FSC 5210: Measuring Tools, Craftsmen's
The following documents are a part of this series:- A-A-2293 - Gage, Wheel Alignment
- A-A-2348 - Indicator, Dial, Accessories, & Test Sets
- A-A-2525 - Chalk Line & Reel (Self-Chalking)
- A-A-2532 - Bevels, Sliding T
- A-A-2537 - Trammels
- A-A-2940 - Yardstick (Aluminum)
- A-A-3084 - Protractors, Mechanics, Bevel & Plain, Rectangular Head
- A-A-3085 - Protractors, Mechanics, Universal Bevel & Vernier Scale
- A-A-3179 - Squares, Machinists' Combination
- A-A-52009 - Surveyors Tool Pouch
- A-A-52010 - Clamp, Handle, Steel Tape
- A-A-52011 - Rules, Steel, Machinist's English & English-Metric Graduation
- A-A-52210 - Straightedge Steel (Machinists' & Toolmakers')
- A-A-52212 - Gage, Cylinder
- A-A-52216 - Tapes, Measuring: Tank Gauging Type, With Reel & Plumb Bob
- A-A-52576 - Surveyor`s Tool Pouch
- A-A-58051 - Optical Flats
- A-A-58070 - Gage, Indicator Bore
- A-A-59509 - Gage, Height, Electronic Indicating
- GG-C-108 - Caliper, Vernier, Laboratory +Cancelled, 1987, No S/S Document+
- GG-G-86 - Gage; Sheet & Plate, Twist Drill, Drill Rod, & Wire
- GGG-B-211 - Bevel, Sliding T, Universal and Ship Carpenters +Supersededby A-A-2532
- GGG-C-105 - Caliper, Micrometer, (Inside, Outside, Tube) & Gage, Depth Micrometer
- GGG-C-111 - Calipers & Gages, Vernier
- GGG-C-291 - Chalk Line and Reel (Self-Chalking) +Cancelled, 1987, Superseded ByA-A-2525
- GGG-C-95 - Caliper, General Purpose
- GGG-D-351 - Divider, Mechanics'
- GGG-G-15 - Gage Blocks & Accessories (Inch & Metric)
- GGG-G-17 - Gages, General Purpose
- GGG-G-31 - Gages, Marking & Mortising
- GGG-L-211 - Levels & Plumbs, & Levels
- GGG-M-145 - Matchometer, V-Belt (Fractional Horsepower) +Cancelled, 1978, No S/S Document+
- GGG-P-501 - Plumb Bob
- GGG-P-676 - Protractors, Mechanics, Bevel & Plain
- GGG-R-791 - Rules, Measuring
- GGG-R-810 - Rules, Measuring (Laboratory) Plastic & Wood +Cancelled, 1966, Superseded By NNN-R-770
- GGG-S-656 - Squares, Carpenters', Diemakers', & Machinists'
- GGG-T-106 - Tape, Measuring, (General Use)
- GGG-T-661 - Trammels and Trammel Points
- GGG-W-366 - Wire, Measuring, Gear, Thread, & General Purpose
- GGG-Y-35 - Yardstick (Wood & Aluminum)
- GG-O-635 - Optical Flats
- GG-T-116 - Tapes, Measuring (Steel, Surveyors')
- MIL-C-11260 - Clamp, Handle, Steel Tape (Superseded by A-A-52010)
- MIL-C-45023 - Caliper, Slide, Diameter and Cross Section, Tire-Measuring
- MIL-G-1248 - Gages, Carpenters and Machinists (Use GGG-17, GGG-G-31 or GGG-C-105)
- MIL-G-19629 - Gage, Wheel Alignment, Portable (Superseded by MIL-A-21962)
- MIL-G-21196 - Gage, Cylinder (Superseded by A-A-52212)
- MIL-G-26762 - Gage, Dial Bore (Superseded by A-A-58070)
- MIL-G-4412 - Gages, Thickness (Supersedes 50487)
- MIL-G-45823 - Gage, Brake Shoe and Drum
- MIL-G-45826 - Gage Set, Hydraulic Brake Cylinder
- MIL-G-45845 - Gage, Wheel Mounting, Railway
- MIL-G-45846 - Gage, Wheel Tread, Railway
- MIL-G-45856 - Gage, Track, Railway.
- MIL-G-83989 - Gage, Height, Electronic Indicating (No Superseding Document)
- MIL-I-18422 - Indicators, Dial and Accessories (Superseded by A-A-2348)
- MIL-L-45850 - Level, Railroad Track
- MIL-L-52046 - Level, Circular, 2.5 cm Diameter, Mounted in Cylinder (Superseded by GGG-L-211)
- MIL-M-16943 - Mandrel, Finger Ring
- MIL-O-26901 - Optical Flat and Set (Superseded by GG-O-635)
- MIL-R-11567 - Repair Kit, Steel Measuring Tape With Case (No Superseding Document)
- MIL-R-20380 - Rule, Steel, Machinist, Graduate in Inches, 24 Inch (Superseded by MIL-R-20387)
- MIL-R-20387 - Rules, Steel, Machinist's: English and English-Metric Graduations (Superseded by A-A-52011)
- MIL-R-45818 - Rod, End Measuring, Standard
- MIL-S-15769 - Straightedge (Steel, Machinists and Toolmakers) (Superseded by A-A-52210)
- MIL-S-45842 - Spot Board, Railway Track
- MIL-S-52420 - Sheath, Plumb Bob With Arrows Holder (Superseded by A-A-52009)
- MIL-T-16644 - Tape, Measuring, Tank Gaging Type, With Reel and Plumb Bob (Superseded by A-A-52216)
- MIL-T-19389 - Tape, Measuring (Use GGG-T-106)
- MIL-T-2602 - Tape, Measuring, Cloth
- MIL-T-2650 - Tape, Measuring, Woven, Mildew Resistent
- MIL-T-55371 - Tape, Radio Frequency Measuring (P/O Antenna Group an/GRA-50())
- MS-15165 - Bevels, Sliding T, Universal and Ships Car- Penters -Inspection STD (Cancelled, No Superseding Document)
- MS-15192 - Dividers, Type a, Spring; Classification of Defects (Cancelled, No Superseding Document)
- MS-15193 - Dividers, Type B, Firm-Joint; Classification of Defects (Cancelled, No Superseding Document)
- MS-15194 - Dividers, Type C, Wing, Classification of DEF-Ects (Cancelled, No Superseding Document)
- MS-15305 - Square, Combination, With Center Head and Protractor (Use GGG-S-656)
- MS-15306 - Square, Carpenter S Solid Steel (After 31 March 1967 Use GGG-S-656, Type 11)
- MS-15307 - Square, Double, With Interchangeable Blades
- MS-15308 - Square, Thin Steel
- MS-15309 - Square, Try, Carpenters (Use GGG-S-656, Type Iii)
- MS-15310 - Square, Try, Machinist S (Use GGG-S-656)
- MS-15370 - Square, Combination Try and Miter, Carpenters (Use GGG-S-656, Type I)
- MS-15745 - Gage, Marking, Single Bar, Wood Construction (Use GGG-G-31 Type I, Class 2)
- MS-15746 - Gage, Marking, Double Bar, Single Face, Metal Construction (No Superseding Document)
- MS-15747 - Plumb Bobs, Brass, Plain or Quick Precision Adjustment (No Superseding Document)
- MS-15748 - Plumb Bobs, Steel, Solid, Removable or Solid Head (No Superseding Document)
- MS-15790 - Bevel, Sliding T, Wood Handle (Use GGG-B-211)
- MS-15791 - Bevel, Ship Carpenter S (Use GGG-B-211)
- MS-15798 - Divider, Mechanics, Spring Type Round Legs (Use GGG-D-351)
- MS-15799 - Divider, Mechanics, Spring Type Rectangular Legs (Use GGG-D-351)
- MS-15800 - Divider, Mechanics Wing Type (Use GGG-D-351)
- MS-16287 - Gage Thickness (Use GGG-G-17, Type Viii, Class 1
- QPL-18422 - Indicator, Dials and Accessories