FSC 5110: Hand Tools, Edged, Nonpowered
The following documents are a part of this series:- A-A-2307 - File, Hand (American Pattern), Aluminum
- A-A-2308 - File, Hand (American Pattern), Bandsaw Blunt
- A-A-2309 - File, Hand (American Pattern), Cantsaw
- A-A-2310 - File, Hand (American Pattern), Crosscut
- A-A-2311 - File, Hand (American Pattern), Flat
- A-A-2312 - File, Hand (American Pattern), Half Round
- A-A-2313 - File, Hand (American Pattern), Regular
- A-A-2314 - File, Hand (American Pattern), Knife
- A-A-2315 - File, Hand (American Pattern), Lead-Float, Flat
- A-A-2316 - File, Hand (American Pattern) Mill
- A-A-2317 - File, Hand (American Pattern), Pillar
- A-A-2318 - File, Hand (American Pattern), Round, Regular
- A-A-2319 - File, Hand (American Pattern), Round Chain Saw
- A-A-2320 - File, Hand (American Pattern), Square
- A-A-2321 - File, Hand (American Pattern), Taper
- A-A-2322 - File, Hand (American Pattern), Three Square
- A-A-2323 - File, Hand (American Pattern), Warding
- A-A-2324 - File, Hand (American Pattern), Long Angle Lathe
- A-A-2325 - File, Hand (American Pattern), Milled Curved Teeth, Flat Flexible Blade
- A-A-2326 - Rasp, Hand, Cabinet
- A-A-2327 - Rasp, Hand, Horse, Plain, Regular
- A-A-2328 - Rasp Hand, Shoe, Half-Round
- A-A-2329 - Rasp, Hand, Wood
- A-A-2330 - Pliers, Diagonal Cutting
- A-A-2428 - File, Hand (Swiss Pattern) Barrette
- A-A-2429 - File, Hand (Swiss Pattern), Half-Round
- A-A-2430 - File, Hand (Swiss Pattern)
- A-A-2431 - File, Hand (Swiss Pattern), Knife
- A-A-2432 - File, Hand (Swiss Pattern), Pillar, Extra-Narrow
- A-A-2433 - File, Hand (Swiss Pattern), Pillar, Narrow
- A-A-2434 - File, Hand (Swiss Pattern), Pillar, Regular
- A-A-2435 - File, Hand (Swiss Pattern), Pippin
- A-A-2436 - File, Hand (Swiss Pattern), Round, Straight
- A-A-2437 - File, Hand (Swiss-Pattern), Round, Taper
- A-A-2438 - File, Hand (Swiss Pattern), Slitting
- A-A-2439 - File, Hand (Swiss Pattern), Square
- A-A-2440 - File, Hand (Swiss Pattern), Three-Square
- A-A-2441 - File, Hand (Swiss Pattern), Warding
- A-A-2442 - File, Hand (Swiss Pattern), Needle, Round
- A-A-2443 - File, Hand (Swiss Pattern), Needle, Half-Round
- A-A-2444 - File, Hand (Swiss Pattern), Needle, Three-Square
- A-A-2445 - File, Hand (Swiss Pattern), Needle, Crossing
- A-A-2446 - File, Hand (Swiss Pattern), Needle, Knife
- A-A-2447 - File, Hand (Swiss Pattern), Needle, Flat
- A-A-2448 - File, Hand (Swiss Pattern), Needle, Square
- A-A-2449 - File, Hand (Swiss Pattern) Needle, Barrette
- A-A-2450 - File, Hand (Swiss Pattern), Needel, Joint, Round-Edge
- A-A-2451 - File, Hand (Swiss Pattern), Needle, Equaling
- A-A-2452 - File, Hand (Swiss Pattern), Needle, Slitting
- A-A-2453 - File, Hand (Swiss Pattern), Needle, Marking, Half-Round
- A-A-2454 - File, Hand (Swiss Pattern), Screwhead
- A-A-2455 - File, Hand (Swiss Pattern), Contact-Point
- A-A-2456 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 1
- A-A-2457 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 3
- A-A-2458 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 4
- A-A-2459 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 5
- A-A-2460 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 6
- A-A-2461 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 7
- A-A-2462 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 8
- A-A-2463 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 9
- A-A-2464 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 10
- A-A-2465 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 11
- A-A-2466 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 12
- A-A-2467 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 13
- A-A-2468 - Rifler, Die Sinkers (Swiss Pattern), Shape Number 14
- A-A-2469 - Riffler, Die Sinkers, (Swiss Pattern), Shape Number 15
- A-A-2470 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 16
- A-A-2471 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 17
- A-A-2472 - Riffler, Die Sinkers (Swiss Pattern), Shape Number 18
- A-A-2475 - Chisel, Cold, Hand (Nonsparking & Nonmagnetic)
- A-A-2480 - Saw, Hand, Crosscut (Nonsparking & Nonmagnetic)
- A-A-2481 - Scraper, Ship (Nonsparking & Nonmagnetic)
- A-A-2482 - Scraper, Spray Booth (Nonsparking & Nonmagnetic)
- A-A-2493 - Wrench, Open End (Nonsparking and Nonmagnetic)
- A-A-2506 - Pliers, Diagonal Cutting (Nonsparking & Nonmagnetic)
- A-A-2507 - Chisel, Diamond Point, Hand (Nonsparking & Nonmagnetic)
- A-A-2551 - Drill, Hand
- A-A-2552 - Drill, Push
- A-A-2553 - Drill, Breast
- A-A-2555 - Drill, Masonry, Hand (Star (Four-Flute) Drill)
- A-A-2556 - Drill, Masonry, Hand (Twist-Flute Drill)
- A-A-2558 - Drill, Ratchet (Reversible)
- A-A-2562 - Bar, Chisel
- A-A-2880 - Chisel, Brick
- A-A-2928 - Reamer, Hand, Straight Fluted
- A-A-2929 - Reamer, Hand, Finishing, Morse Taper
- A-A-2930 - Reamer, Hand, Taper Pin
- A-A-2931 - Reamer, Hand, Brown & Sharpe Taper Socket
- A-A-2936 - Reamer, Hand, Burring, Pipe
- A-A-2937 - Reamer, Hand, Adjustable
- A-A-2967 - Punch, Cutting, Revolving Head
- A-A-2969 - Cutter, Angle, Hand Operated
- A-A-2976 - Handle, File (Adjustable Type)
- A-A-2981 - Machete, Rigid Handle
- A-A-3018 - Pilot, Reamer
- A-A-3019 - Reamer, Hand, Repairman's T-Handle
- A-A-3024 - Cutter, Gage-Glass
- A-A-3027 - Cutter, Wire Rope, Impact (Hammer Action)
- A-A-3029 - Cutter, Wire Rope, Hand-Operated, Hydraulic, Horizontal Cutting
- A-A-3030 - Cutter, Glass, Wheel Type
- A-A-3047 - Cutter, Bolt
- A-A-3051 - Frame, Coping Saw
- A-A-452 - Frame, Jewelers Saw (Adjustable Length)
- A-A-453 - Frame, Hand Hacksaw, Adjustable Length
- A-A-50694 - Cutter, Tile, Asphalt, Plastic, Rubber
- A-A-52130 - Slotting Tool, Commutator, Hand; & Slotter & Scraper, Commutator, Hand
- A-A-52207 - Cutter, Barbed Wire, Insulated Handles, Hand Operated
- A-A-52208 - Cutter, Cable, Hand Operated, With Groping Hook Guide
- A-A-58046 - Saw, Hand, Finger Grip, Survival
- A-A-59100 - Knife, Pocket, General Purpose
- AN-8500 - Stamp Inspector's, an, Steel, Impression
- GGG-A-151 - Adz +Cancelled, 1994, No S/S Document+
- GGG-A-926 - Ax, (Single Bit, Double Bit, Pick Head & Mattock Head)
- GGG-B-1351 - Broaches, Jeweler's and Pivot
- GGG-B-451 - Blade, Hand Hacksaw & Blade, Power Hacksaw
- GGG-B-671 - Brace, Bit, Ratchet, Brace, Corner, & Extensions, Bit
- GGG-C-00748 - Cutter, Circle (Adjustable); for Caskets and Washers
- GGG-C-2773 - Cylinder Reconditioning & Correction Equipment: Portable
- GGG-C-311 - Chisels & Gouges, Woodworking
- GGG-C-313 - Chisels, Hand: Cape, Diamond Point, Cold, Round Nose, & Side Cutting
- GGG-C-315 - Chisel, Brick
- GGG-C-430 - Cleaner, Valve, Stem Guide +Cancelled, 1987, No S/S Document+
- GGG-C-441 - Clippers, Bolt +Cancelled, 1957, Superseded By GGG-C-740
- GGG-C-735 - Cutter, Angle, Hand Operated+Canceled,Superseded By A-A-2969+
- GGG-C-736 - Cutter, Asbestos Cement Shingle,Hand Operated +Cancelled, 1987, No S/S Document+
- GGG-C-740 - Cutter, Bolt+Canceled, Superseded By A-A-3047+
- GGG-C-748 - Cutter, Circle (Adjustable); for Gaskets & Washers
- GGG-C-749 - Cutter, Cable, Hand Operated
- GGG-C-750 - Cutter, Cable, Hand Operated, Light Duty
- GGG-C-751 - Cutter, Glass, Wheel Type (for Sheet Glass & Round Gage Glass)+Canceled, Superseded By A-A-30
- GGG-C-771 - Cutter, Pipe, & Cutters, Tube
- GGG-C-775 - Cutter, Pipe (Chain Type)
- GGG-C-781 - Cutter, Rod, (Hand Operated) (Cancelled, 1977, No Superseding Document)
- GGG-C-800 - Cutters, Wire Rope, Hand Operated (Canceled, Superseded by A-A-3029)
- GGG-C-835 - Cutter, Steel Strapping
- GGG-D-280 - Dies, Metal Stamping, Hand, & Die Set, Hand (Letter & Numeral)
- GGG-D-651 - Drill, Breast No S/S Document
- GGG-D-671 - Drill, Hand, & Push +Cancelled, 1994, No S/S Document+
- GGG-D-691 - Drill, Masonry, Hand and Holder, Masonry Drill Hand+Canceledno S/S Document+
- GGG-D-698 - Drill, Ratchet (Reversible) +Cancelled, 1994, No S/S Document+
- GGG-F-1391 - Filer, Piston Ring +Cancelled, 1994, No S/S Document+
- GGG-F-311 - Figures and Letters, Stamping, Steel +Cancelled, 1954, Superseded By GGG-D-280
- GGG-F-325 - File, Hand, (American Pattern) & Rasp, Hand
- GGG-F-331 - File, Hand, (Swiss Pattern) +Cancelled, 1994, No S/S Document+
- GGG-F-665 - Frame, Butcher S Hand Saw, & Blade, Butchershandsaw +Cancelled, 1963, Superseded By GGG-S-60
- GGG-F-671 - Frame, Hand Hacksaw; Frame Jewler's & Frame. Coping Saw
- GGG-F-675 - Frame, Hand, Hacksaw (Close Quarters,Straight6 Blade Capacity) +Canc, 1974, No S/S Doc
- GGG-H-131 - Hatchet (Claw, Half, Lathing, Broad & Barrel)
- GGG-I-100 - Ice Scrapper & Chipper, Sidewalk (Superseded by A-A-2934)
- GGG-K-450 - Knife, Craftsman's Multipurpose (Stencil, Etching, and Cutting, Removable Blades)
- GGG-K-471 - Knife, Draw +Cancelled, 1987, No S/S Document+
- GGG-K-484 - Knife, Pocket, (Heavy Duty)
- GGG-K-494 - Knives; General Purpose Shop, Detachable Blade
- GGG-K-501 - Knife, Stencil
- GGG-M-45 - Machetes, Rigid Handle+Canceled, Superseded By A-A-2981+
- GGG-M-451 - Miter Box, Woodworkers
- GGG-N-350 - Nippers and Pincers
- GGG-P-330 - Pick, Segment
- GGG-P-436 - Planes, Block, Rabbet, Bench, Matching & Routing
- GGG-P-468 - Pliers, Diagonal Cutting
- GGG-P-833 - Punches, Cutting
- GGG-P-836 - Punch & Die, Knockout
- GGG-P-840 - Cutter, Cable, Hand Operated Light Duty
- GGG-R-180 - Reamers, Hand & Machine: Arbors, Shell Reamer: & Pilots, Adjustable Hand Reamer
- GGG-S-113 - Scraper, Bearing
- GGG-S-115 - Scraper, Carbon, Flexible +Cancelled, 1977, No S/S Document+
- GGG-S-116 - Scrapers, Ship, (Paint & Scale Removing)
- GGG-S-118 - Scraper, Wood & Glass
- GGG-S-271 - Spokeshave +Cancelled, 1978, No S/S Document+
- GGG-S-278 - Shears & Scissors
- GGG-S-281 - Shears, Metal Cutting, Electric (Portable) +Cancelled, 1964,No S/S Document+
- GGG-S-286 - Shears, Roaching +Cancelled, 1960, No S/S Document+
- GGG-S-291 - Shears, Metal Cutting, Bench & Hand
- GGG-S-64 - Saw, Bow & Crosscut, one-Man & Two Man
- GGG-S-665 - Stripper, Cable, Hand; & Stripper, Wire Hand
- GGG-S-735 - Stamping & Marking Equipment; General Specification For
- GGG-S-735/5 - Stamping and Marking Equipment, Dies, Metal Stamping, Hand Type
- GGG-S-735/6 - Stamping and Marking Equipment, Dies, Lumber Stamping, Hammer Type
- GGG-S-75 - Saw Set, Hand
- GGG-S-793 - Stripper, Wire, Bench
- GGG-T-563 - Tools Blacksmith's:Chisels, Flatters, Fullers, Hardies, Boltheading Tools, Punches & S
- MIL-A-1600 - Axe, Ice, Mountain (No Superseding Document)
- MIL-A-1810 - Axe, Single Bit (No Superseding Document)
- MIL-A-7133 - Ax, Pick Head, Rubber-Coated Grip (ASG)
- MIL-B-1701 - Borers, Bung or Tap
- MIL-C-10362 - Cutter, Reefing Line, M2 (Use MIL-C-46992)
- MIL-C-16941 - Chisel, Thonging
- MIL-C-1891 - Cutter, Cable, Submarine Mine
- MIL-C-21262 - Chisel, Cold, Hand, Nonsparking and Nonmagnetic
- MIL-C-22492 - Cutter, Circle, Self-Centering
- MIL-C-2460 - Cutter, Cable, m1, Assembling, Marking, and Packing.
- MIL-C-26750 - Cutoff and Burring Tool, Blind-Rivet, 1-8 Inch To 9-32 Inch (Supersedes 50463)
- MIL-C-386 - Cutter, Barbed Wire, Insulated Handles, Hand Operated (Superseded by A-A-52207)
- MIL-C-3958 - Cutter, Cable, Hand Operated, With Groping Hook Guide (Superseded by A-A-52208)
- MIL-C-43212 - Chisel, Thonging
- MIL-C-45076 - Cutter, Pipe, Hand-Operated, Knife Type (No Superseding Document)
- MIL-C-5668 - Cutter, Aircraft Cable
- MIL-C-679 - Cutter, Rivet, Shear Type (No Superseding Document)
- MIL-C-82069 - Cylinder Reconditioning and Correction Equipment: Portable (Superseded by GGG-C-2773)
- MIL-C-8614 - Cutter, Cable, Aerial Tow Target, Mk Vii (No Superseding Document)
- MIL-C-9912 - Cutter, Tile, Asphalt, Plastic, Rubber (Superseded by A-A-50694)
- MIL-D-1617 - Die Set, Leather Stamping, Hand (Superseded by GGG-D-280B)
- MIL-D-2214 - Drill, Mining, 2-1/2 Inch, Sectional Handles
- MIL-D-922 - Dies and Punches, Dimpling
- MIL-F-2559 - File and Rasp, Flat
- MIL-H-15424 - Hand Tool, Packaging of (Use PPP-P-40)
- MIL-I-19709 - Inspection Stamping and Marking Equipment, Stencils, Rubber Stamps, Fixed Type, Dies, and Press, Lead Seal (Use GGG-S-00735)
- MIL-K-13419 - Knife, Pocket, TL-29 (Use GGG-K-484)
- MIL-K-1950 - Knives, Shoeing
- MIL-K-25594 - Knife, Pocket, Hook Blade and Snap Blade mc-1 (No Superseding Document)
- MIL-K-818 - Knife, Pocket, General Purpose (Superseded by A-A-59100)
- MIL-M-20270 - Machete, Rigid Handle (Superseded by MIL-M-2301B)
- MIL-M-2301 - Machete, 18-Inch Blade (Use GGG-M-45)
- MIL-O-1599 - Outfit, Numbering, Tag, Metal, Identification
- MIL-P-1251 - Post, Drilling (No Superseding Document)
- MIL-P-19290 - Pliers, Nonsparking and Nonmagnetic (No Superseding Document)
- MIL-P-2001 - Punch, Cutting, Revolving Head (No Superseding Document)
- MIL-P-21455 - Pliers, Diagonal Cutting With Cushion Throat (Superseded by GGG-P-468)
- MIL-S-17709 - Slotting Tool, Commutator, Hand: and Slotter and Scrapper (Superseded by A-A-52130)
- MIL-S-17880 - Stripper, Cable, Hand
- MIL-S-21263 - Scraper, Ship, Nonsparking and Nonmagnetic (No Superseding Document)
- MIL-S-43032 - Saw, Hand, Crosscut, 24-Inch Blade (No Superseding Document)
- MIL-S-9964 - Saw, Hand, Finger Grip, Survival, Type mb-2 (Superseded by A-A-58046)
- MIL-T-5611 - Tool, Deburring (Aircraft Tubing)
- MIL-T-83523 - Tools, Fiber Optic (No Superseding Document)
- MIL-T-83523/9 - Tools, Fiber Optic, Scribe, Conical and Wedge, Type I (No Superseding Document)
- MS-15156 - Gage, Draw; Saddles Slide, Hand, Leather Cutting, Classification of Defects (No Superseding Document)
- MS-15168 - Punches, Cutting, Hand (Revolving Head), Sad-Dlers, Classification of (Cancelled, No Superseding Document)
- MS-15169 - Scissors and Shears Inspection Standard (Cancelled, No Superseding Document)
- MS-15289 - Saws, Hand, Type 1, Classes 1 and 2 Inspection Standard (Cancelled, No Superseding Document)
- MS-15290 - Saws, Hand, Metal Cutting; Inspection Standard (Cancelled,No Superseding Document)
- MS-15295 - Saw Set, Hand Inspection Standard (Cancelled, No Superseding Document)
- MS-15378 - Nippers, End Cutting, Detachable Cutter, Flat
- MS-15379 - Nippers, End Cutting, Integral Cutter, Normal Duty
- MS-15385 - Pliers, Diagonal Cutting, Regular Nose, Plain
- MS-15474 - Die, Lumber Stamping Hammer, Double-Faced, Inspection and Acceptance, DOD (Use MIL-I-19709)
- MS-15492 - Pliers, Diagonal Cutting, Short Nose (Use GGG-P-471)
- MS-15493 - Pliers, Diagonal Cutting, Regular Nose, (With Stripping Notches, Sleeve Openings and Skinning Hole)
- MS-15558 - Lamp, Incandesent, T-5, Candelabra Prefocusing, Single Contact
- MS-15627 - Files, Hand, Barrette (Swiss Pattern)
- MS-15628 - File, Hand, Crochet (Swiss) Pattern(
- MS-15629 - Files, Hand, Crossing (Swiss Pattern)
- MS-15630 - Files, Hand, Equaling (Swiss Pattern)
- MS-15631 - Files, Hand, Half-Round (Swiss Pattern)
- MS-15632 - Files, Hand, (Swiss Pattern)
- MS-15633 - Files, Hand, Joint (Swiss Pattern)
- MS-15634 - Files, Hand, Knife (Swiss Pattern)
- MS-15635 - Files, Hand, Pillar (Swiss Pattern)
- MS-15636 - Files, Hand, Pippin (Swiss Pattern)
- MS-15637 - Files, Hand, Round, Straight (Swiss Pattern)
- MS-15638 - Files, Hand, Round, Taper (Swiss Pattern)
- MS-15639 - Files, Hand, Slitting (Swiss Pattern)
- MS-15640 - File, Square (Swiss Pattern)
- MS-15641 - Files, Hand, Three-Square (Swiss Pattern)
- MS-15642 - Files, Hand, Warding (Swiss Pattern)
- MS-15643 - Files, Hand, Needle, Round (Swiss Patter)
- MS-15644 - Files, Hand, Needle, Half-Round (Swiss Pattern)
- MS-15645 - Files, Hand, Needle, Three-Square (Swiss Pattern)
- MS-15646 - Files, Hand, Needle, Crossing (Swiss Pattern)
- MS-15647 - Files, Hand, Needle, Knife (Swiss Pattern)
- MS-15648 - Files, Hand, Needle, Flat (Swiss Pattern)
- MS-15649 - Files, Hand, Needle, Square (Swiss Pattern)
- MS-15650 - Files, Hand, Needle, Barrette (Swiss Pattern)
- MS-15651 - Files, Hand, Needle, Joint, Round-Edge (Swiss Pattern)
- MS-15652 - Files, Hand, Needle, Equaling (Swiss Pattern)
- MS-15653 - Files, Hand, Needle, Slitting (Swiss Pattern)
- MS-15654 - Files, Hand, Needle, Marking, Half-Round (Swiss Pattern)
- MS-15656 - Files, Hand, Die Sinkers, Round (Swiss Pattern)
- MS-15657 - Files, Hand, Die Sinker, Pippin or Oval One Sharp Edge (Swiss Pattern)
- MS-15658 - Files, Hand, Die Sinkers, Three-Square (Swiss Pattern)
- MS-15659 - Files, Hand, Die Sinker, Oval (Swiss Pattern)
- MS-15660 - Files, Hand, Die Sinkers, Knife (Swiss Pattern)
- MS-15661 - Files, Hand, Die Sinkers, Flat (Swiss Pattern)
- MS-15662 - Files, Hand, Die Sinkers, Auriform (Swiss Pattern)
- MS-15663 - Files, Hand, Die Sinkers, Square (Swiss Pattern)
- MS-15664 - Files, Hand, Die Sinkers, Flat, One Safe Edge (Swiss Pattern)
- MS-15665 - Files, Hand, Die Sinkers, Half-Round (Swiss Pattern)
- MS-15666 - Files, Hand, Die Sinkers, Crochet (Swiss Pattern)
- MS-15667 - Files, Hand, Die Sinkers, Lozenge (Swiss Pattern)
- MS-15668 - Files, Hand, Die Sinkers Rifflers Regular, No. 1 Shape (Swiss Pattern)
- MS-15669 - Files, Hand, Die Sinkers Rifflers Regular, No. 2 Shape (Swiss Pattern)
- MS-15670 - Files, Hand, Die Sinkers Rifflers Regular, No. 3 Shape (Swiss Pattern)
- MS-15671 - Files, Hand, Die Sinkers Rifflers Regular, Shape No. 4 (Swiss Patterns)
- MS-15672 - Files, Hand, Die Sinkers Rifflers Regular, No. 5 Shape (Swiss Pattern)
- MS-15673 - Files, Hand, Die Sinkers Rifflers Regular, No. 6 Shape (Swiss Pattern)
- MS-15674 - Files, Hand, Die Sinkers Rifflers Regular, No. 7 Shape (Swiss Pattern)
- MS-15675 - Files, Hand, Die Sinkers Rifflers Regular, No. 8 Shape (Swiss Pattern)
- MS-15676 - Files, Hand, Die Sinkers Rifflers Regular, No. 9 Shape (Swiss Pattern)
- MS-15677 - Files, Hand, Die Sinkers Rifflers, Regular, No. 10 Shape (Swiss Pattern)
- MS-15678 - Files, Hand, Die Sinkers Rifflers Regular, No. 11, Shape, (Swiss Pattern)
- MS-15679 - Files, Hand, Die Sinkers Rifflers Regular, No. 12 Shape (Swiss Pattern)
- MS-15680 - Files, Hand, Die Sinkers Rifflers, Regular, No. 13Shape (Swiss Pattern)
- MS-15681 - Files, Hand, Die Sinkers Rifflers, Regular, No. 14, Shape, (Swiss Pattern)
- MS-15682 - Files, Hand, Die Sinkers Rifflers Regular, No. 15 Shape (Swiss Pattern)
- MS-15683 - Files, Hand, Die Sinkers Rifflers Regular, No. 16 Shape (Swiss Pattern)
- MS-15684 - Files, Hand, Die Sinkers Rifflers Regular, No. 17 Shape (Swiss Pattern)
- MS-15685 - Files, Hand, Die Sinkers Rifflers Regular, No. 18, Shape (Swiss Pattern)
- MS-15686 - Files, Hand, Contact Point (Swiss Pattern)
- MS-15781 - Stripper, Wire, Hand, Pivot Handles
- MS-15782 - Stripper, Wire, Hand, Floating Handles
- MS-15783 - Stripper, Cable, Hand, Adjustable Toggle Handle
- MS-15784 - Stripper, Cable, Hand, Hinged Handle
- MS-15785 - Blade, Jeweler S Saw
- MS-15786 - Blades, Coping Saw, Pin End
- MS-15821 - Saws, Hole, and Arbors, Hole Saw
- MS-16263 - Blades, Hand Hacksaw, High-Speed Steel, All-Hard, Flexible Back
- MS-16288 - Knife, Craftsman's, Plumbers - Chipping (Cancelled, No Replacement)
- MS-16290 - Knives, Scraping, Semiflexible and Stiff
- MS-16291 - Knife, Craftsman's, Cable, Lead-Covered, Chipping and Splitting
- MS-16292 - Knife, Craftsman's, Shoe
- MS-16293 - Knife, Craftsman's, Hawkbill, Linoleum, Rigid
- MS-16294 - Knife, Craftman's Hawkbill, Linoleum, Folding Blade
- MS-16313 - Cutter, Steel Strapping, Heavy Duty, Forward Cutting Action
- MS-16314 - Cutter, Steel Strapping, Light Duty, Fixed Cutting Blade
- MS-16315 - Cutters, Glass, Circle, Adjustable Bar With Integral Cutting Head
- MS-16316 - Cutter, Glass, Gage, Two Beam Plier Handle
- MS-16317 - Cutter, Glass, Sheet or Standard, Single Fixed Wheel
- MS-16318 - Cutter, Glass, Sheet or Standard, Turret Head
- MS-16319 - Cutter, Glass, Circle, Adjustable Bar and Cutter Head
- MS-16320 - Cutter, Cable, Hand Operated, Hydraulic
- MS-16321 - Punch and Die, Knockout, Light Duty, (Chassis), Square Hole
- MS-16322 - Punches and Dies, Knockout, Heavy Duty (Conduit)
- MS-16323 - Punches and Dies, Knockout, Light Duty, (Chassis), Round Hole
- MS-16324 - Saw, Hand, Rip, Skew-Back
- MS-16325 - Saws, Hand, Crosscut, Skew-Back
- MS-16326 - Saw, Compass, Hand
- MS-16327 - Saw, Cable, Hand
- MS-16328 - Saws, Back, Hand
- MS-16329 - Saw, Nested, Hand (Use GGG-S-65 Type Xi)
- MS-16330 - Saw, Miter Box, Hand
- MS-16331 - Saw, Keyhole, Hand, Woodcutting
- MS-16332 - Saws, Hand, Metal-Cutting
- MS-16333 - Saw, Hand, Docking
- MS-16365 - Cutter, Pipe, Sliding Feed Member
- MS-16366 - Cutter, Tube, Enclosed Feed Mechanism
- MS-16386 - Punch, Clip, Sheet Metal Hand
- MS-16387 - Punch and Die Set, Metal Cutting Hand, Circular, Heavy Duty
- MS-16388 - Punch and Die Sets, Metal Cutting, Hand, Circular, Light Duty
- MS-16389 - Plane, Block, Adjustable (Use GGG-P-436, Type 1, Class a)
- MS-16390 - Planes, Bench, Smooth, Jack, Fore, and Jointer
- MS-16391 - Plane, Rabbet, Bull-Nose
- MS-16392 - Plane, Rabbet, Regular
- MS-16394 - Plane, Combination
- MS-16506 - Shears, Metal Cutting, Hand, Combination
- MS-16507 - Shears, Metal Cutting, Hand, Circular Cut, Inlaid Blades
- MS-16508 - Shears, Bench, Hand, Metal Cutting, Compound Lever
- MS-16509 - Shears, Metal Cutting, Hand, Compound Lever, Alloy Steel Blades
- MS-16510 - Shears, Bench, Hand, Metal Cutting, Single Lever
- MS-16511 - Shears, Metal Cutting, Hand, Straight Cut, Inlaid Blades
- MS-16512 - Saw, Crosscut, Two Man, Medium Wide Straight Back
- MS-16513 - Saws, Crosscut, Two Man, Uniform Width
- MS-16514 - Saw, Crosscut, Two Man, Wide Straight Back
- MS-16515 - Saws, Crosscut, One Man
- MS-16516 - Frame, Hand Hacksaw, Adjustable Length, Flat, Open Grip, Medium Throat
- MS-16517 - Frame, Hand Hacksaw, Adjustable Length, Flat, Closed Grip
- MS-16518 - Frame, Hand Hacksaw, Adjustable Length, Round, Closed Grip
- MS-16519 - Frame, Hand Hacksaw, Nonadjustable, Deep Throat
- MS-16520 - Frame Jeweler S Saw, Adjustable Length, Medium Throat
- MS-16521 - Frame, Jeweler S Saw, Adjustable Length, Deep Throat
- MS-16522 - Frames, Coping Saw, Medium and Deep Throated
- MS-16523 - Drill, Ratchet, Reversible, American Standard, Self-Holding Taper Socket
- MS-16525 - Slotting Tool, Commutator, Hand
- MS-16526 - Slotter and Scraper, Commutator, Hand
- MS-16527 - Hatchet, Claw
- MS-16528 - Hatchet, Half
- MS-16529 - Hatchet, Lathing
- MS-16530 - Hatchet, Broad
- MS-16531 - Hatchet, Barrel (Produce or Box Opening)
- MS-16537 - Chisels, Butt, Woodworking, Square Edge
- MS-16538 - Chisels, Firmer, Bevel Edge
- MS-16539 - Chisels, Framing, Socket
- MS-16540 - Chisels, Paring, Tanged, Straight Shank
- MS-16541 - Chisel, Turning, Tanged, Left Skew
- MS-16542 - Chisel, Turning, Tanged, Parting
- MS-16543 - Chisels, Turning, Tanged, Regular Skew
- MS-16544 - Chisel, Turning, Tanged, Right Skew
- MS-16545 - Chisels, Turning, Tanged, Round Point
- MS-16546 - Chisels, Turning, Tanged, Spear Point
- MS-16547 - Chisels, Turning, Tanged, Square Point
- MS-16548 - Gouges, Firmer, Socket, Inside Bevel
- MS-16549 - Gouges, Firmer, Socket, Outside Bevel
- MS-16550 - Gouges, Turning, Tanged
- MS-16551 - Gouges, Paring, Tanged, Bent Shank
- MS-16553 - Socket Slick, Woodworking, Oval Back
- MS-16554 - Gouges, Spoon, Woodworking
- MS-16639 - Scraper, Blade
- MS-16640 - Scrapers, Shave Hook (Cancelled, No Replacement)
- MS-16641 - Scraper, Wood, Box Type, Hinged Handle
- MS-16659 - Cutting Wheels, Pipe Cutter
- MS-16660 - Knives, Draw, Fixed Handle
- MS-16661 - Knives, Draw, Folding Handle
- MS-16849 - Adz, Carpenters, Full Head (Use GGG-A-151)
- MS-16850 - Adz, Railroad, Full Head (Use GGG-A-151)
- MS-16851 - Adz, Ship Carpenters , Spur Head, Plain Bit (Use GGG-A-151)
- MS-16859 - Dies, Lumber Stamping, Hammer Type, Inspection
- MS-16881 - Cutter, Rivet, Shear Type
- MS-16882 - Chisels, Blacksmiths , Cold, Handled
- MS-16883 - Chisels, Blacksmiths , Hot Handled
- MS-16886 - Brace, Bit, Corner
- MS-16887 - Braces, Bit, Ratchet, Box Ratchet With Ball Bearing Chuck
- MS-16888 - Cutters, Bolt, Rigid Head, With Adjusting Levers, Clipper Cut (Close Cutting)
- MS-16889 - Cutters, Bolt, Rigid Head, With Adjusting Levers, Angular Cut, (Flush Cutting)
- MS-17065 - Drill, Masonry, Hand, Star Type
- MS-17066 - Drill, Masonry, Hand, Twist Flute
- MS-17067 - Holder, Masonry Drill, Hand, Rubber Grip
- MS-17068 - Chisels, Cape, Hand, Normal and Heavy Duty
- MS-17069 - Chisels, Diamond Point, Hand, Normal and Heavy Duty
- MS-17070 - Chisels, Cold, Hand, Regular and Long Length
- MS-17071 - Chisel, Rivet Buster, Hand
- MS-17072 - Chisels, Round Nose, Hand, Half, Normal Duty
- MS-17073 - Chisels, Round Nose, Hand, Full
- MS-17074 - Chisel, Side-Cutting, Hand
- MS-17075 - Splitting Tool, Bushing, Hand
- MS-17083 - Plane, Circular
- MS-17109 - Cutter, Circle, Block, Movable Pivoting, Without Extensions
- MS-17110 - Cutter, Circle, Drill Pivoting, Bit Shank
- MS-17111 - Cutter, Circle, Center Pivoting, Rectangular Crossbeam
- MS-17112 - Cutter, Circle, Block, Movable Pivoting With Extensions
- MS-17113 - Cutter, Circle, End Pivoting, Nonadjustable Pivot Holder
- MS-17116 - Broaches and Broach Sets, Jeweler S, Cutting, Five Cornered
- MS-17117 - Broaches and Broach Set, Jeweler S, Round
- MS-17118 - Broach, Jeweler S, Pivot
- MS-17170 - Cutter, Wire Rope, Hand Operated, Hydraulic, Horizontal Cutting
- MS-17171 - Cutters, Wire Rope, Hand Operated Impact (Hammer Action)
- MS-17265 - Nippers, End Cutting, Adjustable Jaws, Flat
- MS-17266 - Nippers, End Cutting, Integral Cutter, Light Duty (Jeweler S)
- MS-17267 - Pincers, Farrier S
- MS-63041 - Chisel, Oil Groove, Hand
- NN-H-106 - Handles; Wood, Miscellaneous (for) Tools
- NN-H-85 - Handle, File (Adjustable Type)
- QPL-19290 - Pliers, Nonsparking and Nonmagnetic
- QPL-21262 - Chisels, Cold, Hand, Nonsparking and Nonmagnetic (No Superseding Document)
- QPL-21263 - Scraper, Ship, Nonsparking and Nonmagnetic (No Superseding Document)
- QPL-GGG-B-451 - Blade, Hand Hacksaw and Blade, Power Hacksaw
- QPL-GGG-F-325 - File, Hand, (American Pattern) and Rasp, Hand
- QPL-GGG-F-331 - Files, Hand, (Swiss Pattern)