Specification for (Superseded by NAS-4002 and NAS-4003)
- MIL-B-87114/4 - Bolt, Hex Head, Cross Recess, Full Thread, A-286 CRES, 160 KSI FTU (Superseded by NAS-1802)
- MIL-B-87114/COMPLETE - Complete Set of Slash Sheets (Cancelled)
- MIL-F-18240 - Fastener Element, Self-Locking, Threaded Fastner, 250 Deg F Maximum
- MIL-S-21472 - Screw, Shoulder, Hexagon Socket-Head and Slotted-Head General Specification for (Superseded by NASM-21472)
- MIL-S-24240 - Screw, Collar, 12-Point, External Wrenching (Future Acquisition Use SAE 358, Flanged 12-Point Screws)
- MIL-S-24240/1 - Screw, Collar, 12-Point, External Wrenching Unified Coarse Thread, Class 3a (No Superseding Document)
- MIL-S-24240/2 - Screws, Collar, 12 Point, External Wrenching Unified Fine Thread, Class 3a (No Superseding Document)
- MIL-S-24240/3 - Screws, Collar, 12-Point, External Wrenching Unified Coarse Thread, Class 3a (Superseded by SAE-J58, Flanged 12-Point Screws)
- MIL-S-24240/4 - Screws, Collar, 12-Point, External Wrenching Unified Fine Thread, Class 3a (Superseded by SAE-J58 Flanged 12-Point Screws)
- MIL-S-24240/5 - Screw, Collar, 12-Point, External Wrenching Unified Coarse Thread, Class 3a (No Superseding Document)
- MIL-S-24240/6 - Screw, Collar, 12-Point, External Wrenching Unified Fine Thread, Class 3a (No Superseding Document)
- MIL-S-6033 - Screws, Self-Tapping Steel, Aircraft (Superseded by FF-S-107a)
- MIL-S-7839 - Screw, Structural, Aircraft (Superseded by NASM-7839)
- MIL-S-82496 - Screws, Machine, Self Sealing, Integral O-Ring (Superseded by NASM-82496)
- MIL-S-971 - Screw, Wood
- MS-14188 - Screw, Cap, Socket Head, Square 160 Ksi, Uts
- MS-14191 - Recess, Offset Cruciform, Ribbed Dimensions of Recess, Gage and Driver for (Superseded by NASM-14191)
- MS-15981 - Fasteners, Externally Threaded, Self-Locking, Design and Usage Limitations for (Superseded by NASM-15981)
- MS-15984 - Screw-Self-Locking, 100 Flat Head, 250 Deg F
- MS-15985 - Screw-Machine, Self-Locking, Washer Head, 250 Deg F
- MS-16198 - Screws, Wood, Slotted Round Head, Austenitic Corrosion Resisting Steel, Non-Magnetic
- MS-16199 - Screws, Wood, Slotted, Flat Countersunk (82 Deg.) Head, Copper-Silicon Alloy, Nonmagnetic
- MS-16200 - Screws, Machine, Pan Head, Slotted, Corrosion Resisting Steel, Passivated, UNC-2a Nonmagnetic (Superseded by ms-51957)
- MS-16215 - Screws, Wood, Slotted Oval Head 82 Deg. Austenitic, Corrosion Resisting Steel, Nonmagnetic
- MS-16216 - Screws, Wood, Slotted Round Head, Copper-Silicon Alloy, Nonmagnetic
- MS-16217 - Screws, Wood, Slotted Flat Head, 82 Degree, Austenitic, Corrosion-Resisting Steel, Nonmagnetic
- MS-16218 - Screws, Machine, Flat Countersunk Head, Slotted, Copper-Silicon Alloy, UNC-2a, Nonmagnetic (Superseded by NASM-16218)
- MS-16219 - Screws, Machine, Flat Countersunk Head, Slotted, Nonmagnetic, Corrosion Resisting Steel, Passivated, UNC-2a
- MS-16268 - Screws, Machine, 100 Degree Flat Countersunk Head,Slotted, Nylon, Class 2a
- MS-16269 - Setscrew, Bronze, Slotted, Flat Point
- MS-16637 - Screw, Shoulder, Socket Head, Hexagon Alloy Steel, Uncoated, UNC-3a (Use ms-51975)
- MS-16638 - Screw, Shoulder, Socket Head, Hexagon Alloy Steel, Cadium or Zinc Plated, UNC-3a (Use ms-51975)
- MS-16995 - Screw, Cap, Socket Head-Hexagon, Corrosion Resistant Steel, UNC-3a (Superseded by NASM-16995)
- MS-16996 - Screw, Cap, Socket Head-Hexagon, Corrosion Resistant Steel, UNF-3a (Superseded by NASM-16996)
- MS-16997 - Screw, Cap, Socket Head and Screw, Cap, Socket Head, Self-Locking, Alloy Steel, Cadmium Plated, UNC-3a (Superseded by NAS1352)
- MS-16998 - Screw, Cap, Socket Head and Screw, Cap, Socket Head, Self-Locking: Alloy Steel, Cadmium Plated, UNF-3a (Superseded by NAS1351)
- MS-16999 - Head Discontinuities Bolts and Screws
- MS-18063 - Setscrew, Hexagon Socket, Cup Point, 250 Deg. F Self Locking Element, Alloy Steel, Cadmium Plated (Superseded by NASM-18063)
- MS-18064 - Setscrew, Hexagon Socket, Cup Point, 250 Deg. F Self Locking Element, Corrosion Resisting Steel, Passivated (Superseded by NASM-18064)
- MS-18065 - Set Screw, Hexagon Socket, Flat Point, 250 Deg. F Self Locking Element, Alloy Steel, Cadmium Plated (No Superseding Document)
- MS-18066 - Set Screw, Hexagon Socket, Flat Point, 250 Deg. F, Self Locking Element, Corrosion Resisting Steel, Passivated (No Superseding Document)
- MS-18067 - Setscrew, Hexagon Socket, Cone Point, 250 Deg. F, Self Locking Element, Alloy Steel, Cadmium Plated (Superseded by NASM-18067)
- MS-18068 - Set Screw, Hexagon Socket, Cone Point, 250 Deg. F, Self Locking Element, Corrosion Resisting Steel, Passivated (No Superseding Document)
- MS-18153 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Alloy Steel, Grade 8, Zinc Coated, UNF-2a, Plain and Self-Locking (Superseded by ANSI-B18.2.1)
- MS-18154 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Alloy Steel Grade 8, Zinc Coated, UNC-2a, Plain and Self-Locking (Superseded by ANSI-B18.2.1)
- MS-18211 - Screw, Machine, 82 Deg. and 100 Deg., Flat Countersunk Head, Slotted, Plastic (Nylon), UNC-2a and UNF-2a (Superseded by A-A-55623)
- MS-18212 - Screw, Machine, Pan Head, Slotted, Plastic (Nylon), UNC-2a (Superseded by A-A-55624)
- MS-21090 - Screw, Self-Locking, 250 Deg. F, Steel, 55 Ksi Ftu, Panhead, Cross Recessed (Superseded by NASM-21090)
- MS-21093 - Screw, Self-Locking, 250 Deg. F, Steel, 55 Ksi Ftu, 100 Deg. Flat Head, Cross Recessed (Superseded by NASM-21093)
- MS-21207 - Screw, Tapping, 100 Degree Flat Head, Spaced Thread (Superseded by NASM-21207)
- MS-21262 - Screws, Self Locking, 250 Deg. F, Cylindrical Head Hexagonal Wrenching Socket, Alloy Steel, 160 Ksi Ftu (Socket Head Cap Screws) (Superseded by NASM-21262)
- MS-21268 - Screw, Instrument - Filister Head
- MS-21269 - Screw, Instrument - Pan Head (No Superseding Document)
- MS-21270 - Screw, Instrument - 100 Degree Flat Head
- MS-21271 - Screw, Instrument - Binding Head
- MS-21295 - Screws, Self Locking, 250 Deg. F, Cylindrical Head, Hexagonal Wrenching Socket, Corrosion Resisting Steel, 80 Ksi Ftu (Socket Head Cap Screws) (Superseded by NASM-21295)
- MS-21316 - Thumbscrew (Shouldered), Flat Point, Carbon Steel, Cadmium Plated, UNC-2a
- MS-21317 - Thumbscrew (Without Shoulder), Carbon Steel, Cadmium or Zimc Plated, NC-2a and UNC-2a (Use ms-21316)
- MS-21318 - Screw, Drive, Round Head, Type U, Steel, Carbon, Cadmium Plated (Superseded by NASM-21318)
- MS-21342 - Setscrew, Fluted Socket, Alloy Steel, Cadmium Plated UNC-3a (No Superseding Document)
- MS-24583 - Screw, Machine - Flat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated (No Superseding Document)
- MS-24584 - Screws, Machine-Pan Head, Cross-Recessed, Carbon Steel, Cadmium Plated (Use ms-35206 and ms-35207)
- MS-24615 - Screw, Tapping-Thread Forming, Type a, Flat 82 Degrees Countersunk Head, Cross Recessed, Steel, Carbon, Cadium Plated (Use ms-51862)
- MS-24616 - Screw, Tapping-Thread Forming, Type a, Flat 82 Degrees Countersunk Head, Cross Recessed, Corrosion Resisting S (Use ms-51862)
- MS-24617 - Screw, Tapping-Thread Forming, Type a, Pan Head, Cross Recessed, Steel, Carbon, Cadmium Plated (Use ms-51861)
- MS-24618 - Screw, Tapping-Thread Forming, Type a, Pan Head, Cross Recessed, Corrosion Resisting Steel (Use ms-51861)
- MS-24619 - Screw, Tapping-Thread Forming, Type B, Flat 82 Degrees Countersunk Head, Cross-Recessed, Carbon Steel (Use ms-51862)
- MS-24620 - Screw, Tapping-Thread Forming, Type B, Flat 82 Deg. Countersunk Head, Cross-Recessed, Corrosion-Resisting Steel (Use Ms 51862)
- MS-24621 - Screw, Tapping-Thread Forming, Type B, Pan Head, Cross-Recessed, Carbon Steel (Use ms-51861)
- MS-24622 - Screw, Tapping-Thread Forming, Type B, Pan Head, Cross-Recessed, Corrosion-Resisting Steel (Use Ms 51861)
- MS-24623 - Screw, Tapping-Thread Cutting, Type Bf or BT, Flat 82 Degrees Countersunk Head, Cross-Recessed, Carbon Steel (Use ms-24627)
- MS-24624 - Screw, Tapping-Thread Cutting, Type Bf or BT, Flat 82 Deg. Countersunk Head, Cross-Recessed, Corrosion-Resisting Steel (Use Ms 24628)
- MS-24625 - Screw, Tapping-Thread Cutting, Type Bf or BT, Pan Head, Cross-Recessed, Carbon Steel (Superseded by NASM-24625)
- MS-24626 - Screw, Tapping-Thread Cutting, Type Bf or BT, Pan Head, Cross-Recessed, Corrosion-Resisting Steel
- MS-24627 - Screw, Tapping-Thread Cutting, Types D, F, g or T, Flat 82 Deg. Countersunk Head, Cross-Recessed, Carbon Steel (Superseded by NASM-24627)
- MS-24628 - Screw, Tapping-Thread Cutting, Types D,F,g or T, Flat 82 Deg. Countersunk Head, Cross-Recessed, Corrosion-Resisting Steel (Superseded by NASM-24628)
- MS-24629 - Screw, Tapping-Thread Cutting, Types D, F, g or T Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated (Superseded by NASM-24629)
- MS-24630 - Screw, Tapping-Thread Cutting, Types D, F, g or T, Pan Head, Cross-Recessed, Corrosion Resisting Steel (Superseded by NASM-24630)
- MS-24631 - Approximate Hole Sizes for Type-a Hardened Thread Forming Tapping Screws
- MS-24632 - Screw, Tapping, Thread Forming- Types Ab, B and Bp, Approximate Hole Sizes For
- MS-24633 - Screw, Tapping-Thread Cutting, Types Bf and BT, Approximate Hole Sizes For
- MS-24634 - Screw, Tapping, Thread Cutting-Types D, F, g and T, Approximate Hole Sizes for (Superseded by NASM-24634)
- MS-24635 - Screw, Tapping, Thread Forming, Type a, Flat Countersunk.Head Slotted, Steel, Carbon Plated (Use ms-24615)
- MS-24636 - Screw, Tapping, Thread Forming, Type a, Flat Countersunk Head, Slotted, Steel, Corrosion Resisting
- MS-24637 - Screw, Tapping, Thread Forming, Type a, Pan Head, Slotted Steel, Carbon, Cadmium Plated
- MS-24638 - Screw, Tapping, Thread Forming, Type a, Pan Head, Slotted, Steel, Corrosion Resisting
- MS-24639 - Screw, Tapping, Thread Forming, Type B, Flat Countersunk Head, Slotted, Steel, Carbon, Cadmium Plated
- MS-24640 - Screw, Tapping, Thread Forming, Type B, Flat Countersunk Head, Slotted, Steel, Corrosion Resisting
- MS-24641 - Screw, Tapping, Thread Forming, Type B, Pan Head, Slotted, Steel, Carbon, Cadmium Plated
- MS-24642 - Screw, Tapping, Thread Forming, Type B, Pan Head, Slotted, Steel, Corrosion Resisting
- MS-24643 - Screw, Tapping, Thread Cutting, Spaced Threads, Flat Head, Slotted, Types Bf, Bg, or BT, Steel, Carbon, Cadmium Plated
- MS-24644 - Screw, Tapping, Thread Cutting, Spaced Threads, Flat Head, Slotted, Types Bf, Bg, or BT, Steel, Corrosion Resisting
- MS-24645 - Screw, Tapping, Thread Cutting, Spaced Threads, Types 8F, Bg or BT, Pan Head, Slotted, Steel, Carbon, Cadmium Plated
- MS-24646 - Screw, Tapping, Thread Cutting, Spaced Threads, Types Bf, Bf or BT, Pan Head, Slotted, Steel, Corrosion Resisting (Use ms-24626)
- MS-24647 - Screw, Tapping, Thread Cutting, Types D, F, g or T, Flat Countersunk Head, Slotted Steel, Carbon, Cadmium Plated
- MS-24648 - Screw, Tapping, Thread Cutting, Types D, F, g or T, Flat Countersunk Head, Slotted, Steel, Corrosion Resisting
- MS-24649 - Screw, Tapping, Thread Cutting, Types F, D, g, or T, Pan Head, Slotted, Steel, Carbon, Cadmium Plated
- MS-24650 - Screw, Tapping, Thread Cutting, Types F, D, g or T, Pan Head, Slotted, Steel, Corrosion Resisting
- MS-24667 - Screw, Cap, Socket Head, Flat Countersunk, 82 Deg., Alloy Steel UNC-3a (Superseded by NASM-24667)
- MS-24668 - Screw, Cap, Socket Head, Flat Countersunk, Alloy Steel, Cadmium Plated, UNF-3a (Cancelled without replacement)
- MS-24669 - Screw, Cap, Socket Head, Flat Countersunk, Alloy Steel, Uncoated, UNC-3a (Superseded by ms-24667)
- MS-24670 - Screw, Cap, Socket Head, Flat Countersunk, Alloy Steel, Uncoat*D, UNF-3a
- MS-24671 - Screw, Cap, Socket-Head, Flat Countersunk, 82 Deg., Corrosion Resisting Steel, Unc - 3a (Superseded by NASM-24671)
- MS-24672 - Screw, Cap, Socket Head, Flat Countersunk, Corrosion Resisting Steel, UNF-3A
- MS-24673 - Screw, Cap, Socket Head, Hexagon, Drilled Corrosion Resisting Steel (UNF-3a) (Superseded by NASM-24673)
- MS-24674 - Screw, Cap, Socket-Head, Hexagon, Drilled Corrosion Resisting Steel (UNC-3a) (Superseded by NASM-24674)
- MS-24675 - Screw, Cap, Socket Head, Hexagon, Drilled Alloy Steel, Uncoated (UNF-3a) (Use Ms 24678)
- MS-24676 - Screw, Cap-Socket Head, Hexagon, Drillsd Alloy Steel, Uncoated (UNC-3a) (Use ms-24677)
- MS-24677 - Screw, Cap, Socket Head, Hexagon, Drilled Alloy Steel, (UNC-3a) (Superseded by NASM-24677)
- MS-24678 - Screw, Cap, Socket Head, Hexagon, Drilled Alloy Steel, (UNF-3a) (Superseded by NASM-24678)
- MS-24693 - Screw, Machine, Flat Countersunk Head, 100 Deg., Cross Recessed, UNC-2a and UNF-2a (Superseded by NASM-24693)
- MS-24694 - Screw, Machine, Flat Countersunk Head, 100 Deg., Structural, Cross Recessed, UNC-3a and UNF-3a (Superseded by NASM-24694)
- MS-25087 - Screw, Externally Relieved Body (Superseded by NASM-25087)
- MS-25332 - Screw and Washer Assembly, Relay Socket Mounting
- MS-27039 - Screw, Machine - Pan Head, Structural, Cross Recessed (SUPERSEDED BY NASM-27039)
- MS-27577 - Screw, Close Tolerance, 95 Ksi Fsu, Flush Head, 450 Deg. F (Superseded by NASM-27577)
- MS-3212 - Screws, Machine, Pan Head, Cross-Recessed, Self-Sealing, Integral Silicone O-Ring, Plain and Self-Locking (Superseded by NASM-3212)
- MS-3213 - Screws, Machine, Pan Head, Cross Recessed, Self Sealing, Integral Fluorosilicone O-Ring, Plain and Self Locking (Superseded by NASM-3213)
- MS-33648 - Elements, Self-Locking, 250 Deg F Externally Threaded Fastener, Design Information for (Asg) (Use MIL-F-18240, Figure 1)
- MS-33749 - Screw - Installation and Limitations for Usage of Thread Cutting and Thread Forming (Superseded by NASM-33749)
- MS-35188 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, PLAIN FINISH, NC-2A and UNC-2A
- MS-35189 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, PLAIN FINISH, NF-2A and UNF-2A
- MS-35190 - Screw, Machine-82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNC-2 (Superseded by NASM-35190)
- MS-35191 - Screw, Machine-82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNF-2a (Superseded by NASM-35191)
- MS-35192 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM OR ZINC PLATED, NC-2A and UNC-2A
- MS-35193 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM OR ZINC PLATED, NF-2A and UNF-2A
- MS-35194 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, PHOSPHATE COATED, NC-2A and UNC-2A
- MS-35195 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, PHOSPHATE COATED, NF-2A and UNF-2A
- MS-35196 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, BRASS, PLAIN FINISH, NC-2A and UNC-2A
- MS-35197 - SCREW, MACHINE, FLAT COUNTERSUNK HEAD, CROSS-RECESSED, BRASS, PLAIN FINISH, NF-2A and UNF-2A
- MS-35198 - Screw, Machine-Flat Countersunk Head, 82 Deg., Cross-Recessed, Brass, UNC-2a (Superseded by NASM-35198)
- MS-35199 - Screw, Machine-Flat Countersunk Head, 82 Deg., Cross-Recessed, Brass, Black-Chemical Finish, UNF-2a (Superseded by NASM-35199)
- MS-35200 - Screw, Machine, Flat Countersunk Head, Cross-Recessed, Corrosion Resisting Steel, Passivated, NC-2a - UNC-2a (Superseded by ms-51959)
- MS-35201 - Screw, Machine, Flat Countersunk Head, Cross-Recessed, Corrosion Resisting Steel, Passivated, NF-2a.- UNF-2a (Use ms-51960)
- MS-35202 - Screw, Machine-Flat Countersunk Head, 82 Deg., Cross-Recessed, Aluminum Alloy, Anodic Coated, UNC-2a (Superseded by NASM-35202)
- MS-35203 - Screw, Machine-Flat Countersunk Head, 82 Degrees, Cross-Recessed, Aluminum Alloy, Anodic Coated, UNF-2A (SUPERSEDED by NASM-35203)
- MS-35204 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel, Plain Finish, NC-2a - UNC-2a (Use ms-35206)
- MS-35205 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel, Plain Finish, NF-2a - UNF-2a (Use ms-35207)
- MS-35206 - Screw, Machine-Pan Head, Cross-Recessed Carbon Steel, Cadmium Plated, UNC-2a (Superseded by NASM-35206)
- MS-35207 - Screw, Machine-Pan Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNF-2a (in./mm) (Superseded by NASM-35207)
- MS-35208 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel, Cadium or Zinc Plated, NC-2A-UNC-2a (Superseded by ms-35206D)
- MS-35209 - SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM OR ZINC PLATED, NF-2A and UNF-2A
- MS-35210 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel, Phosphate Coated, NC-2a - UNC-2a (Use ms-35206)
- MS-35211 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel, Phosphate Coated, NF-2a - UNF-2a (Use ms-35207)
- MS-35212 - SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, BRASS, PLAIN FINISH, NC-2A and UNC-2A
- MS-35213 - SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, BRASS, PLAIN FINISH, NF-2A and UNF-2A
- MS-35214 - Screw, Machine-Pan Head, Cross-Recessed, Brass, UNC-2a (Superseded by NASM-35214)
- MS-35215 - Screw, Machine-Pan Head, Cross-Recessed, Brass, UNF-2a (Superseded by NASM-35215)
- MS-35216 - Screw, Machine, Pan Head, Cross Recessed, Corrosion Resisting Steel, Passivated, NC-2a - UNC-2a (Superseded by ms-51957)
- MS-35217 - Screw, Machine, Pan Head, Cross-Recessed, Corrosion Resisting Steel, Passivated, NF-2a - UNF-2a (Superseded by ms-51958)
- MS-35218 - Screw, Machine-Pan Head, Cross-Recessed, Aluminum Alloy, UNC-2a
- MS-35219 - Screw, Machine-Pan Head, Cross-Recessed, Aluminum Alloy, UNF-2a
- MS-35221 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Plain Finish, NC-2a and UNC-2a
- MS-35222 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Plain Finish, NF-2a and UNF-2a (Superseded by ms-35207)
- MS-35223 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Cadmium Plated, NC-2A and UNC-2A
- MS-35224 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Cadmium Plated, NF-2a and UNF-2a
- MS-35225 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Cadmium or Plated, NC-2a and UNC-2a
- MS-35226 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Cadmium or Zinc Plated, NF-2a and UNF-2a
- MS-35227 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Phosphate Coated, NC-2a and UNC-2a
- MS-35228 - Screw, Machine, Pan Head, Slotted, Carbon Steel, Phosphate Coated, NF-2a and UNF-2a
- MS-35229 - Screw, Machine, Pan Head, Slotted, Brass, Plain Finish, NC-2a and UNC-2a (Use ms-35214)
- MS-35230 - Screw, Machine, Pan Head, Slotted, Brass Plain Finish, NF-2a and UNF-2a (Superseded by ms-35215)
- MS-35231 - Screw, Machine, Pan Head, Slotted, Brass, Black Oxide Finish, NC-2a and UNC-2a (Superseded by ms-35214)
- MS-35232 - Screw, Machine, Pan Head, Slotted, Brass, Black Oxide Finish, NF-2a and UNF-2a
- MS-35233 - Screw, Machine, Pan Head, Slotted Corrosion Resisting Steel, Passivated, NC-2A-UNC-2a (Superseded by ms-51957)
- MS-35234 - Screw, Machine, Pan Head, Slotted, Corrosion Resisting Steel, Passivated, NF-2a and UNF-2a (Superseded by Ms 51958)
- MS-35235 - Screw, Machine, Pan Head, Slotted, Aluminum Alloy, Anodized, NC-2a and UNC-2a
- MS-35236 - Screw, Machine, Pan Head, Slotted, Aluminum Alloy, Anodized, NF-2a and UNF-2a
- MS-35237 - Screw,Machine,Flat Countersunk Head, Slotted, Carbon Steel, Plain Finish, NC-2a and UNC-2a (Use ms-35190)
- MS-35238 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Plain Finish, NF-2a and UNF-2a (Superseded by Ms 35191 )
- MS-35239 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Cadmium Plated, NC-2a and UNC-2a (Superseded by ms-35190)
- MS-35240 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Cadium Plated, NF-2a and UNF-2a (Superseded by Ms 35191)
- MS-35241 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Cadmium or Zinc Plated, NC-2a and UNC-2a (Use Ms 35190)
- MS-35242 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Cadium or Zinc Plated, NF-2a and UNF-2a (Supersed by Ms 35191)
- MS-35243 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Phosphate Coated, NC-2a and UNC-2a (Superseded by Ms 35190)
- MS-35244 - Screw, Machine, Flat Countersunk Head, Slotted, Carbon Steel, Phosphate Coated, NF-2a and UNF-2a
- MS-35245 - Screw, Machine, Flat Countersunk Head, Slotted, Brass, Plain Finish, NC-2a, and UNC-2a (Use ms-35198)
- MS-35246 - Screw, Machine, Flat Countersunk Head, Slotted, Brass, Plain Finish, NF-2a and UNF-2a
- MS-35247 - Screw, Machine, Flat Countersunk Head, Slotted, Brass, Black Oxide Finish, NC-2a and UNC-2a
- MS-35248 - Screw, Machine, Flat Countersunk Head, Slotted, Brass, Black Oxide Finish, NF-2a and UNF-2a
- MS-35249 - Screw, Machine, Flat Countersunk Head, Slotted, Corrosion Resisting Steel, Passivated, NC-2a and UNC-2a Superseded by ms-51959 or ms-24671
- MS-35250 - Screw, Machine, Flat, Countersunk Head, Slotted, Corrosion Resisting Steel, Passivated NF-2a and UNF-2a (Superseded by ms-51960)
- MS-35251 - Screw, Machine, Flat Countersunk Head, Slotted, Aluminum Alloy, Anodized, NC-2a and UNC-2a
- MS-35262 - Screw, Machine, Flat Countersunk Head, Slotted, Aluminum Alloy, Anodized, NF-2a and UNF-2a
- MS-35263 - Screw, Machine, Drilled Fillister Head, Slotted, Carbon Steel, Plain Finish, NC-2a and UNC-2a
- MS-35264 - Screw, Machine, Drilled Fillister Head, Slotted, Carbon Steel, Plain Finish, NF-2a and UNF-2a
- MS-35265 - Screw, Machine Drilled Fillister Head, Slotted, Carbon Steel, UNC-2a
- MS-35266 - Screw, Machine-Drilled Fillister Head, Slotted, Carbon Steel, UNF-2a
- MS-35267 - Screw, Machine, Dirlled Fillister Head, Slotted, Carbon Steel, Cadmium or Zinc Plated NC-2a and UNC-2a
- MS-35268 - Screw, Machine, Drilled Fillister Head, Slotted, Carbon Steel, Cadmium or Zinc Plated, NF-2a and UNF-2a
- MS-35269 - Screw, Machine, Drilled Fillister Head, Slotted, Carbon Steel, Phosphate Coated, NC-2a and UNC-2a
- MS-35270 - Screw, Machine, Drilled Fillister Head, Slotted, Carbon Steel, Phosphate Coated, NF-2a and UNF-2a
- MS-35271 - Screw, Machine, Drilled, Fillister Head, Slotted, Brass, Plain Finish, NC-2a and UNC-2a (Superseded by ms-35273)
- MS-35272 - Screw, Machine-Drilled Fillister Head, Slotted, Brass, Plain Finish NF-2a and UNF-2a (Superseded by ms-35274)
- MS-35273 - Screw, Machine-Drilled Fillister Head, Slotted, Brass, Black Chemical Finish, UNC-2a (Superseded by NASM-35273)
- MS-35274 - Screw, Machine-Drilled Fillister Head, Slotted, Brass, Black Chemical Finish, UNF-2a (Superseded by NASM-35274)
- MS-35275 - Screw, Machine-Drilled Fillister Head, Slotted, Corrosion Resisting Steel, Passivated, UNC-2A (SUPERSEDED BY NASM-35275)
- MS-35276 - Screw, Machine-Drilled Fillister Head, Slotted, Corrosion Resisting Steel, Passivated, UNF-2a (Superseded by NASM-35276)
- MS-35277 - Screw, Machine-Drilled Fillister Head, Slotted, Aluminum Alloy, UNC-2a
- MS-35278 - Screw, Machine-Drilled Fillister Head, Slotted, Aluminum Alloy, UNF-2a
- MS-35289 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Low Carbon Steel, Plain Finish, UNC-2a
- MS-35290 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Low Carbon Steel, Plain Finish, UNF-2a
- MS-35291 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Low Carbon Steel, Cadmium or Zinc Finish, UNC-2a
- MS-35292 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Low Carbon Steel, Cadmium or Zinc Finish, UNF-2a
- MS-35293 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Low Carbon Steel, Phosphate Finish, UNC-2a
- MS-35294 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Low Carbon Steel, Phosphate Finsih, UNF-2a
- MS-35295 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Medium Carbon Steel, Plain Finish UNC-2a
- MS-35296 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Medium Carbon Steel, Plain Finish, UNF-2a
- MS-35297 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Medium Carbon Steel, Cadmium or Zinc Finish, UNC-2a
- MS-35298 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Medium Carbon Steel, Cadmium of Zinc Finish, UNF-2a
- MS-35299 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Medium Carbon Steel, Phosphate Finish, UNC-2a
- MS-35300 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Medium Carbon Steel, Phosphate Finish, UNF-2a
- MS-35301 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Plain Finish, UNC-2a
- MS-35302 - Screw, Cap, Hexagon Head (Finished Hexacon Bolt), Alloy Steel, Plain Finish, UNF-2a
- MS-35303 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Cadmium of Zinc Finish, UNC-2a
- MS-35304 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Cadmium or Zinc Finish, UNF-2a
- MS-35305 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Phosphate Finish, UNC-2a
- MS-35306 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Phosphate Finish, UNF-2a
- MS-35307 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivation
- MS-35308 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivated, UNF-2a (Superseded by NASM-35308)
- MS-35309 - Screw, Cap, Hexagon Head - Naval Brass, Plain Finish, UNC-2A
- MS-35310 - Screw, Cap, Hexagon Head, Naval Brass, Plain Finish, UNF-2a
- MS-35311 - Screw, Cap, Hexagon Head, Nickel-Copper Alloy, Plain Finish UNF-2a
- MS-35312 - Screw, Cap, Hexagon Head, Nickel-Copper Alloy, Plain Finish, UNF-2a
- MS-35313 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Aluminum Alloy, Anodized Finish, UNC-2a
- MS-35314 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Aluminum Alloy, Anodized Finish, UNF-2a
- MS-35354 - Bolt, Machine, Square Head, (Unfinished), Steel, Uncoated, UNC-2a (Superseded by ms-35355)
- MS-35357 - Screw, Machine, Round Head, Slotted
- MS-35358 - Screw, Machine, Oval Head, Slotted
- MS-35359 - Screw, Machine, Binding Head, Slotted
- MS-35360 - Screw, Machine-Truss Head, Slotted (Superseded by ms-35206 in Part, ms-35207 in Part, ms-35215 in Part, ms-35218 in Part, and ms-35219 in Part)
- MS-35361 - Screw, Machine, Fillister Head, Slotted
- MS-35362 - Screw, Machine, Round Head, Cross Recessed
- MS-35363 - Screw, Machine, Oval Head, Cross Recessed
- MS-35364 - Screw, Machine, Binding Head, Cross Recessed
- MS-35365 - Screw, Machine, Truss Head, Cross Recessed
- MS-35366 - Screw, Machine, Fillister Head, Cross Recessed
- MS-35455 - Screw, Cap, Socket Head-Hexagon, Alloy Steel, Uncoated, UNC-3a
- MS-35456 - Screw, Cap, Socket Head - Hexagon, Alloy Steel, Uncoated, UNF-3A
- MS-35457 - Screw, Cap, Socket Head Hexagon, Alloy Steel, Cadmium or Zinc, UNC-3a
- MS-35458 - Screw, Cap, Socket Head - Hexagon, Alloy Steel, Cadmium or Zinc, UNF-3a
- MS-35459 - Screw, Cap, Socket Head - Hexagon, Alloy Steel, Phosphate, UNC-3A
- MS-35460 - Screw, Cap, Socket Head - Hexagon, Alloy Steel, Phosphate, UNF-3A
- MS-35461 - Screw, Cap, Socket Head - Hexagon, Steel, Corrosion Resisting, Passivated, UNC-3a
- MS-35492 - Screw, Wood, Flat Head, Cross-Recessed, Steel and Brass
- MS-35493 - Screw, Wood, Round Head, Cross-Recessed, Steel and Brass
- MS-35494 - Screw, Wood, Flat Head, Slotted, Steel and Brass
- MS-35495 - Screw, Wood, Round Head, Slotted, Steel and Brass
- MS-35646 - Screw, Eye, Steel or Brass
- MS-35795 - Screw, Wood, ( 14,2-Inch, Round Head Hot Galvanized (Pole-Line) (No Superseding Document)
- MS-51017 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Cadmium or Zinc, NC-3A and UNC-3A (Use MS 51963)
- MS-51018 - Setscrew, Hexagon Socket, Cup Point Alloy Steel, Cadmium or Zinc, NF-3a and UNC-3a (Superseded by ms-51964)
- MS-51019 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Phosphate Coated, NC 3a and Unc 3a (Superseded by ms-51963)
- MS-51020 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Phosphate Coated, NF-3A and UNF-3A
- MS-51021 - Setscrew-Hexagon Socket, Cup Point, Corrosion Resisting (Chrome-Nickel) Steel, Passivated, UNC-3a Plain and Self Locking (Superseded by NASM-51021)
- MS-51022 - Setscrew, Hexagon Socket, Cup Point, Corrosion Resisting (Chromium) Steel, Passivated, NC-3a and UNC-3a (Use ms-51021)
- MS-51023 - Setscrew-Hexagon Socket, Cup Point, Corrosion-Resisting Steel, Passivated, UNF-3a, Plain and Self-Locking (Superseded by NASM-51023)
- MS-51024 - Setscrew, Hexagon Socket, Cup Point, Corrosion Resisting (Chromium) Steel, Passivated, NF-3a and UNF-3a (Use ms-51023)
- MS-51025 - Setscrew, Heagon Socket, Flat Point, Alloy Steel, Cadmium or Zinc, NC-3a and UNF-3a (Superseded by ms-51965)
- MS-51026 - Setscrew, Hexagon Socket, Flat Point, Aloy Steel, Cadium or Zinc, NF-3a and UNF-3a (Use ms-51966)
- MS-51027 - Setscrew, Hexagon Socket, Flat Point, Alloy Steel, Phosphate Coated, NC-3a and UNC-3a (Superseded by ms-51965)
- MS-51028 - Setscrew, Hexagon Socket, Flat Point, Alloy Steel, Phosphate Coated, NF-3a and UNF-3a (Superseded by ms-51966)
- MS-51029 - Setscrew-Hexagon Socket, Flat Point, Corrosion-Resisting Steel, Passivated, UNC-3a, Plain and Self-Locking (Superseded by NASM-51029)
- MS-51030 - Setscrew, Hexagon Socket, Flat Point, Corrosion Resisting (Chromium) Steel, Passivated, NC-3a and UNC-3a (Use ms-51029)
- MS-51031 - Setscrew-Hexagon Socket, Flat Point, Corrosion-Resisting Steel, Passivated, UNF-3a, Plain and Self-Locking (Superseded by NASM-51031)
- MS-51032 - Setscrew-Hexagon Socket, Flat Point, Corrosion Resisting (Chrome-Nickel) Steel, Passivated, UNF-3a (Use ms-51031)
- MS-51033 - Setscrew-Hexagon Socket, Flat Point, Brass, Black Oxide, UNF-3a
- MS-51034 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, Cadmium or Zinc, NC-3a and UNC-3a (Superseded by ms-51973
- MS-51035 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, Cadium or Zinc, NF-3a and UNF-3a (Superseded by ms-51974)
- MS-51036 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, Phosphate Coated, NC-3a and UNC-3a (Superseded by ms-51973)
- MS-51037 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, Phosphate, NF-3a and UNF-3a (Superseded by ms-51974)
- MS-51038 - Setscrew-Hexagon Socket, Cone Point, Corrosion-Resisting Steel, Passivated, UNC-3a and UNF-3a, Plain and Self-Locking (Superseded by NASM-51038)
- MS-51039 - Setscrew, Hexagon Socket, Cone Point, Corrosion Resisting (Chromium) Steel, Passivated, NF-3a (Use ms-51038)
- MS-51040 - Setscrew-Hexagon Socket, Cone Point, Brass, Black Oxide, UNF-3a
- MS-51041 - Setscrew, Hexagon Socket, Half-Dog Point, Alloy Steel Cadmium or Zinc, NC-3A and UNC-3A
- MS-51042 - Setscrew, Hexagon Socket, Half-Dog Poin, Alloy Steel, Cadmium or Zinc, NF-3a and UNF-3a (Superseded by ms-51976)
- MS-51043 - Setscrew, Hexagon Socket, Half-Dog Point, Alloy Steel, Phosphate Coated, NC-3a and UNC-3a (Superseded by ms-51977)
- MS-51044 - Setscrew, Hexagon Socket, Half-Dog Point, Alloy Steel, Phosphate Coated, NF-3a and UNF-3a (Superseded by ms-51976)
- MS-51045 - Setscrew-Hexagon Socket, Half-Dog Point, Corrosion-Resisting Steel, Passivated, UNC-3a (Superseded by NASM-51045)
- MS-51046 - Setscrew, Hexogon Socket, Half-Dog Point, Corrosion Resisting (Chromium) Steel, Passivated, NC-3a and UNC-3a (Use ms-51045)
- MS-51047 - Setscrew-Hexagon Socket, Half-Dog Point, Corrosion-Resisting Steel, Passivated, UNF-3a (Superseded by NASM-51047)
- MS-51048 - Setscrew, Hexagon Socket, Half-Dog Point, Corrosion Resisting (Chromium) Steel, Passivated, NF-3a and UNF-3a (Superseded by ms-51047)
- MS-51049 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel, Cadmium or Zinc, NC-3a and UNC-3a (Superseded by ms-51981)
- MS-51050 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel, Cadmium or Zinc, NF-3a and UNF-3a (Superseded by ms-51982)
- MS-51051 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel, Phosphate Coated, NC-3a and UNC-3a (Superseded by ms-51981)
- MS-51052 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel, Phosphate Coated, NF-3 and UNF-3a (Superseded by ms-51982)
- MS-51053 - Setscrew, Fluted Socket, Alloy Steel, Cadmium Plated, NC-3A
- MS-51054 - Setscrew, Square Head, Cup Point, Carbon Steel, Cadmium or Steel, UNC-2a (Superseded by ms-51955)
- MS-51055 - Setscrew, Slotted, Cup Point, Carbon Steel, Cadmium or Zinc, NC-2A
- MS-51056 - Setscrew, Slotted, Flat Point, Corrosion Resisting (Chrome-Nickel) Steel, Passivated, NF-2A
- MS-51057 - Setscrew, Slotted, Flat Point, Corrosion Resisting (Chronium) Steel, Passivated, NF-2a (Use ms-51031)
- MS-51058 - Setscrew, Slotted, Flat Point, Brass, Uncoated, NF-2a
- MS-51059 - Setscrew, Slotted, Cone Point, Corrosion Resisting (Chrome-Nickel) Steel, Passivated, NF-2a
- MS-51060 - Setscrew, Slotted, Cone Point, Corrosion Resisting (Chromium) Steel, Passivated, NF-2a
- MS-51061 - Setscrew, Slotted, Cone Point, Brass, Uncoated, NF-2a
- MS-51093 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt, Head Drilled for Locking Wire, Steel, Grade 5, Cadmium Plated, UNC-2a (Superseded by ms-51095)
- MS-51094 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5, Cadmium Plated, UNF-2a (Superseded by ms-51096)
- MS-51095 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5, Cadmium Plated, UNC-2a, Plain and Self-Locking (Superseded by NASM-51095)
- MS-51096 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5, Cadmium Plated, UNF-2a, Plain and Self-Locking (Superseded by NASM-51096)
- MS-51097 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Alloy Steel, Grade 8, Cadmium Plated, UNC-2a (Superseded by ms-18154)
- MS-51098 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Alloy Steel, Grade 8, Cadmium Plated, UNF-2a (Superseded by ms-18153)
- MS-51099 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Corrosion-Resisting, Passivated, UNC-2a
- MS-51100 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Corrosion-Resisting, Passivated, UNF-2a
- MS-51101 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Aluminum Alloy, Anodized, UNC-2a
- MS-51102 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Aluminum Alloy, Anodized, UNF-2a
- MS-51103 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Grade 5, Cadmium Plated, UNC-2a (Superseded by ms-51105)
- MS-51104 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Grade 5, Cadmium Plated, UNF-2a (Supersededed by ms-51106)
- MS-51105 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Grade 5, Cadmium Plated, UNC-2a (Superseded by NASM-51105)
- MS-51106 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Grade 5, Cadmium Plated, UNF-2a (Superseded by NASM-51106)
- MS-51107 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Alloy Steel, Grade 8, Phosphate Coated, UNC-2a
- MS-51108 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Alloy Steel, Grade 8, Phosphate Coated, UNF-2a
- MS-51109 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Corrosion Resisting, Passivated, UNC-2a (Superseded by NASM-51109)
- MS-51110 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Corrosion-Resisting, Passivated, UNF-2a (Superseded by NASM-51110)
- MS-51111 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Aluminum Alloy, Anodized, UNC-2a
- MS-51112 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Aluminum Alloy, Anodized, UNF-2a
- MS-51475 - Screw, Machine, Boom Support Assembly
- MS-51476 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, UNC-3a
- MS-51477 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, UNF-3a
- MS-51478 - Screw, Cap, Hexagon (Finished Hexagon Bolt), Head Drilled for Locking Wire Alloy Steel, Grade 8, UNF-2A
- MS-51479 - Screw, Machine, 82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, UNF-2a
- MS-51480 - Screw, Cap, Socket Head, Alloy Steel, UNF-3a
- MS-51481 - Screw, Machine, 82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, UNC-2a
- MS-51482 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, UNC-3a
- MS-51483 - Screw, Machine, Drilled Fillister Head, Slotted, Carbon Steel, UNC-2a
- MS-51484 - Screw, Cap, Socket Head, Alloy Steel, UNC-3a
- MS-51485 - Screw, Tapping, Thread Cutting, Types D, F, g or T Pan Head, Cross-Recessed, Carbon Steel
- MS-51486 - Screw, Tapping, Thread Forming, Type Ab, Pan Head, Cross-Recessed
- MS-51487 - Setscrew, Square Head, Cup Point, Carbon Steel, UNC-2A
- MS-51488 - Screw, Cap Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Grade 8
- MS-51489 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel
- MS-51490 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Grade 5, UNF-2a
- MS-51491 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Grade 5 UNC-2a
- MS-51492 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel, UNC-2A
- MS-51493 - Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel UNF-2a
- MS-51494 - Screw, Externally Relieved Body, Flat Countersunk Head, 100 Degree, Cross-Recessed
- MS-51495 - Screw, Externally Relieved Body, Fillister Head
- MS-51575 - Screw, Shoulder, Slotted-Head, CORRISION-Resistant Steel (Superseded by NASM-51575)
- MS-51576 - Screw, Shoulder, Socket-Head, Hexagon, Corrosion-Resistant Steel (Superseded by NASM-51576)
- MS-51849 - Screw, Machine - Steel, Hexagon Head, Slotted, UNF-2a and UNC-2a
- MS-51850 - Screw, Tapping - Thread Forming, Type Ab, Hexagon Head, Slotted (Superseded by NASM-51850)
- MS-51851 - Screw, Tapping-Thread Cutting, Type D, Hexagon Head, Slotted (Superseded by NASM-51851)
- MS-51861 - Screw, Tapping-Thread Forming, Type Ab, Pan Head, Cross-Recessed (Superseded by NASM-51861)
- MS-51862 - Screw, Tapping - Thread Forming, Type Ab, Flat 82 Degree Countersunk Head, Cross-Recessed (Superseded by NASM-51862)
- MS-51863 - Screw, Tapping High Performance, Thread Rolling, Types Sf, Sw and Tt, Pan Head, Cross Recessed (Superseded by NASM-51863)
- MS-51869 - Screw, Tapping High Performance, Thread Rolling, Types Sf, Sw and Tt, Hexagon Washer Head
- MS-51870 - Screw, Tapping-High Performance, Thread Rolling, Types Sf, Sw and Tt, Flat Countersunk Head, Cross- Recessed (Superseded by NASM-51870)
- MS-51871 - Screw, Tapping High Performance, Zone Hardened Structural Thread Rolling, Hexagon Washer
- MS-51896 - Screw, Externally Relieved Body, Panhead, Cross-Recessed, Corrosion-Resisting Steel, UNC-2a (Superseded by NASM-51896)
- MS-51955 - Setscrew-Square Head, Cup Point, Carbon Steel
- MS-51957 - Screw, Machine, Pan Head, Cross-Recessed, Corrosion Resistant Steel, UNC-2A
- MS-51958 - Screw, Machine Pan-Head, Cross-Recessed, Corrosion Resisting Steel, UNF-2a (Superseded by NASM-51958)
- MS-51959 - Screw, Machine-Flat Countersunk Head, 82 Deg., Cross-Recessed, Corrosion - Resistant Steel, UNC-2a (Superseded by NASM-51959)
- MS-51960 - Screw, Machine-Flat Countersunk Head, 82 Degree, Cross-Recessed, Corrosion Resistant Steel, UNF-2A
- MS-51963 - Setscrew-Hexagon Socket, Cup Point, Alloy Steel, Cadmium Plated, UNC-3a, Plain and Self-Locking (Superseded by NASM-51963)
- MS-51964 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Cadmium Plated, UNF-3a, Plain and Self-Locking (Superseded by NASM-51964)
- MS-51965 - Setscrew-Hexagon Socket, Flat Point, Alloy Steel, Cadmium Plated, UNC-3a, Plain and Self-Locking (Superseded by NASM-51965)
- MS-51966 - Setscrew - Hexagon Socket, Flat Point, Alloy Steel, Cadmium Plated, UNF-3a, Plain and Self-Locking (Superseded by NASM-51955)
- MS-51973 - Setscrew - Hexagon Socket, Cone Point, Alloy Steel, Cadmium Plated, UNC-3a, Plain and Self-Locking (Superseded by NASM-51973)
- MS-51974 - Setscrew-Hexagon Socket, Cone Point, Alloy Steel, Cadmium Plated, UNF-3a, Plain and Self-Locking (Superseded by NASM-51974)
- MS-51975 - Screw, Shoulder - Socket Head, Hexagon, Alloy Steel, Cadmium Plated, UNC-3a (Superseded by NASM-51975)
- MS-51976 - Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3a (Superseded by NASM-51976)
- MS-51977 - Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3a (Superseded by NASM-51977)
- MS-51981 - Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNC-3a (Superseded by NASM-51981)
- MS-51982 - Setscrew-Hexagon Socket, Oval Point, Alloy, Cadmium Plated, UNC-3a (Superseded by NASM-51982)
- MS-9001 - Cross-Recess, Blunt Bottom Standard for Countersunk 82 Degrees Head Machine Screws.
- MS-9002 - Cross-Recess, Blunt Bottom Standard for Countersunk 100 Degrees Head Machine Screws.
- MS-9003 - Cross-Recess, Blunt Bottom Standard for Pan Head Machine Screws.
- MS-9005 - Cross-Recess, Blunt Bottom Standard for Round Head Wood Screws.
- MS-9006 - Recesses-Cross, Low Torque Drive, Dimensions and Gage Dimensions for (Superseded by NASM-9006)
- MS-9033 - Bolt-Machine, 12 Point Head Heat Resistant, .190 (No.10)-32, AMS 5735
- MS-9034 - Bolt-Machine, 12 Point Head, Heat Resistant Steel 250-28NS
- MS-9035 - Bolt-Machine, 12 Point Head, Heat Resistant Steel, .3125-24 NS
- MS-9036 - Bolt-Machine, 12 Point Head, Heat Resistant Steel, .375-24 NS
- MS-9037 - Bolt-Machine, 12 Point Head Heat Resistant Steel .4375-20 Ns (No Superseding Document)
- MS-9038 - Bolt-Machine, 12 Point Head Heat Resistant Steel, .500-20 Ns (No Superseding Document)
- MS-9039 - Bolt-Machine, 12 Point Head Heat Resistant Steel, .5625-18 Ns (No Superseding Document)
- MS-90725 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNC-2a (Superseded by NASM-90725)
- MS-90726 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNF-2a (Superseded by NASM-90726)
- MS-90727 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Grade 8, Zinc Coated UNF-2a, Plain and Self-Locking (Superseded by ANSI-B18.2.1)
- MS-90728 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Alloy Steel, Grade 8, Zinc Coated Plain and Self-Locking, UNC-2a (Cancelled, 1991, Use ANSI-B18.2.1)
- MS-9122 - Screw, Machine, Slotted Hex Head, .190-32
- MS-9123 - Screw, Machine, Slotted Hex Head, 250-28
- MS-9177 - Screw, Machine-Cres Double Hexagon, Extended Washer Head, .138-40
- MS-9178 - Screw, Machine - Cres, Double Hexagon Extended Washer Head,.164-36
- MS-9183 - Screw, Machine, Steel, Drilled 12 Point Head, .138 (No. 6)-40, Cadmium Plate (Asg) (No Superseding Document)
- MS-9184 - Bolt-Machine, Steel, Drilled 12 Point Head, .164 (No. 8)-36, Cadmium Plate (No Superseding Document)
- MS-9185 - Screw, Machine, Steel, 12 Point Head, .138 (No. 6)-40, Cadmium Plate (No Superseding Document)
- MS-9187 - Screw, Machine-Cres, Double Hexagon Extended Washer Head, Drilled, .138-40 (No Superseding Document)
- MS-9188 - Screw, Machine-Cres, Double Hexagon Extended Washer Head, Drilled, .164-36 (No Superseding Document)
- MS-9189 - Screw-Machine, Steel, 12 Point Head, .138 (No. 6)-40, Black Oxide (No Superseding Document)
- MS-9190 - Bolt-Machine, Steel, 12 Point Head, .164 (No. 8)-36, Black Oxide (No Superseding Document)
- MS-9191 - Bolt-Machine, Steel, Drilled 12 Point Head, .138 (No. 6)-40, Black Oxide (No Superseding Document)
- MS-9192 - Bolt-Machine, Steel, Drilled 12 Point Head, .164(No.8)-36 Cadmium Plate
- MS-9206 - Screw, Machine-Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .138-40 UNJF-3a
- MS-9207 - Screw, Machine-Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, .164-36 UNJF-3a (Superseded by SAE as-9207)
- MS-9215 - Screw, Machine-Steel Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .138 40 Unjf 3a
- MS-9216 - Screw, Machine-Steel AMS 6304, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, .164-36 UNJF-3a (Superseded by SAE as-9216)
- MS-9224 - Bolt- Machine, 12 Point Head, Heat Resistant, .5625-18 AMS 5735 (Asg)
- MS-9281 - Screw, Machine-Steel AMS 6322, Black Oxide, Hexagon Head, .138-40 UNJF-3a
- MS-9282 - Screw, Machine Steel AMS 6322, Black Oxide, Hexagon Head, .164-36 UNJF-3a
- MS-9292 - Screw, Machine-Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .138-40 UNJF-3a (Superseded by SAE as-9292)
- MS-9293 - Screw, Machine Steel AMS 6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3a
- MS-9316 - Screw, Machine - Steel, Slotted Hexagon Head, .190-32, NI-Cad Plate (Superseded by SAE as-9316)
- MS-9317 - Screw, Machine-Steel, Slotted Hexagon Head, .250-28 NI-Cad Plate (Superseded by SAE as-9317)
- MS-9438 - Screw, Machine-Steel, AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .138-40 UNJF-3a
- MS-9439 - Screw, Machine-Steel, AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .164-36 UNJF-3a
- MS-9449 - Screw Machine Hexagon Head Steel 138-40 UNJF-3a (Superseded by SAE as-9449)
- MS-9450 - Screw Machine Hexagon Head Steel 164-36 UNJF-3a (Superseded by SAE as-9450)
- MS-9487 - Screw, Machine - Hexagon Head, Full Shank, AMS 5731, 136-40 UNJF-3a
- MS-9488 - Screw, Machine - Hexagon Head, Full Shank, AMS 5731, .164-36 UNJF-3a
- MS-9498 - Screw, Machine - Hexagon Head, Drilled, 1 Hold, Full Shank, AMS 5731, .138-40 UNJF-3a (No Superseding Document)
- MS-9499 - Screw, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5731, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9516 - Screw, Machine Steel AMS 6322, Cadmium Plate, Hexagon Head, .138-40 UNJF-3a (Superseded by SAE as-9516)
- MS-9517 - Screw, Machine Steel AMS 6322, Cadmium Plate, Hexagon Head, .164-36 UNJF-3a (Superseded by SAE as-9517)
- MS-9527 - Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .138-40 UNJF-3a (Superseded by SAE as-9527)
- MS-9528 - Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3a (Superseded by SAE as-9528)
- MS-9554 - Screw, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .138-40 UNJF-3a (Superseded by SAE as-9554)
- MS-9555 - Screw, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .164-36 UNJF-3a (Superseded by SAE as-9555)
- MS-9563 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, AMS 5731, .138-40 UNJF-3a (No Superseding Document)
- MS-9564 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5731, .164-36 UNJF-3a (Superseded by SAE as-9564)
- MS-9572 - Screw, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .138-40 UNJF-3a (Superseded by SAE as-9572)
- MS-9573 - Screw, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .164-36 UNJF-3a (Superseded by SAE as-9573)
- MS-9622 - Screw Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9623 - Screw, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Titanium AMS 4967, .164-36 UNJF-3a (No Superseding Document)
- MS-9631 - Screw, Machine - Hexagon Head, Pd Shank, Titanium AMS 4967, .138-40 UNJF-3a (Superseded by SAE as-9631)
- MS-9632 - Screw, Machine - Hexagon Head, Pd Shank, Titanium AMS 4967, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9640 - Screw, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, .138-40 UNJF-3a (No Superseding Document)
- MS-9641 - Screw, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Titanium AMS 4967, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9649 - Screw, Machine - Hexagon Head, Full Shank, Titanium AMS 4967, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9650 - Screw, Machine - Hexagon Head, Full Shank, Titanium AMS 4967, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9694 - Screw, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .138-40 UNJF-3a (No Superseding Document)
- MS-9695 - Screw, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .164-36 UNJF-3a (No Superseding Document)
- MS-9703 - Screw, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .138-40 UNJF-3a (No Superseding Document)
- MS-9704 - Screw, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .164-36 UNJF-3a
- MS-9712 - Screw, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel,.138-40 UNJF-3A (SUPERSEDED BY SAE AS-9712)
- MS-9713 - Screw, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .164-36 UNJF-3a (No Superseding Document)
- MS-9730 - Screw, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, .138-40 UNJF-3a (No Superseding Document)
- MS-9731 - Screw, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cres AMS 5643, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9739 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9740 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres AMS 5643, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9748 - Screw, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9749 - Screw, Machine - Double Hexagon Extended Washer Head, Pd Shank, Titanium AMS 4967, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9757 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9758 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium AMS 4967, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9781 - Screw, Machine-Hexagon Head, Full Shank, AMS 5643, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9782 - Screw, Machine-Hexagon Head, Full Shank, AMS 5643, 0.164-38 UNJF-3a (No Superseding Document)
- MS-9792 - Screw, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9793 - Screw, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9803 - Screw, Machine-Hexagon Head, Pd Shank, AMS 5643, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9804 - Screw, Machine - Hexagon Head, Pd Shank, AMS 5643, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9814 - Screw, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9815 - Screw, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, AMS 5643, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9883 - Screw, Machine - Double Hexagon Extended Washer Head, AMS 5616, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9884 - Screw, Machine - Double Hexagon Extended Washer Head, AMS 5616, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9892 - Screw, Machine-Double Hexagon Extended Washer Head, Drilled, AMS 5616, .138-4 UNJF-3a (No Superseding Document)
- MS-9893 - Screw, Machine-Double Hexagon Extended Washer Head, Drilled, AMS 5616, .164-36 UNJF-3a (No Superseding Document)
- MS-9912 - Screw, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9913 - Screw, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel AMS 6322, Cadmium Plated, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9921 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS 6322, Cadmium Plated, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9922 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Steel AMS 6322, Cadmium Plated, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9930 - Screw, Machine-Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, 0.138-40 UNJF-3a (No Superseding Document)
- MS-9931 - Screw, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, 0.164-36 UNJF-3a (No Superseding Document)
- MS-9939 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, 0.138-40 UNJF-2a (No Superseding Document)
- MS-9940 - Screw, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, 0.164-36 UNJF-3a (No Superseding Document)
- NA-0035 - Screw, Close Tolerance, Pan Head, Offset Cruciform Recess, Alloy Steel, 1100 Mpa, Metric
- NA-0038 - SCREW, CLOSE TOLERANCE, 100 Degrees FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC
- NA-0039 - Screw, Close Tolerance, 100 Degrees Flush Head, Offset Cruciform Recess, Titanium Alloy, 660 Mpa, Shear, Metric
- NA-0042 - SCREW, CLOSE TOLERANCE, 100 Degrees FLUSH HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC
- NA-0046 - SCREW, CLOSE TOLERANCE, PAN HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 1100 MPa, METRIC
- NA-0047 - Screw, Close Tolerance, Pan Head, Offset Cruciform Recess, Titanium Alloy, 1100 Mpa, Metric
- NA-0060 - SCREW, CLOSE TOLERANCE, 100 Degrees FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 750 MPa SHEAR, METRIC
- NA-0060-80/0 - Screw, Close Tolerance, 100 Deg. Flush Head, TORQ-Set, Alloysteel, 750 Mpa Shear, Metr
- NA-0067 - Screw, Dual Wrenching, Hex Head/Offset Cruciform, a286 Cres, Full Thread, 1100 Mpa, Me
- NA-0068 - Screw, Machine, Pan Head, Offset Cruciform, a286 Cres, Full Thread, 1100 Mpa, Metric
- NA-0069 - Screws, Cap, Hexagon Socket Head, Full Thread A-286, 1100 Mpa, Metric
- NA-0070 - Screw, Machine, 100 Degrees Flush Head, Offset Cruciform Recess, Full Thread, a286 Cres, 1100 Mpa, Metric
- NA-0070-79/0 - Screw, 100 Deg. Flush Head, TORQ-Set, A-286 Cres, Full Thread, 1100 Mpa, Metric - Dec
- NA-0078 - Nut, Self-Locking, Plate, Fixed, One Lug, Cres, Reduced Rivet Spacing, Low Height, Cbore, 900 Mpa, Metric, 235 Degrees C and 425 Degrees C
- NA-0089 - SCREW, PAN HEAD, OFFSET CRUCIFORM RECESS, FULL THREAD, ALLOY STEEL, 1100 MPa, METRIC
- NA-0090 - Screw, Pan Head, Offset Cruciform Recess, Full Thread, Titanium Alloy, 1100 Mpa, Metric
- NA-0091 - Screw, 100 Degrees Flush Head, Offset Cruciform Recess, Full Thread, Alloy Steel, 1100 Mpa Ftu, Metric
- NA-0092 - Screw, 100 Degree Flush Head, Offset Cruciform Recess, Full Thread, Titanium Alloy, 1100 Mpa Ftu, Metric
- NA-0113 - Screw, Hex Head, Offset Cruciform Recess, Titanium, Full Thread, 1100 Mpa, Metric
- NA-0114 - Screw, Hex Head, Offset Cruciform, Alloy Steel, Full Thread, 1100 Mpa, Metric
- NA-0123 - Screw, Close Tolerance, 100 Degrees Reduced Crown Head, Offset Cruciform Recess, Alloy Steel, 660 Mpa Shear, Metric
- NA-0124 - SCREW, CLOSE TOLERANCE, 100-¦ REDUCED CROWN HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC
- NA-0125 - Screw, Close Tolerance, 100 Degrees Reduced Crown Head, Offset Cruciform Recess, Titanium, 660 Mpa Shear, Metric
- NA-0127 - Screw, Captive, 100 Degrees Flush Head, Offset Cruciform Recess, Alloy Steel, 660 Mpa Shear, Metric
- NA-0128 - Screw, Captive, 100 Degrees Flush Head, Offset Cruciform Recess, a286 Cres, 660 Mpa Shear, Metric
- NA-0129 - Screw, Captive, 100 Degrees Flush Head, Offset Cruciform Recess, Titanium, 660 Mpa Shear, Metric
- NA-0130 - Screw, Captive, Pan Head, Offset Cruciform Recess, Alloy Steel, 660 Mpa Shear, Metric
- NA-0131 - Screw, Captive, Pan Head, Offset Cruciform Recess, a286 Cres, 660 Mpa Shear, Metric
- NA-0132 - Screw, Captive, Pan Head, Offset Cruciform Recess, Titanium, 660 Mpa Shear, Metric
- NA-0159 - Screw, Fairing Washer, Assembly, Alloy Steel, Offset Cruciform Recess, Full Thread, 1100 Mpa Tensile, Metric
- NA-0160 - Screw, Fairing Washer, Assembly, 6al-4V Titanium Alloy, Offset Cruciform Recess, Full Thread, 1100 Mpa Tensile, Metric
- NA-0162 - Setscrew, Hexagon Socket, Cup Point, a286 Cres, Metric
- NAM-51474 - Screw, Cap, Hex Head, Fully Threaded, Metric
- NAS-1081 - Setscrew, Self-Locking
- NAS-1096 - Screw, Hex Head, Recessed, Full Thread, Alloy Steel, 125 Ksi Ftu
- NAS-1100 - Screw, Pan Head, Full Thread, Offset Cruciform Recess, 160 Ksi Ftu
- NAS-1101 - Screw, Machine, Flat Fillister Head, Full Thread, Offset Cruciform
- NAS-1102 - Screw, Machine, Flat 100 Degrees Head, Full Thread, Offset Cruciform
- NAS-1121 THRU 1128 - Screw, Machine, Flat Fillister Head, Close Tolerance, Short Thread Offset Cruciform, 160 Ksi Ftu
- NAS-1131 THRU 1138 - Screw, Machine, Pan Head, Close Tolerance, Short Thread, Offset Cruciform
- NAS-1141 THRU 1148 - Screw, Machine, Pan Head, Modified, Close Tolerance, Short Thread, Offset Cruciform
- NAS-1151 THRU 1158 - Screw, Tension, Machine, Flat 100 Degrees Flush Head, Close Tolerance, Short Thread, Offset Cruciform and Offset Cruciform- Ribbed, 160 Ksi Ftu
- NAS-1161 THRU 1168 - Screw, Self-Locking, Flat 100 Degrees Head, Shear, Offset Cruciform
- NAS-1171 THRU 1178 - Screw, Self-Locking, Pan Head, Shear, Offset Cruciform
- NAS-1181 THRU 1188 - Screw, Self-Locking, Flat Fillister Head, Close Tolerance, Offset Cruciform
- NAS-1189 - Screw, Self-Locking, Flat 100 Deg. Head, Cruciform and Offset Cruciform Recess, Full Thread
- NAS-1190 - Screw, Self-Locking, Pan Head, Full Thread, Cruciform and Offset Cruciform Recess
- NAS-1191 - Screw, Self-Locking, Flat Fillister Head, Full Thread
- NAS-1216 - Screw, Pan Head, Slotted Dovetail Recess, Full Thread, Self-Locking Optional
- NAS-1218 - Bolt, Pan Head, Self-Locking Optional
- NAS-1219 - Screw, 100 Degrees Flush Head, Dovetail Slot Recess, Full Thread, Self-Locking Optional
- NAS-1221 - Bolt, 100 Degrees Flush Head, Self-Locking Optional
- NAS-1298 - Screw, Brazier Head, Shoulder
- NAS-1299 - Screw, 100 Degrees Flat Head, Shoulder
- NAS-1300 - Thumbscrew
- NAS-1301 - Screw, Pan Head, Assembled Washers
- NAS-1351 - Screw, Cap, Socket Head, Undrilled and Drilled, Plain and Self-Locking, Alloy Steel, Corrosion-Resistant Steel and Heat-Resistant Steel, UNRF-3a
- NAS-1352 - Screw, Cap, Socket Head, Undrilled and Drilled, Plain and Self-Locking, Alloy Steel, Corrosion-Resistant Steel and Heat-Resistant Steel, UNRC-3a and UNRC-2a
- NAS-1402 - Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000Psi +See NAS-1402 Thru 140
- NAS-1402 THRU 1406 - Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000Psi Tensile
- NAS-1620 THRU 1628 - Screw, Machine, Flat 100 Deg Head, Short Thread, Offset Cruciform
- NAS-1630 THRU 1634 - Screw, Machine, Pan Head, Short Thread, Offset Cruciform
- NAS-1635 - Screw, Machine, Pan Head, Cruciform Recess, Full Thread, Non-Locking and Self-Locking
- NAS-1741 - Screw, Self-Locking - Flat 100 Deg Head, Full Thread, Patchtype
- NAS-1742 - Screw, Self-Locking - Pan Head, Full Thread, Patch Type
- NAS-1743 - Screw, Self-Locking, Flat Fillister Head, Full Thread, Patch Type
- NAS-1801 - Screw, Hex Head, Cruciform Recess, Full Thread, Alloy Steel, 160 Ksi Ftu
- NAS-1802 - Screw, Hex Head, Cruciform Recess, Full Thread, a286 Cres, 160 Ksi Ftu
- NAS-204 - Screws - 100 Deg. Flat Head, Phillips Recess, Aluminum Alloy, Bronze & Alloy Steel 8-3
- NAS-205 - Screws - 100 Deg. Flat Head, Phillips Recess, Aluminum Alloy, Bronze & Alloy Steel, 10
- NAS-206 - Screws-100 Deg. Flat Head, Phillips Recess, Aluminum Alloy,Bronze & Alloy Steel, 1.4-
- NAS-207 - Screws-100 Deg. Flat Head, Phillips Recess, Aluminum Alloy,Bronze & Alloy Steel, 5/16
- NAS-208 - Screws-100 Deg. Flat Head, Phillips Recess, Aluminum Alloy,Bronze & Alloy Steel, 3/8-
- NAS-209 - Screws-100 Deg. Flat Head, Phillips Recess, Aluminum Alloy,Bronze & Alloy Steel, 7/16
- NAS-210 - Screws-100 Deg. Flat Head, Phillips Recess, Aluminum Alloy,Bronze & Alloy Steel, 1/2-
- NAS-211 - Screws-100 Deg. Flat Head, Phillips Recess, Aluminum Alloy,Bronze & Alloy Steel, 9/16
- NAS-212 - Screws-100 Deg. Flat Head, Frearson Recess, Aluminum Alloy,Bronze & Alloy Steel, 8-32
- NAS-213 - Screws - 100 Deg. Flat Head, Frearson Recess, Aluminum Alloy, Bronze & Alloy Steel, 10
- NAS-214 - Screws - 100 Deg. Flat Head, Frearson Recess, Aluminum Alloy, Bronze & Alloy Steel, 1/
- NAS-215 - Screws - 100 Deg Flat Head, Frearson Recess, Aluminum Alloy,Bronze & Alloy Steel, 5/16
- NAS-216 - Screws - 100 Deg Flat Head, Frearson Recess, Aluminum Alloy,Bronze & Alloy Steel, 3/8-
- NAS-217 - Screws - 100 Deg Flat Head, Frearson Recess, Aluminum Alloy,Bronze & Alloy Steel, 7/16
- NAS-218 - Screws - 100 Deg Flat Head, Frearson Recess, Aluminum Alloy,Bronze & Alloy Steel. 1/2-
- NAS-219 - Screws - 100 Deg Flat Head, Frearson Recess, Aluminum Alloy,Bronze & Alloy Steel, 9/16
- NAS-333 THRU 340 - Screw, Shear, 100 Degrees Standard Flush Head, Close Tolerance, 95 Ksi Fsu
- NAS-384 - Screw-100 Deg. Oval Recessed Head Sheet Metal
- NAS-387 - Screw, 100 Degrees Oval Recessed Head, Machine (Coarse and Fine Thread)
- NAS-388 - Screw, 82 Degrees Oval Recessed Head, Machine, Coarse and Fine Thread
- NAS-514 - Screw, Machine, 100 Degrees, Flat Head, Full Threaded, Alloy Steel
- NAS-517 - Screw, Shear, 100 Degree Flush Head, Alloy Steel, Cross Recess, Close Tolerance, 95 Ksi Fsu
- NAS-5300 THRU 5306 - Screw, Machine-Flat Fillister Head, Full Thread, TRI-Slot Recess, Alloy Steel, Self-Lo
- NAS-5400 THRU 5406 - Screw, Machine-Flat Fillister Head, Full Thread, TRI-Slot Recess, a286 Cres, Self-Lock
- NAS-5500 THRU 5506 - Screw, Machine-Flat Fillister Head, Full Thread, TRI-Slot Recess, Titanium Alloy 6al-4
- NAS-560 - Screw-Machine, Non-Magnetic High Temperature , Structural, 100 Deg. Flush Head
- NAS-5600 THRU 5606 - Screw, 100 Deg Head, TRI-Slot Recess, Alloy Steel, Full Thread, Self-Locking & Nonlock
- NAS-5700 THRU 5706 - Screw, 100 Deg Head, TRI-Slot Recess, a286 Cres, Full Thread, Self-Locking & Nonlockin
- NAS-5800 THRU 5806 - Screw, 100 Deg Head, TRI-Slot Recess, 6al-4V Titanium Alloy,Full Thread, Self-Locking
- NAS-583 THRU 590 - Screw, Shear, 100 Degrees Flush Head, Alloy Steel, 95 Ksi Fsu
- NAS-600 THRU 606 - Screw, Machine, Pan Head, Cruciform Recess, Full Thread, Alloy Steel
- NAS-623 - Screw, Shear, Pan Head, Alloy Steel, Cruciform Recess, Short Thread, 95 Ksi Fsu
- NAS-6303 THRU 6320 - BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, A286 CRES, SHORT THREAD, REDUCED MAJOR THREAD DIA., SELF-LOCKING AND NONLOCKING, 160 KSI Ftu
- NAS-6403 THRU 6420 - Bolt, Tension, Hex Head, Close Tolerance, 6al-4V Titanium Alloy, Short Thread, Reduced Major Thread Diameter, Self-Locking and Nonlocking, 160 Ksi Ftu
- NAS-662 - Screw, Machine, Flat 100 Degree Head, Plain and Self-Locking
- NAS-663 THRU 668 - Bolt, 100 Degree Flush Head 'Hi-Torque' Recess, Titanium Alloy (Long Thread)
- NAS-720 - Screw, Pan Head, Assembled Washers-Electrical Terminal Attachment (Preferred)
- NAS-721 - Screw, Miniature, Fillister Head
- NAS-722 - Screw, Miniature, Pan Head
- NAS-723 - Screw, Miniature, 100 Degrees Flat Head
- NAS-724 - Screw, Miniature, Binding Head
- NAS-8000 THRU 8006 - Screw, Pan Head, Ribbed Cruciform Recess, Alloy Steel, Full Thread, Self-Locking and Nonlocking
- NAS-8100 THRU 8106 - Screw, Pan Head, Ribbed Cruciform Recess, a286 Cres, Full Thread, Self-Locking and Nonlocking
- NAS-8200 THRU 8206 - Screw, Pan Head, Ribbed Cruciform Recess, Titanium Alloy 6al-4V, Full Thread, Self-Locking and Nonlocking
- NAS-8302 THRU 8304 - Screw, Machine, Washer Head, Full Thread, Cruciform Recess, Alloy Steel
- NAS-8402 THRU 8404 - SCREW, MACHINE, WASHER HEAD, FULL THREAD, RIBBED CRUCIFORM RECESS, A286 CRES
- NAS-9101 THRU 9106 - Screw, Hex Head, Offset Cruciform-Ribbed Recess, Full Thread, a286 Cres, 160,000 Psi Tensile
- NAS-9201 THRU 9206 - Screw, Hex Head, Offset Cruciform-Ribbed Recess, Full Thread, Titanium Alloy 6al-4V, 160,000 Psi Tensile
- NASM-15981 - Fasteners, Externally Threaded, Self-Locking Design and Usage Limitations For
- NASM-16218 - Screw, Machine, Flat Countersunk Head, Slotted, Copper-Silicon Alloy, UNC-2a, Nonmagnetic
- NASM-16995 - Screw, Cap, Socket Head-Hexagon, Corrosion Resistant Steel, UNC-3a
- NASM-16996 - Screw, Cap, Socket Head, Hexagon, Cres, UNF-3a
- NASM-18063 - Setscrew, Hexagon Socket, Cup Point, 250 Degrees F, Self Locking Element, Alloy Steel, Cadmium Plated
- NASM-18064 - Setscrew, Hexagon Socket, Cup Point, 250 Degrees F, Self-Locking Element, Cres, Passivated
- NASM-18067 - Setscrew, Hexagon Socket, Cone Point, 250 Degrees F, Self Locking Element, Alloy Steel, Cadmium Plated
- NASM-21090 - SCREW, SELF-LOCKING, 250 Degrees F, STEEL, 55 KSI Ftu, PAN HEAD, CROSS RECESSED
- NASM-21093 - SCREW, SELF-LOCKING, 250 Degrees F, STEEL, 55 KSI Ftu, 100 Degrees FLAT HEAD, CROSS RECESSED
- NASM-21207 - Screw, Tapping, 100 Degrees Flat Head, Spaced Thread
- NASM-21318 - Screw, Drive, Round Head, Type U, Steel, Carbon, Cadmium Plated
- NASM-21472 - Screw, Shoulder, Hexagon Socket-Head and Slotted-Head, General Specification For
- NASM-24625 - Screw, Tapping, Thread Cutting, Type Bf or BT, Pan Head, Cross-Recessed, Carbon Steel
- NASM-24627 - Screw, Tapping, Thread Cutting, Types D,F,g or T, Flat 82 Deg Countersunk Head, Cruciform Recess, Carbon Steel
- NASM-24628 - Screw, Tapping, Thread Cutting, Types D, F, g or T, Flat 82 Degrees Countersunk Head, Cruciform-Recessed, Cres
- NASM-24629 - Screw, Tapping, Thread Cutting, Types D, F, g, or T, Pan Head, Cruciform Recessed, Carbon Steel, Cadmium Plated
- NASM-24630 - Screw, Tapping, Thread Cutting, Types D, F, g or T, Pan Head, Cruciform Recessed, Cres
- NASM-24634 - Screw, Tapping, Thread Cutting, Types D, F, g and T, Approximate Hole Sizes For
- NASM-24667 - Screw, Cap, Socket Head, Flat Countersunk, 82 Degrees, Alloy Steel, UNC-3a
- NASM-24671 - Screw, Cap, Socket Head, Flat Countersunk, 82 Degrees, Corrosion-Resisting Steel, UNC-
- NASM-24673 - Screw, Cap, Socket Head, Hexagon, Drilled Corrosion-Resisting Steel (UNF-3a)
- NASM-24674 - Screw, Cap, Socket Head, Hexagon, Drilled, Corrosion Resistant Steel (UNC-3a)
- NASM-24677 - Screw, Cap, Socket Head, Hexagon, Drilled, Alloy Steel (UNC-3a)
- NASM-24678 - Screw, Cap, Socket Head, Hexagon, Drilled, Alloy Steel (UNF-3a)
- NASM-24693 - Screw, Machine, Flat Countersunk Head, 100 Degrees, Cross Recessed, UNC-2a and UNF-2a
- NASM-24694 - Screw, Machine, Flat Countersunk Head, 100 Degrees, Structural, Cross Recessed, UNC-3a and UNF-3a
- NASM-25087 - Screw, Externally Relieved Body
- NASM-27039 - Screw, Machine, Pan Head, Cruciform Recess
- NASM-27577 - Bbolt, Self-Retaining, Impedance Type, 95 Ksi Fsu, Flush Head, 450 -¦F
- NASM-3212 - Screw, Machine, Pan Head, Cross-Recessed, Self-Sealing, Integral Silicone O-Ring, Plain and Self-Locking
- NASM-3213 - Screw, Machine, Pan Head, Cross-Recessed, Self-Sealing, Integral Fluorosilicone O-Ring, Plain and Self-Locking
- NASM-33749 - Screw, Installation and Limitations for Usage of Thread Cutting and Thread Forming
- NASM-35190 - Screw, Machine, 82-¦ Flat Countersunk Head, Cruciform Recess, Carbon Steel, Cadmium Plated, Self-Locking and Non-Locking, UNC-2a
- NASM-35198 - Screw, Machine, Flat Countersunk Head, 82 Degrees, Cross-Recessed, Brass, Unc-2A
- NASM-35199 - Screw, Machine, 82 Degrees Flat Countersunk Head, Cross-Recessed, Brass, Black Chemical Finish, UNF-2a
- NASM-35202 - Screw, Machine, Flat Countersunk Head, 82 Degrees, Cross-Recessed, Aluminum Alloy, Anodic Coated, UNC-2a
- NASM-35203 - Screw, Machine, Flat Countersunk Head, 82 Degrees, Cruciform Recess, Aluminum Alloy, Anodic Coated, UNF-2a
- NASM-35206 - Screw, Machine, Pan Head, Cruciform Recess, Carbon Steel, UNC-2a
- NASM-35207 - Screw, Machine, Pan Head, Cruciform Recess, Carbon Steel, Cadmium Plated, UNF-2a (in./
- NASM-35214 - Screw, Machine, Pan Head, Cross-Recessed, Brass, UNC-2a
- NASM-35215 - Screw, Machine, Pan Head, Cruciform Recess, Brass, UNF-2a
- NASM-35273 - Screw, Machine, Drilled Fillister Head, Slotted, Brass, Black Chemical Finish, UNC-2a
- NASM-35274 - Screw, Machine, Drilled Fillister Head, Slotted, Brass, Black Chemical Finish, UNF-2a
- NASM-35275 - Screw, Machine-Drilled Fillister Head, Slotted, Corrosion-Resisting Steel, Passivated,
- NASM-35276 - Screw, Machine, Drilled, Fillister Head, Slotted, Corrosion Resistant Steel, Passivated, UNF-2a
- NASM-35307 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivat
- NASM-35308 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivat
- NASM-51021 - Setscrew, Hexagon Socket, Cup Point, Corrosion-Resisting Steel, Passivated, UNC-3a, Pl
- NASM-51023 - Setscrew, Hexagon Socket, Cup Point, Corrosion Resistant Steel, Passivated, UNF-3a, Plain and Self-Locking
- NASM-51029 - Setscrew, Hexagon Socket, Flat Point, Corrosion Resisting Steel, Passivated, UNC-3a, Plain and Self-Locking
- NASM-51031 - Setscrew, Hexagon Socket, Flat Point, Corrosion Resistant Steel, Passivated, UNF-3a, Plain and Self-Locking
- NASM-51038 - Setscrew, Hexagon Socket, Cone Point, Corrosion Resistant Steel, Passivated, UNC-3a and UNF-3a, Plain and Self-Locking
- NASM-51045 - Setscrew, Hexagon Socket, Half-Dog Point, Corrosion Resistant Steel, Passivated, UNC-3a
- NASM-51047 - Setscrew, Hexagon Socket, Half-Dog Point, Corrosion Resistant Steel, Passivated, UNF-3a
- NASM-51095 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5, Cadmium Plated, UNC-2a, Plain and Self-Locking
- NASM-51096 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5, Cadmium Plated, UNF-2a, Plain and Self-Locking
- NASM-51105 - Screw, Cap, Hexagon Head, Finished Hexagon Bolt, Shank Drilled for Cotter Pin, Steel, Grade 5, Cadmium Plated, UNC-2a
- NASM-51106 - Screw, Cap, Hexagon Head, Finished Hexagon Bolt, Shank Drilled for Cotter Pin, Steel, Grade 5, Cadmium Plated, UNF-2a
- NASM-51109 - Screw, Cap, Hexagon Head, Finished Hexagon Bolt, Shank Drilled for Cotter Pin, Cres, Passivated, UNC-2a
- NASM-51110 - Screw, Cap, Hexagon Head, Finished Hexagon Bolt, Shank Drilled Forcotter Pin, Cres, Passivated, UNF-2a
- NASM-51474 - Screw, Cap, Hex Head, Fully Threaded - Metric
- NASM-51575 - Screw, Shoulder, Slotted-Head, Cres
- NASM-51576 - Screw, Shoulder, Socket-Head, Hexagon, Corrosion-Resistant Steel
- NASM-51850 - Screw, Tapping, Thread Forming, Type Ab, Hexagon Head, Slotted
- NASM-51851 - Screw, Tapping, Thread Cutting, Type D, Hexagon Head, Slotted
- NASM-51861 - Screw, Tapping, Thread Forming, Type Ab, Pan Head, Cross-Recessed
- NASM-51862 - Screw, Tapping, Thread Forming, Type Ab, Flat 82 Degrees Countersunk Head, Cross-Reces
- NASM-51863 - Screw, Tapping, High Performance, Thread Rolling, Types Sf, Sw and Tt, Pan Head, Cross-Recessed
- NASM-51870 - Screw, Tapping, High Performance, Thread Rolling, Types Sf, Sw and Tt, Flat Countersunk Head, Cross Recessed
- NASM-51871 - Screw, Tapping, High Performance, Zone Hardened Structural Thread Rolling, Hexagon Washer Head
- NASM-51896 - Screw, Externally Relieved Body, Pan Head, Cruciform Recess, Cres, UNC-2a
- NASM-51958 - Screw, Machine Pan-head, Cross-recessed, Corrosion Resisting Steel, UNF-2A
- NASM-51959 - Screw, Machine, Flat Countersunk Head, 82 Degrees, Cruciform Recess, Corrosion-Resistant Steel, UNC-2a
- NASM-51963 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Cadmium Plated, UNC-3a, Plain and Self-Locking
- NASM-51964 - Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Cadmium Plated, UNF-3a, Plain and Self-Locking
- NASM-51965 - Setscrew, Hexagon Socket, Flat Point, Alloy Steel, Cadmium Plated, UNC-3a, Plain and Self-Locking
- NASM-51966 - Setscrew, Hexagon Socket, Flat Point, Alloy Steel, Cadmium Plated, UNF-3a, Plain and Self-Locking
- NASM-51973 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, Cadmium Plated, UNC-3a, Plain and Self-Locking
- NASM-51974 - Setscrew, Hexagon Socket, Cone Point, Alloy Steel, Cadmium Plated, UNF-3a, Plain and Self-Locking
- NASM-51975 - Screw, Shoulder, Socket Head, Hexagon Alloy Steel or Nickel-Copperalloy, UNC-3a
- NASM-51976 - Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3a
- NASM-51977 - Setscrew, Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3a
- NASM-51981 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNC-3a
- NASM-51982 - Setscrew, Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNF-3a
- NASM-525 - Screw, Washer Head
- NASM-565 - Setscrew, Hexagon and Fluted Socket, Headless
- NASM-7839 - Screws, Structural, Aircraft
- NASM-82496 - Screws, Machine, Self-Sealing, Integral O-Ring
- NASM-9006 - Recess-Cross, Low Torque Drive, Dimensions and Gage Dimensions For
- NASM-90725 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNC-2a
- NASM-90726 - Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNF-2a
- NBS-HDBK-28 - Screw-Thread Standards for Federal Services Part 1 (Superseded by Fed STD H28 Series)