FSC 3416: Lathes
The following documents are a part of this series:- A-A-59180 - Lathe, Bench and Jeweler's, Horizontal Spindle
- A-A-59334 - Lathe, Engine (Standard) and Toolroom (Precision), Horizontal Spindle
- A-A-59346 - Lathe, Flatbed, Horizontal-Spindle, and Turning Center, Flatbed, Horizontal-Spindle, Computer Numeric Control (CNC) (No Superseding Document)
- A-A-59347 - Lathe, Slant-Bed, Horizontal-Spindle, and Turning Center, Slant-Bed, Horizontal-Spindle, Computer Numeric Control (CNC) (No Superseding Document)
- A-A-59353 - Lathe, Vertical-Bed, Horizontal-Spindle, and Turning Center, Vertical-Bed, Horizontal-Spindle, Computer Numeric Control (CNC) (No Superseding Document)
- A-A-60023 - Automated Manufacturing Machine, Computer Numerical Control Lathe, Flatbed, Horizontal Spindle
- A-A-60024 - Automated Manufacturing Machine, Computer Numerical Control Lathe, Slant Bed, Horizontal-Spindle
- A-A-60063 - Lathe, Engine (Standard) and Toolroom (Precision), Horizontal Spindle
- ANSI-B11.13 - Machine Tools, Single and Multiple Spindle Automatic Screw/Bar and Chucking Machines Safety Requirements for the Construction, Care, and Use
- CSA-N286.0.1 - Commentary on N286-12, Management system requirements for nuclear facilities
- MIL-C-4557 - Center, Lathe, Live (Supersedes 50483)
- MIL-L-11285 - Lathe, Engine, 9 by 22 Inch Capacity, Bench Type (No Superseding Document)
- MIL-L-1240 - Lathe, Engine, Motor Driven, Medium Duty, Shore and Non-Combatant Vessel Use
- MIL-L-13896 - Lathes, Engine, Gap, Sliding Bed and Removable Block (Superseded by A-A-59334)
- MIL-L-13898 - Lathe, Engine(8 1/2Inch Swing)
- MIL-L-17966 - Lathe, Engine, Geared Head, 17 Thru 26 Inch (Superseded by MIL-L-23400C)
- MIL-L-18075 - Lathes, Engine, Gap, Removable Block, Heavy and Medium Duty (Use MIL-L-13896)
- MIL-L-18686 - Lathe, Engine, Light Duty, 14-Inch Minimum Swing (Use MIL-L-23400 or MIL-L-23250)
- MIL-L-18765 - Lathe, Engine, Medium Duty, Nodular Iron Construction Naval Shipboard
- MIL-L-19263 - Lathe, Engine, Precision Cabinet Type, 10 Inch by 18 Inch Centers (Superseded by MIL-L-23531)
- MIL-L-19368 - Lathe, Engine, Motor Driven, Bench, 16 Inch Swing, Nodular Iron Construction, Submarine Use (No Superseding Document)
- MIL-L-20617 - Lathe, Engine, Motor Driven, Light Duty, 16 and 18 Inch (Superseded by MIL-L-17966)
- MIL-L-2127 - Lathes, Engine, Motor-Driven, Medium-Duty, 14-Inch (Sub-Marine Use)
- MIL-L-22381 - Lathe, Engine, Heavy Duty, 16 by 54 Inches (Use MIL-L-23257)
- MIL-L-23225 - Lathe, Precision, Instrument (Superseded by A-A-59180)
- MIL-L-23249 - Lathe, Engine & Tool Room 13 Through 17 Inch (Superseded by A-A-59334)
- MIL-L-23250 - Lathe, Engine or Toolroom, Back Gear Belt Drive, 12 Inch Through 17 Inch (No Superseding Document)
- MIL-L-23251 - Lathes, Engine and Toolroom 2516 and 3220 (Superseded by A-A-59334)
- MIL-L-23257 - Lathes, Engine and Toolroom, Sizes 1609 and 2013 (Superseded by A-A-59334)
- MIL-L-23374 - Lathes, Engine, Medium Duty, 2516 and 3220 (Superseded by MIL-L-23251)
- MIL-L-23376 - Lathes, Engine, Toolmakers, 10-Inch, Heavy Duty (Use MIL-L-80007)
- MIL-L-23400 - Lath, Engine & Tool Room, 19, 20 + 25 Inch 7-1/2 To 15 Hp (Superseded by A-A-59334)
- MIL-L-23531 - Lathe, Engine, Toolmakers, 10 Inch, Light Duty (Use MIL-L-80007)
- MIL-L-23851 - Lathe, Engine, Heavy Duty (2013)54 Inch Centers, Preselect Spindle Speeds (Use MIL-L-23257)
- MIL-L-23854 - Lathe, Turret, Vertical 46-Inch Swing (Use MIL-B-80012)
- MIL-L-4341 - Lathe, Engine, Floor&Mounted, 12&Inch Swing, Geared Head Drive, Light Duty (Supersedes 50306)
- MIL-L-4370 - Lathe, Engine, Heavy Duty, 4025, and 40 Inch Swing, Raised and Hollow Spindle (Superseded by MIL-L-13896)
- MIL-L-4448 - Lathe, Engine, Floor Mounted, Sliding Gap Bed 180 Inches Long, 50 Inches Open, 25 Inches Closed, Rated Swing, Geared Head Drive
- MIL-L-45100 - Lathe, Turret, Horizontal (No Superseding Document)
- MIL-L-4527 - Lathe, Engine, Floor Mtd, Solid Bed, 16 and 20 Inch Geared Head Drive (Superseded by MIL-L-23257)
- MIL-L-4533 - Lathe, Turret, Horizontal, Universal, Ram Type (No Superseding Document)
- MIL-L-45817 - Lathe, Engine, Pedestal Type, 16-Inch Swing, Light Duty.
- MIL-L-4584 - Lathe, Jeweler S, 4-Inch (Use MIL-L-23225)
- MIL-L-45943 - Lathe, Engine, Floor Mounted, 17 Inch Swing (No Superseding Document)
- MIL-L-45958 - Lathe, Engine, Floor-Mounted 28-Inch Swing (No Superseding Document)
- MIL-L-45990 - Lathe, Engine, 13-Inch Swing (No Superseding Document)
- MIL-L-80006 - Lathe, Turret, Horizontal, Universal, Saddle Type
- MIL-L-80007 - Lathes, Toolroom, 11-Inch Through 13-Inch (Superseded by A-A-59334)
- MIL-L-80018 - Lathes, Turret, Horizontal, Chucking, and Bar and Chucking, Automatic, Saddle Type (No Superseding Document)
- MIL-L-80032 - Lathe, Chucking and Lathe, Bar, Single Spindle, Horizontal, Automatic, Turret-In-Column Type (No Superseding Document)
- MIL-L-80053 - Lathes, Turret, Horizontal, Computer Numerical Controlled (Cnc) (Superseded by A-A-59346)
- MIL-L-80061 - Lath, Bench, Variable Speed, Plain and Turret, 9 Inch (Superseded by A-A-59180)
- MIL-L-80123 - Lathe, Chuckling, and Lathes, Bar, Single Spindle, Horizontal, Turret-In-Column Type, Automatic and Numerically Controlled by Perforated Tape
- MIL-L-80147 - Lathe, Turret, Horizontal, Bar and Chucking, Saddle Type, Numerically Controlled, Perforated Tape (Use MIL-L-80219)
- MIL-L-80219 - Lathes, Shaft Turning, Turret, Vertical Bed and Slant Bed, Computer Numerically Controlled (Cnc) (Superseded by A-A-59353)
- MIL-L-80234 - Lathe, Turret, Horizontal, Saddle Type, Chucking, Bar, Chucking and Bar, Manual 1Nput Numerical Control
- MIL-L-80245 - Lathe, Multiple Purpose, Chucking, Horizontal Spindle, Computer Numerically Controlled (Cnc) (Superseded by A-A-59347)
- MIL-L-80257 - Lathes, Turret, Horizontal Spindle, Bar and Chucking, Computer Numerically Controlled (Cnc) (Superseded by A-A-59347)
- MIL-L-80277 - Lathes, Precision, Toolroom, Variable Speed, 11-Inch Through 13-Inch (Superseded by A-A-59334)
- MIL-S-23378 - Screw Machine, Automatic, Single Spindle 1/2 Inch Trough 2-3/8 Inch Spindle Capacity (No Superseding Document)
- MIL-STD-931 - ATTACHMENT and ACCESSORIES FOR LATHES, METALWORKING (USE MIL-STD-979)
- OO-L-125 - Lathe, Engine & Toolroom, 10 Inch
- OO-L-126 - Lathe Engine, Floor Mounted, 12-Inch Rated Swing, +Cancelled, 1964, Use MIL-L-23249
- OO-L-127 - Lathe, Engine, Toolroom, Floor Mounted, 12, 14 & 16 +Cancelled, 1969, No S/S Document+
- OO-L-129 - Lathe, Engine, Floor Mounted 25, 32, 42 and 48 Inch +Cancelled, 1965, Use MIL-L-23251