FSC 4710: Pipe, Tube and Rigid Tubing
The following documents are a part of this series:
ASTM:
ISO:
US GOVERNMENT DOCUMENTS:
- A-A-59512 - Tube, Metallic, Seamless - Cobalt Alloy (1 Inch O.D.)
- A-A-996 - Pipe, Plastic
- AMS-2223 - Tolerances Copper and Copper Alloy Seamless Tubing
- AMS-2243 - Tolerances, Corrosion and Heat-Resistant Steel Tubing
- AMS-2253 - Tolerances, Carbon and Alloy Steel Tubing
- AMS-4922 - Titanium Alloy, Seamless Hydraulic Tubing, 15V - 3.0Cr - 3.0Al - 3.0Sn, Cold Worked and Precipitation Heat Treated
- AMS-4942 - Titanium Tubing, Seamless, Annealed, 40.0 Ksi (275 Mpa) Yield Strength
- AMS-4943 - Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al - 2.5V Annealed
- AMS-4944 - Titanium Alloy Tubing, Seamless, Hydraulic, 3.0Al - 2.5V, Cold Worked, Stress Relieved
- AMS-5053 - Steel Tubing, Welded, 0.13 Carbon, Maximum Annealed
- AMS-5075 - Steel Tubing, Seamless, 0.22 - 0.28C (SAE 1025), Cold Drawn and Stress Relieved
- AMS-5554 - Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Annealed
- AMS-5556 - Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (347) Solution Heat Treated
- AMS-5557 - Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321), Solution Heat Treated
- AMS-5558 - Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Thin Wall Solution Heat Treated
- AMS-5559 - Steel, Corrosion and Heat-Resistant, Welded Tubing, 18Cr - 10.5Ni - 0.40Ti (SAE 30321), Thin Wall, Solution Heat Treated
- AMS-5562 - Steel, Corrosion and Heat Resistant, Seamless Tubing, 9.0Mn - 20Cr - 6.5Ni - 0.28N, Solution Heat Treated
- AMS-5563 - Steel, Corrosion Resistant, Seamless or Welded Tubing, 19Cr - 9.5Ni (SAE 30304), Cold Drawn, 1/4 Hard Temper
- AMS-5564 - Steel, Corrosion Resistant, Tubing 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper
- AMS-5565 - Steel, Corrosion Resistant, Welded Tubing, 19Cr - 9.5Ni (304), Solution Heat Treated
- AMS-5566 - Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr - 10Ni (304) High Pressure, Cold Drawn
- AMS-5567 - Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr - 10Ni (SAE 30304), Solution Heat Treated
- AMS-5568 - Steel, Corrosion and Heat Resistant, Welded Tubing, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated, Precipitation-Hardenable
- AMS-5572 - Steel, Corrosion and Heat-Resistant, Seamless Tubing, 25Cr - 20Ni (SAE 30310S), Solution Heat Treated
- AMS-5573 - Steel, Corrosion and Heat-Resistant, Seamless Tubing, 17Cr - 12Ni - 2.5Mo (SAE 30316), Solution Heat Treated
- AMS-5577 - Steel, Corrosion and Heat Resistant, Welded Tubing, 25Cr - 20Ni (SAE 30310), Solution Heat Treated
- AMS-5578 - Steel, Corrosion & Heat-Resistant, Welded Tubing, 12Cr - 8.5NI - 0.30Cb - 1.1Ti - 2.0Cu, V
- AMS-5580 - Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed
- AMS-5581 - Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb), Annealed
- AMS-5582 - Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe, Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength
- AMS-5583 - Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe, Vacuum Melted, Solution Heat Treated, Precipitation Hardenable to 170 ksi (1172 MPa) Tensile Strength
- AMS-5585 - Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15N Solution Heat Treated
- AMS-5586 - Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr, Consumable Electrode Remelted or Vacuum Induction Melted, Annealed
- AMS-5587 - Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe, Solution Heat Treated
- AMS-5588 - Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe, Solution Heat Treated
- AMS-5589 - Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted, 1775 Deg F (968 Deg C), Solution Heat Treated
- AMS-5590 - Nickel Alloy, Corrosion & Heat Resistant, Seamless Tubing, 52.5NI - 19Cr - 3.0Mo - 5.1Cb -
- AMS-5591 - Steel, Corrosion and Heat-Resistant, Tubing, Seamless, 12.5Cr (SAE 51410), Annealed
- AMS-5896 - Steel, Corrosion & Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr - 10.5NI -
- AMS-6361 - Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength
- AMS-6362 - Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.28- 0.33C) (SAE 4130), 150 ksi (1034 MPa) Tensile Strength
- AMS-6371 - Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
- AMS-6373 - Steel, Welded Tubing, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
- AMS-6374 - Steel Tubing, Seam-Free, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)95.0 ksi (655 MPa) Tensile Strength
- AMS-6441 - Steel Tubing, Mechanical 1.45Cr (0.98 - 1.10C) (SAE 52100) for Bearing Applications
- AMS-6530 - Steel Tubing, Seamless 0.50Cr - 0.55NI - 0.20Mo (0.28 - 0.33C) (SAE 8630) +Superseded By AMS-6360
- AMS-STD-183 - Continuous Identification Marking of Iron & Steel Products
- AMS-T-6735 - Tubing, Chrome-Molybdenum, 4135 Steel, Seamless Aircraft Quality
- AMS-T-6736 - Tubing, Chrome-Molybdenum (4130 or 8630) Steel, Seamless & Welded
- AMS-T-6845 - Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition (STABILIZED Jul 2013)
- AMS-T-7081 - Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality (Cancelled Sep 2007, Superseded by AMS4083, AMS4081)
- AMS-T-8506 - Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded (Cancelled Aug 2007)
- AMS-WW-T-700 - Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for (NONCURRENT Sep 2007)
- AMS-WW-T-700/1 - Tube, Aluminum, Drawn, Seamless, 1100
- AMS-WW-T-700/2 - Tube, Aluminum Alloy, Drawn, Seamless, 3003 (Cancelled Apr 2007, Superseded by ASTM-B210, Alloy 3003)
- AMS-WW-T-700/6 - Tube, Aluminum Alloy, Drawn, Seamless, 6061 (STABILIZED Sep 2015)
- AMS-WW-T-700/7 - Tube, Aluminum Alloy, Drawn, Seamless, 7075 (NONCURRENT Feb 2008)
- ANSI-A13.1 - Scheme for the Identification of Piping Systems (Now Numbered: ASME-a13.1)
- API-5A - Casing, Tubing, & Drill Pipe +Canc. S/S API-5Ct & API-5D
- API-SPEC-5CT - Specification for Casing and Tubing
- AS-33611 - Tube Bend Radii
- ASME-B31.1 - Code on Power Piping
- AWWA-C106 - Cast Iron Pipe, Centrifugally Cast in Metal Molds, for Water or Other Liquids (Co-numbered ANSI A21.6)
- AWWA-C214 - Tape Coatings for Steel Water Pipe
- AWWA-C600 - Installation of Ductile-Iron Mains and Their Appurtenances
- DOD-STD-2187 - Chemical Cleaning of Salt Water Piping Systems (Metric)
- FED-STD-183 - Continuous Identification Marking of Iron & Steel Products
- L-P-315 - Pipe, Plastic (Polyethylene, Pe, SDR-Pr)
- L-P-320 - Pipe & Fittings, Plastic (Polyvinyl Chloride, Pvc, Drain, Waste, & Vent, Dwv)
- L-P-322 - Pipe & Fitting, Plastic (Acrylonitrilebutadiene Styrene, +Cancelled, 1983, No S/S Docu
- L-P-545 - Plastic Tubing (Polyethylene, Flexible) +Cancelled, S/Sby L-P-315
- MAM-2243 - Steel, Corrosion and Heat Resistant Tubing, Tolerances, Metric
- MAM-2253 - Tolerances, Metric, Carbon & Alloy Steel Tubing
- MIL-B-13492 - Brass, Leaded, Tubing, Seamless
- MIL-DTL-15119 - Tubing, Round, Seamless Alloy Steel
- MIL-DTL-23226 - Tube and Pipe, Corrosion-Resistant Steel, Seamless (UNS S30400, S30403, S34700, and S34800) (Classified, See Your Contracting Officer)
- MIL-DTL-25995 - Pipe, Aluminum Alloy, Drawn or Extruded
- MIL-L-24055 - Lining, Lead for Steel Pipe (No Superseding Document)
- MIL-L-2824 - Lining, Rubber (Synthetic), for Salt-Water Lines
- MIL-N-24590 - Nickel Chromium Iron Alloy Heat Transfer Tubing (Controlled Distribution)
- MIL-P-11087 - Pipe, Steel: Grooved or Plain Ends
- MIL-P-1144 - Pipe, Corrosion-Resistant, Stainless Steel, Seamless or Welded (Future Acquisition Use MIL-P-24691/3)
- MIL-P-14529 - Pipe, Extruded, Thermoplastic (No Superseding Document)
- MIL-P-19119 - Pipe, Plastic, Rigid, Unplasticized, High Impact, Polyvinylchloride (Use ASTM-D-1785)
- MIL-P-20167 - Steel, Plate, Marine-Boiler (Superseded by QQ-S-691)
- MIL-P-20220 - Pipe, Lead, Lining, for Iron Pipe and Steel Tubing
- MIL-P-21264 - Pipe, Drainage, Zinc-Bituminous Coated, Corrugated Iron or Steel, Unpaved and Paved (Use WW-P-405)
- MIL-P-22245 - Pipe and Pipe Fittings, Glass Fiber Reinforced Plastic (Superseded by ASTM-D2996)
- MIL-P-22561 - Pipe and Pipe Fittings, Acid Resistant (Superseded by ASTM-C1053 and ASTM-B861)
- MIL-P-22634 - Pipe and Pipefittings, Polyethylene for Low-Pressure Waste and Drainage Systems (No Superseding Document)
- MIL-P-23290 - Pipe and Pipe Fittings, Iron, Saran Lined (Superseded by MIL-P-22561)
- MIL-P-236 - Pipe, Culvert, Nestable
- MIL-P-24338 - Pipe, Carbon Steel, Seamless (Controlled Distribution)
- MIL-P-24608 - Pipe, Fittings, & Adhesive Kits, Glass Reinforced Thermosetting Epoxy Resin for Shipboard Piping Systems
- MIL-P-24691 - Pipe and Tube, Carbon, Alloy and Stainless Steel, Seamless and Welded, General Specification For
- MIL-P-24691/1 - Pipe and Tube, Carbon Steel, Seamless
- MIL-P-24691/2 - Pipe and Tube, Chromium-Molybdenum Steel, Seamless
- MIL-P-24691/3 - Pipe and Tube, Corrosion-Resistant, Stainless Steel, Seamless or Welded
- MIL-P-24691/COMPLETE - Pipe and Tube, Carbon,Alloy and Stainless Steel,Seemless,Welded - All Slash Numbers
- MIL-P-25995 - Pipe, Aluminum Alloy, Drawn or Extruded
- MIL-P-2780 - Pipe, Brass, Seamless, Iron-Pipe Size, Standard and Extra Strong (Use WW-P-351)
- MIL-P-28584 - Pipe and Pipe Fittings, Glass Fiber Reinforced Plastic, Adhesive Bonded Joint Type, for Condensate Return Lines (No Superseding Document)
- MIL-P-29206 - Pipe and Pipe Fittings, Glass Fiber Reinforced Plastic, for Liquid Petroleum Lines (No Superseding Document)
- MIL-P-3107 - Pipe, Steel: Water-Well, With Coupling (Superseded by ASTM-a589)
- MIL-P-52189 - Plastic Tubing, Laminated, Thermosetting, Nylon Fabric Base, Phenolic Resin
- MIL-P-52559 - Pipe, Steel, Weight-Coated, for Submarine Pipeline Systems (No Superseding Document)
- MIL-P-82054 - Pipe and Fittings Asbestos Reinforced Thermosetting Plastic
- MIL-P-82056 - Pipe and Pipe Fittings, Plastic, for Drain, Waste, and Vent Service (Superseded by ASTM-D2661 and ASTM-D2665)
- MIL-P-82090 - Pipe, Coupling, Steel (Buttress Thread) (Superseded by API-Spec-5a)
- MIL-PRF-62410 - Tube Assembly Metal: Swaged Hydraulic, (M1, Tank)
- MIL-S-20167 - Steel, Plate, Marine-Boiler
- MIL-STD-1627 - Bending of Pipe or Tube for Ship Piping Systems
- MIL-T-10794 - Tubes, Aluminum-Alloy, Extruded Pipeline Section, With Grooved Nipple Welded on Each End (No Superseding Document)
- MIL-T-13322 - Tubing, Brass, Seamless (for Primer Bodies)
- MIL-T-1368 - Tube and Pipe, Nickel-Copper Alloy, Seamless and Welded
- MIL-T-15005 - TUBES, CONDENSER AND HEAT EXCHANGER, COPPER-NICKEL ALLOYS (UNS C70600 and C71500)
- MIL-T-15089 - Tubing, Aluminum Alloy, Round, Seamless (for Rocket Motors)
- MIL-T-15119 - Tubing, Round, Seamless Alloy Steel
- MIL-T-16286 - Tube, Steel, Seamless, Marine Boiler Application
- MIL-T-16343 - Tubing, Steel, Carbon, Structural (Superseded by ASTM-a500)
- MIL-T-16420 - Tube, Copper-Nickel Alloy, Seamless and Welded (Copper Alloy Numbers 715 and 706)
- MIL-T-16690 - Tubing, Steel, (8640, 8740, 4135 or 4140) Seamless, Mechanical (Use ASTM a519)
- MIL-T-16992 - Tube, Aluminum-Brass Arsenical (Copper Alloy No. 687), Condenser and Heat Exchanger
- MIL-T-17011 - Tubes, Copper, Condenser and Heat Exchanger
- MIL-T-17168 - Tube and Pipe, Wrought Iron, Welded (Navy)
- MIL-T-17188 - Tube, Carbon Steel, Electric Resistance Welded, Marine Boiler (No Superseding Document)
- MIL-T-17339 - Tubing, Aluminum Alloy, Clad, Round, Seamless (for Rocket Motor)
- MIL-T-18063 - Tube and Pipe, Corrosion-Resisting Steel, Seamless and Welded, Nuclear Plant Service
- MIL-T-18165 - TUBE and PIPE, CHROMIUM-MOLYBDENUM ALLOY STEEL, SEAMLESS (FUTURE ACQUISITION USE MIL-P-24691/2)
- MIL-T-18912 - Tubing, Steel, for 3.25 Inch and 5.O Inch Od Rocket Motors (No Superseding Document)
- MIL-T-20155 - Tubing, Steel, Alloy, Molybdenum, Seamless (No Superseding Document)
- MIL-T-20157 - Tube and Pipe, Carbon Steel, Seamless
- MIL-T-20168 - Tubes, Brass, Seamless (Superseded by ASTM-B43)
- MIL-T-20169 - Tubing, Steel, Resistance-Welded (for Oil, Steam, or Water)
- MIL-T-20219 - Tube, Brass, Voice and Pneumatic (Copper Alloy No. 260)
- MIL-T-21494 - Tube, Aluminum Alloy 5086, Round, Seamless (Extruded or Drawn) (Use WW-T-700/5)
- MIL-T-21597 - Tube, Aluminum Alloy 5456, Round, Seamless (Extruded or Drawn)
- MIL-T-22214 - Tube, Condenser and Heat Exchanger With Integral Fins (Uns Alloy Nos. C17500, C70600, C12200)
- MIL-T-22555 - Tubing, Steel Low Carbon, Annealed, Pressure Type (Superseded by MIL-T-5066)
- MIL-T-22945 - Tube and Pipe, Nickel-Chromium-Iron Alloy Corrosion-Resisting, for Nuclear Plant Service
- MIL-T-23226 - Tube and Pipe, Corrosion-Resistant Steel, Seamless (Classified - See Your Contracting Officer)
- MIL-T-23227 - TUBE and PIPE, NICKEL-CHROMIUM-IRON ALLOY (CLASSIFIED - SEE YOUR CONTRACTING OFFICER)
- MIL-T-23520 - Tube and Pipe, Nickel-Copper Alloy, Seamless, Air Melted (Classified - See Your Contracting Officer)
- MIL-T-24107 - Tube, Copper (Seamless) (Copper Alloy Numbers C10100, C10200, C10300, C10800, C12000, C12200, and C14200)
- MIL-T-24108 - Tube, Condenser and Ferrule Stock, Inhibited Admiralty Metal (Copper Alloy Numbers 443, 444, and 445) (Use WW-T-756)
- MIL-T-3235 - Tube, Copper, Seamless (for Torpedo Use) (No Superseding Document)
- MIL-T-3249 - Tube, Oil, Long Form, 125 Ml
- MIL-T-3520 - Tubing, Steel (Low-Carbon) Mechanical Round (No Superseding Document)
- MIL-T-3595 - Tubing, Phosphor Bronze: (CDA No. 510) Round, Seamless
- MIL-T-425 - Tube, Steel: Pipeline Section; with Grooved Nipple Welded on Each End
- MIL-T-4377 - Tubing-Welded, Round, Carbon Steel Structural (Use QQ-T-830)
- MIL-T-46072 - Tube, Round, Copper Alloy Numbers 330, 331, 332, and 370 (Leaded Brass), Seamless (No Superseding Document)
- MIL-T-46155 - Tube, Aluminum Alloy, Drawn, Seamless, 6063, T832 (Superseded by ASTM-B210)
- MIL-T-5066 - Tubing, Carbon Steel (1025), Seamless and Welded (Aircraft Quality) (Superseded by SAE AMS-T-5066)
- MIL-T-52010 - Tube, Corrosion Resisting Steel, Mechanical Seamless and Welded (Use ASTM-a511 and ASTM-a554)
- MIL-T-52069 - Tube, Commercial Bronze, Seamless (for Microwave Use).
- MIL-T-52070 - Tube Nickel, Seamless (for Electronic Use)
- MIL-T-52089 - Tube, Steel, Carbon, Mechanical, Shapes Other Than Round, Seamless and Welded.
- MIL-T-52234 - Tube, Aluminum Alloy 5083 and 5086, Square, Seamless, Extruded or Drawn
- MIL-T-5695 - Tubing, Steel, Corrosion-Resistant (304), Cold Drawn
- MIL-T-6013 - Tubing, Copper-Silicon-Manganese, Round, Seamless, Annealed, Hydraulic Systems (Navy)
- MIL-T-6731 - Tubing, Chrome-Molybdenum (4130) Steel Welded (Superseded by MIL-T-6736)
- MIL-T-6732 - Tubing, Chrome Nickel Molybdenum (8630), Steel, Seamless (Superseded by SAE AMS-T-6736)
- MIL-T-6733 - Tubing, Chrome Nickel Molybdenum (8735) Steel Stainless (Superseded by MIL-T-6735)
- MIL-T-6734 - Tubing, Chrome Nickel Molybdenum (8630) Steel Welded (Superseded by MIL-T-6736)
- MIL-T-6735 - Tubing, Chrome-Molybdenum, 4135 Steel, Seamless Aircraft Quality (Users May Refer To SAE AMS-T-6735 as a Possible Replacement)
- MIL-T-6736 - Tubing, Chrome-Molybdenum, 4130 Steel, Seamless and Welded, Aircraft Quality (Users May Refer To SAE AMS-T-6736 as a Possible Replacement)
- MIL-T-6737 - Tubing, Steel, Corrosion and Heat Resisting (18-8 Stabilized), Welded (Superseded by SAE AMS-5575 and SAE AMS-5576)
- MIL-T-6845 - Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition (Superseded by SAE AMS-T-6845)
- MIL-T-6945 - Tubing, Brass Seamless (Superseded by ASTM-B135)
- MIL-T-7081 - Tube, Aluminum Alloy, Seamless, Round, Drawn 6061, Aircraft Hydraulic Quality (Superseded by SAE AMS-T-7081)
- MIL-T-7840 - Tubing, Nickel Chromium Iron Alloy, Seamless or Welded, (for Aircraft Applications) (Superseded by SAE AMS-5580)
- MIL-T-81231 - Tubing, Carbon Steel, Galvanized, Round
- MIL-T-8231 - Tubes: Copper-Silicon-Bronze, Seamless, for Aircraft (No Superseding Document)
- MIL-T-8504 - Tubing, Steel, Corrosion-Resistant (304), Aerospace Vehicle Hydraulic Systems, Annealed, Seamless and Welded
- MIL-T-8506 - Tubing, Steel, Corrosion-Resistant, (304) Annealed, Seamless and Welded (Superseded by SAE AMS-T-8506)
- MIL-T-8606 - Tubing, Steel, Corrosion-Resistant (18-8 Stabilized and Extra Low Carbon) (Use SAE AMS-5560, SAE AMS-5563, SAE AMS-5564, SAE AMS-5565, SAE AMS-5566, SAE AMS-5567, SAE AMS-5569, SAE AMS-5570, SAE AMS-5571, SAE AMS-5639 AND SAE AMS-5668)
- MIL-T-8808 - Tubing, Steel, Corrosion-Resistant (18-8 Stabilized), Aircraft Hydraulic Quality (Use SAE AMS-5556 and SAE AMS-5557)
- MIL-T-8887 - Tubing, Steel, Corrosion-Resistant, Heat-Resistant, Stabilized, Welded, Thin Wall (Asg) (No Superseding Document)
- MIL-T-8973 - Tubing, Steel, Corrosion and Heat Resistant, for Aerospace Vehicle Hydraulic Systems Assembled by Brazing (Superseded by SAE AMS-5897)
- MS-14300 - Tube, Copper, Seamless (for Use With Solder Flared or Compression Type Fittings)
- MS-14301 - Pipe, Steel (Seamless and Seamed) (for Ordinary Use) (Superseded by ASTM-a120)
- MS-14302 - Pipe, Copper, Seamless, Standard Sizes (Superseded by ASTM-B42)
- MS-33529 - Tolerance-Seamless Steel Tubing, Aircraft Airframe, Round (Superseded by SAE AMS-2253)
- MS-33530 - Tolerance-Welded Carbon and Alloy Steel Tubing (Asg) (Superseded by SAE AMS-2253)
- MS-33531 - Tolerance, Welded Corrosion-Resistant Steel Tubing (Asg) (Superseded by SAE AMS-2243)
- MS-33532 - Square and Rectangular Tubing - Carbon Steel and Alloy Steel .35 Carbon, Maximum (No Superseding Document)
- MS-33534 - Standard Dimensions for Streamline and Oval Tubular Shapes
- MS-33536 - Tolerance-Seamless Steel Tubing, Mechanical, Round (No Superseding Document)
- MS-33611 - Tube Bend Radii (Superseded by SAE as-33611)
- NAS-357 - Tube, Control, Aluminum Alloy
- QPL-22245 - Pipe and Pipe Fittings, Glass Fiber Reinforced Plastic (No Superseding Document)
- QPL-24608 - Pipe, Fittings, and Adhesive Kits, Glass Reinforced Thermosetting Epoxy Resin for Shipboard Piping Systems (No Superseding Document)
- QQ-A-200/12 - Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, 7079
- QQ-C-806 - Culvert and Underdrain, Corrugated Iron or Steel, Zinc Coated +Canc, 1969, Superseded By WW-P
- QQ-T-825 - Tube, Steel, Alloy, Mechanical, Round,Seamless
- QQ-T-830 - Tube, Steel, Carbon, Mechanical, Seamless and (Cancelled, 1973, Use ASTM-a513 & ASTM-a
- SAE-J1677 - Tests and Procedures for Carbon Steel and Low Alloy Steel Tubing
- SAE-J2045 - Performance Requirements for Fuel System Tubing Assemblies
- SAE-J2254 - Fluid Power Piping Cleaning Process
- SAE-J476 - Dryseal Pipe Threads (STABILIZED Feb 2013)
- SAE-J524 - Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
- SAE-J525 - Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring
- SAE-J526 - Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing
- SAE-J533 - Flares for Tubing
- SS-P-385 - Pipe, Steel, (Cement-Mortar Lining and Reinforced +Cancelled, 1978, No S/S Document+
- WW-P-1432 - Pipe, Steel (Coal Tar Enamel Or Cement Mortar Lining, And Coal Tar Enamel Coated And Wrapped (CANCELED, 1995, REFER TO AWWA-C205 OR AWWA-203)
- WW-P-351 - Pipe, Red Brass, (Copper Alloy No. 230), Seamless Standard Pipe Size, Regular & Extra-Strong (Replaced by ASTM B43)
- WW-P-356 - Pipe, Cast-Iron, Drainage, Vent, & Waste (Threaded) (Cancelled, 1974, Use ASTM-a74)
- WW-P-360 - Pipe, Cast Iron, Pressure, (for Gas, Water or Other Liquids) (Cancelled, 1973, Use ASTM-a377)
- WW-P-377 - Pipe, Copper, Seamless, Standard Sizes
- WW-P-380 - Pipe and Fittings, Plastic, Rigid(Styrene Rubber Drain and Sewer) Cancelled, 1967, Use L-P-1221
- WW-P-401 - Pipe & Pipe Fittings, Cast-Iron, Soil
- WW-P-402 - Pipe, Corrugated (Aluminum Alloy)
- WW-P-404 - Pipe, Steel (Seamless & Welded, Black & Zinc Coated) (Galvanized)
- WW-P-405 - Pipe, Corrugated (Iron or Steel, Zinc Coated)
- WW-P-406 - Pipe, Steel (Seamless and Welded) (Cancelled, 1983, Use ASTM-a120)
- WW-P-421 - Pipe, Cast Gray & Ductile Iron, Pressure (for Water & Otherliquids)
- WW-P-441 - Pipe, Wrought Iron, (Welded, Black or Zinc Coated) (Cancelled, 1970, Use WW-P-406)
- WW-T-700 - Tube, Aluminum & Aluminum Alloy, Drawn, Seamless, General Specification For
- WW-T-700/1 - Tube, Aluminum, Drawn, Seamless, 1100
- WW-T-700/2 - Tube, Aluminum, Alloy, Drawn, Seamless, 3003
- WW-T-700/3 - Tube, Aluminum Alloy, Drawn, Seamless, 2024
- WW-T-700/4 - Tube, Aluminum Alloy, Drawn, Seamless, 5052
- WW-T-700/5 - Tube, Aluminum Alloy, Drawn, Seamless, 5086
- WW-T-700/6 - Tube, Aluminum Alloy, Drawn, Seamless, 6061
- WW-T-700/7 - Tube, Aluminum Alloy, Drawn, Seamless, 7075
- WW-T-700/COMPLETE - Complete Set of Current Slash Sheets for WW-T-700
- WW-T-731 - Tube, Steel and Open Hearth Iron, Seamless and Welded, Boiler Use (Cancelled, 1973, Use ASTM-a178 and ASTM-a192)
- WW-T-756 - Tube, Condenser and Ferrule Stock, Inhibited Admiralty Metal (Copper Alloy Number 443 444 and 445) (Canceled, 1972, No Replacement)
- WW-T-775 - Tube, Copper; Seamless (for Air Conditioning and Refrigeration) Cancelled, 1979, Use ASTM-B280
- WW-T-783 - Tube, Aluminum Alloy, Round, Square, Rectangular and Other Shapes, Drawn Seamless 1100 - Cancelled, 1963, Use WW-B-700/1
- WW-T-785 - Tube, Aluminum Alloy, Round, Square, Rectangular, and Other Shapes, Drawn Seamless 2024 - Cancelled, 1963, Use WW-T-700/3
- WW-T-787 - Tube, Aluminum Alloy, Round, Square, Rectangular and Other Shapes, Drawn Seamless 5052 - Cancelled, 1963, Use WW-T-700/4
- WW-T-788 - Tube, Aluminum Alloy, Round, Square, Rectangular and Other Shapes, Drawn Seamless 3003 - Cancelled, 1963, Use WW-T-700/2
- WW-T-789 - Tube, Aluminum Alloy, Round, Square, Rectangular and Other Shapes, Drawn Seamless 6061 and 6062 - Cancelled, 1963, Use WW-T-700/6
- WW-T-791 - Tube, Brass Seamless (Cancelled 1993, Use ASTM-B135)
- WW-T-797 - Tube, Copper, (Seamless) (Cancelled, 1972, Use MIL-T-24107)
- WW-T-799 - Tube, Copper, Seamless, Water (for Use With Solder- Flared- or Compression-Type Fittings
- WW-T-825 - Tube, Magnesium-Alloy, Extruded (Cancelled, 1994, Use ASTM-B107)
- WW-U-536 - Union, Malleable-Iron or Steel, 300-Pound +Cancelled, 1969,Use WW-U-531