Document Center is acquired by Nimonik

FSC 3439: Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories

The following documents are a part of this series:

ASTM:

• ASTM-E120 - Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
• ASTM-E146 - Methods of Chemical Analysis of Zirconium and Zirconium Alloys (Silicon, Hydrogen, and Copper) (Withdrawn 1989)

US GOVERNMENT DOCUMENTS:

• A-A-50291 - Brazing Alloys, Aluminum & Magnesium, Filler Metal
• A-A-50963 - Soldering Iron, Self Heating (Without Electric or External Heat)
• A-A-50971 - Soldering Iron, Non-Electric (Soldering Coppers)
• A-A-51128 - Torch Kit, Soldering (Propane Gas)
• A-A-51145 - Flux, Soldering, Non-Electronic, Paste and Liquid
• A-A-51153 - Cleaning Sets, Oxygen and Acetylene, Welding and Cutting Torch Tips
• A-A-51157 - Rods & Electrodes, Welding, Bare, Copper & Copper Alloy
• A-A-51158 - Rods, Welding, Copper & Copper Alloy, for Oxyfuel Gas Welding
• A-A-51161 - Holders, Electrode, Shielded Metal, Arc Welding
• A-A-51165 - Moisture Stabilizer, Welding Electrode
• A-A-51173 - Rods & Electrode, Welding, Bare, Nickel & Nickel Alloy
• A-A-51182 - Wire, Welding, Hard Facing, Cobalt Base Alloy
• A-A-55013 - Holders, Electrode, Shielded Metal, Arc Welding, Tong Type
• A-A-58061 - Soldering - Desoldering Station
• A-A-59284 - Soldering Iron, Electric
• A-A-59307 - Soldering Guns, Electric
• A-A-59315 - Powder Materials for Flame and Plasma Sprayed Coatings, General Requirements for
• A-A-59315/1 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Aluminum, Type I, Class 2
• A-A-59315/10 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Aluminum, Type I, Class 2
• A-A-59315/11 - Powder Materials for Flame and Plasma Sprayed Coatings Pure Nickel, Type I, Class 1
• A-A-59315/12 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Base Alloy, Type I, Class 1
• A-A-59315/13 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Base Alloy, Type I, Class 2
• A-A-59315/14 - Powder Materials for Flame and Plasma Sprayed Coatings Type 316 Stainless Steel, Type I, Class 2
• A-A-59315/15 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chromium-Boron, Type I, Class 1
• A-A-59315/16 - Powder Materials for Flame and Plasma Sprayed Coatings Molybdenum, Type I, Class 1
• A-A-59315/17 - Powder Materials for Flame and Plasma Sprayed Coatings Cobalt-Chromium-Tungsten, Type I, Class 2
• A-A-59315/18 - Powder Materials for Flame and Plasma Sprayed Coatings Cobalt-Chromium-Nickel-Tungsten, Type I, Class 1
• A-A-59315/19 - Powder Materials for Flame and Plasma Sprayed Coatings Copper-Nickel, type I, Class 2
• A-A-59315/2 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum-Bronze, Type I, Class 2
• A-A-59315/20 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Chromium Alloy, Type I, Class 1
• A-A-59315/21 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chromium-Aluminum, Type I, Class 2
• A-A-59315/22 - Powder Materials for Flame and Plasma Sprayed Coatings Silicon-Aluminum Plus Polymer, Type I, Class 1
• A-A-59315/23 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chrome-Aluminum-Iron-Molybdenum, Type I, Class 2
• A-A-59315/24 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type I, Class 1
• A-A-59315/25 - Powder Materials for Flame and Plasma Sprayed Coatings Molybdenum-Aluminum-Nickel Alloy, Type I, Class 2
• A-A-59315/26 - Powder Materials for Flame and Plasma Sprayed Coatings Copper-Aluminum Composite, Type I, Class 2
• A-A-59315/27 - Powder Materials for Flame and Plasma Sprayed Coatings Molybdenum-Nickel-Aluminum, Type I, Class 2
• A-A-59315/28 - Powder Materials for Flame and Plasma Sprayed Coatings Carbon Steel-Molybdenum-Aluminum, Type I, Class 2
• A-A-59315/29 - Powder Materials for Flame and Plasma Sprayed Coatings Iron-Molybdenum-Aluminum, Type I, Class 2
• A-A-59315/3 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum-Bronze, Type I, Class 1
• A-A-59315/30 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type II, Class 1
• A-A-59315/31 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type II, Class 2
• A-A-59315/32 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide, Type II, Class 1
• A-A-59315/33 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide, Type II, Class 2
• A-A-59315/34 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum Oxide, Type II, Class 1
• A-A-59315/35 - Powder Materials for Flame and Plasma Sprayed Coatings Alumina Titania, Type II, Class 1
• A-A-59315/36 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Oxide, Type II, Class 1
• A-A-59315/37 - Powder Materials for Flame and Plasma Sprayed Coatings Magnesium Zirconate, Type II, Class 1
• A-A-59315/38 - Powder Materials for Flame and Plasma Sprayed Coatings Zirconium Oxide, Type II, Class 2
• A-A-59315/39 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide Nickel Chromium Alloy (Fine) Type III
• A-A-59315/4 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum-Silicon Alloy, Type I, Class 2
• A-A-59315/40 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type II, Class 2
• A-A-59315/41 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide Plus Nickel Aluminum Composite, Self Fluxing Alloy, Type III
• A-A-59315/42 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide Plus Nickel Chromium Alloy, Coarse, Type III
• A-A-59315/43 - Powder Materials for Flame and Plasma Sprayed Coatings Magnesium Zirconate Plus Nickel Aluminum Composite, Type III
• A-A-59315/44 - Powder Materials for Flame and Plasma Sprayed Coatings Magnesium Zirconate Plus Nickel Chromium Alloy, Type III
• A-A-59315/45 - Powder Materials for Flame and Plasma Sprayed Coatings Composite Blend, Type II
• A-A-59315/5 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum (CP), Type I, Class 2
• A-A-59315/6 - Powder Materials for Flame and Plasma Sprayed Coatings Cobalt Base, Type I, Class 2
• A-A-59315/7 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Chromium Alloy, Type I, Class 1
• A-A-59315/8 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Chromium Alloy, Type I, Class 2
• A-A-59315/9 - Powder Materials for Flame and Plasma Sprayed Coatings Pure Molybdenum, Type I, Class 2
• A-A-59368 - Soldering/Desoldering, Station
• AMS-2813 - Packaging and Marking of Packages of Welding Wire Standard Method
• AMS-2814 - Packaging and Marking of Packages of Welding Wire, Premium Quality
• AMS-2815 - Identification Welding Wire, Line Code System
• AMS-2816 - Identification Welding Wire, Tab Marking Method
• AMS-3410 - Flux, Silver Brazing
• AMS-3411 - Flux, Silver Brazing, High Temperature
• AMS-4188/1 - Aluminum Alloy, Welding Wire 4.5cu 0.70ag 0.30mn 0.25mg 0.25ti (Cancelled Dec 2002, Superseded by AMS4233)
• AMS-4188/2 - Aluminum Alloy, Welding Wire 4.6cu 0.35mn 0.25mg 0.22ti (Cancelled Dec 2002, Superseded by AMS4244
• AMS-4188/3 - Aluminum Alloy, Welding Wire 5.0si 1.2cu 0.50mg (Cancelled Dec 2002, Superseded by AMS4245)
• AMS-4188/4 - Aluminum Alloy, Welding Wire 7.0si 0.30mg (Cancelled Dec 2002, Superseded by AMS4188)
• AMS-4188/5 - Aluminum Alloy, Welding Wire 7.0si 0.52mg (Cancelled Dec 2002, Superseded by AMS4246)
• AMS-4190 - Aluminum Alloy, Welding Wire 5.2Si (4043)
• AMS-4246 - Aluminum Alloy Welding Wire 7.0SI - 0.52MG (357)
• AMS-4740 - Copper Powder, 99.0 Cu, Minimum, As Fabricated
• AMS-4755 - Solder, Lead-Silver 94PB - 5.5AG
• AMS-4756 - Solder 97.5PB - 1.5AG - 1SN
• AMS-4776 - Nickel Alloy, Brazing Filler Metal, 73NI - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 17
• AMS-4778 - Nickel Alloy, Brazing Filler Metal, 92Ni - 4.5Si - 3.1B, 1800 to 1900 Deg F Solidus-Liquidus Range
• AMS-4784 - Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature, 50Au - 25Pd - 25Ni, 2015 to 2050 Deg F (1102 to 1121 Deg C) Solidus-Liquidus Range
• AMS-4785 - Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range
• AMS-4786 - Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range
• AMS-4951 - Titanium Welding Wire Commercially Pure Environment Controlled Packaging
• AMS-5027 - Steel, Welding Wire, 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C), Vacuum Melted, Environment-Controlled Packaging
• AMS-5028 - Steel, Welding Wire, 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC), Vacuum Melted, Environment-Controlled Packaging
• AMS-5675 - Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 70Ni - 2.4Mn - 15.5Cr - 3.0Ti - 7.0Fe
• AMS-5679 - Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe
• AMS-5683 - Alloy Welding Wire, Corrosion and Heat Resistant 75Ni - 15.5Cr - 8.0Fe (STABILIZED Apr 2017)
• AMS-5708 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated
• AMS-5741 - Bars & Forgings, Steel, Corrosion & Heat Resistant 13.5Cr-26NI-1.75mo-3Ti Consumable Elect
• AMS-5748 - Steel Bars, Forgings, and Rings, Corrosion Resistant 14cr 13.5co 5.0mo 0.50ni 0.20v Premium Quality, Consumable Electrode Melted (Cancelled Apr 1992)
• AMS-5775 - Electrodes, Welding, Covered, Corrosion and Heat Resistant Steel 16.5CR - 4.5NI - 2.9MO - 0.10N
• AMS-5776 - Steel, Corrosion & Heat-Resistant, Welding Wire, 12.5Cr, (SAE 51410)
• AMS-5778 - Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72Ni - 15.5Cr - 1.0Cb(Nb) - 2.4Ti - 0.70Al - 7.0Fe
• AMS-5779 - Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 75NI - 15CR - 1.5 (CB + TA) - 1.9TI - 0.55AL - 5.5FE
• AMS-5781 - Steel Welding Electrodes, Covered, Corrosion & Moderate Heatresistant, 15.5Cr - 4.5NI- 2.
• AMS-5784 - Steel, Corrosion and Heat-Resistant, Welding Wire 29Cr - 9.5Ni
• AMS-5786 - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe
• AMS-5789 - Cobalt Alloy, Corrosion & Heat-Resistant, Welding Wire, 54Co- 25.5Cr - 10.5NI - 7.5W
• AMS-5790 - Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb, High Ferrite Grade
• AMS-5798 - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18Fe
• AMS-5799 - Nickel Alloy, Corrosion & Heat Resistant, Covered Welding Electrodes 48NI-212Cr-1.5Co-9.0m
• AMS-5803 - Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable Electrode or Vacuum Induction Melted
• AMS-5804 - Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V
• AMS-5805 - Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V, Vacuum Induction Melted, Environment Controlled Packaging
• AMS-5809 - Alloy Welding Wire, Corrosion & Heat Resistant 52Co-20Cr-20NI-7.5Ta +Canc, Superseded By AMS-5814
• AMS-5813 - Steel Wire, Welding, Corrosion and Moderate Heat Resistant 15cr 7.1ni 2.4mo 1al (Cancelled Apr 2003, Superseded by AMS-5812)
• AMS-5814 - Cobalt Alloy, Corrosion & Heat Resistant, Welding Wire, 52Co - 20Cr - 20NI - 7.5Ta, Va
• AMS-5817 - Steel, Corrosion & Moderate Heat Resistant, Welding Wire, 13Cr - 2.0NI - 3.0W
• AMS-5821 - Steel, Corrosion Resistant, Welding Wire 12 CR (SAE 51410 Modified) Ferrite Control Grade
• AMS-5823 - Steel, Corrosion and Heat Resistant, Welding Wire, 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V
• AMS-5825 - Steel, Corrosion-Resistant, Welding Wire, 16.4Cr - 4.8Ni - 0.22Cb(Nb) - 3.6Cu
• AMS-5826 - Steel, Corrosion and Heat-Resistant, Welding Wire, 15Cr - 5.1Ni - 0.30Cb(Nb) - 3.2Cu
• AMS-5827 - Steel, Corrosion Resistant, Covered Welding Electrodes, 16.4Cr - 4.8NI - 0.22Cb - 3.6Cu
• AMS-5830 - Nickel-Iron Alloy, Corrosion and Heat-Resistant, Welding Wire, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 35Fe
• AMS-5831 - Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N
• AMS-5837 - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb(Nb)
• AMS-6453 - Steel, Welding Wire, 0.30Cr - 1.8Ni - 0.40Mo - (0.23 - 0.28C), Vacuum Melted, Environment Controlled Packaging
• AMS-6457 - Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Vacuum Melted, Environment Controlled Packaging
• AMS-6458 - Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging
• AMS-6459 - Steel, Welding Wire, 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C), Vacuum Melted
• AMS-6460 - Wire, Steel Welding, 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10-0,17C)
• AMS-6461 - Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment Controlled Packaging (STABILIZED Oct 2016)
• AMS-6465 - Wire, Steel Welding, 2.0Cr - 10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C), Vacuum Melted, Environment Controlled Packaging (STABILIZED Aug 2017)
• AMS-6533 - Steel, Welding Wire, 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging (NONCURRENT April 2005)
• AWS-A5.11 - Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding (Now AWS-A5.11/A5.11M)
• AWS-A5.11/A5.11M - Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding
• AWS-A5.12 - Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting (Now AWS-A5.12M/A5.12)
• AWS-A5.12/A5.12M - Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting (ISO 6848:2004 MOD)
• AWS-A5.13 - Specification for Surfacing Electrodes for Shielded Metal Arc Welding
• AWS-A5.15 - Specification for Welding Electrodes and Rods for Cast Iron
• AWS-A5.16 - Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods (Now AWS-A5.16/A5.16M)
• AWS-A5.16/A5.16M - SPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES
• AWS-A5.17 - Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding (Now AWS-A5.17/A5.17M)
• AWS-A5.17/A5.17M - Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
• AWS-A5.18 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
• AWS-A5.18/A5.18M - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
• AWS-A5.2 - Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
• AWS-A5.20 - Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
• AWS-A5.21 - Specification For Bare Electrodes And Rods For Surfacing
• AWS-A5.22 - Specification For Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods (Now AWS-A5.22/A5.22M)
• AWS-A5.22/A5.22M - Specification For Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods
• AWS-A5.23 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding (Now AWS-A5.23/A5.23M)
• AWS-A5.25 - Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding (Now AWS-A5.25/A5.25M)
• AWS-A5.25/A5.25M - Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding
• AWS-A5.26 - Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding
• AWS-A5.27 - Welding, Oxyfuel Gas, Copper and Copper Alloy Rods for, Nolonger Avail.
• AWS-A5.28 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
• AWS-A5.29 - Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding (Now AWS-A5.29/A5.29M)
• AWS-A5.29/A5.29M - Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
• AWS-A5.2/A5.2M - Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
• AWS-A5.3 - Specification For Aluminum And Aluminum Alloy Electrodes For Shielded Metal Arc Welding
• AWS-A5.30 - Insert, Consumable
• AWS-C2.25 - Specification for Thermal Spray Freestock- Solid and Composite Wire and Ceramic Rods (Now AWS-C2.25/C2.25M)
• GGG-S-595 - Soldering Iron, Nonelectric, (Coppers) +Cancelled, 1986, S/Sby A-A-50971
• GGG-S-600 - Soldering Iron, Self Heating(Without Electricor External Heat) +Canc,1986,Superseded By A-A-5
• GGG-T-570 - Torch Kit, Soldering (Propane Gas)
• MIL-A-47193 - Aluminum Alloys, Brazing (No Superseding Document)
• MIL-B-15395 - Brazing Alloy, Silver (Superseded by QQ-B-654)
• MIL-B-20148 - Brazing Sheet, Aluminum Alloy (Superseded by SAE AMS-B-20148)
• MIL-B-24302 - Brazing System, Near Infrared Quartz Lamp (No Superseding Document)
• MIL-C-1143 - Carbon Block, Carbon Paste, and Carbon Rod
• MIL-C-13194 - Cloths, Cable Wiping, General Specific Tion for (No Superseding Document)
• MIL-C-17223 - Cleaner, Welding and Cutting Tip (Superseded by A-A-51153)
• MIL-C-45948 - Carbon Block, Carbon Paste, and Carbon Rods (No Superseding Document)
• MIL-D-45582 - Desoldering and Resoldering Kits, Electrical (No Superseding Document)
• MIL-DTL-13080 - Electrodes, Welding, Covered: Austenitic Steel (19-9 Modified) for Armor Applications
• MIL-DTL-22200/1 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium and High Tensile Steel, As-Welded or Stress-Relieved Weld Application
• MIL-DTL-23765 - Electrodes and Rods – Welding, Bare, Solid and Alloy-Cored, General Specification for
• MIL-DTL-23765/1 - Electrodes and Rods - Welding, Bare, Solid and Alloyed Cored, Ordinary Strength and Low-Alloy Steel
• MIL-DTL-23765/4 - Electrodes - Welding, Bare, Solid; and Fluxes, Submerged-Arc Welding, Carbon and Low-Alloy Steel
• MIL-DTL-24403/1 - Electrodes - Welding, Flux Cored, Ordinary Strength and Low Alloy Steel
• MIL-E-13080 - Electrode, Welding, Covered: Austenitic Steel(19-9 Modified)for Armor Applications
• MIL-E-13191 - Electrode, Welding, Covered, Bronze, for General Use (Superseded by AWS a5.6)
• MIL-E-13865 - Electrodes, Welding, Covered Steel, (for Hard Surfacing)(Super- Seded by MIL-E-19141)
• MIL-E-15597 - Electrodes, Welding, Covered, Coated Aluminum and Aluminum Alloy (Superseded by AWS-a5.3-91, and AWS-a5.01-87)
• MIL-E-15599 - Electrode, Welding, Covered, Low- and Medium-Carbon Steel (Use QQ-E-450)
• MIL-E-16053 - Electrode, Welding, Bare, Aluminum Alloys (use ANSI/AWS A5.10-80)
• MIL-E-16589 - Electrode, Welding, Mineral Covered, Low Hydrogen, Chromium-Molybdenum Alloy Steel and Corrosion Resisting Steel (Superseded by MIL-E-22200/8)
• MIL-E-16715 - Electrode, Welding, Covered (Austenitic Chrome-Nickel Steel, for Corrosive and High Temperature Services) (Superseded by MIL-E-22200/2a)
• MIL-E-17496 - Electrodes, Welding, Covered, Nickel Base Alloy, and Cobalt Base Alloy (Use MIL-E-22200/3)
• MIL-E-17764 - Electrode, Cutting, Tubular, Steel, Covered (No Superseding Document)
• MIL-E-17777 - Electrodes, Cutting and Welding, Carbon-Graphite, Uncoated and Copper-Coated
• MIL-E-18038 - Electrodes, Welding, Mineral Covered, Low Hydrogen, Medium and High Tensile Steel as Welded or Stress-Relieved Weld Application ( Use MIL-E-22200/g)
• MIL-E-18193 - Electrodes, Welding, Carbon Steel and Alloy Steel, Bare, Coiled (Superseded by MIL-E-23765/1 and MIL-E-23765/4)
• MIL-E-19141 - Electrode, Welding, Surfacing, Iron Base Alloy
• MIL-E-19323 - Electrodes, Welding Covered, Copper-Nickel Alloy (Superseded by MIL-E-22200/4a)
• MIL-E-19822 - Electrode, Welding, Bare, High Yield Steel (Superseded by MIL-E-23765/2)
• MIL-E-19933 - Electrodes and Rods - Welding, Bare, Chromium and Chromium-Nickel Steels
• MIL-E-21562 - Electrodes and Rods-Welding, Bare, Nickel Alloy
• MIL-E-21659 - Electrodes, Welding, Bare, Copper and Copper Alloy (Superseded by MIL-E-23765/3)
• MIL-E-22200 - Electrodes, Welding, Covered: General Specification For
• MIL-E-22200/1 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium & High Tensile
• MIL-E-22200/10 - Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen Medium, High Tensile and Higher-Strength Low Alloy Steels
• MIL-E-22200/11 - Electrodes, Welding, Mineral-Covered, Iron-Power, Low-Hydrogen, for Producing HY-130 Weldments To Be Heat-Treated
• MIL-E-22200/2 - Electrode, Welding Covered (Austenitic Chromium-Nickel Steel, for Corrosive and High Temperature Services)
• MIL-E-22200/3 - Electrodes, Welding, Covered, Nickel Base Alloy, and Cobalt Base Alloy
• MIL-E-22200/4 - Electrodes, Welding, Covered, Copper-Nickel Alloy
• MIL-E-22200/5 - Electrode, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen, Hightensile Low Alloy Steel-Heat-Treatable Only
• MIL-E-22200/6 - Electrode, Welding, Mineral Covered, Low Hydrogen, Medium and High Tensile Steel
• MIL-E-22200/7 - Electrodes, Welding, Covered, Molybdenum Alloy Steel Application (Superseded by AWS-a5.5)
• MIL-E-22200/8 - Electrodes, Welding, Covered, Low - Hydrogen, & Iron - Powder Low - Hydrogen, Chromium - Molybdenum Alloy Steel & Corrosion Resisting Steel
• MIL-E-22200/9 - Electrode, Welding, Mineral Covered, Low Hydrogen, Nickel Maganese Chromium Molybdenum Alloy Steel for Producing HY-130 Weldments for as Welded Application
• MIL-E-22200/COMPLETE - Complete Set of Current Slash Sheets for MIL-E-22200
• MIL-E-22749 - Electrodes (Bare) & Fluxes (Granular), Submerged Arc Welding, High Yield Low Alloy Steel (Superseded by MIL-E-23765/2)
• MIL-E-23765 - Electrodes and Rods - Welding, Bare, Solid and Alloyed Cored, General Specification For
• MIL-E-23765/1 - Electrodes and Rods - Welding, Bare, Solid and Alloyed Cored, Ordinary Strength and Low Alloy Steel
• MIL-E-23765/2 - Electrodes and Rods - Welding, Bare, Solid, or Alloy Cored; and Fluxes, Low Alloy Steel
• MIL-E-23765/3 - Electrode, and Rods - Welding, Bare, Solid Copper Alloy
• MIL-E-23765/4 - Electrodes - Welding, Bare, Solid; and Fluxes, Submerged Arc Welding, Carbon and Low Alloy Steels
• MIL-E-24355 - Electrodes, Welding, Bare, Solid Nickel Manganese Chromium Molybdenum Alloy Steel for Producing Hy 130 Weldments for Aswelded Applications
• MIL-E-24403 - Electrodes - Welding, Flux Cored General Specification For
• MIL-E-24403/1 - Electrodes - Welding, Flux Cored, Ordinary Strength & Low Alloy Steel
• MIL-E-24403/2 - Electrodes - Welding, Flux Cored, Low-Alloy Steel
• MIL-E-278 - Electrodes, Welding, Covered, Aluminum Bronze (Superseded by ANSI/AWS a5.6 and 5.13)
• MIL-E-45829 - Electrode, Welding, Copper, Silicon-Deoxidized, Solid, Bare
• MIL-E-6843 - Electrodes, Welding, Covered, Low-Alloy Steel (Primarily for Aircraft and Weapon Applications) (Superseded by AWS-a5.5)
• MIL-E-8697 - Electrodes, Welding, Covered, Low-Hydrogen, Heat-Treatable Steel (No Superseding Document)
• MIL-E-986 - Electrodes, Welding, Mineral Covered, Low Hydrogen-as-Welded Applications on High Strength Steels (Use MIL-E-22200/1)
• MIL-F-12784 - Flux, Soldering (Stearine Compound Ic-3) (No Superseding Document)
• MIL-F-14256 - Flux, Soldering, Liquid, Paste Flux, Solder Paste and Solder-Paste Flux, (for Electronic/Electrical Use), General Specification for (Superseded by J-STD-004, J-STD-005 and J-STD-006)
• MIL-F-18251 - Fluxes, Welding, Submerged Arc Process Carbon and Low-Alloy Steel Application (Superseded by MIL-E-23765/4)
• MIL-F-19922 - Fluxes, Welding (Compositions), Submerged Arc Process With Type ""B"" Electrodes, Carbon and Low-Alloy Steel Application (Superseded by MIL-E-23765/4)
• MIL-F-20329 - Flux, Soldering, Rosin Base, General Purpose (Superseded by O-F-506 & MIL-F-14256)
• MIL-F-6939 - Flux, Aluminum and Aluminum Alloy, Gas Welding (Superseded by SAE-AMS3414)
• MIL-F-6943 - Flux, Magnesium Alloy Welding
• MIL-F-7516 - Flux, Welding, Corrosion and Heat Resistant Alloy
• MIL-H-865 - Holder, Electrode, Shielded Metal, Arc Welding (Replaced by A-A-51161)
• MIL-I-23413 - Inserts, Welding, Filler Material, Coiled and Solid Rings
• MIL-M-45558 - Moisture Stabilizer, Welding Electrode (Superseded by A-A-51165)
• MIL-P-24389 - Programmer, Stress Relief for Near Infrared Quartz Lamp Furnace System (No Superseding Document)
• MIL-P-85856 - Powder Materials for Flame and Plasma Sprayed Coatings, General Specification for (Use A-A-59315)
• MIL-P-85856/1 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Aluminum, Type I, Class 2, Composition g (Use A-A-59315/1)
• MIL-P-85856/10 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Aluminum, Type I, Class 2, Composition H (Use A-A-59315/10)
• MIL-P-85856/11 - Powder Materials for Flame and Plasma Sprayed Coatings Pure Nickel, Type I, Class 1, Composition J (Use A-A-59315/11)
• MIL-P-85856/12 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Base Alloy, Type I, Class 1, Composition K (Use A-A-59315/12)
• MIL-P-85856/13 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Base Alloy, Type I, Class 2, Composition K (Use A-A-59315/13)
• MIL-P-85856/14 - Powder Materials for Flame and Plasma Sprayed Coatings Type 316 Stainless Steel, Type I, Class 2, Composition m (Use A-A-59315/14)
• MIL-P-85856/15 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chromium-Boron, Type I, Class 1, Composition N (Use A-A-59315/15)
• MIL-P-85856/16 - Powder Materials for Flame and Plasma Sprayed Coatings Molybdenum, Type I, Class 1, Composition P (Use A-A-59315/16)
• MIL-P-85856/17 - Powder Materials for Flame and Plasma Sprayed Coatings Cobalt-Chromium-Tungsten, Type I, Class 2, Composition R (Use A-A-59315/17)
• MIL-P-85856/18 - Powder Materials for Flame and Plasma Sprayed Coatings Cobalt-Chromium-Nickel-Tungsten, Type I, Class 1, Composition S (Use A-A-59315/18)
• MIL-P-85856/19 - Powder Materials for Flame and Plasma Sprayed Coatings Copper-Nickel, Type I, Class 2, Composition T (Use A-A-59315/19)
• MIL-P-85856/2 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum-Bronze, Type I, Class 2, Composition F (Use A-A-59315/2)
• MIL-P-85856/20 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chromium Alloy, Type I, Class 1, Composition U (Use A-A-59315/20)
• MIL-P-85856/21 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chromium-Aluminum, Type I, Class 2, Composition V (Use A-A-59315/21)
• MIL-P-85856/22 - Powder Materials for Flame and Plasma Sprayed Coatings Silicon-Aluminum Plus Polymer, Type I, Class 1, Composition W (Use A-A-59315/22)
• MIL-P-85856/23 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel-Chrome-Aluminum-Iron-Molybdenum, Type I, Class 2, Composition Dd (Use A-A-59315/23)
• MIL-P-85856/24 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type I, Class 1, Composition AA (Use A-A-59315/24)
• MIL-P-85856/25 - Powder Materials for Flame and Plasma Sprayed Coatings Molybdenum-Aluminum-Nickel Alloy, Type I, Class 2, Composition Bb (Use A-A-59315/25)
• MIL-P-85856/26 - Powder Materials for Flame and Plasma Sprayed Coatings Copper-Aluminum Composite, Type I, Class 2, Composition Ee (Use A-A-59315/26)
• MIL-P-85856/27 - Powder Materials for Flame and Plasma Sprayed Coatings Molybdenum-Nickel-Aluminum, Type I, Class 2, Composition Ff (Use A-A-59315/27)
• MIL-P-85856/28 - Powder Materials for Flame and Plasma Sprayed Coatings Carbon Steel-Molybdenum-Aluminum, Type I, Class 2, Composition Gg (Use A-A-59315/28)
• MIL-P-85856/29 - Powder Materials for Flame and Plasma Sprayed Coatings Iron-Molybdenum-Aluminum, Type I, Class 2, Composition Hh (Use A-A-59315/29)
• MIL-P-85856/3 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum-Bronze, Type I, Class 1, Composition F (Use A-A-59315/3)
• MIL-P-85856/30 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type Ii, Class 1, Composition a (Use A-A-59315/30)
• MIL-P-85856/31 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type Ii, Class 2, Composition a (Use A-A-59315/31)
• MIL-P-85856/32 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide, Type Ii, Class 1, Composition B (Use A-A-59315/32)
• MIL-P-85856/33 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide, Type Ii, Class 2, Composition B (Use A-A-59315/33)
• MIL-P-85856/34 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum Oxide, Type Ii, Class 1, Composition D (Use A-A-59315/34)
• MIL-P-85856/35 - Powder Materials for Flame and Plasma Sprayed Coatings Alumina-Titania, Type Ii, Class 1, Composition E (Use A-A-59315/35)
• MIL-P-85856/36 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Oxide, Type Ii, Class 1, Composition F (Use A-A-59315/36)
• MIL-P-85856/37 - Powder Materials for Flame and Plasma Sprayed Coatings Magnesium Zirconate, Type Ii, Class 1, Composition g (Use A-A-59315/37)
• MIL-P-85856/38 - Powder Materials for Flame and Plasma Sprayed Coatings Zirconium Oxide, Type Ii, Class 2, Composition H (Use A-A-59315/38)
• MIL-P-85856/39 - Powder Materials for Flame and Plasma Sprayed Coatings Chromium Carbide Plus Nickel Chromium Alloy (Fine), Type Iii, Composition C (Use A-A-59315/39)
• MIL-P-85856/4 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum Silicon Alloy, Type I, Class 2, Composition E (Use A-A-59315/4)
• MIL-P-85856/40 - Powder Materials for Flame and Plasma Sprayed Coatings Tungsten Carbide-Cobalt, Type Ii, Class 2, Composition J (Use A-A-59315/40)
• MIL-P-85856/41 - Powder Materials for Flame and Plasma Sprayed Coatings, Tungsten Carbide Plus Nickel Aluminum Composite, Self-Fluxing Alloy, Type Iii, Composition l (Use A-A-59315/41)
• MIL-P-85856/42 - Powder Materials for Flame and Plasma Sprayed Coatings, Chromium Carbide Plus Nickel Chromium Alloy (Coarse), Type Iii, Composition N (Use A-A-59315/42)
• MIL-P-85856/43 - Powder Materials for Flame and Plasma Sprayed Coatings, Magnesium Zirconate Plus Nickel Aluminum Composite, Type Iii, Composition P (Use A-A-59315/43)
• MIL-P-85856/44 - Powder Materials for Flame and Plasma Sprayed Coatings, Magnesium Zirconate Plus Nickel Chromium Alloy, Type Iii, Composition R (Use A-A-59315/44)
• MIL-P-85856/45 - Powder Materials for Flame and Plasma Sprayed Coatings, Composite Blend, Type Iii, Composition S (Use A-A-59315/45)
• MIL-P-85856/5 - Powder Materials for Flame and Plasma Sprayed Coatings Aluminum (Cp), Type I, Class 2, Composition D (Use A-A-59315/5)
• MIL-P-85856/6 - Powder Materials for Flame and Plasma Sprayed Coatings Cobalt Base, Type I, Class 2, Composition C (Use A-A-59315/6)
• MIL-P-85856/7 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Chromium Alloy, Type I, Class 1, Composition B (Use A-A-59315/7)
• MIL-P-85856/8 - Powder Materials for Flame and Plasma Sprayed Coatings Nickel Chromium Alloy, Type I, Class 2, Composition B (Use A-A-59315/8)
• MIL-P-85856/9 - Powder Materials for Flame and Plasma Sprayed Coatings Pure Molybdenum, Type I, Class 2, Composition a (Use A-A-59315/9)
• MIL-P-8853 - Paste, Copper Brazing, Water Thinning (Superseded by SAE-AMS3430)
• MIL-R-17131 - Rods and Powders, Welding, Surfacing
• MIL-R-18818 - Rods, Welding, Aluminum Bronze, Surfacing, Inert-Gas Tungsten-Arc Process (Use MIL-R-19631)
• MIL-R-19631 - Rod, Welding, Copper and Copper Alloy (See Notice 2 for Replacement Information)
• MIL-R-47191 - Rod, Welding, High Strength (No Superseding Document)
• MIL-R-5031 - Rod & Wire, Welding, Corrosion & Heat Resistant Alloys (See AWS a5.9-77 & a5.14-76)
• MIL-R-5632 - Rods and Wire, Steel, Welding (for Aircraft Applications) (Superseded by SAE-AMS6457, SAE-AMS6452, SAE-AMS6456, SAE-AMS6459, SAE-AMS6331, SAE-AMS6461, SAE-AMS6462, SAE-AMS6458, SAE-AMS5027 and SAE-AMS5028)
• MIL-R-6944 - Rods and Wire, Welding, Magnesium Alloys (Superseded by AWS a5.19-80)
• MIL-R-81588 - Rods and Wire, Weldingtitanium and Titanium Alloys (See Notice for Replacement Information)
• MIL-R-908 - Rod, Welding, Steel and Cast Iron (for Gas Welding) (Use AWS a5.2-69)
• MIL-S-3601 - Soldering Machine
• MIL-S-45847 - Soldering and Brazing Outfit, Resistance Heating (No Superseding Document)
• MIL-S-45864 - Soldering Irons, Non-Electric TL-624( )/U and TL-670( )/U
• MIL-S-4938 - Soldering Iron, Electric, 28 Volt Dc, 100 Watt (No Superseding Document)
• MIL-STD-1628 - Fillet Weld Size, Strength, and Efficiency Determination
• MIL-W-21149 - Welding Accessory Kit, Electric (No Superseding Document)
• MIL-W-47192 - Welding Rod and Wire, Nickel Alloy High Permeability, Shielding Grade (No Superseding Document)
• MIL-W-6712 - Wire, Metallizing (Superseded by AWS-C2.25/C2.25m)
• MIL-W-8939 - Welding, Resistance, Electronic Circuit Modules (Superseded by MIL-PRF-53095)
• MS-16857 - Electrode, Underwater Cutting, Tubular, Ceramic
• NAS-1514 - Radiographic Standard for Classification of Fusion Weld Discontinuities
• O-F-499 - Flux, Brazing, (Silver Brazing Filler Metal, Low Melting Point)
• O-F-506 - Flux, Soldering: Paste & Liquid
• QPL-13080 - Electrode, Welding, Covered, Austenitic Steel (19-9 Modified for Armor Application (No Superseding Document)
• QPL-14256 - Flux, Soldering, Liquid, Paste Flux, Solder Paste and Solder-Paste Flux, (for Electronic/Electrical Use), General Specification for (Superseded by J-STD-004, J-STD-005, J-STD-006)
• QPL-15597 - Electrodes, Welding, Covered, Coated, Aluminum and Aluminum Alloy (No Superseding Document)
• QPL-15599 - Electrode, Welding, Covered, Low and Medium- Carbon Steel (Use QQ-E-450)
• QPL-15716 - Electrodes, Welding, Covered, Molybdenum Alloy Steel Application
• QPL-16053 - Electrode, Welding, Bare, Aluminum Alloys (Use ANSI/AWS a5.10-80)
• QPL-16589 - Electrodes, Welding, Mineral Covered, Low Hydrogen, Chromium-Molybdenum Alloy Steel and Corrosion Resisting Steel
• QPL-18038 - Electrode, Welding, Mineral Covered, Low Hydrogen, Medium and High Tensile Steel as Welded or Stress-Relieved Weld Application
• QPL-19141 - Electrode, Welding, Surfacing, Iron Base Alloy
• QPL-19323 - Electrode, Welding, Covered, Copper Nickel Alloy
• QPL-19822 - Electrodes, Welding, Bare, High-Yield Steel (No Superseding Document)
• QPL-19933 - Electrodes and Rods - Welding, Bare, Chromium and Chromium-Nickel Steels
• QPL-21562 - Electrodes and Rods-Welding, Bare, Nickel Alloy
• QPL-22200 - Electrodes, Welding, Covered: General Specification for
• QPL-22749 - Electrode (Bare) and Fluxes (Granular), Submerged Arc Welding, High-Yield Low-Alloy Steels (See Notice for Replacement Information)
• QPL-23765 - Electrodes and Rods - Welding, Bare, Solid and Alloyed Cored, General Specification for
• QPL-24355 - Electrodes, Welding, Bare, Solid, Nickel-Manganese-Chromium Molybdenum Alloy Steel for Producing HY-130 Weldments for as-Welded Applications
• QPL-24403 - Electrodes-Welding, Flux Cored, General Specification for
• QPL-45057 - Electrodes Welding Mineral Covered Low Hydrogen for Repair Welding of Alloy Steel Castings
• QPL-6843 - Electrode, Welding, Covered, Mild and Alloy Steel (for Aircraft Applications
• QPL-8697 - Electrodes, Welding, Coating, Low Hydrogen, Heat-Treatable Steel (No Superseding Document)
• QPL-QQ-E-450 - Electrodes, Welding, Covered: Mild Steel (No Superseding Document)
• QPL-QQ-S-571 - Solder, Electronic (96 To 485 Deg. C) (Superseded by J-STD-004, J-STD-005, J-STD-006)
• QQ-B-650 - Brazing Alloys, Copper, Copper-Zinc, & Copper-Phosphorus
• QQ-B-654 - Brazing Alloys, Silver
• QQ-B-655 - Brazing Alloys, Aluminum & Magnesium, Filler Metal
• QQ-E-445 - Electrode, Tungsten, Arc-Welding +Cancelled, 1973, No S/S Document+
• QQ-E-450 - Electrodes, Welding, Covered: Mild Steel +Cancelled, 1985, Use ANSI/AWS-a5.1
• QQ-R-566 - Rods & Electrodes, Welding, Aluminum & Aluminum Alloys
• QQ-R-571 - Rod, Welding, Copper & Nickel Alloy
• QQ-S-551 - Solder, Brazing +Cancelled, 1963, No S/S Document+
• QQ-S-561 - Solder, Silver
• QQ-S-571 - Solder, Electronic (96 To 485 Deg C)
• W-S-564 - Soldering Guns, Electric
• W-S-570 - Soldering Iron, Electric