FSC 4720: Hose and Flexible Tubing
The following documents are a part of this series:- A-A-50351 - Hose, Bronze, Annular Corrugated Metal, Single Braid Flexible, Gas Tight
- A-A-52047 - Tubing, Nonmetallic (Rubber and Plastic)
- A-A-52413 - Hose, Rubber; Oil Suction, Wire-Reinforced
- A-A-52426 - Hose and Hose Assemblies, Non-Metallic, Silicone, Polyester and Wire Reinforced (for Coolant and Heating Systems of Diesel and Gasoline Powered Engines)
- A-A-52435 - Hose Assemblies, Metal: Flexible, Fuel & Oil
- A-A-52486 - Mount, Shipping Container, Resilient: Shock and Vibration Damping
- A-A-52546 - Hose, Preformed:Semi-Flexible, Reinforced
- A-A-52546/1 - Hose, Preformed, Air Cleaner, Semi-Flexible, Heavy Duty 517 Kilopascals (75 PSI) Burst
- A-A-52547 - Hose and Hose Assemblies, Rubber: Fuel and Oil
- A-A-52547/1 - Hose Assembly, Nonmetallic: Fuel and Oil, Medium Pressure, Flared Tube
- A-A-52547/2 - Hose Assembly, Rubber: Fuel and Oil, Low Pressure, Flared Tube
- A-A-52548 - Hose Assembly, Rubber (Hydraulic, Flexible)
- A-A-52548/1 - Hose Assembly, Rubber: Hydraulic and Pneumatic, Medium Pressure, Flared Tube
- A-A-52548/2 - Hose Assembly, Nonmetallic: Hydraulic & Pneumatic High Pressure, Flared Tube
- A-A-52554 - Hose & Hose Assemblies, Nonmetalic: Elastomeric, Liquid Fuel
- A-A-53848 - Tubing, Nonmetalic (Rubber)
- A-A-55697 - Tube, Nonmetallic; Polyvinyl Chloride (PVC) Flexible (for Laboratory and Medical Use)
- A-A-55859 - Tube, Nonmetallic; Polyvinyl Chloride (Pvc) Flexible (General Use)
- A-A-59159 - Hose & Hose Assemblies, Rubber, Steam
- A-A-59270 - Hose & Hose Assemblies, Non-Metallic (Rubber, Plastic)
- A-A-59452 - Hose, Metal
- A-A-59565 - Hose, Rubber, and Hose Assemblies, Rubber: Pneumatic (Yarn or Fabric Reinforced)
- A-A-59566 - Hose, Rubber, and Hose Assemblies, Rubber, Smooth Bore, Water Suction and Discharge
- A-A-59567 - Hose and Hose Assemblies, Rubber (Yarn or Fabric Reinforced) Water Service
- A-A-59567/1 - Hose Assemblies, Garden, Water, and Water Suction, Ribbed Shank (Short or Long), with Pin Lug Swivel
- A-A-59567/2 - Hose Assemblies, Garden, Water, and Water Suction, Expansion Shank, Compression Ferrule, or Hose Clamp
- A-A-59567/3 - Hose Assembly, Garden, Water, and Water Suction, Rocker Lug Swivel Type Coupler
- A-A-59567/4 - Hose Assembly, Garden, Water, and Water Suction, Expansion Ring, Pin Lug Swivel Type Coupler
- A-A-59567/5 - Hose Assembly, Garden, Water, and Water Suction, Long Handle Swivel Type Coupler
- A-A-59567/6 - Hose Assembly, Garden, Water, and Water Suction, Shank Type Coupler and Adapter with Interlocking Clamps
- A-A-59567/7 - Hose Assembly, Garden, Water, and Water Suction, Hex, Shank (Short or Long) Type Coupler
- A-A-59613 - Hose and Hose Assemblies, Nonmetallic Spray
- A-A-59735 - Hose, Metallic
- AIR-6444 - Aerospace Hose Assembly Reliability Discussion (Draft Document Only)
- AIR-797 - Hose Characteristics and Selection Chart
- AMS-3380 - Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin, Wire Braid Reinforced
- AN-6264 - Hose Assembly - Detachable End Fitting Type, Swivel Fittings, Medium High Pressure Fuel, Oil and Coolant (Superseded by ms-28741)
- AN-6270 - Hose Assembly - Detachable Swivel Fitting, Low Pressure
- API-1529 - Aviation Fueling Hose & Hose Assemblies
- API-BUL-1529 - Aviation Fueling Hose
- ARP-1153 - Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing
- AS-1043 - Safety Wire Holes, Hex, Fitting, Location of, Design Standard
- AS-1055 - Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components
- AS-1072 - Sleeve, Hose Assembly, Fire Protection
- AS-1073 - Sleeve Hose Assembly, Heat Shrinkable
- AS-115 - Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 Deg F, Straight to Straight, Flareless, Lightweight
- AS-116 - Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 Deg F, Straight to 45 degree, Flareless, Lightweight
- AS-117 - Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 Deg F, Straight to 90 degree, Flareless, Lightweight
- AS-118 - Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 Deg F, 45 degree to 45 degree, Flareless, Lightweight
- AS-119 - Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 Deg F, 45 degree to 90 degree, Flareless, Lightweight
- AS-120 - Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 Deg F, 90 degree to 90 degree, Flareless, Lightweight
- AS-1505 - Hose, Air Duct Flexible, Annular Convoluted, Self Extinguishing
- AS-1506 - Hose, Air Duct, Semiflexible, Sleeve Section, Unreinforced, Self Extinguishing
- AS-153 - HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DegF, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT
- AS-154 - HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DegF, STRAIGHT TO 45 Deg, FLARED, LIGHTWEIGHT
- AS-1543 - Hose, Air Duct, Semiflexible, Sleeve Section Unreinforced, Self Extinguishing, Nomex
- AS-155 - HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI , 400 DegF, STRAIGHT TO 90 Deg, FLARED, LIGHTWEIGHT
- AS-156 - HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DegF, 45 Deg TO 45 Deg, FLARED, LIGHTWEIGHT
- AS-157 - HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DegF, 45 Deg TO 90 Deg, FLARED, LIGHTWEIGHT
- AS-158 - HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DegF, 90 Deg TO 90 Deg, FLARED, LIGHTWEIGHT
- AS-1633 - Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, Straight to Straight (STABILIZED May 2017)
- AS-1634 - HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 45 Deg (STABILIZED May 2017)
- AS-1635 - Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, Straight to 90 Deg
- AS-1636 - Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 45 Deg to 45 Deg (STABILIZED May 2017)
- AS-1637 - Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 45 Deg to 90 Deg (STABILIZED May 2017)
- AS-1638 - HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 90 Deg TO 90 Deg (STABILIZED May 2017)
- AS-1863 - Hose Assembly, Rubber, Flareless, Field Attachable Fitting,Straight To Straight
- AS-1864 - Hose Assembly, Rubber, Flareless, Field Attachable Fitting,Straight To 45 Degrees
- AS-1865 - Hose Assembly, Rubber, Flareless, Field Attachable Fitting,Straight To 90 Degrees
- AS-1866 - Hose Assembly, Rubber, Flareless, Field Attachable Fitting,45 Degrees To 45 Degrees
- AS-1867 - Hose Assembly, Rubber, Flareless, Field Attachable Fitting,45 Degrees To 45 Degrees
- AS-1868 - Hose Assembly, Rubber, Flareless, Field Attachable Fitting,90 Degrees To 90 Degrees
- AS-1909 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Lightweight, Beam Seal, Straight to Straight
- AS-1910 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Lightweight, Beam Seal, Straight to 45 Deg
- AS-1911 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Lightweight, Beam Seal, Straight to 90 Deg
- AS-1912 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Lightweight, Beam Seal, 45° to 45°
- AS-1913 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Lightweight, Beam Seal, 45° to 90°
- AS-1914 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Lightweight, Beam Seal, 90° to 90°
- AS-2078 - Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
- AS-38386 - Duct Assembly, Ground, Conditioned Air, Insulated, Flexible
- AS-4006 - Hose Assembly, Polytetrafluoroethylene, Ptfe, Metal Braid, Medium Pressure, Beam Seal, Str
- AS-4007 - Hose Assembly, Polytetrafluoroethylene, PTFE, Metal Braid, Medium Pressure, Beam Seal, Straight to 45 Deg (STABILIZED Apr 2017)
- AS-4008 - Hose Assembly, Polytetrafluoroethylene, PTFE, Metal Braid, Medium Pressure Beam Seal, Straight to 90 Deg (STABILIZED Apr 2017)
- AS-4009 - Hose Assembly, Polytetrafluoroethylene, PTFE, Metal Braid, Medium Pressure, Beam Seal, 45 Deg to 45 Deg (STABILIZED Apr 2017)
- AS-4010 - Hose Assembly, Polytetrafluoroethylene, PTFE, Metal Braid, Medium Pressure, Beam Seal, 45 Deg to 90 Deg (STABILIZED Apr 2017)
- AS-4352 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Heavyweight, Beam Seal, Straight to Straight
- AS-4353 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Heavyweight, Beam Seal, Straight to 45 Deg
- AS-4354 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Heavyweight, Beam Seal, Straight to 90 Deg
- AS-4355 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Heavyweight, Beam Seal, 45 Deg to 45 Deg
- AS-4356 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Heavyweight, Beam Seal, 45 Deg to 90 Deg
- AS-4357 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Deg F, 3000 psi, Heavyweight, Beam Seal, 90 Deg to 90 Deg
- AS-4469 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to Straight
- AS-4470 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to 45 Deg
- AS-4471 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to 90 Deg
- AS-4472 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, 45 Deg to 45 Deg
- AS-4473 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, 45 Deg to 90 Deg
- AS-4474 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, 90 Deg to 90 Deg
- AS-4475 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to Straight Female
- AS-4476 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to 45 Deg Female
- AS-4477 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to 90 Deg Female
- AS-4478 - Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to Straight Male
- AS-4568 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4569 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4570 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4571 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4572 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4573 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4574 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4575 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4576 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4577 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4578 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275°F, Titanium Fittings, Beam Seal, 45° to 90°
- AS-4579 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,3000 Psi, 275 Degrees F, Tita
- AS-4580 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,4000 Psi, 275 Degree F, Titan
- AS-4581 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,4000 Psi, 275 Degree F, Titan
- AS-4582 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Flareless, Straight to 90 Deg
- AS-4583 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Flareless, 45 Deg to 90 Deg
- AS-4584 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Flareless, 45 Deg to 45 Deg
- AS-4585 - Hose Assembly, Ptfe, Para-Aramid Reinforced, Standard Duty,4000 Psi, 275 Degree F, Titan
- AS-4586 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Beam Seal, Straight to Straight
- AS-4587 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 DEG F, Titanium Fittings, Beam Seal, Straight to 45 Deg
- AS-4588 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Beam Seal, Straight to 90 Deg
- AS-4589 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Beam Seal, 45 Deg to 45 Deg
- AS-4590 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Beam Seal, 45 Deg to 90 Deg
- AS-4591 - Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 Deg F, Titanium Fittings, Beam Seal, 90 Deg to 90 Deg
- AS-4624 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F,
- AS-4625 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F,
- AS-4626 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F,
- AS-4627 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F,
- AS-4628 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F,
- AS-4642 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees, 4000 Psi, Flared, Straight to Straight, Cres Fittings
- AS-4643 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 4000 Psi, Flared Straight to 45 Degrees, Cres Fittings
- AS-4644 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 4000 Psi, Flared, Straight to 90 Degrees, Cres Fittings
- AS-4645 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforce, 400 Degrees F, 4000 Psi, Flared, 45 Degrees to 45 Degrees, Cres Fittings
- AS-4646 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 4000 Psi, Flared, 45 Degrees to 90 Degrees, Cres Fittings
- AS-4647 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 4000 Psi, Flared, 90 Degrees to 90 Degrees, Cres Fittings
- AS-4689 - Fitting, Tee, Reducer, Bulkhead on Run, Flareless and Short Flareless
- AS-4690 - Fitting, Tee, Reducer, Bulkhead on Side, Flareless and Short Flareless
- AS-4704 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Mal
- AS-4705 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Mal
- AS-4706 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Mal
- AS-4774 - Hose, Air Duct, Flexible, Silicone-Coated Fabric, 1 Psi, External Nylon Helix, Self-Exting
- AS-4796 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Fem
- AS-4797 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Fem
- AS-4798 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Fem
- AS-4799 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Fem
- AS-4800 - Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 45 Deg Female
- AS-4801 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling Potable Water, Straight FEMA
- AS-4802 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Mal
- AS-4803 - Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Mal
- AS-5421 - Hose Assembly, Lined Silicone, Heated, Flareless, 125 Psi, Potable Water
- AS-5422 - Hose Assembly, Lined Silicone, Heated, Fixed Cavity, 125 Psi, Potable Water
- AS-5423 - Hose Assembly, Lined Silicone, Heated, Flareless To Fixed Cavity, 125 Psi, Potable Water
- AS-5458 - Hose Assembly, Metal - Medium Pressure, Flared, Welded, Straight To Straight
- AS-5459 - Hose Assembly, Metal - Medium Pressure, Flared, Welded, Straight To 45 Degree
- AS-5460 - Hose Assembly, Metal - Medium Pressure, Flared, Welded, Straight To 90 Degree
- AS-5461 - Hose Assembly, Metal - Medium Pressure, Flared, Welded, 45 Degree To 45 Degree
- AS-5462 - Hose Assembly, Metal - Medium Pressure, Flared, Welded, 45 Degree To 90 Degree
- AS-5463 - Hose Assembly, Metal - Medium Pressure, Flared, Welded, 90 Degree To 90 Degree
- AS-5503 - Hose Assembly, Lined Silicone, 125 psi, Flareless to Fixed Cavity, Potable Water
- AS-5961 - Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to Straight
- AS-5962 - Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to 45° Elbow
- AS-5963 - Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to 90° Elbow
- AS-5964 - Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, 45° Elbow to 45° Elbow
- AS-5965 - Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, 45° Elbow to 90° Elbow
- AS-5966 - Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, 90° Elbow to 90° Elbow
- AS-621 - Hose Assembly, 3000 psi, PTFE, Flareless, Straight to Straight, Heavyweight
- AS-622 - Hose Assembly, 3000 psi, PTFE, Flareless, Straight to 45 Deg, Heavyweight
- AS-623 - Hose Assembly, 3000 psi, PTFE, Flareless, Straight to 90 Deg, Heavyweight
- AS-624 - Hose Assembly, 3000 psi, PTFE, Flareless 45 Deg to 45 Deg, Heavyweight
- AS-625 - Hose Assembly, 3000 psi, PTFE, Flareless, 45 Deg to 90 Deg, Heavyweight
- AS-626 - Hose Assembly, 3000 psi, PTFE, Flareless, 90 Deg to 90 Deg, Heavyweight
- AS-627 - Hose Assembly, 3000 psi, PTFE, Flared, Straight to Straight, Heavyweight
- AS-628 - Hose Assembly, 3000 psi, PTFE, Flared, Straight to 45 Deg, Heavyweight
- AS-629 - Hose Assembly, 3000 psi, PTFE, Flared, Straight to 90 Deg, Heavyweight
- AS-630 - Hose Assembly, 3000 psi, PTFE, Flared, 45 Deg to 45 Deg, Heavyweight
- AS-631 - Hose Assembly, 3000 psi, PTFE, Flared, 45 Deg to 90 Deg, Heavyweight
- AS-632 - Hose Assembly, 3000 psi, PTFE, Flared, 90 Deg to 90 Deg, Heavyweight
- AS-639 - Hose, Polytetrafluoroethylene, Metal Braid, Medium Pressure,Hydraulic, 450 Degrees F
- AS-6399 - Hose, Rubber, Wire-Wound, Synthetic, Ice-Eliminating System
- AS-647 - Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to Straight
- AS-648 - Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 45 Degree
- AS-649 - Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 90 Degree
- AS-650 - Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45 Degree to 45 Degree
- AS-651 - Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45 Degree to 90 Degree
- AS-652 - Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 90 Degree to 90 Degree
- AS-8796 - Hose, Air Duct, Flexible, Aircraft
- DSCC-07006 - Hose Assembly, Rear Wheel, Valve to Turret
- DSCC-08002 - Hose Assembly, Abrasion Guards, Protective Coils, & Sleeves
- EI-1529 - Aviation Fuelling Hose and Hose Assemblies
- FED-STD-162 - Hose, Rubber, Visual Inspection Guide For
- L-H-520 - Hose and Hose Assemblies, Non-Metallic (Rubber, Plastic)
- L-T-790 - Tube, Nonmetallic; Polyvinyl Chloride (Pvc), Flexible (for Laboratory and Medical Use)
- MA-2080 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204Degrees C, 21,000 Kpa, 60-Deg
- MA-2081 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204Degrees C, 21,000 Kpa, 60-Deg
- MA-2082 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204Degrees C, 21,000 Kpa, 60-Deg
- MA-2083 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204Degrees C, 21,000 Kpa, 60-Deg
- MA-2084 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204Degrees C, 21,000 Kpa, 60-Deg
- MA-2085 - Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 Kpa, 60
- MA-2086 - Hose Assembly, Tetrafluoroethylene, 21000 Kpa, Flareless, Straight To Straight, Metric
- MA-2087 - Hose Assembly, Tetrafluoroethylene, 21000 Kpa, Flareless, Straight To 45 Degrees, Metric
- MA-2088 - Hose Assembly, Tetrafluoroethylene, 21000 Kpa, Flareless, Straight To 90 Degrees, Metric
- MA-2089 - Hose Assembly, Tetrafluoroethylene, 21000 Kpa, Flareless, 45Degrees To 45 Degrees, Metric
- MA-2090 - Hose Assembly, Tetrafluoroethylene, 21000 Kpa, Flareless, 45Degrees To 90 Degrees, Metric
- MA-2091 - Hose Assembly, Tetrafluoroethylene, 21,000 Kpa, Flareless, 90 Degrees To 90 Degrees, Metri
- MA-2100 - Hose Assemblies, Metal Medium Pressure, High Temperature, Metric
- MA-2101 - Hose Assembly, Metal, Medium Pressure Flareless, Welded, Straight To Straight, Fitting End
- MA-2102 - Hose Assembly, Metal, Medium Pressure Flareless, Welded, Straight To 45 Deg Fitting Ends,
- MA-2103 - Hose Assembly, Metal, Medium Pressure Flareless, Welded, Straight To 90 Deg Fitting Ends,
- MA-2104 - Hose Assembly, Metal, Medium Pressure Flareless, Welded, 45Degrees To 45 Degrees, Fittin
- MA-2105 - Hose Assembly, Metal, Medium Pressure Flareless, Welded, 45Degrees To 90 Degrees, Fittin
- MA-2106 - Hose Assembly, Metal, Medium Pressure Flareless, Welded, 90Degrees To 90 Degrees, Fittin
- MA-2170 - Hose Assembly, Polytetrafluoroethylene, Ptfe Cres Reinforced, 204 Degrees C, 21,000 Kpa, L
- MA-2171 - Hose Assembly, Polytetrafluoroethylene, Ptfe Cres Reinforced, 204 Degrees C, 21,000 Kpa, L
- MA-2172 - Hose Assembly, Polytetrafluoroethylene, Ptfe Cres Reinforced, 204 Degrees C, 21,000 Kpa, L
- MA-2176 - Hose Assembly, Polytetrafluoroethylene, Ptfe Cres Reinforced, 232 Degrees C, 10 500 Kpa, B
- MA-2177 - Hose Assembly, Polytetrafluoroethylene, Ptfe Cres Reinforced, 232 Degrees C, 10 500 Kpa, B
- MA-2178 - Hose Assembly, Polytetrafluoroethylene, Ptfe Cres Reinforced, 232 Degrees C, 10 500 Kpa, B
- MA-4568 - Hose Assembly, Ptfe, Aramid Reinforced Standard Duty, 21 000/28 000 Kpa, 135 Degrees C, Ti
- MA-4569 - Hose Assembly, Ptfe, Aramid Reinforced, Standard Duty, 21 000/28 000 Kpa, 135 Degrees C, T
- MA-4570 - Hose Assembly, Ptfe, Aramid Reinforced, Standard Duty, 21 000/28 000 Kpa, 135 Degrees C, T
- MA-4571 - Hose Assembly, Ptfe, Aramid Reinforced, Standard Duty, 21 000/28 000 Kpa, 135 Degrees C, T
- MA-4572 - Hose Assembly, Ptfe, Aramid Reinforced, Standard Duty, 21 000/28 000 Kpa, 135 Degrees,
- MA-4573 - Hose Assembly, Ptfe, Aramid Reinforced, Standard Duty, 21 000/28 000 Kpa, 135 Degrees C, T
- MA-4626 - Hose Assembly, Ptfe, Para Aramid Reinforced, Heavy-Duty, 21000 Kpa, 135 Degrees C, Flarel
- MA-4627 - Hose Assembly, Ptfe, Para Aramid Reinforced, Heavy-Duty, 21000 Kpa, 135 Degrees C, Flarel
- MA-4628 - Hose Assembly, Ptfe, Para Aramid Reinforced, Heavy-Duty, 21000 Kpa, 135 Degrees C, Flarel
- MA-4629 - Hose Assembly, Ptfe, Para Aramid Reinforced, Heavy-Duty, 21000 Kpa, 135 Degrees C, Flarel
- MA-5066 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 Kpa, 135 Degrees C,
- MA-5067 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 Kpa, 135 Degrees C,
- MA-5068 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 Kpa, 135 Degrees C,
- MA-5069 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 Kpa, 135 Degrees C,
- MA-5070 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 Kpa, 135 Deg C, Bea
- MA-5071 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 Kpa, 135 Degrees, B
- MA-5073 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 Kpa, 135 Degrees C,
- MA-5074 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 Kpa, 135 Degrees C,
- MA-5075 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 Kpa, 135 Degrees C,
- MA-5076 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 Kpa, 135 Degrees C,
- MA-5077 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 Kpa, 135 Degrees C,
- MA-5078 - Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 Kpa, 135 Degrees C,
- MIL-A-5878 - Adapter, Pressure Fuel Servicing, Types A-1 & A-6 (Use MIL-A-25896)
- MIL-C-83291 - Cover, Self-Sealing, Fuel Line, Aircraft (No Superseding Document)
- MIL-C-83796/1 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attatchable End Fittings, F
- MIL-C-83796/2 - Hose Assembly, Rubber, Lightweight, Medium, Pressure, Field Attachable End Fittings, F
- MIL-C-83796/3 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attchable End Fittings, Fla
- MIL-C-83796/4 - Hose Assembly, Rubber, Lightweigt, Medium Pressure, Field Attachable End Fittings, Fla
- MIL-C-83796/5 - Hose Assembly, Rubber, Lighweight, Medium Pressure, Feildattachable End Fittings, Flar
- MIL-C-83796/6 - Hose Assembly, Rubber, Lightweight, Medium Pressure Field Attachable End Fittings, Fla
- MIL-C-83796/7 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-C-83796/8 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-C-83796/9 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-D-22706 - Duct & Scuff Cover, Pneumatic, Flexible
- MIL-D-26124 - Duct and Duct Assembly, Pneumatic, Flexible (Superseded by MIL-D-22706)
- MIL-D-2690 - Doors, Curtain, Rolling, Steel, Pilasters, and Their Operating Equipment
- MIL-D-38386 - Duct Assembly, Ground, Conditioned Air, Insulated, Flexible (Superseded by SAE as-38386)
- MIL-D-43792 - Duct, Exhaust (Must) (No Superseding Document)
- MIL-DTL-13444 - Hose And Hose Assemblies, Rubber: Fuel And Oil
- MIL-DTL-13444/1 - Hose Assembly, Nonmetallic: Fuel and Oil, Medium Pressure, Flared Tube (Superseded by MS-52103)
- MIL-DTL-13444/2 - Hose Assembly, Rubber: Fuel and Oil, Low Pressure, Flared Tube (Superseded by MS-52104)
- MIL-DTL-13531 - Hose And Hose Assembly, Rubber (Hydraulic, Pneumatic, Flexible)
- MIL-DTL-13531/1 - Hose Assembly, Nonmetallic: Hydraulic and Pneumatic, Medium Pressure, Flared Tube (Superseded by MS-500077)
- MIL-DTL-13531/2 - Hose Assembly, Nonmetallic: Hydraulic and Pneumatic, High Pressure, Flared Tube (Superseded by MS-500083)
- MIL-DTL-17505 - Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge
- MIL-DTL-17902 - Hose, End Fittings and Hose Assemblies, Synthetic Rubber, Aircraft Fuels
- MIL-DTL-20176 - Hose and Hose Assembly, Rubber, Smooth Bore, Light-Weight Sewage Discharge and Oily Waste Discharge
- MIL-DTL-22240 - Hoses, Rubber, Petroleum-Based Fuels and Water Services, Discharge-Only, Smooth Bore, Lightweight Buoyant Type
- MIL-DTL-22706 - Duct and Scuff Cover, Pneumatic, Flexible
- MIL-DTL-24136 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, for Flexible Hose Assemblies, General Specification for
- MIL-DTL-24136/1 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, for Flexible Hose Assemblies (Low Pressure, Sizes -80 Through -192)
- MIL-DTL-24136/2 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, for Flexible Hose Assemblies (High Pressure, Sizes -4 through -32)
- MIL-DTL-24136/4 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, for Flexible Hose Assemblies (Low Pressure, Sizes -40, -48 and -64)
- MIL-DTL-25579 - Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for
- MIL-DTL-26499 - Hose Assembly, Metal, Flexible, Breathing Oxygen
- MIL-DTL-26521 - Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings
- MIL-DTL-26633 - Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen
- MIL-DTL-26666 - Hose Assembly, Pneumatic, High Pressure
- MIL-DTL-26894 - Hose and Hose Assembly, Rubber, Gasoline, Refueling, Low Temperature
- MIL-DTL-27267 - Hose, Cres Wire Reinforced, Polytetrafluoroethylene, 450 Degrees F, Medium Pressure
- MIL-DTL-27516 - Hose and Hose Assembly, Nonmetallic, Suction and Discharge
- MIL-DTL-28693 - Hose, Rubber, Oil and Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinally Reinforced, 6 Inch
- MIL-DTL-29210 - Hose Assembly, Rubber, Metal Lined, Wire Reinforced, 250 PSIG, Saturated Steam Service
- MIL-DTL-29210/1 - Hose Assembly, Iron, Brass, and CRES Connectors, Rubber, Metal Lined, Wire Reinforced .750 and 1.00 Inch Hose, 250 PSIG, Saturated Steam Service
- MIL-DTL-29210/2 - Hose Assembly, Iron, Brass, and CRES Connectors, Rubber, Metal Lined, Wire Reinforced, 1.250, 1.500, and 2.000 Inch Hose, 250 PSIG, Saturated Steam Service
- MIL-DTL-29210/3 - Hose Assembly, Male Crimp Connectors, Rubber, Wire Reinforced, .750 and 1.00 Inch Hose, 250 PSIG, Saturated Steam Service
- MIL-DTL-29210/4 - Hose Assembly, Male Crimp Connectors, Rubber, Wire Reinforced, 1.250, 1.500, and 2.000 Inch Hose, 250 Psig, Saturated Steam Service
- MIL-DTL-29210/6 - Hose Assembly, Male and Female Wing, Crimp Connectors, Rubber, Wire Reinforced, 1.250, 1.500, and 2.000 Inch Hose, 250 PSIG, Saturated Steam Service
- MIL-DTL-29210/7 - Hose Assembly, Male, and Female Swivel Nut, Crimp Connectors, Rubber, Wire Reinforced, .750 and 1.00 Inch Hose, 250 PSIG, Saturated Steam Service
- MIL-DTL-29210/8 - Hose Assembly, Male and Female Swivel Nut, Crimp Connectors, Rubber, Wire Reinforced, 1.250, 1.500, and 2.000 Inch Hose, 250 PSIG, Saturated Steam Service
- MIL-DTL-32330 - Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut
- MIL-DTL-32330/1 - Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flared, Tube to Hose with Swivel Nut
- MIL-DTL-32330/2 - Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flareless, Tube to Hose with Swivel Nut
- MIL-DTL-32434 - Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for
- MIL-DTL-32434/1 - Hose, Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-to Flare
- MIL-DTL-32434/10 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-to-Flange
- MIL-DTL-32434/2 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
- MIL-DTL-32434/3 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange
- MIL-DTL-32434/4 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flange
- MIL-DTL-32434/5 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flange-to-Flange
- MIL-DTL-32434/6 - Hose Assembly, Polytetrafluorethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flare
- MIL-DTL-32434/7 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
- MIL-DTL-32434/8 - Hose, Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flange
- MIL-DTL-32434/9 - Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flange
- MIL-DTL-32435 - Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure
- MIL-DTL-3992 - Hose and Hose Assembly, Rubber, Air and Vacuum Brake, Systems
- MIL-DTL-52471 - Hose and Hose Assemblies, Rubber, Hydraulic Pressure Type, General Specification for
- MIL-DTL-52471/1 - Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 1001R1, Single-Wire Braided Reinforcement Hose
- MIL-DTL-52471/10 - Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose
- MIL-DTL-52471/2 - Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100R2, Double-Wire Braided Reinforcement Hose
- MIL-DTL-52471/3 - Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100RE, Four Wire Braided Reinforcement or Multiple Wire Braided Steel Wire Reinforced Hose
- MIL-DTL-52471/4 - Hose, Rubber, Hydraulic Pressure-Type, Type 100R1 Single-Wire-Braided Reinforcement Hose
- MIL-DTL-52471/5 - Hose, Rubber, Hydraulic Pressure-Type, Type 100R2 Double-Wire-Braided Reinforcement Hose
- MIL-DTL-52471/7 - Hose, Rubber, Hydraulic Pressure-Type, Type 100RE Four-Spiral-Wrap Reinforcement Hose
- MIL-DTL-52471/8 - Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE
- MIL-DTL-52471/9 - Hose, Rubber: Hydraulic Pressure-Type; Type 100R12 Four-Spiral-Wrap Reinforcement Hose
- MIL-DTL-5593 - Hose, Aircraft, Low Pressure Air and Vacuum, Flexible
- MIL-DTL-6000 - Hose, Rubber, Aircraft, Fuel, Oil, Coolant, Water, and Alcohol
- MIL-DTL-6615 - Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for
- MIL-DTL-81581 - HHose Assemblies, Breathing Oxygen and Air, General Specification for
- MIL-DTL-81581/1 - Hose Assemblies, Air, Low Pressure, Highly Flexible
- MIL-DTL-81581/2 - Hose Assemblies, Breathing Oxygen, High Pressure, without Connections for Communication Systems
- MIL-DTL-81581/3 - Hose Assemblies, Breathing Oxygen, High Pressure, without Connections for Communication Systems
- MIL-DTL-81581/4 - Hose Assemblies, Breathing Oxygen, Low Pressure, with/without Connections for an Integrated Communication System
- MIL-DTL-81581/5 - Hose Assemblies, Breathing Oxygen, Low Pressure, Connector to Regulator
- MIL-DTL-81581/6 - Hose Assemblies, Breathing Oxygen and Air, Hose Kits and Mated Assemblies
- MIL-DTL-81581/7 - Hose Assemblies, Combined Assemblies, Hose and Communication Cable
- MIL-DTL-81581/8 - Hose Assemblies, Cable Assemblies, Communication, Associated
- MIL-DTL-83298 - Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic
- MIL-DTL-83796 - Hose Assembly, Rubber, Lightweight, Medium Pressure, General Specification for
- MIL-DTL-83796/1 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare
- MIL-DTL-83796/10 - Hose Assembly, Rubber, Light Weight, Internal Support Coil, Medium Pressure, Field Attachable End Fittings, Flare to Flare
- MIL-DTL-83796/11 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole
- MIL-DTL-83796/12 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless
- MIL-DTL-83796/13 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole
- MIL-DTL-83796/14 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange
- MIL-DTL-83796/15 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole
- MIL-DTL-83796/16 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange
- MIL-DTL-83796/17 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole
- MIL-DTL-83796/18 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flange to Flange
- MIL-DTL-83796/2 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole
- MIL-DTL-83796/3 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless
- MIL-DTL-83796/4 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless with Lockwire Hole
- MIL-DTL-83796/5 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flange
- MIL-DTL-83796/6 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole
- MIL-DTL-83796/7 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flange
- MIL-DTL-83796/8 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole
- MIL-DTL-83796/9 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flange to Flange
- MIL-DTL-83797 - Hose, Rubber, Lightweight, Medium Pressure, General Specification for
- MIL-DTL-8788 - Hose, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +160 Degrees F
- MIL-DTL-8790 - Hose Assemblies, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +275 Degrees F, Field Attachable
- MIL-DTL-8794 - Hose, Synthetic Rubber - Hydraulic Fluid, Fuel, and Oil Resistant
- MIL-DTL-8795 - Hose Assemblies, Elastomeric, Hydraulic, Fuel, and Oil Resistant, General Specification for
- MIL-DTL-8795/1 - Hose Assembly, Reusable, Hydraulic, Fuel, and Oil Resistant, 3/16 Inch through 3 Inch Tube Sizes
- MIL-H-10868 - Hose Assembly, Rubber, Utility, Gasoline (1/4-Inch Inside Diameter) (No Superseding Document)
- MIL-H-1142 - Hose, Rubber, Cutting, and Welding, Fuel, Gases, Oxygen and Air (Use ZZ-H-461)
- MIL-H-11588 - Hose Assemblies, Rubber, Synthetic, Liquid Petroleum Fuels, Dispensing, Collapsible
- MIL-H-13247 - Hose, Gas Mask, m3
- MIL-H-13266 - Hose, Mask, Gas, Horse
- MIL-H-13444 - Hose & Hose Assemblies, Rubber: Fuel & Oil
- MIL-H-13524 - Hose Assemblies, Metal: Flexible, Fuel and Oil (Superseded by A-A-52435)
- MIL-H-13531 - Hose, Rubber & Hose Assembly, Rubber (Hydraulic, Flexible)
- MIL-H-15217 - Hose, Rubber, Sandblast (Superseded by ISO3861)
- MIL-H-17505 - Hose & Hose Assembly, Rubber, Oil & Gasoline, Suction & Discharge
- MIL-H-17666 - Hose, Metal, Corrugated Bronze, High Pressure Air Service
- MIL-H-17902 - Hose, End Fittings and Hose Assemblies, Synthetic Rubber, Aircraft Fuels
- MIL-H-18158 - Hose Ducting, Low Pressure, Naval Shipboard Portable, Ventilating Set Use
- MIL-H-18160 - Hose Assemblies, Corrugated, Steel, 200 LB/IN2 and 425 Degrees F Maximum Steam Service Rating
- MIL-H-18162 - Hose Assemblies, Air Duct, Low Pressure, Fabric, Reinforced, Retractable and Compressible Types, Shipboard Use
- MIL-H-18288 - Hose and Hose Assemblies, Aircraft, Self Sealing, Aromatic Fuel (Superseded by MIL-PRF-7061)
- MIL-H-19030 - Hose Assemblies, Rubber, Wire Reinforced, 200 Psig, Maximum Saturated Steam Service (Use MIL-H-28596)
- MIL-H-19034 - Hose, Metal, Flexible, Corrugated Carbon Steel and Corrosion Resisting Steel Types, Internal Combustion Engine Air Intake and Exhaust Applications (for Surface Vessels Only) (Superseded by A-A-59735)
- MIL-H-19091 - Hose Assemblies, Rubber, Oil and Gasoline Discharge, Smooth Bore, Light Weight, Buoyant Type, 6 Inch Size
- MIL-H-19606 - Hose and Hose Assemblies, Synthetic Rubber, Reinforced, Water-and Oil-Resistant, Medium and High Pressure, Nonmagnetic and Regular Service (Use MIL-H-24135)
- MIL-H-19639 - Hose Assemblies, Rubber, Paint Spray Equipment (Use ZZ-H-521)
- MIL-H-19992 - Hose Assemblies, Flexible (Pneumatic), High Pressure Oil Resistant (No Superseding Document)
- MIL-H-20176 - Hose & Hose Assembly, Rubber, Noncollapsible, Smooth Bore, Light Weight Sewage Dischar
- MIL-H-21291 - Hose Assemblies, Noncollapsible, for Aviation Fuels (Superseded by MIL-H-17902)
- MIL-H-21394 - Hose Assemblies, Synthetic Rubber, Aviation Fuel Discharge, Noncollapsible (Use MIL-H-22240)
- MIL-H-2217 - Hose Assemblies, Wire-Reinforced Rubber, Submarine Rescue Chamber (See Cancellation Notice for Supersession Information)
- MIL-H-22240 - Hose, Rubber, Petroleum Based Fuels & Water Services, Discharge Only, Smooth Bore, Lightweight Buoyant Type
- MIL-H-22279 - Hose Assemblies, Rubber, Aircraft Fueling Collapsible, by Negative Pressure (Refer To API 1529 and NFPA 407)
- MIL-H-22297 - Hose Assembly, Rubber, 4-Inch Id, With Quick-Acting Couplings, Adapters, and Filler Elbows (Use MIL-H-370 and MIL-C-27487)
- MIL-H-22605 - Hose, Bronze, Flexible& Mechanical & Fittings for (Superseded by A-A-50351)
- MIL-H-23564 - Hose Assemblies, Retractable, Light Weight, for Aircraft Cooling
- MIL-H-2373 - Hose, Gasoline, Slip-on Type (Army)
- MIL-H-24135 - Hose, Synthetic Rubber, Wire Reinforced for Flexible Hose Assemblies, General Specification For
- MIL-H-24135/1 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Double Wire Braid or Two-Spiral and one-Wire Braid, High Pressure Sizes -4 Through -32)
- MIL-H-24135/10 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Single or Double Wire Braid Medium Pressure, Sizes -4 Through -48)
- MIL-H-24135/11 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies, (Four Ply, Spiral Wire Wrap, Low Pressure, Sizes -80 and -96)
- MIL-H-24135/12 - Hose, Synthetic Rubber, Wire Reinforced, High Performance, for Flexible Hose Assemblies (Single Wire Braid Over Single Synthetic Fiber Braid Medium Pressure, High Temperature, Multi-Fluid, Sizes -4 Th
- MIL-H-24135/13 - Hose, Synthetic Rubber, Wire Reinforced, High Performance for Flexible Hose Assemblies (Double Wire Braid, High Pressure, High Temperature, Multi-Based Oil, Sizes -4 Through -32)
- MIL-H-24135/2 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Plies Spiral Wrapped, or Two Spiral and one-Wire Braid, High Pressure, Sizes -6 Through -16)
- MIL-H-24135/3 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Plies Spiral Wrapped, High Pressure, Sizes -16 Through -32)
- MIL-H-24135/4 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Double Wire Braid) Medium Pressure, Sizes -40, -48 and -64)
- MIL-H-24135/5 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Double Wire Braid, Perforated Cover, for High Pressure Gas, Sizes -4 Through -32)
- MIL-H-24135/6 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Double Wire Braid or Two-Spiral and one-Wire Braid, High Pressure, Sizes -4 Through -32 for Phosphate Ester Base Hydraulic Fluids
- MIL-H-24135/7 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Heavy Spiral Wrap, High Pressure, Sizes -20, -24 and -32, for Phosphate Ester Base Fluids)
- MIL-H-24135/8 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Plies, Spiral Wrapped Wire, High Pressure, Sizes -6 Through -16, for Phosphate Ester Base Fluids)
- MIL-H-24135/9 - Hose, Synthetic Rubber, Wire Reinforced, for Flexible Hose Assemblies (Four Plies, Heavy Spiral Wrapped Wire, High Pressure, Sizes -8 Through -32)
- MIL-H-24520 - Hose and Hose Assembly for Water Cooling of Electronic Equipment (No Superseding Document)
- MIL-H-24592 - Hose Assembly, Tetrafluoroethylene Tube, Noncollapsible, High Temperature
- MIL-H-24595 - Hose, Wire-Reinforced Large-Diameter With Reuseable End Fittings for Flexible Connections (Superseded by MIL-H-24135/11)
- MIL-H-25579 - Hose Assembly, Tetrafluoroethylene, High Temperature Medium Pressure, General Requirem
- MIL-H-26385 - Hose, Oxygen & Pressurization, Ozone Resistant
- MIL-H-26499 - Hose Assembly, Metal, Flexible, Breathing Oxygen
- MIL-H-26626 - Hose Assembly, Tetrafluoroethylene, Oxygen
- MIL-H-26633 - Hose Assembly, Polytetrafluoroethylene, Oxygen
- MIL-H-26666 - Hose Assembly, Pneumatic, High Pressure
- MIL-H-26686 - Hose Assembly, Tetrafluoroethylene Red and White Fuming Nitric Acid Resistant (No Superseding Document)
- MIL-H-26894 - Hose Assembly, Rubber, Gasoline, Refueling, Low Temperature
- MIL-H-2699 - Hose, Pneumatic (Braided or Wrapped) (Use ZZ-H-500)
- MIL-H-27267 - Hose Tetrafluoroethylene, High Temperature, Medium Pressure
- MIL-H-27462 - Hose Assembly, Pneumatic, High Pressure (8500 Psi)
- MIL-H-27508 - Hose Assembly, Rubber GRK-6/E32R-1 (Superseded by MIL-H-26521 Now MIL-DTL-26521)
- MIL-H-27516 - Hose & Hose Assembly, Nonmetallic, Suction & Discharge
- MIL-H-2817 - Hose, Synthetic Rubber, Wire Stiffened, Suction and Discharge, Ship S Salvage
- MIL-H-28523 - Hose Assembly, Rubber, Hydraulic and Pneumatic, Jetting (400Psi Working Pressure)
- MIL-H-28596 - Hose and Hose Assembly, Rubber, Steam (Superseded by A-A-59159)
- MIL-H-28692 - Hose, Nonmetallic, Portable Water Discharge, Smooth-Bore, Lightweight, 4 Inch, With Reattachable Couplings (No Superseding Document)
- MIL-H-28693 - Hose, Rubber, Oil & Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinal
- MIL-H-2913 - Hose, Flexible-Metallic, High-Pressure
- MIL-H-29210 - Hose Assembly, Rubber, Metal Lined, Wire Reinforced, 250 Psig, Saturated Steam Service
- MIL-H-370 - Hoses & Hose Assemblies, Nonmetallic: Elastomeric, Liquid Fuel
- MIL-H-3726 - Hose, Sulfuric Acid Resistant (Thermoplastic)
- MIL-H-38360 - Hose Assemblies, Tetrafluoroethylene, High-Temperature, High Pressure, 3000 Psi, Hydraulic and Pneumatic (Superseded by SAE as-604 and SAE as-1339)
- MIL-H-38390 - Hose Assembly, Tetrafluoroethylene, Pneumatic, High Pressure (Superseded by SAE as-38390)
- MIL-H-3992 - Hose & Hose Assembly, Rubber, Air & Vacuum Brake, Automotive
- MIL-H-4441 - Hose, Rubber, Gasoline, Lightweight (Superseded by MIL-H-27516)
- MIL-H-4443 - Hose, Rubber, Oil Suction, Wire Reinforced (Use MIL-H-4441)
- MIL-H-4450 - Hose, Rubber, Fire, Low Temperature (Use MIL-H-52072)
- MIL-H-4495 - Hose Assembly, Rubber, Aerial Refueling
- MIL-H-4722 - Hose Assembly, High Pressure, Breathing Oxygen (No Superseding Document)
- MIL-H-47305 - Hose Assembly (No Superseding Document)
- MIL-H-51059 - Hose, Fuel, Flame Thrower, m8 (No Superseding Document)
- MIL-H-52079 - Hose, Preformed, Semi Flexible, Reinforced (Superseded by A-A-52546)
- MIL-H-52262 - Hose Assembly, Elastomeric: Lightweight, Collapsible, 4-Inch
- MIL-H-52274 - Hose, Rubber, and Hose Assemblies, Rubber, Hydraulic, High-Pressure (Use MIL Specs MIL-H-52471, MIL-H-13531B and MIL-H-8794C)
- MIL-H-52471 - Hose & Hose Assemblies, Rubber, Hydraulic Pressure Type, General Specification For
- MIL-H-52471/1 - Hose Assembly, Rubber, Hydraulic Pressure Type, Type 100R1
- MIL-H-52471/10 - Hose Assemblies, Rubber: Hydraulic Pressure- Type: Type 100R12
- MIL-H-52471/2 - Hose Assemblies, Rubber, Hydraulic Pressure Type, Type 100R2
- MIL-H-52471/3 - Hose Assembly, Rubber, Hydraulic Pressure Type, Type 100R10
- MIL-H-52471/4 - Hose, Rubber, Hydraulic Pressure Type, Type 100R1 Single Wire Braid Reinforcement Hose
- MIL-H-52471/5 - Hose, Rubber, Hydraulic Pressure Type, Type 100R2 Double Wire Braid Reinforcement Hose
- MIL-H-52471/6 - Hose, Rubber, Hydraulic Pressure Type, Type 100R10 Four Spiral Wrap Reinforcement Hose
- MIL-H-52471/7 - Hose, Rubber: Hydraulic Pressure-Type: Type 100Re Four-Spiral-Wrap Reinforcement Hose
- MIL-H-52471/8 - Hose Assemblies, Rubber: Hydraulic Pressure- Type: Type 100Re
- MIL-H-52471/9 - Hose, Rubber: Hydraulic Pressure-Type: Type 100R12 Four-Spiral-Wrap Reinforcement Hose
- MIL-H-52544 - Hose, Rubber; Oil Suction, Wire-Reinforced (Superseded by A-A-52413)
- MIL-H-52555 - Hose Assembly, Rubber, Light Weight, Collapsible, 2 Inch, for Liquid Petroleum Fuels
- MIL-H-53027 - Hose Assembly, Rubber: Lightweight, Collapsible, 6-Inch; Fordrinking (Potable) Water
- MIL-H-53062 - Hose Assembly, Rubber, Lightweight, Collapsible 6 Inch for Pol Service (Superseded by MIL-H-0053073)
- MIL-H-53063 - Hose Assembly, Elastomer Lightweight Noncollapsible, Fuel (Superseded by MIL-PRF-53063, 1996
- MIL-H-53064 - Hose Assembly, Elastomer: Lightweight, Collapsible; Liquid Fuel (Superseded by: MIL-PRF-53064
- MIL-H-53073 - Hose Assembly, Elastomeric: Fuel Discharge, Collapsible, Lightweight (Superseded by MIL-PRF-370)
- MIL-H-53095 - Hose Assemblies, Rubber, Synthetic, Liquid Petroleum Fuels, Dispensing, Collapsible, L
- MIL-H-53096 - Hoses and Hose Assemblies, Elastomer: Rubber, Liquid Fuel, Noncollapsible, Low Temperature (No Superseding Document)
- MIL-H-5593 - Hose, Aircraft, Low-Pressure, Flexible
- MIL-H-6000 - Hose, Rubber (Fuel, 0Il, C00Lant, Water and Alcohol)
- MIL-H-62028 - Hose, Air Duct, High Temperature, Flexible, Reinforced
- MIL-H-62165 - Hose and Hose Assembly, Thermoplastic, Hydraulic, Flexible (No Superseding Document)
- MIL-H-62165/1 - Hose Assembly, Non Metallic, Thermoplastic, Hydraulic, Flexible (No Superseding Document)
- MIL-H-62165/2 - Hose, Non Metallic, Thermoplastic, Hydraulic, Flexible (No Superseding Document)
- MIL-H-62217 - Hose and Hose Assemblies, Non-Metallic, Silicone, Polyester and Wire Reinforced (for Coolant and Heating Systems of Diesel and Gasoline Powered Engines) (Superseded by A-A-52426)
- MIL-H-62217/1 - Hose, Nonmetallic Straight, Silicone, Polyester Reinforced (Radiator and Heater) (Superseded by A-A-52426)
- MIL-H-62217/2 - Hose, Preformed, Silicone, Polyester Reinforced (Radiator) (Superseded by A-A-52426)
- MIL-H-62217/3 - Hose, Preformed: Flexible, Silicone, Polyester and Wire Reinforced (Radiator) (Superseded by A-A-52426)
- MIL-H-62217/4 - Hose, Straight, Silicone, Polyester Reinforced, (Sealed Heater Systems) (Superseded by A-A-52426)
- MIL-H-6399 - Hose, Rubber, Wire-Wound, Synthetic, Ice Eliminating System (Superseded by SAE-as6399)
- MIL-H-6439 - Hose, Rubber, Aircraft Paint Finish Remover (Superseded by SAE-as6439)
- MIL-H-6615 - Hose Assemblies, Rubber, Fuel & Water, With Reattachable Couplings, Low Temperature
- MIL-H-7061 - Hose, Elastomeric, Aircraft, Self-Sealing, Aromatic Fuel
- MIL-H-7365 - Hose, Air Duct, for Ground Heaters (Superseded by SAE-as7365)
- MIL-H-7518 - Hose, Fuel Jettison (Supersedes 20&123)
- MIL-H-7938 - Hose, Rubber, Flame-Resistant (No Superseding Document)
- MIL-H-81581/1 - Hose Assemblies, Air, Low Pressure, Highly Flexible
- MIL-H-81581/2 - Hose Assemblies, Breathing Oxygen, High Pressure With Connections for an Integrated Co
- MIL-H-81581/5 - Hose Assemblies, Breathing Oxygen, Low Pressure Connector To Regulator
- MIL-H-81581/6 - Hose Assemblies, Breathing Oxygen & Air: Hose Kits & Mated Assemblies
- MIL-H-82127 - Hose Assembly, Rubber (Synthetic), Fuel, Discharge, Collapsible
- MIL-H-83298 - Hose, Tetrafluoroethylene, High Temperature, High Pressure (3000 Psi), Hydraulic and P
- MIL-H-83373 - Hose Assembly, Fluoroelastomer Tube, With Reattachable Couplings for JP-7 Service (No Superseding Document)
- MIL-H-83772 - Hose Assembly, Metal, Cryogenic Liquid, Aircraft Servicing
- MIL-H-83796 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Generalspecification For
- MIL-H-83796/1 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/2 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/3 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/4 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/5 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/6 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/7 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/8 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83796/9 - Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Fl
- MIL-H-83797 - Hose, Rubber, Lightweight, Medium Pressure, General Specification For
- MIL-H-83797/1 - Hose, Rubber, Lightweight, Medium Pressure, Fuel and Oil Resistant (Superseded by MIL-H-83797)
- MIL-H-85800 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 and 8000 Psi, General Specification For
- MIL-H-85800/2 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 and 8000 Psi, Design Standard for Style Straight To 45 Degrees
- MIL-H-85800/3 - Hose Assemblies, Polytetrafloureothylene, Aramid Fiber Reinforced,5000 and 8000 Psi, Design Standard for Style Straight To 90 Degree Straight To 45 Degrees
- MIL-H-85800/4 - Hose Asseblies, Polytetrafluoroethylene, Aramid Fiber Reinforced, 5000 and 8000 Psi, Design Standard for Style 45 Degreed To 45 Degrees
- MIL-H-85800/5 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced,5000 and 8000 Psi, Design Standard for Style 45 Degrees To 90 Degrees
- MIL-H-85800/6 - Hose Assemblies, Polytetrafluoroethylene, Aramid Fiber Reinforced,5000 and 8000 Ps1, Design Standard for Style 90 Degrees To 90 Degrees
- MIL-H-8788 - Hose, Hydraulic, High Pressure
- MIL-H-8790 - Hose Assembly, Rubber, Hydraulic, High Pressure (3,000 Psi)
- MIL-H-8794 - Hose, Rubber, Hydraulic, Fuel & Oil Resistant
- MIL-H-8795 - Hose Assemblies, Rubber, Hydraulic, Fuel & Oil Resistant
- MIL-H-87961 - Hose and Hose Assemblies, Air Duct, Air Breathing, Oxygen System, General Specificatio
- MIL-H-87961/1 - Hose, Air Duct, Air Breathing, Type I (Superseded by MIL-PRF-87961)
- MIL-H-87961/2 - Hose Assembly, Air Duct, Air Breathing, Type Ii (Superseded by MIL-PRF-87961)
- MIL-H-87961/3 - Hose Assembly, Air Duct, Air Breathing, Type Iii (Superseded by MIL-PRF-87961)
- MIL-H-899 - Hose, Low Pressure, Fabric, Wire-Stiffened, Retractable
- MIL-M-6002 - Marking; Standard Hose, Aircraft (Superseded by SAE-Arp6002)
- MIL-P-20630 - Packaging and Packing for Overseas Shipment of Winterization Kits for Engineer Equipment.
- MIL-PRF-11588 - Hose Assemblies, Rubber, Synthetic, Liquid Petroleum Fuels, Dispensing, Collapsible, Standard and Low Temperature
- MIL-PRF-26385 - Hose, Oxygen and Pressurization, Ozone Resistant
- MIL-PRF-26626 - Hose Assembly, Reinforced, Cryogenic, Oxygen
- MIL-PRF-28523 - Hose Assembly, Rubber, Hydraulic and Pneumatic, Jetting (400 PSI Working Pressure) (No Superseding Document)
- MIL-PRF-32107 - Hose, Air Duct, General Specification for
- MIL-PRF-32107/1 - Hose, Air Duct Straight, Round
- MIL-PRF-32107/10 - Hose, Air Duct Tee, Left Orientation, Half-Round
- MIL-PRF-32107/11 - Hose, Air Duct Tee, Top Opening, Half-Round
- MIL-PRF-32107/12 - Hose, Air Duct Cap, Round
- MIL-PRF-32107/13 - Hose, Air Duct Cap, Half-Round
- MIL-PRF-32107/14 - Hose, Air Duct Cross, Round
- MIL-PRF-32107/15 - Hose, Air Duct Cross, Half-Round
- MIL-PRF-32107/16 - Hose, Air Duct Reducer, Round
- MIL-PRF-32107/17 - Hose, Air Duct Reducer, Half-Round
- MIL-PRF-32107/18 - Hose, Air Duct Adapter, Round
- MIL-PRF-32107/19 - Hose, Air Duct Static Regain Device, Round
- MIL-PRF-32107/2 - Hose, Air Duct Straight, Half-Round
- MIL-PRF-32107/20 - Hose, Air Duct Static Regain Device, Half-Round
- MIL-PRF-32107/3 - Hose, Air Duct Elbow, Round
- MIL-PRF-32107/4 - Hose, Air Duct Elbow, Half-Round
- MIL-PRF-32107/5 - Hose, Air Duct Tee, Center Orientation, Round
- MIL-PRF-32107/6 - Hose, Air Duct Tee, Right Orientation, Round
- MIL-PRF-32107/7 - Hose, Air Duct Tee, Left Orientation, Round
- MIL-PRF-32107/8 - Hose, Air Duct Tee, Center Orientation, Half-Round
- MIL-PRF-32107/9 - Hose, Air Duct Tee, Right Orientation, Half-Round
- MIL-PRF-32306 - Hose Assembly, Preformed Flexible, Vibration and Motion Isolation
- MIL-PRF-32616 - Hose Assembly, Air Duct – Generation 2 Heater Ducts
- MIL-PRF-370 - Hose and Hose Assemblies, Nonmetallic: Elastomeric, Liquid Fuel
- MIL-PRF-53027 - Hose Assembly, Rubber: Lightweight Collapsible, 6-Inch: for Drinking (Potable) Water
- MIL-PRF-53063 - Hose Assembly, Elastomer, Lightweight, Noncollapsible, Fuel (Metric)
- MIL-PRF-53064 - Hose Assembly, Elastomer: Lightweight, Collapsible; Liquid Fuel
- MIL-PRF-53095 - Hose Assemblies, Rubber, Synthetic, Liquid Petroleum Fuels, Dispensing, Collapsible, Low Temperature
- MIL-PRF-62028 - Hose, Air Duct: High-Temperature Flexible, Reinforced
- MIL-PRF-6855/1 - Rubber, Synthetic, Sheets
- MIL-PRF-6855/2 - Rubber, Synthetic, Strip (or Tape)
- MIL-PRF-6855/4 - Rubber, Synthetic, Tubing
- MIL-PRF-6855/5 - Rubber, Synthetic, Channel, Extruded
- MIL-PRF-7061 - Hose, Elastomeric, Aircraft, Self-Sealing, Aromatic Fuel
- MIL-PRF-83772 - Hose, Assembly, Cryogenic Liquid, Aircraft Servicing
- MIL-PRF-87961 - Hose and Hose Assemblies, Air Duct, Air Breathing, Oxygen System
- MIL-R-11084 - Rack, Hose, Fire, Hump Type, Wall, With 11/2-Inch Valve, Capacity 100 Feet 11/2-Inch Hose.
- MIL-R-6855/1 - Rubber, Synthetic, Sheets
- MIL-R-6855/2 - Rubber, Synthetic, Strip (or Tape)
- MIL-R-6855/3 - Rubber, Synthetic, Rods (or Rounds) (No Superseding Document)
- MIL-R-6855/4 - Rubber, Synthetic, Tubing
- MIL-R-6855/5 - Rubber, Synthetic, Channel, Extruded
- MIL-R-6855/6 - Rubber, Synthetic, Special Shape, Extruded (No Superseding Document)
- MIL-R-6855/COMPLETE - Complete Set of Slash Sheets for MIL-R-6855 04/27/89
- MIL-S-52229 - Siphon, Water (Civil Defense)
- MIL-STD-166 - Visual Inspection Guide for Rubber Hose (Use Fed-STD 162)
- MIL-T-17379 - Tubing, Aluminum Bronze, Seamless and Welded
- MIL-T-20141 - Tubing, Steel (Rail Carbon) Structural (Use QQ-T-830)
- MIL-T-20160 - Tubing, Steel, Seamless or Welded (Use WW-P-404)
- MIL-T-20162 - Tubing, Steel, Welded (Including Resistance Welded) for Oil, Steam, or Water (Use Fed Spec WW-P-404)
- MIL-T-20537 - Tubing, Rubber (Synthetic)
- MIL-T-25458 - Tubing, Rubber, Silicone, for Inflight Feeding (No Superseding Document)
- MIL-T-2914 - Tubing, Steel, Seamless, Diesel-Engine-Fuel-Injection
- MIL-T-36966 - Tubing, Nonmetallic, Rubber (Superseded by A-A-53848)
- MIL-T-47046 - Tubing, Rubber, Urethane, High Strength and Abrasion Resistant (No Superseding Document)
- MIL-T-62410 - Tube Assembly Metal, Swaged Hydraulic, (m1 Tank)
- MIL-T-7880 - Tubing, Flexible, Corrosion-Resistant and Heat-Resistant Steel (Superseded by WW-H-1053)
- MS-18036 - Hose Assembly, Detachable End Fitting, Medium Pressure (Superseded by ms-28741)
- MS-21365 - Hose, Rubber, Fuel, Collapsible Low Temperature (Superseded by MIL-H-26521 Now MIL-DTL-26521)
- MS-21366 - Hose Assembly, Rubber, Fuel, Collapsible, Low Temperature, With Reattachable Couplings (Superseded by MIL-H-26521, Now MIL-DTL-26521)
- MS-22030 - Hose Assemblies, Oxygen, High Pressure (No Superseding Document)
- MS-24548 - Hose Assembly, Tetrafluoroethylene, Oxygen
- MS-27363 - Hose Assembly Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I) Flared (Superseded by SAE as-153 and SAE as-627)
- MS-27364 - Hose Assembly, Tetrafluoroethylene, Hydraulic, (3000 P.S.I.) Straight To Elbow 45 Degrees, Flared(Superseded by SAE as-154 and SAE as-628)
- MS-27365 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.) Straight To Elbow 90 Degrees, Flared (Superseded by SAE as-155 and SAE as-629)
- MS-27366 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Elbow 45 Degrees To Elbow 45 Degrees Flared (Superseded by SAE as-156 and SAE as-630)
- MS-27367 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Elbow 45 Degrees To Elbow 90 Degrees Flared (Superseded by SAE as-157 and SAE as-631)
- MS-27368 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.) Elbow 90 Degrees To Elbow 90 Degrees Flared (Superseded by SAE as-158 and SAE as-632)
- MS-27369 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I) Flareless (Superseded by SAE as-115 and SAE as-621)
- MS-27370 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Straight To Elbow 45 Degrees, Flareless (Superseded by SAE as-116 and SAE as-622)
- MS-27371 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Straight To Elbow 90 Degrees Flareless (Superseded by SAE as-117 and SAE as-623)
- MS-27372 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Elbow 45 Deg. To Elbow 45 Deg., Flareless (Superseded by SAE as-118, SAE as-624)
- MS-27373 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Elbow 45 Deg. To Elbow 90 Deg., Flareless (Superseded by SAE as-119, SAE as-625)
- MS-27374 - Hose Assembly, Tetrafluoroethylene, Hydraulic and Pneumatic, (3000 P.S.I.), Elbow 90Degrees To Elbow 90 Degrees, Flareless (Superseded by SAE as-120 and SAE as-626)
- MS-27797 - Hose, Oxygen and Pressurization Ozone Resistant
- MS-28741 - Hose Assembly, Detachable End Fitting, Medium Pressure
- MS-28751 - Hose Assembly, Hydraulic and Pneumatic High Pressure, 3000 Psi, Swivel Flareless Connections (Superseded by ms-28762)
- MS-28759 - Hose Assembly, Rubber, Hydraulic, 3,000 PSI, Straight to Straight, Flared Tube Field Attachable
- MS-28762 - Hose Assembly, Rubber, Hydraulic, 3000 PSI, Straight to Straight, Flareless Tube Field Attachable
- MS-28920 - Hose Assembly, Rubber, Hydraulic, 3000 PSI, Straight to Elbow 45 Degrees, Flared Tube Field Attachable
- MS-28921 - Hose Assembly, Rubber, Hydraulic, 3,000 PSI, Straight to Elbow 90 Degrees, Flared Tube
- MS-28922 - Hose Assembly Rubber, Hydraulic, (3,000 Psi), Elbow 45 Deg To Elbow 45 Deg.Flared Tube (No Superseding Document)
- MS-28923 - Hose Assembly Rubber, Hydraulic, (3,000 Psi), Elbow 45 Deg. To Elbow 90 Deg., Flared Tube (No Superseding Document)
- MS-28924 - Hose Assembly, Rubber, Hydraulic, 3,000 PSI, Elbow 90 Degrees to Elbow 90 Degrees, Flared Tube
- MS-33620 - Chart, Hose Selection (Superseded by SAE Air-797)
- MS-33790 - Bend Data, Minimum, Hydraulic, Pneumatic, Fuel and Oil Hose (No Superseding Document)
- MS-39261 - Hose, Rubber, Hydraulic, Pressure Type, Nominal Sizes and Maximum Working Pressures (for Engineer Equipment)
- MS-39262 - Hose, Rubber, Hydraulic, Pressure Type, Single Wire Braid Reinforcement (Superseded by MIL-H-52471/4, Now MIL-DTL-52471/4)
- MS-39263 - Hose, Rubber, Hydraulic, Pressure Type, Double Wire Braid Reinforcement (Superseded by MIL-H-52471/5, Now MIL-DTL-52471/5)
- MS-39264 - Hose, Rubber, Hydraulic, Pressure Type, Four Spiral Wrap Reinforcement (Superseded by MIL-H-52471/6)
- MS-39265 - Hose Rubber, Hydraulic, Pressure Type, Six Spiral Wrap Reinforcement (for Engineer Equipment) (No Superseding Document)
- MS-39266 - Hose Assembly, Rubber: Hydraulic, Pressure Type, Length Measurement (No Superseding Document)
- MS-39267 - Hose, Rubber: Hydraulic, Pressure Type Minimum Bend Radius (See MIL-DTL-52471 and MIL-DTL-52525)
- MS-39305 - Hose, Rubber. Oil Suction, Wire Reinforced (Superseded by MIL-H-52544)
- MS-39306 - Hose Assembly, Rubber, Hydraulic, Oil Suction, With Reusable Couplings
- MS-39316 - Hose Assemblies, Hydraulic, Single Wire Braid Reinforcement, With Reusable Couplings (Use MIL-H-52471/1)
- MS-39317 - Hose Assemblies, Hydraulic, Double Wire Braid Reinforcement, With Reusable Couplings (Superseded by MIL-H-52471/2, Now MIL-DTL-52471/2)
- MS-39318 - Hose Assemblies, Hydraulic, 4 Spiral Wrap Reinforcement, With Reusable Couplings (Superseded by MIL-H-52471/3, Now MIL-DTL-52471/3)
- MS-39319 - Hose Assembly, Hydraulic, 6-Spiral Wrap Reinforcement, With Reusable Couplings (No Superseding Document)
- MS-39320 - Hose Assembly: Measurement of Coupling Orientation Angle (No Superseding Document)
- MS-39325 - Hose Assemblies; Air (Type I) and Vacuum (Type II) Brake 3/8 Inch Nominal Diameter
- MS-39361 - Hose, Rubber, Hydraulic, Pressure Type, Four Spiral Light Wire Reinforcement (No Superseding Document)
- MS-500077 - Hose Assembly, Rubber: Hydraulic and Pneumatic, Medium Pressure, Female 37 Degrees Flared Tube
- MS-500083 - Hose Assembly, Nonmetallic. Hydraulic and Pneumatic, High Pressure, Female 37 Degrees Flared Tube
- MS-51008 - Hose, Preformed, Flexible, Engine Coolant 1-1/4, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 3 I.D. (Superseded by SAE-J20)
- MS-52103 - Hose Assembly, Nonmetallic: Fuel and Oil, Medium Pressure, Flared Tube
- MS-52104 - Hose Assembly, Rubber: Fuel and Oil, Low Pressure, Flared Tube
- MS-52130 - Hose, Nonmetallic, Straight, Engine Coolant (Superseded by SAE-J20)
- MS-8000 - Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-to-Flare
- MS-8001 - Hose Assembly, Polyetrafluorothylene, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
- MS-8002 - Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flare-to-Flange
- MS-8003 - Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flange
- MS-8004 - Hose Assembly, Polytetrafluoroethylene, Reusable Fittings, High Temperature, Medium Pressure, Flange-to-Flange
- MS-8005 - Hose Assembly, Polytetrafluoroethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flare
- MS-8006 - Hose Assembly, Polytetrafluoroethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
- MS-8007 - Hose Assembly, Polytetrafluoroethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flange
- MS-8008 - Hose Assembly, Polytetrafluorethylene, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flange
- MS-8009 - Hose Assembly, Polyetetrafluorethylene, Permanently Attached fittings, High Temperature, Medium Pressure, Flange-to-Flange
- MS-87027 - Hose, Rubber, Lightweight, Medium Pressure, Fuel and Oil Resistant (Superseded by MIL-H-83797/1, Now MIL-DTL-83797/1)
- MS-87028 - 87032 - HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS (Superseded BY MIL-H-83796/1 THRU MIL-H-83796/9, NOW MIL-DTL-83796/1 THRU MIL-DTL-83796/9)
- NAS-1369 - Duct, Air, Flexible and Semi-Rigid
- NAS-1370 THRU 1379 - Duct, Air, Flexible, Helix Wire Supported
- NAS-1688 - Hose Assembly, Tetrafluoroethylene, High Temperature, Medium Pressure, Flared
- NAS-1690 - Hose Assembly, Polytetrafluoroethylene, High Temperature, High Pressure, Flared
- NAS-1691 - Hose Assembly, Polytetrafluoroethylene, High Temperature, High Pressure, Flareless
- NAS-520 - Coupling, Flexible, Low Pressure, 450 Degrees Fahrenheit Air Line
- NAS-521 - Coupling, Flexible, Low Pressure, 250 Degrees F, Air Line
- NAS-522 - Coupling, Flexible, Low Pressure Air Line
- QPL-13444 - Hose and Hose Assemblies, Rubber: Fuel and Oil
- QPL-13531 - Hose, Rubber and Hose Assembly, Rubber (Hydraulic, Pneumatic, Flexible)
- QPL-17666 - Hose, Metal, Corrugated Bronze, High Pressure Air Service
- QPL-18158 - Hose Assembly, Air Duct, Low Pressure, Fabric, Wire Stiffened, Retractable, Naval Shipboard Portable Ventilating Set Use
- QPL-18160 - Hose Assemblies, Corrugated Steel, 200 Psi and 425 Degrees F. Maximum Steam Service Rating
- QPL-18288 - Hose and Hose Assemblies, Aircraft, Self Sealing, Aromatic Fuel
- QPL-19030 - Hose Assembly, Rubber, Wire Reinforced, 200 Psig, Maximum Saturated Steam Service (Superseded by MIL-H-28596)
- QPL-19606 - Hose and Hose Assemblies, Synthetic Rubber, Reinforced, Water-and Oil-Resistant, Medium and High Pressure, Nonmagnetic and Regular Service
- QPL-2217 - Hose Assemblies, Wire-Reinforced Synthetic Rubber, Submarine Rescue Chamber
- QPL-22240 - Hose and Hose Assemblies, Rubber 6-Inch and 7-Inch, Reattachable Couplings and Adapters
- QPL-22706 - Duct and Scuff Cover, Pneumatic, Flexible (No Superseding Document)
- QPL-24135 - Hose, Synthetic Rubber, Wire Reinforced for Flexible Hose Assemblies, General Specification For
- QPL-24592 - Hose Assembly, Tetrafluoroethylene Tube, Noncollapsible, High Temperature (No Superseding Document)
- QPL-25458 - Tubing, Rubber, Silicone, for Inflight Feeding
- QPL-25579 - Hose Assembly, Polytetrafluorethylene, High Temperature, Medium Pressure, General Specification for
- QPL-26124 - Duct, Pneumatic, Flexible (Superseded by MIL-D-22706)
- QPL-26499 - Hose Assembly, Metal, Flexible, Breathing Oxygen
- QPL-26626 - Hose Assembly, Reinforced, Cryogenic, Oxygen
- QPL-26633 - Hose Assembly, Polytetrafluoroethylene, Oxygen
- QPL-26686 - Hose Assembly, Tetrafluoroethylene Red White Fuming Nitric Acid Resistant (No Superseding Document)
- QPL-27267 - Hose, Polytetrafluoroethylene, 450Deg F, Medium Pressure
- QPL-2815 - Hose, Rubber, Diver S Air Supply
- QPL-32330 - Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut, General Specification for
- QPL-38360 - Hose Assembly, Tetrafluoroethylene, High Temperature, 3000 Psi, Hydraulic and Pneumatic (No Superseding Document)
- QPL-3992 - Hose and Hose Assembly, Rubber: Air and Vacuum Brake, Systems
- QPL-4722 - Hose Assembly, High Pressure, Breathing Oxygen (No Superseding Document)
- QPL-52471 - Hose and Hose Assembllies, Rubber, Hydraulic, Pressure Type, General Specification For
- QPL-5593 - Hose, Aircraft, Low Pressure Air and Vacuum, Flexible
- QPL-5878 - Adapter, Pressure Fuel Servicing, Types A-1 and A-6
- QPL-6000 - Hose, Rubber (Fuel, Oil, Coolant, Water and Alcohol)
- QPL-604 - Hose Assembly, Tetraflworethylene, 400 F 3000 Psi Hydraulic Heavy Braid (Superseded by QPL-SAE-as604)
- QPL-62165 - Hose and Hose Assembly, Thermoplastic, Hydraulic, Flexible (No Superseding Document)
- QPL-7061 - Hose, Aircraft, Self-Sealing, Aromatic Fuel (No Superseding Document)
- QPL-81581 - Hose Assemblies, Breathing Oxygen and Air, General Specification for (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
- QPL-83298 - Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic
- QPL-83797 - Hose, Rubber, Lightweight, Medium Pressure, General Specification For
- QPL-83797/1 - Hose, Rubber, Lightweight, Medium Pressure, Fuel and Oil Resistant (Superseded by QPL-83797)
- QPL-83797/9 - Qualified Products List of Products Qualified Under Miltary Specification, MIL-H-83797
- QPL-8788 - Hose, Rubber, Hydraulic, High Pressure (3,000 PSI)
- QPL-8790 - Hose Assemblies, Rubber, Hydraulic High Pressure (3000 Psi)
- QPL-8794 - Hose, Elastomeric - Hydraulic Fluid, Fuel, and Oil Resistant
- QPL-AS-1339 - Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 PSI, 400 Degrees F, Lightweight, Hydraulic and Pneumatic (See Notice 2 for Replacement Information)
- QPL-AS-604 - Hose Assembly, Polytetrafluorethylene, Metallic Reinforced, 3000 PSI, 400 Degrees F, Lightweight, Hydraulic (See Notice 2 for Replacement Information)
- QPL-ZZ-H-428 - Hose; Non-Metallic and Hose; Preformed: (for the Coolant Systems of Automotive and Other Liquid-Cooled Engines) (No Superseding Document)
- QPL-ZZ-H-617 - Hose, Rubber, Windshield Wiper
- RR-H-651 - Hose, Metallic, Flexible, Interlocking (Cancelled, 1974, Nos/S Document)
- RR-T-791 - Tubing, Flexible, Aluminum Alloy (Cancelled, 1961, Superseded By WW-T-816 (Renumbered))
- SAE-J1754/1 - Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document
- SAE-J1754/2 - Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information
- SAE-J1754/3 - Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information
- SAE-J1942 - Hose and Hose Assemblies for Marine Applications
- SAE-J343 - Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
- WW-H-1053 - Hose, Metal (Flexible, Aluminum Alloy, & Corrosion Resistant& Heat Resistant Steel)
- WW-T-816 - Tubing, Flexible, Aluminum Alloy (Cancelled, 1967, Use WW-H-1053)
- ZZ-H-428 - Hose; Non-Metallic & Hose; Preformed: (for the Coolant Systems of Automotive & Other L
- ZZ-H-461 - Hose & Hose Assembly, Rubber, Gas (Acetylene-Hydrogen, Air &Oxygen
- ZZ-H-466 - Hose Assembly, Metal (Rubber Covered), Hydrocarbon Conveying
- ZZ-H-471 - Hose, Gasoline, Synthetic-Rubber Wire-Stiffened +Cancelled,1967, No S/S Document+
- ZZ-H-496 - Hose, Pneumatic, Braided +Cancelled, 1966, No S/S Document+
- ZZ-H-499 - Hose, Pneumatic, Wrapped +Cancelled, 1966, Superseded By ZZ-H-500
- ZZ-H-500 - Hose, Rubber, & Hose Assemblies, Rubber: Pneumatic (Yarn Orfabric Reinforced)
- ZZ-H-515 - Hose, Rubber (Sleeves, Dredging) +Cancelled, 1978, No S/S Document+
- ZZ-H-521 - Hose & Hose Assemblies, Nonmetallic, Spray
- ZZ-H-530 - Hose, Sprinkler, Garden Type (Soaker) +Cancelled, 1966, S/Sby L-H-520
- ZZ-H-541 - Hose, Rubber, Steam +Cancelled, 1973, See MIL-H-28596
- ZZ-H-561 - Hose, Rubber, & Hose Assemblies, Rubber, Smooth Bore, Watersuction & Discharge
- ZZ-H-601 - Hose & Hose Assemblies, Rubber (Yarn or Fabric Reinforced) Water Service
- ZZ-H-617 - Hose, Rubber, Windshield Wiper
- ZZ-S-451 - Sleeves, Dredging +Cancelled, 1966, Superseded By ZZ-H-515
- ZZ-T-831 - Tubing; Rubber & Plastic