FSC 34GP: Metalworking Machinery -- General
The following documents are a part of this series:- AGMA-2000 - Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)
- ANSI-B11.1 - Machine Tools - Mechanical Power Presses Safety Requirements for Construction, Care, and Use
- ANSI-B5.10 - Machine Tapers
- ANSI-B5.40 - Spindle Noses and Tool Shanks for Horizontal Boring Machines
- ANSI-B5.8 - Chucks and Chuck Jaws
- ANSI-B5.9 - Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes & Automatic Lathes
- ANSI-B6.1 - Gears, Spur, Coarse-Pitch Involute, Tooth Proportions for -68R74
- ANSI-B74.3 - Diamond or CBN Abrasive Products, Shape and Sizes of, Specification for
- ANSI-B92.1 - Involute Splines and Inspection
- ANSI-C1 - See: NFPA-70 and ASQC-C1
- ANSI-C113.1 - See: NFPA-79
- ANSI-MC96.1 - Temperature Measurement Thermocouples (Use ISA-MC96.1)
- ANSI-O1.1 - Woodworking Machinery - Safety Requirements
- ANSI-Z55.1 - Industrial Apparatus & Equipment, Gray Finishes For
- ASME-B5.10 - Machine Tapers
- ASME-B5.50 - 7/24 Taper Tool to Spindle Connection for Automatic Tool Change
- AWS-Z49.1 - Safety In Welding And Cutting And Allied Processes (See: ANSI-Z49.1)
- EIA-227 - One-Inch Perforated Tape
- EIA-244 - Character Code for Numerical Machine Control Perforated Tape, 1992; NO REPLACEMENT)
- EIA-267 - Axis and Motion Nomenclature for Numerically Controlled Machines (STABILIZED May 2016)
- EIA-274 - Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines
- EIA-281 - Electrical and Construction Standards for Numerical Machine Control
- EIA-358 - American National Standard Code for Information Interchange for Numerical Machine Control (STABILIZED May 2016)
- EIA-494 - 32 Bit Binary CL (BCL) and 7 Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled Machines (STABILIZED May 2016)
- EIA-RS-227 - Tape, Perforated, One Inch
- EIA-RS-267 - Machines, Numerically Controlled, Axis and Motion Nomenclature for
- EIA-RS-274 - Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines (STABILIZED Jun 2016)
- GGG-D-645 - Drill Chucks and Check Keys +Superseded by GGG-C-350
- MIL-C-4087 - Color Conditioning of Machinery and Shop Equipment, General Specification for
- MIL-HDBK-702 - Engineering Practices Productivity Enhancement of Industrial Plant Equipment and Production Support Systems
- MIL-W-12683 - Welding, Joint Designs, Data for Structures Other Than Armor (Use MIL-STD-22)
- MIL-W-27664 - Welding, Spot, Inert-Gas Shielded Arc (No Superseding Document)
- NAS-910 - Horizontal Boring, Drilling & Milling Machine
- NAS-954 - Numerically Controlled Horizontal Boring, Drilling and Milling Machine
- NAS-978 - Numerically Controlled Machining Center (Combination Drilling, Boring, Milling and Tapping Machines)
- NAS-995 - Specification for Computerized Numerical Control (CNC)
- NEMA-EW6 - Guidelines for Precautionary Labeling for Arc-Welding and Cutting Products
- NEMA-ICS5 - Industrial Control and Systems: Control Circuit and Pilot Devices
- NEMA-ICS9 - Industrial Control & Systems Power Circuit Accessories
- NFPA-T2.24.1 - Hydraulic Fluid Power-Systems Standard for Stationary Industrial Machinery
- RMA-IP-7 - Specification for Rubber Welding Hose
- UL-499 - Standard for Electric Heating Appliances